Error while inserting data into BFILE datatype

Dear Experts,
I am trying to insert data into resume table, but it is throwing error:
create table resume(resume blob);
declare
f_lob bfile;
b_lob blob;
begin
insert into resume(resume) values(empty_blob())
return documents into b_lob;
f_lob := bfilename( 'RESUME_SAVE', 'Pawan-resume.doc' );
dbms_lob.fileopen(f_lob, dbms_lob.file_readonly);
dbms_lob.loadfromfile
( b_lob, f_lob, dbms_lob.getlength(f_lob) );
dbms_lob.fileclose(f_lob);
commit;
end;
return documents into b_lob;
ERROR at line 8:
ORA-06550: line 8, column 10:
PL/SQL: ORA-00904: "DOCUMENTS": invalid identifier
ORA-06550: line 7, column 2:
PL/SQL: SQL Statement ignored
Please help
Regards
Sunil Kumar

Thank you very much Mihael................... It works
But I think there is a mistake in oracle documentation, please check following link:
http://docs.oracle.com/cd/B10501_01/appdev.920/a96591/adl14cas.htm
Thanks & Regards
Sunil Kumar

Similar Messages

Error while inserting data into a table.

Hi All,
I created a table.While inserting data into the table i am getting an error.Its telling "Create data Processing Function Module".Can any one help me regarding this?
Thanx in advance
anirudh

Hi Anirudh,
Seems there is already an entry in the Table with the same Primary Key.
INSERT Statement will give short dump if you try to insert data with same key.
Why dont you use MODIFY statement to achieve the same.
Reward points if this Helps.
Manish

Error while Inserting data into flow table

Hi All,
I am very new to ODI, I am facing lot of problem in my 1st interface. So I have many questions here, please forgive me if it has irritated to you.
========================
I am developing a simple Project to load a data from an input source file (csv) file into a staging table.
My plan is to achieve this in 3 interfaces:
1. Interface-1 : Load the data from an input source (csv) file into a staging table (say Stg_1)
2. Interface-2 : Read the data from the staging table (stg_1) apply the business rules to it and copy the processed records into another staging table (say stg_2)
3. Interface-3 : Copy the data from staging table (stg_2) into the target table (say Target) in the target database.
Question-1 : Is this approach correct?
========================
I don't have any key columns in the staging table (stg_1). When I tried to execute the Flow Control of this I got an error:
Flow Control not possible if no Key is declared in your Target Datastore
With one of the response (the response was - "FLOW control requires a KEY in the target table") in this Forum I have introduced a column called "Record_ID" and made it a Primary Key column into my staging table (stg_1) and my problem has been resolved.
Question-2 : Is a Key column compulsary in the target table? I am working in BO Data Integrator, there is no such compulsion ... I am little confused.
========================
Next, I have defined one Project level sequence. I have mapped the newly introduced key column Record_Id (Primary Key) with the Project level sequence. Now I am got another error of "CKM not selected".
For this, I have inserted "Insert Check (CKM)" knowledge module in my Project. With this the above problem of "CKM not selected" has been resolved.
Question-3 : When is this CKM knowledge module required?
========================
After this, the flow/interface is failing while loading data into the intermediar ODI created flow table (I$)
1 - Loading - SS_0 - Drop work table
2 - Loading - SS_0 - Create work table
3 - Loading - SS_0 - Load data
5 - Integration - FTE Actual data to Staging table - Drop flow table
6 - Integration - FTE Actual data to Staging table - Create flow table I$
7 - Integration - FTE Actual data to Staging table - Delete target table
8 - Integration - FTE Actual data to Staging table - Insert flow into I$ table
The Error is at Step-8 above. When opened the "Execution" tab for this step I found the message - "Missing parameter Project_1.FTE_Actual_Data_seq_NEXTVAL RECORD_ID".
Question-4 : What/why is this error? Did I made any mistake while creating a sequence?

Everyone is new and starts somewhere. And the community is there to help you.
1.) What is the idea of moving data from stg_1 and then to stg_2 ? Do you really need it for any other purpose other than move data from SourceFile to Target DB.
Otherwise, its simple to move data from SourceFile -> Target Table
2.) Does your Target table have a Key ?
3.) CKM (Check KM) is required when you want to do constraint validation (Checking) on your data. You can define constraints (business rules) on the target table and Flow Control will check the data that is flowing from Source File to Target table using the CKM. All the records that donot satisfy the constraint will be added to E$ (Error table) and will not be added to the Target table.
4.) Try to avoid ODI sequences. They are slow and arent scalable. Try to use Database sequence wherever possible. And use the DB sequence is target mapping as
<%=odiRef.getObjectName( "L" , "MY_DB_Sequence_Row" , "D" )%>.nextval
where MY_DB_Sequence_Row is the oracle sequence in the target schema.
HTH

Error While Inserting Data into table using OAF

Hi Experts,
I am learning OAF; i am trying into insert the data into table using OAF. I followed the below procedure.
My table(OLF_TEST_TBL) Columns:
EmpID (Number), Ename(VARCHAR2 100), Sal Number, and who columns.
1. created Application Module (AM).
package: oracle.apps.mfg.simplepg.server
name: oaf_test_tbl_am
2. created simple page
name:EmployeePG
package:oracle.apps.mfg.simplepg.webui
3. Assigned the Application Module to Page
4. Created Entity Object(EO)
name:oaf_test_tbl_eo
package:oracle.apps.mfg.simplepg.schema.server
schema:apps
table:OLF_TEST_TBL
note:
1. EMPID column is selected as primary key
2. selected create method, remove method and validation method.
3.checked generate default view object
VO:
name:olf_test_tbl_vo
note: Entity Object was assigned to VO
Coming To page:
page main region:EmployeeMainRN
1.under main region i created one more region using wizard
selected AM and VO, region style-default single column
2. under main region i created one more region
region style- pagebuttonbar, ID:pagebutoonsRN
3. under pagebuttonRN, created two submit buttons(ID:SUBMIT, ID:CANCEL).
In AM java page:
created a method to insert row and for commit.
Insert Method:
public void insertrow(){
OAViewObject vo=(OAViewObject)getoaf_test_tbl_vo1();
if(!vo.isPreparedForExecution()){
vo.executeQuery();
Row row=vo.createRow();
vo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
Commit Method:
public void savaDataTooaftesttable(){
getDBTransaction().commit();
In EmployeeMainRN, created a controller.
In this controller process request method, 'insertrow' method was called.
import oracle.apps.fnd.framework.OAApplicationModule;
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
if (!pageContext.isFormSubmission())
OAApplicationModule am = pageContext.getApplicationModule(webBean);
am.invokeMethod("insertrow");
To commit the transaction when SUBMIT button pressed, commit method was called in process form request method.
import oracle.apps.fnd.framework.OAViewObject;
public void processformRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
if (pageContext.getParameter("SUBMIT") != null)
am.invokemethod("savaDataTooaftesttable");
Error After clicking the submit button_
I ran the page, page was opened successfully. Once i enter data and click submit button, it's giving the following error.
The requested page contains stale data. This error could have been caused through the use of the browser's navigation buttons (the browser Back button, for example). If the browser's navigation buttons were not used, this error could have been caused by coding mistakes in application code. Please check Supporting the Browser Back Button developer guide - View Object Primary Key Comparison section to review the primary causes of this error and correct the coding mistakes.
Cause:
The view object oaf_test_tbl_am.oaf_test_tbl_vo1700_oaf_test_tbl_vo1_practice_test_prc1_oracle_apps_mfg_simplepg_server_oaf_test_tbl_am.oaf_test_tbl_vo1 contained no record. The displayed records may have been deleted, or the current record for the view object may not have been properly initialized.
To proceed, please select the Home link at the top of the application page to return to the main menu. Then, access this page again using the application's navigation controls (menu, links, and so on) instead of using the browser's navigation controls like Back and Forward.
Experts, Kindly help me why i am getting this error.
Awating your replies.
Thanks in advance.

If you dont want to create message. You can throw exception like below as well
throw new OAException("Emp Id is "+empId+" and employee name is "+empName, OAException.CONFIRMATION);Thanks
--Anil

Error while insert data using execute immediate in dynamic table in oracle

Error while insert data using execute immediate in dynamic table created in oracle 11g .
first the dynamic nested table (op_sample) was created using the executed immediate...
object is
CREATE OR REPLACE TYPE ASI.sub_mark AS OBJECT (
mark1 number,
mark2 number
t_sub_mark is a class of type sub_mark
CREATE OR REPLACE TYPE ASI.t_sub_mark is table of sub_mark;
create table sam1(id number,name varchar2(30));
nested table is created below:
begin
EXECUTE IMMEDIATE ' create table '||op_sample||'
(id number,name varchar2(30),subject_obj t_sub_mark) nested table subject_obj store as nest_tab return as value';
end;
now data from sam1 table and object (subject_obj) are inserted into the dynamic table
declare
subject_obj t_sub_mark;
begin
subject_obj:= t_sub_mark();
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,subject_obj from sam1) ';
end;
and got the below error:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7
then when we tried to insert the data into the dynam_table with the subject_marks object as null,we received the following error..
execute immediate 'insert into '||dynam_table ||'
(SELECT

887684 wrote:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7The problem is that your variable subject_obj is not in scope inside the dynamic SQL you are building. The SQL engine does not know your PL/SQL variable, so it tries to find a column named SUBJECT_OBJ in your SAM1 table.
If you need to use dynamic SQL for this, then you must bind the variable. Something like this:
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,:bind_subject_obj from sam1) ' USING subject_obj;Alternatively you might figure out to use static SQL rather than dynamic SQL (if possible for your project.) In static SQL the PL/SQL engine binds the variables for you automatically.

Error by inserting data into a field of datatype LONG

Hi,
When inserting data into a field of datatype long in oracle8 database via SQL Plus or SQL worksheet there occurs the following error message: "field in data file exceeds the maximum length".
If I access to the database from a selve written program via odbc there is no problem when inserting the data by the same sql statement.
So what can I do?
Thanks in advance!
Juergen

What does your SQL statement look like?

Error while loading data into External table from the flat files

HI ,
We have a data load in our project which feeds the oracle external tables with the data from the Flat Files(.bcp files) in unix.
While loading the data, we are encountering the following error.
Error occured (Error Code : -29913 and Error Message : ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04063: un) while loading data into table_ext
Please let us know what needs to be done in this case to solve this problem.
Thanks,
Kartheek

Kartheek,
I used Google (mine still works).... please check those links:
http://oraclequirks.blogspot.com/2008/07/ora-29400-data-cartridge-error.html
http://jonathanlewis.wordpress.com/2011/02/15/ora-29913/
HTH,
Thierry

Error while inserting data in datagrid

Hi,
I am trying to insert data into a datagrid getting results
from a cfc using remoteobject. If I use everything inline then it
works fine.
I have a button when clicked give me the results. if I have
something like this:
<mx:Button label="get Query Remote Object"
click="myTest.getSystem()"/>
then it works fine.
but if I use a namespace like
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
xmlns:serv="services.*">
<serv:services id="services" />
and try to use
<mx:Button label="get Query Remote Object"
click="services.myTest.getSystem()"/>
then i get an error saying
Access of undefined property myTest in package services.
I have the remoteobject call within services.mxml which is
inside services folder. What do I need to change? It used to work
fine in 1.5.
Thanks

Are you using the Cairngorm framework or why are you using a
sevices.mxml??

Error while loading data into clob data type.

Hi,
I have created interface to load data from oracle table into oracle table.In target table we have attribute with clob data type. while loading data into clob field ODI gave below error. I use odi 10.1.3.6.0
java.lang.NumberFormatException: For input string: "4294967295"
     at java.lang.NumberFormatException.forInputString(Unknown Source)
     at java.lang.Integer.parseInt(Unknown Source)
     at java.lang.Integer.parseInt(Unknown Source)
Let me know if anyone come across and resolved this kind of issue.
Thanks much,
Nishit Gajjar

Mr. Gajjar,
You didnt mention what KMs you are using ?
have a read of
Re: Facing issues while using BLOB
and
Load BLOB column in Oracle to Image column in MS SQL Server
Try again.
And can you please mark the Correct/Helpful points to the answers too.
Edited by: actdi on Jan 10, 2012 10:45 AM

Getting error while loading Data into ASO cube by flat file.

Hi All,
i am getting this error Essbase error 1270040: Data load buffer[1] does not exist while loading data into ASO cube.
does anyone have solution.
Regards,
VM

Are you using ODI to load the data or maxl? If you are using an ODI interface, are you using a load rule also which version of essbase and ODI are you using
Cheers
John
http://john-goodwin.blogspot.com/

Error while load data into Essbase using ODI

Hi ,
I'm getting the following error while loading measures into Essbase using ODI, I used the same LOG nd Error file and file path for all my Dimensions , this worked well but not sure why this is not working for measures....need help.
File "<string>", line 79, in ?
com.hyperion.odi.common.ODIHAppException: c:/temp/Log1.log (No such file or directory)
Thanks
Venu

Are you definitely running it against an agent where that path exists.
Have you tried using a different location and filename, have you restarted the agent to make sure there is not a lock on the file.
Cheers
John
http://john-goodwin.blogspot.com/

Problem while inserting data for some datatypes in Oracle 10g

Hi
I was trying to insert data in database for all the data types defined in Oracle 10g.
I was successful in maximum cases.
I was not able to insert data for following datatypes:
1 Long varraw
2 string
3 varraw
4 varnum
5 charz
6 unsigned int
7 native double
8 native float
Please put some light on it.
Thanks,
Gyanendra

Hi Subin,
You can try couple of things.
If your data is less than 32767, you can pass it to stored procedure and change it to clob type like
PROCEDURE CLOBQUERY
Param IN CLOB,
and you can call Procedure
EXECUTE CLOBQUERY '[Param.1]'
If your data is around than 1000000(32767*32), you can break the data in length of 32767 and pass it to param 1 to 32 like
EXECUTE CLOBQUERY '[Param.1][Param.2][Param.3]..[Param.32]'
Finally you can try to update jdbc drive.
check the link Link: [JDBC Limitation|http://confluence.atlassian.com/display/JIRA/UsingOracle10gdriverstosolvethe4000character+limitation]

Error in native SQL while inserting data into CORP table

HI all,
I am getting an exception while inserting records using native SQL into CORP table.
PFB the code.
LOOP AT gi_hrp1001 INTO wa_hrp1001.
TRY.
        EXEC SQL.
          INSERT INTO misuser.Table_4
          VALUES (wa_hrp1001-otype , wa_hrp1001-objid ).
        ENDEXEC.
      CATCH cx_sy_native_sql_error.
        MESSAGE 'Connect - Error ' TYPE 'E'.
    ENDTRY.
ENDLOOP.
Please help.
Thanks & Regards
Nitesh

I see two issue with your Insert. 1) you need to specify the field names in the table, for example otype and objid. 2) You need to indicate in the VALUES that you're using host variables by using the prefix :.
I think the correct syntax is:
        EXEC SQL.
          INSERT INTO misuser.Table_4
         (otype, objid)
          VALUES (:wa_hrp1001-otype, :wa_hrp1001-objid)
        ENDEXEC.
Good luck.

Error while inserting data in SQL Server.

Hi',
I am using SOA 11.1.1.5
I am inserting data using DB adapter in MS SQL Server. Some times I get below error.
Error Message: {http://schemas.oracle.com/bpel/extension}bindingFault
Fault ID rrr/xxx!1.1*soa_313bd437-7bb9-41c6-a719-d1775b9afc4b/xx/4115908-BpInv0-BpSeq1.6-4
Fault Time Dec 24, 2012 8:02:09 AM
Non Recoverable System Fault :
<bpelFault><faultType>0</faultType><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'insert' failed due to: DBWriteInteractionSpec Execute Failed Exception. insert failed. Descriptor name: [InsertIntoStagingxx.Stagingxx]. Caused by java.sql.BatchUpdateException: String or binary data would be truncated.. Please see the logs for the full DBAdapter logging output prior to this exception. This exception is considered not retriable, likely due to a modelling mistake. To classify it as retriable instead add property nonRetriableErrorCodes with value "-8152" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary></part><part name="detail"><detail>String or binary data would be truncated.</detail></part><part name="code"><code>8152</code></part></bindingFault></bpelFault>
Please advice.
Thanks
Yatan

Hi Yatan,
This should be due to data issues. And the error message is due to data truncation issues.
Please check your payload that you are trying to insert into the SQL server table.
One or more fields might have a data that is exceeding its defined length with respect to the table definitions.
Problem with using SQL server is that while inserting, you will not be pointed towards which field or column is causing the error.
You have to take the pain of searching through the entire payload to find the problem causing ones.
Thanks,
Deepak.

Error while loading data into BW (BW as Target) using Data Services

Hello,
I'm trying to extract data from SQL Server 2012 and load into BW 7.3 using Data Services. Data Services shows that the job is finished successfully. But, when I go into BW, I'm seeing the below / attached error.
Error while accessing repository Violation of PRIMARY KEY constraint 'PK__AL_BW_RE_
Please let me know what this means and how to fix this. Not sure if I gave the sufficient information. Please let me know if you need any other information.
Thanks
Pradeep

Hi Pradeep,
Regarding your query please refer below SCN thread for the same issue:
SCN Thread:
FIM10 to BW 73- Violation of PRIMARY KEY -table AL_BW_REQUEST
Error in loading data from BOFC to BW using FIM 10.0
Thanks,
Daya

Error while inserting data into BFILE datatype

Similar Messages

Maybe you are looking for