Error while Installation database  ... in redhat linux 4.8

Hi,
i am trying to install oracle 10g in redhat linux 4.8
i am getting error at 62%
Error in invoking target 'ntcontb.o' of makefile   so please can any body tell me what is the issue I downloaded oracle from oracle website itself .
product prerequisite
Checking operating system requirements ...
Expected result: One of redhat-3,redhat-4,SuSE-9,asianux-1,asianux-2
Actual Result: redhat-4
Check complete. The overall result of this check is: Passed
=======================================================================
Checking operating system package requirements ...
Checking for make-3.79; found make-1:3.80-7.EL4. Passed
Checking for binutils-2.14; found binutils-2.15.92.0.2-25. Passed
Checking for gcc-3.2; found Not found. Failed <<<<
Checking for libaio-0.3.96; found libaio-0.3.105-2. Passed
Check complete. The overall result of this check is: Failed <<<<
Problem: Some packages required for the Oracle Database 10g to
function properly are missing (see above).
Recommendation: Install the required packages before continuing with
the installation.
=======================================================================
Checking kernel parameters
Checking for semmsl=250; found semmsl=250.      Passed
Checking for semmns=32000; found semmns=32000.  Passed
Checking for semopm=100; found semopm=100.      Passed
Checking for semmni=128; found semmni=128.      Passed
Checking for shmmax=536870912; found shmmChecking operating system
requirements ...
Expected result: One of redhat-3,redhat-4,SuSE-9,asianux-1,asianux-2
Actual Result: redhat-4
Check complete. The overall result of this check is: Passed
=======================================================================
Checking operating system package requirements ...
Checking for make-3.79; found make-1:3.80-7.EL4.        Passed
Checking for binutils-2.14; found binutils-2.15.92.0.2-25.      Passed
Checking for gcc-3.2; found Not found.  Failed <<<<
Checking for libaio-0.3.96; found libaio-0.3.105-2.     Passed
Check complete. The overall result of this check is: Failed <<<<
Problem: Some packages required for the Oracle Database 10g to
function properly are missing (see above).
Recommendation: Install the required packages before continuing with
the installation.
=======================================================================
Checking kernel parameters
Checking for semmsl=250; found semmsl=250.      Passed
Checking for semmns=32000; found semmns=32000.  Passed
Checking for semopm=100; found semopm=100.      Passed
Checking for semmni=128; found semmni=128.      Passed
Checking for shmmax=536870912; found shmmax=536870912.  Passed
Checking for shmmni=4096; found shmmni=4096.    Passed
Checking for shmall=2097152; found shmall=2097152.      Passed
Checking for file-max=65536; found file-max=202024.     Passed
Checking for VERSION=2.6.9; found VERSION=2.6.9-89.ELsmp.       Passed
Checking for ip_local_port_range=1024 - 65000; found
ip_local_port_range=32768 - 61000.      Failed <<<<
Checking for rmem_default=262144; found rmem_default=110592.    Failed <<<<
Checking for rmem_max=262144; found rmem_max=131071.    Failed <<<<
Checking for wmem_default=262144; found wmem_default=110592.    Failed <<<<
Checking for wmem_max=262144; found wmem_max=131071.    Failed <<<<
Check complete. The overall result of this check is: Failed <<<<
Problem: The kernel parameters do not meet the minimum requirements (see above).
Recommendation: Perform operating system specific instructions to
update the kernel parameters.
=======================================================================
Checking Recommended glibc version
Expected result: ATLEAST=2.3.2-95.27
Actual Result: 2.3.4-2.43
Check complete. The overall result of this check is: Passed
=======================================================================
Checking physical memory requirements ...
Expected result: 922MB
Actual Result: 1988MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking available swap space requirements ...
Expected result: 2982MB
Actual Result: 1983MB
Check complete. The overall result of this check is: Failed <<<<
Problem: The system does not have the required swap space.
Recommendation: Make more swap space available to perform the install.
=======================================================================
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with
DHCP-assigned public IP addresses.  However, the primary network
interface on the system should be configured with a static IP address
in order for the Oracle Software to function properly.  See the
Installation Guide for more details on installing the software on
systems configured with DHCP.
=======================================================================
Validating ORACLE_BASE location (if set) ...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Oracle Home path for spaces...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for proper system clean-up....
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for Oracle Home incompatibilities ....
Actual Result: NEW_HOME
Check complete. The overall result of this check is: Passed
=======================================================================ax=536870912.    Passed
Checking for shmmni=4096; found shmmni=4096.    Passed
Checking for shmall=2097152; found shmall=2097152.      Passed
Checking for file-max=65536; found file-max=202024.     Passed
Checking for VERSION=2.6.9; found VERSION=2.6.9-89.ELsmp.       Passed
Checking for ip_local_port_range=1024 - 65000; found
ip_local_port_range=32768 - 61000.      Failed <<<<
Checking for rmem_default=262144; found rmem_default=110592.    Failed <<<<
Checking for rmem_max=262144; found rmem_max=131071.    Failed <<<<
Checking for wmem_default=262144; found wmem_default=110592.    Failed <<<<
Checking for wmem_max=262144; found wmem_max=131071.    Failed <<<<
Check complete. The overall result of this check is: Failed <<<<
Problem: The kernel parameters do not meet the minimum requirements (see above).
Recommendation: Perform operating system specific instructions to
update the kernel parameters.
=======================================================================
Checking Recommended glibc version
Expected result: ATLEAST=2.3.2-95.27
Actual Result: 2.3.4-2.43
Check complete. The overall result of this check is: Passed
=======================================================================
Checking physical memory requirements ...
Expected result: 922MB
Actual Result: 1988MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking available swap space requirements ...
Expected result: 2982MB
Actual Result: 1983MB
Check complete. The overall result of this check is: Failed <<<<
Problem: The system does not have the required swap space.
Recommendation: Make more swap space available to perform the install.
=======================================================================
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with
DHCP-assigned public IP addresses.  However, the primary network
interface on the system should be configured with a static IP address
in order for the Oracle Software to function properly.  See the
Installation Guide for more details on installing the software on
systems configured with DHCP.
=======================================================================
Validating ORACLE_BASE location (if set) ...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Oracle Home path for spaces...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for proper system clean-up....
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for Oracle Home incompatibilities ....
Actual Result: NEW_HOME
Check complete. The overall result of this check is: Passed---chetan
Edited by: CHETAN YADAV on Oct 6, 2010 3:27 PM
Edited by: CHETAN YADAV on Oct 6, 2010 3:28 PM

>
so please can any body tell me what is the issue I downloaded oracle from oracle website itself .Yes. The issue is your assumption.
Why do you assume that the o/s is automatically configured with the required s/w components for running Oracle 10g? Should the o/s have a clairvoyant module that "knows" it needs to prep itself when it is installed for supporting Oracle 10g? And not as a Weblogic server? Or mySQL? Or Postgress? Or JBoss? Or Oracle 11g?
Be glad that Oracle s/w actually tells you exactly what it needs from the o/s that is missing or needs correction. As this is exactly how a robust s/w stack should behave.

Similar Messages

  • Error while installing OWB on Redhat Linux

    Hi,
    I installed Oracle database on Linux , while installing oracle i got error
    error while writing to directory /tmp/OraInstall<date> please ensure that this directory is writable and has atleast 60mb of disk space. Installation can not continue
    then i did some thing and it went thru, now i am trying to install the OWB again i am getting the same error and i was browsing net past 2 days for a solution but i din't get one
    while installing oracle i have not made any notes, that was my mistake
    Please suggest me the possible solution or the Document which can guide me
    Thanks in Advance
    Suresh

    Hi,
    the problem is the logfile for the installation. Every oracle installtion writes a log file with this name in a predefined directory. Make the directory /tmp writable for oracle and extend the disk quota at least 60 MB.
    Regards
    Detlef

  • Getting error while installation of SAP on Linux 64 bit

    Dear All,
    me using redhat version 5
    database 10g
    Proceded installtion through VNC. while installation of oracle 10g getting some eror at 83% details mention below.
    Error in invoking target 'ntcontab.o' of makefile
    INFO: End output from spawned process.
    INFO: -
    INFO: Exception thrown from action: make
    Exception Name: MakefileException
    Exception String: Error in invoking target 'ntcontab.o' of makefile '/oracle/SOL/102_64/network/lib/ins_net_client.mk'. See '/oracle/oraInventory/logs/installActions2009-06-18_09-13-18AM.log' for details.
    Exception Severity: 1
    INFO: Exception handling set to prompt user with options to  Retry  Ignore
    User Choice: Retry
    INFO: The output of this make operation is also available at: ''/oracle/SOL/102_64/install/make.log'
    INFO:
    INFO: Start output from spawned process:
    INFO: -
    INFO:
    INFO: rm -f ntcontab.*
    INFO: (if [ "compile" = "compile" ] ; then \
              '/oracle/SOL/102_64/bin/gennttab > ntcontab.c
              gcc  -c ntcontab.c
              rm -f /'/oracle/SOL/102_64/lib/ntcontab.o
              mv ntcontab.o '/oracle/SOL/102_64/lib/
              /usr/bin/ar rv'/oracle/SOL/102_64/lib/libn11.a '/oracle/SOL/102_64/lib/ntcontab.o ; fi)
    INFO: /bin/sh:  line 2: gcc:  command not found
    INFO: mv: cannot stat `ntcontab.o'
    INFO: : No such file or directory
    INFO: /usr/bin/ar: '/oracle/SOL/102_64/lib/ntcontab.o: No such file or directory
    INFO: make: *** [ntcontab.o] Error 1
    INFO: End output from spawned process.
    INFO: -
    INFO: Exception thrown from action: make
    Exception Name: MakefileException
    Exception String: Error in invoking target 'ntcontab.o' of makefile ''/oracle/SOL/102_64/network/lib/ins_net_client.mk'. See '/oracle/oraInventory/logs/installActions2009-06-18_09-13-18AM.log' for details.
    Exception Severity: 1
    Request you to revert as soon as possible.
    ThankYou in Advance

    Dear,
    Thanks for your replay.
    command to check gcc version :        
    RPM -qa | grep gcc
    Output of this command.
    compact-gcc-34-g77-3.4.6-4
    libgcc-4.1.2-46.el5
    comact-gcc-34-c++-3.4.6-4
    libgcc-4.1.2-46.el5
    compact-libgcc-296-2.96-138
    compact-gcc-34-3.4.6-4
    pleae suggest if any updated version of gcc i have to installed or is this OK.
    I have ignore that error and click on continue after that my installation is finished sucessfull
    i have encounter one more problem
    ogon as root
    /oracle/oraInventory/orainstRoot.sh
    /oracle/<SID>/102_64/root.sh
    [root@ram 102_64]# ./root.sh
    ./root.sh: line 12: 01777: command not found
    ./root.sh: line 13: root: command not found
    ./root.sh: line 20: 01777: command not found
    ./root.sh: line 21: root: command not found
    ./root.sh: line 63: /bin/fmputl: No such file or directory
    ./root.sh: line 64: /bin/fmputlhp: No such file or directory
    ./root.sh: line 65: 550: command not found
    ./root.sh: line 66: 4555: command not found
    ln: creating symbolic link `/rdbms/filemap' to `/opt/ORCLfmap/prot1_64': No such file or directory
    .then getting error on create database at 13 phase
    checked ora_sql_result.log
    SAPINST:  Emd of output of SQL executing program /oracle/SOL/102_64/bin/sqlplus.
    SAPINST  found errors.
    SAPINST  the current process environment may be foun din SAPINST_ORA_ENVIRONMENT.log .
    SAPINST Oracle stop logging
    REquest you to please provide solution Asap.
    Thanks
    In  Advacbe
    Anant singh

  • Error while installing database in oracle linux 4 via VMware Server Console

    Hi to all
    While Installing Oracle database in linux OS via Virtual machine, i got the below error :-
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-07-30_12-34-31PM. Please wait ...
    [oracle@localhost database]$ Xlib: connection to ":0.0" refused by server
    Xlib: No protocol specified
    Exception in thread "main" java.lang.Internal Error: Can't
    connect to X11window server using ':0.0' as the value of the
    DISPLAY variable.
         at sun.awt.X11GraphicsEnvironment.initDisplay(Native
    Method)
         at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown
    Source)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Unknown Source)
         at
    java.awt.GraphicsEnvironment.getLovalGraphicsEnvironment
    (Unknown Source)
         at java.awt.Window.init(Unknown Source)
         at java.awt.Window.<init>(Unknown Source)
         at java.awt.Frame.<init>(Unknown Sourece)
         at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown
    Source)
         at oracle.sysman.oio.oioc.OicocOneClickInstaller.<init>
    (OiocOneClickInstaller.java:378)
         at oracle.sysman.oio.oioc.OiocOneClickInstaller.main
    (OiocOneClickInstaller.java:2091)
    Please make a clear message to how i need to rectify, as of am a new user for the VMware server console.
    Let me know what are all the steps i need to follow for rectifying the above error.
    your guidance will be much appreciated.
    Regards
    Khan

    Hi Helious,
    After this problem cleared i installed the oracle database; while installing i found another error
    Output generated from configuration assistant "Oracle Net Configuration Assistant".
    Command = /home/oracle/oracle/product/10.2.0/db_1/jdk/jre//bin/java -Duser/
    dir=/home/oracle/oracle/product/10.2.0/db_1/network/jlib -classpath
    /home/oracle/oracle/product/10.2.0/db_1/jdk/jre//lib/i18n.jar:
    /home/oracle/oracle/product/10.2.0/db_1/jdk/jre//lib/rt.jar:/home/oracle/oracle/product.10.
    2.0/db_1/jlib/ewt3.jar:/home/oracle/oracle/product/10.2.0/db_1/jlib/ewtcompat-3_3_15.jar:
    /home/oracle/oracle/product/10.2.0/db_1/jlib/netcfg.jar:/home/oracle/oracle/product/10.2.0
    and etc.
    what i need to do for these errors, and i shutdown my system.
    And how i need to continue after rectifying from that point.
    Please let me know.. Your help will be highly appreciated
    Regards
    Khan

  • Error while installing Database 10g on Linux Enterprise 5

    Hi All,
    When I tried to install Database 10g this error apears
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-02-05_12-55-24PM. Please wait ...bash-3.2$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-02-05_12-55-24PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
    at java.lang.ClassLoader$NativeLibrary.load(Native Method)
    at java.lang.ClassLoader.loadLibrary0(Unknown Source)
    at java.lang.ClassLoader.loadLibrary(Unknown Source)
    at java.lang.Runtime.loadLibrary0(Unknown Source)
    at java.lang.System.loadLibrary(Unknown Source)
    at sun.security.action.LoadLibraryAction.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
    at sun.awt.DebugHelper.<clinit>(Unknown Source)
    at java.awt.Component.<clinit>(Unknown Source)
    --------------------------------------------------------------

    This has been documented on various places.
    Install the libXp package, that is the package which contains libXp.so.6, which is missing (see your error message)
    Is this x86 or x86_64?
    (in both cases you need to install the x86 version (.i386.rpm))

  • Dtabase version error while installation

    Hi,
    I am installing BAM in 2003 server with oracle Database XE which have 10.2.0.1 version.
    But its giving me the below error while installation:
    Database version should be 9.2.0.7 or higher , 10.1.0.5 or highers, 10.2.0.2 or higher .
    Please suggest me on the same.
    Regards,
    Ana

    Hi,
    Thanks for the suggestion, now my issue has been resolved.
    I did the installation of DataBase and BAM again after deleting its all previous entries from Oracle home.
    It accept that version only and working fine.
    Regards,
    Ana

  • Error while installing oracle R2 on linux

    hi guy's,
    first of all plz forgive me if i am placing this at wrong place.
    actually i am trying to install oracle database 10g R2 on RHEL5 x86 platform.i complated all prerequisite for installing oracle on linux specified at
    http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnRHEL5.php#Installation
    but i am getting following errors while installation.
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-12-12_08-39-28PM. Please wait ...[oracle@SW044 /]$ Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using 'sw044:0.0' as the value of the DISPLAY variable.
    at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
    at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown Source)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Unknown Source)
    at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown Source)
    at java.awt.Window.init(Unknown Source)
    at java.awt.Window.<init>(Unknown Source)
    at java.awt.Frame.<init>(Unknown Source)
    at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
    at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
    at oracle.sysman.oio.oioc.OiocOneClickInstaller.<init>(OiocOneClickInstaller.java:378)
    at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2091)
    what this error represents ?? what steps should i follow?
    plz help
    thanks and regards
    VD

    actually sir i am doing this as oracle user.
    and i have set DISPLAY=<machine-name>:0.0; export DISPLAY environment corrctly,and i ma using X emulation.
    now what is the problem?
    thanks and regards
    VD

  • Stuck while installation of oracle in linux

    Hi guru's
    i am stuck with a problem while installation of oracle in linux please help me
    i am getting following error
      [root@localhost etc]# groupadd oinstall
    groupadd: group oinstall exists
    [root@localhost etc]# useradd -m -g oinstall-G dba-d/home/oracle-s/bin/bash-c"oracle software Owner" oracle
    useradd: unknown group oinstall-G
    [root@localhost etc]# Thanks in advance

    Brian while keeping that space getting this error actually
    [root@localhost etc]# useradd -m -g oinstall -G dba -d /home/oracle -s /bin/bash-c “Oracle Software Owner” oracle
    Usage: useradd [options] LOGIN
    Options:
      -b, --base-dir BASE_DIR       base directory for the new user account
                                    home directory
      -c, --comment COMMENT         set the GECOS field for the new user account
      -d, --home-dir HOME_DIR       home directory for the new user account
      -D, --defaults                print or save modified default useradd
                                    configuration
      -e, --expiredate EXPIRE_DATE  set account expiration date to EXPIRE_DATE
      -f, --inactive INACTIVE       set password inactive after expiration
                                    to INACTIVE
      -g, --gid GROUP               force use GROUP for the new user account
      -G, --groups GROUPS           list of supplementary groups for the new
                                    user account
      -h, --help                    display this help message and exit
      -k, --skel SKEL_DIR           specify an alternative skel directory
      -K, --key KEY=VALUE           overrides /etc/login.defs defaults
      -m, --create-home             create home directory for the new user
                                    account
      -l,                       do not add user to lastlog database file
      -M,                       do not create user's home directory(overrides /etc/login.defs)
      -r,                       create system account
      -o, --non-unique              allow create user with duplicate
                                    (non-unique) UID
      -p, --password PASSWORD       use encrypted password for the new user
                                    account
      -s, --shell SHELL             the login shell for the new user account
      -u, --uid UID                 force use the UID for the new user account
      -Z, --selinux-user SEUSER     use a specific SEUSER for the SELinux user mapping

  • Error while creating database in classic appln

    Hi All,
    I am getting this error while creating database in classic application.
    com.hyperion.planning.olap.EssbaseException: Failed to create database, error code [%s] (1013221).
    Can anyone please let me know why I am getting it?
    Thanks in advance

    Can you check for a more specific error code in the Application log? There can be various reasons for this:
    1. For data storage and binary installation, Essbase supports the use of any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS). A disk array mounted using NFS or CIFS is not supported.Use any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS).
    2. Error occurs when deploy Planning application with double byte enabled. When the plan name is changed to English, deploy will be successful. This issue can be fixed by setting Correct Essbase ESSLANG system value.
    3. The Essbase User that creates the application and DB folders has default ACL rw-rw-rw which does not allow the essbase app to create files inside the folder.
    HTH-
    Jasmine.

  • ERROR WHILE INSTALLING DATABASE INSTANCE

    Hi All,
        I am getting an error while installing database instance in 4.7EE with Oracle 8i.The error is
    running sapstart.exe name=AS9 nr=00 SAPDIAHOST=astrum -wait
    SAPSTART finished successfully on astrum_AS9_00, but Dispatcher is not connected to MessageServer.
    sapparam(1c): No Profile used.
    PLEASE HELP ME....

    hi pavan,
    i believe that oracle 8i are no longer supported by SAP.
    By default, SAP R/3 4.7 EE should come with Oracle 9i.
    Check your installer again.
    ardhian
    http://sapbasis.wordpress.com

  • How to fix the VMWARE ERROR DOWNLOADING KICKSTART FILE ON Redhat linux 6.0

    Hi Team,
           While deploying RHEL6.0 i am getting error "VMWARE ERROR DOWNLOADING KICKSTART FILE ON Redhat linux 6.0" Please let me know how to fix this issues.
    Thanks
    vmware tech

    theoretically all I need to change would be
    changed it to var handd = new hand();
    change stage.addChild(hand);    to     stage.addChild(handd);
    and the part im unsure on is
       else
                        trace(fl_SecondsCounted + " sec");
                        hand.rotation = hand.rotation + 6;
                        fl_SecondsCounted--;
    do I leave that part or change it to handd.rotation = handd.rotation + 6

  • Error while Assigning database level role (db_datareader) to SQL login (Domain Account)

    Team,
    I got an error while creating a User for Domain Account. Below is the screen shot of the error (error : 15401)
    Database instance is on SQL 2000 SP3. ( I know it is out of support, But the customer is relutanct to upgrade)
    On Google search, i found below article which is best matching for this error
    http://support.microsoft.com/kb/324321
    I have follows each step of troubleshooting. But still the issue persists.
    Step 1. The login does not exist == The login is very much exist in the domain as i am able to add the same domain id to other database instances
    Step 2. Duplicate security identifiers == i have used this query to find duplicate SID
    /*  SELECT name FROM syslogins WHERE sid = SUSER_SID ('YourDomain\YourLogin') */
    But there was only one row returned with create date of today's.
    Error while Assigning database level role (db_datareader) to SQL login (Domain Account) 
    Step 3. Authentication failure == Domain is available. User is able to login on other servers via RDP connection.
    Step 4. Case sensitivity == Database collation is set to Case insensitivity. (CI)
    Other two 5. Local Accounts & 6. Name resolution == is not applicable to me.
    I tried other ways also.
    A. Creating login and providing permission in one go only = User account is not created
    B. Instead of GUI, use query to create login and provide required permission = Same error.
    Does anybody has faced any such situation
    Chetan

    See the below output
    srvid
    sid
    xstatus
    xdate1
    xdate2
    name
    password
    dbid
    language
    isrpcinmap
    ishqoutmap
    selfoutmap
    NULL
    0x010500000000000515000000A1F66E1BFC1DC75D26E72530A2B80400
    14
    20:25.9
    57:33.4
    UKBAA\LHRAPPMuttavarapuS
    NULL
    1
    us_english
    0
    0
    0
    Chetan

  • Error while creating database manually

    hi guru's i am getting error while creating database manually
    my sql is SQL>create database lily
      logfile   group 1 ('C:\oracle\product\10.2.0\oradata\lily\redo1.log') size 10M,
                group 2 ('C:\oracle\product\10.2.0\oradata\lily\redo2.log') size 10M,
                group 3 ('C:\oracle\product\10.2.0\oradata\lily\redo3.log') size 10M
      character set          WE8ISO8859P1
      national character set utf8
      datafile 'C:\oracle\product\10.2.0\oradata\lily\system.dbf'
                size 50M
                autoextend on
                next 10M maxsize unlimited
                extent management local
      sysaux datafile 'C:\oracle\product\10.2.0\oradata\lily\sysaux.dbf'
                size 10M
                autoextend on
                next 10M
                maxsize unlimited
      undo tablespace undo
                datafile 'C:\oracle\product\10.2.0\oradata\lily\undo.dbf'
                size 10M
      default temporary tablespace temp
                tempfile 'C:\oracle\product\10.2.0\oradata\lily\temp.dbf'
                size 10M;and i am getting following error
    create database lily
    ERROR at line 1:
    ORA-01501: CREATE DATABASE failed
    ORA-00200: control file could not be created
    ORA-00202: control file: 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\LILY\CONTROL01.CTL'
    ORA-27038: created file already exists
    OSD-04010: <create> option specified, file already exists
    code}
    Edited by: CHETAN YADAV on Jul 19, 2011 6:55 PM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    create database lily
      logfile   group 1 ('C:\oracle\product\10.2.0\oradata\lily\redo1.log') size 10M,
              group 2 ('C:\oracle\product\10.2.0\oradata\lily\redo2.log') size 10M,
                group 3 ('C:\oracle\product\10.2.0\oradata\lily\redo3.log') size 10M
      datafile 'C:\oracle\product\10.2.0\oradata\lily\system.dbf'  size 150M
    sysaux datafile 'C:\oracle\product\10.2.0\oradata\lily\sysaux.dbf' 150 M
      undo tablespace undo  datafile 'C:\oracle\product\10.2.0\oradata\lily\undo.dbf'  size 10M
    default temporary tablespace temp tempfile 'C:\oracle\product\10.2.0\oradata\lily\temp.dbf' size 10M;
    remove the SQL> from the a.sql script also change the system datafile size to minimum of 100mb size
    ALSO check/change the undotablespace name with your init parameter file it should match as it is in the init parameter file
    Edited by: rajeysh on Jul 19, 2011 6:59 PM

  • Error while installation of Outlook Integration Add On

    Hi Experts,
    Problem encountered upon installation of outlook add-on
    The message box shows "The Procedure point ??OCBFDbDef@@QAE@....... could not be located in dynamic link library BFFramework.dll".
    I'm watching this thread . I cannot open the link for the proposed solution to my problem.
    [Error while installation of Outlook Integration Add On]
    Please provide updated link
    Regards,
    Sandra
    Edited by: Sandra Callanta on Sep 15, 2009 10:55 AM
    Edited by: Sandra Callanta on Sep 15, 2009 10:56 AM

    Hi Sandra,
    You may check SAP Note Number: 953357 instead. The title for the note is: Troubleshooting Add-ons in Business One.
    Thanks,
    Gordon

  • Error while installation of Addon

    Friends,
    I get this error while installation of addon.
    An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
    My code works fine when executed directly from Visual Studio. But when i build the addon and try to install it, i get this error.
    The server is 64 Bit. is it making any difference?
    plz help.
    Laks.

    look at sdk forum, there is a lot of explanation for this.
    From visual studio you are using diferent connection string than in addon and for addon you must create separately instal file (not only compiled as exe from vs)
    In sdk samples is example for addon creating, look at that.
    Petr

Maybe you are looking for

  • Lost all itunes music on my iPhone 5 with itunes 11

    My iPhone 5 won't sync with iTunes 11 through iCloud.  I have tried to sync to the cloud about 25 times.  I have reset my iPhone, I have deleted my account and then logged on again, I have done everything I can think of to get it to sync but the iClo

  • File to Idoc - File not picked up

    Hi experts,                In the file to idoc scenario when i post a file in the file server it is not picked up by the file adapter. But in the communication channel monotoring it reports <b>'Process finished sucessfully'</b>. Help me out in this i

  • Create an idex of terms...

    Dear All, I'm using Cap4 wanting to publish as swf files. I want to generate a list of terms (index?) that users could access during a module. I want this list of terms to be linked to pics/demos/animations. I realize I could just type the text of al

  • I have prepared a personal budget and sorted the planned expenses by month, but the months are out of order. How do I correct?

    I have prepared a personal budget and sorted the planned expenses by month, but they are out of order. How do I correct?

  • Formula in LabVIEW

    Hi, We have purchased LabVIEW 8.0 and currently working on a project based on LabVIEW. I have to write out the result from a formula calculation to a parallel port. The result of the formula is a 11 digit decimal number. I need to display the result