Error While Installation of SOA SUITE 11g
Hi
I am installing SOA SUITE 11g on Oracle Linux 4.
I have already installed Oracle database 11g
I have installed Weblogic server 10.3.x
I have checked oracle database , i am able to run it successfully.
I have checked weblogic server too, its too running successfully.
I have logged into server as *"oracle" user* and trying to run runInstaller from command prompt
the trace for error getting generated is below. plz let me know where i am making mistake.
I am new to SOA SUITE n related technologies..
++[oracle@localhost ~]$ cd SOA_SUITE/Disk1++
++[oracle@localhost Disk1]$ ls++
++doc install runInstaller setup.exe stage++
++[oracle@localhost Disk1]$ ./runInstaller++
++Starting Oracle Universal Installer...++
++Checking if CPU speed is above 300 MHz. Actual 1992 MHz Passed++
++Checking Temp space: must be greater than 150 MB. Actual 233511 MB Passed++
++Checking swap space: must be greater than 500 MB. Actual 5023 MB Passed++
++Checking monitor: must be configured to display at least 256 colors++
++>>> Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<++
++Some requirement checks failed. You must fulfill these requirements before++
++continuing with the installation,++
++Continue? (y/n) [n] y++
++>>> Ignoring required pre-requisite failures. Continuing...++
++Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-02-23_05-49-23PM. Please wait ...++
++Please specify JRE/JDK location ( Ex. /home/jre ), <location>/bin/java should exist :++
++Please specify a valid JRE/JDK location :/root/Oracle/Middleware/jdk160_14_R27.6.5-32++
++Please specify a valid JRE/JDK location :++
I am trying to give JRE/JDK location which i got when i was installing weblogic server but its not accepting that and i am getting
"Please specify a valid JRE/JDK location : " message again.
Please let me know how i can i get out of this error.
Thanks
vishnu kumar
Hi,
check for some spaces or character which might be going while you specify the JRE locations, alternatively you can call runInstaller with
-jreLoc ,i.e;have the path in the cmd.
./runInstaller -jreLoc /root/Oracle/Middleware/jdk160_14_R27.6.5-32
which should work.
regards,
Jitendra
Similar Messages
-
Error using OSR10g with SOA Suite 11g
Hi,
I'm trying to configure a web service adapter in Jdev 11.1.1.2 in order to use the OSR (10g) to dinamically resolve the WSDL location and SOAP endpoint, but I always get an error like this:
Exception: WSDLException: faultCode=PARSER_ERROR: Failed to read wsdl file at: "orauddi:/uddi:8955c1d0-0b55-11e1-b90e-7b4aa540b908", caused by: oracle.fabric.common.uddiurl.resolver.exception.SRKeyNotFoundException:
<dispositionReport xmlns="urn:uddi-org:api_v3">
<result errno="10210">
<errInfo errCode="E_invalidKeyPassed">Cannot find BusinessService with key orauddi:/uddi:8955c1d0-0b55-11e1-b90e-7b4aa540b908 !</errInfo>
</result>
</dispositionReport>The service is correctly published in registry, even its reachable from the UDDI Registry Resource Palette in JDEV.
The same service published in a OSR 11g is invoked correctly, but I can't solve the proble for the OSR 10g.
I found some documentation about migrating and it says that the SOA Suite 10g uses UDDI standar but the 11g Suite uses orauddi.... so, not standard??, is there a way to integrate SOA Suite 11g with OSR 10g??Hi,
check for some spaces or character which might be going while you specify the JRE locations, alternatively you can call runInstaller with
-jreLoc ,i.e;have the path in the cmd.
./runInstaller -jreLoc /root/Oracle/Middleware/jdk160_14_R27.6.5-32
which should work.
regards,
Jitendra -
Installation of SOA Suite 11g for development purpose
Hello All,
I wanted to install SOA Suite 11g for development purpose on my laptop (OS Windows XP).
As per installtion prerequisite process in the download page of oracle.
I found the following pre requisite - installation of Oracle DB 11g EE(although i am having Oracle DB 10g R2 10.0.2.0 - now the problem is i am not able to run RCU in this data base, so i installed 11g)
Jdev 11g Download
Web Logic Server
RCU Utlilty run
then SOA Suite installation.
My doubt is , is there any SOA development installation available because 11g DB EE takes lot of space in my system.
if available please provide the link.
Thanks & regards
AboothahirHello Anuj,
Thanks for your reply,
I am running RCU utility on the XE Database.
I am getting the following error:
RCU-6083:Failed - Check prerequisites requirement for selected component:OIM
Please refer to RCU log at C:\rcuHome\rcu\log\logdir.2011-02-07_21-34\rcu.log for details.
Error: JVM is not installed on the Database.
RCU-6092:Component Selection validation failed. Please refer to log at C:\rcuHome\rcu\log\logdir.2011-02-07_21-34\rcu.log for details.
Please provide a solution for this.
Thanks & Regards
Aboothahir M -
Getting OPMN error while installing Oracle SOA Suite
I am getting errror while installing Oracle SOA suit.
Configuration assistant "Oracle Process Management and Notification Configuration Assistant" failed
Please helpI tried to start all at opmn/bin and got following message
Timed out waiting for OPMN to initialize. OPMN may be down
taking a long time to initialize. Will not attempt to start
processes because OPMN is unreachable. If OPMN is initializ
retrying the command may prove successful. If OPMN is down,
correct the underlying problem before retrying the command.
Please help -
Error while starting Oracle SOA Suite 10g
Hi,
I have installed Oracle SOA suite in my system.
While i start the server , it shows the following error in log file.
Configuration information
Running in D:\product\10.1.3.1\OracleAS_1
Operation mode:Startup, App Server, No Enterprise Manager, Single Instance
Oracle home:D:\product\10.1.3.1\OracleAS_1
Oracle home name:Unnamed
Instance name:esbsoa.localhost
Instance type:allProducts
Version:10.1.3.1.0
Uses infrastructure:false
Not an infrastructure instance, no infrastructure information available
Components:[j2ee, orabpel, oraesb, owsm, Wsil]
2011-03-23 10:09:24.757--Begin log output for Mid-tier services (esbsoa.localhost)
2011-03-23 10:09:24.757--Processing Step: starting OPMN
2011-03-23 10:09:45.835--End log output for Mid-tier services (esbsoa.localhost)
OPMN has thrown an unknown exception
oracle.appserver.startupconsole.model.ConsoleException: OPMN has thrown an unknown exception
at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:108)
at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.ias.opmn.optic.OpticBadRequestException: Error starting opmn server: 2
at oracle.ias.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:147)
at oracle.ias.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:77)
at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:90)
... 6 more
Exception caused by
Error starting opmn server: 2
oracle.ias.opmn.optic.OpticBadRequestException: Error starting opmn server: 2
at oracle.ias.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:147)
at oracle.ias.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:77)
at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:90)
at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Also when i got the following error in command prompt
D:\product\10.1.3.1\OracleAS_1\opmn\bin>opmnctl stopall
Could not create process by
F:\product\10.1.3.1\OracleAS_1\opmn\bin\opmn.exe -a -q ping
with error The system cannot find the path specified.
(GetLastError()=3
I have renamed the F: directory to D: , is it the problem ?
Edited by: Lalit on Mar 22, 2011 10:44 PMGot resolved
-
Error while starting the SOA suite
Hi,
Im facing error while starting SOA suite, which I was doing earlier without error.
Below is the error log.
An unknown OPMN error has occured
oracle.appserver.startupconsole.model.ConsoleException: An unknown OPMN error has occured
at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:140)
at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
... 6 more
Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
... 6 more
Exception caused by
There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
... 6 more
<?xml version='1.0' encoding='WINDOWS-1252'?>
<response>
<msg code="-82" text="Remote request with weak authentication.">
</msg>
<opmn id="DWH-34316-K2:6200" http-status="204" http-response="0 of 1 processes started.">
<ias-instance id="soa.DWH-34316-K2.wipro.com">
<ias-component id="default_group">
<process-type id="home">
<process-set id="default_group">
<process id="943261457" pid="836" status="Stop" index="1" log="F:\OracleBpel\CoE\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~home~default_group~1.log" operation="request" result="failure">
<msg code="-21" text="failed to start a managed process after the maximum retry limit">
</msg>
</process>
</process-set>
</process-type>
</ias-component>
</ias-instance>
</opmn>
</response>Hi,
Below is the errror stated in opmn.log
Thanks in advance
07/10/18 10:04:15 [ons-internal] ONS server initiated
07/10/18 10:04:15 [pm-internal] PM state directory exists: F:\OracleBpel\CoE\product\10.1.3.1\OracleAS_1\opmn\logs\states
07/10/18 10:04:15 [pm-internal] OPMN server ready. Request handling enabled.
07/10/18 10:04:21 [pm-requests] Request 5 Started. Command: /start
07/10/18 10:04:21 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (943261439:0)
07/10/18 10:04:21 [pm-process] Starting Process: default_group~home~default_group~1 (943261440:0)
07/10/18 10:04:21 [pm-process] Starting Process: default_group~oc4j_soa~default_group~1 (943261441:0)
07/10/18 10:04:24 [pm-process] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (943261439:8080)
07/10/18 10:04:35 [pm-process] Process Alive: default_group~home~default_group~1 (943261440:3828)
07/10/18 10:05:31 [pm-process] Process Alive: default_group~oc4j_soa~default_group~1 (943261441:5944)
07/10/18 10:05:31 [pm-requests] Request 5 Completed. Command: /start
07/10/18 10:53:45 [pm-requests] Request 58 Started. Command: /stop
07/10/18 10:53:45 [pm-process] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (943261439:8080)
07/10/18 10:53:45 [pm-process] Stopping Process: default_group~home~default_group~1 (943261440:3828)
07/10/18 10:53:45 [pm-process] Stopping Process: default_group~oc4j_soa~default_group~1 (943261441:5944)
07/10/18 10:53:49 [pm-process] Process Stopped: HTTP_Server~HTTP_Server~HTTP_Server~1 (943261439:8080)
07/10/18 10:53:53 [pm-process] Process Stopped: default_group~home~default_group~1 (943261440:3828)
07/10/18 10:54:03 [pm-requests] Request 58 Completed. Command: /stop
07/10/18 10:54:03 [pm-process] Process Stopped: default_group~oc4j_soa~default_group~1 (943261441:5944)
07/10/18 10:54:04 [pm-requests] Request 6c Started. Command: /stop
07/10/18 10:54:04 [pm-requests] Request 6c Completed. Command: /stop
07/10/18 10:54:04 [pm-internal] OPMN server stopped. Request handling disabled.
07/10/18 10:54:04 [pm-requests] Request 6d Started. Command: /shutdown
07/10/18 10:54:04 [pm-requests] Request 6d Completed. Command: /shutdown
07/10/18 10:54:04 [pm-scheduler] Pm/Ons confirm notification timeout
07/10/18 10:54:05 [internal] Logging disabled
07/10/18 10:54:16 [ons-internal] ONS server initiated
07/10/18 10:54:16 [pm-internal] PM state directory exists: F:\OracleBpel\CoE\product\10.1.3.1\OracleAS_1\opmn\logs\states
07/10/18 10:54:16 [pm-internal] OPMN server ready. Request handling enabled.
07/10/18 10:54:22 [pm-requests] Request 5 Started. Command: /start
07/10/18 10:54:22 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (943261442:0)
07/10/18 10:54:22 [pm-process] Starting Process: default_group~home~default_group~1 (943261443:0)
07/10/18 10:54:22 [pm-process] Starting Process: default_group~oc4j_soa~default_group~1 (943261444:0)
07/10/18 10:54:25 [pm-process] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (943261442:7428)
07/10/18 10:54:33 [libopmnoc4j] Host and Port information for port type default-web-site not sent by the OC4J process
07/10/18 10:54:33 [libopmnoc4j] WARNING: OC4J did not send the protocol value for port id: default-web-site
07/10/18 10:54:33 [libopmnoc4j] Port information in the ONS notification is incorrect for proc: 943261443. Some of the reasons for the failure are:
1. ajp, rmi and jms ports could not be bound by the process.
2. If a port value for a certain port ID is handed by OPMN to the OC4J process and this value is not returned back in the ONS notifications. For example, this can happen for certain bad JGroups related configurations.
07/10/18 10:54:33 [libopmnoc4j] Process Start Error: default_group~home~default_group~1 (943261443:300)
07/10/18 10:54:33 [pm-process] Stopping Process: default_group~home~default_group~1 (943261443:300)
07/10/18 10:54:33 [libopmnoc4j] Process Stop Error: default_group~home~default_group~1 (943261443:300)
07/10/18 10:54:33 [libopmnoc4j] Failed to construct stop command for proc: 943261443
07/10/18 10:54:33 [libopmnoc4j] Forcefully Terminating Process: default_group~home~default_group~1 (943261443:300)
07/10/18 10:54:35 [pm-process] Starting Process: default_group~home~default_group~1 (943261443:0)
07/10/18 10:54:45 [libopmnoc4j] Host and Port information for port type default-web-site not sent by the OC4J process
07/10/18 10:54:45 [libopmnoc4j] WARNING: OC4J did not send the protocol value for port id: default-web-site
07/10/18 10:54:45 [libopmnoc4j] Port information in the ONS notification is incorrect for proc: 943261443. Some of the reasons for the failure are:
1. ajp, rmi and jms ports could not be bound by the process.
2. If a port value for a certain port ID is handed by OPMN to the OC4J process and this value is not returned back in the ONS notifications. For example, this can happen for certain bad JGroups related configurations. -
Schematron validation error in BPEL, Oracle Soa Suite 11g
Hi Friends,
As per the requirement, I have to validate all the mandatory element values from an XML payload and need to send the consolidated report to the source application with all the validation failure elements.
I am trying to implement Schematron validation in BPEL, but its giving me the following error:
+<remoteFault>+
+<part name="summary">+
+<summary>oracle.fabric.common.FabricException: Cannot get Object part 'result'. No parts are set on the message</summary>+
+</part>+
+<part name="detail">+
+<detail>Cannot get Object part 'result'. No parts are set on the message</detail>+
+</part>+
+</remoteFault>+
I have followed the below process and created very basic sample composite.
1) Extracted the validate.wsdl from bpm-services.jar.
2) Imported the validate.wsdl into my Jdev Project.
3) Created partenr link based on the validation.wsdl and used Invoke activty to invoke the partner link.
4) Created .sch file and passed to input variable of the invoke activity.
If any one knows about this issue, plz help me. Or if any one has developed an example on how to use schematron in BPEL plz share it with me.
Thanks
Ramesh1) How often did u see SOA suite being used in Non-Oracle Apps projects i.e projects that do not use Oracle Applications as the source data provider.Frankly speaking, not very often but still there are many customers who are using/willing to migrate on Oracle SOA Suite because of the many advantages provided by 11g stack.
2) How much Oracle Apps knowledge is required for choosing the career of Oracle SOA Suite Integration Architect? I would say that both the technologies have very less in common so it never depends on your level of Apps knowledge to architect a SOA solution. You have to learn SOA from scratch but if you have prior experience in Oracle Apps then it may not be very difficult for you to go ahead with SOA.
Regards,
Anuj -
Error deploying composite on SOA Suite 11g: premature EOF encountered
I am getting the following error when trying to deploy a SOA composite from Jdev 11.1.1.2.0 (on XP) to SOA suite 11.1.1.2.0 (on linux):
[10:36:43 AM] Error sending deployment request to server soa_server1 [xxx.xxx.x.xx:8001]
java.io.EOFException: Premature EOF encountered
More information:
[10:35:34 AM] >>>> Warning: Unable to determine the target platform from the Profile. Using default...
[10:35:34 AM] ---- Deployment started. ----
[10:35:34 AM] Target platform is (Weblogic 10.3).
[10:35:34 AM] Running dependency analysis...
[10:35:34 AM] Building...
[10:35:43 AM] Deploying profile...
[10:35:43 AM] Updating revision id for the SOA Project 'validationForCC.jpr' to '1.0'..
[10:35:43 AM] Wrote Archive Module to D:\po\CreditCardValidation\validationForCC\deploy\sca_validationForCC_rev1.0.jar
[10:35:43 AM] Deploying sca_validationForCC_rev1.0.jar to soa_server1 [xxx.xxx.x.xx:8001]
[10:35:43 AM] Processing sar=/D:/po/CreditCardValidation/validationForCC/deploy/sca_validationForCC_rev1.0.jar
[10:35:43 AM] Adding sar file - D:\po\CreditCardValidation\validationForCC\deploy\sca_validationForCC_rev1.0.jar
[10:35:43 AM] Preparing to send HTTP request for deployment
[10:35:43 AM] Creating HTTP connection to host:xxx.xxx.x.xx, port:8001
[10:35:43 AM] Sending internal deployment descriptor
[10:35:43 AM] Sending archive - sca_validationForCC_rev1.0.jar
[10:36:43 AM] Error sending deployment request to server soa_server1 [xxx.xxx.x.xx:8001]
java.io.EOFException: Premature EOF encountered
[10:36:43 AM] Error sending deployment request to server soa_server1 [xxx.xxx.x.xx:8001]
java.io.EOFException: Premature EOF encountered
[10:36:43 AM] #### Deployment incomplete. ####
[10:36:43 AM] Error deploying archive file:/D:/po/CreditCardValidation/validationForCC/deploy/sca_validationForCC_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
Who can help me solve this problem? The error always comes after exactly 1 minute.
_[10:35:43 AM]_ Sending archive - sca_validationForCC_rev1.0.jar
_[10:36:43 AM]_ Error sending deployment request to server soa_server1 [xxx.xxx.x.xx:8001]Problem is solved.
The problem was caused by configuration of my computer.
JDeveloper deployment needed to contact my application server by ip-adress and by alias.
I could only ping to my application server by ip-adress. -
Getting OPMN error while starting Oracle SOA Suite
Configuration information
Running in C:\product\10.1.3.1\OracleAS_1
Operation mode:Stop, App Server, No Enterprise Manager, Single Instance
Oracle home:C:\product\10.1.3.1\OracleAS_1
Oracle home name:Unnamed
Instance name:SOA_1.S119SNIQ056995.schneider.com
Instance type:allProducts
Version:10.1.3.3.0
Uses infrastructure:false
Not an infrastructure instance, no infrastructure information available
Components:[j2ee, orabpel, oraesb, owsm, Wsil]
2008-03-02 05:20:29.571--Begin log output for Mid-tier services (SOA_1.S119SNIQ056995.schneider.com)
2008-03-02 05:20:29.604--Processing Step: stopping OPMN managed processes
2008-03-02 05:20:34.945--End log output for Mid-tier services (SOA_1.S119SNIQ056995.schneider.com)
OPMN has thrown a control exception
oracle.appserver.startupconsole.model.ConsoleException: OPMN has thrown a control exception
at oracle.appserver.startupconsole.control.OPMNController.doStop(OPMNController.java:157)
at oracle.appserver.startupconsole.control.Controller.stop(Controller.java:79)
at oracle.appserver.startupconsole.control.GroupController.doStop(GroupController.java:52)
at oracle.appserver.startupconsole.control.Controller.stop(Controller.java:79)
at oracle.appserver.startupconsole.view.controller.ControllerAdapter.stop(ControllerAdapter.java:38)
at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:96)
at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
at oracle.ias.opmn.optic.AbstractOpmnEntity.stop(AbstractOpmnEntity.java:134)
at oracle.appserver.startupconsole.control.OPMNController.doStop(OPMNController.java:137)
... 6 more
Exception caused by
Error from opmn during process control operation
oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
at oracle.ias.opmn.optic.AbstractOpmnEntity.stop(AbstractOpmnEntity.java:134)
at oracle.appserver.startupconsole.control.OPMNController.doStop(OPMNController.java:137)
at oracle.appserver.startupconsole.control.Controller.stop(Controller.java:79)
at oracle.appserver.startupconsole.control.GroupController.doStop(GroupController.java:52)
at oracle.appserver.startupconsole.control.Controller.stop(Controller.java:79)
at oracle.appserver.startupconsole.view.controller.ControllerAdapter.stop(ControllerAdapter.java:38)
at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:96)
at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
<?xml version='1.0' encoding='WINDOWS-1252'?>
<response>
<msg code="-82" text="Remote request with weak authentication.">
</msg>
<opmn id="S119SNIQ056995:6200" http-status="406" http-response="no processes or applications matched this request">
</opmn>
</response>I have found out the problem and solution for this OPMN error, its actually our Fusion team work
the error is caused by Port conflicts we believe
so by using these set of commands of opmnctl
usage: opmnctl [verbose] [<scope>] <command> [<options>]
verbose: print detailed execution message if available
Permitted <scope>/<command>/<options> combinations are:
scope command options
start - Start opmn
startall - Start opmn & all managed processe
stopall - Stop opmn & all managed processe
shutdown - Shutdown opmn & all managed proce
[<scope>] startproc [<attr>=<val> ..] - Start opmn managed processes
[<scope>] restartproc [<attr>=<val> ..] - Restart opmn managed processes
[<scope>] stopproc [<attr>=<val> ..] - Stop opmn managed processes
[<scope>] reload - Trigger opmn to reread opmn.xml
[<scope>] status [<options>] - Get managed process status
[<scope>] dmsdump [<attr>=<val>&..] - Get DMS stats
[<scope>] set [<attr>=<val> ..] - Set opmn log parameters
[<scope>] query [<attr>=<val>] - Query opmn log parameters
ping [<max_retry>] - Ping local opmn
validate [<filename>] - Validate the given xml file
config [<options>] - Modify the opmn xml file
help - Print brief usage description
usage [<command>] - Print detailed usage description
we have shutdown the opmn box and restarted all of its process
it did not happen in the first time itself i have to repeat this for a several times then the SOA suite is running normally
if any one faces this issue i can help -
Error while starting the AqAdapter in SOA Suite 11g Admin Console
facing an issue with the AqAdapter(Resource Adapter) in Soa Suite 11g Admin Console.
we go to Deployments --> Select Aq Adapter --> Currently it shows the status as Prepared
Now we try to Start it again --> it comes back with the error message mentioned below
weblogic.application.ModuleException: weblogic.connector.exception.RAException:
Jndi Name is null or empty. Errors were encountered while performing this operation.
source path on the admin server is mentioned here for this AqAdapter:
/opt101/app/oracle/SOAD/SOA11gR1/fmw/Oracle_SOA1/soa/connectors/AqAdapter.rar
deployment plan :
/opt101/app/oracle/SOAD/SOA11gR1/fmw/Oracle_SOA1/soa/connectors/was/Plan. xml
We check in the Configuration tab --> Outbound Connection Pools -->
here it shows the Group as javax.resource.cci.ConnectionFactory and under it we have setup
2 connection pool instances with JNDI names as : eis/AQ/aqSample & eis/aq/B2BAQ
Could someone please help here as to what could be the reason why this error is coming and
how we could resolve this.
With Regards & thanksThis is what we have done :
1.Created the JDBC data source & connection pool as below :
data source name : B2BAQ , JNDI name : jdbc/B2BAQ
Connection Pool :
URL : taken from the tns entries of the instance
Driver Class Name : oracle.jdbc.OracleDriver
Tested this connection ..it works fine from the Admin Console
2.Then go to Deployments --> AqAdapter -> Configuration tab --> Outbound Connection Pool Group -->
Create a new connection pool instance -- General tab
connection interface factory : javax.resource.cci.ConnectionFactory
JNDI Name : eis/AQ/B2BAQ
Then in Properties tab : Enter the Data Source Name : jdbc/B2BAQ
Then we try to Start the AqAdapter from the Admin Console..it goes into Prepared status.
The error message which comes is mentioned above.
Is there any way we could resolve this ..that would be very helpful
Regards
Edited by: user5149250 on Mar 13, 2012 6:33 AM -
Error message deploying a composite in SOA Suite 11g
Hello,
We are attempting to deploy a composite to SOA Suite 11g (11.1.1.3). We're getting an 'Unable to register service' error message. When I inspect the log files I see the following entry as the first error:
Failed to retrieve policy[[
oracle.wsm.policyaccess.PolicyAccessException: WSM-06146 : Error deleting the attachment entries.
Anybody have any experience with this error? The error message reference has the following listed:
WSM-06146: Error deleting the attachment entries.
Cause: Failure occurred while deleting the attachment entries.
Action: Ensure that a valid list of policy subjects for deactivated lifecycle type is passed
Level: 32
Type: INCIDENT_ERROR
Impact: Configuration
I don't know how to "ensure that a valid list of policy subjects for deactivated lifecycle type is passed". Please help!!!!
Thanks,
jhThis is what we have done :
1.Created the JDBC data source & connection pool as below :
data source name : B2BAQ , JNDI name : jdbc/B2BAQ
Connection Pool :
URL : taken from the tns entries of the instance
Driver Class Name : oracle.jdbc.OracleDriver
Tested this connection ..it works fine from the Admin Console
2.Then go to Deployments --> AqAdapter -> Configuration tab --> Outbound Connection Pool Group -->
Create a new connection pool instance -- General tab
connection interface factory : javax.resource.cci.ConnectionFactory
JNDI Name : eis/AQ/B2BAQ
Then in Properties tab : Enter the Data Source Name : jdbc/B2BAQ
Then we try to Start the AqAdapter from the Admin Console..it goes into Prepared status.
The error message which comes is mentioned above.
Is there any way we could resolve this ..that would be very helpful
Regards
Edited by: user5149250 on Mar 13, 2012 6:33 AM -
Error invoking Oracle Application Adapter part of SOA Suite 11g
We are using Oracle application adapter from BPEL process manager ( SOA Suite 11g) to call PLSQL:OE_ORDER_PUB:PROCESS_ORDER (EBS R12).
The call returns error : "<ns0:X_MSG_DATA
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="">FND
FND_AS_UNEXPECTED_ERROR N PKG_NAME OE_Order_PVT N PROCEDURE_NAME Lines N
ERROR_TEXT ORA-06502: PL/SQL: numeric or value error: NULL index table key
value </ns0:X_MSG_DATA>"
The same order gets created from PLSQL but fails while trying from BPEL through Oracle APPS adapter. The dbg file at the EBS end is given below:
Session Id:5695950
Entering OE_HEADER_UTIL.GET_IDS
Exiting OE_HEADER_UTIL.GET_IDS
Entering OE_HEADER_UTIL.GET_IDS
Exiting OE_HEADER_UTIL.GET_IDS
ENTER SET RECURSION MODE
ENTITY CODE-1
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PUB.PROCESS_ORDER
LEAVING OE_MSG_PUB.INITIALIZE
ENTER PROCESS_ORDER_AG
BEFORE HEADER PROCESSING
HEADER_ID22020
OPERATIONCREATE
ENTER SET RECURSION MODE
ENTITY CODE-2
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PVT.HEADER
OE_ORDER_PVT.HEADER AFTER INIT CONTROL REC
OPERATION = CREATE SO SET OLD TO NULL
Entering OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
Exiting OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
ENTER OE_HEADER_SECURITY.ATTRIBUTES
VALIDATE ATTRIBUTES
Entering OE_VALIDATE_HEADER.ATTRIBUTES
Entering OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
Exiting OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
Entering OE_ORDER_CACHE.LOAD_ORDER_TYPE
Exiting OE_ORDER_CACHE.LOAD_ORDER_TYPE
Entering OE_ORDER_CACHE.LOAD_Payment_Term
Exiting OE_ORDER_CACHE.LOAD_Payment_Term
Entering OE_ORDER_CACHE.LOAD_PRICE_LIST
Exiting OE_ORDER_CACHE.LOAD_PRICE_LIST
Entering OE_ORDER_CACHE.LOAD_Salesrep_rec
Exiting OE_ORDER_CACHE.LOAD_Salesrep
Exiting OE_VALIDATE_HEADER.ATTRIBUTES
DEFAULT MISSING
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for INSTALLMENT_OPTIONS
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value fetched from table.
PARAMETER VALUE:
In OE_Contracts_util.check_license
performing check first time, lx_status: I
l_sales_contracts_enabled: N
SET CODE
AFTER SET CODE
Enter get_freight_carrier()
Entering OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for SET_OF_BOOKS_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
ENTERING OE_SYS_PARAMETERS_PVT.GET_AR_SYS_PARAMS ...
Querying the table for the AR details ..
Exiting OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
AFTER DEFAULT MISSING
APPLY ATTRIBUTE CHANGES
Entering OE_HEADER_UTIL.APPLY_ATTRIBUTE_CHANGES
Raj1
Raj2
Raj3
Raj4
before getting payment count
Exiting OE_HEADER_UTIL.APPLY_ATTRIBUTE_CHANGES
ENTER OE_HEADER_SECURITY.ENTITY
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for AUDIT_TRAIL_ENABLE_FLAG
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
VALUE FROM DBE
Parameter value fetched from table.
PARAMETER VALUE: E
ENTER OE_PC_CONSTRAINTS_ADMIN_PVT.IS_OP_CONSTRAINED , COLUMN:
EXIT OE_PC_CONSTRAINTS_ADMIN_PVT.IS_OP_CONSTRAINED , RESULT:0
EXIT OE_HEADER_SECURITY.ENTITY
Entering OR_HEADER_UTIL.Pre_Write_Process
No prepayments for the order
Entering OE_HEADER_UTIL.Get_Order_Number
Entering OE_HEADER_UTIL.Get_Order_Number
Ordertype is :1087
Entering OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for SET_OF_BOOKS_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
ENTERING OE_SYS_PARAMETERS_PVT.GET_AR_SYS_PARAMS ...
Getting the AR details from the cache ..
Exiting OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
Entering OE_ORDER_CACHE.LOAD_ORDER_TYPE
Exiting OE_ORDER_CACHE.LOAD_ORDER_TYPE
before calling get_seq_info
Category Code1087
Set of Books2021
after calling get_seq_info
fndseqresult0
fndseqtype1017
p_old_header_rec.order_number:
p_old_header_rec.transaction_phase_code:
Exiting OR_HEADER_UTIL.Get_Order_Number
Exiting OR_HEADER_UTIL.Pre_Write_Process
WRITE TO DB
Entering OE_HEADER_UTIL.INSERT_ROW
ENTERING OE_ORDER_UTIL.UPDATE_GLOBAL_PICTURE
UI FLAG IS FALSE
CODE_RELEASE_LEVEL=120004
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
P_HEADER_ID=22020
P_HEADER_REC.HEADER_ID=22020
OD GLOBAL HEADER_ID= 22020
NEW GLOBAL HEADER_ID= 22020
EXITING OE_ORDER_UTIL.UPDATE_GLOBAL_PICTURE
returned index is: 1
Exiting OE_HEADER_UTIL.INSERT_ROW
Entering OE_HEADER_UTIL.Post_Write_Process
ENTER SET RECURSION MODE
ENTITY CODE-11
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
Entering Procedure Process_Request_Pvt
Request type DFLT_HSCREDIT_FOR_SREP
Entering OE_DELAYED_REQUESTS_UTIL.DFLT_HSCREDIT_PRIMARY_SREP
ENTERING OE_HEADER_SCREDIT_UTIL.DFLT_HSCREDIT_PRIMARY_SREP
ENTER SET RECURSION MODE
ENTITY CODE-4
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PVT.HEADER_SCREDITS
ENTER OE_HEADER_SCREDIT_SECURITY.ATTRIBUTES
Entering OE_VALIDATE_Header_Scredits.Attributes
Entering OE_ORDER_CACHE.LOAD_Salesrep_rec
Exiting OE_ORDER_CACHE.LOAD_Salesrep
Exiting OE_VALIDATE_Header_Scredits.Attributes
Entering OE_VALIDATE_Header_Scredits.Entity
Entering OE_VALIDATE_Header_Scredits.Duplicate_salescredit
Exiting OE_VALIDATE_Header_Scredits.Duplicate_salescredit
Exiting OE_VALIDATE_Header_Scredits.Entity
ENTER OE_HEADER_SCREDIT_SECURITY.ENTITY
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for AUDIT_TRAIL_ENABLE_FLAG
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: E
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
ENTER OE_PC_CONSTRAINTS_ADMIN_PVT.IS_OP_CONSTRAINED , COLUMN:
EXIT OE_PC_CONSTRAINTS_ADMIN_PVT.IS_OP_CONSTRAINED , RESULT:0
EXIT OE_HEADER_SCREDIT_SECURITY.ENTITY
ENTERING OE_HEADER_SCREDIT_UTIL.INSERT_ROW
ENTERING OE_ORDER_UTIL.UPDATE_GLOBAL_PICTURE
UI FLAG IS FALSE
CODE_RELEASE_LEVEL=120004
P_HDR_SCR_ID=64168
ENTERING OE_ORDER_UTIL.RETURN_GLB_ENT_INDEX
EXITING OE_ORDER_UTIL.RETURN_GLB_ENT_INDEX
INDEX=641680001
L_RETURN_STATUS =S
L_RESULT =F
OLD SCR_ID 64168
NEW SCR_ID64168
EXITING OE_ORDER_UTIL.UPDATE_GLOBAL_PICTURE
RETURNED INDEX IS: 641680001
EXITING OE_HEADER_SCREDIT_UTIL.INSERT_ROW
EXITING OE_ORDER_PVT.HEADER_SCREDITS
ENTER SET RECURSION MODE
ENTITY CODE-4
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
EXITING OE_HEADER_SCREDIT_UTIL.DFLT_HSCREDIT_PRIMARY_SREP
Exiting OE_DELAYED_REQUESTS_UTIL.DFLT_HSCREDIT_PRIMARY_SREP
leaving Process_Request_Pvt
ENTER SET RECURSION MODE
ENTITY CODE-11
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
leaving process_requenst_for_reqtype
Before calling eval_post_write_header in HEADER Post Write
ENTERING EVAL_POST_WRITE_HEADER
M_HOLD_ENTITY_CODE/M_HOLD_ENTITY_ID:C/13489
RETRIEVING NEW HOLD SOURCE RECORD
HOLD SOURCE RECORD NOT FOUND , EXITING
EXITING EVAL_POST_WRITE_HEADER
After calling eval_post_write_header in HEADER Post Write
Before calling OE_SCHEDULE_UTIL
ENTERING INSERT_INTO_MTL_SALES_ORDERS
CALLING INVS CREATE_SALESORDER
ORDER TYPE: Cochin Order
SOURCE CODE: ORDER ENTRY
ORDER NUMBER : 1017
L_MSG_COUNT
RETURN STATUS S
EXITING INSERT_INTO_MTL_SALES_ORDERS
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_HEADER_UTIL.Post_Write_Process
EXITING OE_ORDER_PVT.HEADER
ENTER SET RECURSION MODE
ENTITY CODE-2
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
AFTER HEADER PROCESSING HEADER_ID = 22020
AFTER HEADER_ADJS PROCESSING
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
Enter OE_Delayed_Requests_Pvt.Process_Request_for_Entity
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
AFTER HEADER_PRICE_ATTS PROCESSING
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
Enter OE_Delayed_Requests_Pvt.Process_Request_for_Entity
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
Enter OE_Delayed_Requests_Pvt.Process_Request_for_Entity
Entering Procedure Process_Request_Pvt
Request type CHECK_HSC_QUOTA_TOTAL
Entering OE_DELAYED_REQUESTS_UTIL.VALIDATE_HSC_QUOTA_TOTAL
Entering OE_VALIDATE_Header_Scredits.Validate_HSC_QUOTA_TOTAL
Exiting OE_VALIDATE_Header_Scredits.Validate_HSC_QUOTA_TOTAL
Exiting OE_DELAYED_REQUESTS_UTIL.VALIDATE_HSC_QUOTA_TOTAL
leaving Process_Request_Pvt
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
Enter OE_Delayed_Requests_Pvt.Process_Request_for_Entity
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
BEFORE LINES PROCESSING
ENTER SET RECURSION MODE
ENTITY CODE-5
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
Entering OE_ORDER_PVT.LINES 1: 15-OCT-09 18:31:47
---------LOOPING FOR NTH TIME N= 1
OPERATION = CREATE SO SETTING OLD TO NULL
Entering OE_LINE_UTIL.CONVERT_MISS_TO_NULL
outside margin convert miss to null
inside margin convert miss to null
Exiting OE_LINE_UTIL.CONVERT_MISS_TO_NULL
AT LINE LEVEL HEADER_ID22020
Entering OE_HEADER_UTIL.LOCK_ROW
Entering OE_HEADER_UTIL.QUERY_ROW
Before caching OE_HEADER_UTIL.QUERY_ROW
Exiting OE_HEADER_UTIL.QUERY_ROW
selected for update, now compare
STANDARD LINE
L_MODE IS MODELS_AND_STANDARD
0
STARTING LINE LOOP. HEADER_ID = 22020
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
VALUE FROM DB83
Parameter value fetched from table.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 9.990000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E+125
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
querying item from mtl_system_items
querying based on ship_from_org
Exiting OE_ORDER_CACHE.LOAD_ITEM
Dual_uom_control is FALSE
CHECK ATTRIBUTES SECURITY
Enter OE_LINE_Security.Attributes
ATTRIBUTE VALIDATION
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
Enter procedure OE_validate_line.Attributes
Header has got created in the same call
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
Entering OE_ORDER_CACHE.LOAD_LINE_TYPE
p_key is not null
before selecting line_type info : G_MISS_CHAR
after selecting line_type info : G_MISS_CHAR
tax_flag :
Exiting OE_ORDER_CACHE.LOAD_LINE_TYPE
Checking for Ship Dates....
Checking for Arival Dates....
item_relationship_type :
preferred_grade:
Exiting procedure OE_validate_line.Attributes
AFTER ATTRIBUTE VALIDATION
DEFAULT MISSING
ENTER OE_DEFAULT_LINE.ATTRIBUTES
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 5429
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
Exiting OE_ORDER_CACHE.LOAD_ITEM
IN DEFAULTING: FUNCTION GET_ITEM_TYPE
THE INV ITEM IS5429
line_category_code = ORDER
retrobill_request_id =
item_type_code =
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 5429
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
Exiting OE_ORDER_CACHE.LOAD_ITEM
CALLING GET_SMC
DEFAULTING SMC FLAG
GET SMC: TOP MODEL LINE ID :
CALLING GET_ATO
IN GET_ATO_LINE , ITEM_TYPE_CODE :STANDARD
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 5429
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
Exiting OE_ORDER_CACHE.LOAD_ITEM
GET_ATO_LINE: NY
RETURN ATO_LINE_ID AS NULL
ENTERING MODEL_OPTION_DEFAULTING
LINE_ID TO DEFAULT:
IB Owner:
IB Install:
IB Current:
Entering OE_CONFIG_TSO_PVT.Is_Part_of_Container_Model..: 15-OCT-09 18:31:47
Line Id :
Top Model Line id:
ATO Line id:
operation :
inv item : 5429
Inventory Item id:5429
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
BOM Item Type:4
Replenish to Order:N
Config Model Type:
Top Container Model?:N
Part of Container Model?:N
Exiting OE_CONFIG_TSO_PVT.Is_Part_Of_Container_Model..: 15-OCT-09 18:31:47
RETURNING FOR ITEM TYPE MODEL AND STANDARD
TOLERANCE BELOW :
TOLERANCE BELOW :
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for INSTALLMENT_OPTIONS
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE:
Before Defaulting P_Qty and P_Qty_Uom Values:
Pricing Qty: 20
Pricing UOM:
Ordered Qty: 20
Ordered UOM: EA
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 5429
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
Exiting OE_ORDER_CACHE.LOAD_ITEM
Dual_uom_control is FALSE
SHIP FROM OR SHIP METHOD IS NULL/MISSING
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
CALLING GET SHIPPABLE_FLAG
1 , ATO_LINE_ID:
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 5429
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
Exiting OE_ORDER_CACHE.LOAD_ITEM
SHIPPABLE FLAG: Y
SETTING RE_SOURCE_FLAG TO N
EXIT OE_DEFAULT_LINE.ATTRIBUTES
APPLY ATTRIBUTE CHANGES
Entering OE_LINE_UTIL.APPLY_ATTRIBUTE_CHANGES
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
Entering OE_ORDER_CACHE.GET_TAX_CALCULATION_FLAG
Entering OE_ORDER_CACHE.LOAD_LINE_TYPE
p_key is not null
Exiting OE_ORDER_CACHE.LOAD_LINE_TYPE
ENTER RETURN_LINE
EXIT , THIS IS A REGULAR LINE
Entering OE_ORDER_CACHE.LOAD_CUST_TRX_TYPE
Exiting OE_ORDER_CACHE.LOAD_CUST_TRX_TYPE
Exiting OE_ORDER_CACHE.GET_TAX_CALCULATION_FLAG
Entering OE_ORDER_CACHE.Enforce_List_price
Exiting OE_ORDER_CACHE.Enforce_List_price
old calculate price flag G_MISS_CHAR
new calculate price flagY
Freeze method is :BOOKING
FTE IS NOT INSTALLED!
OE_GLOBALS.G_PRICING_RECURSION:N
Entering OE_LINE_UTIL.UPDATE_ADJUSTMENT_FLAGS
New Item, dont have to do anything
Exiting OE_LINE_UTIL.UPDATE_ADJUSTMENT_FLAGS
Freeze method is :BOOKING
FTE IS NOT INSTALLED!
FTE IS NOT INSTALLED!
Ordered Qty has changed
New Ordered Qty : 20
Old Ordered Qty :
Freeze method is :BOOKING
B2315926_2:
FTE IS NOT INSTALLED!
FTE IS NOT INSTALLED!
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 5429
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
Exiting OE_ORDER_CACHE.LOAD_ITEM
Dual_uom_control is FALSE
FTE IS NOT INSTALLED!
FTE IS NOT INSTALLED!
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for ENABLE_FULFILLMENT_ACCEPTANCE
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value fetched from table.
PARAMETER VALUE:
CSH --OUT of l_copy_service_field condition
LEAVING OE_MSG_PUB.ADD
ENTER SET RECURSION MODE
ENTITY CODE-5
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
PO: EXITING PROCESS ORDER WITH UNEXPECTED ERROR
ENTER SET RECURSION MODE
ENTITY CODE-1
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
DELETE REQUEST12
ENTERING DELETE_ATTRIBUTE_CHANGES -1
LEAVING OE_MSG_PUB.COUNT_AND_GET 1
Entering OE_HEADER_UTIL.GET_VALUES
In OE_Contracts_util.check_license
cache already has value, OE_CONTRACTS_UTIL.G_BSA_CNTR_LICENSE: N
Exiting OE_HEADER_UTIL.GET_VALUES
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
Entering OE_HEADER_UTIL.GET_IDS
Exiting OE_HEADER_UTIL.GET_IDS
Entering OE_HEADER_UTIL.GET_IDS
Exiting OE_HEADER_UTIL.GET_IDS
ENTER SET RECURSION MODE
ENTITY CODE-1
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PUB.PROCESS_ORDER
LEAVING OE_MSG_PUB.INITIALIZE
ENTER PROCESS_ORDER_AG
BEFORE HEADER PROCESSING
HEADER_ID
OPERATIONCREATE
ENTER SET RECURSION MODE
ENTITY CODE-2
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PVT.HEADER
OE_ORDER_PVT.HEADER AFTER INIT CONTROL REC
OPERATION = CREATE SO SET OLD TO NULL
Entering OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
Exiting OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
ENTER OE_HEADER_SECURITY.ATTRIBUTES
VALIDATE ATTRIBUTES
Entering OE_VALIDATE_HEADER.ATTRIBUTES
Entering OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
Exiting OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
Entering OE_ORDER_CACHE.LOAD_ORDER_TYPE
Exiting OE_ORDER_CACHE.LOAD_ORDER_TYPE
Entering OE_ORDER_CACHE.LOAD_Payment_Term
Exiting OE_ORDER_CACHE.LOAD_Payment_Term
Entering OE_ORDER_CACHE.LOAD_Salesrep_rec
Exiting OE_ORDER_CACHE.LOAD_Salesrep
Exiting OE_VALIDATE_HEADER.ATTRIBUTES
DEFAULT MISSING
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for INSTALLMENT_OPTIONS
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE:
In OE_Contracts_util.check_license
cache already has value, OE_CONTRACTS_UTIL.G_BSA_CNTR_LICENSE: N
SET CODE
AFTER SET CODE
Enter get_freight_carrier()
Entering OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for SET_OF_BOOKS_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
ENTERING OE_SYS_PARAMETERS_PVT.GET_AR_SYS_PARAMS ...
Getting the AR details from the cache ..
Exiting OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
AFTER DEFAULT MISSING
APPLY ATTRIBUTE CHANGES
Entering OE_HEADER_UTIL.APPLY_ATTRIBUTE_CHANGES
Raj1
Raj2
LEAVING OE_MSG_PUB.ADD
ENTER SET RECURSION MODE
ENTITY CODE-2
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
DELETE REQUEST2
ENTERING DELETE_ATTRIBUTE_CHANGES -1
PO: EXITING PROCESS ORDER WITH UNEXPECTED ERROR
ENTER SET RECURSION MODE
ENTITY CODE-1
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
DELETE REQUEST12
ENTERING DELETE_ATTRIBUTE_CHANGES -1
LEAVING OE_MSG_PUB.COUNT_AND_GET 1
Entering OE_HEADER_UTIL.GET_VALUES
In OE_Contracts_util.check_license
cache already has value, OE_CONTRACTS_UTIL.G_BSA_CNTR_LICENSE: N
Exiting OE_HEADER_UTIL.GET_VALUES
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
Entering OE_HEADER_UTIL.GET_IDS
LEAVING OE_MSG_PUB.ADD
Exiting OE_HEADER_UTIL.GET_IDS
Entering OE_HEADER_UTIL.GET_IDS
Exiting OE_HEADER_UTIL.GET_IDS
ENTER SET RECURSION MODE
ENTITY CODE-1
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PUB.PROCESS_ORDER
LEAVING OE_MSG_PUB.INITIALIZE
ENTER PROCESS_ORDER_AG
BEFORE HEADER PROCESSING
HEADER_ID
OPERATIONCREATE
ENTER SET RECURSION MODE
ENTITY CODE-2
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PVT.HEADER
OE_ORDER_PVT.HEADER AFTER INIT CONTROL REC
OPERATION = CREATE SO SET OLD TO NULL
Entering OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
Exiting OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
ENTER OE_HEADER_SECURITY.ATTRIBUTES
VALIDATE ATTRIBUTES
Entering OE_VALIDATE_HEADER.ATTRIBUTES
Entering OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
Exiting OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
Entering OE_ORDER_CACHE.LOAD_ORDER_TYPE
Exiting OE_ORDER_CACHE.LOAD_ORDER_TYPE
Entering OE_ORDER_CACHE.LOAD_Payment_Term
Exiting OE_ORDER_CACHE.LOAD_Payment_Term
Entering OE_ORDER_CACHE.LOAD_PRICE_LIST
Exiting OE_ORDER_CACHE.LOAD_PRICE_LIST
Entering OE_ORDER_CACHE.LOAD_Salesrep_rec
Exiting OE_ORDER_CACHE.LOAD_Salesrep
Exiting OE_VALIDATE_HEADER.ATTRIBUTES
DEFAULT MISSING
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for INSTALLMENT_OPTIONS
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE:
In OE_Contracts_util.check_license
cache already has value, OE_CONTRACTS_UTIL.G_BSA_CNTR_LICENSE: N
SET CODE
AFTER SET CODE
Enter get_freight_carrier()
Entering OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for SET_OF_BOOKS_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
ENTERING OE_SYS_PARAMETERS_PVT.GET_AR_SYS_PARAMS ...
Getting the AR details from the cache ..
Exiting OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
AFTER DEFAULT MISSING
APPLY ATTRIBUTE CHANGES
Entering OE_HEADER_UTIL.APPLY_ATTRIBUTE_CHANGES
Raj1
Raj2
LEAVING OE_MSG_PUB.ADD
ENTER SET RECURSION MODE
ENTITY CODE-2
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
DELETE REQUEST2
ENTERING DELETE_ATTRIBUTE_CHANGES -1
PO: EXITING PROCESS ORDER WITH UNEXPECTED ERROR
ENTER SET RECURSION MODE
ENTITY CODE-1
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
DELETE REQUEST12
ENTERING DELETE_ATTRIBUTE_CHANGES -1
LEAVING OE_MSG_PUB.COUNT_AND_GET 1
Entering OE_HEADER_UTIL.GET_VALUES
In OE_Contracts_util.check_license
cache already has value, OE_CONTRACTS_UTIL.G_BSA_CNTR_LICENSE: N
Exiting OE_HEADER_UTIL.GET_VALUES
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
Request help.
Thank you
Vijosh
Edited by: user8690315 on Oct 20, 2009 12:19 AMHi,
I am also same problem while creating the Sales Order.
Did you find any solution for this problem??
Thanks,
-- Eric. -
SOA Suite 11g Clustering error/oracle bug ?
Hi, i got several experiment to implement soa suite 11g clustering, in my company.. at this moment we still use development mode in our application server. now i'm trying to get into production and also i want cluster the server.. here is the chronology what i do.
i got 3 server :
my plan is
server #1 become an proxy server, let say the name is soa_proxy
server #2 become an cluster node, let say the name is soa_server1
server #3 become an cluster node, let say the name is soa_server2
so i start install & configure it (applications is running under Windows Server 2003)
1.*soa_proxy*
- Installing WebLogic server
- Installing SOA
- Create Repository with RCU (oracle 10g database)
2.*soa_server1*
- Installing WebLogic server
- Installing SOA
3.*soa_server2*
- Installing WebLogic server
- Installing SOA
after installation finished, then i create domain in soa_proxy server let say it name 'MyDomain', then i assign the soa_server1 and soa_server2 in cluster node named 'MyCluster', also i assign the soa_proxy server as a HTTP Proxy Server.. i'm following the instructions just like this link Link: [http://download.oracle.com/docs/cd/E12839_01/doc.1111/e13925/config_screens.htm#CJAEABGD]
all the installation seems good, but when i try to deploy my composite application into the proxy server 'soa_proxy' with JDev, i got error like this
Image: !http://img9.imageshack.us/img9/2122/error2z.jpg!
and when i go to Http://hostname:7001/em
i just see my composite deployed only in 'soa_server2'.
UPDATE : well, now the error was gone when deploying. but we still got little odd result,
when i deploy with jdev, it still fine, until i go to the enterprise manager. yess still.. my composite only deplyed in 'soa_server1'. i got some reference that we can copy the domain directory in soa_proxy and then paste into the server that not yet been deployed before. its seems oke..
i've been thinking, how if i got 10 node of cluster? 50 node of cluster ? should i copy the directory just like that ?? is there another charmed way to do it???
can somebody help me with this simple case?
regards
Wildan
Edited by: wildsoft on Feb 12, 2010 11:33 AM
=======
here is my last trial to deploy the cluster environment, then i just got the same issues, our team here think thats the issues causing by oracle bug in code behind. for reminder what i do last experiment
1. we deploy/configure the domain (admin console,cluster node) then starting up all the services smoothly without no issues & as we saw in the console monitor we can see the cluster is syncronizing.
2. then we create simple composite.
3. we try to deploy the composite to the cluster domain, and what we got is the composite only deployed in one cluster node.
let me describe to clear it,
* first trial, when we deploy the composite, here is what we got in em console
*[-] SoaInfra (SoaServer1)*
[+] CompositeLabTest
*[-] SoaInfra (SoaServer2)*
in JDev we also saw this message (the project CompositeLabTest Deploy Process is skipped), some kind like that
* second time trial, we try to shut the SoaServer2 down, then restart it, what we got in em console
*[-] SoaInfra (SoaServer1)*
[+] CompositeLabTest
*[-] SoaInfra (SoaServer2)*
[+] CompositeLabTest
. so until today my soa suite 11g clustering experience is never going good practice.. any of you may had experience with clustering too, how that can be done? please respon...
thanks
regards
Wildan Abdat
Edited by: wildsoft on Apr 27, 2010 4:08 PM
Edited by: wildsoft on Apr 27, 2010 4:13 PMHi there.
Me too I have a similar problem with cluster deployment.
I have two different domains in two different phisical machine on the same LAN.
These domains are equals and the sole difference is regarding the IP configuration:
domain 1
machine 172.0.0.1
soaadmin 172.0.0.1
soa1 172.0.0.2
soa1 172.0.0.3
domain 2
machine 172.0.1.1
soaadmin 172.0.1.1
soa1 172.0.1.2
soa1 172.0.1.3
When I try to deploy a new composite from the EM this fails (it remains in waiting for a response like the followed)
<Jun 18, 2010 10:42:00 AM CEST> <Warning> <org.apache.myfaces.trinidadinternal.context.RequestContextImpl> <BEA-000000> <Could not find partial trigger idArchiveFileBrowserDialog from RichInputText[UIXEditableFacesBeanImpl, id=idArchiveLoc]>
Processing sar=/tmp/dir2448127768139530528tmp/sca_SOAComposite1_rev1.0.jar
Adding sar file - /tmp/dir2448127768139530528tmp/sca_SOAComposite1_rev1.0.jar
Creating HTTP connection to host:172.0.0.2, port:10002
What I checked:
In multicast configuration soa1 (domain1) sent the request to all soa servers in the LAN (even in that one that aren't configurated in his domain)
In unicast configuration soa1 (domain1) sent the request only to the soa2 (domain1) server but it remain in waiting for a response for all the time.
What it is strange is that if I stop the domain2 the request can be performed and my composite is deployed in both the servers.
Any idea about this strange behaviour?
N.B.
I'm not using Coherence. -
Oerror while inserting in to 11g database from SOA suite 11g db adaptor
Hi,
I am getting following error while inserting in to 11g database from SOA suite 11g database adaptor. Can you please help me on this.
"{http://schemas.oracle.com/bpel/extension}bindingFault" has been thrown.
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'insert' failed due to: DBWriteInteractionSpec Execute Failed Exception. insert failed. Descriptor name: [LoggerDBInsert.LoggedError]. Caused by java.sql.SQLSyntaxErrorException: ORA-01722: invalid number . ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. ORA-01722: invalid number 1722
Regards,
BharatIt looks like you try to insert a string-value in a number-column.
can you check all your assign and their values before you invoke the db-adapter, then you should be able to narrow down the problem. -
SOA Suite 11g installation - B2B issue
Hi guys,
I just installed windows SOA Suite 11g on my machine. When I access the B2B and try to create a new version, I get the following error:
MDS-00522: failure to save document /soa/b2b/doc_EDI_X12.xml to the metadata repository
ORA-01573: shutting down instance, no further change allowed
ORA-01573: shutting down instance, no further change allowed
I am pretty sure that I need to change the configuration somewhere so that it does not save the file on some linux directory, but saves on my C drive somewhere. But I could not find the configuration location. I would really appreciate your help in this regard. ThanksSeems like it is a SOA Suite installation issue. I am closing this post.
Maybe you are looking for
-
New objects not visible in report objectpicker
Hi, I'm new to SCOM so please forgive me if I say something wrong. We are using SCOM 2007 R2. In Operations Console I've created 2 new Web Applications in Authoring view. In Reporting view I open Availability report from Microsoft Generic Report Lib
-
Dear Forum Mac Guru's, I know this has been asked a few times before but I thought all the comments I've read so far have not been quite my situation. So here I go... I was wondering if you are able to help diagnose a problem I am having with my Pism
-
How to get paired Auvio wireless speakers to connect and play on 2008 Macbook Pro
How do I get wireless speakers to play after successfully paired in system preferences of 2008 macbook pro? When both turned on they will not connect.
-
Installation issue with Oracle 10G Express Edition
I have installed both this product and the Enterprise Manager in the past (on the same laptop that I am using now), however when I try to download the file for my current class I get a dialog box that tells me that the file type is unknown and Window
-
How to check the expired date of a public key stored in my keyStore
Hello, I would like to know if there is any possibility to check the expiration date of a public key which is present in my keystore. I did read the help of keytool but did not found any explanation about that. Thanks in advance for your answers. Ala