Error while installing business content.

Hi Guys,
I am trying to install busineness content for 0BPARTNER. while i am installing i am getting the below error.
InfoObject 0CUST_CLA is used in transfer rules (M) of characteristic 0BPARTNER
Please help me to take the action to correct this error.
thanks in advance
peter b

Hi,
Please check 0CUST_CLA  this infoobject is activated or not if not pls active that.
http://help.sap.com/saphelp_nw70/helpdata/en/a2/2af638350d5654e10000000a11402f/frameset.htm
Regards,
Madhu

Similar Messages

  • OBJECTS_OBJREF_NOT_ASSIGNED : Error while installing business content

    Hi
    Error occured while installing business content
    ABAP/4 Processor:OBJECTS_OBJREF_NOT_ASSIGNED
    Please help me how to resolve the issue
    Regards
    ASR

    Hi,
    Check in SDN... becasue there are n number of resons for that..
    /thread/1056689 [original link is broken]
    http://sap.ittoolbox.com/groups/technical-functional/sap-dev/erro-in-background-job-abap4-processor-objects_objref_not_assigned-252195
    Thanks
    Reddy

  • Errors while installing Business Content

    Hi,
    It is new system, When I am trying to install any Infocube it has given Runtime error OBJECTS_OBJREF_NOT_ASSIGNED. Then implemented the SAP note 1019055.
    To Install Business Content I am following: Grouping: In Data flow before and After wards, Collection Mode- Collect Automatically, Source System Assignment and Install .
         Now when I am trying to install I am getting these errors
    Process LOADING, variant 0PAK_0U36G4BPCOA4BN43PFVZU3A97 has been saved in target system under name1
    Process LOADING, variant 0PAK_0AWN44OD08M313H1SIIA96HT7 has been saved in target system under name 1     
    Process variant LOADING 0PAK_0AWN44OD08M313H1SIIA96HT7 does not exist in version A
    A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_0AWN44OD08M313H1SIIA96HT7 in the chain
    A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_0AWN44OD08M313H1SIIA96HT7 in the chain
    Process variant LOADING 0PAK_0MPC1AWCV7TGZ1CJ843SRIJZD does not exist in version A
    InfoPackage  no longer exists in object version A in table RSLDPIO
    Variant '0PAK_1909HG1UYCGTBUE171UNQCSDN' of process type 'LOADING' not found in A version
    InfoPackage  no longer exists in object version A in table RSLDPIO
      There many errors of this type.
    How to solve the problem. Please help me.
    Thanks in advance.
    Jaswantha

    Hi Jaswantha,
    Installing Business Content Cube would usually require "Grouping" as "Select In Data Flow Before".
    This is as per my observations so far according to SAP Best Practices.
    Pls. try this and get back.
    Hope it helps
    Regards
    PPMM

  • Error while installing Business Content SD Cubes

    Hello BW Guru's,
    I am installing the business content for the sales overview infocube with the grouping option data flow before  &  later  sometime it says that backgorund programm was been modified.
    I checked it in st22 its showing an dump with the status msg LOAD_PROGRAM_LOST error.
    What could be the problem? how to resolve this issue?
    Please through some inputs on this issue....
    Points Asssured.
    Urs,
    RK.

    Hi,
    The LOAD_PROGRAM_LOST error occurs when there are two
    or more versions of a given program loaded into the buffer at any given time. This happens when the program is changed by one user while it is still in use by another user.
    When a user gets to the program that is having this problem and R/3 attempts to load the generated version from the buffer, it sees that the version is not the most current and tries to swap it out for the most current, but the load was lost from the pxa buffer, hence the dump of LOAD_PROGRAM_LOST.
    To correct the error you need to run tranx SAMT & regenerate the program(s) that are listed in the dump. You can then do a $SYNC in the OK code field in the affected applciation server, but the other application servers should not be running. After the $SYNC, the other app servers can be brought up and the
    buffers should then be in sync.
    Hope this helps,
    Regards
    CSM Reddy

  • How to select the all object at a time while installing business content

    Hi All,
    how to select the all object at a time while installing business content Please let me know if nay document is there
    Thanks Ahmed Pasha

    Hi,
    Please check out the below links
    [Business content Installation|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/102906a4-f13d-2e10-7199-ce316ff254b8?QuickLink=index&overridelayout=true ]
    [BI Content|http://wiki.sdn.sap.com/wiki/display/BI/InstallingBusinessContent]
    Hope it helps.
    Regards,
    AL

  • DSO Activation Error - While Installing BI Content

    HI Friend,
        First, I deleted one sap  source systems  for BW1 ( My bw1 server BI is : BW1CLNT100 ), later ,I create the same sap source system, But active  0FIAP_O03 ods,
    had error:
    DataSource 80FIAP_O03 does not exist in source system BW1CLNT100 of version A     
    Error when creating the export DataSource and dependent Objects     
    Error when activating DataStore Object 0FIAP_O03
    I go to BW1CLNT100  datasoucres ,I not finded 80FIAP_O03  datasoucre, But I goto bw prd BI datasoucre, I found   80FIAP_O03  datasoucre.
    I think loss  80FIAP_O03  datasoucre for BW1CLNT100 source system, because I am't delete Roules on the 0FIAP_O03 infosoucre  for delete sap soucre systems.
    DSO Activation Error - While Installing BI Content
    this problem no issue, So I create new thread.
    Now, How could me create or load 80FIAP_O03  datasoucre for BW1CLNT100 source system?
    Now, I Replicate Datascoure for BW1CLNT100 source system, Delete old datasocure....... I go home, I will try tomorrow .

    Hello,
    You should generate the export data source for  0FIAP_O03 again, if there is still a problem please goto
    RSA1 > SOURCE SYSTEMS > and right click on the relevant source system, find the datamart application component and
    right click on this to replicate the datasource.
    Best Regards,
    Des

  • Error when Installing Business Content BW 3.5

    Hello Everyone,
    When I "Drag n Drop" the infocube 0PS_C021, it shows following errors :
    Object 0EMPLOYEE_EDUCATION (InfoSource,ISTD) could not be collected for object PA-PA-IO (Application,APCO)
    Message no. RSO296
    Diagnosis
    You have collected objects in the BW Metadata Repository. Associated objects for the object PA-PA-IO of type Application,APCO have also been collected. Object 0EMPLOYEE_EDUCATION of type InfoSource,ISTD was among these objects. This object 0EMPLOYEE_EDUCATION of type InfoSource,ISTD, is not, however, available in the Metadata Repository.                                              
    Object '0EMPLOYEE_EDUCATION' (ISTD) of type 'InfoSource' is not available in version 'D'
    Message no. RSO252                                                                               
    Diagnosis                                                                  
    You wanted to generate an object with the name '0EMPLOYEE_EDUCATION' (in transport request ISTD) of type 'InfoSource' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version D. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
    Please help me to solve these problems.
    Regards
    Sanjiv

    Hi Sanjiv,
    Check the below thread:
    Error when Installing Business Content BW 3.5
    http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fbabd936493ee7e10000000a1553f7/content.htm
    Reg
    Pra

  • Source System Assignment  while Installing Business Content

    Hi,
      I have a new R/3 source system in BW (one R/3 system already exists). When I'm installing business content for say an Infosource and before, even with a succesful install , the new source system assignment is not taking place in the infosource and neither are the packages (for the new source system) being installed. The datasource (for the new source system) remains unassigned.
    Please Advice
    Thanks

    Hi Shurobhi
    with your new R/3 source system are you able to see the datasources - using right clik on source system & then select datasources overview. IF not then you need to check if the source system connection is done with metadata repository replication or not. If that is also done then ensure that you have installed all business content datasources using RSA5 in your R/3 system.
    On BW side, while installing transfer rules and infopackages, make sure that this new R/3 source system is checked on in source system Box - X icon on business content screen. Then only you would be able to see transfer rules and infopackages & install them.
    Hope this helps
    Regards
    Pradip

  • Error while activating Business Content

    Hi!
    I'm trying to activating a BC ODS.. but when I run the installation simulation I get the following error message:
    "InfoObject 0KN_USE is not available in version A"
    I've marked the infoobject 0KN_USE to be installed..
    Any ideas of how to proceed?
    BR
    Bjørn

    Maybe that infoobject existed before in inactive version, check it and activate manually, after that activate business content version

  • Error in Installing Business Content

    Hi All,
    I need to Install SD cube : 0SD_C03 through Business content.  Before doing this, In ECC I have activated the relevant SD datasource : 2LIS_11_VADHR in RSA5 and then activated the same datasource in LBWE also. Then deleted the setup tables in LBWG. Coming to BI , I have replicated the datasource .
    In Business content tab , I have set Grouping Option as Only necessary Objects , and Collection Mode as automatically and selected the Cube : 0SD_C03 through Object Type in Business Content tab. Clicked on INSTALL option . I am getting many errors like :
    Activation of Objects with Type InfoObject
        Checking InfoObject 0MATERIAL
           Attribute 0RT_SEAROLL from characteristic 0MATERIAL not (actively) available
           Hierarchy characteristic 0CM_CDT1 of characteristic 0MATERIAL is not active
    Like this I am getting 0VENDOR,0PLANT , 0CM_CTAR, 0CM_CDT1...infoobjects not actively available. I have tried Installing individual Infoject , still it is failing with same Issues.
    Also I have tried Installing the cube with all the Options in Grouping Objects , Still I am facing the errors.
    Please do the needful
    Regards,
    Mahesh

    Hello, please help post solution to this issue. Im having same exact symptom.
    Attribute 0BPARTNER from characteristic 0CUSTOMER not (actively) available. This is a completely new install.
    best regards,
    alfonso
    |Characteristic 0CUSTOMER: Enter description of navigation attribute 0DBHQDUNS             |    |
    |    |Attribute 0BPARTNER from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DB87SIC1 from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBAREACOD from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBCTRYCOD from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBCTYNAM from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBCUSTAT from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBDISTRCOD from characteristic 0CUSTOMER not (actively) available              |    |
    |    |Attribute 0DBEMPBND from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBGUDUNS from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBHQDUNS from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBLGLSTAT from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBLOCACOD from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBREGCOD from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBSALBND from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBSECTCOD from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBYRSBND from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DB_MAKTCOD from characteristic 0CUSTOMER not (actively) available              |    |
    |    |Attribute 0DB_MATCDS from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0BPARTNER from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DB87SIC1 from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBANSALES from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBAREACOD from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBCTRYCOD from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBCTYNAM from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBCUSTAT from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBDISTRCOD from characteristic 0CUSTOMER not (actively) available              |    |
    |    |Attribute 0DBEMPBND from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBEMPTOT from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBGUDUNS from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBHQDUNS from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBLGLSTAT from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBLOCACOD from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBREGCOD from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBSALBND from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBSECTCOD from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBYRSBND from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBYRSTD from characteristic 0CUSTOMER not (actively) available                 |    |
    |    |Attribute 0DB_MAKTCOD from characteristic 0CUSTOMER not (actively) available              |    |
    |    |Attribute 0DB_MATCDS from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBTRDSTYL from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBADDRES1 from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBADDRES2 from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBCTRYNA from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBSTPRCOD from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBPOSTCOD from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBNATID from characteristic 0CUSTOMER not (actively) available                 |    |
    |    |Attribute 0DBNATIDCO from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBTELPHON from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBCEONAME from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBLNOFBUS from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBANSLUS from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBCURNCCO from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBEMPHERE from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBSUBCODE from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBHQNAME from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBHQCTYNM from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBHQSTPR from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBHQCTRYN from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBULDUNS from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBULNAME from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBULCTYNM from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBGUCTRYN from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBGUCTRYC from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBGUNAME from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBNUMFAM from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBHIERCO from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBFAMUPDT from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBBUSNAME from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DB_MATCH from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Checking InfoObject 0DBDUNS_NUM                                              

  • Error while installing BI Content-2lis_13_vdkon

    Hi, Guru's
        i have instaled the infosource (2LIS_13_VDKON) (BI 7).Now when i try to assign the  respective Datasource to the above Infosource,i get a error messg stating : The Transfer Structure is not getting generated.so i tried again to install the DS from business content and here i get a messg:( Data element for InfoObject VBELN        0BILL_NUM could not be created).
    any inputs would be appreciated.
    thanks
    mohan
    (would assign points for sure)

    Hi Mohan,
                     Go by the below procedure.
    Step-1.  Go to transaction RSA-6 and check weather your data source is Active  or not.If it is active  that is fine otherwise activate it in RSA5.
    Step-2. Goto your BW System and replicate the data source and assign the respective infosource.
    Step-3. Now Create Transfer rules then update rules for your respective target.
    Step-4. Schedule an Infopackage to pull the data to the target.
    Hope this helps
    Regards, 
    Karthik.
    mail me at: [email protected]
    Assign points if helpful

  • Errors when installing business content

    hi gurus,
    when i am trying to install cube 0fiap_c03 i am facing these errors.i trying in simultion mode
    the errors r
    1.Object DataStore Object 0FIAP_O03: Merge with the Content Version
    InfoObject 0FI_DSBITEM is not available in version A
    2.Installation (simulation mode) of: InfoCube (CUBE)
    InfoObject 0CLEAR_DATE is not available in active version
    like this it is giving 32 objetswhich r not available in content version
    3.Key figure 0GLACCEXT is not available in version D
    Error while reading InfoProvider 0FIAP_O03
    how to sort this out.
    thanks
    sridhar

    Dear Sri
    I hope You have selected the option "Data Flow Before".
    I used to get these errors and I just ignored it.
    If at the time of extraction if you find any problem then you have to go to SAP site and you can find the correct Content.
    Try to activate the Transfer Rules and Update Rules and if you find any problem then you can look back.
    Regs
    Gopi.
    Message was edited by: Gopi
    Message was edited by: Gopi

  • CL_RSBK_DTP----CP Error while installing BI content

    Hi,
    iam doing BW(740 SP4) content installation and i select Dataflow before and transferred selection ,after some time it is throwing CL_RSBK_DTP------>CP error .
    i searched all earlier documents but of no clue. Pls help us.
    Thanks in advance,
    Phani

    Hi,
    If i choose only necessary objects then iam not  getting any issue. But i need Dataflow before which covers  transformations and DTP's. and this  error is showing while  doing transfer selections itself hence iam not able to select install methods.
    i checked in ST22 but not able to get it and  iam not sure , is there any problem with 7.4 .
    Pls let me know if u find any solution to it.
    Thanks,
    Phani

  • Error while installing BI content

    We are trying to reinstall BI content for 0sd_o01 in dev and transport again to Quality due to some issues.
    While doing that we get errors like '0ACT_DL_DTE is not available in version D' and many such info objects and transformations not in D version.
    What exactly does it mean and how to resolve it.

    Hi lavanya,
    Make sure the info object 0ACT_DL_DTE is active.
    And also check for the info objects are active or not.
    You can check for the info objects that are present in the infocube are active or not using the below table.
    RSDCUBEIOBJ -Objects per InfoCube (where-used list)
    enter the Infocube name and select version =A
    After activating all hte inactive objects try to reinstall the content.
    Regards
    KP

  • Source system not Active error while installing BI content cube

    Hi.,
      When I try to install the BI content cube, In logs it is showing the error message as "Source client not Active". I activated the source system in modelling tab. Still the problem continues.  In source system assignment of BI content the source client is also checked. Please give me a solution.

    Hi Selva,
    If you want to select only infocube, select "Only necessary objects" in grouping. If you want everything related to Info cube, then system will collect data source also and for that it will check if you are authorized in source system. Please check if the source system is connected to BI or you can do one thing activate the data source in source system and replicate it in BI.
    Regards,
    Kams

Maybe you are looking for

  • Can I view my exchange server appointments with ical / mobile me?

    Apologies if this is a rookie question.... I have a work exchange account set up on my iphone 4 (they won't let me connect my mac to the exchange server) and would like to sync my exchange calendar with ical or mobile me. Can this be done without hoo

  • Creation of view and use it as internal table

    dear community,                My questions is taht i am write a select quary in that data is very huge so that it cant inserted in to internal table(memory size of internal table) so i thing that i create aview same as data base table and when write

  • What are the sign-in settings for Jabber?

    Firstly, I do not have a business account with Cisco. We have downloaded the desktop Jabber program. I have now registered an account with Jabber and an account with Cisco. When I open Jabber Video on the desktop, it asks for a username. What is the

  • Alternate material, alternate vendor handling in MRP run

    Could you please guide for  the following : 1) Alternate materials setting/handling for MRP run. 2) Alternate Vendor setting/handling for MRP run. 3) Handling of sub contacting for MRP run. Edited by: laroia on Sep 22, 2011 10:11 AM

  • Oracle Discover and Oracle HRMS R12

    Oracle discoverer have the ability to work with oracle R12 to get quick report, and how I can load my worksheet in oracle R12 any body can guide me, or have the tutorial regarding this topic Thanks in Advance