Error while installing certificate in STRUST
Hi All,
when i try to install the Web Ui Certificates in STRUST i am getting the message mentioned below.
Cannot analyze certificate
Message no. TRUST009
Diagnosis
The certificate cannot be analyzed in the specified file format.
Thanks in Advance,
Regards,
Satish
Hi,
The error clearly indicates the problem of incompatible formats of certificate being imported.
In addition to Nico's reply,
Pls check the format format of the certificates to be compatible in base 64 or binary formats.
If you are not sure, pls get your system admin to get the file converted in above formats.
Cheers Sam
Similar Messages
-
Error while install certificate
Hi,
i receive an error while uploading an certificate.
HTTP Status 500 - Request processing failed; nested exception is org.springframework.web.multipart.MaxUploadSizeExceededException: Maximum upload size of 10240 bytes exceeded; nested exception is org.apache.commons.fileupload.FileUploadBase$SizeLimitExceededException: the request was rejected because its size (10401) exceeds the configured maximum (10240)
Does someone know how to change the upload size?
Thanks
Frankwhich product and version is giving this problem . did you try to use vCenter certificate automation tool Introducing the vCenter Certificate Automation Tool 1.0 | VMware Support Insider - VMware Blogs
-
Error while installing the named instance SQL 2012 Sp1
Hi,
I am getting below error while installing the named instance with features Data base engine. on same server box 2 named instance already installed and working...please suggest. i have done a lot of troubleshooting..(configure local system for Db engines
during installation, tried to install after another domain ID., repair and uninstalled existing and retried.) .. please s if i need to do anything else to resolve the issue.. installation account is domain admin account...
Can i rename the installation domain account profile from sql server that used for 2 named instance and for 3 rd named instance i am trying... is any impact after profile rename from the local sql server on any instance already configured...
Shailendra Devthanks alberto.
here is
2015-03-24 19:48:49.42 Server Microsoft SQL Server 2012 (SP1) - 11.0.3000.0 (X64)
Oct 19 2012 13:38:57
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
2015-03-24 19:48:49.42 Server (c) Microsoft Corporation.
2015-03-24 19:48:49.42 Server All rights reserved.
2015-03-24 19:48:49.42 Server Server process ID is 3460.
2015-03-24 19:48:49.42 Server System Manufacturer: 'Xen', System Model: 'HVM domU'.
2015-03-24 19:48:49.42 Server Authentication mode is WINDOWS-ONLY.
2015-03-24 19:48:49.42 Server Logging SQL Server messages in file 'D:\Program Files\Microsoft SQL Server\MSSQL11.SCSMDB\MSSQL\Log\ERRORLOG'.
2015-03-24 19:48:49.42 Server The service account is 'AIRWORKS\scadmin'. This is an informational message; no user action is required.
2015-03-24 19:48:49.42 Server Registry startup parameters:
-d D:\Program Files\Microsoft SQL Server\MSSQL11.SCSMDB\MSSQL\DATA\master.mdf
-e D:\Program Files\Microsoft SQL Server\MSSQL11.SCSMDB\MSSQL\Log\ERRORLOG
-l D:\Program Files\Microsoft SQL Server\MSSQL11.SCSMDB\MSSQL\DATA\mastlog.ldf
2015-03-24 19:48:49.42 Server Command Line Startup Parameters:
-s "SCSMDB"
-m "SqlSetup"
-T 4022
-T 4010
-T 1905
-T 3701
-T 8015
2015-03-24 19:48:49.69 Server SQL Server detected 1 sockets with 1 cores per socket and 2 logical processors per socket, 2 total logical processors; using 2 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2015-03-24 19:48:49.69 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2015-03-24 19:48:49.69 Server Detected 15624 MB of RAM. This is an informational message; no user action is required.
2015-03-24 19:48:49.69 Server Using conventional memory in the memory manager.
2015-03-24 19:48:49.98 Server Perfmon counters for resource governor pools and groups failed to initialize and are disabled.
2015-03-24 19:48:50.01 Server This instance of SQL Server last reported using a process ID of 5124 at 3/24/2015 7:48:48 PM (local) 3/24/2015 2:18:48 PM (UTC). This is an informational message only; no user action is required.
2015-03-24 19:48:50.03 Server Node configuration: node 0: CPU mask: 0x0000000000000003:0 Active CPU mask: 0x0000000000000003:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2015-03-24 19:48:50.07 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2015-03-24 19:48:50.30 Server Database Mirroring Transport is disabled in the endpoint configuration.
2015-03-24 19:48:50.58 spid5s Warning ******************
2015-03-24 19:48:50.65 spid5s SQL Server started in single-user mode. This an informational message only. No user action is required.
2015-03-24 19:48:50.66 spid5s Starting up database 'master'.
2015-03-24 19:48:50.90 spid5s 9 transactions rolled forward in database 'master' (1:0). This is an informational message only. No user action is required.
2015-03-24 19:48:51.04 Server CLR version v4.0.30319 loaded.
2015-03-24 19:48:51.17 spid5s 0 transactions rolled back in database 'master' (1:0). This is an informational message only. No user action is required.
2015-03-24 19:48:51.17 spid5s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2015-03-24 19:48:51.39 Server Software Usage Metrics is enabled.
2015-03-24 19:48:51.81 spid5s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2015-03-24 19:48:51.83 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2015-03-24 19:48:51.86 spid5s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2015-03-24 19:48:52.02 spid5s SQL Trace ID 1 was started by login "sa".
2015-03-24 19:48:52.16 spid5s Server name is 'AWISCDB\SCSMDB'. This is an informational message only. No user action is required.
2015-03-24 19:48:52.35 spid12s The certificate [Cert Hash(sha1) "151C8B90A9A8AF12F5EFAE3439F691E2C01A7355"] was successfully loaded for encryption.
2015-03-24 19:48:52.35 spid12s Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\SCSMDB ].
2015-03-24 19:48:52.40 spid12s Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the trace flag 7806.
This is an informational message only. No user action is required.
2015-03-24 19:48:52.43 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Windows return code: 0x490, state: 16. Failure to register a SPN might cause integrated
authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually registered.
2015-03-24 19:48:52.45 Server SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not be possible until a SPN is registered for the SQL Server service. This is an informational
message. No user action is required.
2015-03-24 19:48:54.03 Server The SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [ MSSQLSvc/AWISCDB.AIRWORKS.IN:SCSMDB ] for the SQL Server service.
2015-03-24 19:48:54.03 spid14s A new instance of the full-text filter daemon host process has been successfully started.
2015-03-24 19:48:54.86 spid6s Starting up database 'mssqlsystemresource'.
2015-03-24 19:48:54.86 spid5s Starting up database 'msdb'.
2015-03-24 19:48:54.87 spid6s The resource database build version is 11.00.3000. This is an informational message only. No user action is required.
2015-03-24 19:48:55.21 spid5s 12 transactions rolled forward in database 'msdb' (4:0). This is an informational message only. No user action is required.
2015-03-24 19:48:55.32 spid5s 0 transactions rolled back in database 'msdb' (4:0). This is an informational message only. No user action is required.
2015-03-24 19:48:55.32 spid6s Starting up database 'model'.
2015-03-24 19:48:55.32 spid5s Recovery is writing a checkpoint in database 'msdb' (4). This is an informational message only. No user action is required.
2015-03-24 19:48:55.72 spid6s Clearing tempdb database.
2015-03-24 19:48:57.22 spid6s Starting up database 'tempdb'.
2015-03-24 19:48:59.04 spid5s Database 'master' is upgrading script 'msdb110_upgrade.sql' from level 184551476 to level 184552376.
2015-03-24 19:48:59.04 spid5s ----------------------------------
2015-03-24 19:48:59.04 spid5s Starting execution of PRE_MSDB.SQL
2015-03-24 19:48:59.04 spid5s ----------------------------------
2015-03-24 19:49:00.23 spid5s Setting database option COMPATIBILITY_LEVEL to 100 for database 'msdb'.
2015-03-24 19:49:00.57 spid5s -----------------------------------------
2015-03-24 19:49:00.57 spid5s Starting execution of PRE_SQLAGENT100.SQL
2015-03-24 19:49:00.57 spid5s -----------------------------------------
2015-03-24 19:49:00.61 spid5s Setting database option COMPATIBILITY_LEVEL to 110 for database 'msdb'.
2015-03-24 19:49:00.73 spid5s Configuration option 'allow updates' changed from 1 to 1. Run the RECONFIGURE statement to install.
2015-03-24 19:49:00.73 spid5s Configuration option 'allow updates' changed from 1 to 1. Run the RECONFIGURE statement to install.
2015-03-24 19:49:01.78 spid5s Attempting to load library 'xpstar.dll' into memory. This is an informational message only. No user action is required.
2015-03-24 19:49:01.79 spid5s Using 'xpstar.dll' version '2011.110.3000' to execute extended stored procedure 'xp_instance_regread'. This is an informational message only; no user action is required.
2015-03-24 19:49:01.80 spid5s DBCC TRACEOFF 1717, server process ID (SPID) 5. This is an informational message only; no user action is required.
2015-03-24 19:49:01.80 spid5s DBCC execution completed. If DBCC printed error messages, contact your system administrator.
2015-03-24 19:49:01.81 spid5s
2015-03-24 19:49:01.81 spid5s Creating table temp_sysjobschedules
2015-03-24 19:49:01.91 spid5s
2015-03-24 19:49:01.91 spid5s Alter table sysdownloadlist...
2015-03-24 19:49:01.92 spid5s
2015-03-24 19:49:01.92 spid5s Alter table sysjobhistory...
2015-03-24 19:49:01.92 spid5s
2015-03-24 19:49:01.92 spid5s Alter table systargetservers...
2015-03-24 19:49:01.92 spid5s
2015-03-24 19:49:01.92 spid5s Alter table sysjobsteps...
2015-03-24 19:49:01.99 spid5s Configuration option 'allow updates' changed from 1 to 0. Run the RECONFIGURE statement to install.
2015-03-24 19:49:01.99 spid5s Configuration option 'allow updates' changed from 1 to 0. Run the RECONFIGURE statement to install.
2015-03-24 19:49:01.99 spid5s
2015-03-24 19:49:01.99 spid5s -----------------------------------------
2015-03-24 19:49:01.99 spid5s Execution of PRE_SQLAGENT100.SQL complete
2015-03-24 19:49:01.99 spid5s -----------------------------------------
2015-03-24 19:49:02.01 spid5s DMF pre-upgrade steps...
2015-03-24 19:49:02.13 spid5s DC pre-upgrade steps...
2015-03-24 19:49:02.13 spid5s Check if Data collector config table exists...
2015-03-24 19:49:02.13 spid5s Data Collector state before upgrade: 0
2015-03-24 19:49:02.13 spid5s pre_dc100::Check if syscollector_collection_sets_internal table exists...
2015-03-24 19:49:02.13 spid5s pre_dc100::Capturing Collection set status in temp table...
2015-03-24 19:49:02.19 spid5s Deleting cached auto-generated T-SQL Data Collection packages from msdb...
2015-03-24 19:49:02.19 spid5s End of DC pre-upgrade steps.
2015-03-24 19:49:02.19 spid5s DAC pre-upgrade steps...
2015-03-24 19:49:02.19 spid5s Starting DAC pre-upgrade steps ...
2015-03-24 19:49:02.19 spid5s End of DAC pre-upgrade steps.
2015-03-24 19:49:02.19 spid5s ----------------------------------
2015-03-24 19:49:02.19 spid5s Starting execution of MSDB.SQL
2015-03-24 19:49:02.19 spid5s ----------------------------------
2015-03-24 19:49:02.23 spid5s Configuration option 'allow updates' changed from 0 to 1. Run the RECONFIGURE statement to install.
2015-03-24 19:49:02.23 spid5s Configuration option 'allow updates' changed from 0 to 1. Run the RECONFIGURE statement to install.
2015-03-24 19:49:02.27 spid5s Checking the size of MSDB...
2015-03-24 19:49:02.53 spid5s
2015-03-24 19:49:02.53 spid5s Setting database option TRUSTWORTHY to ON for database 'msdb'.
2015-03-24 19:49:02.53 spid5s Setting database option RECOVERY to SIMPLE for database 'msdb'.
2015-03-24 19:49:02.64 spid5s ----------------------------------
2015-03-24 19:49:02.64 spid5s Finished execution of MSDB.SQL
2015-03-24 19:49:02.64 spid5s ----------------------------------
2015-03-24 19:49:02.64 spid5s -----------------------------------------
2015-03-24 19:49:02.64 spid5s Starting execution of MSDB_VERSIONING.SQL
2015-03-24 19:49:02.64 spid5s -----------------------------------------
2015-03-24 19:49:02.64 spid5s -----------------------------------------
2015-03-24 19:49:02.64 spid5s Finished execution of MSDB_VERSIONING.SQL
2015-03-24 19:49:02.64 spid5s -----------------------------------------
2015-03-24 19:49:02.64 spid5s Dropping view MSdatatype_mappings...
2015-03-24 19:49:02.65 spid5s Dropping view sysdatatypemappings...
2015-03-24 19:49:02.65 spid5s Dropping table MSdbms_datatype_mapping...
2015-03-24 19:49:02.66 spid5s Dropping table MSdbms_map...
2015-03-24 19:49:02.67 spid5s Dropping table MSdbms_datatype...
2015-03-24 19:49:02.67 spid5s Dropping table MSdbms...
2015-03-24 19:49:02.73 spid5s Creating table MSdbms
2015-03-24 19:49:02.75 spid5s Creating table MSdbms_datatype
2015-03-24 19:49:03.01 spid5s Creating table MSdbms_map
2015-03-24 19:49:03.02 spid5s Creating table MSdbms_datatype_mapping
2015-03-24 19:49:03.03 spid5s Definining default datatype mappings
2015-03-24 19:49:03.04 spid5s Creating datatype mappings for MSSQLSERVER to ORACLE8
2015-03-24 19:49:03.21 spid5s Creating datatype mappings for MSSQLSERVER to ORACLE9
2015-03-24 19:49:03.29 spid5s Creating datatype mappings for MSSQLSERVER to ORACLE10
2015-03-24 19:49:03.37 spid5s Creating datatype mappings for MSSQLSERVER to ORACLE11
2015-03-24 19:49:03.46 spid5s Creating datatype mappings for MSSQLSERVER to DB2
2015-03-24 19:49:03.54 spid5s Creating datatype mappings for MSSQLSERVER to SYBASE
2015-03-24 19:49:03.62 spid5s Creating datatype mappings for ORACLE8 to MSSQLSERVER
2015-03-24 19:49:03.71 spid5s Creating datatype mappings for ORACLE9 to MSSQLSERVER
2015-03-24 19:49:03.83 spid5s Creating datatype mappings for ORACLE10 to MSSQLServer
2015-03-24 19:49:03.95 spid5s Creating datatype mappings for ORACLE11 to MSSQLServer
2015-03-24 19:49:04.08 spid5s Creating view MSdatatype_mappings
2015-03-24 19:49:04.08 spid5s Creating view sysdatatypemappings
2015-03-24 19:49:05.08 spid5s
2015-03-24 19:49:05.08 spid5s Creating table syssubsystems...
2015-03-24 19:49:05.09 spid5s
2015-03-24 19:49:05.09 spid5s Creating view sysproxyloginsubsystem_view...
2015-03-24 19:49:05.11 spid5s
2015-03-24 19:49:05.11 spid5s Creating trigger trig_sysoriginatingservers_delete...
2015-03-24 19:49:05.11 spid5s
2015-03-24 19:49:05.11 spid5s Creating view sysoriginatingservers_view...
2015-03-24 19:49:05.12 spid5s
2015-03-24 19:49:05.12 spid5s Creating trigger trig_sysjobs_insert_update...
2015-03-24 19:49:05.13 spid5s
2015-03-24 19:49:05.13 spid5s Creating view sysjobs_view...
2015-03-24 19:49:05.15 spid5s
2015-03-24 19:49:05.15 spid5s Creating trigger trig_sysschedules_insert_update...
2015-03-24 19:49:05.16 spid5s
2015-03-24 19:49:05.16 spid5s Creating view sysschedules_localserver_view...
2015-03-24 19:49:05.21 spid5s
2015-03-24 19:49:05.21 spid5s Creating view systargetservers_view...
2015-03-24 19:49:05.23 spid5s
2015-03-24 19:49:05.23 spid5s Creating view sysalerts_performance_counters_view...
2015-03-24 19:49:05.25 spid5s
2015-03-24 19:49:05.25 spid5s Creating function SQLAGENT_SUSER_SNAME ...
2015-03-24 19:49:05.25 spid5s
2015-03-24 19:49:05.25 spid5s Creating function SQLAGENT_SUSER_SID ...
2015-03-24 19:49:05.26 spid5s
2015-03-24 19:49:05.26 spid5s Creating procedure SP_SQLAGENT_IS_SRVROLEMEMBER...
2015-03-24 19:49:05.27 spid5s
2015-03-24 19:49:05.27 spid5s Creating procedure sp_verify_category_identifiers...
2015-03-24 19:49:05.27 spid5s
2015-03-24 19:49:05.27 spid5s Creating function agent_datetime...
2015-03-24 19:49:05.27 spid5s
2015-03-24 19:49:05.27 spid5s Creating procedure sp_verify_proxy_identifiers...
2015-03-24 19:49:05.28 spid5s
2015-03-24 19:49:05.28 spid5s Creating procedure sp_verify_credential_identifiers...
2015-03-24 19:49:05.29 spid5s
2015-03-24 19:49:05.29 spid5s Creating procedure sp_verify_subsystems...
2015-03-24 19:49:05.30 spid5s
2015-03-24 19:49:05.30 spid5s Creating procedure sp_verify_subsystem_identifiers...
2015-03-24 19:49:05.30 spid5s
2015-03-24 19:49:05.30 spid5s Creating procedure sp_verify_login_identifiers...
2015-03-24 19:49:05.31 spid5s
2015-03-24 19:49:05.31 spid5s Creating procedure sp_verify_proxy...
2015-03-24 19:49:05.31 spid5s
2015-03-24 19:49:05.31 spid5s Creating procedure sp_add_proxy...
2015-03-24 19:49:05.32 spid5s
2015-03-24 19:49:05.32 spid5s Creating procedure sp_delete_proxy...
2015-03-24 19:49:05.32 spid5s
2015-03-24 19:49:05.32 spid5s Creating procedure sp_update_proxy...
2015-03-24 19:49:05.33 spid5s
2015-03-24 19:49:05.33 spid5s Creating procedure sp_sqlagent_is_member...
2015-03-24 19:49:05.33 spid5s
2015-03-24 19:49:05.33 spid5s Creating procedure sp_verify_proxy_permissions...
2015-03-24 19:49:05.34 spid5s
2015-03-24 19:49:05.34 spid5s Creating procedure sp_help_proxy...
2015-03-24 19:49:05.35 spid5s
2015-03-24 19:49:05.35 spid5s Creating procedure sp_get_proxy_properties...
2015-03-24 19:49:05.36 spid5s
2015-03-24 19:49:05.36 spid5s Creating procedure sp_grant_proxy_to_subsystem...
2015-03-24 19:49:05.36 spid5s
2015-03-24 19:49:05.36 spid5s Creating procedure sp_grant_login_to_proxy...
2015-03-24 19:49:05.37 spid5s
2015-03-24 19:49:05.37 spid5s Creating procedure sp_revoke_login_from_proxy...
2015-03-24 19:49:05.37 spid5s
2015-03-24 19:49:05.37 spid5s Creating procedure sp_revoke_proxy_from_subsystem...
2015-03-24 19:49:05.38 spid5s
2015-03-24 19:49:05.38 spid5s Creating procedure sp_enum_proxy_for_subsystem...
2015-03-24 19:49:05.38 spid5s
2015-03-24 19:49:05.38 spid5s Creating procedure sp_enum_login_for_proxy...
2015-03-24 19:49:05.39 spid5s
2015-03-24 19:49:05.39 spid5s Creating procedure sp_reassign_proxy...
2015-03-24 19:49:05.40 spid5s
2015-03-24 19:49:05.40 spid5s Creating procedure sp_sqlagent_get_startup_info...
2015-03-24 19:49:05.41 spid5s
2015-03-24 19:49:05.41 spid5s Creating procedure sp_sqlagent_update_agent_xps...
2015-03-24 19:49:05.42 spid5s
2015-03-24 19:49:05.42 spid5s Creating procedure sp_sqlagent_has_server_access...
2015-03-24 19:49:05.45 spid5s
2015-03-24 19:49:05.45 spid5s Creating procedure sp_sqlagent_get_perf_counters...
2015-03-24 19:49:05.46 spid5s
2015-03-24 19:49:05.46 spid5s Creating procedure sp_sqlagent_notify...
2015-03-24 19:49:05.47 spid5s
2015-03-24 19:49:05.47 spid5s Creating procedure sp_is_sqlagent_starting...
2015-03-24 19:49:05.47 spid5s
2015-03-24 19:49:05.47 spid5s Creating procedure sp_verify_job_identifiers...
2015-03-24 19:49:05.48 spid5s
2015-03-24 19:49:05.48 spid5s Creating procedure sp_verify_schedule_identifiers...
2015-03-24 19:49:05.49 spid5s
2015-03-24 19:49:05.49 spid5s Creating procedure sp_verify_jobproc_caller...
2015-03-24 19:49:05.50 spid5s
2015-03-24 19:49:05.50 spid5s Creating procedure sp_downloaded_row_limiter...
2015-03-24 19:49:05.51 spid5s
2015-03-24 19:49:05.51 spid5s Creating procedure sp_post_msx_operation...
2015-03-24 19:49:05.54 spid5s
2015-03-24 19:49:05.54 spid5s Creating procedure sp_verify_performance_condition...
2015-03-24 19:49:05.58 spid5s
2015-03-24 19:49:05.58 spid5s Creating procedure sp_verify_job_date...
2015-03-24 19:49:05.59 spid5s
2015-03-24 19:49:05.59 spid5s Creating procedure sp_verify_job_time...
2015-03-24 19:49:05.61 spid5s
2015-03-24 19:49:05.61 spid5s Creating procedure sp_verify_alert...
2015-03-24 19:49:05.62 spid5s
2015-03-24 19:49:05.62 spid5s Creating procedure sp_update_alert...
2015-03-24 19:49:05.63 spid5s
2015-03-24 19:49:05.63 spid5s Creating procedure sp_delete_job_references...
2015-03-24 19:49:05.65 spid5s
2015-03-24 19:49:05.65 spid5s Creating procedure sp_delete_all_msx_jobs...
2015-03-24 19:49:05.66 spid5s
2015-03-24 19:49:05.66 spid5s Creating procedure sp_generate_target_server_job_assignment_sql...
2015-03-24 19:49:05.66 spid5s
2015-03-24 19:49:05.66 spid5s Creating procedure sp_generate_server_description...
2015-03-24 19:49:05.67 spid5s
2015-03-24 19:49:05.67 spid5s Creating procedure sp_msx_set_account...
2015-03-24 19:49:05.68 spid5s
2015-03-24 19:49:05.68 spid5s Creating procedure sp_msx_get_account...
2015-03-24 19:49:05.69 spid5s
2015-03-24 19:49:05.69 spid5s Creating procedure sp_delete_operator...
2015-03-24 19:49:05.70 spid5s
2015-03-24 19:49:05.70 spid5s Creating procedure sp_msx_defect...
2015-03-24 19:49:05.71 spid5s
2015-03-24 19:49:05.71 spid5s Creating procedure sp_msx_enlist...
2015-03-24 19:49:05.72 spid5s
2015-03-24 19:49:05.72 spid5s Creating procedure sp_delete_targetserver...
2015-03-24 19:49:05.73 spid5s
2015-03-24 19:49:05.73 spid5s Creating procedure sp_enlist_tsx
2015-03-24 19:49:05.74 spid5s
2015-03-24 19:49:05.74 spid5s Creating procedure sp_get_sqlagent_properties...
2015-03-24 19:49:05.76 spid5s
2015-03-24 19:49:05.76 spid5s Create procedure sp_set_sqlagent_properties...
2015-03-24 19:49:05.76 spid5s
2015-03-24 19:49:05.76 spid5s Creating procedure sp_add_targetservergroup...
2015-03-24 19:49:05.77 spid5s
2015-03-24 19:49:05.77 spid5s Creating procedure sp_update_targetservergroup...
2015-03-24 19:49:05.78 spid5s
2015-03-24 19:49:05.78 spid5s Creating procedure sp_delete_targetservergroup...
2015-03-24 19:49:05.78 spid5s
2015-03-24 19:49:05.78 spid5s Creating procedure sp_help_targetservergroup...
2015-03-24 19:49:05.79 spid5s
2015-03-24 19:49:05.79 spid5s Creating procedure sp_add_targetsvgrp_member...
2015-03-24 19:49:05.80 spid5s
2015-03-24 19:49:05.80 spid5s Creating procedure sp_delete_targetsvrgrp_member...
2015-03-24 19:49:05.81 spid5s
2015-03-24 19:49:05.81 spid5s Creating procedure sp_verify_category...
2015-03-24 19:49:05.81 spid5s
2015-03-24 19:49:05.81 spid5s Creating procedure sp_add_category...
2015-03-24 19:49:05.82 spid5s
2015-03-24 19:49:05.82 spid5s Creating procedure sp_update_category...
2015-03-24 19:49:05.83 spid5s
2015-03-24 19:49:05.83 spid5s Creating procedure sp_delete_category...
2015-03-24 19:49:05.83 spid5s
2015-03-24 19:49:05.84 spid5s Creating procedure sp_help_category...
2015-03-24 19:49:05.84 spid5s
2015-03-24 19:49:05.84 spid5s Creating procedure sp_help_targetserver...
2015-03-24 19:49:05.85 spid5s
2015-03-24 19:49:05.85 spid5s Creating procedure sp_resync_targetserver...
2015-03-24 19:49:06.06 spid5s
2015-03-24 19:49:06.06 spid5s Creating procedure sp_purge_jobhistory...
2015-03-24 19:49:06.09 spid5s
2015-03-24 19:49:06.09 spid5s Creating procedure sp_help_jobhistory...
2015-03-24 19:49:06.10 spid5s
2015-03-24 19:49:06.10 spid5s Creating procedure sp_add_jobserver...
2015-03-24 19:49:06.11 spid5s
2015-03-24 19:49:06.11 spid5s Creating procedure sp_delete_jobserver...
2015-03-24 19:49:06.11 spid5s Error: 10011, Severity: 16, State: 1.
2015-03-24 19:49:06.11 spid5s Access denied.
2015-03-24 19:49:06.11 spid5s Error: 917, Severity: 15, State: 1.
2015-03-24 19:49:06.11 spid5s An upgrade script batch failed to execute for database 'master' due to compilation error. Check the previous error message for the line which caused compilation to fail.
2015-03-24 19:49:06.11 spid5s Error: 912, Severity: 21, State: 2.
2015-03-24 19:49:06.11 spid5s Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 917, state 1, severity 15. This is a serious error condition which might interfere with regular
operation and the database will be taken offline. If the error happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective
actions and re-start the database so that the script upgrade steps run to completion.
2015-03-24 19:49:06.11 spid5s Error: 3417, Severity: 21, State: 3.
2015-03-24 19:49:06.11 spid5s Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup, repair it, or rebuild it. For more information about how to rebuild the master database, see SQL Server Books
Online.
2015-03-24 19:49:06.12 spid5s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
2015-03-24 19:49:06.50 spid12s The SQL Server Network Interface library successfully deregistered the Service Principal Name (SPN) [ MSSQLSvc/AWISCDB.AIRWORKS.IN:SCSMDB ] for the SQL Server service.
Shailendra Dev -
Error while installing OWB
after 50% install.. it says
"Error in writing to file c:\oracle\ora9201\bin\oci.dll
The process cannot access the file because it is being used by another process"
Apparently I have restarted the workstation and closed all oracle related services in services and no other program is running expect the installer.
Can any one help in resolving the issue. Or can I hit the ignore button and continue installing?Always install OWB into a new ORACLE_HOME unless the Installation and Configuration Guide states otherwise. This has only happened twice. OWB 9.0.2.62.3 was the last version to allow installation into an existing ORACLE_HOME. Another thing you can do is go to www.sysinternals.com and download the utility LISTDLLs. It is great. From a command prompt, start it with the syntax: listdlls >log.txt
This will output the DLLs in use and which executable is using it. Search for the DLL in the log.txt and scroll up until the double line. The executable name locking the DLL will be above the double line. If you have the Microsoft Distributed Transaction Coordinator Service running on the client, it will lock Oracle DLLs. This has been a common issue in the past, going back to the days of Data Mart Suite. This was documented in the Release Notes for it and may still be in the system in a note somewhere. It is in: DMS: Unable To Install; Filesopen/Service Running On Compaq Server Doc ID: Note:1080977.6 and Certain Files which need to be Reinstalled are Being Used Doc ID: Note:117672.1
The first note I wrote back before 2000.
Barry -
Error while installing Oracle 10g on Fedora Core 1
Error while installing Oracle 10g on Fedora Core 1. After 40% of the Installation is thru, the progress bar is showing 40%, it gives error "Not connected to Oracle" and the installation has to be terminated.
We have tried by using the on-line procedure and changing the required script to make believe it as said.Are you createing DB also???
-
Error while installing SQL Server 2012 X64 SP2,
Error while installing SQL Server 2012 X64 SP2,
When I installed the SQL Server 2012 X64 SP1, I got the attached error.
What might be the issue here?
Thank you
Best
JamalHello,
Are you trying to install SQL Server on a compressed or encrypted drive? SQL Server won’t install on a drive/folder with these attributes.
Are you trying to install SQL Server on a ReFS file system? It is not supported on SQL Server 2012.
Disable any security/antivirus software and download the media again. Mount the media (.ISO file) and try to install again.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Error while installing the NerWeaver Platform
Error While installing the NetWeaver Instance
Posted: Nov 22, 2004 2:37 PM Reply E-mail this post
When I am installing 'SAP NetWeaver Suite'the below error came, can someone help me out on this below error?
MOS-01011 'C:\usr\sap\BWI\SYS\exe\run/sapstartsrv.exe' returned with '-1'.
The J2EE server is up unrunning @ the installing the Netweaver ABAP Instance I got this error.
For the user BWI it has the Administrator previlages i checked so many time but I am unable to get it.
Please help me out the error.Hi George,
Kindly use the latest installation Masted in Service market place. That will possibly solve your problem.
Regards
Vivek -
Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
bash-3.00$ ./irca.sh
Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
(c) Copyright 2006 Oracle Corporation. All rights reserved.
ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
Please verify that the ORACLE_HOME is set correctly.
bash-3.00$Hi Craig,
Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
Section :- Oracle Application Server 10g Release 3 (10.1.3)
Regards,
Praaksh. -
Error while installing gateway please help soon
Error while installing gateway in
Microsoft Windows Server 2003.
error while installing gateway
E:\idm\gateway>gateway -i
10/02/2008 15.13.38.015000 [4972] (../../../../src/wps/agent/logging/WSTrace.cpp
,150): trace active, level: 4, file: E:\\IDMLOGS\\gateway.log, maxSize: 10240 KB
10/02/2008 15.13.38.015000 [4972] (../../../../src/wps/agent/logging/WSTrace.cpp
,108): In WSTrace::init()
10/02/2008 15.13.38.015000 [4972] (../../../../src/wps/agent/logging/WSTrace.cpp
,109): Gateway version: 'Sun Java System Identity Manager 7.1'
10/02/2008 15.13.38.015000 [4972] (../../../../src/wps/agent/logging/WSTrace.cpp
,110): OS version: 'Windows Server 2003 Family Service Pack 1 (Build 3790)'
An error occured when trying to install the service: No error
E:\idm\gateway>Use that MS installer cleanup to get rid of iTunes first, then QuickTime.
Actually, I should back up. Go to the article I link below, and scroll down to the section
*General Installation Troubleshooting*
Important: A majority of customers experience successful iTunes installation after completing these troubleshooting procedures. If one does not help, proceed to the next.
-Completely Remove iTunes and QuickTime (Click to show)
-Empty your Temp directory and restart (Click for more)
-Clean up iTunes installer files on the computer (Click for more)
-Download QuickTime Standalone Installer (Click for more)
-Disable other conflicting software (Click for more)
-Make sure your folder names don't contain strange characters (Click for more)
http://docs.info.apple.com/article.html?artnum=93976 -
Error while installing J2EE Add- In to the ABAP system
Error while installing J2EE Add-In to the ABAP system
We are installing J2EE Add-In to the ECC5 System in the new hardware.
When are getting Error while installing J2EE Add-In to the ABAP system.
Transaction Begin*****************************
ERROR 2005-08-10 14:58:28
CJSlibModule::writeLogEntry()
CJS-20011 J2EE engine configuration error. DIAGNOSIS: Error when
configuring J2EE Engine. See output of
logfile /usr/sap/QSS/install/batchconfig.log: 'My Library Path
is: /usr/j2se/jre/lib/sparcv9/server:/usr/j2se/jre/lib/sparcv9:/usr/j2se/jre/../lib/sparcv9:/tmp/sapinst_exe.13084.1123702275:/usr/lib::/usr/openwin/lib:/usr/sap/QSS/SYS/exe/run:/oracle/QSS/920_64/lib:/oracle/QSS/920_64/lib32:/usr/lib
ElementInfoTask has finished successfully on dispatcher
ConsoleLogsTask has finished successfully on dispatcher
ChangeManagerPropsTask has finished successfully. Manager:
LockingManager on dispatcher
ChangeManagerPropsTask has finished successfully. Manager:
ClusterManager on dispatcher
ElementInfoTask has finished successfully on server
ConsoleLogsTask has finished successfully on server
ChangeManagerPropsTask has finished successfully. Manager:
LockingManager on server
ChangeManagerPropsTask has finished successfully. Manager:
ClusterManager on server
ChangeServicePropsTask has finished successfully. Service: dbpool on
server
ChangePasswordsTask finished successfully.
Error occured while connecting to database (UploadFile). Msg: No such
algorithm: DESede
Transaction end***********************************
We tried twice clean installation, after removing j2ee dir, SCS and
resp profiles and droping PSAPQSSDB tablespace and SAPQSSDB user.
I have also confirmed the passwords in ABAP system/000 for SAPJSF, DDIC, J2EE_ADMIN, J2EE_GUEST.
We are getting the same error in both tries.
Kindly advice us to resolve the problem.
Thanks and Regards,
SrinivasAnanda,
you saved my day! I've been banging my head against the wall with this same problem during a J2EE add-in installation for SRM 4.0 on Windows, in preparation of an LAC 2.0 installation. I had tried deleting the schema first, but that didn't work. After I removed the sys\global\security folder as well, it worked perfectly.
Thank you. -
"The instillation process has encountered an error while installing shared technologies."
Basically, when ever I attempt download Adobe Premiere Elements 11 on my Windows Vista computer, half way through a message pops up saying "The instillation process has encountered an error while installing shared technologies. Please restart your system and try again."
Each time I insert the disc, I select trial version, in case I download the full version and it no longer lets me use my serial code.
Some one said the destination folder couldn't contain more then 250 characters, so I changed its location from 'C:\Program Files\Adobe\' to 'C:\' but it still came up with the same message!
I have downloaded the new Adobe Reader 10, but this makes no difference to the process.. no matter what I've tried it always comes up with the same message.
I also turn of my anti-virus software when installing Adobe Premiere Elements. Still this doesn't do the trick. And I've restarted my computer and tried downloading it and un-downloading it multiple times!
Every time the same message comes up, and I have no idea how to fix it... Its defiantly not my memory that is a problem, as I currently have 50GB free on my OS C:\ drive.
I also have QuickTime version 7.6.9, which is apparently needed?
If you know something I haven't tried that may work, or the problem causing this and a solution to the problem, please can you notify me, Thanks!Refer to this:
Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows
Mylenium -
Error while Installing Oracle Services for Microsoft Transaction Server
I downloaded "Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP" and installed the personal edition. It did not install successfully and gave this error message:
Error while Installing Oracle Services for Microsoft Transaction Server
The specified key was not found while trying to GetValue
- stop installation of all products.
- stop installation of this component only.
The installation of Oracle 9i Database was unsuccessful
The Integration tools and client installed just fine from the same download. Why didn't the database install successfully? All the other components seemed to install just fine and the database appeared to be created - but I could not open it and there was not start menu option for DBA Studio.
I am running Windows 2000 professional with Service Pack 3 on a 2 GHz Pentium4 machine with 512MB Rambus RAM, 32bit color graphics ATI All-in-Wonder card, about 40GB of disk space, a local peer-to-peer network via cat5 cable to another Win2k P3 machine, and Creative Soundblaster Audigy card. Do I need to adjust any network settings? Would it help or hinder if I installed MS IIS? WinNT has a Microsoft Transaction Server (MTS) but Win2k has COM+ instead; does that make a difference in terms of the installer looking for MTS? Do I need to configure COM+ in some special way / change settings?HI Salman,
I am doing the following.
1. I am installing Oracle 10.2.01 Database(Not Client) on my windows Xp laptop. While installation i Choose the custom option and Check the Oracle Windows Interface. In that i check the "Install Oracle Services for Microsoft Transaction server" checkbox. The installation goes on fine till 99% and when it tries to install the
Oracle Services for Microsoft Transaction server it gives an error saying that "Microsoft Transaction server" was not found on the system.
I had previously installed the same on my laptop and it was working fine. but after uninstallation when i try to re install i get this problem.
If i go to the services.msc option in windows i still see the OracleMTSRecoveryService option even when i have uninstalled oracle. But when i try to start the services i get the following error
Could Not start the OracleMTSRecoveryService on the local computer.
Error 3: The system cannot find the file specified.
Any help on how to resolve this issue will be highly appreciated -
Getting an Error while installing Microsoft Visual Studio 2013
Hi team
I am getting an error while installing Microsoft Visual Studio 2013
PFB error : this version of visual studio requires a computer with a never version of windows
P.S. I am having Windows 7 64 bit processor , van you please advise ASAPHi Kanchan Gandhi,
A similar issue is addressed here, hope it’s helpful.
http://social.msdn.microsoft.com/Forums/vstudio/en-US/127869c4-7e00-450d-b7fc-1b3cd11ebf07/this-version-of-visual-studio-requires-a-computer-with-a-newer-version-of-windows?forum=vssetup
This is system requirement of Visual Studio 2013:
http://www.visualstudio.com/products/visual-studio-2013-compatibility-vs
If there is anything I can do for you regarding this issue, feel free to post back.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
SETUP ERROR WHILE INSTALLING SQL SERVER 2008 R2
Hi ,
I'm coming across the following error while installing Microsoft SQL Server 2008R2
SQL Server Setup has encountered the following error:
The required MSI package 'D:\SQL Sever 2008 R2 Developer Edition\x86\setup\sql_engine_core_shared_msi\sql_engine_core_shared.msi' doesn't exist.
Error code 0x84B20001.
I tried reinstalling the same. But results the same.
Please suggest. :)Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068709375
Exit facility code: 1202
Exit error code: 1
Exit message: The required MSI package 'D:\softwares\SQL Sever 2008 R2 Developer Edition\x86\setup\sql_engine_core_shared_msi\sql_engine_core_shared.msi'
doesn't exist.
Start time: 2013-12-31 20:47:50
End time: 2013-12-31 20:55:44
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131231_204629\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.1600.1%26EvtType%3d0xD2FD83B3%400xC2B0B50B%401202%401
Machine Properties:
Machine name: SAMPLE-PC
Machine processor count: 2
OS version: Windows 7
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2005
Tools 1033
Express Edition 9.2.3042 No
Sql Server 2005
ToolsClient 1033
Express Edition 9.2.3042 No
Sql Server 2005
ToolsClient\Connectivity 1033 Express Edition
9.2.3042 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services
1033 Express Edition 10.1.2531.0 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication
1033 Express Edition 10.1.2531.0 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: D:\softwares\SQL Sever 2008 R2 Developer Edition\x86\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: TEST
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: TEST
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: SAMPLE-PC\SAMPLE
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131231_204629\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: TEST
INSTANCENAME: TEST
ISSVCACCOUNT: TEST
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: SAMPLE-PC\TEST
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: TEST
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: SAMPLE-PC\SAMPLE
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131231_204629\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Analysis Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Integration Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131231_204629\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.ChainerInvalidOperationException
Message:
The required MSI package 'D:\softwares\SQL Sever 2008 R2 Developer Edition\x86\setup\sql_engine_core_shared_msi\sql_engine_core_shared.msi' doesn't exist.
Data:
ChainerInvalidOperationExceptionData = InstallPackage
DisableWatson = true
Stack:
at Microsoft.SqlServer.Configuration.SetupExtension.MsiInstallEngineActionBehavior.ModifyAction(String installedProductCode, String installedProductVersion, String pathOfPackageOnMedia, InstallAction pkgAction)
at Microsoft.SqlServer.Configuration.SetupExtension.MSIInstallerEngine.InstallPackage(PackageId pkg, InstallAction pkgAction)
at Microsoft.SqlServer.Configuration.MsiExtension.PackageInstallAction.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun) -
Getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit
Hi,
I am getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit. I have already tried all option but fail to installation
an error during the installation of assembly micro soft.vc80.crtHi,
I am getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit. I have already tried all option but fail to installation
an error during the installation of assembly micro soft.vc80.crt
Can you please post summary.txt file here.Below link will help you in finding it.
http://technet.microsoft.com/en-us/library/ms143702(v=sql.105).aspx
Also with error you posted I guess it is a known issue .You need to install below package and then continue with fresh installation
http://www.microsoft.com/en-gb/download/details.aspx?id=15336
Please make sure before beginning fresh installation you make sure previous failed installation is removed completely.Use add remove program to remove failed SQL Server.If yu still face issue please post summary.txt file here
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
Maybe you are looking for
-
Autoscrolling stopped working in Firefox 3.6.28 for Mac OS 10.4
I have two Mac G4 desktop computers and have always had autoscrolling Firefox. Now the feature is no longer working. I don't recall updating Firefox recently, but can't go beyond my current version, 3.6.28 because the machines are not Intel. The auto
-
On a Weblogic7 server I am trying to create an InitialContext to a Weblogic6 server and set the SECURITY_CREDENTIALS. The code is something like this: Hashtable p = new Hashtable(); p.put(Context.INITIAL_CONTEXT_FACTORY, "weblogic.jndi.WLInitialConte
-
Ringtones how do u find them ???
Please can someone tell if i am going mad !! have been though all the support with apple, and i cannot see ring-tone symbols in my iTunes for love nor money, but when you look on the support for this item, it says click on view and go to view options
-
HELP: Issue on debugging
Hi all, I have a flex app that loads a module. And I am trying to debug the code on the module but the breakpoints that I set were being ignored (I made sure I don't have "Skip the Breakpoints" checked). And when it stop on an error on one of the fun
-
Iphone usb cable shuts down laptop with error any ideas why
every time i unplug the iphone usb cable it shuts down laptop with an error,i'm running windows7 on laptop and get a blue screen error.