Error while installing forms 4.5 client w32prd.tmp not found
can someone tell me about w32prd.tmp file.I copied it to the setup folder from forms 5.0 installtion cd. machine is on windows NT 4.0.
You need to install them in 2 different Oracle_homes.
Is there any specific reason that you use such old versions? Isn't it time you get up to speed with some more updated version?
Similar Messages
-
Error in installing windows 2008 r2 sp 1 element not found
error in installing windows 2008 r2 sp 1 element not found
Hi,
As Akash G says, would you please let us know the complete error message or provide a screenshot? It will help
us to go further.
In addition, would you please let me confirm whether install the Windows Server 2008 R2 Service Pack 1 via
Windows Update, or download the installation package and then install manually?
Please refer to the following article and check if can help you to solve this issue.
The error 0X80070490(Element not found) when you are installing a service pack or update
http://blogs.technet.com/b/asiasupp/archive/2011/06/20/the-error-0x80070490-element-not-found-when-you-are-installing-a-service-pack-or-update.aspx
By the way, you can also install the Service Pack 1 in
Clean Boot mode manually. Then please check if install successfully.
Hope this helps.
Best regards,
Justin Gu -
Hi all!
In configuration stage of installation time it's showing following error.
1. http://img69.imageshack.us/img69/9789/error1ah.png
2. http://img195.imageshack.us/img195/4789/error2kx.png
please help someone.yes, the log files error like below
opmnctl start: failed.
Can not resolve ABCDUSER-PC for interface any
java.lang.Exception: oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.install.classic.ca.standard.InstanceProvisioningTask.doExecute(InstanceProvisioningTask.java:222)
at oracle.as.install.classic.ca.standard.StandaloneTool.execute(StandaloneTool.java:50)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:339)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.classic.ca.standard.InstanceProvisioningTask.doExecute(InstanceProvisioningTask.java:218)
... 12 more
Caused by: oracle.as.provisioning.engine.CfgWorkflowException
at oracle.as.provisioning.engine.Engine.processEventResponse(Engine.java:596)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:178)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:116)
at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:523)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 13 more
Caused by: oracle.as.provisioning.util.ConfigException:
Error creating ASInstance asinst_1.
Cause:
An internal operation has failed: Error in starting opmn server
Operation aborted because of a system call failure or internal error
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:317)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:166)
... 17 more
Caused by: oracle.as.management.opmn.optic.OpticException: Error in starting opmn server
Operation aborted because of a system call failure or internal error
at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)
at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:254)
... 18 more
Executing Task: Starting OPMN
GJS: About to call startOpmn
GJS: Entered startOpmn
GJS: Windows..About to execute: cmd /c C:\Users\ABCDUSER\AppData\Local\Temp\startallOpmn1356764693155.bat
*************** Trying to Start OPMN **************
*************** Executing Command **************
cmd /c C:\Users\ABCDUSER\AppData\Local\Temp\startallOpmn1356764693155.bat
C:\Users\ABCDUSER\AppData\Local\Temp>SET ORACLE_HOME=F:\Installed_Software\Middleware_Dev11\Oracle_FRHome1
C:\Users\ABCDUSER\AppData\Local\Temp>CALL F:\Installed_Software\Middleware_Dev11\asinst_1\bin\opmnctl.bat startall
opmnctl startall: starting opmn and all managed processes...
Can not resolve ABCDUSER-PC for interface any
opmnctl startall: failed.
GJS: About to call startOpmn
GJS: Entered startOpmn
GJS: Windows..About to execute: cmd /c C:\Users\ABCDUSER\AppData\Local\Temp\startallOpmn1356764701282.bat
*************** Trying to Start OPMN **************
*************** Executing Command **************
cmd /c C:\Users\ABCDUSER\AppData\Local\Temp\startallOpmn1356764701282.bat
C:\Users\ABCDUSER\AppData\Local\Temp>SET ORACLE_HOME=F:\Installed_Software\Middleware_Dev11\Oracle_FRHome1
C:\Users\ABCDUSER\AppData\Local\Temp>CALL F:\Installed_Software\Middleware_Dev11\asinst_1\bin\opmnctl.bat startall
opmnctl startall: starting opmn and all managed processes...
Can not resolve ABCDUSER-PC for interface any
opmnctl startall: failed.
GJS: About to call startOpmn
GJS: Entered startOpmn
GJS: Windows..About to execute: cmd /c C:\Users\ABCDUSER\AppData\Local\Temp\startallOpmn1356764702541.bat
*************** Trying to Start OPMN **************
*************** Executing Command **************
cmd /c C:\Users\ABCDUSER\AppData\Local\Temp\startallOpmn1356764702541.bat
C:\Users\ABCDUSER\AppData\Local\Temp>SET ORACLE_HOME=F:\Installed_Software\Middleware_Dev11\Oracle_FRHome1
C:\Users\ABCDUSER\AppData\Local\Temp>CALL F:\Installed_Software\Middleware_Dev11\asinst_1\bin\opmnctl.bat startall
opmnctl startall: starting opmn and all managed processes...
Can not resolve ABCDUSER-PC for interface any
opmnctl startall: failed.
Executing Task: Creating OHS
progress in calculate progress4
Executing Task: Creating FRCommon System Component
progress in calculate progress4
Executing Task: Creating Forms System Component
GJS: isOIDUsed = false
GJS: oidHost =
GJS: oidPort =
GJS: Got DomainInfo
Adding Property -DomainHome: F:/Installed_Software/Middleware_Dev11/user_projects/domains/ClassicDomain
GJS: set up forms properties
progress in calculate progress4
Executing Task: Deploying Reports
GJS: About to deploy applications..
******* MACRO [ ORACLE_INSTANCE ] is set with value [ F:/Installed_Software/Middleware_Dev11/asinst_1 ] *******
========================JDBC Details========================
MBean Server Connection is :javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection@e062d3
ABCDUSER-PC 7001
Instance asinst_1 already exists, continuing with component creation
F:\Installed_Software\Middleware_Dev11\Oracle_FRHome1 F:\Installed_Software\Middleware_Dev11\asinst_1 asinst_1
oracle.as.config.ProvisionException: Failed to start the component
at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:137)
at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:73)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:401)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:358)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:136)
at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:523)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:339)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:339)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.engine.CfgWorkflowException
at oracle.as.provisioning.engine.Engine.processEventResponse(Engine.java:596)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:368)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:136)
at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:523)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 13 more
Caused by: oracle.as.provisioning.util.ConfigException:
Error creating ASComponent emagent_asinst_1.
Cause:
An internal operation has failed: Failed to start the component
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:414)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:358)
... 17 more
Caused by: oracle.as.config.ProvisionException: Failed to start the component
at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:137)
at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:73)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:401)
... 18 more
Executing Task: Reloading OPMN
GJS: About to call reloadOpmn
GJS: Entered reloadOpmn
GJS: Windows..About to execute: cmd /c C:\Users\ABCDUSER\AppData\Local\Temp\reloadOpmn1356765167918.bat
*************** Trying to Start OPMN **************
*************** Executing Command **************
cmd /c C:\Users\ABCDUSER\AppData\Local\Temp\reloadOpmn1356765167918.bat
C:\Users\ABCDUSER\AppData\Local\Temp>SET ORACLE_HOME=F:\Installed_Software\Middleware_Dev11\Oracle_FRHome1
C:\Users\ABCDUSER\AppData\Local\Temp>CALL F:\Installed_Software\Middleware_Dev11\asinst_1\bin\opmnctl.bat reload
Can not resolve ABCDUSER-PC for interface any
opmnctl reload: failed.
Executing Task: Executing: opmnctl restartproc ias-component=ohs1
GJS: About to call startOpmn
GJS: Entered startOpmn
GJS: Windows..About to execute: cmd /c C:\Users\ABCDUSER\AppData\Local\Temp\Opmn1356765171500.bat
*************** Trying to Start OPMN **************
*************** Executing Command **************
cmd /c C:\Users\ABCDUSER\AppData\Local\Temp\Opmn1356765171500.bat
C:\Users\ABCDUSER\AppData\Local\Temp>SET ORACLE_HOME=F:\Installed_Software\Middleware_Dev11\Oracle_FRHome1
C:\Users\ABCDUSER\AppData\Local\Temp>CALL F:\Installed_Software\Middleware_Dev11\asinst_1\bin\opmnctl.bat restartproc ias-component=ohs1
Can not resolve ABCDUSER-PC for interface any
opmnctl restartproc: opmn is not running.
Executing Task: Creating Shortcuts
Removing shortcut item.
Setting folder name to Oracle Classic Instance - asinst_1
Setting itemName to Start all OPMN managed components
Executing Task: Restarting Managed Server: WLS_FORMS
XXX: adding task: oracle.as.install.classic.ca.standard.StartStopManagedServer
AdminServer port is 7001
trying to connect to ABCDUSER-PC 7001
Successful
getDomainRuntimeMBeanServerConnection ...
Connecting to Domain runtime ...
trying to connect to ABCDUSER-PC 7001
Successfully connected to the Domain Runtime ...
trying to connect to ABCDUSER-PC 7001
Successful
MBean Server Connection is :javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection@13371c5
Stopping Managed Server : WLS_FORMS
In public stop
ASWLServer.stop ...
Stopping Weblogic Server...
[WARN ] Use of -Djrockit.optfile is deprecated and discouraged.
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Connecting to t3://ABCDUSER-PC:7001 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'ClassicDomain'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
Shutting down the server WLS_FORMS with force=false while connected to AdminServer ...
Exiting WebLogic Scripting Tool.
Done
Stopping Derby Server...
getDomainRuntimeMBeanServerConnection ...
Connecting to Domain runtime ...
trying to connect to ABCDUSER-PC 7001
Successfully connected to the Domain Runtime ...
getDomainRuntimeMBeanServerConnection ...
Connecting to Domain runtime ...
trying to connect to ABCDUSER-PC 7001
Successfully connected to the Domain Runtime ...
Starting Managed Server : WLS_FORMS
In public start
ASWLServer.start ...
DEBUG : Loading the 32 bit dll here
DEBUG : Loading DLL : F:/Installed_Software/Middleware_Dev11/Oracle_FRHome1/install/config/StartUtil.dll
DEBUG : Loaded DLL : F:/Installed_Software/Middleware_Dev11/Oracle_FRHome1/install/config/StartUtil.dll
getDomainRuntimeMBeanServerConnection ...
Connecting to Domain runtime ...
trying to connect to ABCDUSER-PC 7001
Successfully connected to the Domain Runtime ...
getDomainRuntimeMBeanServerConnection ...
Connecting to Domain runtime ...
trying to connect to ABCDUSER-PC 7001
Successfully connected to the Domain Runtime ...
progress in calculate progress4
Executing Task: Restarting Managed Server: WLS_REPORTS
XXX: adding task: oracle.as.install.classic.ca.standard.StartStopManagedServer
AdminServer port is 7001
trying to connect to ABCDUSER-PC 7001
Successful
getDomainRuntimeMBeanServerConnection ...
Connecting to Domain runtime ...
trying to connect to ABCDUSER-PC 7001
Successfully connected to the Domain Runtime ...
trying to connect to ABCDUSER-PC 7001
Successful
MBean Server Connection is :javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection@9dea1a
Stopping Managed Server : WLS_REPORTS
In public stop
ASWLServer.stop ...
Stopping Weblogic Server...
[WARN ] Use of -Djrockit.optfile is deprecated and discouraged.
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Connecting to t3://ABCDUSER-PC:7001 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'ClassicDomain'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
Starting Managed Server : WLS_REPORTS
In public start
ASWLServer.start ...
DEBUG : Loading the 32 bit dll here
DEBUG : Loading DLL : F:/Installed_Software/Middleware_Dev11/Oracle_FRHome1/install/config/StartUtil.dll
DEBUG : Loaded DLL : F:/Installed_Software/Middleware_Dev11/Oracle_FRHome1/install/config/StartUtil.dll
getDomainRuntimeMBeanServerConnection ...
Connecting to Domain runtime ...
trying to connect to ABCDUSER-PC 7001
Successfully connected to the Domain Runtime ...
getDomainRuntimeMBeanServerConnection ...
Connecting to Domain runtime ...
trying to connect to ABCDUSER-PC 7001
Successfully connected to the Domain Runtime ...
progress in calculate progress4
Going to execute executeAfterConfig
Setting the config progress panel percent to completed..
In Config Module Finish Event...
Setting current page standalone validations to true
outputFile:C:\Program Files\Oracle\Inventory\logs\installProfile2012-12-28_10-39-12PM.log
in writeProfile method..
Calling OUI Exit Operations Here.
[ENGINE] Adding C:\Users\ABCDUSER\AppData\Local\Temp\OraInstall2012-12-28_10-39-12PM for deletion.
I don't understand what's the problem by this log file.
please help anyone. -
Error while installing oracle9.2 on linux84 - file format not recongnised
Trying to install oracle 9.2.0.4 on linux84 box and getting error while triggering make file : ins_sqlplus.mk. Error is with object file : safiimfg.o file format not recognised.
What i am missing here ?linux84???
Which distribution and version do you running?
Also execute "uname -mriop" and post the output to forum. -
Error while installing "The product keycode you entered is not valid"
Get this message while installing CR Server XI English, even though I am entering the Product Activation Number printed on the label attached to the CD sleeve!
Any ideas?The reason you are waiting is due to posting in the BOE Admin forum.
Moved to Report Designer forum.
Contact Customer Services to verify your keycode and if still an issue then try downloading SP 3 full build and install using it.
https://smpdl.sap-ag.de/~sapidp/012002523100009989492010E/cr2008_sp3_fullbuild.zip
Don -
Error after install iTunes setup: Apple application Support was not found
Hello,
I am trying to install iTunes on my pc. During the downloading of iTunes setup.exe i get this error:
Something went wrong during the installation of this item. Microsoft. VC80.CRT, type="win32", version="8.0.5072.7.6195", publicKeyToken="lfrc8b3b9a1e18e3b",process or Architecture=x86"
I choose 'ok' and the download continues. When the download is complete and i try to open the iTunes setup its given the error saying:
Apple Application Support was not found
Apple Application Support is required to run iTunesHelper. Please uninstall iTunes then install iTunes again.
I tried this more than once, but its not working. I also tried to extract the iTunes setup.exe with winrar and then to do an install with appleapplicationsupport.msi, but its given the same error.
Anyone please has some advice?
Thanks in advance!
MariekeWhen I look at my control panel the only program that shows is "I Tunes". No other supporting programs are showing up in the control panel nor the Common Files nor in the Program Files (x86).
That's an extreme case of this.
We'll try doing standalone installations of all the supporting programs.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone Apple Mobile Device Support install.
Doubleclick the AppleSoftwareUpdate.msi to do a standalone Apple Software Update install.
Doubleclick the Bonjour.msi (or Bonjour64.msi) to do a standalone Bonjour install.
Do those four installs go through okay? If so, does your iTunes launch without any errors now? -
Hi Anuj & All,
I'm trying to create an outbound scenario with EDIFACT-D96A-ORDERS. A simple SOA composite application polling data from DB and through B2B adapter 'send' option provides data to B2B system.
Set up two partner profiles like this,
Host:
Name: HTP
EDI Group ID: HTP
EDI Interchange ID: Interchange Sen
EDI Interchange ID Qualifier: 01
Remote:
Name: RTP
EDI Group ID: RTP
EDI Interchange ID: Interchange Rec
EDI Interchange ID Qualifier: 01
Other settings are as usual. Delivery channel of generic file created on RTH.
Now, few documents settings on B2B console are like this,
D96A-> Interchange tab
Create UNA: Never
ORDERS-> Transaction
Functional Group Identifier Code: ORDERS
Controlling Agency: UN
- other properties are unchanged.
On SOA side, the bpel invoke activity which calls B2B adapter has following properties:
<invoke name="InvokeOrders"
inputVariable="InvokeOrders_send_InputVariable"
partnerLink="D96A.ORDERS" portType="ns2:send_ptt"
operation="send" bpelx:invokeAsDetail="no">
<bpelx:inputProperty name="b2b.toTradingPartnerIdType"
expression="'NAME'"/>
<bpelx:inputProperty name="b2b.toTradingPartnerId"
expression="'RTP'"/>
<bpelx:inputProperty name="b2b.messageType" expression="1"/>
<bpelx:inputProperty name="b2b.messageId" variable="messageID"/>
<bpelx:inputProperty name="b2b.fromTradingPartnerIdType"
expression="'NAME'"/>
<bpelx:inputProperty name="b2b.fromTradingPartnerId"
expression="'HTP'"/>
<bpelx:inputProperty name="b2b.documentTypeName"
expression="'ORDERS'"/>
<bpelx:inputProperty name="b2b.documentProtocolVersion"
expression="'D96A'"/>
<bpelx:inputProperty name="b2b.documentProtocolName"
expression="'EDIFACT'"/>
<bpelx:inputProperty name="b2b.documentDefinitionName"
expression="'ORDERS_def'"/>
<bpelx:inputProperty name="b2b.conversationId"
variable="ConversationID"/>
</invoke>
The error I'm getting on B2B Console->Reports->Business Message, while running this is,
Error Code B2B-50547
Error Description Machine Info: (htp01310-vm01.htp.com) Description: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
Note: On Manage Deployment Tab I've checked the agreement is in active state.
-- Business Message (Result):--
State: MSG_ERROR
Document Type: ORDERS
Agreement: <blank>
Sender: HTP
Receiver: <blank>
-- Application Message (Result):--
Sender Id Type: NAME
Sender Value: TCS
Receiver Id Type: NAME
Receiver Value: ORCL
Document Type: ORDERS
Document Definition: ORDERS_def
Document Protocol Name: EDIFACT
Document Protocol Version: D96A
Direction: OUTBOUND
State: MSG_COMPLETE
- Can anybody please shoot some pointer on how to resolve this? Please let me know if you need further configuration details which I've not mentioned here.
Regards,
- @bhijitHi Mariusz,
Thanks for your reply. Yes I think so, probably you're right. But finest trace level doesn't give much clues on "wrong mapped" data. Anyway, here is the detail log. Please don't forget to point out if you find something interesting.
#### <Error> <oracle.soa.b2b.engine> <htp01310-vm01.htp.com> <soa_server1> <Workmanager: , Version: 0, Scheduled=false, Started=false, Wait time: 0 ms
> <<anonymous>> <BEA1-0D3F5ABAC0B2E50C6CCB> <449b4b64fa2729cc:59737e36:146f08831ee:-8000-0000000000127da6> <1404379704092> <BEA-000000> <Error -: B2B-50547: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
at oracle.tip.b2b.tpa.RepoDataAccessor.queryAgreementMO(RepoDataAccessor.java:887)
at oracle.tip.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:415)
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:465)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:224)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1555)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:819)
at oracle.tip.b2b.engine.Engine.outgoingContinueProcess(Engine.java:4100)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3921)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3309)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:637)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Error -: B2B-50547: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
at oracle.tip.b2b.tpa.RepoDataAccessor.queryAgreementMO(RepoDataAccessor.java:887)
at oracle.tip.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:415)
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:465)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:224)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1555)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:819)
at oracle.tip.b2b.engine.Engine.outgoingContinueProcess(Engine.java:4100)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3921)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3309)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:637)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
>
#### <Error> <oracle.soa.b2b.engine> <htp01310-vm01.htp.com> <soa_server1> <Workmanager: , Version: 0, Scheduled=false, Started=false, Wait time: 0 ms
> <<anonymous>> <BEA1-0D3F5ABAC0B2E50C6CCB> <449b4b64fa2729cc:59737e36:146f08831ee:-8000-0000000000127da6> <1404379704569> <BEA-000000> <Error -: B2B-50547: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
at oracle.tip.b2b.tpa.RepoDataAccessor.queryAgreementMO(RepoDataAccessor.java:887)
at oracle.tip.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:415)
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:465)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:224)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1555)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:819)
at oracle.tip.b2b.engine.Engine.outgoingContinueProcess(Engine.java:4100)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3921)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3309)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:637)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Error -: B2B-50547: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
at oracle.tip.b2b.tpa.RepoDataAccessor.queryAgreementMO(RepoDataAccessor.java:887)
at oracle.tip.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:415)
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:465)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:224)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1555)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:819)
at oracle.tip.b2b.engine.Engine.outgoingContinueProcess(Engine.java:4100)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3921)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3309)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:637)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
>
Rgds,
- Abhijit
P.S. - Can you please check what is the value of "Functional Group Identifier Code" for D96A ORDERS. -
Error while adding the issue for production (item cost not found)
Hi all,
The scenario is,
when the user is trying to add the issue for production system is showing error item cost not
found.The item which is issued is Inventory + purchase item with manual issue method.The valuation
method for that item is FIFO.since the valuation method is FIFO,error related to item cost should
not occur.
Since the valuation method is FIFO.Item cost error should not occur.
The error related to item cost must not occur at the time of issue for production.
Regards-
Mona.Hi!
Please check these threads
Sales Delivery Document
Item Cost Error
No item cost was found -
Getting error while using CAN api's. Says channel not found in MAX.
Hi,
I am using NI-CAN series2, can card. The same is not connected to my system. Hence i have used the virtual channel 256. Here i am reading the DBC file and providing an option to the user to select a set of messages to transmitt\receive. But i am getting an error saying
"Error -1074388479 occurred at CAN Get Channel Data Type.vi
Possible reason(s):
NI-CAN: (Hex 0xBFF62201) Channel not found in MAX or the CAN database file. Solutions: Check for proper spelling using MAX; For Get/Set Property, ensure that the channel name exists in the task."
Please help.
Regards,
YogeshHi Marshall,
Thanx for the reply and spending time for the same. I tried the example which u had mentioned. This example is working with 256 virtual channel. But my code is no executing and giving he same problem even after loading the DBC file into max(Same loaded im my code). Always load the dbc file in max and then only i should run the code, is it so? But this can not happen, since the user may not hav max. I hav attached the code. Pls verify it, and give me the feedback.
Waiting for the reply,
Yogesh
GET
Larsen & Toubro
India
Attachments:
CanMsgFrame.vi 68 KB -
Error while installing Forms 11g :checking physical memory
Dear all
I have downloaded oracle fusion middle ware.And i Started set up.
In the prerequisite check an error happens :
Root
Checking operating system certification
Expected result: One of 5.1,5.2,6.0
Actual Result: 5.1
Check complete. The overall result of this check is: Passed
Checking service pack
Expected result: 2
Actual Result: 2
Check complete. The overall result of this check is: Passed
Checking physical memory
Expected result: 1024MB
Actual Result: 996MB
Check complete. The overall result of this check is: Failed <<<<
I use Window xp. I changed the virtual memory for the windows to 3500 MB, and I restated windows. But the error still occurred and the setup failed
Please help meI never tried installing using 1GB but I acknowledge that it is difficult to install even on a 2GB machine if other programs (the Oracle DB in my case) use a substantial amount of available memory. Once I freed up the physical memory I was consistently able to install F&R
-
Error while installing the client
Hi,
While installing the CRM Mobile client I get the following error "Requisite Version of JRE not found". The JDK version which I have installed is 1.4.2_13 and my class path settings seems to be fine. Kindly suggest
regards,
ArunHi,
Is there a specific reason for installing SQL Express 2005? If it's not, take MSDE 2000 and patch it to SP04. You get it for free in the download section of the microsoft homepage.
The failure is, that the installation routine is looking for msde2000 sp04 installation. if you have installed 2005 express, this gets an error... My installation is runing very well with msde2000 on sp04.... just try it
regrads,
Alexander Brocke -
Error while generating form 16 in portal - Screen output without connection
Dear Gurus,
We are facing error while generating form 16 through portal and getting the below error in portal.
Screen output without connection to user. error key: RFC_ERROR_SYSTEM_FAILURE
When we checked for dumps in R/3 the following dump is coming:
DYNPRO_SEND_IN_BACKGROUND with error message :
Message class : FPRUNX
Message number: 102: No job started.
Then we tried to execute the form 16 through R/3 itself using tcode PC00_M40_F16 after putting in the relevant values in the selection screen and then press on PRINT FORM button, but surprisingly the system logs out without giving any error or dump.
We tried doing it repeatedly and once in these attempts we got an error saying Initialization of font server module failed.
We are not getting clue as to why this is happening. <<Text removed>>
Regards
Edited by: Matt on Jul 27, 2011 9:50 AMDear,
This might be the problem of Adobe Acrobat Reader. what is the version of Adobe you are using ?? If it 9.0, then uninstall it and reinstall 8.0 and then check .
Could you please check your installed SAPGUI component? If component 'Engineering Client Viewer' is installed, please uninstall
it. And try to call same transaction again.
BR, Deepak -
Error while installing OWB
after 50% install.. it says
"Error in writing to file c:\oracle\ora9201\bin\oci.dll
The process cannot access the file because it is being used by another process"
Apparently I have restarted the workstation and closed all oracle related services in services and no other program is running expect the installer.
Can any one help in resolving the issue. Or can I hit the ignore button and continue installing?Always install OWB into a new ORACLE_HOME unless the Installation and Configuration Guide states otherwise. This has only happened twice. OWB 9.0.2.62.3 was the last version to allow installation into an existing ORACLE_HOME. Another thing you can do is go to www.sysinternals.com and download the utility LISTDLLs. It is great. From a command prompt, start it with the syntax: listdlls >log.txt
This will output the DLLs in use and which executable is using it. Search for the DLL in the log.txt and scroll up until the double line. The executable name locking the DLL will be above the double line. If you have the Microsoft Distributed Transaction Coordinator Service running on the client, it will lock Oracle DLLs. This has been a common issue in the past, going back to the days of Data Mart Suite. This was documented in the Release Notes for it and may still be in the system in a note somewhere. It is in: DMS: Unable To Install; Filesopen/Service Running On Compaq Server Doc ID: Note:1080977.6 and Certain Files which need to be Reinstalled are Being Used Doc ID: Note:117672.1
The first note I wrote back before 2000.
Barry -
Error while Installing Oracle Services for Microsoft Transaction Server
I downloaded "Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP" and installed the personal edition. It did not install successfully and gave this error message:
Error while Installing Oracle Services for Microsoft Transaction Server
The specified key was not found while trying to GetValue
- stop installation of all products.
- stop installation of this component only.
The installation of Oracle 9i Database was unsuccessful
The Integration tools and client installed just fine from the same download. Why didn't the database install successfully? All the other components seemed to install just fine and the database appeared to be created - but I could not open it and there was not start menu option for DBA Studio.
I am running Windows 2000 professional with Service Pack 3 on a 2 GHz Pentium4 machine with 512MB Rambus RAM, 32bit color graphics ATI All-in-Wonder card, about 40GB of disk space, a local peer-to-peer network via cat5 cable to another Win2k P3 machine, and Creative Soundblaster Audigy card. Do I need to adjust any network settings? Would it help or hinder if I installed MS IIS? WinNT has a Microsoft Transaction Server (MTS) but Win2k has COM+ instead; does that make a difference in terms of the installer looking for MTS? Do I need to configure COM+ in some special way / change settings?HI Salman,
I am doing the following.
1. I am installing Oracle 10.2.01 Database(Not Client) on my windows Xp laptop. While installation i Choose the custom option and Check the Oracle Windows Interface. In that i check the "Install Oracle Services for Microsoft Transaction server" checkbox. The installation goes on fine till 99% and when it tries to install the
Oracle Services for Microsoft Transaction server it gives an error saying that "Microsoft Transaction server" was not found on the system.
I had previously installed the same on my laptop and it was working fine. but after uninstallation when i try to re install i get this problem.
If i go to the services.msc option in windows i still see the OracleMTSRecoveryService option even when i have uninstalled oracle. But when i try to start the services i get the following error
Could Not start the OracleMTSRecoveryService on the local computer.
Error 3: The system cannot find the file specified.
Any help on how to resolve this issue will be highly appreciated -
SETUP ERROR WHILE INSTALLING SQL SERVER 2008 R2
Hi ,
I'm coming across the following error while installing Microsoft SQL Server 2008R2
SQL Server Setup has encountered the following error:
The required MSI package 'D:\SQL Sever 2008 R2 Developer Edition\x86\setup\sql_engine_core_shared_msi\sql_engine_core_shared.msi' doesn't exist.
Error code 0x84B20001.
I tried reinstalling the same. But results the same.
Please suggest. :)Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068709375
Exit facility code: 1202
Exit error code: 1
Exit message: The required MSI package 'D:\softwares\SQL Sever 2008 R2 Developer Edition\x86\setup\sql_engine_core_shared_msi\sql_engine_core_shared.msi'
doesn't exist.
Start time: 2013-12-31 20:47:50
End time: 2013-12-31 20:55:44
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131231_204629\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.1600.1%26EvtType%3d0xD2FD83B3%400xC2B0B50B%401202%401
Machine Properties:
Machine name: SAMPLE-PC
Machine processor count: 2
OS version: Windows 7
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2005
Tools 1033
Express Edition 9.2.3042 No
Sql Server 2005
ToolsClient 1033
Express Edition 9.2.3042 No
Sql Server 2005
ToolsClient\Connectivity 1033 Express Edition
9.2.3042 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services
1033 Express Edition 10.1.2531.0 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication
1033 Express Edition 10.1.2531.0 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: D:\softwares\SQL Sever 2008 R2 Developer Edition\x86\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: TEST
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: TEST
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: SAMPLE-PC\SAMPLE
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131231_204629\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: TEST
INSTANCENAME: TEST
ISSVCACCOUNT: TEST
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: SAMPLE-PC\TEST
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: TEST
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: SAMPLE-PC\SAMPLE
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131231_204629\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Analysis Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Integration Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131231_204629\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.ChainerInvalidOperationException
Message:
The required MSI package 'D:\softwares\SQL Sever 2008 R2 Developer Edition\x86\setup\sql_engine_core_shared_msi\sql_engine_core_shared.msi' doesn't exist.
Data:
ChainerInvalidOperationExceptionData = InstallPackage
DisableWatson = true
Stack:
at Microsoft.SqlServer.Configuration.SetupExtension.MsiInstallEngineActionBehavior.ModifyAction(String installedProductCode, String installedProductVersion, String pathOfPackageOnMedia, InstallAction pkgAction)
at Microsoft.SqlServer.Configuration.SetupExtension.MSIInstallerEngine.InstallPackage(PackageId pkg, InstallAction pkgAction)
at Microsoft.SqlServer.Configuration.MsiExtension.PackageInstallAction.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
Maybe you are looking for
-
Is it possible to assign a value to a radio button or checkbox?
I would like to assign radio buttons or checkboxes a value and then have the results of the buttons selected tabulated at the end of a form, if desired. Is that possible? Thanks
-
Using arrays with the IF conditional
What Im trying to do is test the value of an variable and see if it exists inside an array. So as a simple example I would do something like this with AppleScript set excludeList to {"A", "B"} set theItem to "C" if theItem is not in excludeList then
-
[SOLVED] Thumbnail view of image files in Thunar and PCManFM
Hello all! I have a question about the way Thunar and PCManFM handles thumbnails of image files. I understand that Thunar users can use the thunar-thumbnailers package to get previews of all sorts of different file formats. But on the thumbnailers pa
-
Hi, I have confiured WHT on payment received from customer. It is working fine for f-28. But when I use FBCJ cash recipt it is not deducting WHT. I observed that in FBCJ- Cash payment Screen has WHT payment tab, but in Cash Receipt Screen there is no
-
Dear experts, How to create in msg in Process chains. Is it okay to create msgs anywhere in the PC. Can i have the complete steps please. Thanks dave