Error while Installing GUI .

Hi all,
I am getting errors while installing in GUI 6.40 in my desktop.
The following files could not be registerd.
C:\programfiles\frontend\sapgui\wdtfuncu.ocx.
C:\programfiles\frontend\sapgui\wdtlogu.ocx
C:\programfiles\frontend\sapgui\wdtaocxu.ocx.
System have given me big logfile.
Please help me solve this problem.
Regards.
hari

Hi Cindy,
Sorry for the late replay.
Yes, I was getting error while installing GUI. these file are not registerd. But there no any specified procedure or certain order.These files should be there wdtfuncu.ocx,wdtlogu.ocx and wdtaocxu.ocx.
regsvr32 "C:\program files\frontend\sapgui\wdtfuncu.ocx"
regsvr32 "C:\program files\frontend\sapgui\wdtlogu.ocx"
regsvr32 "C:\program files\frontend\sapgui\wdtaocxu.ocx"
Good luck
Regards.
Hari

Similar Messages

Error while installing Mini SAP Basis system 4.6D test suite

Hi Gurus,
I am getting error while installing Mini SAP Basis system 4.6D test suite on my laptop. I trying to install this version under Windows Xp. I tried so many times to rectify this error but no use. i followed the instruction in the readme file.The error is below in quote.
"InstController MakeStepsDeliver:108 connection to GUI of installation tool has been cut off.Installation has been stopped."
your help very much appreciated...
Regards
dinesh.a

is win xp supported for mini sap 46d?
-> try netweaver 2004s instead ...
GreetZ, AH

Error while installing oracle 11g in centos 5.3

I got this error while installing oracle 11g in my laptop with centos 5.3
the error is:
./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 76430 MB Passed
Checking swap space: must be greater than 150 MB. Actual 6000 MB Passed
Checking monitor: must be configured to display at least 256 colors
Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,
Continue? (y/n) [n] y
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-03-07_12-09-48PM. Please wait ...[oracle@www database]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.NoClassDefFoundError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at java.awt.Toolkit$2.run(Toolkit.java:821)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:804)
at com.jgoodies.looks.LookUtils.isLowResolution(Unknown Source)
at com.jgoodies.looks.LookUtils.<clinit>(Unknown Source)
at com.jgoodies.looks.plastic.PlasticLookAndFeel.<clinit>(PlasticLookAndFeel.java:122)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at javax.swing.SwingUtilities.loadSystemClass(SwingUtilities.java:1783)
at javax.swing.UIManager.setLookAndFeel(UIManager.java:480)
at oracle.install.commons.util.Application.startup(Application.java:758)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)
please help me solve this...i am new to linux so can anyone give me detailed instructions.i tried using the installation guide and even though i got this error...

Firstly Thank you everyone for giving me your suggestions.
I tried installing oracle 11g in centos using Tim's tutorial and i all went fine initially i got the oracle 11g installation GUI and i got an error while starting database configuration.
The error was : TNS failed
and i got two options in that dialog box "ignore" and "abort"
after press ignore a few times.the installation finished successfully.
When i opened terminal and typed
sqlplus SYS as SYSDBA
it asked for password
when i gave the password again it showed the error TNS failed
kindly help me solve this.....

Error while installing OWB

Error while installing OWB
after 50% install.. it says
"Error in writing to file c:\oracle\ora9201\bin\oci.dll
The process cannot access the file because it is being used by another process"
Apparently I have restarted the workstation and closed all oracle related services in services and no other program is running expect the installer.
Can any one help in resolving the issue. Or can I hit the ignore button and continue installing?

Always install OWB into a new ORACLE_HOME unless the Installation and Configuration Guide states otherwise. This has only happened twice. OWB 9.0.2.62.3 was the last version to allow installation into an existing ORACLE_HOME. Another thing you can do is go to www.sysinternals.com and download the utility LISTDLLs. It is great. From a command prompt, start it with the syntax: listdlls >log.txt
This will output the DLLs in use and which executable is using it. Search for the DLL in the log.txt and scroll up until the double line. The executable name locking the DLL will be above the double line. If you have the Microsoft Distributed Transaction Coordinator Service running on the client, it will lock Oracle DLLs. This has been a common issue in the past, going back to the days of Data Mart Suite. This was documented in the Release Notes for it and may still be in the system in a note somewhere. It is in: DMS: Unable To Install; Filesopen/Service Running On Compaq Server Doc ID: Note:1080977.6 and Certain Files which need to be Reinstalled are Being Used Doc ID: Note:117672.1
The first note I wrote back before 2000.
Barry

Error while installing Oracle 10g on Fedora Core 1

Error while installing Oracle 10g on Fedora Core 1. After 40% of the Installation is thru, the progress bar is showing 40%, it gives error "Not connected to Oracle" and the installation has to be terminated.
We have tried by using the on-line procedure and changing the required script to make believe it as said.

Are you createing DB also???

Error while installing SQL Server 2012 X64 SP2,

Error while installing SQL Server 2012 X64 SP2,
When I installed the SQL Server 2012 X64 SP1, I got the attached error.
What might be the issue here?
Thank you
Best
Jamal

Hello,
Are you trying to install SQL Server on a compressed or encrypted drive? SQL Server won’t install on a drive/folder with these attributes.
Are you trying to install SQL Server on a ReFS file system? It is not supported on SQL Server 2012.
Disable any security/antivirus software and download the media again. Mount the media (.ISO file) and try to install again.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Error while installing the NerWeaver Platform

Error While installing the NetWeaver Instance
Posted: Nov 22, 2004 2:37 PM Reply E-mail this post
When I am installing 'SAP NetWeaver Suite'the below error came, can someone help me out on this below error?
MOS-01011 'C:\usr\sap\BWI\SYS\exe\run/sapstartsrv.exe' returned with '-1'.
The J2EE server is up unrunning @ the installing the Netweaver ABAP Instance I got this error.
For the user BWI it has the Administrator previlages i checked so many time but I am unable to get it.
Please help me out the error.

Hi George,
Kindly use the latest installation Masted in Service market place. That will possibly solve your problem.
Regards
Vivek

Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2

Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
bash-3.00$ ./irca.sh
Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
(c) Copyright 2006 Oracle Corporation. All rights reserved.
ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
Please verify that the ORACLE_HOME is set correctly.
bash-3.00$

Hi Craig,
Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
Section :- Oracle Application Server 10g Release 3 (10.1.3)
Regards,
Praaksh.

Error while installing gateway please help soon

Error while installing gateway in
Microsoft Windows Server 2003.
error while installing gateway
E:\idm\gateway>gateway -i
10/02/2008 15.13.38.015000 [4972] (../../../../src/wps/agent/logging/WSTrace.cpp
,150): trace active, level: 4, file: E:\\IDMLOGS\\gateway.log, maxSize: 10240 KB
10/02/2008 15.13.38.015000 [4972] (../../../../src/wps/agent/logging/WSTrace.cpp
,108): In WSTrace::init()
10/02/2008 15.13.38.015000 [4972] (../../../../src/wps/agent/logging/WSTrace.cpp
,109): Gateway version: 'Sun Java System Identity Manager 7.1'
10/02/2008 15.13.38.015000 [4972] (../../../../src/wps/agent/logging/WSTrace.cpp
,110): OS version: 'Windows Server 2003 Family Service Pack 1 (Build 3790)'
An error occured when trying to install the service: No error
E:\idm\gateway>

Use that MS installer cleanup to get rid of iTunes first, then QuickTime.
Actually, I should back up. Go to the article I link below, and scroll down to the section
*General Installation Troubleshooting*
Important: A majority of customers experience successful iTunes installation after completing these troubleshooting procedures. If one does not help, proceed to the next.
-Completely Remove iTunes and QuickTime (Click to show)
-Empty your Temp directory and restart (Click for more)
-Clean up iTunes installer files on the computer (Click for more)
-Download QuickTime Standalone Installer (Click for more)
-Disable other conflicting software (Click for more)
-Make sure your folder names don't contain strange characters (Click for more)
http://docs.info.apple.com/article.html?artnum=93976

Error while installing J2EE Add- In to the ABAP system

Error while installing J2EE Add-In to the ABAP system
We are installing J2EE Add-In to the ECC5 System in the new hardware.
When are getting Error while installing J2EE Add-In to the ABAP system.
Transaction Begin*****************************
ERROR 2005-08-10 14:58:28
CJSlibModule::writeLogEntry()
CJS-20011 J2EE engine configuration error. DIAGNOSIS: Error when
configuring J2EE Engine. See output of
logfile /usr/sap/QSS/install/batchconfig.log: 'My Library Path
is: /usr/j2se/jre/lib/sparcv9/server:/usr/j2se/jre/lib/sparcv9:/usr/j2se/jre/../lib/sparcv9:/tmp/sapinst_exe.13084.1123702275:/usr/lib::/usr/openwin/lib:/usr/sap/QSS/SYS/exe/run:/oracle/QSS/920_64/lib:/oracle/QSS/920_64/lib32:/usr/lib
ElementInfoTask has finished successfully on dispatcher
ConsoleLogsTask has finished successfully on dispatcher
ChangeManagerPropsTask has finished successfully. Manager:
LockingManager on dispatcher
ChangeManagerPropsTask has finished successfully. Manager:
ClusterManager on dispatcher
ElementInfoTask has finished successfully on server
ConsoleLogsTask has finished successfully on server
ChangeManagerPropsTask has finished successfully. Manager:
LockingManager on server
ChangeManagerPropsTask has finished successfully. Manager:
ClusterManager on server
ChangeServicePropsTask has finished successfully. Service: dbpool on
server
ChangePasswordsTask finished successfully.
Error occured while connecting to database (UploadFile). Msg: No such
algorithm: DESede
Transaction end***********************************
We tried twice clean installation, after removing j2ee dir, SCS and
resp profiles and droping PSAPQSSDB tablespace and SAPQSSDB user.
I have also confirmed the passwords in ABAP system/000 for SAPJSF, DDIC, J2EE_ADMIN, J2EE_GUEST.
We are getting the same error in both tries.
Kindly advice us to resolve the problem.
Thanks and Regards,
Srinivas

Ananda,
you saved my day! I've been banging my head against the wall with this same problem during a J2EE add-in installation for SRM 4.0 on Windows, in preparation of an LAC 2.0 installation. I had tried deleting the schema first, but that didn't work. After I removed the sys\global\security folder as well, it worked perfectly.
Thank you.

"The instillation process has encountered an error while installing shared technologies."

Basically, when ever I attempt download Adobe Premiere Elements 11 on my Windows Vista computer, half way through a message pops up saying "The instillation process has encountered an error while installing shared technologies. Please restart your system and try again."
Each time I insert the disc, I select trial version, in case I download the full version and it no longer lets me use my serial code.
Some one said the destination folder couldn't contain more then 250 characters, so I changed its location from 'C:\Program Files\Adobe\' to 'C:\' but it still came up with the same message!
I have downloaded the new Adobe Reader 10, but this makes no difference to the process.. no matter what I've tried it always comes up with the same message.
I also turn of my anti-virus software when installing Adobe Premiere Elements. Still this doesn't do the trick. And I've restarted my computer and tried downloading it and un-downloading it multiple times!
Every time the same message comes up, and I have no idea how to fix it... Its defiantly not my memory that is a problem, as I currently have 50GB free on my OS C:\ drive.
I also have QuickTime version 7.6.9, which is apparently needed?
If you know something I haven't tried that may work, or the problem causing this and a solution to the problem, please can you notify me, Thanks!

Refer to this:
Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows
Mylenium

Error while Installing Oracle Services for Microsoft Transaction Server

I downloaded "Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP" and installed the personal edition. It did not install successfully and gave this error message:
Error while Installing Oracle Services for Microsoft Transaction Server
The specified key was not found while trying to GetValue
- stop installation of all products.
- stop installation of this component only.
The installation of Oracle 9i Database was unsuccessful
The Integration tools and client installed just fine from the same download. Why didn't the database install successfully? All the other components seemed to install just fine and the database appeared to be created - but I could not open it and there was not start menu option for DBA Studio.
I am running Windows 2000 professional with Service Pack 3 on a 2 GHz Pentium4 machine with 512MB Rambus RAM, 32bit color graphics ATI All-in-Wonder card, about 40GB of disk space, a local peer-to-peer network via cat5 cable to another Win2k P3 machine, and Creative Soundblaster Audigy card. Do I need to adjust any network settings? Would it help or hinder if I installed MS IIS? WinNT has a Microsoft Transaction Server (MTS) but Win2k has COM+ instead; does that make a difference in terms of the installer looking for MTS? Do I need to configure COM+ in some special way / change settings?

HI Salman,
I am doing the following.
1. I am installing Oracle 10.2.01 Database(Not Client) on my windows Xp laptop. While installation i Choose the custom option and Check the Oracle Windows Interface. In that i check the "Install Oracle Services for Microsoft Transaction server" checkbox. The installation goes on fine till 99% and when it tries to install the
Oracle Services for Microsoft Transaction server it gives an error saying that "Microsoft Transaction server" was not found on the system.
I had previously installed the same on my laptop and it was working fine. but after uninstallation when i try to re install i get this problem.
If i go to the services.msc option in windows i still see the OracleMTSRecoveryService option even when i have uninstalled oracle. But when i try to start the services i get the following error
Could Not start the OracleMTSRecoveryService on the local computer.
Error 3: The system cannot find the file specified.
Any help on how to resolve this issue will be highly appreciated

Getting an Error while installing Microsoft Visual Studio 2013

Hi team
I am getting an error while installing Microsoft Visual Studio 2013
PFB error : this version of visual studio requires a computer with a never version of windows
P.S. I am having Windows 7 64 bit processor , van you please advise ASAP

Hi Kanchan Gandhi,
A similar issue is addressed here, hope it’s helpful.
http://social.msdn.microsoft.com/Forums/vstudio/en-US/127869c4-7e00-450d-b7fc-1b3cd11ebf07/this-version-of-visual-studio-requires-a-computer-with-a-newer-version-of-windows?forum=vssetup
This is system requirement of Visual Studio 2013:
http://www.visualstudio.com/products/visual-studio-2013-compatibility-vs
If there is anything I can do for you regarding this issue, feel free to post back.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

SETUP ERROR WHILE INSTALLING SQL SERVER 2008 R2

Hi ,
I'm coming across the following error while installing Microsoft SQL Server 2008R2
SQL Server Setup has encountered the following error:
The required MSI package 'D:\SQL Sever 2008 R2 Developer Edition\x86\setup\sql_engine_core_shared_msi\sql_engine_core_shared.msi' doesn't exist.
Error code 0x84B20001.
I tried reinstalling the same. But results the same.
Please suggest. :)

Overall summary:
Final result:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal):           -2068709375
Exit facility code:            1202
Exit error code:               1
Exit message:                  The required MSI package 'D:\softwares\SQL Sever 2008 R2 Developer Edition\x86\setup\sql_engine_core_shared_msi\sql_engine_core_shared.msi'
doesn't exist.
Start time:                    2013-12-31 20:47:50
End time:                      2013-12-31 20:55:44
Requested action:              Install
Log with failure:              C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131231_204629\Detail.txt
Exception help link:           http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.1600.1%26EvtType%3d0xD2FD83B3%400xC2B0B50B%401202%401
Machine Properties:
Machine name:                  SAMPLE-PC
Machine processor count:       2
OS version:                    Windows 7
OS service pack:
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x86
Process architecture:          32 Bit
OS clustered:                  No
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered
Sql Server 2005
Tools                                    1033
Express Edition      9.2.3042        No
Sql Server 2005
ToolsClient                              1033
Express Edition      9.2.3042        No
Sql Server 2005
ToolsClient\Connectivity                 1033                 Express Edition
9.2.3042        No
Sql Server 2008      SQLEXPRESS           MSSQL10.SQLEXPRESS             Database Engine Services
1033                 Express Edition      10.1.2531.0     No
Sql Server 2008      SQLEXPRESS           MSSQL10.SQLEXPRESS             SQL Server Replication
1033                 Express Edition      10.1.2531.0     No
Package properties:
Description:                   SQL Server Database Services 2008 R2
ProductName:                   SQL Server 2008 R2
Type:                          RTM
Version:                       10
SPLevel:                       0
Installation location:         D:\softwares\SQL Sever 2008 R2 Developer Edition\x86\setup\
Installation edition:          DEVELOPER
User Input Settings:
ACTION:                        Install
ADDCURRENTUSERASSQLADMIN:      False
AGTSVCACCOUNT:                 TEST
AGTSVCPASSWORD:                *****
AGTSVCSTARTUPTYPE:             Manual
ASBACKUPDIR:                   C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Backup
ASCOLLATION:                   Latin1_General_CI_AS
ASCONFIGDIR:                   C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Config
ASDATADIR:                     C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Data
ASDOMAINGROUP:                 <empty>
ASLOGDIR:                      C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Log
ASPROVIDERMSOLAP:              1
ASSVCACCOUNT:                  TEST
ASSVCPASSWORD:                 *****
ASSVCSTARTUPTYPE:              Automatic
ASSYSADMINACCOUNTS:            SAMPLE-PC\SAMPLE
ASTEMPDIR:                     C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Temp
BROWSERSVCSTARTUPTYPE:         Automatic
CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131231_204629\ConfigurationFile.ini
CUSOURCE:
ENABLERANU:                    False
ENU:                           True
ERRORREPORTING:                False
FARMACCOUNT:                   <empty>
FARMADMINPORT:                 0
FARMPASSWORD:                  *****
FEATURES:                      SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,SSMS,ADV_SSMS
FILESTREAMLEVEL:               0
FILESTREAMSHARENAME:           <empty>
FTSVCACCOUNT:                  NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD:                 *****
HELP:                          False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS:              False
INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR:           C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR:             <empty>
INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
INSTANCEID:                    TEST
INSTANCENAME:                  TEST
ISSVCACCOUNT:                  TEST
ISSVCPASSWORD:                 *****
ISSVCSTARTUPTYPE:              Automatic
NPENABLED:                     0
PASSPHRASE:                    *****
PCUSOURCE:
PID:                           *****
QUIET:                         False
QUIETSIMPLE:                   False
ROLE:                          <empty>
RSINSTALLMODE:                 DefaultNativeMode
RSSVCACCOUNT:                  SAMPLE-PC\TEST
RSSVCPASSWORD:                 *****
RSSVCSTARTUPTYPE:              Automatic
SAPWD:                         *****
SECURITYMODE:                  <empty>
SQLBACKUPDIR:                  <empty>
SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT:                 TEST
SQLSVCPASSWORD:                *****
SQLSVCSTARTUPTYPE:             Automatic
SQLSYSADMINACCOUNTS:           SAMPLE-PC\SAMPLE
SQLTEMPDBDIR:                  <empty>
SQLTEMPDBLOGDIR:               <empty>
SQLUSERDBDIR:                  <empty>
SQLUSERDBLOGDIR:               <empty>
SQMREPORTING:                  False
TCPENABLED:                    0
UIMODE:                        Normal
X86:                           False
Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131231_204629\ConfigurationFile.ini
Detailed results:
Feature:                       Database Engine Services
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Feature:                       SQL Server Replication
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Full-Text Search
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Analysis Services
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Reporting Services
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Integration Services
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Client Tools Connectivity
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Management Tools - Complete
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Management Tools - Basic
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Client Tools SDK
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Client Tools Backwards Compatibility
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Business Intelligence Development Studio
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131231_204629\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.ChainerInvalidOperationException
    Message:
        The required MSI package 'D:\softwares\SQL Sever 2008 R2 Developer Edition\x86\setup\sql_engine_core_shared_msi\sql_engine_core_shared.msi' doesn't exist.
    Data:
      ChainerInvalidOperationExceptionData = InstallPackage
      DisableWatson = true
    Stack:
        at Microsoft.SqlServer.Configuration.SetupExtension.MsiInstallEngineActionBehavior.ModifyAction(String installedProductCode, String installedProductVersion, String pathOfPackageOnMedia, InstallAction pkgAction)
        at Microsoft.SqlServer.Configuration.SetupExtension.MSIInstallerEngine.InstallPackage(PackageId pkg, InstallAction pkgAction)
        at Microsoft.SqlServer.Configuration.MsiExtension.PackageInstallAction.Execute(String actionId, TextWriter errorStream)
        at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)

Getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit

Hi,
I am getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit. I have already tried all option but fail to installation
an error during the installation of assembly micro soft.vc80.crt

Hi,
I am getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit. I have already tried all option but fail to installation
an error during the installation of assembly micro soft.vc80.crt
Can you please post summary.txt file here.Below link will help you in finding it.
http://technet.microsoft.com/en-us/library/ms143702(v=sql.105).aspx
Also with error you posted I guess it is a known issue .You need to install below package and then continue with fresh installation
http://www.microsoft.com/en-gb/download/details.aspx?id=15336
Please make sure before beginning fresh installation you make sure previous failed installation is removed completely.Use add remove program to remove failed SQL Server.If yu still face issue please post summary.txt file here
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Error while Installing GUI .

Similar Messages

Maybe you are looking for