Error while installing IFRS Starter Kit in BO FC
Hi Experts,
We are trying to install Starter Kit for IFRS SP1 in BO FC version 7.5. We are following the steps in the installation guide.
However while running the SCAN task, we encounter an error : "Processing task SCAN - (error) ". The log shows that
the packets are extracted, but it is not able to generate the receive tasks. What is the possible cause of this error?
The product information of FC shows that "Build : 7.5.0.1021". How to find the service pack that is installed?
Thanks in advance.
Regards,
Shoba
Ok,
The problem is the following : You can only install IFRS packages in a non signed database. Yours is signed as 0000.TOP so it will not work. Even if the goal is to have IFRS packages installed + 0000.TOP signature.
You should do the following :
1. Create a new empty database.
2. Create a new Finance Datasource in CtAdmin.msc which point to the new DB
3. Initialize it as a CHILD DB (All task / Migrate).
4. Connect to the application with ADMIN account and verify that the DB signature is empty (if it's not the case, you will have to switch SQL initialization querries back to child behaviour and restart from step 1).
5. Copy IFRS packages and configure the transfer vector (folder destination).
6. Create and execute the SCAN task
7. Execute each reception task
8. Change DB Signature from 0000.ROLL-OUT to 0000.TOP (SQL querries are documented in the IFRS installation guide).
Good luck
Similar Messages
-
Error while installing ifrs starterkit for nw
I just installed the ifrs starter kit as mentioned in the installation document troughh bw.
it has been installed with errors relating the following dimensions: INTERCO,RPTCURRENCY and OWNACCOUNT.
Invalid attribute name (MBR__SEQ) in dimension (INTERCO)
Invalid attribute name (MBR__SEQ) in dimension (OWNACCOUNT)
Invalid attribute name (MBR__SEQ) in dimension (RPTCURRENCY)
and the log message indicates that INTERCO dimension has invalid mmbers.
Member (I_S000) of dimension (INTERCO) is not a valid member (there are several of this message)
i can access the appset trough bw and bpc and as i opened the INTERCO dimension it was empty. than tried to update it with the delivered dimension excelsheet (which appears on my pc after extracting the file) bpc sends an error message as i try to process this dimension.
the message is "Invalid attribute name (MBR__SEQ) in dimension (INTERCO)"
on the excel client the templates can be opened but data send does not work.
has any one else had same problems? what can be the reason?
thanksrefer to note 1569986 trough https://websmp202.sap-ag.de/notes
you should also be sure that your Apshell is installed correctly and your system is running correct. you can chek the structure of any of your appset trough SA38 by running UJA_DATA_CHECKER.
THESE STEPS SHOULD RESOLVE YOUR PROBLEM
BEST REGARDS
In NetWeaver, run transaction SA38.
Enter in the Program: UJA_MIGRATE_MBR_SEQ
Click the Execute button.
Manually enter in the APPSET(in your case the name of ifrs kit) name and Dimension name and click Execute. Please note, if you leave the Dimension field blank, all dimensions for that appset will be checked for MBR_SEQ and the attribuite will be added as needed.
While this is running, you will see status updates in the bottom left hand corner. Once the process completes, you will get a message:
Member sequence was added to dimension <Dimension>
NOTE: The APPSET name is case sensitive and are listed in the APPSET_ID column of table UJA_APPSET_INFO. For example, ApShell and APSHELL are not the same Application Set (AppSet).
If you do not have the program UJA_MIGRATE_MBR_SEQ, please see note 1563414. -
Error while Installing and Starting SAP Widget Development Tools
Hi All,
I have downloaded Eclipse: eclipse-SDK-3.3.2-win32.zip from http://www.eclipse.org/downloads/download.php?file=/eclipse/downloads/drops/R-3.3.2-200802211800/eclipse-SDK-3.3.2-win32.zip
I am following the link: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c032ae0a-7d6b-2a10-14a1-cc6efb066dfc
for Installing and Starting SAP Widget Development Tools as an Eclipse Plug-in
I am very new to it, So I was following Step by Step procedure.
On the 16th step I am getting an error:
AP Widget Templates (0.12.0.1167) requires feature "org.eclipse.gef (3.3.0)", or equivalent.
I had download the SAP Widget Development Tools.zip file from https://www.sdn.sap.com/irj/sdn/downloads?rid=/webcontent/uuid/b03b6544-c741-2a10-8999-ed04eb2b2c71
While unzipping the eclipse-SDK-3.3.2-win32.zip, there were two errors:
The System cannot find the file specified &
The file name or extension is too long.
I ignored them and continued the unzipping.
Please guide me as to how we can solve this error.
Ankur
Is it because I am using Eclipse 3.3.2 and not 3.3.0? If yes from where I can download Eclipse 3.3.0
Edited by: ankur malhotra on Jul 25, 2008 7:36 AMHi Ankur,
This happens sometimes because of the Eclipse that you use. Download the Eclipse JEE Version. When you go to eclipse.org and try to download eclipse you can do a comparision of the versions there, You download the version which supports all the web features.
http://www.eclipse.org/downloads/packages/eclipse-ide-java-ee-developers/ganymeder
Check the above link you will be able to see the package details. Please download this Java IDE for EE developers and try installing the SAP widgets foundation then, If you are facing any problems in installing the plugins thru local archived site please let me know.
Regards,
Sai -
Error while installing SAP integration kit 3.1
Hi,
I installed SAP integration kit 3.1 on one server and it is working fine but when i am installing same installable on another server it is giving error as "Installation ended prematuarly because of an error". I dont know how to debug the error. Please help me.
Thamnks in advanceHi Sonali,
had a similar problem on a Windows/Tomcat system. The installation was crashing before trying to deploy the .jar files. If you are facing the problem in a similar environment please make sure that you have copied the librfc32.dll and the sapjco.jar files in the correct directories. Especially for sapjco.jar doublecheck the path you have copied the file into.
Regards,
Stratos -
Error while installing Migration Tool kit for SAP BPC7.0
Hi all,
We are implementing SAP Business Planning and Consolidation Migration Process to BPC 7.0.
We are trying to installin Migration Tool Kit. In this kit we are having two set up files - one for BPCMigrationClient and another for BPCMigrationServer.
When i am trying to install the BPCMigrationServer set up file it diaplays a screen which says - Enter the service type accounts.- it has the following items - 1. System Admin ID, 2. password, 3. Admin ID, 4. Admin Password, 5. User ID, 6. User Password.
1. System Admin ID already has the id ( through which i have logged on to the system). This option is non editable.
2. password: gives option to type in the password.
3, 4, 5, 6 options are disabled and are blank. we are not able to edit them or write anything in them.
After entering the password when clicked on next , it gives us message saying Invalid Admin ID (3). But the problem here is that the 3,4,5 and 6 options are disabled. We cannot write anything in them. We are not able to install the migration tool kit because of this.
Can anyone help us out in solving this issue.
Thanks,
MadhavCAn you precise also what Migration tool are you using?
Migration from 5.1 to SAP BPC 7.0 NW?
In that case when you are speaking about the installation about what part are you speaking?
I think actually you are speaking about the migration tool from 4.2 to 7.0 Microsoft version .
In that case you can install the mIgration tool just with SAP BPC sys admin users and you have to input the password for that user. Sys admin user for BPC is usually the user used for installation of SAP BPC server.
Any way I suggest to follow the Migration tool training document and there you will find all the information necessary.
Regards
Sorin Radulescu -
Error while installing OWB
after 50% install.. it says
"Error in writing to file c:\oracle\ora9201\bin\oci.dll
The process cannot access the file because it is being used by another process"
Apparently I have restarted the workstation and closed all oracle related services in services and no other program is running expect the installer.
Can any one help in resolving the issue. Or can I hit the ignore button and continue installing?Always install OWB into a new ORACLE_HOME unless the Installation and Configuration Guide states otherwise. This has only happened twice. OWB 9.0.2.62.3 was the last version to allow installation into an existing ORACLE_HOME. Another thing you can do is go to www.sysinternals.com and download the utility LISTDLLs. It is great. From a command prompt, start it with the syntax: listdlls >log.txt
This will output the DLLs in use and which executable is using it. Search for the DLL in the log.txt and scroll up until the double line. The executable name locking the DLL will be above the double line. If you have the Microsoft Distributed Transaction Coordinator Service running on the client, it will lock Oracle DLLs. This has been a common issue in the past, going back to the days of Data Mart Suite. This was documented in the Release Notes for it and may still be in the system in a note somewhere. It is in: DMS: Unable To Install; Filesopen/Service Running On Compaq Server Doc ID: Note:1080977.6 and Certain Files which need to be Reinstalled are Being Used Doc ID: Note:117672.1
The first note I wrote back before 2000.
Barry -
Error while Installing Oracle Services for Microsoft Transaction Server
I downloaded "Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP" and installed the personal edition. It did not install successfully and gave this error message:
Error while Installing Oracle Services for Microsoft Transaction Server
The specified key was not found while trying to GetValue
- stop installation of all products.
- stop installation of this component only.
The installation of Oracle 9i Database was unsuccessful
The Integration tools and client installed just fine from the same download. Why didn't the database install successfully? All the other components seemed to install just fine and the database appeared to be created - but I could not open it and there was not start menu option for DBA Studio.
I am running Windows 2000 professional with Service Pack 3 on a 2 GHz Pentium4 machine with 512MB Rambus RAM, 32bit color graphics ATI All-in-Wonder card, about 40GB of disk space, a local peer-to-peer network via cat5 cable to another Win2k P3 machine, and Creative Soundblaster Audigy card. Do I need to adjust any network settings? Would it help or hinder if I installed MS IIS? WinNT has a Microsoft Transaction Server (MTS) but Win2k has COM+ instead; does that make a difference in terms of the installer looking for MTS? Do I need to configure COM+ in some special way / change settings?HI Salman,
I am doing the following.
1. I am installing Oracle 10.2.01 Database(Not Client) on my windows Xp laptop. While installation i Choose the custom option and Check the Oracle Windows Interface. In that i check the "Install Oracle Services for Microsoft Transaction server" checkbox. The installation goes on fine till 99% and when it tries to install the
Oracle Services for Microsoft Transaction server it gives an error saying that "Microsoft Transaction server" was not found on the system.
I had previously installed the same on my laptop and it was working fine. but after uninstallation when i try to re install i get this problem.
If i go to the services.msc option in windows i still see the OracleMTSRecoveryService option even when i have uninstalled oracle. But when i try to start the services i get the following error
Could Not start the OracleMTSRecoveryService on the local computer.
Error 3: The system cannot find the file specified.
Any help on how to resolve this issue will be highly appreciated -
SETUP ERROR WHILE INSTALLING SQL SERVER 2008 R2
Hi ,
I'm coming across the following error while installing Microsoft SQL Server 2008R2
SQL Server Setup has encountered the following error:
The required MSI package 'D:\SQL Sever 2008 R2 Developer Edition\x86\setup\sql_engine_core_shared_msi\sql_engine_core_shared.msi' doesn't exist.
Error code 0x84B20001.
I tried reinstalling the same. But results the same.
Please suggest. :)Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068709375
Exit facility code: 1202
Exit error code: 1
Exit message: The required MSI package 'D:\softwares\SQL Sever 2008 R2 Developer Edition\x86\setup\sql_engine_core_shared_msi\sql_engine_core_shared.msi'
doesn't exist.
Start time: 2013-12-31 20:47:50
End time: 2013-12-31 20:55:44
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131231_204629\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.1600.1%26EvtType%3d0xD2FD83B3%400xC2B0B50B%401202%401
Machine Properties:
Machine name: SAMPLE-PC
Machine processor count: 2
OS version: Windows 7
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2005
Tools 1033
Express Edition 9.2.3042 No
Sql Server 2005
ToolsClient 1033
Express Edition 9.2.3042 No
Sql Server 2005
ToolsClient\Connectivity 1033 Express Edition
9.2.3042 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services
1033 Express Edition 10.1.2531.0 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication
1033 Express Edition 10.1.2531.0 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: D:\softwares\SQL Sever 2008 R2 Developer Edition\x86\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: TEST
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: TEST
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: SAMPLE-PC\SAMPLE
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131231_204629\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: TEST
INSTANCENAME: TEST
ISSVCACCOUNT: TEST
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: SAMPLE-PC\TEST
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: TEST
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: SAMPLE-PC\SAMPLE
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131231_204629\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Analysis Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Integration Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131231_204629\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.ChainerInvalidOperationException
Message:
The required MSI package 'D:\softwares\SQL Sever 2008 R2 Developer Edition\x86\setup\sql_engine_core_shared_msi\sql_engine_core_shared.msi' doesn't exist.
Data:
ChainerInvalidOperationExceptionData = InstallPackage
DisableWatson = true
Stack:
at Microsoft.SqlServer.Configuration.SetupExtension.MsiInstallEngineActionBehavior.ModifyAction(String installedProductCode, String installedProductVersion, String pathOfPackageOnMedia, InstallAction pkgAction)
at Microsoft.SqlServer.Configuration.SetupExtension.MSIInstallerEngine.InstallPackage(PackageId pkg, InstallAction pkgAction)
at Microsoft.SqlServer.Configuration.MsiExtension.PackageInstallAction.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun) -
Error while installing vCenter Server 6.0
Hello!
Got error while installing vCenter Server 6.0 on a Windows 2012 R2. During install pop-up said "An error occured while starting service 'invsvc'". What is the matter? Should I simply repeat the setup process? Few log files from big zip-file are attached. Please say what else files from the log pack you need. Thanks.Please refer following KB and see if you have any of those conditions matching in your win 2012 R2 machine. Correct them before you begin with reinstallation.
https://support.microsoft.com/en-us/kb/834484 -
Error while installing Sneak preview Netweaver 2004 --SP15 on WindowsXP+SP1
hi, i'm getting a error while installing the Sneak preview NetWeaver 2004-SP15 on Windows XP + SP1.
error message: Corrupt GZip trailer
JDK version: 1.4.2_08 and 1.4.2_09
i searched this error on google and i found it's a bug of jdk1.4.2_08.(see this page:<a href="http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4262583">http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4262583</a>) it said this version can't run when the uncompressed file is 2GB or larger. and this bug was fixed after <b>jdk1.5</b>. but i noted that Sneak preview was not tested on jdk1.5.Ignore it, i uninstalled jdk1.4.2_08 and Sneak preview,then i installed jdk1.5 and reinstalled Sneak preview.Unfortunated, i got another error.The error code is <b>3018</b>.
could anyone please help me?
Regards
boI faced this problem while I was installation.
Following are my installation's step, is there any problem?
1.I have a new system just for installation, it is WindowsXP + SP1(2.5G memory and 2 CPU);
2.download JDk 1.4.2_09 from sun.com and installed it;
3.download Sneak preview Netweaver2004SP15 from sdn.sap.com. There are 3 files total.
Two are NW04SneakPreviewSP15.rar, the other is DeveloperStudioSP15.rar;
4.uncompressed NW04SneakPreviewSP15.rar. I used winrar, it's OK.
5.start install NW04SneakPreviewSP15.rar step by step according to the installation guid.
6.to this step 'SAP J2EE Engine Server Core', all are right;
7.error in the step 'Load Java Database Content';
Following are part of the log file 'jload.java.log':
java version "1.4.2_09"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_09-b05)
Java HotSpot(TM) Client VM (build 1.4.2_09-b05, mixed mode)
2006-3-22 18:26:37 com.sap.inst.jload.Jload main
ÐÅÏ¢: Jload -sec J2E,jdbc/pool/J2E,C:usrsapJ2ESYSglobal/security/data/SecStore.properties,C:usrsapJ2ESYSglobal/security/data/SecStore.key -dataDir C:/backup/NW04SneakPreviewSP15/NWSneakPreviewSP15/SAP_NetWeaver_04_SR_1_Installation_MasterIM01_NT_I386....SneakPreviewContentJDMP -job C:Program Filessapinst_instdirNW04SR1WEBAS_COPYONE_HOST/IMPORT.XML -log C:Program Filessapinst_instdirNW04SR1WEBAS_COPYONE_HOST/jload.log
2006-3-22 18:26:40 com.sap.inst.jload.db.DBConnection connectViaSecureStore
ÐÅÏ¢: connected to J2E on jdbc/pool/J2E
2006-3-22 18:26:41 com.sap.inst.jload.JobStatus readStatus
ÐÅÏ¢: trying to read status file C:usrsapJ2EJC00j2eesltoolsIMPORT.sta
2006-3-22 18:26:41 com.sap.inst.jload.JobStatus readStatus
ÐÅÏ¢: status file IMPORT.sta doesn't exist - no restart
2006-3-22 18:26:41 com.sap.inst.jload.Jload dbImport
ÐÅÏ¢: trying to create table ADS_LICENSED_FORMS
2006-3-22 18:26:42 com.sap.inst.jload.Jload dbImport
ÐÅÏ¢: table ADS_LICENSED_FORMS created
2006-3-22 18:26:42 com.sap.inst.jload.Jload dbImport
ÐÅÏ¢: ADS_LICENSED_FORMS loaded (2 rows)
2006-3-22 18:48:58 com.sap.inst.jload.Jload dbImport
ÐÅÏ¢: trying to create table J2EE_CONFIGENTRY
2006-3-22 18:48:58 com.sap.inst.jload.Jload dbImport
ÐÅÏ¢: table J2EE_CONFIGENTRY created
2006-3-22 19:07:53 com.sap.inst.jload.Jload logStackTrace
ÑÏÖØ: java.io.IOException: Corrupt GZIP trailer
at java.util.zip.GZIPInputStream.readTrailer(GZIPInputStream.java:174)
at java.util.zip.GZIPInputStream.read(GZIPInputStream.java:89)
at java.util.zip.InflaterInputStream.read(InflaterInputStream.java:105)
at java.io.DataInputStream.readBoolean(DataInputStream.java:310)
at com.sap.inst.jload.db.FieldHandler.checkAndSetNullValue(FieldHandler.java:46)
at com.sap.inst.jload.db.BigIntHandler.setValue(TinyIntHandler.java:164)
at com.sap.inst.jload.db.DBTable.load(DBTable.java:274)
at com.sap.inst.jload.Jload.dbImport(Jload.java:323)
at com.sap.inst.jload.Jload.executeJob(Jload.java:397)
at com.sap.inst.jload.Jload.main(Jload.java:621)
2006-3-22 19:07:53 com.sap.inst.jload.db.DBConnection disconnect
ÐÅÏ¢: disconnected
I also tried jdk1.4.2_08 and I also installed in Windows2000+SP4. But I faced the same problem too.
From sun.com, I know this error is a bug of jdk. They explained that this version can't run OK
when zip-file is larger than 2G. Then I found here's a file
(name is 'NW04SneakPreviewSP15NWSneakPreviewSP15SneakPreviewContentSDMSDMKIT.JAR'). It's size
is 2.08G. I suppose installation can't manage it.
I tried unzip this file and renamed unziped folder to 'SDMKIT.JAR'.
Then I found another large file in the unziped folder(name is 'F:NW04SneakPreviewSP15NWSneakPreviewSP15SneakPreviewContentSDMSDMKIT.JARpackpackedRoot.jar')
, so I also unzip this file and renamed unziped folder to 'packedRoot.jar'.
Then I reinstalled, of course, It's no work.
Unexpectedly, I found this download link is not available on the sdn.sap.com(see this page:https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6).
It say that 'We apologize that this version is currently not available to download.'.
I guess there are any problem in this version, are there?
So, now I think I must download another version to install.
Thanks,
Bo
Message was edited by: bo zeng -
Error while installing 11gR1 RDBMS software on 11gR2 GI
I am getting the following error while installing 11gR1 (11.1.0.6) RDBMS software on 11gR2 GI.
0. Oracle Enterprise linux 5.4 x_86_64 bit
1. cluvfy verfication is successful
2. 11gR2 GI looks fine - logged in to asm in all nodes, check the asm disksgroups
3. ssh connectivity is fine - able to do ssh from all 6 nodes to all nodes
Error:
On the Install page, after setup successful stage, (it finised 57%), the pop-up messages says
"Error in execution of additional utility tool" and giving me the options to retry, skip or continue.
* I dont want to continue until i fixed this issue *
-- I wish Oracle tells me, what tool its failing
Here is the error from log file:
INFO: No of Tools: 1
INFO: Starting to execute the additional tools
INFO: Command = /u01/app/oracle/product/11.1.0/oracle/bin/diagsetup basedir=/u01/app/oracle localnode=tstdb1 nodelist=tstdb1,tstdb2,tstdb3,tstdb4,tstdb5,tstdb6 remotenodes=tstdb2,tstdb3,tstdb4,tstdb5,tstdb6 oraclehome=/u01/app/oracle/product/11.1.0/oracle
PRKC-1002 : All the submitted commands did not execute successfully
DiagSetup-00008: Diag Setup Usage error: unable to perform RAC operations
Command = /u01/app/oracle/product/11.1.0/oracle/bin/diagsetup has failed
Execution Error : PRKC-1002 : All the submitted commands did not execute successfully
oracle.ops.mgmt.cluster.RemoteFileOperationException: PRKC-1002 : All the submitted commands did not execute successfully
at oracle.ops.mgmt.cluster.ClusterCmd.transferDirToNodes(ClusterCmd.java:2570)
at oracle.ops.mgmt.cluster.ClusterCmd.transferDirToNodes(ClusterCmd.java:2375)
at oracle.diagfw.adr.diagsetup.DiagSetup.transferRacDirs(DiagSetup.java:418)
at oracle.diagfw.adr.diagsetup.DiagSetup.createDirs(DiagSetup.java:323)
at oracle.diagfw.adr.diagsetup.DiagSetup.executeMain(DiagSetup.java:263)
at oracle.diagfw.adr.diagsetup.DiagSetup.main(DiagSetup.java:226)
DiagSetup-00008: Diag Setup Usage error: unable to perform RAC operations
oracle.diagfw.adr.diagsetup.DiagSetupException: DiagSetup-00008: Diag Setup Usage error: unable to perform RAC operations
at oracle.diagfw.adr.diagsetup.DiagSetup.transferRacDirs(DiagSetup.java:434)
at oracle.diagfw.adr.diagsetup.DiagSetup.createDirs(DiagSetup.java:323)
at oracle.diagfw.adr.diagsetup.DiagSetup.executeMain(DiagSetup.java:263)
at oracle.diagfw.adr.diagsetup.DiagSetup.main(DiagSetup.java:226)
INFO: Complete execution of additional toolsHi Levi Pereira, Thanks for the link.
During install I got the below error
""Error in execution of additional utility tool" and I initially thought it might be because of network or due to user equivalence not set correct. So cancelled installation , rechecked it and verified and both were fine. user equivalence works fine. but still i'm getting the same error . However the below oracle documentation links shows that its a bug (reference Bug 6271506, though I couldnt get any relevant info on this bug number)
http://download.oracle.com/docs/cd/B28359_01/readmes.111/b28280/toc.htm
As per the above doc I just clicked on 'Continue' and installation was successful with no errors. I hope itdoesnt cause any issues later.
Your blog is quite nice . I have few questions on ASM , device mapper and multipathing , porbably I shall post few questions on ASM in your blog.
Thanks,
Sasi -
Error while installing the Oracle BI 10.1.3.3.1
Hi ,
I got the following error while installing 10.1.3.3.1 Oracle BI Suite .
[nQSError: 46036] Internal Assertion: Condition GetAdaptersinfo( pAdapterinfo.get(), &ulOutBufLen) == NO_ERROR, file .\Config\SUSystemConfig.cpp, line 1297.
while the installation shows it is completed successfully ..
but admin tool is not started ....
even the BI server also is down and says - process terminated unexpectedly ..
Please help me out in this regards ....HI Venkat ..
THanks for your response ....
No ..
The installaion doesnot succeed ....
Especially the admin tool installation is consistently throwing this error -
[nQSError: 46036] Internal Assertion: Condition GetAdaptersinfo( pAdapterinfo.get(), &ulOutBufLen) == NO_ERROR, file .\Config\SUSystemConfig.cpp, line 1297.
The services are runing fine ..
but I cannot enter to admin tool after installation ....
It is giving the same error as of installation ...
any remedies ??
Thanks and regards , -
Hi all,
i have an error while installing 10g in laptop which has already have 9i on it.
10g version was 10.2.0.3, i know it will not support in xp, but in other system which has xp it was working fine.
System details,
1GB Ram,Win XP Laptop.
Oracle 9i already installed.
when i clicked on 10.2.0.3 setup.exe i get OUI.exe has encountered a problem and needs to close.
that same oracle setup file is working fine in other win xp system, but in this laptop system it is not starting itself, beginning only i will give error as mentioned above.
software is present in c:\a\b\c\d\e folder, i shared only e folder and in other system i opened that file it is successfully opening. i don't know why it is not opening in this laptop.what may be the problem. what i should do to resolve this issue.
Please help me out,
Regards,
veeresh shi,
thanks for replying, actually that software has included with demantra product, that same 10.2.0.3 will work in other systems which as XP, i like to tell 1 thing,
that software is present inside many folders like c:\a...\b....\c....\d....\e.... in this folder the software is present, is this could be the issue.
i shared only e.... folder and from other system when i click on setup.exe the OUI will open only in this laptop it is not opening.
please suggest me
Regards,
veeresh.s -
Error while installing the named instance SQL 2012 Sp1
Hi,
I am getting below error while installing the named instance with features Data base engine. on same server box 2 named instance already installed and working...please suggest. i have done a lot of troubleshooting..(configure local system for Db engines
during installation, tried to install after another domain ID., repair and uninstalled existing and retried.) .. please s if i need to do anything else to resolve the issue.. installation account is domain admin account...
Can i rename the installation domain account profile from sql server that used for 2 named instance and for 3 rd named instance i am trying... is any impact after profile rename from the local sql server on any instance already configured...
Shailendra Devthanks alberto.
here is
2015-03-24 19:48:49.42 Server Microsoft SQL Server 2012 (SP1) - 11.0.3000.0 (X64)
Oct 19 2012 13:38:57
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
2015-03-24 19:48:49.42 Server (c) Microsoft Corporation.
2015-03-24 19:48:49.42 Server All rights reserved.
2015-03-24 19:48:49.42 Server Server process ID is 3460.
2015-03-24 19:48:49.42 Server System Manufacturer: 'Xen', System Model: 'HVM domU'.
2015-03-24 19:48:49.42 Server Authentication mode is WINDOWS-ONLY.
2015-03-24 19:48:49.42 Server Logging SQL Server messages in file 'D:\Program Files\Microsoft SQL Server\MSSQL11.SCSMDB\MSSQL\Log\ERRORLOG'.
2015-03-24 19:48:49.42 Server The service account is 'AIRWORKS\scadmin'. This is an informational message; no user action is required.
2015-03-24 19:48:49.42 Server Registry startup parameters:
-d D:\Program Files\Microsoft SQL Server\MSSQL11.SCSMDB\MSSQL\DATA\master.mdf
-e D:\Program Files\Microsoft SQL Server\MSSQL11.SCSMDB\MSSQL\Log\ERRORLOG
-l D:\Program Files\Microsoft SQL Server\MSSQL11.SCSMDB\MSSQL\DATA\mastlog.ldf
2015-03-24 19:48:49.42 Server Command Line Startup Parameters:
-s "SCSMDB"
-m "SqlSetup"
-T 4022
-T 4010
-T 1905
-T 3701
-T 8015
2015-03-24 19:48:49.69 Server SQL Server detected 1 sockets with 1 cores per socket and 2 logical processors per socket, 2 total logical processors; using 2 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2015-03-24 19:48:49.69 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2015-03-24 19:48:49.69 Server Detected 15624 MB of RAM. This is an informational message; no user action is required.
2015-03-24 19:48:49.69 Server Using conventional memory in the memory manager.
2015-03-24 19:48:49.98 Server Perfmon counters for resource governor pools and groups failed to initialize and are disabled.
2015-03-24 19:48:50.01 Server This instance of SQL Server last reported using a process ID of 5124 at 3/24/2015 7:48:48 PM (local) 3/24/2015 2:18:48 PM (UTC). This is an informational message only; no user action is required.
2015-03-24 19:48:50.03 Server Node configuration: node 0: CPU mask: 0x0000000000000003:0 Active CPU mask: 0x0000000000000003:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2015-03-24 19:48:50.07 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2015-03-24 19:48:50.30 Server Database Mirroring Transport is disabled in the endpoint configuration.
2015-03-24 19:48:50.58 spid5s Warning ******************
2015-03-24 19:48:50.65 spid5s SQL Server started in single-user mode. This an informational message only. No user action is required.
2015-03-24 19:48:50.66 spid5s Starting up database 'master'.
2015-03-24 19:48:50.90 spid5s 9 transactions rolled forward in database 'master' (1:0). This is an informational message only. No user action is required.
2015-03-24 19:48:51.04 Server CLR version v4.0.30319 loaded.
2015-03-24 19:48:51.17 spid5s 0 transactions rolled back in database 'master' (1:0). This is an informational message only. No user action is required.
2015-03-24 19:48:51.17 spid5s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2015-03-24 19:48:51.39 Server Software Usage Metrics is enabled.
2015-03-24 19:48:51.81 spid5s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2015-03-24 19:48:51.83 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2015-03-24 19:48:51.86 spid5s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2015-03-24 19:48:52.02 spid5s SQL Trace ID 1 was started by login "sa".
2015-03-24 19:48:52.16 spid5s Server name is 'AWISCDB\SCSMDB'. This is an informational message only. No user action is required.
2015-03-24 19:48:52.35 spid12s The certificate [Cert Hash(sha1) "151C8B90A9A8AF12F5EFAE3439F691E2C01A7355"] was successfully loaded for encryption.
2015-03-24 19:48:52.35 spid12s Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\SCSMDB ].
2015-03-24 19:48:52.40 spid12s Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the trace flag 7806.
This is an informational message only. No user action is required.
2015-03-24 19:48:52.43 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Windows return code: 0x490, state: 16. Failure to register a SPN might cause integrated
authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually registered.
2015-03-24 19:48:52.45 Server SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not be possible until a SPN is registered for the SQL Server service. This is an informational
message. No user action is required.
2015-03-24 19:48:54.03 Server The SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [ MSSQLSvc/AWISCDB.AIRWORKS.IN:SCSMDB ] for the SQL Server service.
2015-03-24 19:48:54.03 spid14s A new instance of the full-text filter daemon host process has been successfully started.
2015-03-24 19:48:54.86 spid6s Starting up database 'mssqlsystemresource'.
2015-03-24 19:48:54.86 spid5s Starting up database 'msdb'.
2015-03-24 19:48:54.87 spid6s The resource database build version is 11.00.3000. This is an informational message only. No user action is required.
2015-03-24 19:48:55.21 spid5s 12 transactions rolled forward in database 'msdb' (4:0). This is an informational message only. No user action is required.
2015-03-24 19:48:55.32 spid5s 0 transactions rolled back in database 'msdb' (4:0). This is an informational message only. No user action is required.
2015-03-24 19:48:55.32 spid6s Starting up database 'model'.
2015-03-24 19:48:55.32 spid5s Recovery is writing a checkpoint in database 'msdb' (4). This is an informational message only. No user action is required.
2015-03-24 19:48:55.72 spid6s Clearing tempdb database.
2015-03-24 19:48:57.22 spid6s Starting up database 'tempdb'.
2015-03-24 19:48:59.04 spid5s Database 'master' is upgrading script 'msdb110_upgrade.sql' from level 184551476 to level 184552376.
2015-03-24 19:48:59.04 spid5s ----------------------------------
2015-03-24 19:48:59.04 spid5s Starting execution of PRE_MSDB.SQL
2015-03-24 19:48:59.04 spid5s ----------------------------------
2015-03-24 19:49:00.23 spid5s Setting database option COMPATIBILITY_LEVEL to 100 for database 'msdb'.
2015-03-24 19:49:00.57 spid5s -----------------------------------------
2015-03-24 19:49:00.57 spid5s Starting execution of PRE_SQLAGENT100.SQL
2015-03-24 19:49:00.57 spid5s -----------------------------------------
2015-03-24 19:49:00.61 spid5s Setting database option COMPATIBILITY_LEVEL to 110 for database 'msdb'.
2015-03-24 19:49:00.73 spid5s Configuration option 'allow updates' changed from 1 to 1. Run the RECONFIGURE statement to install.
2015-03-24 19:49:00.73 spid5s Configuration option 'allow updates' changed from 1 to 1. Run the RECONFIGURE statement to install.
2015-03-24 19:49:01.78 spid5s Attempting to load library 'xpstar.dll' into memory. This is an informational message only. No user action is required.
2015-03-24 19:49:01.79 spid5s Using 'xpstar.dll' version '2011.110.3000' to execute extended stored procedure 'xp_instance_regread'. This is an informational message only; no user action is required.
2015-03-24 19:49:01.80 spid5s DBCC TRACEOFF 1717, server process ID (SPID) 5. This is an informational message only; no user action is required.
2015-03-24 19:49:01.80 spid5s DBCC execution completed. If DBCC printed error messages, contact your system administrator.
2015-03-24 19:49:01.81 spid5s
2015-03-24 19:49:01.81 spid5s Creating table temp_sysjobschedules
2015-03-24 19:49:01.91 spid5s
2015-03-24 19:49:01.91 spid5s Alter table sysdownloadlist...
2015-03-24 19:49:01.92 spid5s
2015-03-24 19:49:01.92 spid5s Alter table sysjobhistory...
2015-03-24 19:49:01.92 spid5s
2015-03-24 19:49:01.92 spid5s Alter table systargetservers...
2015-03-24 19:49:01.92 spid5s
2015-03-24 19:49:01.92 spid5s Alter table sysjobsteps...
2015-03-24 19:49:01.99 spid5s Configuration option 'allow updates' changed from 1 to 0. Run the RECONFIGURE statement to install.
2015-03-24 19:49:01.99 spid5s Configuration option 'allow updates' changed from 1 to 0. Run the RECONFIGURE statement to install.
2015-03-24 19:49:01.99 spid5s
2015-03-24 19:49:01.99 spid5s -----------------------------------------
2015-03-24 19:49:01.99 spid5s Execution of PRE_SQLAGENT100.SQL complete
2015-03-24 19:49:01.99 spid5s -----------------------------------------
2015-03-24 19:49:02.01 spid5s DMF pre-upgrade steps...
2015-03-24 19:49:02.13 spid5s DC pre-upgrade steps...
2015-03-24 19:49:02.13 spid5s Check if Data collector config table exists...
2015-03-24 19:49:02.13 spid5s Data Collector state before upgrade: 0
2015-03-24 19:49:02.13 spid5s pre_dc100::Check if syscollector_collection_sets_internal table exists...
2015-03-24 19:49:02.13 spid5s pre_dc100::Capturing Collection set status in temp table...
2015-03-24 19:49:02.19 spid5s Deleting cached auto-generated T-SQL Data Collection packages from msdb...
2015-03-24 19:49:02.19 spid5s End of DC pre-upgrade steps.
2015-03-24 19:49:02.19 spid5s DAC pre-upgrade steps...
2015-03-24 19:49:02.19 spid5s Starting DAC pre-upgrade steps ...
2015-03-24 19:49:02.19 spid5s End of DAC pre-upgrade steps.
2015-03-24 19:49:02.19 spid5s ----------------------------------
2015-03-24 19:49:02.19 spid5s Starting execution of MSDB.SQL
2015-03-24 19:49:02.19 spid5s ----------------------------------
2015-03-24 19:49:02.23 spid5s Configuration option 'allow updates' changed from 0 to 1. Run the RECONFIGURE statement to install.
2015-03-24 19:49:02.23 spid5s Configuration option 'allow updates' changed from 0 to 1. Run the RECONFIGURE statement to install.
2015-03-24 19:49:02.27 spid5s Checking the size of MSDB...
2015-03-24 19:49:02.53 spid5s
2015-03-24 19:49:02.53 spid5s Setting database option TRUSTWORTHY to ON for database 'msdb'.
2015-03-24 19:49:02.53 spid5s Setting database option RECOVERY to SIMPLE for database 'msdb'.
2015-03-24 19:49:02.64 spid5s ----------------------------------
2015-03-24 19:49:02.64 spid5s Finished execution of MSDB.SQL
2015-03-24 19:49:02.64 spid5s ----------------------------------
2015-03-24 19:49:02.64 spid5s -----------------------------------------
2015-03-24 19:49:02.64 spid5s Starting execution of MSDB_VERSIONING.SQL
2015-03-24 19:49:02.64 spid5s -----------------------------------------
2015-03-24 19:49:02.64 spid5s -----------------------------------------
2015-03-24 19:49:02.64 spid5s Finished execution of MSDB_VERSIONING.SQL
2015-03-24 19:49:02.64 spid5s -----------------------------------------
2015-03-24 19:49:02.64 spid5s Dropping view MSdatatype_mappings...
2015-03-24 19:49:02.65 spid5s Dropping view sysdatatypemappings...
2015-03-24 19:49:02.65 spid5s Dropping table MSdbms_datatype_mapping...
2015-03-24 19:49:02.66 spid5s Dropping table MSdbms_map...
2015-03-24 19:49:02.67 spid5s Dropping table MSdbms_datatype...
2015-03-24 19:49:02.67 spid5s Dropping table MSdbms...
2015-03-24 19:49:02.73 spid5s Creating table MSdbms
2015-03-24 19:49:02.75 spid5s Creating table MSdbms_datatype
2015-03-24 19:49:03.01 spid5s Creating table MSdbms_map
2015-03-24 19:49:03.02 spid5s Creating table MSdbms_datatype_mapping
2015-03-24 19:49:03.03 spid5s Definining default datatype mappings
2015-03-24 19:49:03.04 spid5s Creating datatype mappings for MSSQLSERVER to ORACLE8
2015-03-24 19:49:03.21 spid5s Creating datatype mappings for MSSQLSERVER to ORACLE9
2015-03-24 19:49:03.29 spid5s Creating datatype mappings for MSSQLSERVER to ORACLE10
2015-03-24 19:49:03.37 spid5s Creating datatype mappings for MSSQLSERVER to ORACLE11
2015-03-24 19:49:03.46 spid5s Creating datatype mappings for MSSQLSERVER to DB2
2015-03-24 19:49:03.54 spid5s Creating datatype mappings for MSSQLSERVER to SYBASE
2015-03-24 19:49:03.62 spid5s Creating datatype mappings for ORACLE8 to MSSQLSERVER
2015-03-24 19:49:03.71 spid5s Creating datatype mappings for ORACLE9 to MSSQLSERVER
2015-03-24 19:49:03.83 spid5s Creating datatype mappings for ORACLE10 to MSSQLServer
2015-03-24 19:49:03.95 spid5s Creating datatype mappings for ORACLE11 to MSSQLServer
2015-03-24 19:49:04.08 spid5s Creating view MSdatatype_mappings
2015-03-24 19:49:04.08 spid5s Creating view sysdatatypemappings
2015-03-24 19:49:05.08 spid5s
2015-03-24 19:49:05.08 spid5s Creating table syssubsystems...
2015-03-24 19:49:05.09 spid5s
2015-03-24 19:49:05.09 spid5s Creating view sysproxyloginsubsystem_view...
2015-03-24 19:49:05.11 spid5s
2015-03-24 19:49:05.11 spid5s Creating trigger trig_sysoriginatingservers_delete...
2015-03-24 19:49:05.11 spid5s
2015-03-24 19:49:05.11 spid5s Creating view sysoriginatingservers_view...
2015-03-24 19:49:05.12 spid5s
2015-03-24 19:49:05.12 spid5s Creating trigger trig_sysjobs_insert_update...
2015-03-24 19:49:05.13 spid5s
2015-03-24 19:49:05.13 spid5s Creating view sysjobs_view...
2015-03-24 19:49:05.15 spid5s
2015-03-24 19:49:05.15 spid5s Creating trigger trig_sysschedules_insert_update...
2015-03-24 19:49:05.16 spid5s
2015-03-24 19:49:05.16 spid5s Creating view sysschedules_localserver_view...
2015-03-24 19:49:05.21 spid5s
2015-03-24 19:49:05.21 spid5s Creating view systargetservers_view...
2015-03-24 19:49:05.23 spid5s
2015-03-24 19:49:05.23 spid5s Creating view sysalerts_performance_counters_view...
2015-03-24 19:49:05.25 spid5s
2015-03-24 19:49:05.25 spid5s Creating function SQLAGENT_SUSER_SNAME ...
2015-03-24 19:49:05.25 spid5s
2015-03-24 19:49:05.25 spid5s Creating function SQLAGENT_SUSER_SID ...
2015-03-24 19:49:05.26 spid5s
2015-03-24 19:49:05.26 spid5s Creating procedure SP_SQLAGENT_IS_SRVROLEMEMBER...
2015-03-24 19:49:05.27 spid5s
2015-03-24 19:49:05.27 spid5s Creating procedure sp_verify_category_identifiers...
2015-03-24 19:49:05.27 spid5s
2015-03-24 19:49:05.27 spid5s Creating function agent_datetime...
2015-03-24 19:49:05.27 spid5s
2015-03-24 19:49:05.27 spid5s Creating procedure sp_verify_proxy_identifiers...
2015-03-24 19:49:05.28 spid5s
2015-03-24 19:49:05.28 spid5s Creating procedure sp_verify_credential_identifiers...
2015-03-24 19:49:05.29 spid5s
2015-03-24 19:49:05.29 spid5s Creating procedure sp_verify_subsystems...
2015-03-24 19:49:05.30 spid5s
2015-03-24 19:49:05.30 spid5s Creating procedure sp_verify_subsystem_identifiers...
2015-03-24 19:49:05.30 spid5s
2015-03-24 19:49:05.30 spid5s Creating procedure sp_verify_login_identifiers...
2015-03-24 19:49:05.31 spid5s
2015-03-24 19:49:05.31 spid5s Creating procedure sp_verify_proxy...
2015-03-24 19:49:05.31 spid5s
2015-03-24 19:49:05.31 spid5s Creating procedure sp_add_proxy...
2015-03-24 19:49:05.32 spid5s
2015-03-24 19:49:05.32 spid5s Creating procedure sp_delete_proxy...
2015-03-24 19:49:05.32 spid5s
2015-03-24 19:49:05.32 spid5s Creating procedure sp_update_proxy...
2015-03-24 19:49:05.33 spid5s
2015-03-24 19:49:05.33 spid5s Creating procedure sp_sqlagent_is_member...
2015-03-24 19:49:05.33 spid5s
2015-03-24 19:49:05.33 spid5s Creating procedure sp_verify_proxy_permissions...
2015-03-24 19:49:05.34 spid5s
2015-03-24 19:49:05.34 spid5s Creating procedure sp_help_proxy...
2015-03-24 19:49:05.35 spid5s
2015-03-24 19:49:05.35 spid5s Creating procedure sp_get_proxy_properties...
2015-03-24 19:49:05.36 spid5s
2015-03-24 19:49:05.36 spid5s Creating procedure sp_grant_proxy_to_subsystem...
2015-03-24 19:49:05.36 spid5s
2015-03-24 19:49:05.36 spid5s Creating procedure sp_grant_login_to_proxy...
2015-03-24 19:49:05.37 spid5s
2015-03-24 19:49:05.37 spid5s Creating procedure sp_revoke_login_from_proxy...
2015-03-24 19:49:05.37 spid5s
2015-03-24 19:49:05.37 spid5s Creating procedure sp_revoke_proxy_from_subsystem...
2015-03-24 19:49:05.38 spid5s
2015-03-24 19:49:05.38 spid5s Creating procedure sp_enum_proxy_for_subsystem...
2015-03-24 19:49:05.38 spid5s
2015-03-24 19:49:05.38 spid5s Creating procedure sp_enum_login_for_proxy...
2015-03-24 19:49:05.39 spid5s
2015-03-24 19:49:05.39 spid5s Creating procedure sp_reassign_proxy...
2015-03-24 19:49:05.40 spid5s
2015-03-24 19:49:05.40 spid5s Creating procedure sp_sqlagent_get_startup_info...
2015-03-24 19:49:05.41 spid5s
2015-03-24 19:49:05.41 spid5s Creating procedure sp_sqlagent_update_agent_xps...
2015-03-24 19:49:05.42 spid5s
2015-03-24 19:49:05.42 spid5s Creating procedure sp_sqlagent_has_server_access...
2015-03-24 19:49:05.45 spid5s
2015-03-24 19:49:05.45 spid5s Creating procedure sp_sqlagent_get_perf_counters...
2015-03-24 19:49:05.46 spid5s
2015-03-24 19:49:05.46 spid5s Creating procedure sp_sqlagent_notify...
2015-03-24 19:49:05.47 spid5s
2015-03-24 19:49:05.47 spid5s Creating procedure sp_is_sqlagent_starting...
2015-03-24 19:49:05.47 spid5s
2015-03-24 19:49:05.47 spid5s Creating procedure sp_verify_job_identifiers...
2015-03-24 19:49:05.48 spid5s
2015-03-24 19:49:05.48 spid5s Creating procedure sp_verify_schedule_identifiers...
2015-03-24 19:49:05.49 spid5s
2015-03-24 19:49:05.49 spid5s Creating procedure sp_verify_jobproc_caller...
2015-03-24 19:49:05.50 spid5s
2015-03-24 19:49:05.50 spid5s Creating procedure sp_downloaded_row_limiter...
2015-03-24 19:49:05.51 spid5s
2015-03-24 19:49:05.51 spid5s Creating procedure sp_post_msx_operation...
2015-03-24 19:49:05.54 spid5s
2015-03-24 19:49:05.54 spid5s Creating procedure sp_verify_performance_condition...
2015-03-24 19:49:05.58 spid5s
2015-03-24 19:49:05.58 spid5s Creating procedure sp_verify_job_date...
2015-03-24 19:49:05.59 spid5s
2015-03-24 19:49:05.59 spid5s Creating procedure sp_verify_job_time...
2015-03-24 19:49:05.61 spid5s
2015-03-24 19:49:05.61 spid5s Creating procedure sp_verify_alert...
2015-03-24 19:49:05.62 spid5s
2015-03-24 19:49:05.62 spid5s Creating procedure sp_update_alert...
2015-03-24 19:49:05.63 spid5s
2015-03-24 19:49:05.63 spid5s Creating procedure sp_delete_job_references...
2015-03-24 19:49:05.65 spid5s
2015-03-24 19:49:05.65 spid5s Creating procedure sp_delete_all_msx_jobs...
2015-03-24 19:49:05.66 spid5s
2015-03-24 19:49:05.66 spid5s Creating procedure sp_generate_target_server_job_assignment_sql...
2015-03-24 19:49:05.66 spid5s
2015-03-24 19:49:05.66 spid5s Creating procedure sp_generate_server_description...
2015-03-24 19:49:05.67 spid5s
2015-03-24 19:49:05.67 spid5s Creating procedure sp_msx_set_account...
2015-03-24 19:49:05.68 spid5s
2015-03-24 19:49:05.68 spid5s Creating procedure sp_msx_get_account...
2015-03-24 19:49:05.69 spid5s
2015-03-24 19:49:05.69 spid5s Creating procedure sp_delete_operator...
2015-03-24 19:49:05.70 spid5s
2015-03-24 19:49:05.70 spid5s Creating procedure sp_msx_defect...
2015-03-24 19:49:05.71 spid5s
2015-03-24 19:49:05.71 spid5s Creating procedure sp_msx_enlist...
2015-03-24 19:49:05.72 spid5s
2015-03-24 19:49:05.72 spid5s Creating procedure sp_delete_targetserver...
2015-03-24 19:49:05.73 spid5s
2015-03-24 19:49:05.73 spid5s Creating procedure sp_enlist_tsx
2015-03-24 19:49:05.74 spid5s
2015-03-24 19:49:05.74 spid5s Creating procedure sp_get_sqlagent_properties...
2015-03-24 19:49:05.76 spid5s
2015-03-24 19:49:05.76 spid5s Create procedure sp_set_sqlagent_properties...
2015-03-24 19:49:05.76 spid5s
2015-03-24 19:49:05.76 spid5s Creating procedure sp_add_targetservergroup...
2015-03-24 19:49:05.77 spid5s
2015-03-24 19:49:05.77 spid5s Creating procedure sp_update_targetservergroup...
2015-03-24 19:49:05.78 spid5s
2015-03-24 19:49:05.78 spid5s Creating procedure sp_delete_targetservergroup...
2015-03-24 19:49:05.78 spid5s
2015-03-24 19:49:05.78 spid5s Creating procedure sp_help_targetservergroup...
2015-03-24 19:49:05.79 spid5s
2015-03-24 19:49:05.79 spid5s Creating procedure sp_add_targetsvgrp_member...
2015-03-24 19:49:05.80 spid5s
2015-03-24 19:49:05.80 spid5s Creating procedure sp_delete_targetsvrgrp_member...
2015-03-24 19:49:05.81 spid5s
2015-03-24 19:49:05.81 spid5s Creating procedure sp_verify_category...
2015-03-24 19:49:05.81 spid5s
2015-03-24 19:49:05.81 spid5s Creating procedure sp_add_category...
2015-03-24 19:49:05.82 spid5s
2015-03-24 19:49:05.82 spid5s Creating procedure sp_update_category...
2015-03-24 19:49:05.83 spid5s
2015-03-24 19:49:05.83 spid5s Creating procedure sp_delete_category...
2015-03-24 19:49:05.83 spid5s
2015-03-24 19:49:05.84 spid5s Creating procedure sp_help_category...
2015-03-24 19:49:05.84 spid5s
2015-03-24 19:49:05.84 spid5s Creating procedure sp_help_targetserver...
2015-03-24 19:49:05.85 spid5s
2015-03-24 19:49:05.85 spid5s Creating procedure sp_resync_targetserver...
2015-03-24 19:49:06.06 spid5s
2015-03-24 19:49:06.06 spid5s Creating procedure sp_purge_jobhistory...
2015-03-24 19:49:06.09 spid5s
2015-03-24 19:49:06.09 spid5s Creating procedure sp_help_jobhistory...
2015-03-24 19:49:06.10 spid5s
2015-03-24 19:49:06.10 spid5s Creating procedure sp_add_jobserver...
2015-03-24 19:49:06.11 spid5s
2015-03-24 19:49:06.11 spid5s Creating procedure sp_delete_jobserver...
2015-03-24 19:49:06.11 spid5s Error: 10011, Severity: 16, State: 1.
2015-03-24 19:49:06.11 spid5s Access denied.
2015-03-24 19:49:06.11 spid5s Error: 917, Severity: 15, State: 1.
2015-03-24 19:49:06.11 spid5s An upgrade script batch failed to execute for database 'master' due to compilation error. Check the previous error message for the line which caused compilation to fail.
2015-03-24 19:49:06.11 spid5s Error: 912, Severity: 21, State: 2.
2015-03-24 19:49:06.11 spid5s Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 917, state 1, severity 15. This is a serious error condition which might interfere with regular
operation and the database will be taken offline. If the error happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective
actions and re-start the database so that the script upgrade steps run to completion.
2015-03-24 19:49:06.11 spid5s Error: 3417, Severity: 21, State: 3.
2015-03-24 19:49:06.11 spid5s Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup, repair it, or rebuild it. For more information about how to rebuild the master database, see SQL Server Books
Online.
2015-03-24 19:49:06.12 spid5s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
2015-03-24 19:49:06.50 spid12s The SQL Server Network Interface library successfully deregistered the Service Principal Name (SPN) [ MSSQLSvc/AWISCDB.AIRWORKS.IN:SCSMDB ] for the SQL Server service.
Shailendra Dev -
Error while installing SAP NetWeaver Composition Environment 7.1 SR3
I got the following error while installing SAP NetWeaver Composition Environment 7.1 SR3 Evalution SDN Version - Java EE only
on my Windows XP, 1 GB RAM, 1.6 GHZ processor speed
An error occurred while processing service SAP NetWeaver CE Developer Edition > SAP NetWeaver CE Development System( Last error reported by the step :Java EE Engine configuration error. DIAGNOSIS: See output of logfile configtool.0.trc: ' INFO: Loading tool launcher... INFO: [OS: Windows XP] [VM vendor: SAP AG] [VM version: 5.1.000] [VM type: SAP Java Server VM] INFO: Main class to start: "com.sap.engine.configtool.batch.BatchInstall" INFO: Loading 51 JAR files: [D:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_jce.jar, D:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_jsse.jar, D:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_smime.jar, D:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_ssl.jar, D:\usr\sap\CE1\SYS\global\security\lib\tools\w3c_http.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jaas.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jdbc.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jload.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jperflib.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jsizecheck.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jstartup.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jstartupapi.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jstartupimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comsl.ut.infoprovider_lib.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comsl.ut.manager.offline.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comslctcimport.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcantlrruntime.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcblconfigimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbldeploycontrolleroffline_phase_asm.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbliqlibimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljdsrjdsr.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljkernel_dummyframe_dummy.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljkernel_dummykernel_dummy.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljkernel_utilimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljrfcimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbloffline_launcherimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcblopensqlimplStandalone.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcblslutilityimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcdddbcatalogimplCatalog.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcdddbdictionarydatabaseimplDictionaryDatabase.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcexceptionimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtci18ncpjarIMPL.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjebootstrapimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjecfscontainerstandalone_impl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeclientlibimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeconfigtool.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeextramile.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeofflineconfigurationimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeofflinelicense.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeoffline_deployimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjewebcontainerimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcloggingjavaimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsapxmltoolkitsapxmltoolkit.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsdtcvlimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsecdestinationslibimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsecinstallertoolsimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcseclikeylikey_assembly.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsecsecstorefsjavacore.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\servlet.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\tcje~cl_deploy.jar, D:\sapdb\programs\runtime\jar\sapdbc.jar] INFO: Start PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path '.). You may now
choose Retry to repeat the current step.
choose View Log to get more information about the error.
stop the task and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL.
Plz help me..itz urgent,
Cheers,
Aravind.Hi Eric,
The trace file says,
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.7.1006]/>
<!NAME[configtool.trc]/>
<!PATTERN[configtool.trc]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[UTF8]/>
<!FILESET[0, 5, 1000000]/>
<!PREVIOUSFILE[configtool.4.trc]/>
<!NEXTFILE[configtool.1.trc]/>
<!LOGHEADER[END]/>
#1.5 #02004C4F4F50000000000001005E8D7DFFFFFFFFFFFFFFFF#1202100775046#configtool##configtool#######Thread[main,5,main]##0#0#Fatal#1#/configtool#Java###Can't connect to DB.
[EXCEPTION]
#1#com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:409)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:153)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:48)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:176)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:263)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:57)
at com.sap.engine.configtool.batch.BatchInstall.executeTasks(BatchInstall.java:192)
at com.sap.engine.configtool.batch.BatchInstall.main(BatchInstall.java:238)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Caused by: com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://computer/CE1 [Restart required].
at com.sap.dbtech.jdbc.DriverSapDB.connect(DriverSapDB.java:216)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.createVendorConnection(DriverPooledConnectionFactory.java:50)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.getPooledConnection(DriverPooledConnectionFactory.java:37)
at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:677)
at com.sap.sql.connect.datasource.DBDataSourceImpl.newPooledConnection(DBDataSourceImpl.java:626)
at com.sap.sql.connect.datasource.DBDataSourceImpl.getPooledConnection(DBDataSourceImpl.java:165)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:211)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:353)
... 12 more
#1.5 #02004C4F4F5000000000000101904E0DFFFFFFFFFFFFFFFF#1202101914781#configtool##configtool#######Thread[main,5,main]##0#0#Fatal#1#/configtool#Java###Can't connect to DB.
[EXCEPTION]
#1#com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:409)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:153)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:48)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:176)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:263)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:57)
at com.sap.engine.configtool.batch.BatchInstall.executeTasks(BatchInstall.java:192)
at com.sap.engine.configtool.batch.BatchInstall.main(BatchInstall.java:238)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Caused by: com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://computer/CE1 [Restart required].
at com.sap.dbtech.jdbc.DriverSapDB.connect(DriverSapDB.java:216)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.createVendorConnection(DriverPooledConnectionFactory.java:50)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.getPooledConnection(DriverPooledConnectionFactory.java:37)
at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:677)
at com.sap.sql.connect.datasource.DBDataSourceImpl.newPooledConnection(DBDataSourceImpl.java:626)
at com.sap.sql.connect.datasource.DBDataSourceImpl.getPooledConnection(DBDataSourceImpl.java:165)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:211)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:353)
... 12 more
#1.5 #02004C4F4F50000000000001014B84C7FFFFFFFFFFFFFFFF#1202102025296#configtool##configtool#######Thread[main,5,main]##0#0#Fatal#1#/configtool#Java###Can't connect to DB.
[EXCEPTION]
#1#com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:409)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:153)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:48)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:176)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:263)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:57)
at com.sap.engine.configtool.batch.BatchInstall.executeTasks(BatchInstall.java:192)
at com.sap.engine.configtool.batch.BatchInstall.main(BatchInstall.java:238)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Caused by: com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://computer/CE1 [Restart required].
at com.sap.dbtech.jdbc.DriverSapDB.connect(DriverSapDB.java:216)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.createVendorConnection(DriverPooledConnectionFactory.java:50)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.getPooledConnection(DriverPooledConnectionFactory.java:37)
at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:677)
at com.sap.sql.connect.datasource.DBDataSourceImpl.newPooledConnection(DBDataSourceImpl.java:626)
at com.sap.sql.connect.datasource.DBDataSourceImpl.getPooledConnection(DBDataSourceImpl.java:165)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:211)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:353)
... 12 more
#1.5 #02004C4F4F5000000000000100E0C7C3FFFFFFFFFFFFFFFF#1202099599843#configtool##configtool#######Thread[main,5,main]##0#0#Fatal#1#/configtool#Java###Can't connect to DB.
[EXCEPTION]
#1#com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:409)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:153)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:48)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:176)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:263)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:57)
at com.sap.engine.configtool.batch.BatchInstall.executeTasks(BatchInstall.java:192)
at com.sap.engine.configtool.batch.BatchInstall.main(BatchInstall.java:238)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Caused by: com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://computer/CE1 [Restart required].
at com.sap.dbtech.jdbc.DriverSapDB.connect(DriverSapDB.java:216)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.createVendorConnection(DriverPooledConnectionFactory.java:50)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.getPooledConnection(DriverPooledConnectionFactory.java:37)
at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:677)
at com.sap.sql.connect.datasource.DBDataSourceImpl.newPooledConnection(DBDataSourceImpl.java:626)
at com.sap.sql.connect.datasource.DBDataSourceImpl.getPooledConnection(DBDataSourceImpl.java:165)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:211)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:353)
... 12 more
#1.5 #02004C4F4F5000000000000100C22A3BFFFFFFFFFFFFFFFF#1202101476187#configtool##configtool#######Thread[main,5,main]##0#0#Fatal#1#/configtool#Java###Can't connect to DB.
[EXCEPTION]
#1#com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:409)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:153)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:48)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:176)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:263)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:57)
at com.sap.engine.configtool.batch.BatchInstall.executeTasks(BatchInstall.java:192)
at com.sap.engine.configtool.batch.BatchInstall.main(BatchInstall.java:238)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Caused by: com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://computer/CE1 [Restart required].
at com.sap.dbtech.jdbc.DriverSapDB.connect(DriverSapDB.java:216)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.createVendorConnection(DriverPooledConnectionFactory.java:50)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.getPooledConnection(DriverPooledConnectionFactory.java:37)
at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:677)
at com.sap.sql.connect.datasource.DBDataSourceImpl.newPooledConnection(DBDataSourceImpl.java:626)
at com.sap.sql.connect.datasource.DBDataSourceImpl.getPooledConnection(DBDataSourceImpl.java:165)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:211)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:353)
... 12 more
#1.5 #02004C4F4F50000000000001014B84C7FFFFFFFFFFFFFFFF#1202107230359#configtool##configtool#######Thread[main,5,main]##0#0#Fatal#1#/configtool#Java###Can't connect to DB.
[EXCEPTION]
#1#com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:409)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:153)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:48)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:176)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:263)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:57)
at com.sap.engine.configtool.batch.BatchInstall.executeTasks(BatchInstall.java:192)
at com.sap.engine.configtool.batch.BatchInstall.main(BatchInstall.java:238)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Caused by: com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://computer/CE1 [Restart required].
at com.sap.dbtech.jdbc.DriverSapDB.connect(DriverSapDB.java:216)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.createVendorConnection(DriverPooledConnectionFactory.java:50)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.getPooledConnection(DriverPooledConnectionFactory.java:37)
at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:677)
at com.sap.sql.connect.datasource.DBDataSourceImpl.newPooledConnection(DBDataSourceImpl.java:626)
at com.sap.sql.connect.datasource.DBDataSourceImpl.getPooledConnection(DBDataSourceImpl.java:165)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:211)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:353)
... 12 more
Can you please advice me how to get rid of this problem?
Is there any prob with MAC address resolution or loop back adapter? if yes, how to get rid of that?
Cheers,
Aravind
Maybe you are looking for
-
ITunes doesn't open in window's 8, what can I do?
I had itunes running well in Windows 8, but about 1 week ago, it stoped working; it just didn't open, so I tried to unninstall, the compatibility solution; and nothing work... Someone can help me? Thanks in advance! PS I have an Alienware M14x R2 win
-
Crystal Viewer not working with Parameterized file
When I run a classic ASP file without parameter collections, I can see Crystal Viewer with data from the db. This works fine. If, however, I run an ASP file with parameter collections, I get static text only. The viewer is not displaying records from
-
I am using RoboHelp HTML 9 and for some reason cannot get a new linked or imported Word document to paginate. I've also tried a new Word document. I have tried a new project and tried updating a project. I used my style sheet that has always worked
-
Hello Please can somoene tell me where can i find the standard program written for a datasource. Like the data contains standard fields so there must be a code written somewhere to populate those fields. Please do not tell me how to append a datasour
-
Hi, Pretty new to adobe, but have a quetsion regarding exporting finished projects. My project has a mixture of video clips, music and fotos. In the background, I have a video running in the backhround and there are pictures (jpegs) transitioning in