Error while installing MS Project Server 2013(trial) on Sharepoint 2013(CAL)
My problem is that I get the following error:
trial editions and licensed editions of SharePoint, Project Server, and Office Web Apps products may not be installed on the same server
when I try to install MS Project Server 2013(180 days-evaluation) over a Sharepoint 2013(MAPS license).
What does exactly this error say?
Do I need to have Sharepoint and MS Project Server with same type of license?
If so, I suppose I'll have to remove Sharepoint(MAPS) and install a 180 days-evaluation Sharepoint. Will this re-installation be acceptable or I'll get some license type incompatibility issues?
Hello. You are correct, you will need to have the same license types either both trials or both licensed. Uninstalling/ reinstalling with trials should work fine or build another trial farm. Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads
Similar Messages
-
Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
bash-3.00$ ./irca.sh
Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
(c) Copyright 2006 Oracle Corporation. All rights reserved.
ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
Please verify that the ORACLE_HOME is set correctly.
bash-3.00$Hi Craig,
Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
Section :- Oracle Application Server 10g Release 3 (10.1.3)
Regards,
Praaksh. -
Invalid Key code Error while installing crystal report server 11
While installing crystal report server 11,i am facing an erro which says Invalid Key code Error.I had raised this issue to SAP customer support and attaching the conversation that we had.PLEASE HELP me to resolve the issue.
MAILS--Dear Mohit,
Thanks for the patience.
We have received the below update from the Licensing Team.
You received your permanent key in respect of these licenses - the key is for Crystal Reports Server XI.
You did not purchase these licenses for Crystal Reports Server, but purchased it for Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer. The software included was version XIR2, but you elected to use version XI instead and received key .
You would need to enroll the licenses in maintenance if you want to upgrade them.
In case of any queries please create a ticket via the Service Market Place.
Regards,
Jessy
Customer Interaction Center
SAP Active Global Support
Hello Jessy,
The customer received their permanent key in respect of these licenses - the key is for Crystal Reports Server XI.
They did not purchase these licenses for Crystal Reports Server, they purchased Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer. The software included was version XIR2, but they elected to use version XI instead and they received key .
They cannot decide to upgrade now - they must enrol these licenses in maintenance if they want to upgrade them.
Kind regards,
Rosemary
From: BOSAPASIA
Sent: 29 September 2009 05:49
To: Savage, Rosemary
Subject: FW: Crystal Reports Server Installation Issue
Importance: High
HI Rose ,
Need your assistance on the below issue.
Customer purchased Crystal Report Server XI R2 in 2005. When he is trying to install it now, he is getting an Invalid Key code Error.
He has provided us the Scanned copies of the Key code and the registration number.Can you please help and check if he can be provided with a Keycode.
Regards,
Jessy
CIC Team Lead
Customer Interaction Center
Global Support Centre India
SAP Labs India Pvt Ltd
Hi,
Providing you with the required details to proceed further
Registration Number-
Registration Email Address-taxmantra.support
And also please find attached the scanned copy of the Registration key we got for the Crystal report server.
Dear Mohitk,
Thank you for your information.
I checked with the concerned colleague and received the below update:
Please check from where you got this key code. If from a paper, please scan it to us. Please let them track to the original paper or email.
If you have registered the key code, please provide us the registration number or registration email address so that we will try to check for you.
If you did not register before, as the promotion is over so the key code could not be replaced.
I request you to kindly check the same at your end and revert with the details.
Moreover, there are two ways for Crystal Report customer to get support.
One is customer with bundled product such like BOE and under maintenance. These customers will have an S-user ID and password to log a case in service market place via http://service.sap.com/message
A learning map was provided, listed on left column.
The other is customer with only Crystal report product, the support is via SDN.
http://service.sap.com =>Crystal Reports and Xcelsius Support=>Crystal Reports and Xcelsius Forums
Customers can first check whether other customer has got the same issue and find the reply from our engineers.
You may also post your own thread for support.
Anything else I could help, please do not hesitate to contact again.
Hi,
I am providing you with the details required to resolve the issue related to Crystal report installation,for reference of the issue please refer the mail below.
Please find attached the Scanned Document containing the details as per the details required by you.
Hope to see a quick resolution for the issue.
Dear Mohit,
Thank you for your e-mail.
As discussed, I understand that youu2019ve procured Crystal Reports Server 11 in 2006. However youu2019re facing issues with key codes while reinstalling the same. We request you to kindly provide us with below details for further assistance.
Your customer number:
Your customer name and address:
Purchase order number:
Any other products purchased along with Crystal Reports Server 11
Any S-User Id:
Any old case ID:
Please feel free to contact us if any further queries.
Hi,
I am raising this concern on behalf on Taxmantra project (Tata Consultancy Services noida).
We have bought licensed Crystal Reports Server 11 near by 2006.We are trying to install the crystal server but while installing ,we have encountered with an error message that:-
"The product key code you have entered is incorrect"
We are facing the same issue in 2006,I am attaching with this email the conversations that was held in 2006 to get the correct key code.
Please help us to resolve the issue as early as possible.
My contact number:
If you need any further information do let me knowAjit,
By design, the product is not able to be installed under the superuser account.
1. Create a new user and specify a home directory for the user without a quota set.
2. Copy or move the installation files to a directory that the new user can read. I suggest you move the installation files directly into the new user's home directory.
3. Logon as the new user (or su - newuser)
4. run the installation shell script using that new user's account.
NOTE: Ensure the system meets the requirements from the supported platforms documents.
.Tony -
Errors while installing Oracle BPEL Server version 10.1.3.1.0
I am new to Oracle middleware. Ofcourse I am not new to middleware altogether.
I am getting wide varieties of errors while installing the software. Everytime a new error is popping up.I have installed/uninstalled the software for almost 10 times and I have started loosing faith on the software and the support There is absolutely no documentation what so ever.
I find this forum may be able to help.
Here are the details:
OS: Windows XP professional
Insalled Loop back adapter for XP as suggested
Installing soa_windows_x86_bpel_101310
Getting several errors and the first error I could find is:
08/01/22 23:33:14 log4j:WARN No appenders could be found for logger (root).
08/01/22 23:33:14 log4j:WARN Please initialize the log4j system properly.
<2008-01-22 23:33:17,265> <INFO> <collaxa> <ConnectionFactoryImpl::init> Initial
ized connection factory jdbc/BPELServerDataSourceWorkflow
<2008-01-22 23:33:17,281> <INFO> <collaxa> <ConnectionFactoryImpl::init> Initial
ized connection factory jdbc/BPELServerDataSource
08/01/22 23:33:42 java.sql.SQLException: [POL-3251] there is no group file with
the specified name
08/01/22 23:33:42 at oracle.lite.poljdbc.LiteThinJDBCConnection.thinSQLErr
or(Unknown Source)
Please help
Thanks in advanceThanks Ben.
I have updated the hosts file with the the loop back address.
You mentioned "You need to be able to resolve your machine's FQDN to the IP you allocated the loopback adapter". Is there anything specifc you would like me to try.
BTW I am using oracle lite and I have chosen the option " for developers" while installing the BPEL PM software
The settings you have indicated if I am correct are for fullOracle DB than OracleLite. If it is, cna you post similar settings for Oracle Lite.
Following is the data-sources.xml located at drive:\orabpel\bpel\system\appserver\oc4j\j2ee\home\config
<?xml version="1.0" standalone='yes'?>
<!DOCTYPE data-sources PUBLIC "Orion data-sources" "http://xmlns.oracle.com/ias/dtds/data-sources-9_04.dtd">
<data-sources>
<!-- Connection pool for oracle database -->
<!--
<connection-pool name="BPELPM_CONNECTION_POOL">
<connection-factory factory-class="oracle.jdbc.OracleDriver"
url="jdbc:oracle:thin:[username]/[password]@[hostname]:[port]:[sid]" />
</connection-pool>
-->
<!-- Connection pool for oracle lite -->
<connection-pool name="BPELPM_CONNECTION_POOL">
<connection-factory factory-class="oracle.lite.poljdbc.POLJDBCDriver"
user="system"
password="manager"
url="jdbc:[email protected]:1531:orabpel" />
</connection-pool>
<managed-data-source name="BPELServerDataSource"
connection-pool-name="BPELPM_CONNECTION_POOL"
jndi-name="jdbc/BPELServerDataSource" tx-level="global"/>
<managed-data-source name="BPELServerDataSourceWorkflow"
connection-pool-name="BPELPM_CONNECTION_POOL"
jndi-name="jdbc/BPELServerDataSourceWorkflow" tx-level="local"/>
<managed-data-source name="BPELSamplesDataSource"
connection-pool-name="BPELPM_CONNECTION_POOL"
jndi-name="jdbc/BPELSamplesDataSource" />
</data-sources>
Any other pointers that you think can help. Please let me know
Message was edited by:
Chandra U -
Issue while installing Ms Project Server 2013 on MS Server 2012 R2 with Sharepoint Server 2013
Hello MS Support Team,
I installed SQL server 2012 & Sharepoint server 2013 and after that the MS project Server 2013 is not installing on the same server -- pls hv a look the enclosed screenshot. sent at [email protected] and guide me to resolve it on priority.
A windows poped up - Installation Error - This Project requires MS Sharepont Enterprise edition... (Which is not available on the MSDN Server)..only standard edition available.
Please reply asap @ [email protected] - Call @ 0120471384
Kind Regards,
Vinay Bhardwaj
Network System Administrator - GREC (IN)
Rockwell Automation | A-66, Sector 64 | Noida | India
LISTEN. THINK. SOLVE
IP : 71384 | E : [email protected] | W : www.rockwellautomation.comHi Siriosus,
Indeed you do need Sharepoint Server 2013
Enterprise for Project Server 2013.
See article below where it is mentionned:
Project Server 2013 requires the Enterprise edition of SharePoint Server 2013. Prior versions of SharePoint Server and SharePoint Foundation 2013 are not supported.
http://technet.microsoft.com/en-us/library/ee662114(v=office.15).aspx
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS | -
Error while installing Netweaver 04s sneak preview trial version for java
Hi Experts,
I am trying to install SAP netweaver 04s sneak preview trial version for Java in my own desktop. While installing, it is showing the following error
ERROR
CJS-30129 Creating node $(DIR_TRANS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:Unable to create node
abcd\sapmnt\ with type DIRECTORY: can't create parent node..
ERROR
CJS-30129 Creating node $(DIR_TRANS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:Unable to create node
abcd\sapmnt\ with type DIRECTORY: can't create parent node..
ERROR
FCO-00011 The step createSystemDirectories with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|6|0|createSystemDirectories was executed with status ERROR .
I gave the database host name as the name of the computer. While installing the 3rd step, the above error is displaying. can anyone guide me how to proceed further.
regards,
vvhow are u trying to install it.....i mean...are the source and the installtion drive on the same PC?
-
Error while installing iplanet directory server 5.0
Hi I am trying to install iPlanet directory server 5.0 on my local machine.My computer name doesnot contain any domain name.it is simply like "ERT3210".
While installing Directory server it is asking for the computer name and if i give the computer name without domain it is not accepting.And i am unable to rename my computer name suffixing domain name as it is not contained in any domain..Now How can i give the computer name to install directory server?.Its very urgent for me.It will be great help if any one give reply.Start/Stop Directory Server and Start/Stop Admin Server are usually present in My Computer/Manage/Services, just start or stop the service.
Assuming the install root directory is %LDAP_ROOT%
You could always create program icons for
1) start/stop dirrectory server
%LDAP_ROOT%\slapd-%COMPUTERNAME%\start-slapd.exe
%LDAP_ROOT%\slapd-%COMPUTERNAME%\stop-slapd.exe
2) start/stop admin server
%LDAP_ROOT%\start-admin.exe
%LDAP_ROOT%\stop-admin.exe
3) SUN ONE Console (iPlanet Console)
%LDAP_ROOT%\startconsole.exe
Gary -
Help!!! Error while installing Oracle9i Application Server on Solaris 5.8
I have installed oracle 9i on sun solaris 5.8. it has the original seed database provided by oracle.
I am doing runinstall from disk1 directory of 9iAS and trying to install Oracle 9iApplication Server 9.0.2.0.0
after this I get a screen with Installation types where option A is selected by default (which installs J2EE, Webcache, HTTP server)when I press next it does setting up install types and displays the following message
" Your local host name database file(typically /etc/hosts) is not configured properly. This file should have and entry of the form:
<IP_ADDRESS><FULLY_QUALIFIED_HOSTNAME><ALIASES>
on solaris systems, the following files should also contain the fully qualified hostname, including the domain name:
/etc/nodename, /etc/net/ticlts/hosts, /etc/net/ticots/hosts,/etc/net/ticotsord/hosts and any files in /etc whose name begin with 'hostname'
Failure to properly configure this file may result in product runtime issues regarding proper hostname resolution."
the /etc/host file has two entries one for loopback and other hostname which are in proper format except there is no alias for loopback.
Am I doing something wrong or was the oracle installation not proper.
I logged in as 'oracle' and changed all files. Next time when i tried to login using oracle acct and tried to open a terminal the screen went black.
How do I install Oracle9iAS.I am having a similar problem with an Oracle 8i install. It seems that the 9i install
heads off this same problem before running into it. There must be a file it sees
as not being properly updated with the host information. I checked all of the
host* files that I could find and they seem to be correct.
Please let me know when someone answers the question at both addresses
below:
[email protected] and [email protected] -
Error while installing NetWeaver CE 7.2 trial at step 21
Dear SDN,
I am trying to install the NetWeaver CE 7.2 trial version. A the step 21 (u201CInstall Instance basics of SCS01u201D) I get the following error:
Message:
u201CAn error occurred while processing option SAP NetWeaver Developer Edition > Server( Last error reported by the step :'C:/usr/sap/CE1/SYS/exe/uc/NTI386/sapstartsrv.exe' returned with '-1'.).u201C
Trace 1:
An error occurred at step:
ERROR 2010-08-13 19:10:32.227 [sixxcstepexecute.cpp:988]
FCO-00011 The step createService with step key NW_Instance -> createService was executed with status ERROR
Logfile location: C:\Programme\sapinst_instdir\NW72_DEV_ADA\SERVER\sapinst.log
999 ERROR 2010-08-13 19:10:32.227 [sixxcstepexecute.cpp:988]
FCO-00011 The step createService with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|12|0|NW_Instance|ind|ind|ind|ind|1|0|createService was executed with status ERROR ( Last error reported by the step :'C:/usr/sap/CE1/SYS/exe/uc/NTI386/sapstartsrv.exe' returned with '-1'.).
Trace sapinst and sapinst-dev:
WARNING[E] 2010-08-13 19:10:03.556 [ianxbservi.hpp:244]
CServiceHandle::Open(ClusSvc)
FSL-06002 Error 1060 (Der angegebene Dienst ist kein installierter Dienst. ) in execution of a 'OpenService' function, line (267), with parameter (ClusSvc).
ERROR 2010-08-13 19:10:32.157
CJSlibModule::writeError_impl()
MOS-01011 'C:/usr/sap/CE1/SYS/exe/uc/NTI386/sapstartsrv.exe' returned with '-1'.
My system configuration:
OS: Windows XP Professional SP 2 (32 Bit)
RAM: 1.5GB
User: Administrator (local user Administrator)
JAVA Engine: JDK/JRE 1.6 with Update 21
Can someone please let me know how should I resolve this?
Regards,
LaszloHi Laszlo,
The Java troubleshooting guide http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/dc49a7fb-0701-0010-88bf-f45221a97d15&overridelayout=true has some suggested solutions or trouble shooting steps for the MOS-01011 error - starting on page 19.
I also noticed that you only have 1.5GB of RAM but minimum requirement states 2GB, could be related, could not. Have never tried to install CE with less than 2GB of RAM http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/a0a6bd7b-3dfc-2c10-eb95-aae0f777d4ab ;-).
HTH.
O. -
Error while instaling the MEP server for Single tier, using Oracle 10g DB
createDatabaseTables:
getAppServer:
============================================================
Sun Java System Mobile Enterprise Platform
============================================================
checkAppServer:
defaultDomainExists:
checkDefaultDomain:
Found "domain1", do you want to delete it? [y/n]
y
shouldDeleteDefaultDomain:
deleteDefaultDomain:
The domain (domain1) isn't running.
Domain domain1 deleted.
setup:
getDomainProperties:
Enter the name for the new Application Server domain (default: mep)
mep
Enter the Admin Port for the new domain [mep] (default: 4848)
Enter the HTTP Port for the new domain [mep] (default: 8080)
Enter the HTTPS Port for the new domain [mep] (default: 8181)
Enter the admin password for the new domain (default: adminpass)
remoba123
installGateway:
init:
getDomainProperties:
createDomain:
Using port 4848 for Admin.
Using port 8080 for HTTP Instance.
Using default port 7676 for JMS.
Using default port 3700 for IIOP.
Using default port 8181 for HTTP_SSL.
Using default port 3820 for IIOP_SSL.
Using default port 3920 for IIOP_MUTUALAUTH.
Using default port 8686 for JMX_ADMIN.
Domain being created with profile:developer, as specified by variable AS_ADMIN_P
ROFILE in configuration file.
Security Store uses: JKS
Domain mep created.
startDomain:
Attempting to start domain...
Waiting for domain to finish initializing
Waiting for status to be: mep running
init:
configureDomain:
Copying files to installation directory ...
Copying 53 files to F:\Sun\AppServer\domains\mep\ds
Copying 101 files to F:\Sun\AppServer\domains\mep\lib
Copying 1 file to F:\Sun\AppServer\domains\mep\lib
Copying 1 file to F:\Sun\AppServer\domains\mep\lib
Copying 1 file to F:\Sun\AppServer\domains\mep\lib
Copying 1 file to F:\Sun\AppServer\domains\mep\lib\classes\META-INF
init:
copyOracleJar:
Copying 1 file to F:\Sun\AppServer\domains\mep\lib\ext
Copying 1 file to F:\Sun\AppServer\domains\mep\lib\ext
server.java-config.classpath-suffix = F:\Sun\AppServer/domains/mep/ds/skin/user/
messages/i18n;F:\Sun\AppServer/domains/mep/ds/skin/admin/messages/i18n
Command create-jvm-options executed successfully.
Command create-jvm-options executed successfully.
Command create-jvm-options executed successfully.
Command create-jvm-options executed successfully.
Command create-jvm-options executed successfully.
Command create-jvm-options executed successfully.
Command create-jms-resource executed successfully.
Command create-jmsdest executed successfully.
Command create-jms-resource executed successfully.
configure:
configureMySQL:
configureOracle:
Command create-jdbc-connection-pool executed successfully.
Command create-jdbc-connection-pool executed successfully.
server.resources.jdbc-connection-pool.musicdb_jdbc_pool_oracle.match-connections
= true
configureRealm:
Command create-jdbc-resource executed successfully.
Command create-jdbc-resource executed successfully.
Command create-auth-realm executed successfully.
deployEAR:
stopDomain:
Domain mep stopped.
startDomain:
Attempting to start domain...
Waiting for domain to finish initializing
Waiting for status to be: mep running
Still waiting for status to be: mep running
Command deploy executed successfully with following warning messages: WARNING:
JDO76611: Cannot connect to database via JNDI name 'jdbc/gw': java.sql.SQLExcept
ion: Connection could not be allocated because: ORA-01017: invalid username/pass
word; logon denied.
installJCAconnectors:
stopDomain:
Domain mep stopped.
Aug 22, 2008 8:22:55 PM com.sun.jbi.installer.JBICoreInstaller main
INFO: OpenESB JBI Core Components successfully installed in F:\Sun\AppServer\jbiThe error suggests that the oracle gwdb database was incorrectly created with the wrong username and password for the database. The installation expects the gwdb database to be created with the username of "gwdbuser" and password of "gwdbpass". I would check the login credentials for this database. Also the installation expects the musicdb database to be created with the username of "musicdbuser" and password "musicdbpass". You may want to check this as well.
JDO76611: Cannot connect to database via JNDI name 'jdbc/gw': java.sql.SQLExcept
ion: Connection could not be allocated because: ORA-01017: invalid username/pass
word; logon denied.
Alan Frechette
Sun MEP SQA Engineer -
Error while installing NetWeaver ABAP 7.0 Trial (2008 version) in Windows 7
Hi,
My Sys config is :
Windows 7
1.5 GB RAM
1.6 GHz Processor
250 GB HDD - Providing 50 GB partition for the SAP NetWeaver ABAP 7.0 Trial installation.
After installing the J2E 1.4 & configuring the environment variables, MS loopback adapter......I started the SAP installation, it said the installation can't run in GUI mode....start in "-console" or "-silent".
Then I started the installation in "-CONSOLE" mode......it asked for paths .... then installation started.....after 10 minutes, it haulted with following error :
(May 16, 2015 12:19:55 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file D:\sapdb\log.txt for details.
(May 16, 2015 12:19:55 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/ajax/AppData/Local/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/ajax/AppData/Local/Temp/MaxDBSAPNWPREV.log")
at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
What should I do ?
Regards
AjayHi Jan, here is the log of the file in TEMP folder. I have purposely made 'Starred Lines' in order to separate the log line :
Sat May 16 12:08:34 GMT 2015 MaxDB: Start SoftwareCheck
Sat May 16 12:08:34 GMT 2015 MaxDB: IndepProgPath:
Sat May 16 12:08:34 GMT 2015 MaxDB: IndepDataPath:
Sat May 16 12:08:34 GMT 2015 MaxDB: Software doesn't exist, Variable MAXDB_SOFTW_EXISTS set to NO
Sat May 16 12:08:34 GMT 2015 MaxDB: end of Check Section!
Sat May 16 12:08:34 GMT 2015 MaxDB: Database SID: DB <SID> is not filled
Sat May 16 12:08:34 GMT 2015 MaxDB: Password confirmation: 3-9 characters necessary
Sat May 16 12:10:12 GMT 2015 MaxDB: Start SoftwareCheck
Sat May 16 12:10:12 GMT 2015 MaxDB: IndepProgPath:
Sat May 16 12:10:12 GMT 2015 MaxDB: IndepDataPath:
Sat May 16 12:10:12 GMT 2015 MaxDB: Software doesn't exist, Variable MAXDB_SOFTW_EXISTS set to NO
Sat May 16 12:10:12 GMT 2015 MaxDB: end of Check Section!
Sat May 16 12:10:12 GMT 2015 MaxDB: Database SID: DB <SID> is not filled
Sat May 16 12:10:12 GMT 2015 MaxDB: Password confirmation: 3-9 characters necessary
Sat May 16 12:12:22 GMT 2015 MaxDB: Start SoftwareCheck
Sat May 16 12:12:22 GMT 2015 MaxDB: IndepProgPath:
Sat May 16 12:12:22 GMT 2015 MaxDB: IndepDataPath:
Sat May 16 12:12:22 GMT 2015 MaxDB: Software doesn't exist, Variable MAXDB_SOFTW_EXISTS set to NO
Sat May 16 12:12:22 GMT 2015 MaxDB: end of Check Section!
Sat May 16 12:13:04 GMT 2015 MaxDB: Database SID: DB <SID> is not filled
Sat May 16 12:13:04 GMT 2015 MaxDB: Password confirmation: 3-9 characters necessary
Sat May 16 12:13:20 GMT 2015 MaxDB: Start of Extracting Software and Backup.
Sat May 16 12:19:42 GMT 2015 MaxDB: End of Extracting Software and Backup.
Sat May 16 12:19:42 GMT 2015 MaxDB: Start of CallSdbinst
Sat May 16 12:19:42 GMT 2015 MaxDB: IndepProgPath = D:/sapdb/programs
Sat May 16 12:19:42 GMT 2015 MaxDB: inst_type = :restore:
Sat May 16 12:19:42 GMT 2015 MaxDB: Calling sdbinst with template option sapmds
Sat May 16 12:19:42 GMT 2015 MaxDB SID:
Sat May 16 12:19:42 GMT 2015 MaxDB drive: D:\
Sat May 16 12:19:42 GMT 2015 MaxDB softwarepath: D:/sapdb
Sat May 16 12:19:42 GMT 2015 MaxDB Software location: D:/sapdb/_tempLocation
Sat May 16 12:19:42 GMT 2015 MaxDB backup_loc: D:/sapdb/_tempLocation/load/load_datasave
Sat May 16 12:19:42 GMT 2015 MaxDB program: D:/sapdb/_tempLocation/sdbinst.exe
Sat May 16 12:19:42 GMT 2015 MaxDB paramfile: D:/sapdb/_tempLocation/sapmds.txt
Sat May 16 12:19:42 GMT 2015MaxDB found sdbinst
Sat May 16 12:19:42 GMT 2015 MaxDB: Calling: D:/sapdb/_tempLocation/sdbinst.exe -t sapmds -f "D:/sapdb/_tempLocation/sapmds.txt" -p DBNAME= -p SOFTWAREPATH="D:/sapdb" -p INSTANCEBACKUP="D:/sapdb/_tempLocation/load/load_datasave"
Sat May 16 12:19:51 GMT 2015 MaxDB sdbinst:
Sat May 16 12:19:51 GMT 2015 MaxDB sdbinst:
Sat May 16 12:19:51 GMT 2015 MaxDB sdbinst: Installation of MaxDB Software
Sat May 16 12:19:51 GMT 2015 MaxDB sdbinst: *******************************
Sat May 16 12:19:51 GMT 2015 MaxDB sdbinst:
Sat May 16 12:19:51 GMT 2015 MaxDB sdbinst:
Sat May 16 12:19:51 GMT 2015 MaxDB sdbinst: starting installation Sa, May 16, 2015 at 17:49:51
Sat May 16 12:19:52 GMT 2015 MaxDB sdbinst: operating system: Windows I386 NT 5.1 Service Pack 2
Sat May 16 12:19:52 GMT 2015 MaxDB sdbinst: callers working directory: E:/SAP/SAPNW7.0ABAPTrialSP12/image
Sat May 16 12:19:52 GMT 2015 MaxDB sdbinst: installer directory: D:/sapdb/_tempLocation
Sat May 16 12:19:52 GMT 2015 MaxDB sdbinst: archive directory: D:/sapdb/_tempLocation
Sat May 16 12:19:52 GMT 2015 MaxDB sdbinst:
Sat May 16 12:19:52 GMT 2015 MaxDB sdbinst:
Sat May 16 12:19:55 GMT 2015 MaxDB sdbinst: cannot find programfilesdir in windows registry
Sat May 16 12:19:55 GMT 2015 MaxDB sdbinst: installation exited abnormally at Sa, May 16, 2015 at 17:49:55
Sat May 16 12:19:55 GMT 2015 MaxDB: Error during call to sdbinst, rc= 1
Sat May 16 12:19:55 GMT 2015 MaxDB: Done with call_sdbinst
Sat May 16 12:19:55 GMT 2015 MaxDB: rc of sdbinst = 1
Sat May 16 12:19:55 GMT 2015 MaxDB: Start of CallSdbuninst
Sat May 16 12:19:55 GMT 2015 MaxDB: No IndepProgPath. Nothing to do. -
Error while installing NW for abap free trial on SLES
The error I get after entering new passwords for n4sadm etc:
unpacking /root/Desktop/server/TAR/x86_64/SAPDB_I.tar.bz2
tar: /root/Desktop/server/TAR/x86_64/SAPDB_I.tar.bz2: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
unpacking /root/Desktop/server/TAR/x86_64/SAPDB_II.tar.bz2
tar: /root/Desktop/server/TAR/x86_64/SAPDB_II.tar.bz2: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
unpacking /root/Desktop/server/TAR/x86_64/SAPDB_III.tar.bz2
tar: /root/Desktop/server/TAR/x86_64/SAPDB_III.tar.bz2: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
unpacking /root/Desktop/server/TAR/x86_64/SAPN4S.tar.bz2
tar: /root/Desktop/server/TAR/x86_64/SAPN4S.tar.bz2: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
cp: cannot stat `/home/n4sadm/sysctl.txt': No such file or directory
Update the necessary information in sysctl.conf:
error: unable to open preload file "/etc/sysctl.conf"
ln: creating symbolic link `/etc/init.d/rc3.d/S99n4shost' to `/home/n4sadm/S99_n4shost.sh': File exists
./INSTALL.SH: line 420: /home/n4sadm/S99_n4shost.sh: No such file or directory
find: /usr/sap/N4S: No such file or directory
find: /usr/sap/trans: No such file or directory
find: /sapmnt: No such file or directory
find: /sapdb: No such file or directory
find: /sapdb: No such file or directory
find: /sapdb: No such file or directory
./INSTALL.SH: line 461: cd: /usr/sap/N4S/SYS/: No such file or directory
Ok
What is missing?
thx in advance.
JayHi,
can you please explain the problem more clearly.
Linux is the system OS . you are using Max Db database.
i think that you are trying to untar Some database CD file .please explain the situation.
What i can undestand from this :
find: /usr/sap/N4S: No such file or directory
find: /usr/sap/trans: No such file or directory
find: /sapmnt: No such file or directory
please check the file system are mounted or not.
thanks Rishi Abrol -
Oracle - Microsoft Odbc Error while installing UPK on Server 2008 64 bit..
upk VERSION: 3.5.1
os: windows 2008 server 64 bit
oracle: 11g.1 for 64 bit
i have created a user with sysdba and other privileges and i am able to login into database as well.
but when i try to run the UPK ( server) installer and select the ORacle database i am getting following error after entering user name and password.
Error:
====
An error occur while trying to connect to the server"
MSDAORA: there was an error logging into oracle
Error: oracle client and networking components were not found.
{Microsoft ODBC for Oracle} there was an error logging into oracle .
error: Microsoft ODBC Driver manager Driver SQLALLOCHandle on SQL_Handle_Env_failed(0).
Any help would be highly appreciate.
thanks.Hi,
Have you found a solution for this problem yet?
I am facing the same issue.
I would be very gratefull for a solution to this problem.
Edited by: [email protected] on 11.06.2010 03:43 -
Error while installing standalone weblogic server.
Hi,
I tried to create standalone weblogic server instance from one of the ADE views. [http://www-apps.us.oracle.com:1100/~lymiller/Drop8StandaloneWLS.html#sample_install|http://www-apps.us.oracle.com:1100/~lymiller/Drop8StandaloneWLS.html#sample_install] .
After running the command ./wlsconfig.sh in $ADE_VIEW_ROOT/fatools/tools/wlsconfig directory, I got the following error.
AdminServer only cleanup ...
ESS runtime not required. Delete ESS runtime bits
Error: delete() failed. Do dumpStack() to see details.
Problem invoking WLST - Traceback (innermost last):
File "/ade/cpalanim_novthu30/fatools/tools/wlsconfig/fusion_apps_domain.py", line 2304, in ?
File "/ade/cpalanim_novthu30/fatools/tools/wlsconfig/fusion_apps_domain.py", line 2290, in runIt
File "/ade/cpalanim_novthu30/fatools/tools/wlsconfig/fusion_apps_domain.py", line 2220, in cleanUpDomain
File "/tmp/WLSTOfflineIni20330.py", line 59, in delete
at com.bea.plateng.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
at com.bea.plateng.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1490)
at com.bea.plateng.domain.script.jython.WLScriptContext.delete(WLScriptContext.java:1285)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
com.bea.plateng.domain.script.jython.WLSTException: com.bea.plateng.domain.script.jython.WLSTException: com.bea.plateng.domain.script.ScriptException: No AppDeployment object with name ESSJobTypesAPP
Anyone faced this issue ?The link that you posted is not working, saying page not found. Did you install WLS from oracle downloads site. Or did you install fusion/webcenter suite that installs the WLS also. I have installed Web Center Suite 11g that installed WLS also. I could create new Domains using config.sh without any errors using this WLS installer.
Ravi Jegga -
Getting Error while installing abap Netweaver 7.02 trial, import Abap step
INFO 2011-12-25 18:15:04.687
CJSlibModule::writeInfo_impl()
Output of C:\j2sdk1.4.2_12\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst is written to the logfile import_monitor.java.log.
WARNING 2011-12-25 18:15:36.932
CJSlibModule::writeWarning_impl()
Execution of the command "C:\j2sdk1.4.2_12\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 2, completed 34, failed 0, total 37.
Import Monitor jobs: running 2, waiting 1, completed 34, failed 0, total 37.
Loading of 'SAPSSEXC_1' import package: ERROR
Loading of 'SAPSSEXC_3' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 34, failed 2, total 37.
Import Monitor jobs: running 0, waiting 1, completed 34, failed 2, total 37.
ERROR 2011-12-25 18:15:36.932
CJSlibModule::writeError_impl()
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2011-12-25 18:15:36.948 [sixxcstepexecute.cpp:988]
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR ( Last error reported by the step :Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.).
INFO 2011-12-25 18:15:37.244 [synxcpath.cpp:815]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\__instana_tmp.xml.
WARNING 2011-12-25 18:15:37.603 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR 2011-12-25 18:15:37.603 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .
INFO 2011-12-25 18:19:54.317 [sixxcstepexecute.cpp:1073]
An error occured and the user decided to retry the current step: "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".
INFO 2011-12-25 18:19:54.317 [synxccuren.cpp:1016]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL)
lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL.
INFO 2011-12-25 18:19:54.520 [synxccuren.cpp:775]
CSyCurrentProcessEnvironmentImpl::setUser() lib=syslib module=syslib
Switched to user: Benazir\nspadm.
INFO 2011-12-25 18:19:54.660 [synxcpath.cpp:815]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\import_monitor.java.log.
INFO 2011-12-25 18:19:54.676 [synxccuren.cpp:775]
CSyCurrentProcessEnvironmentImpl::setUser() lib=syslib module=syslib
Switched to user: Benazir\nspadm.
INFO 2011-12-25 18:19:54.707
CJSlibModule::writeInfo_impl()
Output of C:\j2sdk1.4.2_12\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst is written to the logfile import_monitor.java.log.
WARNING 2011-12-25 18:20:25.080
CJSlibModule::writeWarning_impl()
Execution of the command "C:\j2sdk1.4.2_12\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 2, completed 34, failed 0, total 37.
Import Monitor jobs: running 2, waiting 1, completed 34, failed 0, total 37.
Loading of 'SAPSSEXC_1' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 34, failed 1, total 37.
Loading of 'SAPSSEXC_3' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 34, failed 2, total 37.
ERROR 2011-12-25 18:20:25.080
CJSlibModule::writeError_impl()
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2011-12-25 18:20:25.111 [sixxcstepexecute.cpp:988]
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR ( Last error reported by the step :Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.).
INFO 2011-12-25 18:20:25.408 [synxcpath.cpp:815]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\__instana_tmp.xml.
WARNING 2011-12-25 18:20:25.767 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR 2011-12-25 18:20:25.782 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .
INFO 2011-12-25 18:21:19.431 [sixxcstepexecute.cpp:1073]
An error occured and the user decided to retry the current step: "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".
INFO 2011-12-25 18:21:19.431 [synxccuren.cpp:1016]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL)
lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL.
INFO 2011-12-25 18:21:19.633 [synxccuren.cpp:775]
CSyCurrentProcessEnvironmentImpl::setUser() lib=syslib module=syslib
Switched to user: Benazir\nspadm.
INFO 2011-12-25 18:21:19.867 [synxcpath.cpp:815]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\import_monitor.java.log.
INFO 2011-12-25 18:21:19.883 [synxccuren.cpp:775]
CSyCurrentProcessEnvironmentImpl::setUser() lib=syslib module=syslib
Switched to user: Benazir\nspadm.
INFO 2011-12-25 18:21:19.930
CJSlibModule::writeInfo_impl()
Output of C:\j2sdk1.4.2_12\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst is written to the logfile import_monitor.java.log.
WARNING 2011-12-25 18:21:50.240
CJSlibModule::writeWarning_impl()
Execution of the command "C:\j2sdk1.4.2_12\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 2, completed 34, failed 0, total 37.
Import Monitor jobs: running 2, waiting 1, completed 34, failed 0, total 37.
Loading of 'SAPSSEXC_1' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 34, failed 1, total 37.
Loading of 'SAPSSEXC_3' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 34, failed 2, total 37.
ERROR 2011-12-25 18:21:50.256
CJSlibModule::writeError_impl()
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2011-12-25 18:21:50.287 [sixxcstepexecute.cpp:988]
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR ( Last error reported by the step :Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.).
INFO 2011-12-25 18:21:50.599 [synxcpath.cpp:815]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\__instana_tmp.xml.
WARNING 2011-12-25 18:21:50.973 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR 2011-12-25 18:21:50.973 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .
INFO 2011-12-25 18:21:55.154 [sixxcstepexecute.cpp:1081]
An error occured and the user decided to stop.\n Current step "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".
INFO 2011-12-25 18:22:06.995 [synxccuren.cpp:1016]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL)
lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL.
Abort execution because of
controller.userDecideToStop
INFO 2011-12-25 18:22:07.73 [synxcpath.cpp:815]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\.lastInstallationLocation.
CGuiProxy::receive(): receive error on socket 616
Dec 25, 2011 6:22:07 PM [Info]: >> Closed input stream
Dec 25, 2011 6:22:07 PM [Info]: >> Closed input stream
Dec 25, 2011 6:22:07 PM [Info]: GUI stopped.
Exit status of child: 2HI,
CONFIG: 2011-12-25 12:51:20
List of packages with table structure: 'SAP0000'.
CONFIG: 2011-12-25 12:51:20
List of packages with views: 'SAPVIEW'.
TRACE: 2011-12-25 12:51:20 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\DDLADA.TPL' template file is started.
INFO: 2011-12-25 12:51:20 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\DDLADA.TPL' template file is successfully completed.
Primary key creation: before load.
Index creation: after load.
INFO: 2011-12-25 12:51:20
Data codepage 4103 is determined using TOC file 'D:\NWABAPTRIAL70206_64\NWABAPTRIAL70206_64_EXPORT\NWABAPTRIAL70206_64\SAP_NetWeaver_702e_Export\DATA_UNITS\EXP1\DATA\ATAB.TOC' for package 'ATAB'.
TRACE: 2011-12-25 12:51:20 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC_1' import package is started.
TRACE: 2011-12-25 12:51:20 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC_3' import package is started.
TRACE: 2011-12-25 12:51:20 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSEXC_1' import package into database:
C:\usr\sap\NSP\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSSEXC_1.cmd -dbcodepage 4103 -l SAPSSEXC_1.log -nolog -c 50000 -force_repeat -loadprocedure dbsl
TRACE: 2011-12-25 12:51:20 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSEXC_3' import package into database:
C:\usr\sap\NSP\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSSEXC_3.cmd -dbcodepage 4103 -l SAPSSEXC_3.log -nolog -c 50000 -force_repeat -loadprocedure dbsl
ERROR: 2011-12-25 12:51:20 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC_1' import package is interrupted with R3load error.
Process 'C:\usr\sap\NSP\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSSEXC_1.cmd -dbcodepage 4103 -l SAPSSEXC_1.log -nolog -c 50000 -force_repeat -loadprocedure dbsl' exited with return code 2.
For mode details see 'SAPSSEXC_1.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2011-12-25 12:51:20 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC_3' import package is interrupted with R3load error.
Process 'C:\usr\sap\NSP\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSSEXC_3.cmd -dbcodepage 4103 -l SAPSSEXC_3.log -nolog -c 50000 -force_repeat -loadprocedure dbsl' exited with return code 2.
For mode details see 'SAPSSEXC_3.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2011-12-25 12:51:50
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2011-12-25 12:51:50
2 error(s) during processing of packages.
INFO: 2011-12-25 12:51:50
Import Monitor is stopped.
THANKS
Maybe you are looking for
-
Self billing invoice with input tax code
Hello experts, we are currently trying to implement a billing procedure with credit memos within the module SD. In this set-up the recipient of a service (company using the SAP) creates a credit memo for the renderer of a service (a debitor in SAP) s
-
Hi Guys, Is there a way of transferring data (music, movies etc) from an external harddrive directly to an iPad Mini? The reason I ask, is I'm going travelling and don't want to take my macbook with me - but I have a lot of music, movies etc that I w
-
PSC 2355 all in one stopped printing after windows 8.1 upgrade scan is OK.
I have a HP psc2355 printer which was working happliy in Window 8. I downloaded and installed 8.1 from windows store and the printer no longer works! With the printer status window open (via the windows control panel) the document detail appear brie
-
TS2570 Disk no longer recognized in disk utility
Long story. I updated OS X to Lion 2 weeks ago on my Mid 2009 13" Macbook Pro and everything seemed to be in perfect order. 3 days ago, when I opened the Macbook to check my email, the screen was frozen. No problem right? Just reboot. The only th
-
HOW DO I INSTALL PREMIERE PRO ON MAC?
HOW DO I INSTALL PREMIERE PRO ON MAC?