Error while installing Oracle 10G Grid control in RHEL

I was installing Oracle 10G Grid control in RHEL. Got the following error. Any idea what this means and what is the remedy?
=======================================
Output generated from configuration assistant "Oracle Net Configuration Assistant":
/home/oracle/jre/1.1.8/bin/../bin/i686/native_threads/jre: relocation error: /home/oracle/jre/1.1.8/bin/../lib/i686/native_threads/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
Configuration assistant "Oracle Net Configuration Assistant" failed
=======================================
regards,
Anjan

I saw this once but I forgot how I solved it. I believe that I made a softlink to the libc.so.6 from another libc. Have a look on Metalink, becauses I've got the idea for my solution there.
cu
Andreas

Similar Messages

  • Error while installing oracle 10g grid on windows

    hi all,
    when i am installing oracle 10g grid i got the error that
    "Configuration assistant "OMS Configuration" failed "
    when i saw the log
    it has been mentioned the failed to create repos user.
    this is the out put of the log
    [14-02-2008 11:51:55] Enter SYS user's password :
    [14-02-2008 11:51:55]
    [14-02-2008 11:51:55] Enter repository user password :
    [14-02-2008 11:51:55]
    [14-02-2008 11:51:55] Enter MetaLink user password :
    [14-02-2008 11:51:55]
    [14-02-2008 11:51:55] Getting temporary tablespace from database...
    [14-02-2008 11:51:55] Found temporary tablespace: TEMP
    [14-02-2008 11:51:55] Checking SYS Credentials ...
    [14-02-2008 11:51:56] OK.
    [14-02-2008 11:51:56] Checking DB Init Parameters ...
    [14-02-2008 11:51:56] OK.
    [14-02-2008 11:51:56] Checking for Repos User ...
    [14-02-2008 11:51:56] Does not Exist.
    [14-02-2008 11:51:56] Loading necessary DB objects ...
    [14-02-2008 11:51:56] Checking DB Object (DBMS_SHARED_POOL , PACKAGE) ...
    [14-02-2008 11:51:56] Done Loading necessary DB objects
    [14-02-2008 11:51:56] Creating repos user ...
    DECLARE
    ERROR at line 1:
    ORA-01119: error in creating database file
    'E:\oraclegrid\oms10g\oradata\mgmt.dbf'
    ORA-27040: file create error, unable to create file
    OSD-04002: unable to open file
    O/S-Error: (OS 3) The system cannot find the path specified.
    ORA-06512: at line 44
    [14-02-2008 11:51:57] Failed.
    [14-02-2008 11:51:57] Repository Creation failed. Failed to create Repos User.
    all users and everyone has full permission on this folder, i don't know why it is giving,
    please any one help me out i am stuck in the middle of the installation
    oracle 10g grid version is 10.1
    please reply to this
    Regards,
    Veeresh S

    this is the output what i get in oui:configuration assistants
    Output generated from configuration assistant "OMS Configuration" (attempt 6):
    Command = oracle.sysman.emcp.oms.OmsPlugIn -configureOms
    Operation Stopping OPMN Processes is in progress.
    Operation EM Deploying is in progress.
    Operation Creating OMS Respository is in progress.
    Configuration assistant "OMS Configuration" failed
    The "E:\oraclegrid\agent10g\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-------------------------------------------------------------------------------
    when i saw this E:\oraclegrid\agent10g\cfgtoollogs\configToolFailedCommands file
    the below 2 lines was mentioned in that file.
    rem Copyright (c) 1999, 2006, Oracle. All rights reserved.
    oracle.sysman.emcp.agent.AgentPlugIn
    this below log i got in E:\oraclegrid\agent10g\cfgtoollogs\cfgfw\CfmLogger_2008-02-14_10-28-34-AM.log file
    i have pasted last lines of the files.
    INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 0 have been completed with status=true
    INFO: oracle.sysman.top.oms:deployOms:Already deployed, skipped.
    INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 1 have been completed with status=true
    INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 2 have been completed with status=true
    INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=E:\oraclegrid\oms10g\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=A1MD04823)(PORT=1521)))(CONNECT_DATA=(SID=q))) -action drop -repos_user SYSMAN -output_file E:\oraclegrid\oms10g\sysman\log\emca_repos_drop12_19_36.log
    INFO: oracle.sysman.top.oms:PerformSecureCommand:drain:Spaced passwords by=100 ms
    INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:E:\oraclegrid\oms10g\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=A1MD04823)(PORT=1521)))(CONNECT_DATA=(SID=q))) -action drop -repos_user SYSMAN -output_file E:\oraclegrid\oms10g\sysman\log\emca_repos_drop12_19_36.log have completed with exitCode=0
    INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
    'Enter SYS user's password :
    Getting temporary tablespace from database...
    Found temporary tablespace: TEMP
    Checking SYS Credentials ... OK.
    Dropping the repository..
    Quiescing DB ... Done.
    Checking for Repos User ... Does not Exist.
    Repos User does not exist ... Continuing with cleanup ...
    Dropping Roles/Synonymns/Tablespaces ... Done.
    Unquiescing DB ... Done.
    Dropped Repository Successfully.
    INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
    ''stty' is not recognized as an internal or external command,
    operable program or batch file.
    'stty' is not recognized as an internal or external command,
    operable program or batch file.
    INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=E:\oraclegrid\oms10g\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=A1MD04823)(PORT=1521)))(CONNECT_DATA=(SID=q))) -action create -repos_user SYSMAN -metalink_username NOTAVAILABLE_ -output_file E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log -ecm_datafile E:\oraclegrid\oms10g\oradata\mgmt_ecm_depot1.dbf -datafile E:\oraclegrid\oms10g\oradata\mgmt.dbf
    INFO: oracle.sysman.top.oms:PerformSecureCommand:drain:Spaced passwords by=200 ms
    INFO: oracle.sysman.top.oms:RepManager Create Repository Error = E:\oraclegrid\oms10g\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=A1MD04823)(PORT=1521)))(CONNECT_DATA=(SID=q))) -action create -repos_user SYSMAN -metalink_username NOTAVAILABLE_ -output_file E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log -ecm_datafile E:\oraclegrid\oms10g\oradata\mgmt_ecm_depot1.dbf -datafile E:\oraclegrid\oms10g\oradata\mgmt.dbf . Please check the log file at 12
    'Enter SYS user's password :
    Enter repository user password :
    Enter MetaLink user password :
    Getting temporary tablespace from database...
    Found temporary tablespace: TEMP
    Checking SYS Credentials ... OK.
    Checking DB Init Parameters ... OK.
    Checking for Repos User ... Does not Exist.
    Loading necessary DB objects ...
    Checking DB Object (DBMS_SHARED_POOL , PACKAGE) ... Exists.
    DBMS POOL package exists.
    Done Loading necessary DB objects
    Creating repos user ... Failed.
    Repository Creation failed. Failed to create Repos User.
    ''stty' is not recognized as an internal or external command,
    operable program or batch file.
    'stty' is not recognized as an internal or external command,
    operable program or batch file.
    'stty' is not recognized as an internal or external command,
    operable program or batch file.
    'stty' is not recognized as an internal or external command,
    operable program or batch file.
    'stty' is not recognized as an internal or external command,
    operable program or batch file.
    'stty' is not recognized as an internal or external command,
    operable program or batch file.
    INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:E:\oraclegrid\oms10g\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=A1MD04823)(PORT=1521)))(CONNECT_DATA=(SID=q))) -action create -repos_user SYSMAN -metalink_username NOTAVAILABLE_ -output_file E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log -ecm_datafile E:\oraclegrid\oms10g\oradata\mgmt_ecm_depot1.dbf -datafile E:\oraclegrid\oms10g\oradata\mgmt.dbf have completed with exitCode=12
    INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
    'Enter SYS user's password :
    Enter repository user password :
    Enter MetaLink user password :
    Getting temporary tablespace from database...
    Found temporary tablespace: TEMP
    Checking SYS Credentials ... OK.
    Checking DB Init Parameters ... OK.
    Checking for Repos User ... Does not Exist.
    Loading necessary DB objects ...
    Checking DB Object (DBMS_SHARED_POOL , PACKAGE) ... Exists.
    DBMS POOL package exists.
    Done Loading necessary DB objects
    Creating repos user ... Failed.
    Repository Creation failed. Failed to create Repos User.
    INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
    ''stty' is not recognized as an internal or external command,
    operable program or batch file.
    'stty' is not recognized as an internal or external command,
    operable program or batch file.
    'stty' is not recognized as an internal or external command,
    operable program or batch file.
    'stty' is not recognized as an internal or external command,
    operable program or batch file.
    'stty' is not recognized as an internal or external command,
    operable program or batch file.
    'stty' is not recognized as an internal or external command,
    operable program or batch file.
    INFO: oracle.sysman.top.oms:RepManager Create Repository Error = 12. Please check the log file at E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log
    WARNING: oracle.sysman.top.oms:EmcpPlug:startProcessing:Exception in runner=RepManager Create Repository Error = 12. Please check the log file at E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log
    INFO: oracle.sysman.top.oms:EmcpPlug:invoke:Completed EmcpPlug invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=2:microstep=0
    INFO: oracle.sysman.top.oms:Internal PlugIn for {Micro Step state:step:2:configuration in CfmAggregateInstance: oracle.sysman.top.oms:10.2.0.2.0:common:family=CFM:oh=E:\oraclegrid\oms10g:label=7} failed with an unhandled exception:
    java.lang.Exception: RepManager Create Repository Error = 12. Please check the log file at E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log
         at oracle.sysman.emcp.util.EmcpPlug.startProcessing(EmcpPlug.java:389)
         at oracle.sysman.emcp.util.EmcpPlug.invoke(EmcpPlug.java:360)
         at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:509)
         at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:121)
         at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
         at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
    INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has failed its perform method
    INFO: OuiConfigVariables:IAction.perform() was called on {Action state:OUICA in CfmAggregateInstance: OuiConfigVariables:1.0.0.0.0:common:family=CFM:oh=E:\oraclegrid\oms10g:label=7}
    INFO: Framework waiting for Action to complete at 12:19:41.469
    INFO: CfwProgressMonitor:actionProgress:About to perform Action=OUICA Status=is running with ActionStep=0 stepIndex=0 microStep=0
    INFO: OuiConfigVariables:About to execute plug-in OUI_CA
    INFO: OuiConfigVariables:The plug-in OUI_CA is running
    INFO: OuiConfigVariables:Launching CmdExec
    INFO: OuiConfigVariables:ExitCode=0
    INFO: OuiConfigVariables:The plug-in OUI_CA executed as attached=true in separate process with exitcode=0
    INFO: OuiConfigVariables:The plug-in OUI_CA has successfully been performed
    INFO: done waiting for Action from 12:19:41.469
    INFO: Cfm.save() was called
    INFO: Cfm.save(): 15 aggregate instances saved
    please anyone help, i have given all details, i want to install this grid as soon as possible

  • FILE NOT FOUND ERROR WHILE INSTALLING ORACLE EM GRID CONTROL 10.2.0.1

    FILE NOT FOUND ERROR ON FILES: generalstup, seedstup during the setup phase and when i click ignore from a list of cancel, retry and ignore it moves to the configuration phase and rapidly moves from 63% to 100% and gives the error OUI-10133 invalid staging area. i have tried the install 3 times and dont know what the problem is. i am doing the oracle EM GC INSTALL WITH NEW DATABASE OPTION. i downloaded the full version disks 1-3 from the website:http://www.oracle.com/technology/software/products/oem/index.html
    Enterprise Manager 10g Grid Control Release 2 (v10.2.x)
    Full Installers (Agent, Repository, OMS, and Management Packs)
    Oracle Enterprise Manager 10g Grid Control Release 2 (10.2.0.1) for Linux x86
    when this is extracted it leaves me with Disk1, 2, and 3
    install started from 1, then it later asks for two whick happens to instead be but under Dist 3-but there are two disk2's under Disk 3- one under oms and one under rdbms folder. i have tried both and alas same errors
    i even triwd the same download from edelivery.oracle.com and gives the same madness
    am stuck.

    i followed the link and all the instructions things seemed to go well: it still asked for two files i did not have or could not locate: first its asked for generalstub, then it asked for seedstup and then generalstup again. at this point the installation was at 67% and had passed the link succesful stage and was at the setup succeful stage. when i clicked ignore on generalstub, seedstup and then generalstup again it quicly moved to 100% and never took me to the stage for me to run oraInstroot.sh and allroot.sh
    the configuration assistant stage never cameup and it skipped to the page Specify Repository Database Configuration
    where it asked for repository database hostname port, service/sid and SYSMAN password and also manament service security password. whe i input all the infor mation it will give errors. i have tries deleting all oracle 3 or 4 times and all files that oracle has and repeated the process and am always stuck here.
    error reads :
    -error cheching the existence of the SYSMAN user in Management repository
    -exception occured while connecting to database . please check the connection details you specified and retry
    -io exception connection refused: (DESCRIPTION=(TMP=)(VSNUMM=168821760)(ERR=12514)(ERRO_STACK=(ERROR=(CODE=12514)(EMFI=4))))
    REP DB HOSTNAME:SA-OMS-01
    PORT:1521
    SERVICE/SID:OMSDB01
    SYSMAN PASSWORD:PASS
    THE REST I PUT PASS AS PASSWORD
    NOT SURE WHAT TO DO NEXT.

  • Error while installing Oracle 10g on Fedora Core 1

    Error while installing Oracle 10g on Fedora Core 1. After 40% of the Installation is thru, the progress bar is showing 40%, it gives error "Not connected to Oracle" and the installation has to be terminated.
    We have tried by using the on-line procedure and changing the required script to make believe it as said.

    Are you createing DB also???

  • Error while installing oracle 10g on AIX

    I am receiving the following error while installing oracle 10g on AIX..
    error in invoking target 'relink' of makefile 'u01/app/oracle/product/10.2.0/orcl/precomp/lib/ins_precomp.mk'..
    i am installing enterprise edition. pl help

    Hi;
    What is AIX version?
    Please see:
    Installing 10g On Aix 5.3:'Error In Invoking Target 'Relink' Of Makefile ...' [ID 309668.1]
    AIX: On Silent Install, Getting Several 'Error In Invoking Target' Messages [ID 351380.1]
    "Error invoking target ... of makefile ... " Errors While Installing 8.1.6 [ID 113781.1]
    Please also check below and be sure you have all prereq. on your server:
    Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
    Regard
    Helios

  • "Error In Writing to directory ..."  getting the error while installing oracle 10g in laptop

    Hi
    I thought I'd make my first post a hijack of a vaguely related thread,
    then some kind moderator could separate it out and branch it off to a post of its own.
    I'm not even sure this is in the proper forum.
    But anyhow ...
    i am getting problem while installing oracle 10g in laptop its showing error as "Error in Writing to Directory C:\Users\Accent.Muthu\Appdata\Local\temp\OraInstall2011-03-03-10-51-53 AM.
    Please ensure that the directory is writable and has atleast of 45 MB of disk space.Installation can not continue.
    so please tell me the solution as soon as possible
    thanks,
    arshad ayub

    Try the few resolutions mentioned here -
    forms 10g installation  error in writing to directory
    Specially -
    do not try to install from directory which has a space in its path
    TMP and TEMP environment variables are set correctly, preferably to C:/tempRegards,
    Anuj

  • Error while installing oracle 10g on centos 5.6 32 Bit

    Hi All,
    Please help me with the issue I facing while installing oracle 10g on centos 5.6 32bit. I did lot of research on google but I am getting same answer...the libXp package is missing, but I have check it...its already installed.
    [[email protected] ~]# find / -name libXp.so.6
    /usr/lib/libXp.so.6
    /usr/lib64/libXp.so.6
    echo $DISPLAY
    <ipaddress>:0.0
    [[email protected] database]$ DISPLAY=<ipaddress>:0.0; export DISPLAY
    [[email protected] database]$ id
    uid=500(oracle) gid=500(oinstall) groups=500(oinstall),501(dba) context=root:system_r:unconfined_t:SystemLow-SystemHigh
    Below is the error message I am getting :
    [email protected] database]$ ./runInstaller
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-27_05-37-17PM. Please wait ...[[email protected] database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-06-27_05-37-17PM/jre/1.4.2/lib/i386/libawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
         at java.lang.ClassLoader$NativeLibrary.load(Native Method)
         at java.lang.ClassLoader.loadLibrary0(Unknown Source)
         at java.lang.ClassLoader.loadLibrary(Unknown Source)
         at java.lang.Runtime.loadLibrary0(Unknown Source)
         at java.lang.System.loadLibrary(Unknown Source)
         at sun.security.action.LoadLibraryAction.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
         at sun.awt.DebugHelper.<clinit>(Unknown Source)
         at java.awt.Component.<clinit>(Unknown Source)
    I found some suggestion on google and tried to not use ip address in DISPLAY settings...
    if I am using 0.0 instead of IP below eg.
    [[email protected] database]$ DISPLAY=:0.0; export DISPLAY
    The error I am receiving differnt error
    [[email protected] database]$ ./runInstaller
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-27_05-34-40PM. Please wait ...
    DISPLAY not set. Please set the DISPLAY and try again.
    Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
    - For csh:                % setenv DISPLAY 192.168.1.128:0.0
    - For sh, ksh and bash:      $ DISPLAY=192.168.1.128:0.0; export DISPLAY
    Use the following command to see what shell is being used:
         echo $SHELL
    Use the following command to view the current DISPLAY environment variable setting:
         echo $DISPLAY
    - Make sure that client users are authorized to connect to the X Server.
    To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
    % xhost +
    To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
         % <full path to xclock.. see below>
    If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
    Typical path for xclock: /usr/X11R6/bin/xclock
    [[email protected] database]$ echo $SHELL
    /bin/bash
    Please help me.

    satish.ygl wrote:
    Hi,
    I am getting the same error when i am applying patchset to 10201 to 10204. I am using RedHat Linux 4 version and I tried set $DISPLAY=<hostname/ip address>:0.0 and export=DISPLAY
    #xhost + and checked $PATH this is also is correct
    I did these steps still i am getting the following error
    pen an xterm, dtterm or xconsole as the user that started the session and type the following command:
    % xhost +
    To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
    % <full path to xclock... see below>
    If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
    Typical path for 'xclock': '/usr/X11R6/bin/xclock'
    Please help me in this scenario.
    thank You,
    Sri
    Edited by: satish.ygl on Oct 30, 2012 7:49 PMyou must log onto the DB Server as below (or functional equivalent)
    ssh -X [email protected]_Server
    & the first & only command after logging onto the DB Server should be as below
    xclock
    If/when xclock fails, then OUI will fail.

  • Error while installing Oracle 10g on Solaris 9 x86

    Hi all,
    I got several error after install oracle 10g. After I run the root.sh. It prompt :
    Starting Oracle CSS service under init(1M)
    Expecting the CRS daemons to be up within 120 seconds.
    Giving up: Oracle CSS stack appears NOT to be running.
    and when I start sqlplus, it prompt:
    ERROR:
    ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Intel SVR4 UNIX Error: 2: No such file or directory
    and following the error message prompt every minutes.
    "oracle: (Oracle CSSD will be run out of init)"
    "root: Failure in CSS initialization opening OCR."
    I don't think reinstall oracle will solve my problem if I don't figure out what going wrong. Could anyone tell me what I need to do? Thanks very much for helping.
    Cheers,
    Alex

    Check also if the t-bit is set:
    [[email protected] ~]# ls -dl /tmp
    drwxrwxrwt 11 root root 4096 Apr 10 11:44 /tmp
    This is needed to mark the filesystem/directory as temporary.
    Sometimes this can cause such problems also
    Command: chmod +t   /tmp                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Issues while installing ORACLE 10g R2 RAC on RHEL 5.3

    i am installing oracle 10g R2 RAC on RHEL 5.3 in a test environment. my aim was to install using ASM.
    i went through the pre-requisites ok before beginning with the installation.
    since RHEL 5.3 doesnt support raw devices i used
    http://www.idevelopment.info/data/Unix/Linux/LINUX_ConnectingToAniSCSITargetWithOpen-iSCSIInitiatorUsingLinux.shtml#Configure%20iSCSI%20Initiator%20and%20New%20Volume
    udev to configure shared storage. my storage is on openfiler as a iSCSI target.
    fdisk -l on both nodes shows the shared drives.
    [[email protected] ~]# fdisk -l
    Disk /dev/sda: 21.4 GB, 21474836480 bytes
    255 heads, 63 sectors/track, 2610 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
       Device Boot      Start         End      Blocks   Id  System
    /dev/sda1   *           1          13      104391   83  Linux
    /dev/sda2              14        2053    16386300   8e  Linux LVM
    /dev/sda3            2054        2372     2562367+  82  Linux swap / Solaris
    Disk /dev/sdd: 10.5 GB, 10502537216 bytes
    64 heads, 32 sectors/track, 10016 cylinders
    Units = cylinders of 2048 * 512 = 1048576 bytes
       Device Boot      Start         End      Blocks   Id  System
    /dev/sdd1               1       10016    10256368   83  Linux
    Disk /dev/sdb: 10.5 GB, 10536091648 bytes
    64 heads, 32 sectors/track, 10048 cylinders
    Units = cylinders of 2048 * 512 = 1048576 bytes
       Device Boot      Start         End      Blocks   Id  System
    /dev/sdb1               1       10048    10289136   83  Linux
    Disk /dev/sdc: 10.5 GB, 10536091648 bytes
    64 heads, 32 sectors/track, 10048 cylinders
    Units = cylinders of 2048 * 512 = 1048576 bytes
       Device Boot      Start         End      Blocks   Id  System
    /dev/sdc1               1       10048    10289136   83  Linux
    Disk /dev/sdf: 10.5 GB, 10569646080 bytes
    64 heads, 32 sectors/track, 10080 cylinders
    Units = cylinders of 2048 * 512 = 1048576 bytes
       Device Boot      Start         End      Blocks   Id  System
    /dev/sdf1               1       10080    10321904   83  Linux
    Disk /dev/sde: 10.5 GB, 10502537216 bytes
    64 heads, 32 sectors/track, 10016 cylinders
    Units = cylinders of 2048 * 512 = 1048576 bytes
       Device Boot      Start         End      Blocks   Id  System
    /dev/sde1               1       10016    10256368   83  Linux
    [[email protected] ~]# ls -l /dev/iscsi/arpl*
    /dev/iscsi/arpl1:
    total 0
    lrwxrwxrwx 1 oracle oinstall  9 Jun 30 12:58 part -> ../../sde
    lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sde1
    /dev/iscsi/arpl2:
    total 0
    lrwxrwxrwx 1 oracle oinstall  9 Jun 30 12:58 part -> ../../sdd
    lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdd1
    /dev/iscsi/arpl3:
    total 0
    lrwxrwxrwx 1 oracle oinstall  9 Jun 30 12:58 part -> ../../sdb
    lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdb1
    /dev/iscsi/arpl4:
    total 0
    lrwxrwxrwx 1 oracle oinstall  9 Jun 30 12:58 part -> ../../sdc
    lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdc1
    /dev/iscsi/arpl5:
    total 0
    lrwxrwxrwx 1 oracle oinstall  9 Jun 30 12:58 part -> ../../sdf
    lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdf1
    [[email protected] ~]# configuring udev results in the drives being mapped to persistent drive names eg. /dev/iscsi/arpl1/part1
    still when i enter the name of the raw device which i have created i get the following error. please help
    Image: !http://img91.imageshack.us/img91/7448/oracle.png!

    did you check this
    http://download-west.oracle.com/docs/cd/B19306_01/install.102/b14203/storage.htm#BABBHECD
    http://download.oracle.com/docs/cd/B28359_01/install.111/b28263/storage.htm#CDEBFDEH
    also before you do what is suggested on the url posted by Mufalani,
    it seems that you should do the following:
    Check existence of udev raw mapping rule file /etc/udev/rules.d/60-raw.rules
    On RH/EL5, udev raw mapping rule file /etc/udev/rules.d/60-raw.rules should exist by default as part of the util-linux package, for example:
    # ls /etc/udev/rules.d/60-raw.rules
    /etc/udev/rules.d/60-raw.rulesCreate a custom udev raw mapping rule file, /etc/udev/rules.d/61-oracleraw.rules say, for example:
    # touch /etc/udev/rules.d/61-oracleraw.rules3b. Add udev raw binding rules to /etc/udev/rules.d/61-oracleraw.rules file
    Add the udev raw binding rules to the /etc/udev/rules.d/61-oracleraw.rules file, for example:
    # cat /etc/udev/rules.d/61-oracleraw.rules
    # Raw bind to Oracle Clusterware devices
    ACTION=="add", KERNEL=="sd*", PROGRAM=="/sbin/scsi_id", RESULT=="360a98000686f6959684a453333524174", RUN+="/bin/raw /dev/raw/raw1 %N"
    ACTION=="add", KERNEL=="sd*", PROGRAM=="/sbin/scsi_id", RESULT=="360a98000686f6959684a453333524179", RUN+="/bin/raw /dev/raw/raw2 %N"If migrating to RHEL5/OEL5 from an earlier Linux version that relied on /etc/sysconfig/rawdevices file for persistent raw device bindings, the following script can be used as a basis for generating your RHEL5/OEL5 udev rules. Note, the script does not factor device name persistency.
    #!/bin/bash
    grep -v "^ *#" /etc/sysconfig/rawdevices | grep -v "^$" | while read dev major minor ; do
    if [ -z "$minor" ]; then
    echo "ACTION==\"add\", KERNEL==\"${major##/dev/}\", RUN+=\"/bin/raw $dev %N\""
    else
    echo "ACTION==\"add\", ENV{MAJOR}==\"$major\", ENV{MINOR}==\"$minor\", RUN+=\"/bin/raw $dev %M %m\""
    fi
    done

  • Error While Installing ORACLE 10g in Redhat Linux 5.0

    Hi all,
    Anybody please guide me regarding the posted error.
    I'm trying to install ORACLE 10g in Redhat Linux 5.0 and finding error as "Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-10-15_09-20-56PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
    at java.lang.ClassLoader$NativeLibrary.load(Native Method)
    at java.lang.ClassLoader.loadLibrary0(Unknown Source)
    at java.lang.ClassLoader.loadLibrary(Unknown Source)
    at java.lang.Runtime.loadLibrary0(Unknown Source)
    at java.lang.System.loadLibrary(Unknown Source)
    at sun.security.action.LoadLibraryAction.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
    at sun.awt.DebugHelper.<clinit>(Unknown Source)
    at java.awt.Component.<clinit>(Unknown Source)
    I tired a lot to sort it out but unable to resolve.So please tell me the possible ways.
    I appreciate all types of clarifications...
    Thanks in Advance
    Sajeev George

    Sajeevcmc wrote:
    Hi,
    Thanks for the reply.
    Could you please tell me the rpm full name and where i can download the same?
    Thanks in Advance
    SAJEEV GEORGEYou need to have the following packages installed already before starting Oracle installation
    http://download.oracle.com/docs/cd/B19306_01/install.102/b15669/pre_install.htm#sthref80
    binutils-2.15.92.0.2-10.EL4
    compat-db-4.1.25-9
    control-center-2.8.0-12
    gcc-3.4.3-9.EL4
    gcc-c++-3.4.3-9.EL4
    glibc-2.3.4-2
    glibc-common-2.3.4-2
    gnome-libs-1.4.1.2.90-44.1
    libstdc++-3.4.3-9.EL4
    libstdc++-devel-3.4.3-9.EL4
    make-3.80-5
    pdksh-5.2.14-30
    sysstat-5.0.5-1
    xscreensaver-4.18-5.rhel4.2
    And from the following link, you can get the same list:
    http://www.puschitz.com/InstallingOracle10g.shtml (Go to Checking Software Packages (RPMs))
    And from my installation guide you can easily install Oracle on Linux by following step by step instruction
    [Step by Step Installing Oracle Database 10g Release 2 on Linux (CentOS) and AUTOMATE the installation using Linux Shell Script|http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

  • Error while installing Oracle 10g on CentOS 5.5

    Hello,
    I have been using the following url to install oracle 10g R2:
    http://onaxer.com/blog/blog/tag/oracle-10g-r2-installtion-on-centos-5-5rhel/
    I have copied the oracle 10g R2 linux version from windows to linux using FTP.
    All the installer requirements have been met, but i'm getting the following error while running the installation:
    [[email protected] database]$ ./runInstaller
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-02-21_03-11-44PM. Please wait ...[[email protected] database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2011-02-21_03-11-44PM/jre/1.4.2/lib/i386/libawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
    at java.lang.ClassLoader$NativeLibrary.load(Native Method)
    at java.lang.ClassLoader.loadLibrary0(Unknown Source)
    at java.lang.ClassLoader.loadLibrary(Unknown Source)
    at java.lang.Runtime.loadLibrary0(Unknown Source)
    at java.lang.System.loadLibrary(Unknown Source)
    at sun.security.action.LoadLibraryAction.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
    at sun.awt.DebugHelper.<clinit>(Unknown Source)
    at java.awt.Component.<clinit>(Unknown Source)
    Any help would be greatly appreciated.
    Thanks.

    Hi,
    Download & Install the following rpm and retry oracle installation.
    http://oss.oracle.com/projects/compat-oracle/dist/files/Enterprise_Linux/xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386.rpm
    installation
    rpm -i xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386.rpm
    After the RPM, is installed, you will also need to override the /usr/lib/libXtst.so.6 with the one from /usr/X11R6/lib/libXtst.so.6.
    As root, issue the commands:
    mv /usr/lib/libXtst.so.6 /usr/lib/libXtst.so.6.ORG
    ln –s /usr/X11R6/lib/libXtst.so.6 /usr/lib/libXtst.so.6
    Pubudu

  • Error while installing ORACLE 10G on Windows

    Dear All,
    Previously i had installed ORACLEM 9i. I deinstalled using UNIVERSAL INSTALLER .Now when i try to install ORACLE 10g it is giving error
    ERROR : ERROR IN Writing to direcotory c:\documets~\rajeshrr~1\temp\Orainstall2009-08-23.Please ensure direcotory is writable and has alteast 45mb disk space.Installaion can not continue.
    While installing i have credential of administrator i.e. for rajeshr is in ADMINISTRTAOR group.
    Please inform any thing need to be need from my side.
    Thanks in advance.
    Regards,
    Rajesh.
    Edited by: Rajesh.Rathod on Aug 23, 2009 6:17 AM

    Rajesh.Rathod wrote:
    Dear All,
    Previously i had installed ORACLEM 9i. I deinstalled using UNIVERSAL INSTALLER .Now when i try to install ORACLE 10g it is giving error Which Oracle 10g on which Windows version ?
    Nicolas.

  • DBCA errors while installing Oracle 10g on Windows 7

    Hi all,
    I'm trying to install Oracle 10g database on Windows 7 operating system. Software is installed without any error. But it gets following exceptions while running dbca from $ORACLE_HOME/bin/ directory...
    java.lang.NullPointerException
    at oracle.sysman.oii.oiix.OiixPathOps.concatPath(OiixPathOps.java:553)
    at oracle.sysman.oii.oiic.OiicStandardInventorySession.updateProperties(
    OiicStandardInventorySession.java:426)
    at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS
    tandardInventorySession.java:254)
    at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS
    tandardInventorySession.java:229)
    at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS
    tandardInventorySession.java:178)
    at oracle.sysman.emcp.util.OUIInventoryUtil.getInstallInventory(OUIInven
    toryUtil.java:117)
    at oracle.sysman.emcp.util.OUIInventoryUtil.getAllCentralAgentHomeLoc(OU
    IInventoryUtil.java:586)
    at oracle.sysman.emcp.util.CentralAgentUtil.getCentralAgentHomeAndURL(Ce
    ntralAgentUtil.java:296)
    at oracle.sysman.emcp.EMConfig.getCentralAgentHomeAndURL(EMConfig.java:6
    16)
    at oracle.sysman.assistants.util.OsUtilsBase.enumerateAgents(OsUtilsBase
    .java:1638)
    at oracle.sysman.assistants.dbca.ui.ManagementOptionsPage.initializePage
    (ManagementOptionsPage.java:402)
    at oracle.sysman.assistants.util.wizard.WizardPageExt.onSetActive(Wizard
    PageExt.java:94)
    at oracle.sysman.assistants.dbca.ui.ManagementOptionsPage.onSetActive(Ma
    nagementOptionsPage.java:482)
    at oracle.sysman.assistants.util.wizard.WizardExt.wizardSelectionChanged
    (WizardExt.java:166)
    at oracle.ewt.wizard.BaseWizard.processWizardEvent(Unknown Source)
    at oracle.ewt.wizard.BaseWizard.processEventImpl(Unknown Source)
    at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
    at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
    at oracle.ewt.wizard.BaseWizard.selectPage(Unknown Source)
    at oracle.ewt.wizard.BaseWizard.doNext(Unknown Source)
    at oracle.sysman.assistants.util.wizard.WizardExt.doNext(WizardExt.java:
    237)
    at oracle.ewt.wizard.BaseWizard$Action.actionPerformed(Unknown Source)
    at oracle.ewt.button.PushButton.processActionEvent(Unknown Source)
    at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
    at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
    at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
    at oracle.ewt.button.PushButton.activate(Unknown Source)
    at oracle.ewt.lwAWT.AbstractButton.processMouseReleased(Unknown Source)
    at oracle.ewt.lwAWT.AbstractButton.processMouseEvent(Unknown Source)
    at java.awt.Component.processEvent(Component.java:4897)
    at java.awt.Container.processEvent(Container.java:1569)
    at oracle.ewt.lwAWT.LWComponent.processEventImpl(Unknown Source)
    at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
    at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
    at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
    at java.awt.Component.dispatchEventImpl(Component.java:3615)
    at java.awt.Container.dispatchEventImpl(Container.java:1627)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483
    at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
    at java.awt.Container.dispatchEventImpl(Container.java:1613)
    at java.awt.Window.dispatchEventImpl(Window.java:1606)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
    read.java:201)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
    ad.java:151)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
    It might be possible that I'm using wrong installation source for the same. It would be nice if anyone can lemme know which link from http://download.oracle.com to access for Oracle 10g R2 source on Windows 7?
    Can anyone pls help me out to solve this query??
    Thanks in anticipation.

    At which point did it occur to you that Windows 7 was developed and released after any version of Oracle 10g and was both uncertified and untested on this platform? ;)
    10g will fall off the cliff into desupport in just two weeks. Toss it out and install 11.2.0.1.

  • Getting Error while installing oracle 10g 1.0.2.0 on Redhat - linux 64bit

    I am installing oracle 10g on Redhat 64bit (VM ware). In the middle it gives some error oracle Net services cancelled. Please see the error message below and advise.
    Configuration assistant "Oracle Net Configuration Assistant" was canceled.
    The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
    This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
    Output generated from configuration assistant "Oracle Net Configuration Assistant":
    Command = /u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java -Duser.dir=/u01/app/oracle/product/10.2.0/db_1/network/jlib -classpath /u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/i18n.jar:/u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/rt.jar:/
    u01/app/oracle/product/10.2.0/db_1/jlib/ewt3.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ewtcompat-3_3_15.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/netcfg.jar:/u01/app/oracle/product/10.2.0/db_1/network/jlib/netcam.jar:/
    u01/app/oracle/product/10.2.0/db_1/network/jlib/netca.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/help4.jar:/
    u01/app/oracle/product/10.2.0/db_1/jlib/jewt4.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/oracle_ice.jar:/
    u01/app/oracle/product/10.2.0/db_1/jlib/share.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/swingall-1_1_1.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvmhas.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvm.jar:/
    u01/app/oracle/product/10.2.0/db_1/network/tools:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt9.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt10.jar:/
    u01/app/oracle/product/10.2.0/db_1/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/10.2.0/db_1/lib/xmlparserv2.jar oracle.net.ca.NetCA /orahome /u01/app/oracle/product/10.2.0/db_1 /orahnam OraDb10g_home1 /instype typical /inscomp client,
    oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /
    u01/app/oracle/product/10.2.0/db_1/network/install/netca_typ.rsp
    Configuration assistant "Oracle Net Configuration Assistant" was canceled.
    The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
    This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.

    865231 wrote:
    I am installing oracle 10g on Redhat 64bit (VM ware). In the middle it gives some error oracle Net services cancelled. Please see the error message below and advise.
    Configuration assistant "Oracle Net Configuration Assistant" was canceled.
    The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
    This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
    Output generated from configuration assistant "Oracle Net Configuration Assistant":
    Command = /u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java -Duser.dir=/u01/app/oracle/product/10.2.0/db_1/network/jlib -classpath /u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/i18n.jar:/u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/rt.jar:/
    u01/app/oracle/product/10.2.0/db_1/jlib/ewt3.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ewtcompat-3_3_15.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/netcfg.jar:/u01/app/oracle/product/10.2.0/db_1/network/jlib/netcam.jar:/
    u01/app/oracle/product/10.2.0/db_1/network/jlib/netca.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/help4.jar:/
    u01/app/oracle/product/10.2.0/db_1/jlib/jewt4.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/oracle_ice.jar:/
    u01/app/oracle/product/10.2.0/db_1/jlib/share.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/swingall-1_1_1.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvmhas.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvm.jar:/
    u01/app/oracle/product/10.2.0/db_1/network/tools:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt9.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt10.jar:/
    u01/app/oracle/product/10.2.0/db_1/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/10.2.0/db_1/lib/xmlparserv2.jar oracle.net.ca.NetCA /orahome /u01/app/oracle/product/10.2.0/db_1 /orahnam OraDb10g_home1 /instype typical /inscomp client,
    oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /
    u01/app/oracle/product/10.2.0/db_1/network/install/netca_typ.rsp
    Configuration assistant "Oracle Net Configuration Assistant" was canceled.
    The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
    This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.I thought the error message gave the advice already:
    The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
    This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.Looks like you canceled the pop up to configure your tns files. No harm, your database created just fine, but probably didn't configure listener.ora, sqlnet.ora, and tnsnames.ora. Just run netca and finish the tns confiiguration.

  • Error while installing oracle 10g in redhat Server

    Hi experts,
    I installed Oracle 10g in RedHat Linux server. After the installation Oracle will work smoothly. After restarting the server we try to start the listener service manually but it is not starting. I configured listener.ora file using GUI interface and also set Oracle HOME and Oracle SID. But still it’s not starting.
    when Try to start the listener the following error comes.
    Tns-12537:TNS:Connection closed
    Tns-12560:TNS:PROTOCOL ADAPTER ERROR
    Tns-00507:TNS:Connection closed
    Linux error 29:illegal Seek.
    Please help me

    Thanks for the answer it was helpful and i successfully started the oracle database.
    and i am trying to import dump file to tha database by creating the new schema when i try this i used the command like
    imp userid=username/[email protected] file=C:\filename.dmp fromuser=username touser=username but i got error as no such command.pls help

Maybe you are looking for

  • Array of variable-length lists in Action Engine

    I'm starting work on a application that consists of multiple sub-panels which each present a specific subset of the hardware functionality.  The hardware appears to the host mostly as memory-mapped registers.  I'm considering implementing the hardwar

  • Bug in Automator's Combine PDF Pages action?

    Hi guys, I've been playing around with 10.6's new Automator and Services. I decided to make an Automator Service so that if I have some PDFs selected in Finder, I can combine all the pages into one PDF and save it to a location. So I created the foll

  • How to add an image over another using af:image

    How to add an image over another using af:image Thanks, Veera

  • Inserting flv with alpha

    I am trying to insert a flv into a presentation. no problem there, except that the flv has an alpha channel that doesn't show up. I want to insert a video of a character (without a background attached) onto a presentation, but instead of that I get a

  • ICloud notes sub folders

    Prior to the IOS 7 update to iCloud I was able to see individual folders for my notes. Eg: All iCloud Notes Business Personal Kids The notes still display in their correct folders on the IOS7 devices and Mac, but Icloud appears to have removed the ab