Error While Installing the Business Content Query

Dear Friends,
We are in BI 7.0 and trying to install a business content query "Balance Sheets Profit and Loss Statement" but while activating we are getting the error that some Particular Request has not been found or not suitable. we checked for that request in SE09 and found that there is no such request existing in the system. So what could be the cause of the Error and what to do for successfully Installing the Query.
Thanks ..
Anurag

Are you assigning a new request or  creating a new one? Try to assign to a new request if you are not doing so.
Thanks
Wind

Similar Messages

  • Error while installing the Business Content 2lis_03_bf Transformation

    Hi,
    I have installed total 0ic_c03 cube and successful.
    Data is populating correct. When ever Releasing the Request error getting which Local objects not captured in request which are there in 2lis_03_bf info source, For this Error I have deleted the objects from info source and activated and activated transformation. But those object are there in the ROUTINES and disturbed. KEYFIGURES Routine are disappeared.
    Again when have installing the BF infosource and transformations from Business content is getting below error. for Ref below screen shot.
    Please advise me : urgent
    Thanks & Regards,
    Srinu.Rapolu

    Hi,
    it seems like issue with ABAP routine.
    Can you try to get detail error by doing syntax check.
    Also if you are in BW 7.31 - I notices while releasing it shows error. I will suggest ignore it and just released. it worked for me.
    You always have option to recapture the transport and resend the same objects, if earlier failed.
    Thank-You.
    Regards,
    VB

  • ERROR while activating the Business Content of Sales Cube 0SD_C03

    Hi,
    iam facing an error, iam getting the  error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB--  objects are not available in the D version. if u have any solution for this please share with use also.
    Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
    Thanks,
    Prabhakar.

    Hi Raj,
    I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
    In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
    While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
    ASSIGN_LENGTH_0 " "
    SAPLSNR3 or "LSNR3F01"
    LOCAL_BUFFER
    please treat this as urgent.
    Thanks
    Prabhakar.

  • Error while activating the Business Content

    Hi BI gurus,
    I am installing the business content for the sales overview infocube with the grouping option data flow before and install in back ground option. The back ground job is cancelled with the error msg"STDO: Log could not be written on output device T" and at the end it shows ABAP/4 processor: LOAD_PROGRAM_LOST error.
    Can any one give solution for this. This is very urgent,
    With Regards,
    Balachander.S

    And also check whether there are any dumps in ST22.
    Khaja

  • Errors while transporting the Business Content

    hi all,
    we are facing a few problems while transporting the Business Content from the Development systems to the Quality System.
    it says Method Execution - Action Cancelled.
    am pasting a part of the error messages also... kindly have a look at it and get back to us at the earliest as we are in the process of going-live...
       Start of the after-import method for object type R3TR IOBJ (Activation Mode)            
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       InfoObject 0ACN_CATGRY (in compound of characteristic 0ACN_EANUPC) not (act.) available 
       Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available           
       Attribute 0ACN_DEAL from characteristic 0ACN_EANUPC not (actively) available            
       Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available           
    Errors occurred during post-handling RS_AFTER_IMPORT for UPDR L                
    The errors affect the following components:                                    
        BW-WHM (Warehouse Management)                                               
    Ended with return code:  ===> 12 <===              
    please revert bact at the earliest....
    Thanks
    Manicks

    hi Manicks,
    check if oss note 903291 helps
    Transporting DataSources
    Transport problem ...Urgent
    Transport Issue
    Number range object missing NRIV and cant activate IOBJ during import
    try transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> execute. press button 'correct error' if any error exists.
    also try >> all combined tests >> master data >> check master data for characteristics.
    or run program RSDG_OBJNUMG_CREATE_INTERVAL
    have a try oss note 903291 ?
    Manual solution
    Get the name of the number range object from the error message shown above, for example, RS_OBJNUMG. Start Transaction SNRO. To display the intervals, use the number range function key and enter the name of the number range object as the object name. Change the intervals. The following from-numbers and to-numbers apply:
    - RS_OBJNUMG: 0000001 - 9999000
    - RSDDAGCUBE: 100000 - 199999
    - RSSBRAUTH: 00000001 - 99999999
    BW 3.0B
    Import Support Package 30 for 3.0B
    BW 3.10 Content
    Import Support Package 24
    BW 3.50
    Import Support Package 16
    BW 7.0
    Import Support Package 07

  • Error when installing the business content (update rules)

    Hi Gurus,
    I am trying to install the Business Content for Plant Maintenance. When trying to install the update rules UPDR BN10TVY8N84KARHU2FLSSYL56, I was able to see the update rules in the collected objects. But, when trying to install, it throws an error saying that the update rules is not found.
    Could you please help me in resolving the issue and install the update rules successfully.
    Thanks,
    Regards,
    -R

    You should install corresponding neccessary object with it, like update rule data target, and connected infosources also.
    infosource -> update rules -> data target
    Cross check you have infosoure, and data target installed or not, and if not install all these together.
    You can also use grouping option as install all neccesary options. It will collect all neccessary objects.

  • Error in Installing the Business Content for 2LIS_06_INV data source

    Hi Experts,
    We are trying to install the Business content for 2lis_06_inv. When we replicate the datasource, we are not seeing it in 3.x version. It is only vailable in 7 version. There is no transformation available in Business content for this data source. Please let me know how we need to proceed with this installation. Should we install the 7.0 flow or 3.x flow? Please provide th details if you have implemented th same in your system. Thanks is advance.
    Regards,
    Kavitha Jagannath

    Hi,
    Follow bellow steps:
    1. Goto RSA1.
    2. Select the BI content.
    3. Select the Grouping as' In Dataflow before and after'
    Then,you can get the data flow which are haveing the DS/TR/Data targets.
    4. Select the Install by setting the 'Install in background'.
    Regards.

  • Error while activating the business content object

    Hi guru,
    We have installed a new BI system, and hence we need to activate all the business content object as they are available in delivery version.
    So as there was an requirement i tryed to activate the business content object ,that is 0mat (MATNR) material number,
    but once done with the installation when i try to find the object and display it
    that is i select the object 0mat , context menu and say display or change it does not show the complete screen as it appears for a characterstic and gives a error
    "_settings for material number conversion not found"_*
    so please help me out what is the problem
    Thanks

    Thanks Subash Balakrishnan for replying,
    but let me inform you that i already did that as i need to install this object and now the object is showing with green instead of grey,
    Now my problem is that after selecting grouping and collection when i go to infoobject menu under modelling and find out the object 0mat, it shows in green , but as i need to observe the properties of this object like data type , length etc , i select the object 0mat and right click and select display,
    then instead of showing me the object properties screen it gives me the error as mentioned above,
    so as you say it has to be in active versoin , but i can not view the normal screen which appears after creating any object ,
    now i hope my problem is quiet explanatory so please help me.
    Thanks

  • Problem while installing SAP Business Content - Query

    Hi SAP BI experts,
    I am trying to install standard SAP BI contents, but getting following error while installing following queries.
    1. Warehouse Stock Analytics - Inventory Turnover - 0IC_C03_Q0024
    2. Inventory Turnover - 0IC_C03_Q0017
    I am getting the following error while simulating install: 
    1. Error when activating element 4WXUV5NRUZR0GYY1WYB22EUIA / Message no. R9118
    2. Object directory entry R3TR ELEM COAFSEIKGP51QJYSMX9FCEI9E does not exist / Message no. TK753 (for Calender Day)
    Please share your inputs.
    Thanks in advance!
    Regards,
    Bidyut

    Hi Bidyut ,
    Try to install the following objects with the option 'DataFlow Before and Afterwards ' under the grouping option .
    This will collect all the necesary objects that are required for its activation .
    After the necesary objects have been collected , tick mark the necessary objects then choose install .
    Regards,
    Lokesh

  • Error  when installing the Business content obj

    Hi All,
    when I am installing the BC cube and ODS the particular infoobject and related cube and queries are not installing, it is giving the below error.
    Object 0DBMKTC01 (InfoCube,CUBE) could not be collected for object 0DB (InfoArea,AREA)
    Object 0DB_MC01 (MultiProvider,MPRO) could not be collected for object 0DB (InfoArea,AREA)
    Object 0DB_MC02 (MultiProvider,MPRO) could not be collected for object 0DB (InfoArea,AREA)
    Object 0DB_VCDS1 (DataStore Object,ODSO) could not be collected for object 0DB (InfoArea,A
    Object 0DB_CHA01 (InfoObject Catalog,IOBC) could not be collected for object 0DB (InfoArea
    Object '0DB_KYF01' (IOBC) of type 'InfoObject Catalog' is not available in version 'D'
    In the long text it is showing the below message.
    this object 0DBMKTC01 of type InfoCube,CUBE is not available in the metadata repository.
    Can anyone tell me how to rectify this and install all the obj.
    I am using BI 7.0
    Thanks
    Sathya

    Hello,
    Download  Patch BI_Cont 703 Patch level 6.
    I hope it helps.
    Thanks,
    Kishore

  • While installing the BI Content i am getting some error??

    Questions:-
    1).while installing the BI Content i am getting some error plz tell me what is the process??

    Kishore,
    The answer would be simple - correct the error since the error ATM is known only to you...!!!
    Please be specific with your questions...
    http://www.google.com/search?hl=en&client=firefox-a&hs=So5&rls=org.mozilla%3Aen-US%3Aofficial&q=howtocorrecterrorinbusinesscontent+installation&aq=f&aqi=&aql=&oq=&gs_rfai=
    Edited by: Arun Varadarajan on May 6, 2010 1:15 AM

  • How to install the Business Content Cube 0PP_C02

    Hello,
      Can you please explain me how to install the Business Content Cube 0PP_C02 .
    What are the nesessary steps involved in this process. How this Standard Cube is available in
    AWB -> Modeling.
    What are the nesessary steps involved in the R/3 side.
    CAn you please help me in this.
    Thanks alot.
    Regards,
    Anitha

    Hi anitha
    TRy this
    To transfer and activate a DataSource delivered by SAP with Business Content, in transaction SBIW in the source system choose Business Information Warehouse à Business Content DataSources or Activating SAP Business Content àTransfer Business Content DataSources.
    The following figure displays the DataSources in an overview according to the application component.
           2.      Select the nodes in the application component hierarchy for which you want to transfer DataSources into the active version. Do so by positioning the cursor on the node and choosing Highlight Subtree.
    The DataSources lying under the subtree and other subtrees are selected.
           3.      To check for differences between the active and delivery versions of the DataSources, choose Select Delta.
    DataSources for which differences were found in the check (for example, due to changes to the extractor) are highlighted in yellow.
           4.      To analyze the differences between active and delivered versions of a particular DataSource, select the DataSource and choose Version Comparison. The application log contains further information regarding the version comparison.
           5.      To transfer a DataSource from the delivery version into the active version, select it in the overview tree using the button Highlight Subtree and choose Transfer DataSources.
    If an error occurs, the error log appears.
    Regardless of whether data has been successfully transferred into the active version, you can call the log by choosing Display Log.
           6.      To provide the active version of the DataSource in the connected BI systems and to enable data extraction and transfer, replicate the DataSource(s) with a metadata upload to the BI system.
    and in RSA1 in businuess content search ur required cube and select all the req fielsds in the next colums and select before and after is a must..in the selection field..
    this will solve ur issue..
    Prasanna

  • Error while installing the NerWeaver Platform

    Error While installing the NetWeaver Instance
    Posted: Nov 22, 2004 2:37 PM        Reply      E-mail this post 
    When I am installing 'SAP NetWeaver Suite'the below error came, can someone help me out on this below error?
    MOS-01011 'C:\usr\sap\BWI\SYS\exe\run/sapstartsrv.exe' returned with '-1'.
    The J2EE server is up unrunning @ the installing the Netweaver ABAP Instance I got this error.
    For the user BWI it has the Administrator previlages i checked so many time but I am unable to get it.
    Please help me out the error.

    Hi George,
    Kindly use the latest installation Masted in Service market place. That will possibly solve your problem.
    Regards
    Vivek

  • Error while installing the named instance SQL 2012 Sp1

    Hi,
    I am getting below error while installing the named instance with features Data base engine. on same server box 2 named instance already installed and working...please suggest. i have done a lot of troubleshooting..(configure local system for Db engines
    during installation, tried to install after another domain ID., repair and uninstalled existing and retried.) .. please s if i need to do anything else to resolve the issue.. installation account is domain admin account...
    Can i rename the installation domain account profile from sql server that used for 2 named instance and for 3 rd named instance i am trying... is any impact after profile rename from the local sql server on any instance already configured...
    Shailendra Dev

    thanks alberto.
    here is 
    2015-03-24 19:48:49.42 Server      Microsoft SQL Server 2012 (SP1) - 11.0.3000.0 (X64) 
    Oct 19 2012 13:38:57 
    Copyright (c) Microsoft Corporation
    Standard Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
    2015-03-24 19:48:49.42 Server      (c) Microsoft Corporation.
    2015-03-24 19:48:49.42 Server      All rights reserved.
    2015-03-24 19:48:49.42 Server      Server process ID is 3460.
    2015-03-24 19:48:49.42 Server      System Manufacturer: 'Xen', System Model: 'HVM domU'.
    2015-03-24 19:48:49.42 Server      Authentication mode is WINDOWS-ONLY.
    2015-03-24 19:48:49.42 Server      Logging SQL Server messages in file 'D:\Program Files\Microsoft SQL Server\MSSQL11.SCSMDB\MSSQL\Log\ERRORLOG'.
    2015-03-24 19:48:49.42 Server      The service account is 'AIRWORKS\scadmin'. This is an informational message; no user action is required.
    2015-03-24 19:48:49.42 Server      Registry startup parameters: 
    -d D:\Program Files\Microsoft SQL Server\MSSQL11.SCSMDB\MSSQL\DATA\master.mdf
    -e D:\Program Files\Microsoft SQL Server\MSSQL11.SCSMDB\MSSQL\Log\ERRORLOG
    -l D:\Program Files\Microsoft SQL Server\MSSQL11.SCSMDB\MSSQL\DATA\mastlog.ldf
    2015-03-24 19:48:49.42 Server      Command Line Startup Parameters:
    -s "SCSMDB"
    -m "SqlSetup"
    -T 4022
    -T 4010
    -T 1905
    -T 3701
    -T 8015
    2015-03-24 19:48:49.69 Server      SQL Server detected 1 sockets with 1 cores per socket and 2 logical processors per socket, 2 total logical processors; using 2 logical processors based on SQL Server licensing. This is an informational message;
    no user action is required.
    2015-03-24 19:48:49.69 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
    2015-03-24 19:48:49.69 Server      Detected 15624 MB of RAM. This is an informational message; no user action is required.
    2015-03-24 19:48:49.69 Server      Using conventional memory in the memory manager.
    2015-03-24 19:48:49.98 Server      Perfmon counters for resource governor pools and groups failed to initialize and are disabled.
    2015-03-24 19:48:50.01 Server      This instance of SQL Server last reported using a process ID of 5124 at 3/24/2015 7:48:48 PM (local) 3/24/2015 2:18:48 PM (UTC). This is an informational message only; no user action is required.
    2015-03-24 19:48:50.03 Server      Node configuration: node 0: CPU mask: 0x0000000000000003:0 Active CPU mask: 0x0000000000000003:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
    only. No user action is required.
    2015-03-24 19:48:50.07 Server      Using dynamic lock allocation.  Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node.  This is an informational message only.  No user action is required.
    2015-03-24 19:48:50.30 Server      Database Mirroring Transport is disabled in the endpoint configuration.
    2015-03-24 19:48:50.58 spid5s      Warning ******************
    2015-03-24 19:48:50.65 spid5s      SQL Server started in single-user mode. This an informational message only. No user action is required.
    2015-03-24 19:48:50.66 spid5s      Starting up database 'master'.
    2015-03-24 19:48:50.90 spid5s      9 transactions rolled forward in database 'master' (1:0). This is an informational message only. No user action is required.
    2015-03-24 19:48:51.04 Server      CLR version v4.0.30319 loaded.
    2015-03-24 19:48:51.17 spid5s      0 transactions rolled back in database 'master' (1:0). This is an informational message only. No user action is required.
    2015-03-24 19:48:51.17 spid5s      Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
    2015-03-24 19:48:51.39 Server      Software Usage Metrics is enabled.
    2015-03-24 19:48:51.81 spid5s      SQL Server Audit is starting the audits. This is an informational message. No user action is required.
    2015-03-24 19:48:51.83 Server      Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
    2015-03-24 19:48:51.86 spid5s      SQL Server Audit has started the audits. This is an informational message. No user action is required.
    2015-03-24 19:48:52.02 spid5s      SQL Trace ID 1 was started by login "sa".
    2015-03-24 19:48:52.16 spid5s      Server name is 'AWISCDB\SCSMDB'. This is an informational message only. No user action is required.
    2015-03-24 19:48:52.35 spid12s     The certificate [Cert Hash(sha1) "151C8B90A9A8AF12F5EFAE3439F691E2C01A7355"] was successfully loaded for encryption.
    2015-03-24 19:48:52.35 spid12s     Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\SCSMDB ].
    2015-03-24 19:48:52.40 spid12s     Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the trace flag 7806.
    This is an informational message only. No user action is required.
    2015-03-24 19:48:52.43 Server      The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Windows return code: 0x490, state: 16. Failure to register a SPN might cause integrated
    authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually registered.
    2015-03-24 19:48:52.45 Server      SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not be possible until a SPN is registered for the SQL Server service. This is an informational
    message. No user action is required.
    2015-03-24 19:48:54.03 Server      The SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [ MSSQLSvc/AWISCDB.AIRWORKS.IN:SCSMDB ] for the SQL Server service. 
    2015-03-24 19:48:54.03 spid14s     A new instance of the full-text filter daemon host process has been successfully started.
    2015-03-24 19:48:54.86 spid6s      Starting up database 'mssqlsystemresource'.
    2015-03-24 19:48:54.86 spid5s      Starting up database 'msdb'.
    2015-03-24 19:48:54.87 spid6s      The resource database build version is 11.00.3000. This is an informational message only. No user action is required.
    2015-03-24 19:48:55.21 spid5s      12 transactions rolled forward in database 'msdb' (4:0). This is an informational message only. No user action is required.
    2015-03-24 19:48:55.32 spid5s      0 transactions rolled back in database 'msdb' (4:0). This is an informational message only. No user action is required.
    2015-03-24 19:48:55.32 spid6s      Starting up database 'model'.
    2015-03-24 19:48:55.32 spid5s      Recovery is writing a checkpoint in database 'msdb' (4). This is an informational message only. No user action is required.
    2015-03-24 19:48:55.72 spid6s      Clearing tempdb database.
    2015-03-24 19:48:57.22 spid6s      Starting up database 'tempdb'.
    2015-03-24 19:48:59.04 spid5s      Database 'master' is upgrading script 'msdb110_upgrade.sql' from level 184551476 to level 184552376.
    2015-03-24 19:48:59.04 spid5s      ----------------------------------
    2015-03-24 19:48:59.04 spid5s      Starting execution of PRE_MSDB.SQL
    2015-03-24 19:48:59.04 spid5s      ----------------------------------
    2015-03-24 19:49:00.23 spid5s      Setting database option COMPATIBILITY_LEVEL to 100 for database 'msdb'.
    2015-03-24 19:49:00.57 spid5s      -----------------------------------------
    2015-03-24 19:49:00.57 spid5s      Starting execution of PRE_SQLAGENT100.SQL
    2015-03-24 19:49:00.57 spid5s      -----------------------------------------
    2015-03-24 19:49:00.61 spid5s      Setting database option COMPATIBILITY_LEVEL to 110 for database 'msdb'.
    2015-03-24 19:49:00.73 spid5s      Configuration option 'allow updates' changed from 1 to 1. Run the RECONFIGURE statement to install.
    2015-03-24 19:49:00.73 spid5s      Configuration option 'allow updates' changed from 1 to 1. Run the RECONFIGURE statement to install.
    2015-03-24 19:49:01.78 spid5s      Attempting to load library 'xpstar.dll' into memory. This is an informational message only. No user action is required.
    2015-03-24 19:49:01.79 spid5s      Using 'xpstar.dll' version '2011.110.3000' to execute extended stored procedure 'xp_instance_regread'. This is an informational message only; no user action is required.
    2015-03-24 19:49:01.80 spid5s      DBCC TRACEOFF 1717, server process ID (SPID) 5. This is an informational message only; no user action is required.
    2015-03-24 19:49:01.80 spid5s      DBCC execution completed. If DBCC printed error messages, contact your system administrator.
    2015-03-24 19:49:01.81 spid5s       
    2015-03-24 19:49:01.81 spid5s      Creating table temp_sysjobschedules
    2015-03-24 19:49:01.91 spid5s       
    2015-03-24 19:49:01.91 spid5s      Alter table sysdownloadlist...
    2015-03-24 19:49:01.92 spid5s       
    2015-03-24 19:49:01.92 spid5s      Alter table sysjobhistory...
    2015-03-24 19:49:01.92 spid5s       
    2015-03-24 19:49:01.92 spid5s      Alter table systargetservers...
    2015-03-24 19:49:01.92 spid5s       
    2015-03-24 19:49:01.92 spid5s      Alter table sysjobsteps...
    2015-03-24 19:49:01.99 spid5s      Configuration option 'allow updates' changed from 1 to 0. Run the RECONFIGURE statement to install.
    2015-03-24 19:49:01.99 spid5s      Configuration option 'allow updates' changed from 1 to 0. Run the RECONFIGURE statement to install.
    2015-03-24 19:49:01.99 spid5s       
    2015-03-24 19:49:01.99 spid5s      -----------------------------------------
    2015-03-24 19:49:01.99 spid5s      Execution of PRE_SQLAGENT100.SQL complete
    2015-03-24 19:49:01.99 spid5s      -----------------------------------------
    2015-03-24 19:49:02.01 spid5s      DMF pre-upgrade steps...
    2015-03-24 19:49:02.13 spid5s      DC pre-upgrade steps...
    2015-03-24 19:49:02.13 spid5s      Check if Data collector config table exists...
    2015-03-24 19:49:02.13 spid5s      Data Collector state before upgrade: 0
    2015-03-24 19:49:02.13 spid5s      pre_dc100::Check if syscollector_collection_sets_internal table exists...
    2015-03-24 19:49:02.13 spid5s      pre_dc100::Capturing Collection set status in temp table...
    2015-03-24 19:49:02.19 spid5s      Deleting cached auto-generated T-SQL Data Collection packages from msdb...
    2015-03-24 19:49:02.19 spid5s      End of DC pre-upgrade steps.
    2015-03-24 19:49:02.19 spid5s      DAC pre-upgrade steps...
    2015-03-24 19:49:02.19 spid5s      Starting DAC pre-upgrade steps ...
    2015-03-24 19:49:02.19 spid5s      End of DAC pre-upgrade steps.
    2015-03-24 19:49:02.19 spid5s      ----------------------------------
    2015-03-24 19:49:02.19 spid5s      Starting execution of MSDB.SQL
    2015-03-24 19:49:02.19 spid5s      ----------------------------------
    2015-03-24 19:49:02.23 spid5s      Configuration option 'allow updates' changed from 0 to 1. Run the RECONFIGURE statement to install.
    2015-03-24 19:49:02.23 spid5s      Configuration option 'allow updates' changed from 0 to 1. Run the RECONFIGURE statement to install.
    2015-03-24 19:49:02.27 spid5s      Checking the size of MSDB...
    2015-03-24 19:49:02.53 spid5s       
    2015-03-24 19:49:02.53 spid5s      Setting database option TRUSTWORTHY to ON for database 'msdb'.
    2015-03-24 19:49:02.53 spid5s      Setting database option RECOVERY to SIMPLE for database 'msdb'.
    2015-03-24 19:49:02.64 spid5s      ----------------------------------
    2015-03-24 19:49:02.64 spid5s      Finished execution of MSDB.SQL
    2015-03-24 19:49:02.64 spid5s      ----------------------------------
    2015-03-24 19:49:02.64 spid5s      -----------------------------------------
    2015-03-24 19:49:02.64 spid5s      Starting execution of MSDB_VERSIONING.SQL
    2015-03-24 19:49:02.64 spid5s      -----------------------------------------
    2015-03-24 19:49:02.64 spid5s      -----------------------------------------
    2015-03-24 19:49:02.64 spid5s      Finished execution of MSDB_VERSIONING.SQL
    2015-03-24 19:49:02.64 spid5s      -----------------------------------------
    2015-03-24 19:49:02.64 spid5s      Dropping view MSdatatype_mappings...
    2015-03-24 19:49:02.65 spid5s      Dropping view sysdatatypemappings...
    2015-03-24 19:49:02.65 spid5s      Dropping table MSdbms_datatype_mapping...
    2015-03-24 19:49:02.66 spid5s      Dropping table MSdbms_map...
    2015-03-24 19:49:02.67 spid5s      Dropping table MSdbms_datatype...
    2015-03-24 19:49:02.67 spid5s      Dropping table MSdbms...
    2015-03-24 19:49:02.73 spid5s      Creating table MSdbms
    2015-03-24 19:49:02.75 spid5s      Creating table MSdbms_datatype
    2015-03-24 19:49:03.01 spid5s      Creating table MSdbms_map
    2015-03-24 19:49:03.02 spid5s      Creating table MSdbms_datatype_mapping
    2015-03-24 19:49:03.03 spid5s      Definining default datatype mappings
    2015-03-24 19:49:03.04 spid5s      Creating datatype mappings for MSSQLSERVER to ORACLE8
    2015-03-24 19:49:03.21 spid5s      Creating datatype mappings for MSSQLSERVER to ORACLE9
    2015-03-24 19:49:03.29 spid5s      Creating datatype mappings for MSSQLSERVER to ORACLE10
    2015-03-24 19:49:03.37 spid5s      Creating datatype mappings for MSSQLSERVER to ORACLE11
    2015-03-24 19:49:03.46 spid5s      Creating datatype mappings for MSSQLSERVER to DB2
    2015-03-24 19:49:03.54 spid5s      Creating datatype mappings for MSSQLSERVER to SYBASE
    2015-03-24 19:49:03.62 spid5s      Creating datatype mappings for ORACLE8 to MSSQLSERVER
    2015-03-24 19:49:03.71 spid5s      Creating datatype mappings for ORACLE9 to MSSQLSERVER
    2015-03-24 19:49:03.83 spid5s      Creating datatype mappings for ORACLE10 to MSSQLServer
    2015-03-24 19:49:03.95 spid5s      Creating datatype mappings for ORACLE11 to MSSQLServer
    2015-03-24 19:49:04.08 spid5s      Creating view MSdatatype_mappings
    2015-03-24 19:49:04.08 spid5s      Creating view sysdatatypemappings
    2015-03-24 19:49:05.08 spid5s       
    2015-03-24 19:49:05.08 spid5s      Creating table syssubsystems...
    2015-03-24 19:49:05.09 spid5s       
    2015-03-24 19:49:05.09 spid5s      Creating view sysproxyloginsubsystem_view...
    2015-03-24 19:49:05.11 spid5s       
    2015-03-24 19:49:05.11 spid5s      Creating trigger trig_sysoriginatingservers_delete...
    2015-03-24 19:49:05.11 spid5s       
    2015-03-24 19:49:05.11 spid5s      Creating view sysoriginatingservers_view...
    2015-03-24 19:49:05.12 spid5s       
    2015-03-24 19:49:05.12 spid5s      Creating trigger trig_sysjobs_insert_update...
    2015-03-24 19:49:05.13 spid5s       
    2015-03-24 19:49:05.13 spid5s      Creating view sysjobs_view...
    2015-03-24 19:49:05.15 spid5s       
    2015-03-24 19:49:05.15 spid5s      Creating trigger trig_sysschedules_insert_update...
    2015-03-24 19:49:05.16 spid5s       
    2015-03-24 19:49:05.16 spid5s      Creating view sysschedules_localserver_view...
    2015-03-24 19:49:05.21 spid5s       
    2015-03-24 19:49:05.21 spid5s      Creating view systargetservers_view...
    2015-03-24 19:49:05.23 spid5s       
    2015-03-24 19:49:05.23 spid5s      Creating view sysalerts_performance_counters_view...
    2015-03-24 19:49:05.25 spid5s       
    2015-03-24 19:49:05.25 spid5s      Creating function SQLAGENT_SUSER_SNAME ...
    2015-03-24 19:49:05.25 spid5s       
    2015-03-24 19:49:05.25 spid5s      Creating function SQLAGENT_SUSER_SID ...
    2015-03-24 19:49:05.26 spid5s       
    2015-03-24 19:49:05.26 spid5s      Creating procedure SP_SQLAGENT_IS_SRVROLEMEMBER...
    2015-03-24 19:49:05.27 spid5s       
    2015-03-24 19:49:05.27 spid5s      Creating procedure sp_verify_category_identifiers...
    2015-03-24 19:49:05.27 spid5s       
    2015-03-24 19:49:05.27 spid5s      Creating function agent_datetime...
    2015-03-24 19:49:05.27 spid5s       
    2015-03-24 19:49:05.27 spid5s      Creating procedure sp_verify_proxy_identifiers...
    2015-03-24 19:49:05.28 spid5s       
    2015-03-24 19:49:05.28 spid5s      Creating procedure sp_verify_credential_identifiers...
    2015-03-24 19:49:05.29 spid5s       
    2015-03-24 19:49:05.29 spid5s      Creating procedure sp_verify_subsystems...
    2015-03-24 19:49:05.30 spid5s       
    2015-03-24 19:49:05.30 spid5s      Creating procedure sp_verify_subsystem_identifiers...
    2015-03-24 19:49:05.30 spid5s       
    2015-03-24 19:49:05.30 spid5s      Creating procedure sp_verify_login_identifiers...
    2015-03-24 19:49:05.31 spid5s       
    2015-03-24 19:49:05.31 spid5s      Creating procedure sp_verify_proxy...
    2015-03-24 19:49:05.31 spid5s       
    2015-03-24 19:49:05.31 spid5s      Creating procedure sp_add_proxy...
    2015-03-24 19:49:05.32 spid5s       
    2015-03-24 19:49:05.32 spid5s      Creating procedure sp_delete_proxy...
    2015-03-24 19:49:05.32 spid5s       
    2015-03-24 19:49:05.32 spid5s      Creating procedure sp_update_proxy...
    2015-03-24 19:49:05.33 spid5s       
    2015-03-24 19:49:05.33 spid5s      Creating procedure sp_sqlagent_is_member...
    2015-03-24 19:49:05.33 spid5s       
    2015-03-24 19:49:05.33 spid5s      Creating procedure sp_verify_proxy_permissions...
    2015-03-24 19:49:05.34 spid5s       
    2015-03-24 19:49:05.34 spid5s      Creating procedure sp_help_proxy...
    2015-03-24 19:49:05.35 spid5s       
    2015-03-24 19:49:05.35 spid5s      Creating procedure sp_get_proxy_properties...
    2015-03-24 19:49:05.36 spid5s       
    2015-03-24 19:49:05.36 spid5s      Creating procedure sp_grant_proxy_to_subsystem...
    2015-03-24 19:49:05.36 spid5s       
    2015-03-24 19:49:05.36 spid5s      Creating procedure sp_grant_login_to_proxy...
    2015-03-24 19:49:05.37 spid5s       
    2015-03-24 19:49:05.37 spid5s      Creating procedure sp_revoke_login_from_proxy...
    2015-03-24 19:49:05.37 spid5s       
    2015-03-24 19:49:05.37 spid5s      Creating procedure sp_revoke_proxy_from_subsystem...
    2015-03-24 19:49:05.38 spid5s       
    2015-03-24 19:49:05.38 spid5s      Creating procedure sp_enum_proxy_for_subsystem...
    2015-03-24 19:49:05.38 spid5s       
    2015-03-24 19:49:05.38 spid5s      Creating procedure sp_enum_login_for_proxy...
    2015-03-24 19:49:05.39 spid5s       
    2015-03-24 19:49:05.39 spid5s      Creating procedure sp_reassign_proxy...
    2015-03-24 19:49:05.40 spid5s       
    2015-03-24 19:49:05.40 spid5s      Creating procedure sp_sqlagent_get_startup_info...
    2015-03-24 19:49:05.41 spid5s       
    2015-03-24 19:49:05.41 spid5s      Creating procedure sp_sqlagent_update_agent_xps...
    2015-03-24 19:49:05.42 spid5s       
    2015-03-24 19:49:05.42 spid5s      Creating procedure sp_sqlagent_has_server_access...
    2015-03-24 19:49:05.45 spid5s       
    2015-03-24 19:49:05.45 spid5s      Creating procedure sp_sqlagent_get_perf_counters...
    2015-03-24 19:49:05.46 spid5s       
    2015-03-24 19:49:05.46 spid5s      Creating procedure sp_sqlagent_notify...
    2015-03-24 19:49:05.47 spid5s       
    2015-03-24 19:49:05.47 spid5s      Creating procedure sp_is_sqlagent_starting...
    2015-03-24 19:49:05.47 spid5s       
    2015-03-24 19:49:05.47 spid5s      Creating procedure sp_verify_job_identifiers...
    2015-03-24 19:49:05.48 spid5s       
    2015-03-24 19:49:05.48 spid5s      Creating procedure sp_verify_schedule_identifiers...
    2015-03-24 19:49:05.49 spid5s       
    2015-03-24 19:49:05.49 spid5s      Creating procedure sp_verify_jobproc_caller...
    2015-03-24 19:49:05.50 spid5s       
    2015-03-24 19:49:05.50 spid5s      Creating procedure sp_downloaded_row_limiter...
    2015-03-24 19:49:05.51 spid5s       
    2015-03-24 19:49:05.51 spid5s      Creating procedure sp_post_msx_operation...
    2015-03-24 19:49:05.54 spid5s       
    2015-03-24 19:49:05.54 spid5s      Creating procedure sp_verify_performance_condition...
    2015-03-24 19:49:05.58 spid5s       
    2015-03-24 19:49:05.58 spid5s      Creating procedure sp_verify_job_date...
    2015-03-24 19:49:05.59 spid5s       
    2015-03-24 19:49:05.59 spid5s      Creating procedure sp_verify_job_time...
    2015-03-24 19:49:05.61 spid5s       
    2015-03-24 19:49:05.61 spid5s      Creating procedure sp_verify_alert...
    2015-03-24 19:49:05.62 spid5s       
    2015-03-24 19:49:05.62 spid5s      Creating procedure sp_update_alert...
    2015-03-24 19:49:05.63 spid5s       
    2015-03-24 19:49:05.63 spid5s      Creating procedure sp_delete_job_references...
    2015-03-24 19:49:05.65 spid5s       
    2015-03-24 19:49:05.65 spid5s      Creating procedure sp_delete_all_msx_jobs...
    2015-03-24 19:49:05.66 spid5s       
    2015-03-24 19:49:05.66 spid5s      Creating procedure sp_generate_target_server_job_assignment_sql...
    2015-03-24 19:49:05.66 spid5s       
    2015-03-24 19:49:05.66 spid5s      Creating procedure sp_generate_server_description...
    2015-03-24 19:49:05.67 spid5s       
    2015-03-24 19:49:05.67 spid5s      Creating procedure sp_msx_set_account...
    2015-03-24 19:49:05.68 spid5s       
    2015-03-24 19:49:05.68 spid5s      Creating procedure sp_msx_get_account...
    2015-03-24 19:49:05.69 spid5s       
    2015-03-24 19:49:05.69 spid5s      Creating procedure sp_delete_operator...
    2015-03-24 19:49:05.70 spid5s       
    2015-03-24 19:49:05.70 spid5s      Creating procedure sp_msx_defect...
    2015-03-24 19:49:05.71 spid5s       
    2015-03-24 19:49:05.71 spid5s      Creating procedure sp_msx_enlist...
    2015-03-24 19:49:05.72 spid5s       
    2015-03-24 19:49:05.72 spid5s      Creating procedure sp_delete_targetserver...
    2015-03-24 19:49:05.73 spid5s       
    2015-03-24 19:49:05.73 spid5s      Creating procedure sp_enlist_tsx
    2015-03-24 19:49:05.74 spid5s       
    2015-03-24 19:49:05.74 spid5s      Creating procedure sp_get_sqlagent_properties...
    2015-03-24 19:49:05.76 spid5s       
    2015-03-24 19:49:05.76 spid5s      Create procedure sp_set_sqlagent_properties...
    2015-03-24 19:49:05.76 spid5s       
    2015-03-24 19:49:05.76 spid5s      Creating procedure sp_add_targetservergroup...
    2015-03-24 19:49:05.77 spid5s       
    2015-03-24 19:49:05.77 spid5s      Creating procedure sp_update_targetservergroup...
    2015-03-24 19:49:05.78 spid5s       
    2015-03-24 19:49:05.78 spid5s      Creating procedure sp_delete_targetservergroup...
    2015-03-24 19:49:05.78 spid5s       
    2015-03-24 19:49:05.78 spid5s      Creating procedure sp_help_targetservergroup...
    2015-03-24 19:49:05.79 spid5s       
    2015-03-24 19:49:05.79 spid5s      Creating procedure sp_add_targetsvgrp_member...
    2015-03-24 19:49:05.80 spid5s       
    2015-03-24 19:49:05.80 spid5s      Creating procedure sp_delete_targetsvrgrp_member...
    2015-03-24 19:49:05.81 spid5s       
    2015-03-24 19:49:05.81 spid5s      Creating procedure sp_verify_category...
    2015-03-24 19:49:05.81 spid5s       
    2015-03-24 19:49:05.81 spid5s      Creating procedure sp_add_category...
    2015-03-24 19:49:05.82 spid5s       
    2015-03-24 19:49:05.82 spid5s      Creating procedure sp_update_category...
    2015-03-24 19:49:05.83 spid5s       
    2015-03-24 19:49:05.83 spid5s      Creating procedure sp_delete_category...
    2015-03-24 19:49:05.83 spid5s       
    2015-03-24 19:49:05.84 spid5s      Creating procedure sp_help_category...
    2015-03-24 19:49:05.84 spid5s       
    2015-03-24 19:49:05.84 spid5s      Creating procedure sp_help_targetserver...
    2015-03-24 19:49:05.85 spid5s       
    2015-03-24 19:49:05.85 spid5s      Creating procedure sp_resync_targetserver...
    2015-03-24 19:49:06.06 spid5s       
    2015-03-24 19:49:06.06 spid5s      Creating procedure sp_purge_jobhistory...
    2015-03-24 19:49:06.09 spid5s       
    2015-03-24 19:49:06.09 spid5s      Creating procedure sp_help_jobhistory...
    2015-03-24 19:49:06.10 spid5s       
    2015-03-24 19:49:06.10 spid5s      Creating procedure sp_add_jobserver...
    2015-03-24 19:49:06.11 spid5s       
    2015-03-24 19:49:06.11 spid5s      Creating procedure sp_delete_jobserver...
    2015-03-24 19:49:06.11 spid5s      Error: 10011, Severity: 16, State: 1.
    2015-03-24 19:49:06.11 spid5s      Access denied.
    2015-03-24 19:49:06.11 spid5s      Error: 917, Severity: 15, State: 1.
    2015-03-24 19:49:06.11 spid5s      An upgrade script batch failed to execute for database 'master' due to compilation error. Check the previous error message  for the line which caused compilation to fail.
    2015-03-24 19:49:06.11 spid5s      Error: 912, Severity: 21, State: 2.
    2015-03-24 19:49:06.11 spid5s      Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 917, state 1, severity 15. This is a serious error condition which might interfere with regular
    operation and the database will be taken offline. If the error happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective
    actions and re-start the database so that the script upgrade steps run to completion.
    2015-03-24 19:49:06.11 spid5s      Error: 3417, Severity: 21, State: 3.
    2015-03-24 19:49:06.11 spid5s      Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup, repair it, or rebuild it. For more information about how to rebuild the master database, see SQL Server Books
    Online.
    2015-03-24 19:49:06.12 spid5s      SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
    2015-03-24 19:49:06.50 spid12s     The SQL Server Network Interface library successfully deregistered the Service Principal Name (SPN) [ MSSQLSvc/AWISCDB.AIRWORKS.IN:SCSMDB ] for the SQL Server service. 
    Shailendra Dev

  • Error while installing the SAP J2EE add-on for SAP NW XI installation

    Error while installing the SAP J2EE add-on for SAP NW XI installation  
    Posted: Jan 24, 2007 5:23 PM         Reply      E-mail this post 
    Hello,
    When I am installing the SAP SAP J2EE add-on for SAP NW XI installation I am getting the follwing error:
    CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: Executable /oracle/XID/920_64/bin/sqlplus returns 127.. SOLUTION: See ora_sql_results.log and the Oracle documentation for details
    Could some one help me to resolve this error and install the SAP J2EE add-on?
    Thanks,
    George

    Hi George,
    Kindly use the latest installation Masted in Service market place. That will possibly solve your problem.
    Regards
    Vivek

Maybe you are looking for

  • JavaScript to Hide Region

    I would like to hide an entire region based upon JavaScript. I can't use the conditional display of a region because this is on-demand and can't submit the page to check value. I can hide specific values, but the labels remain and the region border r

  • Move files out of subfolder into main folder

    I have a bunch of files in subfolders : mainfolder A / subfolder 1 / file a mainfolder A / subfolder 1 / file b mainfolder A / subfolder 1 / file c mainfolder A / subfolder 2 / file d mainfolder A / subfolder 2 / file e mainfolder A / subfolder 2 / f

  • Is apple going to launch a new ipod classic??

    I want to buy a new ipod since mine is quite old, but I was wondering wether I should by the ipod Classic or wait so see if Apple is going to launch a new one any time soon... Does any one have any info on ti?? Thanks!

  • Financial Statement Version (FSV)

    Hi There is one requirement in Financial Statement Version (FSV) format as follows: Sales ---> A Operating Cost ---> B Operating Profit --> C = A-B Finance Cost --> D Profit --> E = C-D I wanted to know if calculating Operating Profit (C = A - B) and

  • Iphone 4S shut down by itself and will not turn on.

    I was using my phone in the car on Sunday and it was working perfectly fine, got home and placed it on the table. Went away for 10-15 mintues and I had come back to find it was off which I thought odd as the battery was almost fully charged. I attemp