Error while installing transfer rules for 0PM_C03 from Business content

Hi All,
When i try to install the transfer rules for the Infocube 0PM_C03 from the Business Content, i get the following error:
"Mapping between 2LIS_17_I3HDR 2LIS_17_ORDER is inconsistent".
Here 2LIS_17_ORDER is the Infosource, and 2LIS_17_I3HDR is the datasource.
Also, kindly let me know how can the Infosource and the datasource have different names, like in the case for this Cube.
Kindly help...

Hi,
The datasource and infosource can have different names no issue with that.
and while selecting transfer rule for installing find with '2LIS_17_I3HDR'.
Regards,
Rathy

Similar Messages

Error while Installing Oracle Services for Microsoft Transaction Server

I downloaded "Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP" and installed the personal edition. It did not install successfully and gave this error message:
Error while Installing Oracle Services for Microsoft Transaction Server
The specified key was not found while trying to GetValue
- stop installation of all products.
- stop installation of this component only.
The installation of Oracle 9i Database was unsuccessful
The Integration tools and client installed just fine from the same download. Why didn't the database install successfully? All the other components seemed to install just fine and the database appeared to be created - but I could not open it and there was not start menu option for DBA Studio.
I am running Windows 2000 professional with Service Pack 3 on a 2 GHz Pentium4 machine with 512MB Rambus RAM, 32bit color graphics ATI All-in-Wonder card, about 40GB of disk space, a local peer-to-peer network via cat5 cable to another Win2k P3 machine, and Creative Soundblaster Audigy card. Do I need to adjust any network settings? Would it help or hinder if I installed MS IIS? WinNT has a Microsoft Transaction Server (MTS) but Win2k has COM+ instead; does that make a difference in terms of the installer looking for MTS? Do I need to configure COM+ in some special way / change settings?

HI Salman,
I am doing the following.
1. I am installing Oracle 10.2.01 Database(Not Client) on my windows Xp laptop. While installation i Choose the custom option and Check the Oracle Windows Interface. In that i check the "Install Oracle Services for Microsoft Transaction server" checkbox. The installation goes on fine till 99% and when it tries to install the
Oracle Services for Microsoft Transaction server it gives an error saying that "Microsoft Transaction server" was not found on the system.
I had previously installed the same on my laptop and it was working fine. but after uninstallation when i try to re install i get this problem.
If i go to the services.msc option in windows i still see the OracleMTSRecoveryService option even when i have uninstalled oracle. But when i try to start the services i get the following error
Could Not start the OracleMTSRecoveryService on the local computer.
Error 3: The system cannot find the file specified.
Any help on how to resolve this issue will be highly appreciated

Error while installing printer software for HP Photosmart Plus 209a-m on Windows 8.1 64 bit OS

I am getting below error while installing printer software of HP Photosmart Plus 209a-m on Windows 8.1 64 bit OS. Can you please help me resolve this error? Thanks in advance.

Hi tarunkw,
Follow the steps below and check if that resolve the issue:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button.
Now try reinstalling the HP Software and check if the installation goes as expected.
If the issue persists continue following the next steps below:
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Run the installation file and check for any difference.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Error while creating transfer rules.

Hi
I am creating transfer rules and a error message says " IS_00_BB does not exist". (IS_00) is the desc. of the info source)
can someone help me on this????
I had created transfer rules for another cube in the same info area, but no error had come then..
Thanks.
Aswath.

Hello,
The problem you are reporting could be that you are using the Transfer
Method 'IDOC' for the affected transfer rule(s). You should use the
'PSA' transfer method (rather than the 'IDOC' method), as the IDOC
method is very old.
If so, please change the transfer method in the affected transfer rules
to 'PSA', then try to activate the transfer structure again. This should
solve the problem, in which case, please let us know by clicking on the
'Close' button.
If the problem persists please create the report that is relevant for your system release
as per the SAP note 493422 and execute the report in your system, the report can be
created in se38, please talk to your basis team if you have problems creating the report.
Best Regards,
Des

How to install sources for infobject from business content

Hi,
I have 16 infobjects for which we need to move to prod and there are no connections to it but the infobjects are active and some are i modified state, like no datasources, infosources, transfer rules etc., Can you please tell me the approach to install all the necessary for them. I mean how to find and how to install, please help if any documentation is available.
Thanks

Hi daniel,
Inorder to install the business object, you will be require to follow the following steps :
i)Go to RSA1 (Admistrator Workbench) for installing the Business Content. Navigate to object you want to install. Now you want to install the info object then select Info Object.
ii)Select your Info Object say 0MATL_GROUP (material Group).Click on Transfer selections.
iii)Now when the info object is selected. It will always be in default selection (Only Necessary object), Now if you want to install the various other things like data source, transformation rule etc as you specify in query
iv) For that go to grouping select IN DATAFLOW BEFORE AND AFTERWARDS. One more thing If you want to specify the Source system then u can do it by clicking on that Yellow Box (symbol specify the source system) adjacent to BEx (Truck Symbol). This mainly used for the things like transformation, update rule etc as you want.
v)Now you want to see if there can be some predictive error then go Install --> Simulate Installation.
vi)Now important point to note is MATCH(X) or COPY. Now suppose you already have the Material Group install in your system in Active version. Now here if you didnu2019t select the MATCH check box then your A-version Material Group will be overwritten by the D-version Material group provided by SAP.
vii)For ur more understanding lets take the example say you have added two customer specific attribute to Material Group now twist is SAP has also just release the enhance material Group with two additional attribute. Now you are very curious of getting this two attribute in your already active Material Group. For this you will be required to install the material Group from Business content. If you forget to check the Match option then your customer specific attribute will be lost. So to retain them we have to check the MATCH(X)
Hope it will help.
Thanks,
Deepak Machal

Missing Update Rules for 0IC_C03 in Business Content

We had a problem with 0IC_C03, so we decided to reload from Business Content and then migrate to 7.0 format again.
However, when we try to gather all of the dependent objects for the InfoCube in Business Content, we only get one set of obsolete update rules (2LIS_40_S278), and the update rules for 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM do not show up. They do not appear under update rules, either.
I know they were there at one point because I activated and migrated the cube once already.
Can someone help us find our lost update rules?

Hi Dan,
There are no update rules deliverd with BI 7.0 for 0IC_C03. There are only
transformations Delivered as part of the content. In the new release
Transformation replace the update rules and the transfer rules.
You have the 3 data sources and the associated transformations to
upload data to the infoCube.
Transformations installed
TRCS 2LIS_03_BF_TR -> CUBE 0IC_C03
TRCS 2LIS_03_BX_TR -> CUBE 0IC_C03
TRCS 2LIS_03_UM_TR -> CUBE 0IC_C03
DataSources installed
2LIS_03_BF
2LIS_03_UM
2LIS_03_BX

How to find the right primary key for DSO from Business Content

According to best practice design, it is reccomended to make a DSO where all fields from Business COntent Datasources are transferred.
But, how to find the right primary indeks ?
Any good suggestions ?
For many of the Business Content dataflows there are not DSOs present, so ther e is no tip to get from the dokumentations as gfar as I have found.
best Regards
Ingrid

Hi Ingrid,
Your question will be perfect in case if you are going for a Custom cube.
You will not have any problem when you create a Datasource in R/3 level even if it is been built on a single table or on view.
Only point that you want to know how to design my Key fields in ODS.
This will be purely depends at what level that you want to bring the data.
Egg:-
If you run the data source in RSA3 and check for Each GL if you have 10 liine items and you want all the 10 line items to be transfered to BW.
In this case you need to check what is the unique combination of fields that is making this lineitems to exists as 10.then include all those fields into Your ODS Key Fields.
This way you can have 10 records for that perticular GL in both sides, by which u will make sure that the data is been completely transfered.
If in case if you clude your own Key fields then you will get the correct Total in report for each GL but you can't see all those 10 line items.
For any case you need to figureout how many records that you want to take into BW based on that check the fields that makes it unique and then add them to ODS Keyfields that will solve your requirement.
I think this will clear your doubt.
Best Regards,
VNK.

Transport Error while moving Transfer rules - RS_ISMP_AFTER_IMPORT for object type(s) ISMP ( )

Hello Experts
Strucked up with an issue while transporting the Transfer rules that are created for an UPFILE source system.
Transport is included with list of Data source Replica, Transfer rules, Transfer structure and Info Package.
My data Source : ZVPRCRDT for an UPFILE
Below is my error screen :
Tried to resolve the error by moving the Data source Replica as an individual Transport.
Still see the same error and my data source is active in the current system.
Looking for a resolution to find out the root cause.
Any help is appreciated...

Thanks for your response Ram.
My Source System UPFILE is in active mode.
Unsure why system is throwing error as source system assignement was inconsistency.
All fields are mapped perfect with one-one relation.
Worked by reassigning the UPFILE - source system to the data source but still i m seeing the same error : Data Source doesnt exist in source system of version A.
Transported the DS alone to Quality initially where i m unable to find the transported data source in my quality(target). DO i need to perform replicate meta data ...something like that in quality so that imported data sources will get refreshed?
If so can you let me know the approach.
Thanks

Error while installing a patch for Mainwin 5.0.2 on Solaris 2.8

Hi,
I am relatively new in this field, so i apologise for any slip-ups.
We use a Solaris 2.8-SPARC server. I was given an external drive which contained the porting software Visual Mainwin 5.0.2 and was told to install it from the drive. On checking it, i found that the entire folder structure of the software was damaged, i.e. every file of the software was changed to uppercase. UNIX being highly case-sensitive, i manually changed each and every file present in the software directory to lowercase and then ran it.
The software ran fine, it got installed and the license server was also up. the licenses were also nicely distributed. everything was fine until i was asked to install the patch 'vmw502_sunos5_HF1.sh'. While installing i got the following output :
# sh vmw502_sunos5_HF*
Extracting installation package to "/tmp/mwspselfextr27624".
Please stand by ... Done.
=====================================================================
Visual MainWin Patch Installation
HF1 for VMW 5.0.2 <sunos5> 24-Jul-2003.14:01 Cycle115
=====================================================================
***Error: cannot find file
/export/home/tools/solaris/env/mainsoft/../mwver/mwversion.ini
Something wrong with your Visual MainWin installation - aborting
when i checked the installation directory, i found that the file 'mwversion.ini' was present inside the directory 'mwver'. I cant see any reason why the patch is not recognizing the file.
Can anybody help?? Any kind of help will really be appreciated.
-SD

Hope you already tried: ls -l /export/home/tools/solaris/env/mainsoft/../mwver/mwversion.ini If ls returns the file name, try running the script under truss to find some clues.
% truss -f -vall -rall -wall -o /tmp/mwpatch.log sh vmw502_sunos5_HF*

Error while activating transfer rules needs help.

The error while activating 0FI_AP_6 transfer rules is listed below.
''InfoObj. 0DEBITOR from fld KUNNR of dataSource 0FI_AR_6 is not active but BCT ex. -> Dtl'' how to resolve this issue and activate transfer rules?

Hi
The problem is with your data source replication.
Activate your data source & replication too.
Activate your transfer atructure through RS_TRANSTRU_ACTIVATE_ALL .
If not so, Activate your transfer rule manually.
Regadrs
Saravanan.ar

Runtime Error while creation of rule for IU elimination

Hi,
Following runtime error occuring while creating a rule under IU elimination method.
Error analysis
A RAISE statement in the program "CL_UC_SINGLESELCOND_FACTORY===CP" raised the
     exception
condition "NOT_FOUND".
Since the exception was not intercepted by a superior
    program, processing was terminated.
    Short description of exception condition:
   For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    function module from the display of active calls.
Trigger Location of Runtime Error
    Program                                 CL_UC_SINGLESELCOND_FACTORY===CP
    Include                                 CL_UC_SINGLESELCOND_FACTORY===CM001
    Row                                     33
    Module type                             (METHOD)
    Module Name                             IF_UC_CUST_FACTORY~GET_INSTANCE_BY_GUID
Please advice...
Edited by: VNK on Nov 25, 2008 11:18 AM

Hi,
please check SAP note 859500:
- implement all relevant notes
- send a message to SAP support for checking and solving the GUID inconsistencies.
best regards
Thomas

Help required- error while installing HANA Live for ERP deployment

Hello Mentors,
While installing HANA Live I am stuck with the below attached error. Also attached are the relevant logs.
I could see that many people faced the similar issue, but unfortunately none has posted the final solution.
I have tried to implement each and every step as mentioned in the below discussion forums-
http://scn.sap.com/thread/3415156
http://scn.sap.com/thread/3488174
I have already opened a ticket for SAP, but their turn around time has kept me waiting for long with no progress
Please give me some pointers....
Thanks,
Atul

Any suggestions plz...??
Thanks,
Atul

Error while activating transfer structure for 0MATERIAL_ATTR

I am trying to activate the transfer rules of 0MATERIAL_ATTR, but when activating the process end with the following message:
Error generating program
Message no. RSAR245
Diagnosis
An error occurred in the program generation:
Program / Template:   RSTMPL80
Error code / Action: 6
Row:        1,792
Message:    The data object "P_S_COMM" has no component called
I cannot activate the transfer rules of 0MATERIAL_ATTR and 0MATERIAL_TEXT because of the same problem. Could anyone please help me...
Thanks in advance for your valuable help.
Regards
Carlos España.

Ron Silberstein:
I really appreciate your help, thank you very much.
I saw your profile, and i saw that you are an expert in BI.
Congratulations, your help was very important for me.
CONTINUE HELPING OTHER PEOPLE!!!!! T H A N K S!!
God Bless you.
Regards
Carlos España.

Sapinst stops with error while installing ess component for Java AS

Dear experts,
I really hope you can help me with this one,
We are installing a ABAP/Java AS development system and sapinst has gone through 75% of all execution tasks nicely,
but then stopped with error while deploying components for the Java AS:
ERROR 2009-03-30 13:01:27
CJS-30156 SDM deployment failed for at least one of the components to deploy.<br> SOLUTION: Check 'C:\Program Files/sapinst_instdir/ERP/SYSTEM/ORA/DISTRIBUTED/AS/CI/callSdmViaSapinst.log' for more information.
ERROR 2009-03-30 13:01:28
FCO-00011 The step enableUsageTypes with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|15|0|enableUsageTypes was executed with status ERROR .
Any help would be really appreciated as I am stuck with this and dont seem to be able to find any information on this one.
Thanks a lot for your help in advance.
Here is the crucial part of callSdmViaSapinst.log:
Mar 30, 2009 12:55:18... Info: Starting: Initial deployment: Selected development component 'ess/bp_ess'/'sap.com'/'MAIN_ERP05VAL_C'/'788220'/'0' will be deployed.
Mar 30, 2009 12:55:18... Info: SDA to be deployed: D:\usr\sap\DE1\DVEBMGS00\SDM\root\origin\sap.com\ess\bp_ess\MAIN_ERP05VAL_C\0\788220\sap.com_ess~bp_ess.sda
Mar 30, 2009 12:55:18... Info: Software type of SDA: J2EE
*Mar 30, 2009 12:55:18... Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) ******
Mar 30, 2009 1:00:21 PM Info: Begin of log messages of the target system:
*09/03/30 12:55:19 - ************************************************************
09/03/30 12:58:07 - Start updating EAR file...
09/03/30 12:58:07 - start-up mode is lazy
09/03/30 12:58:08 - EAR file updated successfully for 578ms.
09/03/30 12:58:08 - Start deploying ...
09/03/30 12:58:42 - EAR file uploaded to server for 30641ms.
09/03/30 13:00:20 - ERROR: Not deployed. Deploy Service returned ERROR:
                     java.rmi.RemoteException: Cannot deploy application sap.com/ess~bp_ess..
                     Reason: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception during deploy: Failed to deploy archive D:\usr\sap\DE1\DVEBMGS00\j2ee\cluster\server0\.\temp\deploy\work\deploying\reader1238414327258\sap.comessbp_ess.epa
               The following objects could not be locked: [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess**.iviews/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.mx/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.iviews/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.de/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.iviews/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.id/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.jp/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.de/com.sap.pct.erp.es

Thanks Désirée for your answer and apologies for the late update on this one.
This issue is resolved now, the reason for the error was a lack of memory which probably triggered a timeout in sapinst. After upgrading the memory to 7GB and re-starting the ABAP+Java AS and resuming sapinst everything went through fine. However, this was hard to spot because the logs wouldn't tell you about the lack of memory but about everything else!
regards,
Manfred

Error while migrating transfer rules

Hi all,
When migrating <b>2LIS_02_SCL</b> transfer rules to transforamtions I got a shotdump "ASSERTION_FAILED in 'CL_RSTRAN_TEMPLATE->CREATE_ROUTINE" for this I have implemented Snote : 986199 after this when I am migrating transforamtions are getting created but showing syntax errors (for this transfer rules there are standard routines ) .Can anyone help me to sort out this issue.
Regards
KK

Hello,
unfortunately not all transfer rules can be migrated automatically.The migration of the business content transformation is done on customer project base. This means some of the adjustments needs to be done manually.
Please adjust the rules to the ABAP OO compliance.
This how to paper should help:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fc61e12d-0a01-0010-2883-e2fc63ef729b
and
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e73bfc19-0e01-0010-23bc-ef0ad53f2fab
I hope this helps.
Michael

Error while installing transfer rules for 0PM_C03 from Business content

Similar Messages

Maybe you are looking for