Error While Installing XL Reporter
Hai To all,
While i try to install XL Report version 30.. There is an error. I click
Administrator -> Addon -> Addon Administration
There i click the button Register Addon. I choose the desired ard file. Then i click ok the following error is showing..
*Application has a problem.
Diagnostic file c:\program files\SAP\SAP Business One\Log\SAP Business One_2008414152148.dmp was created.
Please contact support and attach the diagnostic file.*
Does anyone have idea about this...............
Regards,
Anitha
HI Anitha
please log a message for Business One Support describing the issue and attaching the
dump file.txt into it.
best regards
Rui Pereira
Similar Messages
-
Invalid Key code Error while installing crystal report server 11
While installing crystal report server 11,i am facing an erro which says Invalid Key code Error.I had raised this issue to SAP customer support and attaching the conversation that we had.PLEASE HELP me to resolve the issue.
MAILS--Dear Mohit,
Thanks for the patience.
We have received the below update from the Licensing Team.
You received your permanent key in respect of these licenses - the key is for Crystal Reports Server XI.
You did not purchase these licenses for Crystal Reports Server, but purchased it for Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer. The software included was version XIR2, but you elected to use version XI instead and received key .
You would need to enroll the licenses in maintenance if you want to upgrade them.
In case of any queries please create a ticket via the Service Market Place.
Regards,
Jessy
Customer Interaction Center
SAP Active Global Support
Hello Jessy,
The customer received their permanent key in respect of these licenses - the key is for Crystal Reports Server XI.
They did not purchase these licenses for Crystal Reports Server, they purchased Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer. The software included was version XIR2, but they elected to use version XI instead and they received key .
They cannot decide to upgrade now - they must enrol these licenses in maintenance if they want to upgrade them.
Kind regards,
Rosemary
From: BOSAPASIA
Sent: 29 September 2009 05:49
To: Savage, Rosemary
Subject: FW: Crystal Reports Server Installation Issue
Importance: High
HI Rose ,
Need your assistance on the below issue.
Customer purchased Crystal Report Server XI R2 in 2005. When he is trying to install it now, he is getting an Invalid Key code Error.
He has provided us the Scanned copies of the Key code and the registration number.Can you please help and check if he can be provided with a Keycode.
Regards,
Jessy
CIC Team Lead
Customer Interaction Center
Global Support Centre India
SAP Labs India Pvt Ltd
Hi,
Providing you with the required details to proceed further
Registration Number-
Registration Email Address-taxmantra.support
And also please find attached the scanned copy of the Registration key we got for the Crystal report server.
Dear Mohitk,
Thank you for your information.
I checked with the concerned colleague and received the below update:
Please check from where you got this key code. If from a paper, please scan it to us. Please let them track to the original paper or email.
If you have registered the key code, please provide us the registration number or registration email address so that we will try to check for you.
If you did not register before, as the promotion is over so the key code could not be replaced.
I request you to kindly check the same at your end and revert with the details.
Moreover, there are two ways for Crystal Report customer to get support.
One is customer with bundled product such like BOE and under maintenance. These customers will have an S-user ID and password to log a case in service market place via http://service.sap.com/message
A learning map was provided, listed on left column.
The other is customer with only Crystal report product, the support is via SDN.
http://service.sap.com =>Crystal Reports and Xcelsius Support=>Crystal Reports and Xcelsius Forums
Customers can first check whether other customer has got the same issue and find the reply from our engineers.
You may also post your own thread for support.
Anything else I could help, please do not hesitate to contact again.
Hi,
I am providing you with the details required to resolve the issue related to Crystal report installation,for reference of the issue please refer the mail below.
Please find attached the Scanned Document containing the details as per the details required by you.
Hope to see a quick resolution for the issue.
Dear Mohit,
Thank you for your e-mail.
As discussed, I understand that youu2019ve procured Crystal Reports Server 11 in 2006. However youu2019re facing issues with key codes while reinstalling the same. We request you to kindly provide us with below details for further assistance.
Your customer number:
Your customer name and address:
Purchase order number:
Any other products purchased along with Crystal Reports Server 11
Any S-User Id:
Any old case ID:
Please feel free to contact us if any further queries.
Hi,
I am raising this concern on behalf on Taxmantra project (Tata Consultancy Services noida).
We have bought licensed Crystal Reports Server 11 near by 2006.We are trying to install the crystal server but while installing ,we have encountered with an error message that:-
"The product key code you have entered is incorrect"
We are facing the same issue in 2006,I am attaching with this email the conversations that was held in 2006 to get the correct key code.
Please help us to resolve the issue as early as possible.
My contact number:
If you need any further information do let me knowAjit,
By design, the product is not able to be installed under the superuser account.
1. Create a new user and specify a home directory for the user without a quota set.
2. Copy or move the installation files to a directory that the new user can read. I suggest you move the installation files directly into the new user's home directory.
3. Logon as the new user (or su - newuser)
4. run the installation shell script using that new user's account.
NOTE: Ensure the system meets the requirements from the supported platforms documents.
.Tony -
Error 1305 while installing Crystal Reports 2008, JavaSDK
While installing Crystal Reports from the original media on a new Lenovo Thinkpad running Windows XP Pro SP3 I get the following error while installing:
Error 1305: Error reading from File: c:\program files\Business Objects\javasdk\jre\audio\soundbank.gm. Verify that the file exists and that you can access it.
I have the option to retry or cancel, obviously cancel exits the installer. Retry just fails again. I have tried to access the file (which does exist) and I cannot because it is in use. I used Sysinternals process explorer to find out what has the file in use and it is msiexec.exe which is the Microsoft Installer service which is running in order to install CR2008.
I have tried restarting, setting permissions on the file and folder, uninstalling and reinstalling Java VM from Sun. I even tried killing msiexec (which killed the install). I even tried taking out all reference to java in a custom install.
I am at a loss on what to do next. Any help would be appreciated.
-MichaelI found that if I installed it from a copied local directory instead of the CD Rom that it worked
-
Getting error while installing reporting servcies on existing sql server 2012.
Hi Expaerts,
sql 2012 sp1:
getting error while installing Reporting services on existing sql server. at final step
Error on scren: install_rsharepoint_cpu64_action : roll back , rolling back action.
error on popup windows: ' one or more files required to restore your computer to its previous state colud not be found. restoration will not be found.
Thanks in advance.Hello,
Please help to collect the useful log information while install SQL Server Reporting Services. Here is the article for your reference, please see:
Navigating the Setup Logs when you install SQL Server 2012 Reporting Services:
http://blogs.msdn.com/b/jtarquino/archive/2012/03/14/navigating-the-setup-logs-when-you-install-sql-server-2012-reporting-services.aspx
Regards,
Elvis Long
TechNet Community Support -
Error while opening a report in FRstudio client machine.
Hi,I'm getting below error while opening a report in FRstudio client machine. please help me if any of you resolved this issue earlier.
client laptop: 64bit windows7
hyperion version: 11.1.2.2
error msg:
"HARSnapin Initialize() Error -2147467259 - ; nested exception is:
java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.InvalidClassException: com.hyperion.reporting.graphics.GridObject; local class incompatible: stream classdesc serialVersionUID = 5432192847655595077, local class serialVersionUID = -5245705824007679661"
thanksI've seen umarshalling error when there is a difference between the client and server version. Is there a patch applied? I would recommend to uninstall the existing one and install if from Workspace. (this will ensure that you've the correct client version)
Regards
Celvin
http://www.orahyplabs.com -
SETUP ERROR WHILE INSTALLING SQL SERVER 2008 R2
Hi ,
I'm coming across the following error while installing Microsoft SQL Server 2008R2
SQL Server Setup has encountered the following error:
The required MSI package 'D:\SQL Sever 2008 R2 Developer Edition\x86\setup\sql_engine_core_shared_msi\sql_engine_core_shared.msi' doesn't exist.
Error code 0x84B20001.
I tried reinstalling the same. But results the same.
Please suggest. :)Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068709375
Exit facility code: 1202
Exit error code: 1
Exit message: The required MSI package 'D:\softwares\SQL Sever 2008 R2 Developer Edition\x86\setup\sql_engine_core_shared_msi\sql_engine_core_shared.msi'
doesn't exist.
Start time: 2013-12-31 20:47:50
End time: 2013-12-31 20:55:44
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131231_204629\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.1600.1%26EvtType%3d0xD2FD83B3%400xC2B0B50B%401202%401
Machine Properties:
Machine name: SAMPLE-PC
Machine processor count: 2
OS version: Windows 7
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2005
Tools 1033
Express Edition 9.2.3042 No
Sql Server 2005
ToolsClient 1033
Express Edition 9.2.3042 No
Sql Server 2005
ToolsClient\Connectivity 1033 Express Edition
9.2.3042 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services
1033 Express Edition 10.1.2531.0 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication
1033 Express Edition 10.1.2531.0 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: D:\softwares\SQL Sever 2008 R2 Developer Edition\x86\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: TEST
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: TEST
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: SAMPLE-PC\SAMPLE
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131231_204629\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: TEST
INSTANCENAME: TEST
ISSVCACCOUNT: TEST
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: SAMPLE-PC\TEST
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: TEST
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: SAMPLE-PC\SAMPLE
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131231_204629\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Analysis Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Integration Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131231_204629\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.ChainerInvalidOperationException
Message:
The required MSI package 'D:\softwares\SQL Sever 2008 R2 Developer Edition\x86\setup\sql_engine_core_shared_msi\sql_engine_core_shared.msi' doesn't exist.
Data:
ChainerInvalidOperationExceptionData = InstallPackage
DisableWatson = true
Stack:
at Microsoft.SqlServer.Configuration.SetupExtension.MsiInstallEngineActionBehavior.ModifyAction(String installedProductCode, String installedProductVersion, String pathOfPackageOnMedia, InstallAction pkgAction)
at Microsoft.SqlServer.Configuration.SetupExtension.MSIInstallerEngine.InstallPackage(PackageId pkg, InstallAction pkgAction)
at Microsoft.SqlServer.Configuration.MsiExtension.PackageInstallAction.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun) -
Error while installing the named instance SQL 2012 Sp1
Hi,
I am getting below error while installing the named instance with features Data base engine. on same server box 2 named instance already installed and working...please suggest. i have done a lot of troubleshooting..(configure local system for Db engines
during installation, tried to install after another domain ID., repair and uninstalled existing and retried.) .. please s if i need to do anything else to resolve the issue.. installation account is domain admin account...
Can i rename the installation domain account profile from sql server that used for 2 named instance and for 3 rd named instance i am trying... is any impact after profile rename from the local sql server on any instance already configured...
Shailendra Devthanks alberto.
here is
2015-03-24 19:48:49.42 Server Microsoft SQL Server 2012 (SP1) - 11.0.3000.0 (X64)
Oct 19 2012 13:38:57
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
2015-03-24 19:48:49.42 Server (c) Microsoft Corporation.
2015-03-24 19:48:49.42 Server All rights reserved.
2015-03-24 19:48:49.42 Server Server process ID is 3460.
2015-03-24 19:48:49.42 Server System Manufacturer: 'Xen', System Model: 'HVM domU'.
2015-03-24 19:48:49.42 Server Authentication mode is WINDOWS-ONLY.
2015-03-24 19:48:49.42 Server Logging SQL Server messages in file 'D:\Program Files\Microsoft SQL Server\MSSQL11.SCSMDB\MSSQL\Log\ERRORLOG'.
2015-03-24 19:48:49.42 Server The service account is 'AIRWORKS\scadmin'. This is an informational message; no user action is required.
2015-03-24 19:48:49.42 Server Registry startup parameters:
-d D:\Program Files\Microsoft SQL Server\MSSQL11.SCSMDB\MSSQL\DATA\master.mdf
-e D:\Program Files\Microsoft SQL Server\MSSQL11.SCSMDB\MSSQL\Log\ERRORLOG
-l D:\Program Files\Microsoft SQL Server\MSSQL11.SCSMDB\MSSQL\DATA\mastlog.ldf
2015-03-24 19:48:49.42 Server Command Line Startup Parameters:
-s "SCSMDB"
-m "SqlSetup"
-T 4022
-T 4010
-T 1905
-T 3701
-T 8015
2015-03-24 19:48:49.69 Server SQL Server detected 1 sockets with 1 cores per socket and 2 logical processors per socket, 2 total logical processors; using 2 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2015-03-24 19:48:49.69 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2015-03-24 19:48:49.69 Server Detected 15624 MB of RAM. This is an informational message; no user action is required.
2015-03-24 19:48:49.69 Server Using conventional memory in the memory manager.
2015-03-24 19:48:49.98 Server Perfmon counters for resource governor pools and groups failed to initialize and are disabled.
2015-03-24 19:48:50.01 Server This instance of SQL Server last reported using a process ID of 5124 at 3/24/2015 7:48:48 PM (local) 3/24/2015 2:18:48 PM (UTC). This is an informational message only; no user action is required.
2015-03-24 19:48:50.03 Server Node configuration: node 0: CPU mask: 0x0000000000000003:0 Active CPU mask: 0x0000000000000003:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2015-03-24 19:48:50.07 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2015-03-24 19:48:50.30 Server Database Mirroring Transport is disabled in the endpoint configuration.
2015-03-24 19:48:50.58 spid5s Warning ******************
2015-03-24 19:48:50.65 spid5s SQL Server started in single-user mode. This an informational message only. No user action is required.
2015-03-24 19:48:50.66 spid5s Starting up database 'master'.
2015-03-24 19:48:50.90 spid5s 9 transactions rolled forward in database 'master' (1:0). This is an informational message only. No user action is required.
2015-03-24 19:48:51.04 Server CLR version v4.0.30319 loaded.
2015-03-24 19:48:51.17 spid5s 0 transactions rolled back in database 'master' (1:0). This is an informational message only. No user action is required.
2015-03-24 19:48:51.17 spid5s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2015-03-24 19:48:51.39 Server Software Usage Metrics is enabled.
2015-03-24 19:48:51.81 spid5s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2015-03-24 19:48:51.83 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2015-03-24 19:48:51.86 spid5s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2015-03-24 19:48:52.02 spid5s SQL Trace ID 1 was started by login "sa".
2015-03-24 19:48:52.16 spid5s Server name is 'AWISCDB\SCSMDB'. This is an informational message only. No user action is required.
2015-03-24 19:48:52.35 spid12s The certificate [Cert Hash(sha1) "151C8B90A9A8AF12F5EFAE3439F691E2C01A7355"] was successfully loaded for encryption.
2015-03-24 19:48:52.35 spid12s Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\SCSMDB ].
2015-03-24 19:48:52.40 spid12s Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the trace flag 7806.
This is an informational message only. No user action is required.
2015-03-24 19:48:52.43 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Windows return code: 0x490, state: 16. Failure to register a SPN might cause integrated
authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually registered.
2015-03-24 19:48:52.45 Server SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not be possible until a SPN is registered for the SQL Server service. This is an informational
message. No user action is required.
2015-03-24 19:48:54.03 Server The SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [ MSSQLSvc/AWISCDB.AIRWORKS.IN:SCSMDB ] for the SQL Server service.
2015-03-24 19:48:54.03 spid14s A new instance of the full-text filter daemon host process has been successfully started.
2015-03-24 19:48:54.86 spid6s Starting up database 'mssqlsystemresource'.
2015-03-24 19:48:54.86 spid5s Starting up database 'msdb'.
2015-03-24 19:48:54.87 spid6s The resource database build version is 11.00.3000. This is an informational message only. No user action is required.
2015-03-24 19:48:55.21 spid5s 12 transactions rolled forward in database 'msdb' (4:0). This is an informational message only. No user action is required.
2015-03-24 19:48:55.32 spid5s 0 transactions rolled back in database 'msdb' (4:0). This is an informational message only. No user action is required.
2015-03-24 19:48:55.32 spid6s Starting up database 'model'.
2015-03-24 19:48:55.32 spid5s Recovery is writing a checkpoint in database 'msdb' (4). This is an informational message only. No user action is required.
2015-03-24 19:48:55.72 spid6s Clearing tempdb database.
2015-03-24 19:48:57.22 spid6s Starting up database 'tempdb'.
2015-03-24 19:48:59.04 spid5s Database 'master' is upgrading script 'msdb110_upgrade.sql' from level 184551476 to level 184552376.
2015-03-24 19:48:59.04 spid5s ----------------------------------
2015-03-24 19:48:59.04 spid5s Starting execution of PRE_MSDB.SQL
2015-03-24 19:48:59.04 spid5s ----------------------------------
2015-03-24 19:49:00.23 spid5s Setting database option COMPATIBILITY_LEVEL to 100 for database 'msdb'.
2015-03-24 19:49:00.57 spid5s -----------------------------------------
2015-03-24 19:49:00.57 spid5s Starting execution of PRE_SQLAGENT100.SQL
2015-03-24 19:49:00.57 spid5s -----------------------------------------
2015-03-24 19:49:00.61 spid5s Setting database option COMPATIBILITY_LEVEL to 110 for database 'msdb'.
2015-03-24 19:49:00.73 spid5s Configuration option 'allow updates' changed from 1 to 1. Run the RECONFIGURE statement to install.
2015-03-24 19:49:00.73 spid5s Configuration option 'allow updates' changed from 1 to 1. Run the RECONFIGURE statement to install.
2015-03-24 19:49:01.78 spid5s Attempting to load library 'xpstar.dll' into memory. This is an informational message only. No user action is required.
2015-03-24 19:49:01.79 spid5s Using 'xpstar.dll' version '2011.110.3000' to execute extended stored procedure 'xp_instance_regread'. This is an informational message only; no user action is required.
2015-03-24 19:49:01.80 spid5s DBCC TRACEOFF 1717, server process ID (SPID) 5. This is an informational message only; no user action is required.
2015-03-24 19:49:01.80 spid5s DBCC execution completed. If DBCC printed error messages, contact your system administrator.
2015-03-24 19:49:01.81 spid5s
2015-03-24 19:49:01.81 spid5s Creating table temp_sysjobschedules
2015-03-24 19:49:01.91 spid5s
2015-03-24 19:49:01.91 spid5s Alter table sysdownloadlist...
2015-03-24 19:49:01.92 spid5s
2015-03-24 19:49:01.92 spid5s Alter table sysjobhistory...
2015-03-24 19:49:01.92 spid5s
2015-03-24 19:49:01.92 spid5s Alter table systargetservers...
2015-03-24 19:49:01.92 spid5s
2015-03-24 19:49:01.92 spid5s Alter table sysjobsteps...
2015-03-24 19:49:01.99 spid5s Configuration option 'allow updates' changed from 1 to 0. Run the RECONFIGURE statement to install.
2015-03-24 19:49:01.99 spid5s Configuration option 'allow updates' changed from 1 to 0. Run the RECONFIGURE statement to install.
2015-03-24 19:49:01.99 spid5s
2015-03-24 19:49:01.99 spid5s -----------------------------------------
2015-03-24 19:49:01.99 spid5s Execution of PRE_SQLAGENT100.SQL complete
2015-03-24 19:49:01.99 spid5s -----------------------------------------
2015-03-24 19:49:02.01 spid5s DMF pre-upgrade steps...
2015-03-24 19:49:02.13 spid5s DC pre-upgrade steps...
2015-03-24 19:49:02.13 spid5s Check if Data collector config table exists...
2015-03-24 19:49:02.13 spid5s Data Collector state before upgrade: 0
2015-03-24 19:49:02.13 spid5s pre_dc100::Check if syscollector_collection_sets_internal table exists...
2015-03-24 19:49:02.13 spid5s pre_dc100::Capturing Collection set status in temp table...
2015-03-24 19:49:02.19 spid5s Deleting cached auto-generated T-SQL Data Collection packages from msdb...
2015-03-24 19:49:02.19 spid5s End of DC pre-upgrade steps.
2015-03-24 19:49:02.19 spid5s DAC pre-upgrade steps...
2015-03-24 19:49:02.19 spid5s Starting DAC pre-upgrade steps ...
2015-03-24 19:49:02.19 spid5s End of DAC pre-upgrade steps.
2015-03-24 19:49:02.19 spid5s ----------------------------------
2015-03-24 19:49:02.19 spid5s Starting execution of MSDB.SQL
2015-03-24 19:49:02.19 spid5s ----------------------------------
2015-03-24 19:49:02.23 spid5s Configuration option 'allow updates' changed from 0 to 1. Run the RECONFIGURE statement to install.
2015-03-24 19:49:02.23 spid5s Configuration option 'allow updates' changed from 0 to 1. Run the RECONFIGURE statement to install.
2015-03-24 19:49:02.27 spid5s Checking the size of MSDB...
2015-03-24 19:49:02.53 spid5s
2015-03-24 19:49:02.53 spid5s Setting database option TRUSTWORTHY to ON for database 'msdb'.
2015-03-24 19:49:02.53 spid5s Setting database option RECOVERY to SIMPLE for database 'msdb'.
2015-03-24 19:49:02.64 spid5s ----------------------------------
2015-03-24 19:49:02.64 spid5s Finished execution of MSDB.SQL
2015-03-24 19:49:02.64 spid5s ----------------------------------
2015-03-24 19:49:02.64 spid5s -----------------------------------------
2015-03-24 19:49:02.64 spid5s Starting execution of MSDB_VERSIONING.SQL
2015-03-24 19:49:02.64 spid5s -----------------------------------------
2015-03-24 19:49:02.64 spid5s -----------------------------------------
2015-03-24 19:49:02.64 spid5s Finished execution of MSDB_VERSIONING.SQL
2015-03-24 19:49:02.64 spid5s -----------------------------------------
2015-03-24 19:49:02.64 spid5s Dropping view MSdatatype_mappings...
2015-03-24 19:49:02.65 spid5s Dropping view sysdatatypemappings...
2015-03-24 19:49:02.65 spid5s Dropping table MSdbms_datatype_mapping...
2015-03-24 19:49:02.66 spid5s Dropping table MSdbms_map...
2015-03-24 19:49:02.67 spid5s Dropping table MSdbms_datatype...
2015-03-24 19:49:02.67 spid5s Dropping table MSdbms...
2015-03-24 19:49:02.73 spid5s Creating table MSdbms
2015-03-24 19:49:02.75 spid5s Creating table MSdbms_datatype
2015-03-24 19:49:03.01 spid5s Creating table MSdbms_map
2015-03-24 19:49:03.02 spid5s Creating table MSdbms_datatype_mapping
2015-03-24 19:49:03.03 spid5s Definining default datatype mappings
2015-03-24 19:49:03.04 spid5s Creating datatype mappings for MSSQLSERVER to ORACLE8
2015-03-24 19:49:03.21 spid5s Creating datatype mappings for MSSQLSERVER to ORACLE9
2015-03-24 19:49:03.29 spid5s Creating datatype mappings for MSSQLSERVER to ORACLE10
2015-03-24 19:49:03.37 spid5s Creating datatype mappings for MSSQLSERVER to ORACLE11
2015-03-24 19:49:03.46 spid5s Creating datatype mappings for MSSQLSERVER to DB2
2015-03-24 19:49:03.54 spid5s Creating datatype mappings for MSSQLSERVER to SYBASE
2015-03-24 19:49:03.62 spid5s Creating datatype mappings for ORACLE8 to MSSQLSERVER
2015-03-24 19:49:03.71 spid5s Creating datatype mappings for ORACLE9 to MSSQLSERVER
2015-03-24 19:49:03.83 spid5s Creating datatype mappings for ORACLE10 to MSSQLServer
2015-03-24 19:49:03.95 spid5s Creating datatype mappings for ORACLE11 to MSSQLServer
2015-03-24 19:49:04.08 spid5s Creating view MSdatatype_mappings
2015-03-24 19:49:04.08 spid5s Creating view sysdatatypemappings
2015-03-24 19:49:05.08 spid5s
2015-03-24 19:49:05.08 spid5s Creating table syssubsystems...
2015-03-24 19:49:05.09 spid5s
2015-03-24 19:49:05.09 spid5s Creating view sysproxyloginsubsystem_view...
2015-03-24 19:49:05.11 spid5s
2015-03-24 19:49:05.11 spid5s Creating trigger trig_sysoriginatingservers_delete...
2015-03-24 19:49:05.11 spid5s
2015-03-24 19:49:05.11 spid5s Creating view sysoriginatingservers_view...
2015-03-24 19:49:05.12 spid5s
2015-03-24 19:49:05.12 spid5s Creating trigger trig_sysjobs_insert_update...
2015-03-24 19:49:05.13 spid5s
2015-03-24 19:49:05.13 spid5s Creating view sysjobs_view...
2015-03-24 19:49:05.15 spid5s
2015-03-24 19:49:05.15 spid5s Creating trigger trig_sysschedules_insert_update...
2015-03-24 19:49:05.16 spid5s
2015-03-24 19:49:05.16 spid5s Creating view sysschedules_localserver_view...
2015-03-24 19:49:05.21 spid5s
2015-03-24 19:49:05.21 spid5s Creating view systargetservers_view...
2015-03-24 19:49:05.23 spid5s
2015-03-24 19:49:05.23 spid5s Creating view sysalerts_performance_counters_view...
2015-03-24 19:49:05.25 spid5s
2015-03-24 19:49:05.25 spid5s Creating function SQLAGENT_SUSER_SNAME ...
2015-03-24 19:49:05.25 spid5s
2015-03-24 19:49:05.25 spid5s Creating function SQLAGENT_SUSER_SID ...
2015-03-24 19:49:05.26 spid5s
2015-03-24 19:49:05.26 spid5s Creating procedure SP_SQLAGENT_IS_SRVROLEMEMBER...
2015-03-24 19:49:05.27 spid5s
2015-03-24 19:49:05.27 spid5s Creating procedure sp_verify_category_identifiers...
2015-03-24 19:49:05.27 spid5s
2015-03-24 19:49:05.27 spid5s Creating function agent_datetime...
2015-03-24 19:49:05.27 spid5s
2015-03-24 19:49:05.27 spid5s Creating procedure sp_verify_proxy_identifiers...
2015-03-24 19:49:05.28 spid5s
2015-03-24 19:49:05.28 spid5s Creating procedure sp_verify_credential_identifiers...
2015-03-24 19:49:05.29 spid5s
2015-03-24 19:49:05.29 spid5s Creating procedure sp_verify_subsystems...
2015-03-24 19:49:05.30 spid5s
2015-03-24 19:49:05.30 spid5s Creating procedure sp_verify_subsystem_identifiers...
2015-03-24 19:49:05.30 spid5s
2015-03-24 19:49:05.30 spid5s Creating procedure sp_verify_login_identifiers...
2015-03-24 19:49:05.31 spid5s
2015-03-24 19:49:05.31 spid5s Creating procedure sp_verify_proxy...
2015-03-24 19:49:05.31 spid5s
2015-03-24 19:49:05.31 spid5s Creating procedure sp_add_proxy...
2015-03-24 19:49:05.32 spid5s
2015-03-24 19:49:05.32 spid5s Creating procedure sp_delete_proxy...
2015-03-24 19:49:05.32 spid5s
2015-03-24 19:49:05.32 spid5s Creating procedure sp_update_proxy...
2015-03-24 19:49:05.33 spid5s
2015-03-24 19:49:05.33 spid5s Creating procedure sp_sqlagent_is_member...
2015-03-24 19:49:05.33 spid5s
2015-03-24 19:49:05.33 spid5s Creating procedure sp_verify_proxy_permissions...
2015-03-24 19:49:05.34 spid5s
2015-03-24 19:49:05.34 spid5s Creating procedure sp_help_proxy...
2015-03-24 19:49:05.35 spid5s
2015-03-24 19:49:05.35 spid5s Creating procedure sp_get_proxy_properties...
2015-03-24 19:49:05.36 spid5s
2015-03-24 19:49:05.36 spid5s Creating procedure sp_grant_proxy_to_subsystem...
2015-03-24 19:49:05.36 spid5s
2015-03-24 19:49:05.36 spid5s Creating procedure sp_grant_login_to_proxy...
2015-03-24 19:49:05.37 spid5s
2015-03-24 19:49:05.37 spid5s Creating procedure sp_revoke_login_from_proxy...
2015-03-24 19:49:05.37 spid5s
2015-03-24 19:49:05.37 spid5s Creating procedure sp_revoke_proxy_from_subsystem...
2015-03-24 19:49:05.38 spid5s
2015-03-24 19:49:05.38 spid5s Creating procedure sp_enum_proxy_for_subsystem...
2015-03-24 19:49:05.38 spid5s
2015-03-24 19:49:05.38 spid5s Creating procedure sp_enum_login_for_proxy...
2015-03-24 19:49:05.39 spid5s
2015-03-24 19:49:05.39 spid5s Creating procedure sp_reassign_proxy...
2015-03-24 19:49:05.40 spid5s
2015-03-24 19:49:05.40 spid5s Creating procedure sp_sqlagent_get_startup_info...
2015-03-24 19:49:05.41 spid5s
2015-03-24 19:49:05.41 spid5s Creating procedure sp_sqlagent_update_agent_xps...
2015-03-24 19:49:05.42 spid5s
2015-03-24 19:49:05.42 spid5s Creating procedure sp_sqlagent_has_server_access...
2015-03-24 19:49:05.45 spid5s
2015-03-24 19:49:05.45 spid5s Creating procedure sp_sqlagent_get_perf_counters...
2015-03-24 19:49:05.46 spid5s
2015-03-24 19:49:05.46 spid5s Creating procedure sp_sqlagent_notify...
2015-03-24 19:49:05.47 spid5s
2015-03-24 19:49:05.47 spid5s Creating procedure sp_is_sqlagent_starting...
2015-03-24 19:49:05.47 spid5s
2015-03-24 19:49:05.47 spid5s Creating procedure sp_verify_job_identifiers...
2015-03-24 19:49:05.48 spid5s
2015-03-24 19:49:05.48 spid5s Creating procedure sp_verify_schedule_identifiers...
2015-03-24 19:49:05.49 spid5s
2015-03-24 19:49:05.49 spid5s Creating procedure sp_verify_jobproc_caller...
2015-03-24 19:49:05.50 spid5s
2015-03-24 19:49:05.50 spid5s Creating procedure sp_downloaded_row_limiter...
2015-03-24 19:49:05.51 spid5s
2015-03-24 19:49:05.51 spid5s Creating procedure sp_post_msx_operation...
2015-03-24 19:49:05.54 spid5s
2015-03-24 19:49:05.54 spid5s Creating procedure sp_verify_performance_condition...
2015-03-24 19:49:05.58 spid5s
2015-03-24 19:49:05.58 spid5s Creating procedure sp_verify_job_date...
2015-03-24 19:49:05.59 spid5s
2015-03-24 19:49:05.59 spid5s Creating procedure sp_verify_job_time...
2015-03-24 19:49:05.61 spid5s
2015-03-24 19:49:05.61 spid5s Creating procedure sp_verify_alert...
2015-03-24 19:49:05.62 spid5s
2015-03-24 19:49:05.62 spid5s Creating procedure sp_update_alert...
2015-03-24 19:49:05.63 spid5s
2015-03-24 19:49:05.63 spid5s Creating procedure sp_delete_job_references...
2015-03-24 19:49:05.65 spid5s
2015-03-24 19:49:05.65 spid5s Creating procedure sp_delete_all_msx_jobs...
2015-03-24 19:49:05.66 spid5s
2015-03-24 19:49:05.66 spid5s Creating procedure sp_generate_target_server_job_assignment_sql...
2015-03-24 19:49:05.66 spid5s
2015-03-24 19:49:05.66 spid5s Creating procedure sp_generate_server_description...
2015-03-24 19:49:05.67 spid5s
2015-03-24 19:49:05.67 spid5s Creating procedure sp_msx_set_account...
2015-03-24 19:49:05.68 spid5s
2015-03-24 19:49:05.68 spid5s Creating procedure sp_msx_get_account...
2015-03-24 19:49:05.69 spid5s
2015-03-24 19:49:05.69 spid5s Creating procedure sp_delete_operator...
2015-03-24 19:49:05.70 spid5s
2015-03-24 19:49:05.70 spid5s Creating procedure sp_msx_defect...
2015-03-24 19:49:05.71 spid5s
2015-03-24 19:49:05.71 spid5s Creating procedure sp_msx_enlist...
2015-03-24 19:49:05.72 spid5s
2015-03-24 19:49:05.72 spid5s Creating procedure sp_delete_targetserver...
2015-03-24 19:49:05.73 spid5s
2015-03-24 19:49:05.73 spid5s Creating procedure sp_enlist_tsx
2015-03-24 19:49:05.74 spid5s
2015-03-24 19:49:05.74 spid5s Creating procedure sp_get_sqlagent_properties...
2015-03-24 19:49:05.76 spid5s
2015-03-24 19:49:05.76 spid5s Create procedure sp_set_sqlagent_properties...
2015-03-24 19:49:05.76 spid5s
2015-03-24 19:49:05.76 spid5s Creating procedure sp_add_targetservergroup...
2015-03-24 19:49:05.77 spid5s
2015-03-24 19:49:05.77 spid5s Creating procedure sp_update_targetservergroup...
2015-03-24 19:49:05.78 spid5s
2015-03-24 19:49:05.78 spid5s Creating procedure sp_delete_targetservergroup...
2015-03-24 19:49:05.78 spid5s
2015-03-24 19:49:05.78 spid5s Creating procedure sp_help_targetservergroup...
2015-03-24 19:49:05.79 spid5s
2015-03-24 19:49:05.79 spid5s Creating procedure sp_add_targetsvgrp_member...
2015-03-24 19:49:05.80 spid5s
2015-03-24 19:49:05.80 spid5s Creating procedure sp_delete_targetsvrgrp_member...
2015-03-24 19:49:05.81 spid5s
2015-03-24 19:49:05.81 spid5s Creating procedure sp_verify_category...
2015-03-24 19:49:05.81 spid5s
2015-03-24 19:49:05.81 spid5s Creating procedure sp_add_category...
2015-03-24 19:49:05.82 spid5s
2015-03-24 19:49:05.82 spid5s Creating procedure sp_update_category...
2015-03-24 19:49:05.83 spid5s
2015-03-24 19:49:05.83 spid5s Creating procedure sp_delete_category...
2015-03-24 19:49:05.83 spid5s
2015-03-24 19:49:05.84 spid5s Creating procedure sp_help_category...
2015-03-24 19:49:05.84 spid5s
2015-03-24 19:49:05.84 spid5s Creating procedure sp_help_targetserver...
2015-03-24 19:49:05.85 spid5s
2015-03-24 19:49:05.85 spid5s Creating procedure sp_resync_targetserver...
2015-03-24 19:49:06.06 spid5s
2015-03-24 19:49:06.06 spid5s Creating procedure sp_purge_jobhistory...
2015-03-24 19:49:06.09 spid5s
2015-03-24 19:49:06.09 spid5s Creating procedure sp_help_jobhistory...
2015-03-24 19:49:06.10 spid5s
2015-03-24 19:49:06.10 spid5s Creating procedure sp_add_jobserver...
2015-03-24 19:49:06.11 spid5s
2015-03-24 19:49:06.11 spid5s Creating procedure sp_delete_jobserver...
2015-03-24 19:49:06.11 spid5s Error: 10011, Severity: 16, State: 1.
2015-03-24 19:49:06.11 spid5s Access denied.
2015-03-24 19:49:06.11 spid5s Error: 917, Severity: 15, State: 1.
2015-03-24 19:49:06.11 spid5s An upgrade script batch failed to execute for database 'master' due to compilation error. Check the previous error message for the line which caused compilation to fail.
2015-03-24 19:49:06.11 spid5s Error: 912, Severity: 21, State: 2.
2015-03-24 19:49:06.11 spid5s Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 917, state 1, severity 15. This is a serious error condition which might interfere with regular
operation and the database will be taken offline. If the error happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective
actions and re-start the database so that the script upgrade steps run to completion.
2015-03-24 19:49:06.11 spid5s Error: 3417, Severity: 21, State: 3.
2015-03-24 19:49:06.11 spid5s Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup, repair it, or rebuild it. For more information about how to rebuild the master database, see SQL Server Books
Online.
2015-03-24 19:49:06.12 spid5s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
2015-03-24 19:49:06.50 spid12s The SQL Server Network Interface library successfully deregistered the Service Principal Name (SPN) [ MSSQLSvc/AWISCDB.AIRWORKS.IN:SCSMDB ] for the SQL Server service.
Shailendra Dev -
Error while installing SAP NetWeaver Composition Environment 7.1 SR3
I got the following error while installing SAP NetWeaver Composition Environment 7.1 SR3 Evalution SDN Version - Java EE only
on my Windows XP, 1 GB RAM, 1.6 GHZ processor speed
An error occurred while processing service SAP NetWeaver CE Developer Edition > SAP NetWeaver CE Development System( Last error reported by the step :Java EE Engine configuration error. DIAGNOSIS: See output of logfile configtool.0.trc: ' INFO: Loading tool launcher... INFO: [OS: Windows XP] [VM vendor: SAP AG] [VM version: 5.1.000] [VM type: SAP Java Server VM] INFO: Main class to start: "com.sap.engine.configtool.batch.BatchInstall" INFO: Loading 51 JAR files: [D:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_jce.jar, D:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_jsse.jar, D:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_smime.jar, D:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_ssl.jar, D:\usr\sap\CE1\SYS\global\security\lib\tools\w3c_http.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jaas.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jdbc.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jload.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jperflib.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jsizecheck.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jstartup.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jstartupapi.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jstartupimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comsl.ut.infoprovider_lib.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comsl.ut.manager.offline.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comslctcimport.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcantlrruntime.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcblconfigimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbldeploycontrolleroffline_phase_asm.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbliqlibimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljdsrjdsr.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljkernel_dummyframe_dummy.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljkernel_dummykernel_dummy.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljkernel_utilimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljrfcimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbloffline_launcherimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcblopensqlimplStandalone.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcblslutilityimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcdddbcatalogimplCatalog.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcdddbdictionarydatabaseimplDictionaryDatabase.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcexceptionimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtci18ncpjarIMPL.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjebootstrapimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjecfscontainerstandalone_impl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeclientlibimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeconfigtool.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeextramile.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeofflineconfigurationimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeofflinelicense.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeoffline_deployimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjewebcontainerimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcloggingjavaimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsapxmltoolkitsapxmltoolkit.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsdtcvlimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsecdestinationslibimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsecinstallertoolsimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcseclikeylikey_assembly.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsecsecstorefsjavacore.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\servlet.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\tcje~cl_deploy.jar, D:\sapdb\programs\runtime\jar\sapdbc.jar] INFO: Start PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path '.). You may now
choose Retry to repeat the current step.
choose View Log to get more information about the error.
stop the task and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL.
Plz help me..itz urgent,
Cheers,
Aravind.Hi Eric,
The trace file says,
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.7.1006]/>
<!NAME[configtool.trc]/>
<!PATTERN[configtool.trc]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[UTF8]/>
<!FILESET[0, 5, 1000000]/>
<!PREVIOUSFILE[configtool.4.trc]/>
<!NEXTFILE[configtool.1.trc]/>
<!LOGHEADER[END]/>
#1.5 #02004C4F4F50000000000001005E8D7DFFFFFFFFFFFFFFFF#1202100775046#configtool##configtool#######Thread[main,5,main]##0#0#Fatal#1#/configtool#Java###Can't connect to DB.
[EXCEPTION]
#1#com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:409)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:153)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:48)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:176)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:263)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:57)
at com.sap.engine.configtool.batch.BatchInstall.executeTasks(BatchInstall.java:192)
at com.sap.engine.configtool.batch.BatchInstall.main(BatchInstall.java:238)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Caused by: com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://computer/CE1 [Restart required].
at com.sap.dbtech.jdbc.DriverSapDB.connect(DriverSapDB.java:216)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.createVendorConnection(DriverPooledConnectionFactory.java:50)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.getPooledConnection(DriverPooledConnectionFactory.java:37)
at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:677)
at com.sap.sql.connect.datasource.DBDataSourceImpl.newPooledConnection(DBDataSourceImpl.java:626)
at com.sap.sql.connect.datasource.DBDataSourceImpl.getPooledConnection(DBDataSourceImpl.java:165)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:211)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:353)
... 12 more
#1.5 #02004C4F4F5000000000000101904E0DFFFFFFFFFFFFFFFF#1202101914781#configtool##configtool#######Thread[main,5,main]##0#0#Fatal#1#/configtool#Java###Can't connect to DB.
[EXCEPTION]
#1#com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:409)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:153)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:48)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:176)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:263)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:57)
at com.sap.engine.configtool.batch.BatchInstall.executeTasks(BatchInstall.java:192)
at com.sap.engine.configtool.batch.BatchInstall.main(BatchInstall.java:238)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Caused by: com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://computer/CE1 [Restart required].
at com.sap.dbtech.jdbc.DriverSapDB.connect(DriverSapDB.java:216)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.createVendorConnection(DriverPooledConnectionFactory.java:50)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.getPooledConnection(DriverPooledConnectionFactory.java:37)
at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:677)
at com.sap.sql.connect.datasource.DBDataSourceImpl.newPooledConnection(DBDataSourceImpl.java:626)
at com.sap.sql.connect.datasource.DBDataSourceImpl.getPooledConnection(DBDataSourceImpl.java:165)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:211)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:353)
... 12 more
#1.5 #02004C4F4F50000000000001014B84C7FFFFFFFFFFFFFFFF#1202102025296#configtool##configtool#######Thread[main,5,main]##0#0#Fatal#1#/configtool#Java###Can't connect to DB.
[EXCEPTION]
#1#com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:409)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:153)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:48)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:176)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:263)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:57)
at com.sap.engine.configtool.batch.BatchInstall.executeTasks(BatchInstall.java:192)
at com.sap.engine.configtool.batch.BatchInstall.main(BatchInstall.java:238)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Caused by: com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://computer/CE1 [Restart required].
at com.sap.dbtech.jdbc.DriverSapDB.connect(DriverSapDB.java:216)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.createVendorConnection(DriverPooledConnectionFactory.java:50)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.getPooledConnection(DriverPooledConnectionFactory.java:37)
at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:677)
at com.sap.sql.connect.datasource.DBDataSourceImpl.newPooledConnection(DBDataSourceImpl.java:626)
at com.sap.sql.connect.datasource.DBDataSourceImpl.getPooledConnection(DBDataSourceImpl.java:165)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:211)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:353)
... 12 more
#1.5 #02004C4F4F5000000000000100E0C7C3FFFFFFFFFFFFFFFF#1202099599843#configtool##configtool#######Thread[main,5,main]##0#0#Fatal#1#/configtool#Java###Can't connect to DB.
[EXCEPTION]
#1#com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:409)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:153)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:48)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:176)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:263)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:57)
at com.sap.engine.configtool.batch.BatchInstall.executeTasks(BatchInstall.java:192)
at com.sap.engine.configtool.batch.BatchInstall.main(BatchInstall.java:238)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Caused by: com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://computer/CE1 [Restart required].
at com.sap.dbtech.jdbc.DriverSapDB.connect(DriverSapDB.java:216)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.createVendorConnection(DriverPooledConnectionFactory.java:50)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.getPooledConnection(DriverPooledConnectionFactory.java:37)
at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:677)
at com.sap.sql.connect.datasource.DBDataSourceImpl.newPooledConnection(DBDataSourceImpl.java:626)
at com.sap.sql.connect.datasource.DBDataSourceImpl.getPooledConnection(DBDataSourceImpl.java:165)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:211)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:353)
... 12 more
#1.5 #02004C4F4F5000000000000100C22A3BFFFFFFFFFFFFFFFF#1202101476187#configtool##configtool#######Thread[main,5,main]##0#0#Fatal#1#/configtool#Java###Can't connect to DB.
[EXCEPTION]
#1#com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:409)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:153)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:48)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:176)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:263)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:57)
at com.sap.engine.configtool.batch.BatchInstall.executeTasks(BatchInstall.java:192)
at com.sap.engine.configtool.batch.BatchInstall.main(BatchInstall.java:238)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Caused by: com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://computer/CE1 [Restart required].
at com.sap.dbtech.jdbc.DriverSapDB.connect(DriverSapDB.java:216)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.createVendorConnection(DriverPooledConnectionFactory.java:50)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.getPooledConnection(DriverPooledConnectionFactory.java:37)
at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:677)
at com.sap.sql.connect.datasource.DBDataSourceImpl.newPooledConnection(DBDataSourceImpl.java:626)
at com.sap.sql.connect.datasource.DBDataSourceImpl.getPooledConnection(DBDataSourceImpl.java:165)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:211)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:353)
... 12 more
#1.5 #02004C4F4F50000000000001014B84C7FFFFFFFFFFFFFFFF#1202107230359#configtool##configtool#######Thread[main,5,main]##0#0#Fatal#1#/configtool#Java###Can't connect to DB.
[EXCEPTION]
#1#com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:409)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:153)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:48)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:176)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:263)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:57)
at com.sap.engine.configtool.batch.BatchInstall.executeTasks(BatchInstall.java:192)
at com.sap.engine.configtool.batch.BatchInstall.main(BatchInstall.java:238)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Caused by: com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://computer/CE1 [Restart required].
at com.sap.dbtech.jdbc.DriverSapDB.connect(DriverSapDB.java:216)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.createVendorConnection(DriverPooledConnectionFactory.java:50)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.getPooledConnection(DriverPooledConnectionFactory.java:37)
at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:677)
at com.sap.sql.connect.datasource.DBDataSourceImpl.newPooledConnection(DBDataSourceImpl.java:626)
at com.sap.sql.connect.datasource.DBDataSourceImpl.getPooledConnection(DBDataSourceImpl.java:165)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:211)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:353)
... 12 more
Can you please advice me how to get rid of this problem?
Is there any prob with MAC address resolution or loop back adapter? if yes, how to get rid of that?
Cheers,
Aravind -
Error while installing CE SR3 on windows
I got the following error while installing SAP NetWeaver Composition Environment 7.1 SR3 Evalution SDN Version - Java EE only
on my Windows XP, 1 GB RAM, 1.6 GHZ processor speed
An error occurred while processing service SAP NetWeaver CE Developer Edition > SAP NetWeaver CE Development System( Last error reported by the step :Java EE Engine configuration error. DIAGNOSIS: See output of logfile configtool.0.trc: ' INFO: Loading tool launcher... INFO: [OS: Windows XP] [VM vendor: SAP AG] [VM version: 5.1.000] [VM type: SAP Java Server VM] INFO: Main class to start: "com.sap.engine.configtool.batch.BatchInstall" INFO: Loading 51 JAR files: [D:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_jce.jar, D:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_jsse.jar, D:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_smime.jar, D:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_ssl.jar, D:\usr\sap\CE1\SYS\global\security\lib\tools\w3c_http.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jaas.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jdbc.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jload.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jperflib.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jsizecheck.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jstartup.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jstartupapi.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jstartupimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comsl.ut.infoprovider_lib.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comsl.ut.manager.offline.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comslctcimport.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcantlrruntime.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcblconfigimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbldeploycontrolleroffline_phase_asm.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbliqlibimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljdsrjdsr.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljkernel_dummyframe_dummy.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljkernel_dummykernel_dummy.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljkernel_utilimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljrfcimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbloffline_launcherimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcblopensqlimplStandalone.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcblslutilityimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcdddbcatalogimplCatalog.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcdddbdictionarydatabaseimplDictionaryDatabase.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcexceptionimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtci18ncpjarIMPL.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjebootstrapimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjecfscontainerstandalone_impl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeclientlibimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeconfigtool.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeextramile.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeofflineconfigurationimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeofflinelicense.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeoffline_deployimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjewebcontainerimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcloggingjavaimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsapxmltoolkitsapxmltoolkit.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsdtcvlimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsecdestinationslibimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsecinstallertoolsimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcseclikeylikey_assembly.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsecsecstorefsjavacore.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\servlet.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\tcje~cl_deploy.jar, D:\sapdb\programs\runtime\jar\sapdbc.jar] INFO: Start PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path '.). You may now
choose Retry to repeat the current step.
choose View Log to get more information about the error.
stop the task and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL.
Plz help me..itz urgent,
Cheers,
Aravind.Rajesh.Rathod wrote:
Dear All,
Previously i had installed ORACLEM 9i. I deinstalled using UNIVERSAL INSTALLER .Now when i try to install ORACLE 10g it is giving error Which Oracle 10g on which Windows version ?
Nicolas. -
Error while installing SAP Gateway
Hi,
I am getting the following error while installing SAP Gateway.
INFO 2009-09-24 06:11:18.815
Execute step stopInstance of component |NW_Gateway|ind|ind|ind|ind|0|0|NW_GW_Instance|ind|ind|ind|ind|7|0|NW_Instance|ind|ind|ind|ind|0|0
INFO 2009-09-24 06:11:19.238
Creating file C:\Program Files\sapinst_instdir\NW04S\STANDALONE\GW\stop_QAS_G00.log.
ERROR 2009-09-24 06:11:19.238
FSL-06002 Error 216 (Unknown, try 'net helpmsg <Nr>') in execution of a 'CreateProcess' function, line (310), with parameter (E:\usr\sap\QAS\SYS\exe\nuc\NTI386\stopsap.exe ...).
ERROR 2009-09-24 06:11:19.238
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2009-09-24 06:11:19.253
FCO-00011 The step stopInstance with step key |NW_Gateway|ind|ind|ind|ind|0|0|NW_GW_Instance|ind|ind|ind|ind|7|0|NW_Instance|ind|ind|ind|ind|0|0|stopInstance was executed with status ERROR ( Last error reported by the step :Caught ESyException in Modulecall: ESAPinstException: error text undefined.).
Regards,
RajivHi Sunny,
This installation is being done on windows.
The logs are
Preprocess of component |NW_Gateway|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0
INFO 2009-09-24 06:11:18.643
Copied file 'C:/Program Files/sapinst_instdir/NW04S/STANDALONE/GW/keydb.xml' to 'C:/Program Files/sapinst_instdir/NW04S/STANDALONE/GW/keydb.2.xml'.
INFO 2009-09-24 06:11:18.784
Copied file 'C:/Program Files/sapinst_instdir/NW04S/STANDALONE/GW/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/STANDALONE/GW/statistic.5.xml'.
INFO 2009-09-24 06:11:18.815
Execute step stopInstance of component |NW_Gateway|ind|ind|ind|ind|0|0|NW_GW_Instance|ind|ind|ind|ind|7|0|NW_Instance|ind|ind|ind|ind|0|0
INFO 2009-09-24 06:11:19.238
Creating file C:\Program Files\sapinst_instdir\NW04S\STANDALONE\GW\stop_QAS_G00.log.
ERROR 2009-09-24 06:11:19.238
FSL-06002 Error 216 (Unknown, try 'net helpmsg <Nr>') in execution of a 'CreateProcess' function, line (310), with parameter (E:\usr\sap\QAS\SYS\exe\nuc\NTI386\stopsap.exe ...).
Regards,
Rajiv -
Error while install EBS 11.5.10 on RHEL5 oracle unbreakable linux
hello
i got this error while install EBS and here is the log file
0/appsutil/out/VIS_oracle/templbac/adrundb1.sh
setting permissions: 755
setting ownership: applmgr:oinstall
Step 0 of 5
Command: /u01/oracle/visdb/9.2.0/temp/VIS_oracle/adrun9i.sh
Step 1 of 5: Doing UNIX preprocessing
Processing Step 1 of 5
Executing: /u01/oracle/visdb/9.2.0/temp/VIS_oracle/adrun9i.sh APPS APPS
STARTED INSTALL PHASE : 9i RDBMS : Wed Mar 18 11:26:45 EET 2009
runProcess_5
Statusstring Executing Command: InstantiateFile -d addbtmpl.drv
Cannot execute configure of environment for database ORACLE_HOME
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
plz helphere is the file after modification
Executing script in InstantiateFile:
/u01/oracle/visdb/9.2.0/Apache/perl/bin/perl -I /u01/oracle/visdb/9.2.0/Apache/perl/lib/5.00503:/u01/oracle/visdb/9.2.0/Apache/perl/lib/site_perl/5.005:/u01/oracle/visdb/9.2.0/appsutil/perl /u01/oracle/visdb/9.2.0/appsutil/scripts/VIS_oracle/adchknls.pl
script returned:
Validating information needed for NLS........
DATABASE version : db920
No NLS specific checks required
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Executing script in InstantiateFile:
/u01/oracle/visdb/9.2.0/appsutil/install/VIS_oracle/afmkinit.sh
script returned:
afmkinit.sh started at Wed Mar 18 10:38:41 EET 2009
The environment settings are as follows ...
ORACLE_HOME : /u01/oracle/visdb/9.2.0
ORACLE_SID : VIS
TWO_TASK :
PATH : /u01/oracle/visdb/9.2.0/Apache/perl/bin:/u01/oracle/visdb/9.2.0/bin:/usr/bin:/usr/sbin:/u01/oracle/visdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/usr/bin:/Stage11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/lib/qt-3.3/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/applmgr/bin
LD_LIBRARY_PATH : /u01/oracle/visdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u01/oracle/visdb/9.2.0/ctx/lib
afmkinit.sh exiting with status 127
.end std out.
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
.end err out.
Skipping INSTE8_PRF
Skipping INSTE8_APPLY
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /u01/oracle/visdb/9.2.0/appsutil/install/VIS_oracle
afmkinit.sh INSTE8_SETUP 127
AutoConfig is exiting with status 1
0/appsutil/out/VIS_oracle/03181056/adcctclean.sql
setting permissions: 600
Executing script in InstantiateFile:
/u01/oracle/visdb/9.2.0/Apache/perl/bin/perl -I /u01/oracle/visdb/9.2.0/Apache/perl/lib/5.00503:/u01/oracle/visdb/9.2.0/Apache/perl/lib/site_perl/5.005:/u01/oracle/visdb/9.2.0/appsutil/perl /u01/oracle/visdb/9.2.0/appsutil/scripts/VIS_oracle/adchknls.pl
script returned:
Validating information needed for NLS........
DATABASE version : db920
No NLS specific checks required
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Executing script in InstantiateFile:
/u01/oracle/visdb/9.2.0/appsutil/install/VIS_oracle/afmkinit.sh
script returned:
afmkinit.sh started at Wed Mar 18 10:56:15 EET 2009
The environment settings are as follows ...
ORACLE_HOME : /u01/oracle/visdb/9.2.0
ORACLE_SID : VIS
TWO_TASK :
PATH : /u01/oracle/visdb/9.2.0/Apache/perl/bin:/u01/oracle/visdb/9.2.0/bin:/usr/bin:/usr/sbin:/u01/oracle/visdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/usr/bin:/Stage11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/lib/qt-3.3/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/applmgr/bin
LD_LIBRARY_PATH : /u01/oracle/visdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u01/oracle/visdb/9.2.0/ctx/lib
afmkinit.sh exiting with status 127
.end std out.
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
.end err out.
Skipping INSTE8_PRF
Skipping INSTE8_APPLY
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /u01/oracle/visdb/9.2.0/appsutil/install/VIS_oracle
afmkinit.sh INSTE8_SETUP 127
AutoConfig is exiting with status 1
Executing script in InstantiateFile:
/u01/oracle/visdb/9.2.0/Apache/perl/bin/perl -I /u01/oracle/visdb/9.2.0/Apache/perl/lib/5.00503:/u01/oracle/visdb/9.2.0/Apache/perl/lib/site_perl/5.005:/u01/oracle/visdb/9.2.0/appsutil/perl /u01/oracle/visdb/9.2.0/appsutil/scripts/VIS_oracle/adchknls.pl
script returned:
Validating information needed for NLS........
DATABASE version : db920
No NLS specific checks required
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Executing script in InstantiateFile:
/u01/oracle/visdb/9.2.0/appsutil/install/VIS_oracle/afmkinit.sh
script returned:
afmkinit.sh started at Wed Mar 18 10:56:39 EET 2009
The environment settings are as follows ...
ORACLE_HOME : /u01/oracle/visdb/9.2.0
ORACLE_SID : VIS
TWO_TASK :
PATH : /u01/oracle/visdb/9.2.0/Apache/perl/bin:/u01/oracle/visdb/9.2.0/bin:/usr/bin:/usr/sbin:/u01/oracle/visdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/usr/bin:/Stage11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/lib/qt-3.3/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/applmgr/bin
LD_LIBRARY_PATH : /u01/oracle/visdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u01/oracle/visdb/9.2.0/ctx/lib
afmkinit.sh exiting with status 127
.end std out.
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
.end err out.
Skipping INSTE8_PRF
Skipping INSTE8_APPLY
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /u01/oracle/visdb/9.2.0/appsutil/install/VIS_oracle
afmkinit.sh INSTE8_SETUP 127
AutoConfig is exiting with status 1
instantiate file:
Executing script in InstantiateFile:
/u01/oracle/visdb/9.2.0/Apache/perl/bin/perl -I /u01/oracle/visdb/9.2.0/Apache/perl/lib/5.00503:/u01/oracle/visdb/9.2.0/Apache/perl/lib/site_perl/5.005:/u01/oracle/visdb/9.2.0/appsutil/perl /u01/oracle/visdb/9.2.0/appsutil/scripts/VIS_oracle/adchknls.pl
script returned:
Validating information needed for NLS........
DATABASE version : db920
No NLS specific checks required
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Executing script in InstantiateFile:
/u01/oracle/visdb/9.2.0/appsutil/install/VIS_oracle/afmkinit.sh
script returned:
afmkinit.sh started at Wed Mar 18 11:26:53 EET 2009
The environment settings are as follows ...
ORACLE_HOME : /u01/oracle/visdb/9.2.0
ORACLE_SID : VIS
TWO_TASK :
PATH : /u01/oracle/visdb/9.2.0/Apache/perl/bin:/u01/oracle/visdb/9.2.0/bin:/usr/bin:/usr/sbin:/u01/oracle/visdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/usr/bin:/Stage11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/lib/qt-3.3/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/applmgr/bin
LD_LIBRARY_PATH : /u01/oracle/visdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u01/oracle/visdb/9.2.0/ctx/lib
afmkinit.sh exiting with status 127
.end std out.
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
.end err out.
Skipping INSTE8_PRF
Skipping INSTE8_APPLY
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /u01/oracle/visdb/9.2.0/appsutil/install/VIS_oracle
afmkinit.sh INSTE8_SETUP 127
AutoConfig is exiting with status 1
Executing script in InstantiateFile:
/u01/oracle/visdb/9.2.0/Apache/perl/bin/perl -I /u01/oracle/visdb/9.2.0/Apache/perl/lib/5.00503:/u01/oracle/visdb/9.2.0/Apache/perl/lib/site_perl/5.005:/u01/oracle/visdb/9.2.0/appsutil/perl /u01/oracle/visdb/9.2.0/appsutil/scripts/VIS_oracle/adchknls.pl
script returned:
Validating information needed for NLS........
DATABASE version : db920
No NLS specific checks required
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Executing script in InstantiateFile:
/u01/oracle/visdb/9.2.0/appsutil/install/VIS_oracle/afmkinit.sh
script returned:
afmkinit.sh started at Wed Mar 18 12:25:33 EET 2009
The environment settings are as follows ...
ORACLE_HOME : /u01/oracle/visdb/9.2.0
ORACLE_SID : VIS
TWO_TASK :
PATH : /u01/oracle/visdb/9.2.0/Apache/perl/bin:/u01/oracle/visdb/9.2.0/bin:/usr/bin:/usr/sbin:/u01/oracle/visdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/usr/bin:/Stage11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/lib/qt-3.3/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/applmgr/bin
LD_LIBRARY_PATH : /u01/oracle/visdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u01/oracle/visdb/9.2.0/ctx/lib
afmkinit.sh exiting with status 127
.end std out.
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
.end err out.
Skipping INSTE8_PRF
Skipping INSTE8_APPLY
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /u01/oracle/visdb/9.2.0/appsutil/install/VIS_oracle
afmkinit.sh INSTE8_SETUP 127
AutoConfig is exiting with status 1 -
Error while opening XL reporter
Hi Experts,
I get following error while opening XL Reporter
Error! Server communication failed!
Cause: Error! Unable to get document!
Type: 36
Cause:XML document must have to top level element.
Tried it on several clients, Win XP, Win 7 but can not open XL Reporter
SAP Install is PL47 2007A
Any suggestions??
Gr, MarkTo get SAP repoter in windows 7
1)
XLR: "Report Initialize", (Error (666)), Automation Error
u2022 Error Messages
u2022 Reporting
u2022 XL Reporter
After installing XL Reporter, you may encounter these error messages when attempting to run a report from the SBO menu.
The following error messages occur because XL Reporter does not support .Net 2.0. More than likely you have installed .Net 2.0 for some other software and it is interfering with the execution of the XL Reporter program. SAP indicates that if you copy a certain file to the Excel Folder under your program files, it will correct the problem. Basically the file instructs the system to use .Net 1.1 instead of 2.0.
The SAP Service Note 918188 (SAP "S" number required) states that a file needs to be added to the root of the Excel folder. This folder is normally found under: C:\Program Files\Microsoft Office\
in a folder called something like EXCEL 10 or Excel 11. I am running two versions of Excel so I had to put the following file under the the following directory: C:\Program Files\Microsoft Office\Excel2003\OFFICE11
If you have access to the service site, then access the note mentioned above, and download the file. Otherwise, you will need to create your own.
Modify the file called "excel.exe.config" lines with the following contents:
supportedRuntime version="v1.1.4322"
supportedRuntime version="v1.0.3705"
requiredRuntime version="v1.0.3705"
2)
Regedit for the excel add-on
3)
Missing file - MetaInfo.xml (In SAP addon folder) -
Installation error while installing SAP NetWeaver ABAP Trial Verion 7.02
Hello,
I am getting the following installation error while installing SAP NetWeaver ABAP Trial Version 7.02 (90 days evaluation)
An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :The database installer reported an error. DIAGNOSIS: Some database applications might still be running. SOLUTION: Check the log file sdbinst.log and C:\sapdb\data\wrk\MaxDBRuntimeForSAPAS_install_ _ .log.). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL.
Below are the details of my system:
OS: Windows 7 Enterprise Edition (version 6.1.7600)
Processor: Intel(R) Core(TM) i5
System: 64-bit Operating System
Regards,
Tarunhello,
I am getting the below error while intsatlling
An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :Creating node $(DIR_TRANS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed: Unable to create node
cyber7be\sapmnt\ with type DIRECTORY: can't create parent node...). You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/.
os--windows xp-sp3. 32 bit
please help
thanks in advance
Edited by: sumzi_ks on Aug 27, 2011 4:09 AM -
Error while installing SAP Netweaver 7.1 CE Java Trial - MaxDB problem
Hi All,
I am getting following error while installing SAP Netweaver 7.1 CE Java Trial.
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n psi-001 -d CE1 -u CONTROL,******** db_state
Execute Session Command : exit
> Subprocess stops at 20080509161037
> Subprocess call failed
ERR
-24961,ERR_STATE: The operational state of the database instance could not be determined
-24994,ERR_RTE: Runtime environment error
no_id_provided_by_rte,no_text_provided_by_rte
> Subprocess starts at 20080509164614
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n psi-001 -d CE1 -u CONTROL,******** db_start
Execute Session Command : exit
> Subprocess stops at 20080509164614
> Subprocess call failed
ERR
-24783,ERR_WRONGDBSTATE: Operational state UNDEFINED of the database instance is unsuitable.
-24782,ERR_DBSTATENEEDED1: Database instance must be in operational state OFFLINE.
> Subprocess starts at 20080509164943
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n psi-001 -d CE1 -u CONTROL,******** db_start
Execute Session Command : exit
> Subprocess stops at 20080509164944
> Subprocess call failed
ERR
-24783,ERR_WRONGDBSTATE: Operational state UNDEFINED of the database instance is unsuitable.
-24782,ERR_DBSTATENEEDED1: Database instance must be in operational state OFFLINE.
Thanks,
AlpeshHello Alpesh,
Please see the thread Max-DB cannot determine current db state (NW2004s install)
were the same issue was reported.
Thank you & best regards, Natalia Khlopina -
Error while install DB instance using SAPinst
Hi,
I have the following error while installing High Availability Database instance
with option system copy-> restore from offline backup.
We are at env. Window server 2003, MS SQL serevr 2005 SP 3.
Can anybody help? thanks.
ERROR 2009-02-11 14:45:45
FCO-00011 The step dGetSchemas with step key |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaInfo|ind|ind|ind|ind|0|0|dGetSchemas was executed with status ERROR .
Regards
ChinLine 94, 97 and 100 appear to not have spaces at the beginning of each string, which could cause some issues:
#set reporting to off
$command += ('/SQMREPORTING="0"')
#Add Browser Account
$command +=('/BROWSERSVCSTARTUPTYPE="Disabled"')
#Add Backup path
$command +=('/SQLBACKUPDIR="{0}"' -f $backuppath)
Probably should be this:
#set reporting to off
$command += (' /SQMREPORTING="0"')
#Add Browser Account
$command +=(' /BROWSERSVCSTARTUPTYPE="Disabled"')
#Add Backup path
$command +=(' /SQLBACKUPDIR="{0}"' -f $backuppath)
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book
Maybe you are looking for
-
Issues with calendar invites from Outlook address that come to my gmail on iPhone
I have been trying for HOURS to get to the bottom of this iPhone calendar invite problem I'm having. I'll try to summarize. I LOVE iCal and I want to continue using it. Though I have a personal mid-2010 Macbook Pro, I don't use it too much (my compan
-
HT2513 how to you do two advents at the same time
when i try to do two one dissapears.
-
Hi Experts, I have developed SOAPu2014> RFC scenario synchronous and I have used sender side SOAP adapter receiver side RFC adapter, it is working fine. But I am thinking to go with best design, I know if I replace RFC adapter with ABAP Proxy, perfor
-
Problems with Auto Complete in v31.4.0
Since upgrading to version 31.4.0, the auto-complete for the address field has not worked properly. The delay between address selection is much longer than in previous versions. In past versions I could usually type the first two characters and then
-
Linksys SPA841 not linking to Linksys SPA9000
Why is it that my Linksys SPA841 is not linking to the SIP proxy of my Linksys SPA9000 when everything is connected though I have Linksys SPA941 that works properly when connected to the Linksys SPA9000.