Error while integarting the DAC with the Informatica Integration services

Hi Experts,
I am setting up the BI APPS. I am following the documentation provided by oracle. Everything went on smoothly but when when I am trying to integrate the DAC with the Integration service created in informatica it is giving me the following error:
Informatica(r) PMCMD, version [8.6.0 HotFix4], build [272.1017], Windows 32-bit
Copyright (c) Informatica Corporation 1994 - 2008
All Rights Reserved.
Invoked at Mon Jun 01 14:10:47 2009
[DOM_10033] [DOM_10033] Service [10.136.51.183] does not exist in domain [Domain_ZZDAP2FLM951].
ERROR: Cannot connect to Integration Service [10.136.51.183].
Completed at Mon Jun 01 14:10:48 2009
=====================================
ERROR OUTPUT
=====================================
Important Obeservation: When I am trying to connect the repository service from DAC it is connecting successfully.
Can anyone please provide me the solution for this. It is really urgent.
Thanks in advance.
Satyabrat

Here is what you need to do... there are some gaps in the documentation for 7.9.6 with infa 8.6:
1) In infa 8.6 there is no repository and informatica server, instead you have repository service and integration service
2) make sure you note down the name of the repository service and integration service when you do the post install of the informatica install
3) when you try to register Infa repository in DAC, make sure you use the (hostname/services) as the name of the infa integration service,
and in repostory name use the name of the repository service and not Oracle_BI_DW_base....
if you still have errors upload or email ([email protected]) the DAC config screens

Similar Messages

Error while using sybase trigger with the CMP entity bean,ejb version 2.1

Hi All,
I am using ejb version 2.1 and using entity bean (Transaction required) ,i am trying to update data in sybase(ver 12.3) database table
I am using session bean(Transaction required) to update the multiple entity beans in a while loop.It is working fine .But when i am trying to run it with the trigger which updates multiple tables in different sybase databases on update of each entity.Then it throws NoSuchEntityException and it rollback the whole transaction.
My trigger has only few simple update statements and the trigger runs fine without my CMP entity bean.is the CMP does not support the update triggers in sybase or is it the problem with the transaction.
Please help
Thanks
Anshu

If you can have a look at a cmp example in the samples that ship with the server. My guess is that the weblogic-ejb-jar.xml file is missing the <persistence-use> element which for 810 would look like:
<persistence>
<persistence-use>
<type-identifier>WebLogic_CMP_RDBMS</type-identifier>
<type-version>7.0</type-version>
<type-storage>META-INF/weblogic-cmp-rdbms-jar.xml</type-storage>
</persistence-use>
</persistence>
I seem to recall that the elements might be slightly different in structure for the wls700 version of the DTD, so please check that (I cannot, I'm at home and don't have everything here).
Give that a try and see if it doesn't solve your compilation failure.
Also, the compilation should not be throwing a null pointer exception in a case like that, I consider that to be a bug.
-thorick

I keep getting "iCloud encountered an error while trying to connect with the server" - ideas?

I'm on my PC at work and cannot access anything - my calendar, reminders or contacts. The apple support website doesn't show any outages - any ideas?

Your Mac must be on Lion (10.7) to run iCloud. Apple had to change the operating system to fully support it. Nevertheless, it is possible to get emails from iCloud without having Lion. Please tell me if this interests you.
Anyways, here is the link to buy Lion (30 dollars, totally worth the upgrade ): http://itunes.apple.com/be/app/os-x-lion/id444303913?mt=12
Franklin

A network error occurred while trying to communicate with the server.

Hello All,
I am getting some new error messages when opening the server app on my Mac Mini server running OS X 10.8.2 and Server 2.2.1. First I get a message that says "A network error occurred while trying to communicate with the server." and then after trying to open some of the service panes, I get additional errors that say "Multiple errors occurred on the server while processing commands." The services don't load and I just see "Error Reading Settings" in the server app.
I started to get these errors when I added a new website to the server. All the services are working fine but I cannot access them in the server app.
In console I'm seeing these errors when I try to access various services:
2/24/13 8:02:12.692 PM Server[956]: Error: The server '10.0.1.150' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_dns'. Error: Error Domain=XSActionErrorDomain Code=499 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c4003a760 {NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., originalError=Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c3f547db0 {NSURLErrorFailingURLPeerTrustErrorKey=<SecTrust 0x7f8c40599080 [0x7fff7711ffd0]>, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSUnderlyingError=0x7f8c3d58c0b0 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk.", NSErrorPeerCertificateChainKey=(
"<SecCertificate 0x7f8c3f6747e0 [0x7fff7711ffd0]>"
), NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., NSErrorFailingURLKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorFailingURLStringKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorClientCertificateStateKey=0}}
I have already restarted the server and used terminal to stop and start postgres. Any more thoughts on how to repair this?

Just as I had suspected, the whole GUI crashed because of certificate problems. After two and a half hours with enterprise support, it turns out the com.apple.servermgrd certificate in the server keychain had become corrupt.
We determined this by typing https://127.0.0.1:311 into Safari and we could see all the server modules and interact with them through the web interface. All the services were working properly as well so we knew that it was just the Server.app GUI that simply couldn't read settings that was causing the problem.
So, first we closed the server app. Went into /var/servermgrd and deleted all the files from this folder. Then, in Keychain, deleted the com.apple.servermgrd certificate. Did a search for com.apple.servermgrd in Keychain and deleted everything else that came up for it.
Then restarted the server. Now the server app was able to properly connect to the services in the background and read them properly. This was the jist of the troubleshooting that solved the problem. It also seems like DNS is causing problems because that is the only service that will not read right but is functioning properly in the background.
I will post an update once Apple figures out what is wrong with DNS. Hope this helps anybody else having these problems.

An error occurred while trying to communicate with the web browser.

I have opened a PDF in the Acrobat reader V 8.2.4. It has live links.
Only the FF browser is open.
When I click a link in the PDF, I successfully get the message 'The document is trying to connect to...' which I allow and then successfully hyperlink to the web page displayed in FF.
When I click an image in the PDF, which has a url attached to it, I get the message 'An error occurred while trying to communicate with the web browser.'
[Sorry to say in IE7 when I click the image, I hyperlink to the web page like I do when I click the link.]
Question is: What setting or other step do I need to take with FF so when I click the image in the PDF I link to a web page like I do when I click the link in the PDF?
Thank you!

Your above posted system details show outdated plugin(s) with known security and stability risks.
# Adobe Shockwave for Director Netscape plug-in, version 10.2
# Adobe PDF Plug-In For Firefox and Netscape 8.2.4
# Shockwave Flash 10.0 r22
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Adobe Reader]] plugin to the latest version.
*http://get.adobe.com/reader/otherversions/

On my Mac Mini, I keep getting this error message: "iCloud encountered an error while trying to connect to the server". I don't have any problems with iCloud on my laptop / PC. It works fine... Does anyone know what the problem could be?

On my Mac Mini, I keep getting this error message: "iCloud encountered an error while trying to connect to the server". I don't have any problems with iCloud on my laptop / PC. It works fine... Does anyone know what the problem could be?

Your Mac must be on Lion (10.7) to run iCloud. Apple had to change the operating system to fully support it. Nevertheless, it is possible to get emails from iCloud without having Lion. Please tell me if this interests you.
Anyways, here is the link to buy Lion (30 dollars, totally worth the upgrade ): http://itunes.apple.com/be/app/os-x-lion/id444303913?mt=12
Franklin

An error occurred while attempting to communicate with the AirPort Express

I have an Airport Base Station (ABS) and 2 Airport Express (AES) units spread through my apartment connected in a WDS network. The ABS was using version 5.5.1 and the Express units were using 6.1.1 because I had read these versions had less problems disconnecting. But yesterday, while changing the access list in the different stations, both of my AES came back with an error that read 'An error occurred while attempting to communicate with the AirPort Express'. No resets or firmware updates would restore them to a working state from a MacBook Pro 2.4 GHz where I had the latest Airport Utility. There was always a communication error.
I was able to update the units using an old PowerBook G4 running at 500MHz with the old Airport Setup Assistant. Both AES units were updated to version 6.3 and were put back in the WDS. Airport Setup Assistant has trouble communicating with the Airport Card in the MacBook Pro 2.4. I hope this helps others get their AES working again.
Message was edited by: Merbil Gonzalez

Thank you! That was helpful. I guess I'm lucky that I have an old ibook to use.
Does Apple know about this issue???

TS3988 I get a "Connection Error - iCloud encountered an error while trying to connect to the server" message; I have been getting this error message for months, on any device I try to login with.

I get a "Connection Error - iCloud encountered an error while trying to connect to the server" message; I have been getting this error message for months, on any device I try to login with.

Hi
I am sorry can't help you because I have same problem when login to icloude.com and try insert to Contacts!
Many times happen.
what is issues ?

[Solved] There is a yellow triangle at the bottom of the screen with the message "error while signing in"

Firefox Sync has been working fine between my home computer, work computer and my Android phone but suddenly my home computer has recently stopped syncing. There is a yellow triangle at the bottom of the screen with the message "error while signing in". I have checked passwords and codes on all three devices and check the sync versions are the same. All where correct. I have reinstalled both firefox and sync. I have even tried setting up a new sync account with a different user name but still the same problem. My work computer and phone sync fine but my home computer gets the error. Does anyone have any idea what could be causing this. Any help would be greatly appreciated as this is driving me mad!

I have now discovered that if I manually disconnect (Tools / Sync / Disconnect) and then sync it works but only once. I seem to be able to repeat this manual process indefinitely. I thought that this might give a better mind than mine a clue.

Error while binding the model with the custom controller

Hi All,
I first started with a dummy project and in that binded the model with the custom controller.
For some reason, I deleted the project and created a new one. I have deleted the whole project from the workspace.
Now, when I am trying to bind the model again , I am getting an error when selecting the response parameters saying that DUPICATE ENTRIES.Ideally it should not happen when I am deleting it completely.
I am using a Webservice Model. Can any one help me out to resolve the same.
Looking forward for your response.
Regards
Dipendra

Hi Raman,
I did that and even I have Installed the IDE again.
Still I have that error.
Regards
Dipendra

Access denied error while writing a file to the file system - myfileupload.saveas() throws system.unauthorizedexception

hi,
as part of my requirement , i have to perform read and write operations of few files [ using the file upload control in my custom visual web part] and on submit button click.
but while writing these files - with the help of fileupload control - and when i use myfileupload.saveas(mylocation);
- i am saving these files into my D:\ drive of my server , where i am executing my code -, am getting access denied error.
it throws system.unauthorizedexception.
i have given full control on that folder where i was trying to store my attached files. and also after following asp.net forums,
i have added iusr group added and performed all those steps such that, the file is saved in my D:\ drive.
but unfortunately that didnt happen.
also
a) i am trying the code with runwithelevatedprivileges(delegate() ) code
b) shared the drive within the d :drive where i want o save the files.
c) given the full privieleges for the app pool identity- in my case , its
network service.
the other strange thing is that, the same code works perfectly in other machine, where the same sp, vs 2012 etc were installed .
would like to know, any other changes/ steps i need to make it on this server, where i am getting the error.
help is appreciated!

vishnuS1984 wrote:
Hi Friends,
I have gone through scores of examples and i am failing to understand the right thing to be done to copy a file from one directory to another. Here is my class...So let's see... C:\GetMe1 is a directory on your machine, right? And this is what you are doing with that directory:
public static void copyFiles(File src, File dest) throws IOException
// dest is a 'File' object but represents the C:\GetMe1 directory, right?
fout = new FileOutputStream (dest);If it's a directory, where in your code are you appending the source file name to the path, before trying to open an output stream on it? You're not.
BTW, this is awful:
catch (IOException e)
IOException wrapper = new IOException("copyFiles: Unable to copy file: " +
src.getAbsolutePath() + "to" + dest.getAbsolutePath()+".");
wrapper.initCause(e);
wrapper.setStackTrace(e.getStackTrace());
throw wrapper;
}1) You're hiding the original IOException and replacing it with your own? For what good purpose?
2) Even if you had a good reason to do that, this would be simpler and better:
throw new IOException("your custom message goes here", e);
rather than explicitly invokign initCause and setStackTrace. Yuck!

Error while deleting a row from the Entity Object

Hi OAF Guys,
i am unable to delete the newly created row from the entity object.
let me explain my scenario.
1. i have a table of which some of the columns are mandatory.
2. I am writing the code in the validateEntity to check wether the user really enter anything into the fields.
3. My problem is, when the user creates row and wanted to delete the row without entering any details, the validate entity of the EO gets fired which will not allows to delete the row.
Is there any workaround for this problem.
Regards,
Nagesh Manda.

Hi Tapash,
I am very sorry for not providing you the complete details of my scenario. Here i am explaining
1. what code you have placed while creating the row and in validation method on EOImpl.
while creating a new row i am initializing the primary key of the EO with the sequence value.
2.When you say, you are unable to delete the row, are you getting a error message ? if yes, custom message or fwk error ?
its not the fwk error, its the custom message which wrote in my validateEntity method of EO to check whether the user had entered all the necesary columns or not.
3.How are you trying to delete the row ?
while the user clicks on the delete switcher i am getting the primary key of the row and searching for the row in the vo and finally deleting it.
The problem arises when the user creates a row, and later doesnt want to enter the details and delete it. Here while deleting the row the validateEntity method of the EO gets fired and doesnt allow me to do so :(.
Any way appreciate your help tapash.
Regards,
Nagesh Manda.

Trying to setup new iCloud in system preferences and get error message: "iCloud encountered an error while trying to connect to the server."

Here's the sequence of events:
Setting up a new iMac.
Migration Assistant was aborted during setup and a normal setup was completed.
Then ran Migration Assistant from the newly setup account.
It ran fine, but put all the data in a new account called "user".
Renamed "user" to a new name, renamed the home folder to a new name following these instructions: OS X: How to change your account name or home directory name
Delete the account we originally created, so just have one account with the name we want and all the data, email. Works fine.
Sign into the App Store with the account we share for purchases.
Now, the problem:
Go to System Preferences to setup iCloud with a new Apple ID
Get this error: "iCloud encountered an error while trying to connect to the server."
So I'm unable to setup iCloud for photo stream, FaceTime, etc.
Internet works fine, we can get mail, etc.
Rebooting doesn't help
Ideas?

never mind the problem is gone this morning.

Dump error while creating or double click the info package

Hello experts,
I have actived infocube 0FIAR_C03 in BI content. Ago, The creation infopackage have been deleted in the past , today, I created a infopackage, while I update mode selected u2018initialize delta processu2019, then click save button , the system prompt u2018Deltas already loaded for request REQU_D64R47LDUSZHY9CBIB86WMLFJ init.selection; no 2. initu2019, I canoti save it for my setting. Why is this?
Then I have search cause in SDN, and I have reference OSS Note 852443 to do .
Note 852443 have mention some table: RSSELDONE、RSSDLINIT、RSSDLINITSEL、ROOSPRMSC、ROOSPRMSF.
I have to delete that request of record using se16 in these tables: RSSELDONE、RSSDLINIT、RSSDLINITSEL.
in my BI 7.0 system, ROOSPRMSC、ROOSPRMSF is no any data.
I was no found delta queue in RSA7.
Now . Dump error while creating or double click the info package, how can I change this?
Please let me know the solution.
Thanks for your help.
Best Regards
Steve

Here are some links which deals with same issue.
Re: Dump In Infopackage
Re: Getting into Short dump at the time of selecting InfoPackage to execute for
Short dump while performing init in infopackage
Re: Infopackage going into short dump
Thanks.

There was an error while writing data back to the server: Failed to commit objects to server : Duplicate object name in the same folder.

Post Author: dmface15
CA Forum: Administration
I am working in a new enviorment and i am trying to save a report to the Crystal Server via the CMC. I am uploading the report from the objects tab and attempting to save to a folder. The report has 1 static defined parameter and that's it. When i click submit to save the report i receive the following error message: "There was an error while writing data back to the server: Failed to commit objects to server : Duplicate object name in the same folder." There is not a anothe report within the folder with that name. What could be causing this error message and equally important, what is the solution.

hte message you received about duplicate user probably means something hadn't fully updated yet. Once it did then it worked...
Regards,
Tim

Error while integarting the DAC with the Informatica Integration services

Similar Messages

Maybe you are looking for