Error while integrating BEx Query with Cognos
Hi all,
we have made 999 rows and 150 columns..
but we r unable to integrate it with cognos if we remove free characteristics....
and it thows me the following error
1.BAP-ERR-0002 a BAPI error has occured in the function module RFC_READ_TABLE. NOT_AUTHORIZED
2.error when generating data provider
3.Query is too large
Please do reply immediately with the correct solution
Regards
Madhavi
Hi Vani Reddy
Jus one quick finding are there any new patches upgrade taken place in your system . its in generally occurs because patch issues please refer the following note 1325527.
it may helps you in this reg.
Hope its clear a little..!
Thanks
K M R
***Even if you have nothing, you can get anything.
But your attitude & approach should be positive..!****
>
vani reddy wrote:
> Hi All,
>
> While executing Bex Query user is getting below error message after 20 mins and coming out of BEx.
>
>
>
> Error Group
>
> RFC_ERROR_SYSTEM_FAILURE
>
> Message
>
> An exception that could not be cought occured.
>
> Thanks in advance
> Vani
Edited by: K M R on Aug 12, 2009 2:14 PM
Similar Messages
-
Getting Error while integrating Crystal reports with Java
Hi All,
I am getting below error while integrating crystal report with java
[java] os.arch = x86
[java] java.lang.NoSuchMethodError: com.crystaldecisions.Utilities.d.<init>
(Ljava/awt/Image;I)V
[java] at com.crystaldecisions.Utilities.af.try(Unknown Source)
[java] at com.crystaldecisions.Utilities.af.a(Unknown Source)
[java] at com.crystaldecisions.Utilities.af.<init>(Unknown Source)
[java] at com.businessobjects.crystalreports.viewer.applet.g.a(Unknown
Source)
[java] at com.crystaldecisions.ReportViewer.ReportViewer.start(Unknown
Source)
[java] at ReportViewerFrame.<init>(ReportViewerFrame.java:51)
[java] at JRCViewReport.launchApplication(JRCViewReport.java:29)
[java] at JRCViewReport$1.run(JRCViewReport.java:50)
[java] at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:
178)
[java] at java.awt.EventQueue.dispatchEvent(EventQueue.java:443)
[java] at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDi
spatchThread.java:190)
[java] at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDisp
atchThread.java:144)
[java] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.j
ava:138)
[java] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.j
ava:130)
[java] at java.awt.EventDispatchThread.run(EventDispatchThread.java:98)
Any help can be appreciated
KalyanHi All,
For got to mention i am using crystal reports XI release 2 with JDK1.4.
Kalyan -
Error while executing BEX query via FM
Hi Friends,
I am getting following error while executing a query via FM RRW3_GET_QUERY_VIEW_DATA.
Please see the error screenshot as follows.
the I_T_PARAMETERS entered are as follows.
Please let me know what is missing.
Thanks.
Regards,
Hrishikeshthe key date variable 0DAT is normally filled by a SAP exit variable, but this may not be the case. it could have been changed in the query designer, check the query in query designer and see.
Try passing 0DAT in the variable list with todays date -
Internal Error while executing a query with varaints in BEX
HI All,
I am executing a query which has 4 variants. when I use the first 3 variants the query is working fine.....but when I try to execute the same query for the 4th variant....the system is giving an error message called Internal Error.....
when I executed the same query with same variant...in RSRT transaction code...I was able to see the results....
The error messages that I am getting as follows...
<Internal Error> receiving from the BW Server Failed. BW server raised exception SYSTEM_FAILURE. DO you want to see more information...
when I selected YES....I got the following message
Error in a ABAP statement when processing an Internal Table.table.
Error Group
RFC_ERROR_SYSTEM_FAILURE
when clicked on the OK button the following message is displayed....
<Internal Error> Can not determine text elements for the current query.
Can any one explain me what went wrong...is there any thing that I need to do in the BEX settings...are there any patches that needs to be installed...or any OSS notes available for this sort of errors...?
Advance in thanks
Dilse...
HashHi Harish,
Execute the query in RSRT and check whether you have any short dump is in ST22. This would give a clear idea at what might have gone wrong.
Another thing is to check whether the code for the variable is fine in the user exit.
Hope this helps.
Bye
Dinesh -
Error while executing BEx Query on Composite Provider
Hi,
We have a BW on-HANA system, patch level SAPKW73105.
We have created a Composite provider based on the union of two DSOs, two infoobjects, one SPO, and there are a couple of joins with two other DSOs, on the top of that we built a BEx query.
While executing the BEx query, sometimes (depending on the filter values), We got the following error message
"Attribute engine failed;Error executing physical plan: exception 6900: AttributeEngine/Parallel/DimensionFilter.cpp engine failed; $function$=getValidFemsPA;"
"Error 6,900 has occurred in the BWA/SAP HANA server"
"Error reading the data of InfoProvider @3ZSDRPCP5"
"Error while reading data; navigation is possible"
"Row: 59 Inc: MAP_TREX_EXCEPTION Prog: CL_RSDRH_TREX_STORAGE"
(Attached error message)
Ii We browse the composite provider data using the "display data" option in the RSA1, data is displayed without issue, the problem only appears during the BEx query execution and only with some filter vaues.
Any idea on how to fix the issue.
Thanks,
FedericoHe's on 7.3 EhP1, which is on SPS12 today. It got pretty stable by SP08, SP09. SP05 was pretty early on, and had a lot of bugs in the HANA views.
7.4 is on SP07 like you say, and most of our customers run at least SP06 - before then, you had to apply a bucketload of SAP notes. I would recommend customers apply SP08 with care because it's a feature release so will have a bunch of new features, which will no doubt need corrections. -
Error while executing Bex Query
Hi all,
i am getting error while executing the Bex Query.i am able to change and save the Query without any issues.
Error:
<internal error> Receiving from the BW server failed.BW server raised exception:SYSTEM_FAILURE
Do you want to see more information?
YES--->Syntax error in Program SAPLY05BW_ISA
Details:
Error Group
RFC_ERROR_SYSTEM_FAILURE
Message
Syntax error in program SAPLY05BW_ISA
What could be the problem?pl help me out!
ThanksHi,
Try this:
Execute the report RSFTP005 in BIW.
With rgds,
Anil Kumar Sharma .P -
Giving Error while opening BEx Query Designer.
Hi all,
A user is trying to open BEx Query Designer 7.0 and she is getting this error
" SAP BEx Query Designer standalone has encountered a problem and needs to close. We are sorry for the inconvenience.
If you were middle of something, the information you are working on might be lost. "
She is not having issues while opening BEx Analyzer. She is having Office 2010. This doesn't seem to be compatibility issue with the Office. This BEx was not installed on her machine 2 weeks back and it was working fine until now.
As a first re-solution i told her to get it re-installed but still she is getting the same issue.
Thanx.Hello,
There is no relation between Office VS Query Designer. Only with BEx Analyzer and MS Excel.
My suggestion is.
If you don't have version 7.20 of SAPGUI and Business Explorer, please download the installer.
After that, download the latest patch available and install:
http://service.sap.com/swdc
> Support Packages and Patches
> Browse our Download Catalog
> SAP Frontend Components
> SAP GUI FOR WINDOWS
> SAP GUI FOR WINDOWS 7.20 CORE
> Win32
_ > * gui720_5-10007878.exe
| > BI ADDON FOR SAP GUI
| > BI 7.0 ADDON FOR SAP GUI 7.20
|_ > * bi720sp03p_301-20006596.exe
|
| > BI ADDON FOR SAP GUI
| > BW 3.5 ADDON FOR SAP GUI 7.20
| > Win32
|_ > bw350gui720_5-20006857.exe
If persist, let me know.
Cheers
Edward John -
ERROR while excecuting BEx query
Hi Friends,
I executed a Bex query and error is displayed Page not Found while connecting.I am using a Remote desktop.
Can you please let me know how can i correct the error.
Appreciate your help
Thanks
SahasraHi Sahasra,
Can you provide more details about your issue. At the same time you can check the following points.
1. When you are executing the query, does it ask for your SAP user ID and password.
2. You can check the link on your webpage, whether its referring to the correct query. Query name will be there on URL.
3. There could be a connection issue, check with you basis team.
Thanks,
Sachin -
Error while executing BEx query made on Multiprovider having Virtual cube
Hi All,
We are getting an error message while executing a BEX query made on Multiprovide which consist of a Virtual Infocube infocube which extracts data from APO Live Cache, the error which we get is as below
''Error Reading the data of the infoprovider ZSS_R054
Error in Substep
Errors have occured while extracting data from datasource 9A_E2E_FC2
Errors occured during parallel processing of query 4, RC:3
Error while reading data; navigation is possible''
And also when tried to execute from RSRT , it gets executed in debug mode in TRY and CATCHE
Please let us know if anyone faced a similar situation or can suggest me what to do.
Please suggest.
Thanking you in advance.
regards,
ajayHi Ajay,
Try RSRV transaction, Select All Elementary Tests, Select query, now drag both these items on the right hand pane, select your query from this popup. and execute.
Let us know what the result is.
regards,
Sree. -
Getting Java error while connect BEx query to WebI report (SAP BI4.0 )
Not able to connect BEx query to WebI report (SAP BI4.0 ) . Below is the error I get while creating a new BEx connection to BOBJ WebI report .
Please find the below error and help me ,
"Select a BW Bex query window box " displayed "Nothing to display " and server error as mentioned below
Java.uti.concurrent.executionException: Com.sap.sl.sdk.repository.service.repositor******
at Java.uti.concurrent.futuretask (Unknown source )
at java.swing.swing.timer.fireactionperformed(Unknown source )
at java.awt.event.invocationEvent.dispatch(Unknown Source)
Thanks ,
Pradeep GorpaduHi,
I am on BO 4.0 SP05 Patch 6. Webi reports are just showing processing but not giving results. When I try to create new report it is throwing java security error.
Tried applet patch upgrade(From link : https://websmp207.sap-ag.de/~sapidb/011000358700000902752013E) for webi certificate but didn't help.
Please suggest what could be done.
Thanks and Regards,
Ankit Sharma -
Hi Mates,
Throught webi if i try to connect to a bex query im getting the attached error message, any idea what to do..
2 days back im able to connect to bex query frm webi..frm yesterday its not happening
regards,
mahihi Ray,
Bex query is checked , and pwd is also fine, but i think java need to be updated in my pc
and im getting the below errrors while opening webi in BI launch pad.........any idea -
While saving Bex query with Technical name, it says Query already existing
Hi,
I am facing a problem. While saving a query withy its technical name (for example ZQYZMPR_01), it says that query is already existing. But when I search for the query in all tabs like Favourites, Roles, Infoprovider It is not found.
I also checked a view V_REP_JOIN. In this view I find Query (ZQYZMPR_01) in MODIFIED version.
I want to use my previous query instead of creating new one.
Suggest, how can I retrieve my previous query that I am unable to search for.Saurabh
Searching with descriptions may lead to confusion as there may be similar descriptions to a query but just one technical name. Check the query 'where used list' you may find answers.
Can you check the query in RSZCOMPDIR ? If the query exist here, it must be there in the system. Do the search with exact technical name ZQYZMPR_01 or ZQYZMPR*, you should be able to find. Do not search in specific areas like roles etc..search directly by inputting the tech. name.
Ferdinando - you can delete the query in RSZDELETE transaction. While doing so, it will prompt for removal from all areas like roles, workbooks etc. Say 'yes' and delete, you will be able to assign the technical name to another query.
Ramesh -
hi all,
While i try to execute a query i am getting the below error msg. How to rectify it. Can i suppress the message and execute the query. I want to look at the keyfigure/characters used in the query how to look at it.
Warning following error for partial infocube = zsbmt in rsdrc_cube_data_get_rfc
error ods zsbmt not configured for bex reporting
abort system error : rsrdc/form data_get_ods error in rsdro_read_ods_dat zsbm
abort system error in program saplrsdrc and form rsdrc/form data_get_ods.
thanxs
harithaHi,
it looks like the ods, you are running the query on is not enabled for bex reporting. So goto the ods maintenance and switch on bex reporting in the settings of the ods.
regards
Siggi
PS: someone removed the flag after the query was created. -
Java.lang error while Integrating R12 EBS with 10g AS
hi
I am integrating Oracle E-Business Suite Release 12 with 10g AS following metalink document 376811.1
While applying patch 5983637 (refer 'Pre-Install Task 4' in metalink doc) I got the error
java.lang.ArrayIndexOutOfBoundsException:0
Before applying I brought down 10gAS middletier services & Infra tier opmn services. Only Infra tier listener & database are up.Is this right?
Kindly help
Thanks
JILDid you ever get an answer to this... I am facing this problem right now
Kathy -
Hi all
I created a Global RKF in Query desinger and when i click on Save button, it is throwing error
[Query name] contains errors do you want to save anyway?
why i am not able to create RKF, If i delete that RKF and click SAVE its working fine, but if I create a Global RKF it's throwing error.
What i Did is I select the option No, and tried to create again the same RKF with same Technical name then it says already RKF exists but i dont see that in any other query's too, then i logout and once again login and tried with same technical name and same RKF then it worked but for only one RKF, when i create another RKF and save query same error is showing up.
Did any one face this issue before?
ThanksIn SAP we can't create any of the objects with the same Technical name, but you can create the objects with same description with different Technical names...
You might have checked the Description which is same for the other RKF you are referring too...
Why you want to create the RKF with the same name? why don't you make use of already existing one?
If you are not able to find it ,,some body might have created and later they had deleted it. but the entry is still there in the tables.
Give a try and check out your self...
Maybe you are looking for
-
Invoice verification - reg.
While doing invoice verification with respect to po no. it adopts the goods received data as per the goods receipt and its document no. In some cases it is observed that two or more documents data is displayed in one line item. Why it is happening?
-
hi, I am getting following error in MIRO transaction ....Can anybody please fix this ? "In company code 3000, the number range 51 is missing for the year 2008" Regards Vijay
-
Need help positioning flash photo gallery partially behind graphic.
I have created the basic photoshop layout that I will now be assembling in Dreamweaver. I wish to create a 4 or 5 image gallery using LightBox 2 that will rotate images within the header graphic. Image attached. How would I accomplish this code wis
-
I cant "drag and drop" music onto my ipod anymore can i get help please???
Hi, Since i have my ipod i have always dragged and dropped music from my itunes library onto my ipod but now every time i open itunes it tries to sync my whole library onto my ipod which i dont want, but now i cant drag nd drop onto it anymore , and
-
Converting Integer to an 8 bit representation
Im looking to this in my program. But not sure how to go about it. Is there any specific function that i can call. Is there any thread i could have a look at?