Error while laoding data from ODS to infocube

Hi all,
I am trying to load data from ODS to Cube but its giving error.
I am getting following error
An error occurred while executing a transformation rule:
The exact error message is:
The argument 'Result dependent booking' cannot be interpreted as a
number
The error was triggered at the following point in the program:
GPD5CD2GMGXQYJ77HKMS0C0CQVE 2510
System Response
     Processing the data record has been terminated.
Procedure
      The following additional information is included in the higher-level
     node of the monitor:
     o   Transformation ID
     o   Data record number of the source record
     o   Number and name of the rule which produced the error
Procedure for System Administration.
How to resolve this error, it will be great help if anyone post the steps

Thanks Ananda for your suggestion,
CAn you please tell me How to identify which rule has a problem ..is there any way which tell me which rule and which record is creating a problem

Similar Messages

Error While Loading data from ODS to Infocube

I am trying to load data from ODS to Infocube thru Update ODS data into data target. My requirement was to take a small subset of fields from ODS and design IC and load the data.
My load fails at Extraction process as I get 0 records from total number of records sent in each package. Please let me know if you need more information.
Please advise.
Thanks,
RR

In Details tab of monitor, in extraction step,
Extraction(messages): Errors occured
Green Light for Data Request Received
Green Light for Data Selection Scheduled
Yellow for 25000 Records sent(0 records received)
Yellow for 25000 Records sent(0 records received)
Yellow for 15000 Records sent(0 records received)
Green Light for Data Selection Ended
Please let me know, If you need more information.
Thanks,
R R

Error While Deleting Data From ODS

Hi all,
We are getting short dump while deleting data from a perticular ODS.
Part of short dump is--
trigger Location of Runtime Error
   Program                                 SAPLRSAC
   Include                                 LRSACU75
   Row                                     535
   Module type                             (FUNCTION)
   Module Name                             RSAR_TRANSTRUCTURE_ACTIVATE
help is desperately required
Regards
Srini--

try to activate InfoSource and later delete data.
Check if all ODS related objects are consistent and active.
also pls attached the whole dump for more clarity if this does not work.

Error while uploading data from ODS to Cube

Hi All,
Will you please help out this issue.As this is a priority high issue,please reply if you know the answers.
I am facing an error while loading the data from ODS to CUBE,the error
is
<b>1.Name is not in the namespace for generated BW Metaobjects
2.Error 18 in the update</b>
And this error is occuring only in quality server.
Thanks,
Ram.

HI RAM SIVA,
make sure that the Data source is replicated and tranfer rules r active.
And also check whether the all transport requests r imported properly.
hope it helps
bhaskar

Error While Loading Data from ODS to ODS

Hi Experts,
When i'm loading the data from ods to further ods, i'm facing an error while activating the data saying that 0ref_doc_no consists of invalid characters.Also it is saying that Error when assigning SID.
I'm unable to see the long text for further information.
Regards,
Vijay

Hi vijay bhaskar,
first go to RSA1 -> go to datasource -> search for the data source with name "8<old DSO>". Go to dispaly and click on PSA button on top. Now you can see PSA data request. in the bottom left you select error records and display. now you will see all the error records. go through each and every records and see what is the special characteristic in that record and copy that special character in notepad. After collecting all the special characters in notepad, goto RSKC -> paste all the special characteristics from note pad. execute it.
Now, go back to PSA, delete the request from PSA. Schedure the infopackage to load the data. Now, will not see any error like special characteristics.
I hope you understood and can handle your issue.
Assign points if it is helpful.
Reagds,
S P.

Error while loading data from DataSource to InfoCube/DSO through DTP

Hi Friends,
I am trying to load data from DataSource to InfoCube/DSO through DTP and getting the following error:
Exception in substep: Extraction completed
Processing terminated
Data package 1 / 30.04.2009 22:38:30 / Status 'Processed with Errors'
When i see the detail message it says:
Syntax error in routine "convert_to_applstru", line 25 of generated program"
I checked all my transformation and looks ok. I was able to load data earlier and i getting this error all of sudden. Does some one know what is this routine "convert_to_applstru" ?
Thanks,
Amit

Hi Arun,
Where do i see this generated program in RSRV. I dont see this in RSRV. Please guide me.
Thanks,
Amit

Error while loading data from ODS to IC.

Hi Experts,
             I am trying to load data from ODS to IC using Initial load. I failed first time. Then when I am trying to schedule it again I am getting a error message. I deleted the intial request. Even after that, I am getting the following message. Am I missing something?
Delete init. request
REQU_BQQCBQV5ZK9YEBB416C8QXXLC before running
init. again with same selection
Also can any one provide me a document that contians the lenght of all teh technames? I know I can find it out by looking into each one of the Tech Names. But I would be nice if anyone of you can provide me a document.
Can anyone of you please help me.
Thanks,
Nandini.

Hi,
By reading the error:
No transfer structure for InfoSource 8ZYNA_ODS and source system B3TCLNT800
I think the problem is actually with a Datamart. You can try to regenerate the export datasource and activate it.
Also, you can try to activate only the transfer structure again using the report "RS_TRANSTRU_ACTIVATE_ALL".
I hope this helps!
Pietro

Error while loading data from ODS to CUBE.

Hi friends,
When l am loading data from ODS to Cube with help of data mart, I am getting error in QA system , IN DM system ,every thing went well.IF i see the detail tab in monitor under Processing .
Its is showing like this .
Transfer Rules : Missing Massage.
Update PSA : missing massage.
Processing end : missing message.
I have checked the coding in update rules, everything is ok.
Plz any inputs.
hari
Message was edited by:
hari reddy

Might means that IDocs flow is not defined properly in your QA system for myself-SourceSystem.
Regards,
Vitaliy

Error while extracting data from ODS using Infospokes - URGENT

Hi all,
I am extracting data from an ODS using infospokes and nothing fancy, no selection criteria but I am getting an error message saying
Syntax error in row3(-> long text) Msg id = "RG" and msgno is 102
Any ideas on how I can see what is the exact error and how to debug this?
thanks
Sabrina.

Hi Sabrina
service.sap.com can help you getting the details of your mesg.
I found one OSS note suitable to your mesg. So just check out OSS note # 671097. I hope this note will be some help to you. If not go and chk in the OSS you can find some more.
Here is the note details also
<i>Symptom
Error message RG102: 'Syntax error in &1, row &2 (-> long text)' appears in the request log of an InfoSpoke.
Reason and Prerequisites
The data source is an ODS object and the extraction mode is 'delta'. The cause of the error message is that the ODS extractor is unable to select the request ID (InfoObject 0REQUID) from the change log of the ODS object. However, the request ID is mistakenly provided in the field list of the ODS object on the InfoSpoke maintenance screen. --
Solution
Delete the 0REQUID InfoObject from the field list of the InfoSpoke and activate the InfoSpoke. As of the patch mentioned below, the request ID in the template tab is no longer provided.
BW 3.0B
Import Support Package 16 for 3.0B (BW3.0B Patch 17 or SAPKW30B16) into your BW system. The Support Package will be available once note 571699 with the short text "SAPBWNews BW 3.0B Support Package 16", which describes this Support Package in more detail, has been released for customers.
BW 3.1 Content
Import Support Package 10 for 3.1 Content (BW3.10 Patch 11 or SAPKW31010) into your BW system. The Support Package will be available once note 571747 with the short text "SAPBWNews BW 3.1 Content Support Package 10" has been released for customers.
To provide information in advance, the notes mentioned above may already be available before the Support Package is released. In this case, however, the short text still contains the words "preliminary version".
Refer to note 110934, which contains information about BW Support Packages.</i>
Regards,
Rohini

"Error While loading data from ODS to Target "

Hi All,
I am loading masterdata from ODS to infoobject as data target, I am getting an error message as
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
DataSource 80BP_ID does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 09.08.2006 10:17:24.
The time stamp in the BW system is 15.03.2006 16:44:34.
But we are getting Data till ODS, when we manually load from ODS to infoobject this error is coming up.
Please help in resolving this,
Thanks,
Sairam.

You are welcome Sairam
The generated objects are export datasources based on the ODS objects. These are automatically generated because ODS objects are a key component to a data model or datawarehouse strategy where their role is to stage the data for consolidation or harmonization purposes. The generated datasource helps you to load data into further data targets. The use of a cube as an export datasource is not as common, and so the datasource is not automatically generated for them.
Hope this helps...

Error while loading data from DSO to Infocube

Hi all,
I'm loading data from flat file to the cube via a DSO. I get an error in the DTP.
The data loads to the DSO, i'm able to see the contents in the active data table.
Transformation from DSO to Cube is activated without any errors. Its a one to one mapping. No routines used.
When i execute the DTP ( i use full load option as it is a one time load) i get the following error in DTP: All of which are Red.
Process Request
Data Package 1: Error during processing
Extract from DSO XXXXX
Processing Terminated
The long text of the error gives the msg: Data package 1: Processed with errors RSBK257
Thanks

Hi,
You can check the below forums.
DTP with error RSBK257
- Jaimin

Error while loading data from DSO to Infocube for 0Fiscvarnt

Hi All,
Could you please help me any one to resolve the below error.
*"Fixed value discrepancy with InfoObject 0FISCVARNT value 'K4 ', expected 'K2 " (MessageClass RSAU).
We have two Staging DSO's upto Second level DSO FiscalyearVariant both K2 and K4 updating, but second level DSO to infocube data loading we had a above problem. all are direct mapping, no routiunes or constants at all transformation level.
But we checked R/3 side both K2 and K4 variants are available.
Thanks,
Ramesh

Hi,
It's a constant issue I met before. I guess you have assigned a constant value K2 in your target ODS.
Please change the constant back. Go to RSA1, change target ODS, find 0FISCVARNT, right click it and choose 'Provider-specific Properties', remove K2 from 'Constant'.
Now try the reload and I'm sure no more issues. If you really want the constant then you have to change data or transformation.
p.s. Don't forget re-activating transformations and DTP
Regards,
Frank
Edited by: Frank Lee on Jul 14, 2009 3:13 PM

Error in Source System While Uploading Data from ODS to Data Target

Hi All,
Iam getting Following Error while Uploading data from ODS to Data Target
a) Error in Source System.
b)DataSource 80MKT_DS01 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80MKT_DS01 does not have the status of the source system in the Business Information Warehouse.
The time stamp in the source system is 21.06.2005 07:31:33.
The time stamp in the BW system is 27.11.2004 17:41:45.
Regards,
Chakri

This generally occurs when you change the data source or enhance the data source or the coonections to the datasoiurse are broken. To resdolve thius sort of errors just
1. Check for the coonect between the sourse & target systems
2 . Replicate the data sourcses.
3. Acivated TR,UR,& the rest of the flow But check in the source system if the structre is modified & is so do the changes in the IS , TR,UR correspondingly & the try to load .Hoppe it allows you to load .
Thanks ,
PSG

Error while loading the data from ODS to InfoCube

hai
Im trying to load the data from ODS to InfoCube for particular year .
But it says that there is a source system problem .
why it is like that .
pls tell me
i ll assing the points
rizwan

Hi Rizwan,
you didn't mention the error message in details. there could be a few places to be checked:
- check if BW itself source system is active and in tact and reactivate if necessary
- check if update rule is active and reactivate if necessary
- check if ODS is active and reactivate if necessary
Regards,
Lilly

Error while updating data from PSA to ODS

Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.

Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo

Error while laoding data from ODS to infocube

Similar Messages

Maybe you are looking for