Error while link from calendar to report

Dear,
Now I try to link from calendar to report. In the SQL Query
step of the calendar build wizard I've input as follows:
select
c.cal_date the_date,
c.cal_title the_name,
'PROJECT.CAL_RPT.show_parms?
p_arg_names=_tab_calendar_cal_id_cond&p_arg_values=%
3D&p_arg_names=tab_calendar.cal_id&p_arg_values=' || C.CAL_ID
|| ' ' the_name_link,
null the_date_link,
null the_target
from project.tab_calendar c
order by 1
But when I click link in calendar, the browser was shown
that "The page cannot be found HTTP 404 - File not found
Internet Explorer".
Why this link is incorrect? Please help me.
Thank You
sirin kittichotpanich

hai eide...
this is javascript ok..
i am also having the same problem
in plsql procedure anyway...
write this script into javascript event handler 'OnClick' ok
function open()
window.open('url','mywindow','width=100,height=100,scrollbars=yes,resizeable=yes');
open();
it should work...
regrds
hai

Similar Messages

  • Error while navigating from a report in OBIEE

    I get the below error while navigating from one report to another report
    Odbc driver returned an error (SQLExecDirectW).
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
    [nQSError: 16001] ODBC error state: 37000 code: 1101 message: [Microsoft][ODBC SQL Server Driver][SQL Server]Could not allocate a new page for database 'TEMPDB'
    because of insufficient disk space in filegroup 'DEFAULT'. Create the necessary space by dropping objects in the filegroup
    , adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup..
    [nQSError: 16015] SQL statement execution failed. (HY000).
    Any inputs on this is highly appreciated.
    Thanks,
    Vasavi

    Hi Vasavi,
    There is no Temp space in Data base to run queries .Please contact your DBA to increase your db size
    thanks,
    saichand.v
    Edited by: Saichand Varanasi on Jul 14, 2010 7:35 AM

  • Time Machine fails with "error while linking files on the backup volume"

    One of my drives was nearly full. I moved some folders from that drive to one that had more space.
    The next TM backup failed with "error while linking files on the backup volume". A full backup is about 620 GB, although this backup shouldn't have been a complete one. There was 570+ GB free on the drive.
    A Disk Verify reported "Drive appears to be okay." Earlier TM backups appeared to be fine (at least accessible). I swapped the TM drive for another, initialized it, and TM used that drive with no complaints.
    What does the message mean?
    Thanks,
    harv47

    Pondini wrote:
    harv47 wrote:
    The Time Machine Buddy widget shows no messages. None of the buttons do anything.
    What am I doing wrong?
    See #A1 in the Time Machine - Troubleshooting *User Tip,* also at the top of this forum.
    Your user account may not have permission to see the logs.
    The sentence beginning "If the message area is blank ..." shows how to figure out if that's the problem, and how to fix it.
    Post back if it's not clear, or doesn't work.
    The Tip had the answer. It was permissions.
    What follow are the messages for the last unsuccessful TM backup (on v.3), followed by
    the successful TM backup on the replacement drive (v.1). The line
    "Copied 11 files (0 bytes) from volume Bay 3 HPFS+." was odd.
    Starting standard backup
    Backing up to: /Volumes/Time Machine v.3/Backups.backupdb
    Event store UUIDs don't match for volume: Bay 3 HPFS+
    Event store UUIDs don't match for volume: Macintosh HD
    Node requires deep traversal:/Volumes/Bay 3 HPFS+ reason:kFSEDBEventFlagMustScanSubDirs|
    Node requires deep traversal:/ reason:kFSEDBEventFlagMustSc
    (Finished May 4, 2010 9:31:21 AM-- Status unknown)
    Starting standard backup
    Backing up to: /Volumes/TimeMachine v.1/Backups.backupdb
    Event store UUIDs don't match for volume: Bay 3 HPFS+
    Event store UUIDs don't match for volume: Bay 2 HPFS+
    Event store UUIDs don't match for volume: Macintosh HD
    Backup content size: 169.1 GB excluded items size: 0 bytes for volume Bay 3 HPFS+
    Backup content size: 305.5 GB excluded items size: 0 bytes for volume Bay 2 HPFS+
    Backup content size: 145.7 GB excluded items size: 7.5 MB for volume Macintosh HD
    No pre-backup thinning needed: 744.36 GB requested (including padding), 931.15 GB available
    Waiting for index to be ready (909 > 0)
    Copied 1951 files (169.0 GB) from volume Bay 3 HPFS+.
    Copied 4999 files (474.3 GB) from volume Bay 2 HPFS+.
    Copied 410304 files (612.4 GB) from volume Macintosh HD.
    No pre-backup thinning needed: 712.2 MB requested (including padding), 315.09 GB available
    Copied 11 files (0 bytes) from volume Bay 3 HPFS+.
    Copied 20 files (1.1 GB) from volume Bay 2 HPFS+.
    Copied 1103 files (1.1 GB) from volume Macintosh HD.
    Starting post-backup thinning
    No post-back up thinning needed: no expired backups exist
    Backup completed successfully.
    (Finished May 4, 2010 2:38:17 PM)
    I hope this is useful. Thanks for your help.
    harv47

  • Getting multiple error while refreshing or scheduling WebI report

    Hi BO Admin Experts ,
    Feacing  multiple errors  while refreshing or scheduling webi reports in BI4.0 CMC ,
    Please find the below errors :
    1)report schedule status failed
    2)Parameters : xxxcorp-franklinee; ATOu supply unv
    Error Message : An internal error occured while calling 'ProcessDPcmndsEx' API (Error:ERR_WIS_30270)
    3 ) Format : WebI
    Parameters : 10000000000159270
    Error Message :CORBA error while communicating with the SL service
    Could you please help me on the abive 3 issues for the WebI schedule reports
    Cheers ,
    Pradeep Gorpadu

    Hi,
    While refreshing the WEBI Reports would recommend you check the WEBI PROCESSING Server's last changed date from CMC--> Servers.
    Check when you are refreshing the reports, do you see the time stamp changed of WEBI PROCESSING servers?
    Do you keep getting this error messages for all WEBI reports? Can you re-produce this with simple e-fashion reports as well?
    After that go to the node where WEBI PROCESSING servers installed and check on the event viewer details if you see any relevant error messages.
    Regards,
    Upendra

  • ORA-12560: TNS: protocol adapter error while linking tables in Access

    One of my app dev is encountering an interesting error message while linking Oracle tables from Access. I am not able to able to reproduce this in my desktop or anywhere else. Details enclosed. Can you guys point me to a solution? Thanks in advance!
    ODBC: Oracle Client version 10.2.0.1
    Desktop : Win XP ; Access 2003
    =>Able to login to the Oracle database sucessfully using sqlplus.
    =>Able to create an ODBC datasource to Oracle database.("Test Connection" works fine)
    =>But encountering the TNS protocol adpater error while linking the table(Access->File->Get External Data-> Link tables).
    =>Not able to link any table in any schema in any Oracle database. Hence this is not a data centric issue.
    What did I do?
    => Uninstalled Oracle 8 client and installed Oracle 10 client. No luck. Encountering the same error.
    => Turned on the ODBC trace and reproduced the error. The log is enclosed:
    MSACCESS 79c-ed4     ENTER SQLAllocEnv
              HENV * 0013C620
    MSACCESS 79c-ed4     EXIT SQLAllocEnv with return code 0 (SQL_SUCCESS)
              HENV * 0x0013C620 ( 0x09d31788)
    MSACCESS 79c-ed4     ENTER SQLAllocConnect
              HENV 09D31788
              HDBC * 0013C730
    MSACCESS 79c-ed4     EXIT SQLAllocConnect with return code 0 (SQL_SUCCESS)
              HENV 09D31788
              HDBC * 0x0013C730 ( 0x09d31830)
    MSACCESS 79c-ed4     ENTER SQLSetConnectOption
              HDBC 09D31830
              SQLINTEGER 103 <SQL_LOGIN_TIMEOUT>
              SQLPOINTER 0x00000014
    MSACCESS 79c-ed4     EXIT SQLSetConnectOption with return code 0 (SQL_SUCCESS)
              HDBC 09D31830
              SQLINTEGER 103 <SQL_LOGIN_TIMEOUT>
              SQLPOINTER 0x00000014 (BADMEM)
    MSACCESS 79c-ed4     ENTER SQLSetConnectAttrW
              SQLHDBC 09D31830
              SQLINTEGER 30002 <unknown>
              SQLPOINTER [Unknown attribute 30002]
              SQLINTEGER -3
    MSACCESS 79c-ed4     EXIT SQLSetConnectAttrW with return code 0 (SQL_SUCCESS)
              SQLHDBC 09D31830
              SQLINTEGER 30002 <unknown>
              SQLPOINTER [Unknown attribute 30002]
              SQLINTEGER -3
    MSACCESS 79c-ed4     ENTER SQLDriverConnectW
              HDBC 09D31830
              HWND 001D04E4
              WCHAR * 0x74329A38 [      -3] "******\ 0"
              SWORD -3
              WCHAR * 0x74329A38
              SWORD 2
              SWORD * 0x00000000
              UWORD 1 <SQL_DRIVER_COMPLETE>
    MSACCESS 79c-ed4     EXIT SQLDriverConnectW with return code -1 (SQL_ERROR)
              HDBC 09D31830
              HWND 001D04E4
              WCHAR * 0x74329A38 [      -3] "******\ 0"
              SWORD -3
              WCHAR * 0x74329A38
              SWORD 2
              SWORD * 0x00000000
              UWORD 1 <SQL_DRIVER_COMPLETE>
              DIAG [S1000] [Oracle][ODBC][Ora]ORA-12560: TNS: protocol adapter error (12560)
              DIAG [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed (0)
              DIAG [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed (0)
    MSACCESS 79c-ed4     ENTER SQLErrorW
              HENV 09D31788
              HDBC 09D31830
              HSTMT 00000000
              WCHAR * 0x0013C5EC (NYI)
              SDWORD * 0x0013C638
              WCHAR * 0x047EE8B8
              SWORD 4095
              SWORD * 0x0013C624
    MSACCESS 79c-ed4     EXIT SQLErrorW with return code 0 (SQL_SUCCESS)
              HENV 09D31788
              HDBC 09D31830
              HSTMT 00000000
              WCHAR * 0x0013C5EC (NYI)
              SDWORD * 0x0013C638 (12560)
              WCHAR * 0x047EE8B8 [     126] "[Oracle][ODBC][Ora]ORA-12560: TNS: protocol adapter error\ a\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0"
              SWORD 4095
              SWORD * 0x0013C624 (126)
    MSACCESS 79c-ed4     ENTER SQLErrorW
              HENV 09D31788
              HDBC 09D31830
              HSTMT 00000000
              WCHAR * 0x0013C5EC (NYI)
              SDWORD * 0x0013C638
              WCHAR * 0x047EE950
              SWORD 4019
              SWORD * 0x0013C624
    MSACCESS 79c-ed4     EXIT SQLErrorW with return code 0 (SQL_SUCCESS)
              HENV 09D31788
              HDBC 09D31830
              HSTMT 00000000
              WCHAR * 0x0013C5EC (NYI)
              SDWORD * 0x0013C638 (0)
              WCHAR * 0x047EE950 [      66] "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed"
              SWORD 4019
              SWORD * 0x0013C624 (66)
    MSACCESS 79c-ed4     ENTER SQLErrorW
              HENV 09D31788
              HDBC 09D31830
              HSTMT 00000000
              WCHAR * 0x0013C5EC (NYI)
              SDWORD * 0x0013C638
              WCHAR * 0x047EE9E6
              SWORD 3944
              SWORD * 0x0013C624
    MSACCESS 79c-ed4     EXIT SQLErrorW with return code 0 (SQL_SUCCESS)
              HENV 09D31788
              HDBC 09D31830
              HSTMT 00000000
              WCHAR * 0x0013C5EC (NYI)
              SDWORD * 0x0013C638 (0)
              WCHAR * 0x047EE9E6 [      66] "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed"
              SWORD 3944
              SWORD * 0x0013C624 (66)
    MSACCESS 79c-ed4     ENTER SQLErrorW
              HENV 09D31788
              HDBC 09D31830
              HSTMT 00000000
              WCHAR * 0x0013C5EC (NYI)
              SDWORD * 0x0013C638
              WCHAR * 0x047EEA7C
              SWORD 3869
              SWORD * 0x0013C624
    MSACCESS 79c-ed4     EXIT SQLErrorW with return code 100 (SQL_NO_DATA_FOUND)
              HENV 09D31788
              HDBC 09D31830
              HSTMT 00000000
              WCHAR * 0x0013C5EC (NYI)
              SDWORD * 0x0013C638
              WCHAR * 0x047EEA7C
              SWORD 3869
              SWORD * 0x0013C624
    MSACCESS 79c-ed4     ENTER SQLFreeConnect
              HDBC 09D31830
    MSACCESS 79c-ed4     EXIT SQLFreeConnect with return code 0 (SQL_SUCCESS)
              HDBC 09D31830
    Edited by: user5598619 on Feb 10, 2009 5:37 PM

    Thanks a lot for your quick reply.
    I've read all the posts mentioned (quite a few more) but I couldn't find any suggested solution to the "non-oracle10g"-problem other than using the global db name instead of the sid - which didn't help in our case:
    However, in a last desperate attempt to solve the problem on my own before launching another cry-for-help-post I did try running the configuration assistant using the correct password for the SYS user 8-} and - strange but true - it did work :-)
    Needless to say: I used the global db name of course, so I can't say what would have happened without it, but I trust your hint was a legitimate one.
    Anyway - I gues that error Message concerning a "non-oracle10g database" was slightly misleading in this case.... grrrr.
    Andreas

  • I am havig an error while shifting from one tab to the other mozilla firefox stops for some seconds.

    error while shifting from one tab to other''''''

    I've followed what I can of that error, and from what I'm reading, your hard disk is doomed. Some people report that they've been able to reinstall OSX on the same disk and use it for as long as a few months, but eventually the error returns.
    Here's what I suggest:
    Step 1: Backup everything you want to keep immediately!
    Step 2: Buy new disk.
    Step 3: Install new disk.
    Step 4: Reinstall everything & restore.
    I highly suggest backing up as soon as possible. -- On the first day of this error my MBP would no longer boot. Thankfully, I was able to save most of my stuff using the terminal window available in the installer.
    Searching for that error code here & on google returns a fair number of hits so you can read what others have done as well. Some seem to be able to get a new drive from apple if it's still under warranty.
    Good luck!

  • Error while deleting from BIA index

    HI EXPERTS GETTING BELOW ERROR PLZ GIVE CLARITY ON THIS:
         1.A communication error occured, with the TREX TcpIp     
         2.Error while deleting from BIA index; reconstruction required     
    THANKS &REGARDS,
    rAMESH,

    Dear Ramesh,
    Please check the connection with BIA. Please ask the Basis team to check the BW to BIA connection if they maintain it.
    YOu can go to rsddbiamon2 and check BIA connection availibility for more details.
    If that is right please try redoing the step at which you faced error and it should help.
    Please close the question if you have got the answer or solved it.
    Regards,
    Den

  • Error While Executing the Asset history report S_ALR_87011990

    Hi,
    I am getting the below error while executing the Asset History Report - S_ALR_87011990
    No data was selected
    Message no. AB064
    Kindly advice me

    Hi,
    Thi may be a authorisation issue. I doubt that it will get recorded in su53 for report executing. Check with basis guy for respective asset class authorization.

  • SDM Error while deploying from IDE

    Hi I am getting an error while deploying from IDE.
    -- Server XXX did not accept login request as admin on port 50018.Details: ERROR: Could not establish connection to server XXX at port 50018: XXX
    This problem has been discussed herein SDN earlier.I also checked in the SDM trouble shooting guide and accordingly have added a entry in the host file under sys32/drivers, but still I continue to get that error.Any pointers will be appreciated.
    Regards,
    Muinul

    Hi
      Have you ever been able to deploy into SDM. What is the password that you type. Try typing SDM and see. If that doesnt work then you will have to change the password of your SDM. Your password either has been corrupted or changed
    Anyway follow these steps
    1. Start the Config Tool.
               (Execute <SAPj2eeEngine_install_dir> \configtool\configtool.bat.)
    1. Select the secure store node.
                The configuration for the secure storage in the file system appears.
    1. Select the admin/password/<SID> entry.
    2. Enter the administrator user's new password in the "Value" field and choose "Add".
    3. Choose "File" --> "Apply" to save the data.
    Note: Contrary to the message that appears, you do not need to restart the server or cluster for this change to take effect.
    4. Finally restart SDM server.
    Hope that helps. Let me know if you require more information
    regards
    Ravi

  • Error While Importing from EIF file into AW

    Hi All,
    I am facing the following error while importing from EIF file into AW using AWM as well as from sql prompt.
    java.sql.SQLException: ORA-36786: (IOSEC04) File POCAW/abc.eif does not exist or cannot be accessed.
    ORA-06512: at "SYS.DBMS_AW", line 42
    ORA-06512: at line 1
    at oracle.olap.awm.eif.eifimport.ImportDialogActionThread.doExportOrImport(ImportDialogActionThread.java:172)
    at oracle.olap.awm.eif.EifDialogActionThread.doAction(EifDialogActionThread.java:58)
    at oracle.olap.awm.ui.dialog.ThreadedDialogActionThread.run(ThreadedDialogActionThread.java:49)
    i have already created the directory pocaw.
    i have done the following steps :
    CREATE OR REPLACE DIRECTORY POCAW as 'D:\Olap_POC\export';
    GRANT all ON DIRECTORY POCAW to PUBLIC;
    execute dbms_aw.execute ('aw create ''POC_AW''');
    execute dbms_aw.execute('cda pocaw');
    execute dbms_aw.execute('dtb attach POC_AW rw');
    execute dbms_aw.execute('import all from eif file ''/abc.eif'' dfns update ');
    any idea or thought would be appreciable.
    thanks n advance
    anwar

    execute dbms_aw.execute('import all from eif file''/abc.eif'' dfns update ');
    Maybe one of the following file names could help
    (have never tried it):
    ''abc.eif''
    ''POC_AW\abc.eif''Yes,
    you don't need the slash. CDA is like setting a default directory.

  • Error while extracting from BI source

    Hi,
    We are facing a wierd problem:
    Scenario:
    Loading data from one DSO to another DSO with the help of transformation
    The DTP fails at second data package each time. First data package goes successfully but it fails at the second data package) We have tried to vary the data package for e.g. 100 records, 5 records etc.....no matter what we do the load fails at the second data package with the following error message.
    Error:
    Data package processing terminated
    Error while extracting from source EPUD0002 (type InfoProvider)
    System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE (see long text)
    Unknown error in SQL interface
    Error reading the data of InfoProvider EPUD0002
    Exception CX_RS_STEP_FAILED logged
    Workaround:
    We tried to increase the number of data package size so that all the records can be processed in only one data package and the load has never to request for 2nd data package . BUT as the data package size is big it takes long time to process and never completes....
    FYI...Our transformation has lots of abap coding ...
    Addn Info:
    SAP_BW   700   0010
    BI_CONT   703   0005
    SAP_BASIS  700  0010
    Any help will be highly appreciated...
    - Amit

    There must be some bug in the code which is causing this issue.
    try to debug it,
    refer: /people/community.user/blog/2007/03/29/sap-netweaver-70-bi-extended-capabilities-to-debug-a-data-transfer-process-dtp-request
    /people/dirk.herzog/blog/2005/02/11/abap-development-in-sap-bw

  • Message failing in SXMB_moni----Error while reading from the secure store

    Hi,
    The scenario is as below
    A file is picked up from a folder and processed to enrich it.This enriched file is then written back in a different folder.
    The message is failing in sxmb_moni while trying to write the file in the folder.
    The PI system is a system copy of another system and few of the configuration objects are transported through a tpz file to this PI system.The file receiver channel used to write this file is also transported through this tpz file.
    Below is the error seen in moni.:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?><!-- Call Adapter --> <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIServer</SAP:Category><SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code><SAP:P1/><SAP:P2/><SAP:P3/><SAP:P4/><SAP:AdditionalText>Error while reading from the secure store: ERROR_U: No service user password found for Adapter Engine</SAP:AdditionalText><SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine
    </SAP:Stack><SAP:Retry>M</SAP:Retry></SAP:Error>
    Below is Trace log:
    <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER"></Trace><!-- ************************************ -->
    <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV"></Trace><!-- ************************************ -->
    <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL"></Trace><!-- ************************************ -->
    <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
    <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP"></Trace><!-- ************************************ -->
    <Trace level="1" type="T">error reading secstore:Error while reading from the secure store: ERROR_UNKNOWN: System-dependent data for entry  changed:  / (SECSTORE,031) </Trace>
    <Trace level="1" type="System_Error">Error while reading access data (URL, user, password) for the Adapter Engine  </Trace>
    </Trace>
    </Trace>
    <Trace level="1" type="System_Error">Error exception return from pipeline processing! </Trace>
    <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST"></Trace><!-- ************************************ -->
    Is this because  PI system is a system copy of another system ?
    Regards,
    Sneha

    Error while reading access data (URL, user, password) for the Adapter Engine
    Check out Michal's reply:
    Re: URL for Central Adapter Engine
    As you said there was a system copy it may be the case that some things were not configured properly

  • Syntax errors while migrating from non- unicode to Uni code

    What are the syntax errors while migrating from non unicode to Uni code

    Hi Sudheer,
    u can get the information related to errors while migrating from non- unicode to Uni code from the below...pls go through...
    Note 765475 - Unicode Conversion: Troubleshooting
    these are the notes related to the issues of migration form non unicode to ounicode.
    Related Notes
    986907 - SQL Server settings for R3load based system copy
    954001 - Error fix: ILLEGAL_SUBSTRING_MODIFICATION in SUMG
    936441 - Oracle settings for R3load based system copy
    928909 - Repair table data in SUMG in Unicode systems
    895804 - Problematic rows in table DMEE_TREE_NODE
    895560 - Support for languages only available in Unicode system
    885441 - Common Migration Errors
    842788 - DB Multiconnect: Unicode Migration
    837173 - RADCUCNT in Unicode Conversion: Collective Note
    756534 - Automatic Assignment of Languages with Character Statistics
    753334 - Unicode Conversion: Problem in Japanese device types
    726954 - Private Use Areas in Unicode Systems
    722193 - RFC legacy non-Unicode clients and Unicode servers
    718329 - R3load terminates the export during a Unicode conversion
    695196 - Error in the export for Unicode migration
    672835 - Textflags could cause problems during Unicode conversion
    627764 - Unicode migration: table pools inconsistent after conversion
    614550 - Troubleshooting BC-I18
    587896 - Add. info on upgrade to SAP R/3 Enterprise Core 4.70 SR1
    573044 - Unicode conversion for HR application
    480671 - The Text Language Flag of LANG Fields
    379940 - Unicode based mySAP availability
    79991 - Multi-Language and Unicode support of SAP applications
    73606 - Supported Languages and Code Pages
    42305 - RSCPINST (I18N configuration tool)
    regards,
    rudra..
    Assign points if helpful

  • DPM encountered an error while reading from the recovery point used for recovery.

    Hi Guys I'm getting this error:
    DPM encountered an error while reading from the recovery point used for recovery. Either the recovery point no longer exists or, if you
    selected a share for recovery, the path to its contents is missing from the recovery point.  (265)
    The DPM Server is on Windows 2012 DPM is 2012R2 4.2.1273.0
    The Server being backed up is 2012 R2 with DPM Agent 4.2.1273.0
    The Server has 3 Data Volumes (C: Drive) and D and E its the D and E drive that i get this error if i try and recover data from DPM.  the C Drive is fine.  the D and E Drive are different
    in that 1 De-dupe is enabled and 2 the Shadow Copies for these Volumes are stored on separate Disks F and G respectively.
    I've removed the Protection from drives D and E and reinstated it but every recovery point created
    brings up the same error message. I'm not sure where to go next do I need to Protect the Disks that have the Shadow copies on also? Many thanks in advance Gordon.

    Hi,
    It seems you are in a configuration where the Windows 2012 based DPM server does not understand how to read Windows 2012 R2 Dedup data structure which is what the DPM replica volume is.
    See the DPM supported and unsupported scenarios
    here under the deduplication issues section. 
    We have a fix in DPM2012 R2 UR5 that will protect the Windows 2012 R2 dedup volume in a non-dedup state on the DPM Server, but unfortunately that will not allow previous recovery points to be read.
    KB3021791-Description of Update Rollup 5 for System Center 2012 R2 Data Protection Manager
    Backup job for dedupe-enabled volume on Windows 2012 R2 fails. For example, Data Protection Manager backup might fail for following setup:
    Data Protection Manager2012 R2 is installed on Windows Server 2012.
    Data Protection Manager is protecting a dedupe-enabled volume on Windows Server 2012 R2.
    This also applied to restores as the above was for D2D2T backup that may fail as it needs to read the recovery point to back it up to tape.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
    posting is provided "AS IS" with no warranties, and confers no rights.

  • Error while extracting from source type InfoProvider)

    Dear Sdns,
                       Am trying to load the data from the exisitng standard cube to one new ZCUBE.. The time when am loading the data. am getting the following errors...
    <b>- Data package processing terminated     
    - Error while extracting from source 0FIGL_C10 (type InfoProvider)
    - ORA-01652: unable to extend temp segment by 128 in tablespace PSAPTEMP
    - SQL Error: 1652
    - Exception CX_RS_STEP_FAILED logged</b>
    Can any one help me out from this issue...
    Answering getz appreciated,
    Warm Regards,
    Hemanth Aluri

    Hi,
    It seems like Table space problem..check with your basis team.
    regards,
    raju

Maybe you are looking for

  • Z ALV with Default Setting in save layout option disabled

    Hi friends! I need a little help. I have a Z ALV and we trying to save layout, but the option "Default Setting" is grey and I cannot use this. How can I enable this option in save layout? Thanks!!

  • Apple mail - sent item duplicates

    I have two computers with osx 10.4 installed. Each has a unique imap account. Somehow, within the last few months some sent message (particularly ones with attachments) are duplicated in the sent items folder. I setup a rule that emails the person se

  • Text translation to Portuguese

    Dear All, I am trying to translate few texts to Portuguese. When I try translating, I get error saying incorrect code page. I changed my control panel - language settings to portuguese. Still the error remains. My system code page is in 1100. Please

  • Interface to call reports

    Hi, I am looking for an interface to call oracle reports. I am using 9iAS and I thought of using Oracle Forms interface or PL/SQL cartridges(htp.p package). Could you please give your suggestions/useful docs/pros and cons in between PL/SQL cartridges

  • Safari crashes after software update

    I have just performed a systems update on my MacBook OS X 10.5.8 and now I cannot access Safari. When I click on the icon the top bar appears but no windows. When I try to access a window from my history a small darker blank window appears and then s