Error while linking dms document with cProject.
Hi,
I am encountering an error while try to link the document in cProject under SAP DMS tab. The error message is
Link Not Possible: The SAP R/3 DMS document info record contains orig (Message number 26 000).
Pls help me out to solve the this issue.
Thanking you.
Regards,
N.Ramesh
Hi,
There is no link between SAP R/3 and SAP DMS server.
Please be create for RFC's through SM59 tcode.
Regards,
Srini Nookala
Similar Messages
-
Error while linking DMS document in cProject
Hi,
When I link the document of DMS in cProject an error message
`` Link Not Possible: The SAP R/3 DMS document info record contains orig( Message number 26 000)``
is appearing. I could search the list of documents . I am facing this issue only selecting and clicking the continue button under SAP DMS tab in cProject. RFC is doing well. Pls help me to solve the issue.
Regards,
RameshHi,
Please check after using following steps.
Goto - SPRO -
> Collaboration Projects---->Structure---> Define Project Type
Please select the your project type and check SAP DMS is selected under tab Active Function.
Regards -
Error while getting xml document with default connection in 8iJServer
I had used GZIP utility to zip and store the document in
the CLOB. If i use thin drivers and GZIP to retieve this document it works fine.
instead of thin drivers if i use oracle8iJserver defalut
connection i get the follwing error
:Error while getting xml document Not in GZIP format.
your response is appreciated.
thanks
sanjay.Hi Yepin Jin,
I am facing the same issue did you solved it?
Regards,
Orlando Covault -
Time Machine fails with "error while linking files on the backup volume"
One of my drives was nearly full. I moved some folders from that drive to one that had more space.
The next TM backup failed with "error while linking files on the backup volume". A full backup is about 620 GB, although this backup shouldn't have been a complete one. There was 570+ GB free on the drive.
A Disk Verify reported "Drive appears to be okay." Earlier TM backups appeared to be fine (at least accessible). I swapped the TM drive for another, initialized it, and TM used that drive with no complaints.
What does the message mean?
Thanks,
harv47Pondini wrote:
harv47 wrote:
The Time Machine Buddy widget shows no messages. None of the buttons do anything.
What am I doing wrong?
See #A1 in the Time Machine - Troubleshooting *User Tip,* also at the top of this forum.
Your user account may not have permission to see the logs.
The sentence beginning "If the message area is blank ..." shows how to figure out if that's the problem, and how to fix it.
Post back if it's not clear, or doesn't work.
The Tip had the answer. It was permissions.
What follow are the messages for the last unsuccessful TM backup (on v.3), followed by
the successful TM backup on the replacement drive (v.1). The line
"Copied 11 files (0 bytes) from volume Bay 3 HPFS+." was odd.
Starting standard backup
Backing up to: /Volumes/Time Machine v.3/Backups.backupdb
Event store UUIDs don't match for volume: Bay 3 HPFS+
Event store UUIDs don't match for volume: Macintosh HD
Node requires deep traversal:/Volumes/Bay 3 HPFS+ reason:kFSEDBEventFlagMustScanSubDirs|
Node requires deep traversal:/ reason:kFSEDBEventFlagMustSc
(Finished May 4, 2010 9:31:21 AM-- Status unknown)
Starting standard backup
Backing up to: /Volumes/TimeMachine v.1/Backups.backupdb
Event store UUIDs don't match for volume: Bay 3 HPFS+
Event store UUIDs don't match for volume: Bay 2 HPFS+
Event store UUIDs don't match for volume: Macintosh HD
Backup content size: 169.1 GB excluded items size: 0 bytes for volume Bay 3 HPFS+
Backup content size: 305.5 GB excluded items size: 0 bytes for volume Bay 2 HPFS+
Backup content size: 145.7 GB excluded items size: 7.5 MB for volume Macintosh HD
No pre-backup thinning needed: 744.36 GB requested (including padding), 931.15 GB available
Waiting for index to be ready (909 > 0)
Copied 1951 files (169.0 GB) from volume Bay 3 HPFS+.
Copied 4999 files (474.3 GB) from volume Bay 2 HPFS+.
Copied 410304 files (612.4 GB) from volume Macintosh HD.
No pre-backup thinning needed: 712.2 MB requested (including padding), 315.09 GB available
Copied 11 files (0 bytes) from volume Bay 3 HPFS+.
Copied 20 files (1.1 GB) from volume Bay 2 HPFS+.
Copied 1103 files (1.1 GB) from volume Macintosh HD.
Starting post-backup thinning
No post-back up thinning needed: no expired backups exist
Backup completed successfully.
(Finished May 4, 2010 2:38:17 PM)
I hope this is useful. Thanks for your help.
harv47 -
Bursting Program errors with "Error while generating the Document"
Hello Folks
Here is my bursting control file
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
<xapi:globalData location="stream">
</xapi:globalData >
<xapi:request select="/XMLEXCEL1/LIST_G_Q0">
<xapi:delivery>
<xapi:email server="mycompany.com" port="25" from="[email protected]"
reply-to ="[email protected]">
<xapi:message id="1234" to="[email protected]"
attachment="true" content-type="html/text"
subject="Employee Report for Empno"> Dear
Please review the attached document</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document key="123" output-type="XLS" delivery="1234"
output="XMLEXCEL1" >
<xapi:template type="RTF" location="xdo://AR.XMLEXCEL1.en.00/?getSource=true">
</xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
this is the output of bursting status report:
<?xml version="1.0" encoding="UTF-8"?>
<BURS_REPORT><REQUESTID>40403415</REQUESTID>
<PARENT_REQUESTID>40403339</PARENT_REQUESTID>
<REPORT_DESC>XMLEXCEL1</REPORT_DESC>
<OUTPUT_FILE>/opt/local/application/orafin/applmgr/out/outfaud/S1759.zip
</OUTPUT_FILE>
<DOCUMENT_STATUS>
<KEY>123</KEY>
<OUTPUT_TYPE>XLS</OUTPUT_TYPE>
<DELIVERY></DELIVERY>
<OUTPUT>
</OUTPUT>
<STATUS>fail</STATUS>
<LOG>Error while generating the Document...</LOG>
</DOCUMENT_STATUS>
</BURS_REPORT>
Can anyone help on this please.can anyone help me?
-
Getting Error While Uploading Clause Document in SAP Sourcing 9.0
Hi,
--------------------system description--------------
SAP Sourcing 9.0
SAP NW7.31 AS JAVA
IBM DB2 9.7
I am getting error while executing clause document.
----------------------Error Description---------------
Login with buyer link into the system-> it has all authorizations
then Goto -> Contract Management -> Clause Library -> Clause list -> Click on New button -> Click on Add button -> Browse Document
it is showing POPUP with Error that "There is a problem with the Contract Generation web service Contact your system administrator"
Thanks and Regards,
Murtaza NajmiHi Gary,
it is standalone system i have, everything i have installed on one server.
i have already checked with restarting IIS server, and i can see word service while running url in contractgen.serviceurl, word service is running fine on browser but when i upload the document a popup window comes with error as i have shown above in my query
Thanks once again Gary for replying
Thanks and Regards,
Murtaza Najmi -
Getting error while opening Excel document from SharePoint site
Hello All,
I am getting following error while opening Excel document from SharePoint site.
This issue appears when we open Excel document from Windows>> Run using below mentioned command:
Excel.exe "{File Name}"
If once I go to Excel back stage and browse for the SharePoint location, then this problem disappears.
I have a work around for this issue but main problem is that i do not have any work around when i need to open Exel document using Excel COM interop in C#.
Thanks,
Amit Bansal
Amit Bansal http://www.oops4you.blogspot.com/Hi Amit Bansal,
Thanks for posting in MSDN forum.
This forum is for developers discussing developing issues involve Excel application.
According to the description, you got an error when you open the document form SharePoint site.
Based on my understanding, this issue maybe relative to the SharePoint, I would like move it to
SharePoint 2013 - General Discussions and Questions forum.
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thanks for your understanding.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Error while opening office document
Hello Gurus!
I try to use word intergation in WebIC (CRM 5.0). In "Create lead" trunsaction (CL_CRM_IC_ABOXSAMPLE_CR_LEAD class) I have Attachment tab. When I click "Create document with template" buton I get "Error while opening office document" error. In IE settings ActiveX is on. What should I do to make it work?
Best regards,
Artur.Hello Artur,
Try this Note:
Note 606745 - CRM Content Management: Document does not open
It's not exactly for that issue but it may help.
Good Luck
Eli Steklov
Please Reward Points if it Helped -
Error Message "Error while Opening the Document"
Hi Friends,
I have a problem while opening the SFP transaction and Clicking on the Layout Tab the SAP System is giving an error message saying "Error while Opening the Document".
I have tried testing on several systems like IDES, ERP, Retail systems. But it is giving me same error. Is this the problem with ADOBE LIVECYCLE DESIGNER?
And when I click on the Performance Assistant it has given me some information:
Error while opening document
Message no. SOFFICEINTEGRATION143
Diagnosis
An error occurred in the desktop application while opening a document.
Friends can you help me in solving this problem.
Thanking yoy in Advance
Pradeep GoliPradeep,
Maybe Live Cycle Designer has not been uninstalled correctly from your system. So goto the following lcaotions and remove the Designer folder if you find them:-
C:\Program Files\Adobe
C:\Documents and Settings\<your-username>\Application Data\Adobe\
Alternatively try installing Live Cycle Designer on some other machine in your network and see if you encounter the same error.
Similar thread for reference : Error - Adobe Live Cycle designer
Chintan -
Error while loading service Document Services Configuration (NW 7.0 SP13)
Hello,
I'm in the process of configuring the Adobe Document Services. Now I've received the Certificate + Credentials from SAP which I requested as described in Note 736902. I try to install them according to the Adobe Document Services Configuration Guide which I've downloaded from https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/90355269-4d89-2a10-0bb9-f388704f1dcd. [original link is broken] I've copied the pfx File to /usr/sap/<SAPSID>/SYS/global/AdobeDocumentServices/TrustManagerService/trust/credentials.
Then I started Visual Administrator and opened Server <x> → Services → Document Services Configuration. Here I get this Error returned:
Error while loading service Document Services Configuration
com.sap.engine.services.adminadapter.exception.AdminException: com/adobe/ads/service/configuration/swing/CredentialTabUI
Does anyone has a hint how I can resolve this problem?
Regards
GregorHello,
I solved this problem by restarting J2EE and the Server.
Regards
Gregor -
Error while importing MS project into cProject
Hi
I am getting the below error while importing MS project client file or XML file into cProjects.
dpr_shared087
Logon language becomes original language
Message no. DPR_SHARED087
Diagnosis
The logon language is defined as a possible text language in Customizing for Collaboration Projects under Specify Text Languages. Therefore, it is valid.
System Response
The logon language becomes the original language of the new object that was created.
Kindly suggest what configuration data if any is missing.
Regards
SrikrishnaHi
I am getting the below error while importing MS project into cProject.
Error occurred when importing from Microsoft Project
Message no. DPR_UI_BSP116
Diagnosis
When a project is imported from Microsoft Project, the system generates an XML string during internal processing. A project is then created in cProjects from this string.
The XML string contains errors because the values from Microsoft Project were transferred without verification.
Procedure for System Administration
Notify SAP or call the cProjects application with the "DebugMode=X" query string and carry out the import again.
The XML string that was generated temporarily is then validated against the cProjects XML schema. The error message from the XML parser is then displayed in the popup.
Kindly suggest, if the below steps for importing MS project is ok or not?
step 1: Create project in MS project with tasks.
step 2: Maintain maping fields of MSP in cProject configurat
step 3: Import MPP file into cProject using "Import" button.
step 4: I am getting the above error while importing the MPP file.
Regards
Srikrishna -
Error while posting billing documents
Hi,
I am trying to post billing documents for accounting , but I am getting some error related to number range.
I have checked number range assignments, where else I can check to find out error.
Regards
NidhiIf you are getting error while creating billing document -
Check your number range status assignment in T-Code - VN01
If any userexit is used then check in Userexit MV60AFZZ. There could be a Z-table where the number range may not be properly defined for the Billing Type/ plsnt/etc. as per the settings.
If Billing document is created and you get this error while posting-
Then it would be error with the number range for Accounting Document. Pls. ask the FI person to fix this.
If the above does not solve - pls. mention the exact error with error code.
Thanks -
Error while detrmining Internal Document Number for Excise Invoice.
Hello mate, I am trying to create excise invoice for for factory sale. while saving the document I am getting an error" Error
while detrmining Internal Document Number for Excise Invoice. Message: Maintain Number Range for J_1IINTNUM". I have already maintained number range for mentioned object "J_1INTNUM" in TCODE SNUM , still getting error. Please solve my querry . Is it related to transport or number range activation or something else? I have maintained number range with serial no. "01"Hello ,
Ensure that number ranges are properly maintained in the respective client that should be the year specific.Some times even u maintained the system should not consider that number ranges due to table updation problem ,because i had faced the same in the earlier and received the reply from the sap stating that this error was occured rarely after the years,so please ignore that ,for your problem u first come out of the screen and then re log in and then create the excise invoice ,then check the number ranges .
Please revert for any
Kalyan -
MDS-00521 - error while reading the document in Oracle ADF at Runtime
Hi All,
we are using Jdeveloper Version : Oracle JDeveloper 11g 11.1.1.5.0
we are getting below error message while opening the page at run time.
MDS-00521 : error while reading the document app1/screen1.jsff from metadata repository.
MDS-00569 : unable to read document app1/screen1.jsff from file "D:Oracle/Middleware11115_1/user_projects/domains/j2eeprd1/servers/app1j2eeprd1/.....
WEB-INF/Lib/ADFViewControllerapp1.jar!/app1/screen1.jsff
Note : we disable 1) Enable User Customizations and 2) Enable seeded customization in Project properties -> ADF View
can you please help us to resolve this issue.!
Thanks,This seems issue with MDS schema. You can try two things:
- Restart everything again (database and admin server as well)
- If above doesn't solve you problem. then there must problem while creating schema using RCU. Run RCU utility again, drop and recreate schema and reconfigure OIM.
This is what I suspect. Other experts can jump in with better solution.
regards,
GP -
ORA-12560: TNS: protocol adapter error while linking tables in Access
One of my app dev is encountering an interesting error message while linking Oracle tables from Access. I am not able to able to reproduce this in my desktop or anywhere else. Details enclosed. Can you guys point me to a solution? Thanks in advance!
ODBC: Oracle Client version 10.2.0.1
Desktop : Win XP ; Access 2003
=>Able to login to the Oracle database sucessfully using sqlplus.
=>Able to create an ODBC datasource to Oracle database.("Test Connection" works fine)
=>But encountering the TNS protocol adpater error while linking the table(Access->File->Get External Data-> Link tables).
=>Not able to link any table in any schema in any Oracle database. Hence this is not a data centric issue.
What did I do?
=> Uninstalled Oracle 8 client and installed Oracle 10 client. No luck. Encountering the same error.
=> Turned on the ODBC trace and reproduced the error. The log is enclosed:
MSACCESS 79c-ed4 ENTER SQLAllocEnv
HENV * 0013C620
MSACCESS 79c-ed4 EXIT SQLAllocEnv with return code 0 (SQL_SUCCESS)
HENV * 0x0013C620 ( 0x09d31788)
MSACCESS 79c-ed4 ENTER SQLAllocConnect
HENV 09D31788
HDBC * 0013C730
MSACCESS 79c-ed4 EXIT SQLAllocConnect with return code 0 (SQL_SUCCESS)
HENV 09D31788
HDBC * 0x0013C730 ( 0x09d31830)
MSACCESS 79c-ed4 ENTER SQLSetConnectOption
HDBC 09D31830
SQLINTEGER 103 <SQL_LOGIN_TIMEOUT>
SQLPOINTER 0x00000014
MSACCESS 79c-ed4 EXIT SQLSetConnectOption with return code 0 (SQL_SUCCESS)
HDBC 09D31830
SQLINTEGER 103 <SQL_LOGIN_TIMEOUT>
SQLPOINTER 0x00000014 (BADMEM)
MSACCESS 79c-ed4 ENTER SQLSetConnectAttrW
SQLHDBC 09D31830
SQLINTEGER 30002 <unknown>
SQLPOINTER [Unknown attribute 30002]
SQLINTEGER -3
MSACCESS 79c-ed4 EXIT SQLSetConnectAttrW with return code 0 (SQL_SUCCESS)
SQLHDBC 09D31830
SQLINTEGER 30002 <unknown>
SQLPOINTER [Unknown attribute 30002]
SQLINTEGER -3
MSACCESS 79c-ed4 ENTER SQLDriverConnectW
HDBC 09D31830
HWND 001D04E4
WCHAR * 0x74329A38 [ -3] "******\ 0"
SWORD -3
WCHAR * 0x74329A38
SWORD 2
SWORD * 0x00000000
UWORD 1 <SQL_DRIVER_COMPLETE>
MSACCESS 79c-ed4 EXIT SQLDriverConnectW with return code -1 (SQL_ERROR)
HDBC 09D31830
HWND 001D04E4
WCHAR * 0x74329A38 [ -3] "******\ 0"
SWORD -3
WCHAR * 0x74329A38
SWORD 2
SWORD * 0x00000000
UWORD 1 <SQL_DRIVER_COMPLETE>
DIAG [S1000] [Oracle][ODBC][Ora]ORA-12560: TNS: protocol adapter error (12560)
DIAG [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed (0)
DIAG [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed (0)
MSACCESS 79c-ed4 ENTER SQLErrorW
HENV 09D31788
HDBC 09D31830
HSTMT 00000000
WCHAR * 0x0013C5EC (NYI)
SDWORD * 0x0013C638
WCHAR * 0x047EE8B8
SWORD 4095
SWORD * 0x0013C624
MSACCESS 79c-ed4 EXIT SQLErrorW with return code 0 (SQL_SUCCESS)
HENV 09D31788
HDBC 09D31830
HSTMT 00000000
WCHAR * 0x0013C5EC (NYI)
SDWORD * 0x0013C638 (12560)
WCHAR * 0x047EE8B8 [ 126] "[Oracle][ODBC][Ora]ORA-12560: TNS: protocol adapter error\ a\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0"
SWORD 4095
SWORD * 0x0013C624 (126)
MSACCESS 79c-ed4 ENTER SQLErrorW
HENV 09D31788
HDBC 09D31830
HSTMT 00000000
WCHAR * 0x0013C5EC (NYI)
SDWORD * 0x0013C638
WCHAR * 0x047EE950
SWORD 4019
SWORD * 0x0013C624
MSACCESS 79c-ed4 EXIT SQLErrorW with return code 0 (SQL_SUCCESS)
HENV 09D31788
HDBC 09D31830
HSTMT 00000000
WCHAR * 0x0013C5EC (NYI)
SDWORD * 0x0013C638 (0)
WCHAR * 0x047EE950 [ 66] "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed"
SWORD 4019
SWORD * 0x0013C624 (66)
MSACCESS 79c-ed4 ENTER SQLErrorW
HENV 09D31788
HDBC 09D31830
HSTMT 00000000
WCHAR * 0x0013C5EC (NYI)
SDWORD * 0x0013C638
WCHAR * 0x047EE9E6
SWORD 3944
SWORD * 0x0013C624
MSACCESS 79c-ed4 EXIT SQLErrorW with return code 0 (SQL_SUCCESS)
HENV 09D31788
HDBC 09D31830
HSTMT 00000000
WCHAR * 0x0013C5EC (NYI)
SDWORD * 0x0013C638 (0)
WCHAR * 0x047EE9E6 [ 66] "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed"
SWORD 3944
SWORD * 0x0013C624 (66)
MSACCESS 79c-ed4 ENTER SQLErrorW
HENV 09D31788
HDBC 09D31830
HSTMT 00000000
WCHAR * 0x0013C5EC (NYI)
SDWORD * 0x0013C638
WCHAR * 0x047EEA7C
SWORD 3869
SWORD * 0x0013C624
MSACCESS 79c-ed4 EXIT SQLErrorW with return code 100 (SQL_NO_DATA_FOUND)
HENV 09D31788
HDBC 09D31830
HSTMT 00000000
WCHAR * 0x0013C5EC (NYI)
SDWORD * 0x0013C638
WCHAR * 0x047EEA7C
SWORD 3869
SWORD * 0x0013C624
MSACCESS 79c-ed4 ENTER SQLFreeConnect
HDBC 09D31830
MSACCESS 79c-ed4 EXIT SQLFreeConnect with return code 0 (SQL_SUCCESS)
HDBC 09D31830
Edited by: user5598619 on Feb 10, 2009 5:37 PMThanks a lot for your quick reply.
I've read all the posts mentioned (quite a few more) but I couldn't find any suggested solution to the "non-oracle10g"-problem other than using the global db name instead of the sid - which didn't help in our case:
However, in a last desperate attempt to solve the problem on my own before launching another cry-for-help-post I did try running the configuration assistant using the correct password for the SYS user 8-} and - strange but true - it did work :-)
Needless to say: I used the global db name of course, so I can't say what would have happened without it, but I trust your hint was a legitimate one.
Anyway - I gues that error Message concerning a "non-oracle10g database" was slightly misleading in this case.... grrrr.
Andreas
Maybe you are looking for
-
Hi, Recently I got an iPhone 4S, it is my first new phone in a long time, before this I had an old nokia, so I just have a few questions about it. I havve read a alot of horror stories about the 4S battery life, mine seems ok, here is what I would li
-
How to open Word file in APEX, fill it with data from DB and then save it?
Hi everybody! I haven't enough experience with HTMLDB, I searched for similar thread but didn't find anything, so I decided to write here. I want to open a MS Word document, put some data from a table or report and then close it with saving changes.
-
I have trouble downloading iTunes software and related software like the new ios8 on both my desktop--Windows 7, and my laptop--Windows Vista, because I keep getting error messages saying the software has been deleted because invalid signature. I h
-
HIII.. NEED HELP TO UNLOCK MY IPAD.. KIDS PLAYED WITH IT .. AND CHANGED THE PIN.. THEY DONT KNOW WHAT IT IS NOW.. HELP
-
Cheque Payment PLD - AP Invoice no., Date, Vendor Ref. AP Invoice Amount
hi all, I am trying to modify the Cheques for Payment PLD to include row details for each AP Invoice, included in the payment(these details are available in Outgoing Payments PLD) Details needed are: Invoice Date AP Invoice No Vendor Inv