Error while listing article with plant....

Hello Experts,
I tried to list an article to a plant using TA:-MM42 in listing view.
But it gave the folloing error:-
E M3 595 : With time-phased materials planning, enter a planning cycle
So, could you please help me to know what is the root cause of this error.
Thanks
Ashish

your material is incomplete maintained, by using a MRP type for time-phased planning you have to specify a planning cycle, actually just 2 lines below the MRP type:

Similar Messages

  • VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction id in results:

    Subject: VSTS loadtest error while running Loadtest with Runsettings as  No of test iterations ,  ERROR is :  could not read result repository: unknown transaction
    id in results:
    Hello All,
    I am facing the following error while running a loadtest (when i choose the scenario to be executed for No of test iterations). But the same loadtest with the Run duration for X minutes is running fine without any issues. 
    Any suggestions on the issue i am facing
    error is :
    could not read result repository: unknown transaction id in results:
    or
    could not read result repository: unknown request id in results: 
    Thanks
    Satish

    Hi Kotapati,
    >>Subject: VSTS loadtest error while running Loadtest with Runsettings as  No of test iterations ,  ERROR is :  could not read result repository: unknown transaction
    id in results:
    According to your description, you mean that when you run your load test using the Test Iterations way and then get the error message, am I right?
    If yes, please you try to close the VS, and then open this VS again. Then clean your load test project/solution and then re-build it, run your load test again check this issue again.
    In addition, I suggest you could try to create a new load test and then run it using Test Iterations way check if you get the issue for the specified load test or all load tests.
    If possible, I suggest you could share me simple load test for us so that we will further help you.
    You could upload your load test to OneDrive and then copy link here.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Error while Test Connection with Connector

    hi all:
         there is an error while  Test Connection with Connector , I also test it through sys administration->sys configuration->
    suport -> sap transaction, I got all errors, I put these two errors as folows, could you please tell me how to sovle it
    ***************ERROR 1 while *error while Test Connection with Connector ******************************************************
    Test Details:
    The test consists of the following steps:
    1. Retrieve the default alias of the system
    2. Check the connection to the backend application using the connector defined in this
    system object
      Results
    Retrieval of default alias successful
    Connection failed. Make sure that Single Sign-On is configured correctly
    ************error sys administration->sys configuration-> suport -> sap transaction        ********************** 1.5 #0025B3E02892006100000A0800001798000487530FB0122E#1274690722265#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt
    .runtime#guodongdong#47472##n/a##690347f0670e11df98cc0025b3e02892#SAPEngine_Application_Thread[impl:3]
    9##0#0#Error##Java###04:4524/05/10_0077_6087550
    [EXCEPTION]
    #1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Application URL
    &\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid!
    Please check the protocol and host entries for system &\#39;sapdev&\#39;.
         at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass
    (AbstractIntegratorComponent.java:123)
         at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
         at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:523)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:412)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process
    (ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

    Hi,
    As per this part of the trace:
    Exception in SAP Application Integrator occured: Application URL &\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid! Please check the protocol and host entries for system &\#39;sapdev&\#39;. at ...
    You can clearly see that the system object 'sapdev' is not configured correctly/at all - you are trying to launch transaction iView
    (WEBGUI) and in order to do so you should configure the 'internet transaction server' category of the system  object
    with the hostname of the ITS server.
    Generally the template is
    <System.Access.ITS.protocol>://<System.Access.ITS.hostname>/sap<ESID>/bc/gui/sap/its/webgui?\....
    So that's why you got
    Please check the protocol and host entries for system ..

  • Error while posting GR with MvT 835 for Brazil Plant using transaction MBSU

    Hi,
    While posting GR with MvT 835 through transaction MBSU with reference to GI document, we are receiving below error :-
    Balance not zero: **** - debit: ****
    credit: ****
    Message No.: M7050.
    We are using TAXBRA procedure for Brazil.
    We request you to please let us know what all configuration do we need to check.
    Regards,
    Kiran

    Answered.

  • Error while making iview with visual composer

    I am trying to make an iview usign visual composer.
    In the document that i have for making the iview , it says that when you have the bapi list you need to drag and drop the bapi to the empty iview pane . When i do so it gives me the following error ...
    "Portal request failed
    (com/sap/mdi/ObjectFactory)"
    What do i do ?
    Would appreciate a prompt help!
    thanks again for making me move ahead
    I had a conversation with a parson on the forum named Venkat . I am posting the same for other people in the forum to understand what exactly is my problem and how much have we explored .
    Regards
    Deepak Singh
    Hi Venkat ,
    I tried to do so research on the problem and it is being talked about in a thread on the forum . They ask to refer to the sap note 765461 to resolve the mdi reference . In the note they ask you to refer the installation guide of the installed version of EP . I have EP 6.0 SP2 . The installation guide says the following ...
    7.1.2 Adding References
    To enable some of the features in the portal environment, add references to reference file.
    To add a reference:
    1. With a text editor, open the file:
    Windows: <installation drive>:\usr\sap\<SAP J2EE instance name>\j2ee\<instance
    number>\cluster\state\services\file\work\managers\reference.txt
    Unix: /usr/sap/<SAP J2EE instance name>/j2ee/j2ee_<instance number>/
    cluster/state/services/file/work/managers/reference.txt
    2. Look for the line:
    reference service:eisconnector library:jco
    3. After the line mentioned in previous step, add the following in a new line:
    reference service:eisconnector library:com.sap.mdi
    4. Save your changes and close the file.
    5. Delete the file:
    Windows: <installation drive>:\usr\sap\<SAP J2EE instance name>\j2ee\<instance
    number>\cluster\state\services\file\work\managers.bin
    Unix: /usr/sap/<SAP J2EE instance name>/j2ee/j2ee_<instance number>/
    cluster/state/services/file/work/managers.bin
    6. Restart the SAP J2EE Engine. See Starting the SAP J2EE Engine [Page 60].
    7. Restart the SAP J2EE Engine again.
    I did the same ....but now my server is not starting . By chance i didn't keep a bakup of the file which they asked me to delete .
    Now what do i do ?
    I think i am stuck up badly here .
    EVERYBODY IN THE FORUM PLEASE HELP
    I am not sure how a thing that is mentioned in the installation guide cannot work !
    Regards
    Deepak Singh
    Deepak,
    It is not that bad. By deleting you are recreating that managers.bin file during startup based on the reference.txt and library.txt (recollecting from my memory). This could also happen if there is a typo or some special characters in the reference.txt
    I don't know what J2EE patch you are at, but after PL22 you can actually add the reference using the "add reference" command from the administrator console.
    could you please send the error you are getting? To revert back the simplest thing is removing the line you have added and restart.
    Hope this helps.
    -Venkat Malempati
    Note: Please reward points if your problem is solved or useful.
    Venkat ,
    I am using J2EE engine 6.20 SP2 .I tried to get the server started by the following two methods
    1) I removed my entry in the reference.txt file and then start the engine by running go.bat from the required path .
    2) I got the original file managers.bin which i deleted and then placed in the required path and restarted the server
    Both the options didn't work .
    I am not getting any error when i restart the server. When i run the batch file go.bat it starts the console and shows me the various managers loading . After it shows the Clustermanager loading , it stops and gets stuck .
    Not sure what should i do now .Is reinstallation the only solution ?
    Is there a solution from the administrator console ?
    Regards
    Deepak Singh
    Deepak,
    No you don't need to re-install. Try the following.
    1. First start the state controller by runing go.bat in the following directory.
    /usr/sap/xxx/j2ee/cluster/state/go.bat
    You get the message waiting for cluster manager.
    2. start the server in a different window
    /usr/sap/xxx/j2ee/cluster/server/go.bat
    You get the message waiting for cluster manager
    3. Start the dispatcher
    /usr/sap/xxx/j2ee/cluster/dispatcher/go.bat
    Please let me the know the error messages.
    You can chat with me between 10:00 - 11:00 PM US EST.
    Regards
    -Venkat Malempati

    People ,
       I tried to do what venkat suggested . Infact I had mailed him the snapshot of the screen when i start the state controller as he suggested . For other people in the forum this is what is happening . When i start the state controller it displays an error and then the window closes immediately . I have managed the screen shots somehow and in those i could find two messeges in the begining and the end which could be useful for debugging the problem ...they are
    1) [DBMS]: ID3004:DB file header do not match exception .
    com.inqmy.services.dbms.server.interfaces.DatabaseException: Error while opening database ...
    2) ID000544: Error statrting service dbms. DBMS service not started properly due to: Errro while opening database
    [Framework -> criticalShutdown] Service dbms startup error !
    After the state controller window closes i run the server in a different window and i get a message waiting for the cluster manager as suggested . Now i start the dispatcher and i get the same messege there as well ie waiting for the cluster manager .
    What is to be done now . Is this information sufficient to suggest me something ? Please let me know if you require any other information .
    Regards
    Deepak singh

  • Error while creating delivery with reference to STO

    Hi,
    I am getting the following error while creating the delivery with reference to STO
    Document is incomplete: You cannot save the delivery
    Diagnosis:
    When the system checked whether saving delivery was
    permitted, it determined that the requirements stored in
    Define Incompletion Procedures for this document do not
    allow this subsequent function.
    I have checked the following already:
    1. Maintained shipping data for both the supplying and receiving plants.
    2. Shipping tab exists in the PO
    3. Shipping point determination is checked.
    4. Customer masters created for both supplying plants and receiving plant for the sales area created for STO
    5. Material master is available in both receiving and supplying plants.
    It is working fine in one client. and giving a problem only in the other.not able to figure out where the error is. appreciate your suggestions
    regards
    joe

    Hi Joseph,
                     First go to transaction "VUA4" and see what is the incompletion procedure asigned to your delivery type. Then go to
    "OVA2" and see what are the fileds maintained in incompletion procedure of the delivery type and the status groups assigned to them. Now you go to "OVA0(ZERO) and see whether the status group allows to save the delivery. If it doesn't you can untick that check box. But if this is a live system , i doubt if you would be bale to do that. Any way one of the possible causes is storgae location missing. Kindly pelase let me know If you need any more infromation on this.
    Regards,
    Ram Pedarla

  • Licence Error while Using nqcmd with Analytics Web DSN

    Hi,
    While running nqcmd with Analytics Web DSN i am getting a DataDirect error, stating that you do not have appropriate licence to run ODBC Data Direct.
    I am getting this on Linux box but while running the same on Windows their is no such error.
    Have any one of you got such kind of stuff. I am using OBIEE which Oracle provides on her website for free for development purpose.
    Please help.
    Edited by: RKK on Oct 3, 2011 10:01 PM

    Hi,
    kindly Refer
    https://forums.oracle.com/forums/thread.jspa?messageID=2289534&#2289534
    Thanks
    Deva

  • Error while making connection with remote oracle database

    Dear,
    I am trying to make connection with oracle database but when i run java file it's raise an error "classnotfoundexception oracle.jdbc.driver.oracledriver"
    DriverManager.getConnection(
      "jdbc:oracle:thin:@erp:1521:ORCL", "apps",
      "apps");
    Pls any body have idea.
    Thanks.

    Thanks for support.
    Below is error which i am getting while making connection with remote database.
    C:\Program Files\Java\jdk1.7.0_05\bin>java OracleJDBC
    -------- Oracle JDBC Connection Testing ------
    Where is your Oracle JDBC Driver?
    java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver
            at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
            at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
            at java.security.AccessController.doPrivileged(Native Method)
            at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
            at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
            at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
            at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
            at java.lang.Class.forName0(Native Method)
            at java.lang.Class.forName(Class.java:186)
            at OracleJDBC.main(OracleJDBC.java:13)
    Advice.

  • Error while executing Initialize with Data Transfer for 0FI_GL_10

    Hello All,
    Post Pre prod refresh, our timestamp for the datasource 0FI_GL_10 got reset. Due to which our deltas did not bring any records to the BW system.
    First we did an Initialize without data transfer for all the BW related datasources. The deltas were then set properly for all datasources except 0FI_GL_10.
    We then raised a message to SAP and they suggested to run the 'Initialize with data transfer' for 0FI_GL_10 so that the timestamp is set and accordingly the deltas are fixed.
    The issue now is we are getting the following error message while running INIT with data transfer.
    Job terminated in source system --> Request set to red
    Message no. RSM078
    We have copied the data till July 1st week of 2011.
    Please advice. The issue is very critical.
    Thanks & Regards
    Sneha

    Hi Arvind
    Thanks for your inputs.
    Please find below the details of the short dump.
    Runtime Errors         DBIF_RSQL_SQL_ERROR
    Exception              CX_SY_OPEN_SQL_DB
    Date and Time          09/07/2011 11:25:32
    Short text
         SQL error in the database when accessing a table.
    What can you do?
         Note which actions and input led to the error.
         For further help in handling the problem, contact your SAP administrator
         You can use the ABAP dump analysis transaction ST22 to view and manage
         termination messages, in particular for long term reference.
    How to correct the error
         Database error text........: "ORA-01652: unable to extend temp segment by 128
          in tablespace PSAPTEMP"
         Internal call code.........: "[RSQL/FTCH/FAGLFLEXT ]"
         Please check the entries in the system log (Transaction SM21).
         If the error occures in a non-modified SAP program, you may be able to
         find an interim solution in an SAP Note.
         If you have access to SAP Notes, carry out a search with the following
         keywords:
         "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
    Information on where terminated
        Termination occurred in the ABAP program "GP_GLX_FAGLFLEXT" - in
         "FETCH_TO_ISTRUCTURE".
        The main program was "SBIE0001 ".
        In the source code you have the termination point in line 903
        of the (Include) program "GP_GLX_FAGLFLEXT".
        The program "GP_GLX_FAGLFLEXT" was started as a background job.
        Job Name....... "BIREQU_4N3PZQ12IA0X0PYGEA85IG39S"
        Job Initiator.. "BIWREMOTE"
        Job Number..... 11203300
        The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
        procedure "FETCH_TO_ISTRUCTURE" "(FORM)", but it was neither handled locally
         nor declared
        in the RAISING clause of its signature.
        The procedure is in program "GP_GLX_FAGLFLEXT "; its source code begins in line
        840 of the (Include program "GP_GLX_FAGLFLEXT ".

  • Error while import PAR with schedule task

    Hi everybody
    I've the following error while import a new PAR with schedule task in Portal NW04s
    Inner Stack is:
    Unable to lock the local configuration to run import "import_it.tsf.pld.cercapersone.updateadgruppofs.st.prjconfig_config_fwk_service_4692550,4692550_(ready)".
    System error is "LockConfigException: Configuration framework system error: "configuration-lock-service overloaded: cannot acquire central-lock file for config://local"".
    Inner Stack is:
    LockConfigException: Configuration framework system error: "configuration-lock-service overloaded: cannot acquire central-lock file for config://local"
    at com.sapportals.config.fwk.data.ConfigLockManager.lockWithDependent(ConfigLockManager.java:507)
    thanks in advance

    Hi Ram,
    I've encountered the problem only on productive instance with offline deployment (Scheduler Tasks reinitialize CRT). Before a restart I have to make sure it works.
    thanks for your help!
    Gennaro

  • Error while executing bts_ConfigureBizTalkLogShipping with SQL Server 2012 and BTS 2013

    Hi,
    while configuring the DR site for Log shipping (http://msdn.microsoft.com/en-us/library/aa560961(v=bts.10).aspx)
    exec bts_ConfigureBizTalkLogShipping @nvcDescription = '<MyLogShippingSolution>',
    @nvcMgmtDatabaseName = '<BizTalkServerManagementDatabaseName>',
    @nvcMgmtServerName = '<BizTalkServerManagementDatabaseServer>',
    @SourceServerName = null, -- null indicates that this destination server restores all databases
    @fLinkServers = 1 -- 1 automatically links the server to the management database
    Getting errors while trying to execute the stored procedure "bts_ConfigureBizTalkLogShipping".
    OLE DB provider "SQLNCLI11" for linked server "(null)" returned message "Login timeout expired".
    OLE DB provider "SQLNCLI11" for linked server "(null)" returned message "A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible.
    Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.".
    Msg -1, Level 16, State 1, Line 0
    SQL Server Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF].
    This is very strange because with the same server name (which I am passing in above query) I am able to connect from SQL Server Studio from DR site.
    Any help would be much appreciated.
    Thanks!
    Regards,
    Gautam
    Thanks! Regards, Gautam

    You need to check the DTC Connectivity between your DC and DR SQL Instance. The Linked Server requires DTC connectivity. Secondly this activity is better done from the SQL Server in question (the DC server in your case).
    You can also manually add the Linked Server. Refer
    http://msdn.microsoft.com/en-IN/library/ms188279(v=sql.105).aspx - Linking Servers and
    http://msdn.microsoft.com/en-IN/library/ff772782(v=sql.105).aspx - Creating Linked Servers.
    After having created the Linked Server(s) you can run the log shipping configuration again BUT using @fLinkServers = 0.
    Regards.

  • Error while patching OIM with BP06

    Hi ,
    I am facing error while patching OIM 11.1.1.5.0 with BP 06.
    Please see the logs below:-
    patch:
    [input] skipping input as property weblogic_password has already been set.
    [echo] unzipping the archives.....
    explode-archived-apps:
    [delete] Deleting directory /apps/oracle/middleware/Oracle_IDM1/server/apps/oim.ear
    [delete] Deleting directory /apps/oracle/middleware/Oracle_IDM1/server/apps/Nexaweb.ear
    [mkdir] Created dir: /apps/oracle/middleware/Oracle_IDM1/server/apps/oim.ear
    [mkdir] Created dir: /apps/oracle/middleware/Oracle_IDM1/server/apps/Nexaweb.ear
    [unzip] Expanding: /apps/oracle/middleware/Oracle_IDM1/server/patching/oim.ear into /apps/oracle/middleware/Oracle_IDM1/server/apps/oim.ear
    [unzip] Expanding: /apps/oracle/middleware/Oracle_IDM1/server/patching/Nexaweb.ear into /apps/oracle/middleware/Oracle_IDM1/server/apps/Nexaweb.ear
    [echo] archives unzipped successfully.....
    [echo]           seeding the out of the box jobs into db
    seed-ootb-jobs:
    seed-ootb-jobs:
    [echo] ----> SEEDING OUT OF THE BOX SCHEDULE JOBS AND TRIGGERS
    [java] Mar 25, 2013 7:32:31 PM org.quartz.core.QuartzScheduler <init>
    [java] INFO: Quartz Scheduler v.1.6.0 created.
    [java] Mar 25, 2013 7:32:31 PM org.quartz.impl.jdbcjobstore.JobStoreSupport initialize
    [java] INFO: Using thread monitor-based data access locking (synchronization).
    [java] Mar 25, 2013 7:32:31 PM org.quartz.impl.jdbcjobstore.JobStoreSupport cleanVolatileTriggerAndJobs
    [java] INFO: Removed 0 Volatile Trigger(s).
    [java] Mar 25, 2013 7:32:31 PM org.quartz.impl.jdbcjobstore.JobStoreSupport cleanVolatileTriggerAndJobs
    [java] INFO: Removed 0 Volatile Job(s).
    [java] Mar 25, 2013 7:32:31 PM org.quartz.impl.jdbcjobstore.JobStoreTX initialize
    [java] INFO: JobStoreTX initialized.
    [java] Mar 25, 2013 7:32:31 PM org.quartz.impl.StdSchedulerFactory instantiate
    [java] INFO: Quartz scheduler 'OIMQuartzScheduler' initialized from an externally provided properties instance.
    [java] Mar 25, 2013 7:32:31 PM org.quartz.impl.StdSchedulerFactory instantiate
    [java] INFO: Quartz scheduler version: 1.6.0
    [java] Mar 25, 2013 7:32:36 PM org.quartz.core.QuartzScheduler shutdown
    [java] INFO: Scheduler OIMQuartzScheduler_$_NON_CLUSTERED shutting down.
    [java] Mar 25, 2013 7:32:36 PM org.quartz.core.QuartzScheduler standby
    [java] INFO: Scheduler OIMQuartzScheduler_$_NON_CLUSTERED paused.
    [java] Mar 25, 2013 7:32:36 PM org.quartz.core.QuartzScheduler shutdown
    [java] INFO: Scheduler OIMQuartzScheduler_$_NON_CLUSTERED shutdown complete.
    [echo] ----> SEEDING COMPLETE LOG FILE
    [echo] ----> LOG FILE : ${work.dir}
    [echo] jobs seded succefully.....
    [echo]           updating the oes out of the box policies in oim db
    update-oes-ootb-policies:
    update-oes-ootb-policies:
    [echo] ----> UPDATING OUT OF THE BOX OES POLICIES     
    [java] [EL Info]: 2013-03-25 19:32:45.952--ServerSession(139722802)--EclipseLink, version: Eclipse Persistence Services - 1.1.0.r3634
    [java] [EL Info]: 2013-03-25 19:32:48.824--ServerSession(139722802)--file:/apps/oracle/middleware/Oracle_IDM1/modules/oracle.oes_11.1.1/jps-internal.jar-JpsDBDataManager login successful
    [echo] ----> SEEDING COMPLETE LOG FILE
    [echo] ----> LOG FILE : /apps/oracle/middleware/Oracle_IDM1/server/seed_data/Seed/OESPolicies
    [echo] oes policies updated successfully..
    [echo]           upgrading the oes-ootb policies accordin g to the patched xml
    upgrade-oes-ootb-policies:
    upgrade-oes-ootb-policies:
    [echo] ----> UPDATING OUT OF THE BOX OES POLICIES     
    [java] java.io.IOException: No such file or directory
    [java]      at java.io.UnixFileSystem.createFileExclusively(Native Method)
    [java]      at java.io.File.createNewFile(File.java:883)
    [java]      at oracle.iam.authzpolicydefn.loader.PolicyLoadDataLogger.createLogFile(PolicyLoadDataLogger.java:68)
    [java]      at oracle.iam.authzpolicydefn.loader.PolicyLoader.main(PolicyLoader.java:196)
    [java] Exception in thread "Main Thread" java.lang.NullPointerException
    [java]      at java.lang.Throwable.printStackTrace(Throwable.java:508)
    [java]      at oracle.iam.authzpolicydefn.loader.PolicyLoadDataLogger.createLogFile(PolicyLoadDataLogger.java:73)
    [java]      at oracle.iam.authzpolicydefn.loader.PolicyLoader.main(PolicyLoader.java:196)
    BUILD FAILED
    /apps/oracle/middleware/Oracle_IDM1/server/setup/deploy-files/setup.xml:94: The following error occurred while executing this line:
    /apps/oracle/middleware/Oracle_IDM1/server/setup/deploy-files/setup.xml:215: The following error occurred while executing this line:
    /apps/oracle/middleware/Oracle_IDM1/server/seed_data/seed-rcu-data.xml:136: Java returned: 1
    Total time: 2 minutes 25 seconds
    I have seen similar error on forum but it has not been answered.
    I have set all variables correctly and the directory has all permissions as well.
    Please let me know what I am missing here.
    Thanks in advance.

    Hi,
    Thanks for your help.
    The directory was already created during patch execution.
    My error was related to MDS password.
    The password for mds was different from OIM password so the patch errored out.
    Once the mds password was updated correctly in the profile file, the patch executed successfully.

  • Error while doing confirmation with cor6

    Dear PP gurus,
    I am getting following error while doing confirmation. please suggest.
    "Error while importing from memory QAPO SAPLQEEV
    0400000363"
    Thanks in advance
    Kailash T.

    Hi,
    The structure QAPO relates to Inspection operation records & the program - SAPLQEEV relates to Spec. tables for results recording. Hence would suggest to discuss this with your QM personnel.
    Also was able to find a link which had a same issue, but no solution posted, have a look if it helps in anyway
    http://www.sapfans.com/forums/viewtopic.php?f=27&t=173200
    Also refer to OSS note - 334400. If all the above does not resolve the issue, raise an OSS message with SAP.
    Regards,
    Vivek

  • Error while doing commit with UnitOfWork

    Hi all,
    I get the following error while trying to do a commit with Unit of Work:
    I'm trying to Insert a Row into the table here.
    EXCEPTION DESCRIPTION: java.sql.SQLException: DSRA9350E: Operation Connection.commit is not allowed during a global transaction.
    INTERNAL EXCEPTION: java.sql.SQLException: DSRA9350E: Operation Connection.commit is not allowed during a global transaction.
    ERROR CODE: 0LOCAL EXCEPTION STACK:
    EXCEPTION [TOPLINK-4002] (TopLink - 9.0.3 (Build 423)): oracle.toplink.exceptions.DatabaseException
    EXCEPTION DESCRIPTION: java.sql.SQLException: DSRA9350E: Operation Connection.commit is not allowed during a global transaction.
    INTERNAL EXCEPTION: java.sql.SQLException: DSRA9350E: Operation Connection.commit is not allowed during a global transaction.
    ERROR CODE: 0
         at oracle.toplink.exceptions.DatabaseException.sqlException(Unknown Source)
         at oracle.toplink.internal.databaseaccess.DatabaseAccessor.commitTransaction(Unknown Source)
         at oracle.toplink.publicinterface.Session.basicCommitTransaction(Unknown Source)
         at oracle.toplink.threetier.ClientSession.basicCommitTransaction(Unknown Source)
         at oracle.toplink.publicinterface.Session.commitTransaction(Unknown Source)
         at oracle.toplink.publicinterface.UnitOfWork.commitTransaction(Unknown Source)
         at oracle.toplink.publicinterface.UnitOfWork.commitToDatabase(Unknown Source)
         at oracle.toplink.publicinterface.UnitOfWork.commitRootUnitOfWork(Unknown Source)
         at oracle.toplink.publicinterface.UnitOfWork.commit(Unknown Source)

    Are you trying to make use of TopLink's JTS integration for the UnitOfWork?
    How are you acquiring the UOW in code?
    non-JTS, make sure to use session.acquireUnitOfWork()
    for JTS, session.getActiveUnitOfWork() and never call uow.commit() since TXs are method based in an EJB.
    Also, for JTS - ensure you tell TopLink's session you are using an external TX controller in the sessions.xml, just consult the examples that install with TopLink for a sessions.xml that makes use of external TXs.
    Darren

  • Error while synching PDA with server

    Hello,
    Before I can load some CRM applications on to my PDA, I am trying to synch my PDA with the server.
    When I synchronized I got the device ID and also the message that synch has started successfully. But when I go in the NWA of the server ( on my laptop) and search this device ID it shows the following error
    "Error while Smart Sync inbound processing. Reset Smart Sync data on device to ensure consitency with middleware. Contact SAP Support and provide following detalied information: Inbound Processing of container with index 45 failed: Can not find top row"
    Does anyone know what could be wrong here?
    Regards,
    Prafful

    Hi,
    We are also experiencing this error. Where you able to find a solution? Do you have any troubleshooting steps you could share with me for when it does occur?
    Kind Regards,
    Vinnie

Maybe you are looking for