Error while loading data for table. (ADM0161)

I've this messages when I perform a Scan
and Repair operation in version 5.1
The table is obj_X_DOCUMENTS
Can you help me?
Thanks

Check following KB (SAP Note) - 1181953 - Errors: "ADM0161," "DA0005," "ORA-12535," "ORA-00911,"ORA-01001" and "ORA-12560" after moving repository and data source databases between database servers.
Either connection to your Document domain is not working or you have corrupted DB and need to restore from backup.
Please note, 5.1 is no longer supported. Only online content is still available.

Similar Messages

Error While loading data for LIS InfoSources.

Hi All,
I am repeatedly receiving load failure errors while loading data using 2lis_01_s001 (This is the case with all the InfoSources).
The error message is:
An error occurred in the source system.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
in our Quality system, we disabled the LIS Updation to No Update(R3) and loaded data and then again changed the Update Mode for No Updating to Asynchronous Update(R3). But now we are doing dataloading in Production. How to proceed. Should we have to disable the LIS Updating whenever we have to load the loads from R3 to BW.
Regards
Jay

Hi Jayanthy,
Pls. check the order of the fields in the two set up tables for the S001 structure. The order of fields in both the tables should be the same.
You can see the structure in the TCode - SE11.
If the order is different, then you bneed to ask the BASIS person to change the order so that the order of fields in both the setup tables is same. This should fix the issue.
Thanks,
Raj

Error while loading data for Master dara

Dear Masters
I am getting below error for master data (0MATERIAL_ATTR), while loading data from PSA to 0material_attr through DTP (I have set the Handle duliocate record also). When I checked that error data in Error Stack, I am getting below error for all records for 100 records
"Record filtered in advance as error records with the same key exist"
Could u please help me to resolve this issue
Thanks in Advance
Raja

Hi
While loading master data im getting below error
"Record filtered in advance as error records with the same key exist".
When I clicked, above error Long Text, I am getting below error
Diagnosis
     The existing DTP requires a serialized update because fields are updated
     non-commutatively during the processing run (for example, MOVE).
     Therefore all new data records that have the same semantic key as
     incorrect records that have not yet been corrected in earlier requests
     or earlier data packages of the same request, are filtered out after the
     extraction in a special step. In this way the system ensures that
     incorrect data records are not repeated for your changes, which may not
     contain errors themselves.
System Response
     The data record is not updated but is written to an error stack.
Procedure
   Correct all incorrect data records and update them using an error DTP.
Procedure for System Administration

Error while loading data to table

I was trying to load data into 2 tables using a single control file. When I run the program, it ends up in error.
The error shown is
The executable file /appl/apps/apps_st/appl/ap/12.0.0/bin/TEST_SHELL for this concurrent program cannot be executed.
Contact your system administrator or support representative.
Verify that the execution path to the executable file is c
The error is incomplete.
Please help me with this.
Thanks,
Anand

Pl post details of OS, database and EBS versions.
Pl confirm you followed all of the steps in these docs
How to Use 9i or 10g Features in SQL*Loader for Apps? [ID 423035.1]
How To Create A Custom Concurrent Program With Host Method and Pass Parameters To The Shell Script [ID 266268.1]
HTH
Srini

Error while loading data oracle table using xslt

Hi
I have an following xml:
<TRAN TRAN_ID = "12" RCODE = "W"> <STATION>1234567</STATION> </TRAN>
I have created the following xslt for the above xml:
<?xml version="1.0"?> <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0"> <xsl:template match="TRAN"><xsl:value-of select="@TRAN_ID" /> <xsl:value-of select="@RCODE" /> </xsl:template> </xsl:stylesheet>
I am trying to insert data into the table Tran having columns tran_id and rcode in oracle database 11g.
I am getting the following error:
ERROR at line 1:
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00210: expected '<' instead of '1'
ORA-06512: at "SYS.DBMS_XMLSTORE", line 78
ORA-06512: at "SYS.DBMS_XMLSTORE", line 88
Can anybody tell me if i am making a mistake in writing the xlst?
Thanks in advance.

Thank you for your reply. Currently i am using the insert using xmltable and it works fine. But i would like to use xsl if the dynamic passing of values is possible. Actually i want to store the xsl in a table and call it when needed to insert data to the database table (MSGS). Could you please give me an example of it?
Here is the table structure i have in database:
Table Name: Tran_data
columns: SEQ NUMBER NOT NULL ,
TRAN_ID VARCHAR2(6) NOT NULL ,
RCODE VARCHAR2(30) NOT NULL ,
TRAN_DT DATE NOT NULL ,
xml_data xmltype
Table Name : Msgs
SEQ NUMBER NOT NULL,
RULE_ID VARCHAR2(200) not null,
MSG_TXT VARCHAR2(2000) NOT NULL,
TRAN_DATA_SEQ NUMBER NOT NULL ,
CREATE_USER VARCHAR2(30) NOT NULL ,
CREATE_DATE DATE NOT NULL ,
COMMENTS VARCHAR2(2000)
In this TRAN_DATA_SEQ is a foreign key and is a mandatory column. I can get the Tran_id and the rcode from xml. but the remaining mandatory columns i need to pass them to the xsl. Below is the xsl. Can you please let me know how to pass value to this the xsl.
[P]
xml:
<RES>
<Status>'PASS'</Status>
<Tran_id>1A</Tran_id>
<Rcode>1BR</Rcode>
<Msg>
<Rule_Id>A<Rule_Id>
<Msg_Text>'CRDT Failed'<Msg_Text>
</Msg>
<Msg>
<Rule_Id>B<Rule_Id>
<Msg_Text>'MAN Failed'<Msg_Text>
</Msg>
</RES>
[P]
I need an xsl for this xml to insert tran_id and rcode in tran_data table along with the xml as xml_data and the msg information in msgs table. The seq of tran_data needs to be inserted into the msgs table. Please let me know how this can be achieved using xsl?
Thanks in advance.

Error: SQL*Loader-926: OCI error while OCIStmtExecute(trigger_hp) for table

HEllo, i've a problem when i try to load a file, the message is:
SQL*Loader-926: OCI error while OCIStmtExecute(trigger_hp) for table <table>
ORA-00904: invalid column name
what is the solution for this?
thanks

The root cause is in the error ora-1426, which you can look up in the online error documentation at http://tahiti.oracle.com . No one knows every error message by heart. This means it is expected you look up the error prior to posting, and you don't expect any volunteer in this forum to look up the error on your behalf.
Also this is a typical candidate for being a known problem, and known problems can be found on My Oracle Support.
Sybrand Bakker
Senior Oracle DBA

Error while loading data into ODS

Hi we have BI for NW04S and CRM4.0. While loading data for a CRM ODS , I have received a error message which I never seen before. Yesterdaya data load was smooth and I only see issue while loading data today
The error message in the monitor is as follows
"Port 'A000000003' does not exists in the table of Port Description' ( message ID E0, NO 31 ).
have anybody encountered this.
Thanks
Arun

Thanks Marc,
we found the table EDIPOA and found that the port that is missing. It seems that the enytry( row) for our CRM system is missing which has this port as a field in this table.
Not sure whether to manually populate it or it's part of the source system repair etc.
please let me know
Thanks
Arunava

Error while creating data warehouse tables.

Hi,
I am getting an error while creating data warehouse tables.
I am using OBIA 7.9.5.
The contents of the generate_clt log are as below.
>>>>>>>>>>>>>>>>>>>>>>>>>>
Schema will be created from the following containers:
Oracle 11.5.10
Universal
Conflict(s) between containers:
Table Name : W_BOM_ITEM_FS
Column Name: INTEGRATION_ID.
The column properties that are different :[keyTypeCode]
Success!
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
There are two rows in the DAC repository schema for the column and the table.
The w_etl_table_col.KEY_TYPE_CD value for DW application is UNKNOWN and for the ORA_11i application it is NULL.
Could this be the cause of the issue? If yes, why could the values be different and how to resolve this?
If not, then what could be the problem?
Any responses will be appreciated.
Thanks and regards,
Manoj.

Strange. The OBIA 7.9.5 Installation and Configuration Guide says the following:
4.3.4.3 Create ODBC Database Connections
Note: You must use the Oracle Merant ODBC driver to create the ODBC connections. The Oracle Merant ODBC driver is installed by the Oracle Business Intelligence Applications installer. Therefore, you will need to create the ODBC connections after you have run the Oracle Business Intelligence Applications installer and have installed the DAC Client.
Several other users are getting the same message creating DW tables.

Error while loading data from 0FI_TX_4 to ODS

Dear Friends,
One of our proccess chain getting error since a week, every day with same error while loading data from R3 data source 0FI_TX_4 to ODS.
Short dump is raised in R3 system.
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"SAPLBWFIR" or "LBWFIRU13"
"BWFIR_READ_BSET_CPUDT_DATA"
ORA-01555
The number of records are below 10000 only.
All other chains are OK.
we have already searched SDN and Notes...and applied below solution, but still no use
Increase the size of all the roll back segments
Increase number of REDO logs
Decrease the number of records per data packet
Any more suggessions please ??
Thanks
Tony

How are you telling that no. of records are below 10000 .Have you checked the no.of records in PSA???
Now ,I tell you something which I had done for this error .I increased the Package size such that whole data gets transferred in single data package.Please make the package size as large as possible so that all the data can be processed in single package.
I know you have read so many threads on the same but what I am suggesting is what I have done and successfully rectified this issue.
regards,
rocks

Error while loading data to ODS

Hello BW folks ,
I am getting an error while loading data to ODS from R/3 data source.
The error message is " Error in PSA".
We have deleted yesterday data from PSA for the related infosource/data source successfully .
Since then this error is occuring. Previously data upload was successful.
In Detail tab of monitor we are getting error message in Request option ( red Mark )
and the same request is not going to R/3 .
<b>The related Job itself is not present in R/3 .</b>
This looks very strange and new to me .
Could anyone help me in rectifying this issue ?
Thanks in Advance.
Best Regards ,
Amol.

Hello All,
Thanks for reply.
I tried to replicate the data source once again and activate the transfer rules in BW Production by running program in SE38 = RS_TRANS* activate all tranfer sturctures , then I got an error message that one infoobject is added to transfer rules in BW Production .
But interestingly the same Transfer rules do not have this infoobject in BW Development server . So I create once again a request for Transfer rules in Dev and transported it to BW production.
and This solved the problem
The error message in Monitor was " Error in PSA " and then request itself was not going to R/3 . But the real issue was with Transfer rules. So after rectifying it we have solved the problem of data upload.
Best Regards ,
Amol Kulkarni.

10)example of errors while loading data and how do u resolve them?

)example of errors while loading data and how do u resolve them?

hai ram reddy this is ramprasad reddy....u can get this type of most commen errors....like below
As the frequent failures and errors , there is no fixed reason for the load to be fail , if you want it for the interview perspective I would answer it in this way.
a) Loads can be failed due to the invalid characters
b) Can be because of the deadlock in the system
c) Can be becuase of previuos load failure , if the load is dependant on other loads
d) Can be because of erreneous records
e) Can be because of RFC connections.....(sol: raise the ticket to BASIS team to provide the connection)
f)can be coz of missing master data.
g)can be coz of no data found in the source system.
h)Time stamp error........(sol: activate the data source and replicate the data source and load)
i)Short dump error.........(sol: delete the request and load once again)
j)Data locking when loading in parallel.
k)ODS activation failures.
l)No SID found........(sol: should load masterdata before transaction data)

Error while loading data from a file on application server

Hi all,
Facing an error while loading data from a flat file.
Error 'The argument '##yyyymmdd;@##' cannot be interpreted as a number ' while assigning character.
I changed the format of date fields (tried with number,general,date(International))in the xls. But i still get the same error.Did check all the data types in Data source all the fields are dats.
Can you please tell me what could be the problem?
Thank you all,
Praveen

Hi all,
As far as my first question i got through it but i had one more field in my flat file while actually is a time stamp, but in my flat file i have a data in this format
10/21/2006 5:11:48 AM which i need to change to 10/21/2006
one more note is i have some of the fields as NULL in this field
Last Updated Date
10/21/2006 5:11:48 AM
10/21/2006 5:11:48 AM
NULL
NULL
10/21/2006 5:11:48 AM
NULL
I want to display the values as 10/21/2006 and NULL as it is.
Please let me know if we have a conversion routine in datasource which can solve my problem.
Regards,
Praveen

Error while loading data from DS into cube

Hello All
I am getting the below error while loading data from Data source to the cube.
Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20070331
Wht am i suppose to do?
Need ur input in this regard.
Regards
Rohit

Hi
Simply map 0calday to 0fiscper(you already done it)..You might have forgotten to map fiscal year variant in update rules....if it comes from souce,just map it..if it won't comes from source...make it as constant in update rules and give value..
If your business is April to March make it as 'V3'
If your business is January to Decemeber make it as 'K4'..
activate your update rules delete old data and upload again....
Hope it helps
Thanks
Teja

Error while loading catalogue for n78

Hey I'm from Lebanon and I have nokia n78 with maps 3.0 , I try to download maps via nokia map loader but I keep getting a message : error while loading catalogue for n78 .
but when I roll back to maps 2.0 it works fine... Please I want help on this because I want to use maps 3.0 not 2.0. But I can't
N.B: I tried everything ( deleting cities and qf folders ...)

mr_abong wrote:
I cannot download map using Map loader 3.0
it say "Error while loading catalogue for n78"
what should i do?
anyone have download link for map package?
If you upgrade from maps 2.0 to 3.0, delete the file named "qf" and a folder "cities" from your memory card, open map 3.0 once and close it before you start the map loader.
Message Edited by goofyskyhero on 30-Jul-2009 03:21 PM

Error while loading data into External table from the flat files

HI ,
We have a data load in our project which feeds the oracle external tables with the data from the Flat Files(.bcp files) in unix.
While loading the data, we are encountering the following error.
Error occured (Error Code : -29913 and Error Message : ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04063: un) while loading data into table_ext
Please let us know what needs to be done in this case to solve this problem.
Thanks,
Kartheek

Kartheek,
I used Google (mine still works).... please check those links:
http://oraclequirks.blogspot.com/2008/07/ora-29400-data-cartridge-error.html
http://jonathanlewis.wordpress.com/2011/02/15/ora-29913/
HTH,
Thierry

Error while loading data for table. (ADM0161)

Similar Messages

Maybe you are looking for