"Error While loading data from ODS to Target "

Hi All,
I am loading masterdata from ODS to infoobject as data target, I am getting an error message as
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
DataSource 80BP_ID does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 09.08.2006 10:17:24.
The time stamp in the BW system is 15.03.2006 16:44:34.
But we are getting Data till ODS, when we manually load from ODS to infoobject this error is coming up.
Please help in resolving this,
Thanks,
Sairam.

You are welcome Sairam
The generated objects are export datasources based on the ODS objects. These are automatically generated because ODS objects are a key component to a data model or datawarehouse strategy where their role is to stage the data for consolidation or harmonization purposes. The generated datasource helps you to load data into further data targets. The use of a cube as an export datasource is not as common, and so the datasource is not automatically generated for them.
Hope this helps...

Similar Messages

Error While Loading data from ODS to Infocube

I am trying to load data from ODS to Infocube thru Update ODS data into data target. My requirement was to take a small subset of fields from ODS and design IC and load the data.
My load fails at Extraction process as I get 0 records from total number of records sent in each package. Please let me know if you need more information.
Please advise.
Thanks,
RR

In Details tab of monitor, in extraction step,
Extraction(messages): Errors occured
Green Light for Data Request Received
Green Light for Data Selection Scheduled
Yellow for 25000 Records sent(0 records received)
Yellow for 25000 Records sent(0 records received)
Yellow for 15000 Records sent(0 records received)
Green Light for Data Selection Ended
Please let me know, If you need more information.
Thanks,
R R

Error while loading data from ODS to IC.

Hi Experts,
             I am trying to load data from ODS to IC using Initial load. I failed first time. Then when I am trying to schedule it again I am getting a error message. I deleted the intial request. Even after that, I am getting the following message. Am I missing something?
Delete init. request
REQU_BQQCBQV5ZK9YEBB416C8QXXLC before running
init. again with same selection
Also can any one provide me a document that contians the lenght of all teh technames? I know I can find it out by looking into each one of the Tech Names. But I would be nice if anyone of you can provide me a document.
Can anyone of you please help me.
Thanks,
Nandini.

Hi,
By reading the error:
No transfer structure for InfoSource 8ZYNA_ODS and source system B3TCLNT800
I think the problem is actually with a Datamart. You can try to regenerate the export datasource and activate it.
Also, you can try to activate only the transfer structure again using the report "RS_TRANSTRU_ACTIVATE_ALL".
I hope this helps!
Pietro

Error while loading data from ODS to CUBE.

Hi friends,
When l am loading data from ODS to Cube with help of data mart, I am getting error in QA system , IN DM system ,every thing went well.IF i see the detail tab in monitor under Processing .
Its is showing like this .
Transfer Rules : Missing Massage.
Update PSA : missing massage.
Processing end : missing message.
I have checked the coding in update rules, everything is ok.
Plz any inputs.
hari
Message was edited by:
hari reddy

Might means that IDocs flow is not defined properly in your QA system for myself-SourceSystem.
Regards,
Vitaliy

Error While Loading Data from ODS to ODS

Hi Experts,
When i'm loading the data from ods to further ods, i'm facing an error while activating the data saying that 0ref_doc_no consists of invalid characters.Also it is saying that Error when assigning SID.
I'm unable to see the long text for further information.
Regards,
Vijay

Hi vijay bhaskar,
first go to RSA1 -> go to datasource -> search for the data source with name "8<old DSO>". Go to dispaly and click on PSA button on top. Now you can see PSA data request. in the bottom left you select error records and display. now you will see all the error records. go through each and every records and see what is the special characteristic in that record and copy that special character in notepad. After collecting all the special characters in notepad, goto RSKC -> paste all the special characteristics from note pad. execute it.
Now, go back to PSA, delete the request from PSA. Schedure the infopackage to load the data. Now, will not see any error like special characteristics.
I hope you understood and can handle your issue.
Assign points if it is helpful.
Reagds,
S P.

Error while loading data from 0FI_TX_4 to ODS

Dear Friends,
One of our proccess chain getting error since a week, every day with same error while loading data from R3 data source 0FI_TX_4 to ODS.
Short dump is raised in R3 system.
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"SAPLBWFIR" or "LBWFIRU13"
"BWFIR_READ_BSET_CPUDT_DATA"
ORA-01555
The number of records are below 10000 only.
All other chains are OK.
we have already searched SDN and Notes...and applied below solution, but still no use
Increase the size of all the roll back segments
Increase number of REDO logs
Decrease the number of records per data packet
Any more suggessions please ??
Thanks
Tony

How are you telling that no. of records are below 10000 .Have you checked the no.of records in PSA???
Now ,I tell you something which I had done for this error .I increased the Package size such that whole data gets transferred in single data package.Please make the package size as large as possible so that all the data can be processed in single package.
I know you have read so many threads on the same but what I am suggesting is what I have done and successfully rectified this issue.
regards,
rocks

Error while loading data to ODS

Hello BW folks ,
I am getting an error while loading data to ODS from R/3 data source.
The error message is " Error in PSA".
We have deleted yesterday data from PSA for the related infosource/data source successfully .
Since then this error is occuring. Previously data upload was successful.
In Detail tab of monitor we are getting error message in Request option ( red Mark )
and the same request is not going to R/3 .
<b>The related Job itself is not present in R/3 .</b>
This looks very strange and new to me .
Could anyone help me in rectifying this issue ?
Thanks in Advance.
Best Regards ,
Amol.

Hello All,
Thanks for reply.
I tried to replicate the data source once again and activate the transfer rules in BW Production by running program in SE38 = RS_TRANS* activate all tranfer sturctures , then I got an error message that one infoobject is added to transfer rules in BW Production .
But interestingly the same Transfer rules do not have this infoobject in BW Development server . So I create once again a request for Transfer rules in Dev and transported it to BW production.
and This solved the problem
The error message in Monitor was " Error in PSA " and then request itself was not going to R/3 . But the real issue was with Transfer rules. So after rectifying it we have solved the problem of data upload.
Best Regards ,
Amol Kulkarni.

Error while loading data from a file on application server

Hi all,
Facing an error while loading data from a flat file.
Error 'The argument '##yyyymmdd;@##' cannot be interpreted as a number ' while assigning character.
I changed the format of date fields (tried with number,general,date(International))in the xls. But i still get the same error.Did check all the data types in Data source all the fields are dats.
Can you please tell me what could be the problem?
Thank you all,
Praveen

Hi all,
As far as my first question i got through it but i had one more field in my flat file while actually is a time stamp, but in my flat file i have a data in this format
10/21/2006 5:11:48 AM which i need to change to 10/21/2006
one more note is i have some of the fields as NULL in this field
Last Updated Date
10/21/2006 5:11:48 AM
10/21/2006 5:11:48 AM
NULL
NULL
10/21/2006 5:11:48 AM
NULL
I want to display the values as 10/21/2006 and NULL as it is.
Please let me know if we have a conversion routine in datasource which can solve my problem.
Regards,
Praveen

Error while loading data from DS into cube

Hello All
I am getting the below error while loading data from Data source to the cube.
Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20070331
Wht am i suppose to do?
Need ur input in this regard.
Regards
Rohit

Hi
Simply map 0calday to 0fiscper(you already done it)..You might have forgotten to map fiscal year variant in update rules....if it comes from souce,just map it..if it won't comes from source...make it as constant in update rules and give value..
If your business is April to March make it as 'V3'
If your business is January to Decemeber make it as 'K4'..
activate your update rules delete old data and upload again....
Hope it helps
Thanks
Teja

Error while loading data to ODS in BI7

Getting such following errors when loading data to ODS through DTP(Data Transfer Process) in BI7.
Runtime error while executing rule -> see long text RSTRAN
Record filtered because records with the same key contain errors     RSM2
and many so on...
source system is ok no problem with the connection part.
plz help.

Hi Anup.
Probably your records are not Unique, while you have told the system they should be.
Try to move a discrimination characteristic from data fileds to key fileds.
Or
Try to set the "duplicate reords allowed" setting in your datasource (tab "General Settings" Delivery of Duplicate Data Recs. = Allowed)
Udo

Error while laoding data from ODS to infocube

Hi all,
I am trying to load data from ODS to Cube but its giving error.
I am getting following error
An error occurred while executing a transformation rule:
The exact error message is:
The argument 'Result dependent booking' cannot be interpreted as a
number
The error was triggered at the following point in the program:
GPD5CD2GMGXQYJ77HKMS0C0CQVE 2510
System Response
     Processing the data record has been terminated.
Procedure
      The following additional information is included in the higher-level
     node of the monitor:
     o   Transformation ID
     o   Data record number of the source record
     o   Number and name of the rule which produced the error
Procedure for System Administration.
How to resolve this error, it will be great help if anyone post the steps

Thanks Ananda for your suggestion,
CAn you please tell me How to identify which rule has a problem ..is there any way which tell me which rule and which record is creating a problem

Problem while loading data from ODS to infoobject

Hi guys,
I am facing problem while loading data from <b>ODS to infoobject</b>.
If I load data via PSA it works fine but
if I load data without PSA its giving error as Duplicate records.
Do u have any idea why it is so.
Thanks in advance
savio

Hi,
when you load the data via the PSA, what did you select? Serial or Paralel?
If you select serial most likely you don't have duplicates within the same datapackage and your load can go through.
Loading directly in the IObj will happen thefore if you have the same key in two different packages, the "duplicate records" will be raised; you can perhaps flag your IPack with the option "ignore duplicate records" as suggested...
hope this helps...
Olivier.

Error while loading data from application server

Hi all,
Am facing a problem while loading data from application server.
The error i get is ....
*" The argument ' Rental/Lease ' cannot be interpreted as a number while assigning character to application structure*.
'Rental/Lease' is a value for a character infoobject length 30. I checked for the sequence of fields in data source and the sequnce of values am receiving in application server and the sequence match.
when i copy these values into a CSV onto a desktop and load,load is successful.
Please let me know your views.
Thanks&Regards,
Praveen

It looks like the system is trying to convert Rental/Lease to a number format. Is the info object type CHAR or NUMC or ??? I would look there.
Also, make sure / is in RSKC.
Brian

Error while loading data from R/3 to PSA

Hi,
While loading data from R/3 to PSA i am getting error 'the argument 0.6 j cannot be interpreted as a number when assing application structure.Actually in R/3 0.6 and JPY are 2 different columns.So when loading J is getting concatenated with 0.6,so i think i am getting this error.
Hope i am clear.
please help me to resolve this issue.
Thanks in Advance,
Girish

Hi,
U have to go thru the note and chk/compare the settings with ur system...i.e packages, levels...
If not take the assistance from BASIS...
Note; And also all the notes may not be the exact note tht matches ur issue always...its jst a comparision within our system...If it doesn't solve our issue we have to search for another alternative...
rgds,

Error while loading data from ECC to BI

Hi BW Experts,
while loading data from ECC 6.0 to BI i got error in details tab of the infopackage as datapackage 1 arrived in bw processing not yet finished.
Could any one help me out?
Thanks

Amar,
please check the source system job status. If its successfully completed then we can expect data load sucess in BW side.
to check source system status: RSMO> select related load>in Menu Environment-->Job overview in source system.
once this over check the TRFC or IDocs struck
if TRFC, chk in TCode-SM58 or from environment select TRFC from source/data warhouse.
if you are finding TRFcs are in stuck just select and run manually to complete.
M

"Error While loading data from ODS to Target "

Similar Messages

Maybe you are looking for