Error while loading data into Oracle db using SSIS

Hi,
Can somebody help regarding the following error message:
Message
Error: 2013-07-21 03:23:50.76     Code: 0xC0202009     Source: Data Flow Task 25 Destination 121 - BUSINESSFLOWLOG 1 [466]     Description: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.  An OLE DB record is available.  Source: "OraOLEDB"  Hresult: 0x80004005  Description: "ROW-00060: Internal error: [dainsert,16]`? ".  End Error  Error: 2013-07-21 03:23:50.76     Code: 0xC0209029     Source: Data Flow Task 25 Destination 121 - BUSINESSFLOWLOG 1 [466]     Description: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR.  The "input "Destination Input" (479)" failed because error code 0xC020907B occurred, and the error row disposition on "input "Destination Input" (479)" specifies failure on error. An error occurred on the specified object of the specified component.  There may be error messages posted before this with more information about the failure.  End Error  Error: 2013-07-21 03:23:50.76     Code: 0xC0047022     Source: Data Flow Task 25 SSIS.Pipeline     Description: SSIS Error Code DTS_E_PROCESSINPUTFAILED.  The ProcessInput method on component "Destination 121 - BUSINESSFLOWLOG 1" (466) failed with error code 0xC0209029 while processing input "Destination Input" (479). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.  There may be error messages posted before this with more information about the failure.  End Error  Error: 2013-07-21 03:23:50.78     Code: 0xC02020C4     Source: Data Flow Task 25 Source 121 - BUSINESSFLOWLOG 1 [511]     Description: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.  End Error  Error: 2013-07-21 03:23:50.78     Code: 0xC0047038     Source: Data Flow Task 25 SSIS.Pipeline     Description: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.  The PrimeOutput method on component "Source 121 - BUSINESSFLOWLOG 1" (511) returned error code 0xC02020C4.  The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.  There may be error messages posted before this with more information about the failure.  End Error  DTExec: The package execution returned DTSER_FAILURE (1).  Started:  03:00  Finished: 03:23  Elapsed:  1431.06 seconds.  The package execution failed.  The step failed.
THANKS.

I don't see any Oracle related error.
Consider posting this on any SSIS forum

Similar Messages

  • Error while loading data into SAP BW using BO Data Services......

    Hello All,
    I have a job to load data from SQL Server to SAP BW. I have followed the steps got from SAP wiki to do this.
    1. I have created an RFC connection between two servers(SAP and BODS Job Server)
    when I schedule and start the job immediately from the SAP BW, i get this error and it aborts the RFC connection....
    "Error while executing the following command:  -sJO return code:238"
    Error message during processing in BI
    Diagnosis
    An error occurred in BI while processing the data. The error is documented in an error message.
    System Response
    A caller 01, 02 or equal to or greater than 20 contains an error meesage.
    Further analysis:
    The error message(s) was (were) sent by:
    Scheduler
    Any help would be appreciated......
    Thanks
    Praveen...

    Hi Praveen,
    I want to know which version of BODS you are using for your development of ETL jobs?.
    If it's BODS 12.2.2.2 then  you will get this type of problems frequently as in BODS 12.2.2.2 version , only two connection
    is possible to create while having RFC between BW and BODS.
    So , i suggest if you are using BODS 12.2.2.2 version  , then upgrade it with BODS 12.2.0.0 with Service PACK  3 and Fix Pack3 .
    AS in BODS 12.2.3.3. we have option of having ten connection parallely at a time which helps in resolving this issues.
    please let me know what is your BODS version and if you have upgraded your BODS to SP3 with FP3 , whether your problem is resolved or not..
    All the best..!!
    Thanks ,
    Shandilya Saurav

  • Error while loading data into 0pur_c03 using 2lis_02_scl

    Hi,
    While trying to load data into 0pur_c03 by using Data Source 2lis_02_scl from R/3 the error message "The material 100 does not exist or not active" is being displayed. I have loaded master data for 0Material and performed change Run also.Still the problem is not resolved.Please suggest in resolving this issue.
    Regards,
    Hari Prasad B.

    I have the same problem in my system and i found that the material XXXXX had movements.....sales documents and more but in certain moment it material was deleted in R3 and it is not loaded into 0MATERIAL infoobject because is marked for deletion....
    If you have this error must activate the load request manually and your infocube can hold the data without any problem.....
    Regards

  • Error while load data into Essbase using ODI

    Hi ,
    I'm getting the following error while loading measures into Essbase using ODI, I used the same LOG nd Error file and file path for all my Dimensions , this worked well but not sure why this is not working for measures....need help.
    File "<string>", line 79, in ?
    com.hyperion.odi.common.ODIHAppException: c:/temp/Log1.log (No such file or directory)
    Thanks
    Venu

    Are you definitely running it against an agent where that path exists.
    Have you tried using a different location and filename, have you restarted the agent to make sure there is not a lock on the file.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Error while loading  data into External table from the flat files

    HI ,
    We have a data load in our project which feeds the oracle external tables with the data from the Flat Files(.bcp files) in unix.
    While loading the data, we are encountering the following error.
    Error occured (Error Code : -29913 and Error Message : ORA-29913: error in executing ODCIEXTTABLEOPEN callout
    ORA-29400: data cartridge error
    KUP-04063: un) while loading data into table_ext
    Please let us know what needs to be done in this case to solve this problem.
    Thanks,
    Kartheek

    Kartheek,
    I used Google (mine still works).... please check those links:
    http://oraclequirks.blogspot.com/2008/07/ora-29400-data-cartridge-error.html
    http://jonathanlewis.wordpress.com/2011/02/15/ora-29913/
    HTH,
    Thierry

  • Error while loading data into clob data type.

    Hi,
    I have created interface to load data from oracle table into oracle table.In target table we have attribute with clob data type. while loading data into clob field ODI gave below error. I use odi 10.1.3.6.0
    java.lang.NumberFormatException: For input string: "4294967295"
         at java.lang.NumberFormatException.forInputString(Unknown Source)
         at java.lang.Integer.parseInt(Unknown Source)
         at java.lang.Integer.parseInt(Unknown Source)
    Let me know if anyone come across and resolved this kind of issue.
    Thanks much,
    Nishit Gajjar

    Mr. Gajjar,
    You didnt mention what KMs you are using ?
    have a read of
    Re: Facing issues while using BLOB
    and
    Load BLOB column in Oracle to Image column in MS SQL Server
    Try again.
    And can you please mark the Correct/Helpful points to the answers too.
    Edited by: actdi on Jan 10, 2012 10:45 AM

  • Getting error while loading  Data into ASO cube by flat file.

    Hi All,
    i am getting this error Essbase error 1270040: Data load buffer[1] does not exist while loading data into ASO cube.
    does anyone have solution.
    Regards,
    VM

    Are you using ODI to load the data or maxl? If you are using an ODI interface, are you using a load rule also which version of essbase and ODI are you using
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Error while loading data into BW (BW as Target) using Data Services

    Hello,
    I'm trying to extract data from SQL Server 2012 and load into BW 7.3 using Data Services. Data Services shows that the job is finished successfully. But, when I go into BW, I'm seeing the below / attached error.
    Error while accessing repository Violation of PRIMARY KEY constraint 'PK__AL_BW_RE_
    Please let me know what this means and  how to fix this. Not sure if I gave the sufficient information. Please let me know if you need any other information.
    Thanks
    Pradeep

    Hi Pradeep,
    Regarding your query please refer below SCN thread for the same issue:
    SCN Thread:
    FIM10 to BW 73- Violation of PRIMARY KEY -table AL_BW_REQUEST
    Error in loading data from BOFC to BW using FIM 10.0
    Thanks,
    Daya

  • Error while loading Data into Essbase using ODI

    Hi,
    I am very new to ODI. I have installed ODI and working on Demo environment only. I havn't done any configuration. I am using Essbase Technology which is coming by default.
    I have created one sample outline in Essbase and a text file to load data into essbase using ODI.
    Following my text file.
    Time     Market     Product     Scenario     Measures     Data
    Jan     USA     Pepsi     Actual     Sales     222
    I am getting the error. I have checked in Operator. It is giving at step 6 i.e. Integration SampleLoad data into essbase.
    Here is the description.
    from com.hyperion.odi.common import ODIConstants
    from com.hyperion.odi.connection import HypAppConnectionFactory
    from java.lang import Class
    from java.lang import Boolean
    from java.sql import *
    from java.util import HashMap
    # Get the select statement on the staging area:
    sql= """select C3_C1 ""Time"",C5_C2 ""Market"",C2_C3 ""product"",C6_C4 ""Scenario"",C1_C5 ""Measures"",C4_C6 ""Data"" from "C$_0Demo_Demo_genData" where      (1=1) """
    srcCx = odiRef.getJDBCConnection("SRC")
    stmt = srcCx.createStatement()
    srcFetchSize=30
    stmt.setFetchSize(srcFetchSize)
    rs = stmt.executeQuery(sql)
    #load the data
    stats = pWriter.loadData(rs)
    #close the database result set, connection
    rs.close()
    stmt.close()
    Please help me to proceed further...

    Hi John,
    Here is the error message in execution tab....
    org.apache.bsf.BSFException: exception from Jython:
    Traceback (innermost last):
    File "<string>", line 20, in ?
    java.sql.SQLException: Unexpected token: TIME in statement [select   C3_C1    ""Time]
         at org.hsqldb.jdbc.jdbcUtil.sqlException(jdbcUtil.java:67)
         at org.hsqldb.jdbc.jdbcStatement.fetchResult(jdbcStatement.java:1598)
         at org.hsqldb.jdbc.jdbcStatement.executeQuery(jdbcStatement.java:194)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
         at org.python.core.PyMethod.__call__(PyMethod.java)
         at org.python.core.PyObject.__call__(PyObject.java)
         at org.python.core.PyInstance.invoke(PyInstance.java)
         at org.python.pycode._pyx4.f$0(<string>:20)
         at org.python.pycode._pyx4.call_function(<string>)
         at org.python.core.PyTableCode.call(PyTableCode.java)
         at org.python.core.PyCode.call(PyCode.java)
         at org.python.core.Py.runCode(Py.java)
         at org.python.core.Py.exec(Py.java)
         at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
         at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
         at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
         at com.sunopsis.dwg.cmd.e.i(e.java)
         at com.sunopsis.dwg.cmd.g.y(g.java)
         at com.sunopsis.dwg.cmd.e.run(e.java)
         at java.lang.Thread.run(Unknown Source)
    java.sql.SQLException: java.sql.SQLException: Unexpected token: TIME in statement [select   C3_C1    ""Time]
         at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
         at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
         at com.sunopsis.dwg.cmd.e.i(e.java)
         at com.sunopsis.dwg.cmd.g.y(g.java)
         at com.sunopsis.dwg.cmd.e.run(e.java)
         at java.lang.Thread.run(Unknown Source)

  • Error while loading data into BW using Datastage tool

    We are extracting data from external source and loading it into SAP BW using Ascential DataStage. Sometimes the job starts on the DataStage side but doesn't really run. I get the following error msg on the BW side:
    S:RSVAR:051 Error opening InfoSource file: ZTESTODS_TRANSACTION.TXT
    Please suggest.
    Thanks,
    RR

    Hi,
    ZTESTODS_TRANSACTION.TXT and ZTESTODS_TRANSACTION.MET are two files in the dsbwconnections directory on the datastage server. The error occurs when a process has a lock on the file.
    If you use PUSH or PULL then you won't see the problem.
    Best regards
    Niels

  • Error while importing data into Oracle 11gr2 with arcsde 9.3.1

    I am getting error while importing the data into oracle 11g r2. We are using arcsde 9.3.1
    It seems to be having some problem with spatial index creation.
    kindly help
    IMP-00017: following statement failed with ORACLE error 29855:
    "CREATE INDEX "A3032_IX1" ON "DGN_POLYLINE_2D" ("SHAPE" ) INDEXTYPE IS "MDS"
    "YS"."SPATIAL_INDEX""
    IMP-00003: ORACLE error 29855 encountered
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-13249: internal error in Spatial index: [mdidxrbd]
    ORA-13249: Error in Spatial index: index build failed
    ORA-13249: Error in spatial index: [mdrcrtxfergm]
    ORA-13249: Error in spatial index: [mdpridxtxfergm]
    ORA-13200: internal error [ROWID:AAAT5pAA9AACIy5AAQ] in spatial indexing.
    ORA-13206: internal error [] while creating the spatial index
    ORA-13033: Invalid data in the SDO_ELEM_INFO_ARRAY in SDO_GEOMETRY object
    ORA-06512: at "MDSYS

    Guys,
    I am also getting the same error and also my issue is like I am not even to analyze for which indexes I am getting error. It does not hve any indx name before error.
    Processing object type DATABASE_EXPORT/SCHEMA/TABLE/INDEX/DOMAIN_INDEX/INDEX
    ORA-39083: Object type INDEX failed to create with error:
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-13249: internal error in Spatial index: [mdidxrbd]
    ORA-13249: Error in Spatial index: index build failed
    ORA-13249: Error in spatial index: [mdrcrtxfergm]
    ORA-13249: Error in spatial index: [mdpridxtxfer]
    ORA-29400: data cartridge error
    ORA-12801: error signaled in parallel query server P000
    ORA-13249: Error in spatial index: [mdpridxtxfergm]
    ORA-13200: internal error [ROWID:AA
    ORA-39083: Object type INDEX failed to create with error:
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-13249: internal error in Spatial index: [mdidxrbd]
    ORA-13249: Error in Spatial index: index build failed
    ORA-13249: Error in spatial index: [mdrcrtxfergm]
    ORA-13249: Error in spatial index: [mdpridxtxfer]
    ORA-29400: data cartridge error
    ORA-12801: error signaled in parallel query server P002
    ORA-13249: Error in spatial index: [mdpridxtxfergm]
    ORA-13200: internal error [ROWID:AA
    ORA-39083: Object type INDEX failed to create with error:
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-13249: internal error in Spatial index: [mdidxrbd]
    ORA-13249: Error in Spatial index: index build failed
    ORA-13249: Error in spatial index: [mdrcrtxfergm]
    ORA-13249: Error in spatial index: [mdpridxtxfer]
    ORA-29400: data cartridge error
    stack cnt....
    How can I find for which indexes it is failing?
    Thank you,
    Myra

  • Error while loading data into Customers InfoCube

    Hi All,
    I am receicing the following error while loading the data into the following InfoCube 0SD_C01.
    The error I am receiving is "LIS Updating is Still Active".
    I am also receiving error similar to "The data is being edited at the time of loading the data request".
    Does anybody have encountered such a situation...
    Please help me out.
    Regards
    YJ

    Hi Dinesh and Paolo,
    The links are very useful.
    I went through the Transactions and found out that the Asynchronous Updating is going on for S001.
    So what are the steps that I can take as a BW Consultant so that the data is loaded into BW.
    Regards
    YJ

  • Error while loading data to ASO database using rules files and buffer id

    Hello all,
    While loading the data to our ASO cube from a data file and using a server rules file, I am getting a warning: "Incorrect Syntax near ['$'] ". But my script no where mentions the usage of $. Also the console throws no error while loading the data. It displays the progress bar 0-100% while the data is being loaded, but actually no data is getting loaded (when retrieval is checked). Also the script is unable to form any log file or error file. Can anyone throw some light what might be the reason behind this kind of data load behaviour.
    Thanks in advance.
    Amit

    is that the real script? I don't see you using any parameter. (That's where $ comes to play). Try a double quote with echo (I never used echo in MaxL)
    Also don't post passwords and server names on a forum.
    Regards
    Celvin
    http://www.orahyplabs.com

  • Error while loading data into hierarchy

    Hi,
    I tried loading the master data from flat file into a hierarchy but its giving me an error message as invalid entry and says hierarchy doesn't exist.Could anyone please guide me how to proceed.
    Thanks,
    Kuldeep.

    Hi,
    1. create a hierarchy,  go to Transfer structure->Hierarchy structure
    ->create hierarchy, put a check of whether it is sorted or time dependent etc.
    2. Assuming it is a flat file load in csv format,selct upload method as IDOC,after that while loading data through infopackage just check that you have selected an appropriate hierarchy name in hierarchy selection tab
    This will hopefully solve your problem.
    Kind Regards,
    Ray

  • Error while loading data into cube

    hi BW gurus,
    when ever i am trying to load data into the cube from flat file after scheduling iam getting short dump in BW system. I checked it in st22 it is giving me a error as exception add_partition_failed. please help me to sort out this problem. If you know the error recovery please give me the answer in detail.
    I will assign points for good answers.

    This is what the note says:
    Symptom
    The process of loading transaction data fails because a new partition cannot be added to the F fact table.The loading process terminates with a short dump.
    Other terms
    RSDU_TABLE_ADD_PARTITION_ORA, RSDU_TABLE_ADD_PARTITION_FAILED, TABART_INCONSITENCY, TSORA, TAORA , CATALOG
    Reason and Prerequisites
    The possible causes are:
    SQL errors when creating the partition
    Inconsistencies in the Data Dictionary control tables TAORA and TSORA
    Solution
    BW 3.0A & BW 3.0B
    In the case of SQL errors:Analyze the SQL code in the system log or short dump and if possible, eliminate the cause. The cause is often a disk space problem or lock situations on the database catalog or, less frequently: the partitioning option in the ORACLE database is not installed.
    The most common cause of the problem is inconsistencies in the TAORA and TSORA tables. As of Support Package 14 for BW 3.0B/Support Package 8 for BW 3.1C, the TABART_INCONSITENCY exception is issued in this case. The reason is almost always missing entries in TSORA for the tablespaces of the DDIM, DFACT and DODS data classes.
    The TAORA table contains the assignment of data classes to data tablespaces and their attributes, for example:
    Tablespace Data class
    DDIM PSAPDIMD ........
    DFACT PSAPFACTD ........
    DODS PSAPODSD .......
    Foreach data tablespace, the TSORA table must contain an entry for the corresponding index tablespace, for example:
    TABSPACE INDSPACE
    PSAPDIMD PSAPDIMD
    PSAPFACTD PSAPFACTD
    PSAPODSD PSAPODSD
    In most cases, these entries are missing and have to be added. See also notes 502989 and 46272.

Maybe you are looking for