Error while loading data into PSA from data source

Hi Experts ,
I am loading purchase order history data from standerd datasource 0SRM_TD_CF into PSA using infopackage.However,whenevr I run infopackage,the call monitor shows the status as yellow.I monitored the process for half an hour but it never ended.I have verified following things from my side.
1.Checked whether datasource is properly replicated into BI system.
2.Checked if source system contains data.
3.Since i am loading transaction data,I have kept update as "initialize delta process"
Please let me know whether I am missing anything.
Regards,
Mandar.

Hi mandarha,
Do the following steps
1)Check the job log in source systems.
2)Check the Data Source in RSA3(Extracter checker) on Source systems side.give DS name press enter then execute,If there is no issue with DS,it will give pop-up with records.If it has any errors first rectify it and then load it again.
3)In details tab of IP,check whether extraction completed or not.
4)Are you running the IP with option "Intialse with data trasfer" or "Without data transfer"
If you running with data transfer and without data selection,usually it will take time based on the volume of historical data.(to find how many records it picks do the 2 step)
Hope this helps
Regards,
Venkatesh.

Similar Messages

Error in loading data into PSA from source system.

Hi Experts !!!
Good morning .
I am trying to load data from SRM source system into BI system.When I execute infopackage,the data is not loaded into PSA and status of the process immediately becomes yellow.After sometime it gets timed out and converts to RED.When I checked the error documentation I found that the iDOCS response was not received from the source system.Detailed error is as below.
System Response
There are idocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further Analysis
Check the TRFC log
you can access this log using the wizard OR menu path "Environment > Transact. RFC> In the source system
However,I was not able to navigate to this path.I think if I can navigate to this path,I can manually push IDOCS from source system to BI system.
Regards,
Mandar.

Hi,
Check the DataSource in RSA3, if it is working fine and able to see the data in RSA3, there is no problem in DS level, then check the Mappings and any routines in BW for that DS, if this is also fine then check the below options.
See Dumps in ST22, SM21 also.
Check RFC Connection between ECC and BW systems, i.e. RSA1-->Source System->Right Click on Source system and Check.
You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract the data from ECC, so add these profiels in BW.
S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
See in SDN
Re: Loading error in the production system
IDOC getting struck at TRFC (SM58)
1.Reorg of table (ARFCSSTATE )
2.Incraesing the resources in the system (no of processes and memory ) , as this issue happens owing to this.
Source system tries to send TRFC to target and if there are no WP's available it will come to Transaction Recorded state, and form here it will not try to send this TRFC.So you have to execute this manually.
Also we can increase the timeout parameter so that it can try few more times to send before actually it comes to recorded state.
Regards,
Suman

Error while loading metadata into planning using ODI

Hi John,
While trying toload members into planning using ODI the following error occurred. Please suggest
java.lang.Exception
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.h.y(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)

Hi John,
While trying toload members into planning using ODI the following error occurred. Please suggest
java.lang.Exception
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.h.y(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)

Error while staging materials into PSA

Dear experts,
in the following situation i try to stage materials of a production material request into my PSA. (Yes i am using the advanced production integration of EWM 9.2 )
When i am executing transaction /SCWM/STAGE the following protocol is given:
Does anyone know, what kind of configuration is missing ? Or other ideas what causes this error has ?
Best regards
Eike

Hi irfan,
the WT creating error just exists because of the stock determination error..
Your tip to check the availability groups, was really good. Here are my configurations:
Defined availability Groups:
The non-location-dependent stock type:
The Stock Type configuration:
And the configuration of the storage type which my bin of the PSA belongs to:
Do you have any idea what else could be the mistake ? Or is something wrong with my configurations?
Kind regards

Error while loading metada into HFM Application

Can any one help me out from this stage in hfm.I am getting these errors frequently.Please send your comments on this .
Metadata Scan started at 21:41:36
PASS I - Analyzing Section Headers
PASS II - Validating member names and hierarchies
Scenario
Error: Member defined but not referenced in the hierarchy
Scenario
ActualEntity
Account
Custom1
Custom2
Custom3
Custom4
Currency
Scan ended at: 21:41:36
Elapsed time: 00:00:00

You have a scenario which was defined, but is not attached to anything in the hierarchy section. Using the Win32 metadata manager, open the scenario dimension, and in the list tab check the box that shows orphans. Once you see which member isn't attached to the hierarchy, drag it where you want it, save and load the file.
--Chris

Error while loading sdoapi into server

hi,
i tried to load the latest sdoapi into an oracle 9i server using
loadjava -r -resolver "((* SCOTT) ((* PUBLIC))" -u scott/tiger@gdfsuite -v d:\apps\JDeveloper\jdk\lib\sdoapi.zip
i think that the follwing error causes the failing of the resolve process
ORA-29545:badly formed class: at offset 429 of oracle.sdoapi.adapter.SDOGeometry.createPoint expecting
a class-oracle.sql.Datum but encountered a initObj.
at offset 464 of oracle.sdoapi.adapter.SDOGeometry.createPoint expecting a class-oracle.sql.Datum but encountered a init
Obj.
at offset 489 of oracle.sdoapi.adapter.SDOGeometry.createPoint expecting a class-oracle.sql.Datum but encountered a init
Obj.
at offset 706 of oracle.sdoapi.adapter.SDOGeometry.createPoint expecting a class-oracle.sql.Datum but encountered a init
Obj.
at offset 713 of oracle.sdoapi.adapter.SDOGeometry.createPoint expecting a class-oracle.sql.Datum but encountered a init
Obj.
another error is
errors : class oracle/sdoapi/OraSpatialManager
ORA-29534: Referenziertes Objekt SCOTT.oracle/sql/ARRAY konnte nicht aufgelwst werden
can anyone help me? if you need the complete trace i can send it.
regards matthias

FYI - I don't know of anyone who has tried to load the api into the server.

Error while load data into Essbase using ODI

Hi ,
I'm getting the following error while loading measures into Essbase using ODI, I used the same LOG nd Error file and file path for all my Dimensions , this worked well but not sure why this is not working for measures....need help.
File "<string>", line 79, in ?
com.hyperion.odi.common.ODIHAppException: c:/temp/Log1.log (No such file or directory)
Thanks
Venu

Are you definitely running it against an agent where that path exists.
Have you tried using a different location and filename, have you restarted the agent to make sure there is not a lock on the file.
Cheers
John
http://john-goodwin.blogspot.com/

Getting Duplicate data Records error while loading the Master data.

Hi All,
We are getting Duplicate data Records error while loading the Profit centre Master data. Master data contains time dependent attributes.
the load is direct update. So i made it red and tried to reloaded from PSA even though it is throwing same error.
I checked in PSA. Showing red which records have same Profit centre.
Could any one give us any suggestions to resolve the issues please.
Thanks & Regards,
Raju

Hi Raju,
I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
Hope this helps you.
Thanks & Regards,
Nithin Reddy.

Random Records are being skipped while uploading data in PSA from CSV File

Hi Experts,
I am facing issue in data uploading in PSA through CSV file, Random Records are being skipped while uploading data in PSA.
First Load
We have flat file (.txt in CSV format), which contains 380240 Records.
We are uploading the flat file data into PSA from Application Server. But it uploads Only 380235 records, 5 Records are being skipped.
Second Load
We have re-generated same file next day, which contains same No of Records (380240), but this time it uploads Only 380233 records, 7 Records are being skipped.
We found 1 skipped record (based on key columns combination, by cross verifying from source and PSA table) from First load. But same records (combination of key column) is available in second load. It means same records are not being skipped every time.
Earlier (5 months ago) , We have loaded 641190 Records from flat file in same PSA and all records (641190) were uploaded successfully.
There is no change is Source, PSA and flat file structure.
Thanks & Regards
Bijendra

Hi Bijendra,
Please check in the file if at the begining if it has got any excape sign then that record may be skipped so the records may be mssing
Please check the excape sign like ; if they are present at the beginign that recor entirely will be skipped.
Regards
vamsi

Master data error while loading data

Dear Masters
Im getting below error while loading delta update for master data(Attr) through infopackage to only PSA. Im in BI 7.0
When I checked Error message, Im getting 2 errors. They are
1) Update mode R is not supported by the extraction API
2) Error in source system.
I checked source system is fine. im getting data also in RSA3
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the
Could you please help me to resolve this issue.

Process chains might fail if the data source is not in sync between the source and the BW system. In such a case, go to the 'Source Systems' in transaction RSA1, find the datasource, right click and select 'Replicate Datasources'. Once this is done, the transfer structure needs to be activated as well. To do this in production, run the report RS_TRANSTRU_ACTIVATE_ALL with the source system name and the infosource name. This will activate the transfer structure.
NOTE: For master data using direct upload the infosource name is the name of the info object itself.

While loading master data into PSA, the eorror is 'Error from PSA"

Hi All,
While loading master data into PSA, the eorror is 'Error from PSA"
Could you anybody please help in this reagard.
Thanx,
Sridhar.

Hi rakesh,
May be IDOCs not processed completely,
Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
Cheers
Raj

Error while loading the data from PSA to Data Target

Hi to all,
     I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
      Request IDoc : Application document posted
      Info IDoc 2 : Application document posted
      Info IDoc 1 : Application document posted
      Info IDoc 4 : Application document posted
      Info IDoc 3 : Application document posted
      Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
      Update PSA ( 2462 Records posted ) : No errors
      Transfer Rules ( 2462 -> 2462 Records ) : No errors
      Update rules ( 2462 -> 2462 Records ) : No errors
      Update ( 0 new / 0 changed ) : Errors occurred
      Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
Saran

Hi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

Error While loading the data into PSA

Hi Experts,
       I have already loaded the data into my cube. But it doesn't have values for some fields. So again i modified the data in the flat file and tried to load them into PSA. But while starting the Info Package, I got an error saying that,
"Check Load from InfoSource
Created       YOKYY on   20.02.2008   12:44:33
Check Load from InfoSource , Packet IP_DS_C11
Please execute the mail for additional information.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Pls help me in this......
With Regards,
Yokesh.

Hi,
After editing the file did you save the file and close it.
This error may come if your file was open at the time of request.
Also did you check the file path settings.
If everything is correct try saving the infopackage once and loading again.
Thanks,
JituK

Urgent : Error while loading data from PSA to DSO

Hi,
I am working on 7.0.
When i look for data into PSA then i have 1 date field which is containing data in proper date format. This date field is mapped with 0CALMONTH & 0CALYEAR for which i have written routine and directly assigned to 0DOC_DATE .
I have written a start routine to do some modifications in SOURCE_PACKAGE.
But When i am loading data from PSA to DSO its giving below error:
" Exception wrong_date ; see long text RSTRAN 303
Diagnosis
An exception wrong_date was raised while executing function module
RST_TOBJ_TO_DERIVED_TOBJ .
System Response
Processing the corresponding record has been terminated.
Procedure
To analyze the cause, set a break point in the program of the
transformation at the call point of function module
RST_TOBJ_TO_DERIVED_TOBJ . Simulate the data transfer process to
investigate the cause. "
I am not getting why this error is coming up
pls guide me !!

you can map the code to DOC_DATE .
The code is used to read from any date and convert that into Fiscal year/period.
Try this code.
data: l_fiscyear type t009b-bdatj.
call function 'FISCPER_FROM_CALMONTH_CALC'
exporting
id_date = COMM_STRUCTURE-doc_date
iv_periv = 'V9'
importing
ev_fiscyear = l_fiscyear.
result value of the routine
RESULT = l_fiscyear.

BI 7.0 - Error while loading data from R3 to PSA

Hi,
I transported Master Data ATTR/TEXT object from DEV to QA (BI 7.0 NW 2004s); and getting the following error while loading the data from R3 in to PSA using the InfoPackage.
Any clue to resolve this issue is appreciated.
Monitor - STATUS tab:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Monitor - Details Tab:
Extraction (messages): Errors occurred
Error occurred in the data selection
Request IDoc : Application document not posted
Error Message:
Diagnosis
In the source system, there is no transfer structure available for
    InfoSource 0ACTIONTYPE_TEXT .
System Response
The data transfer is terminated.
Procedure
In the Administrator Workbench, regenerate from this source system the
    transfer structure for InfoSource 0COMPANY_TEXT .
Thanks,

Hi,
Pl try the below
The l_dta data target that you want to load is an InfoObject (master data or text
table).
You must declare this for the InfoProvider in Transaction RSD1.
You do this on the 'Master Data/Text' tab by assigning any InfoArea to the InfoObject.
The InfoProvider (that is, this InfoObject) is then displayed below this InfoArea in
the InfoProvider tree.
Rregards,
Senthil

Error while loading data into PSA from data source

Similar Messages

Maybe you are looking for