Error while loading data on 0LIV_DS01 ODS through DTP

Hi Expert,
I am trying to load data on 0LIV_DS01 ODS through 2LIS_06_INV datasource data is comming correctly in PSA
while i'm trying to load data on ODS through DTP is runing properly till 9th package but at 10th package it showing me error
like "Exception condition "CTT_NOT_FOUND" raised"
Error Analysis
"A RAISE statement in the program "SAPLRSW0" raised the exception
condition "CTT_NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated."
please tell me how i rectify the error....
Thanks and Regards
Lalit Kumar

Hi,
This error has to do something with Currency Conversion.
While loading from the DSO to the cube, do you have any currency conversions?
Please look at the below threads:
Loading error in 0LIV_DS01
Raise Exception error: CTT_NOT_FOUND
Hope this helps.
Regards
Vishal

Similar Messages

Error while loading Data in HFM application through ODI

Hello All,
I am performing a integration from source(Flat file) to HFM application I have created a Integration to it and while loading the data i get the following error:-
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 3, in <module>
    at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:240)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
com.hyperion.odi.common.ODIHAppException: com.hyperion.odi.common.ODIHAppException: Properties [CLEAR_ALL_METADATA_BEFORE_LOAD, REPLACE_MODE] are mandatory.
    at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
    at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
    at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)
    at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
    at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
    at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
    at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)
    at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)
    at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
    at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
    at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
    at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
    at java.lang.Thread.run(Thread.java:662)
Caused by: Traceback (most recent call last):
File "<string>", line 3, in <module>
    at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:240)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
com.hyperion.odi.common.ODIHAppException: com.hyperion.odi.common.ODIHAppException: Properties [CLEAR_ALL_METADATA_BEFORE_LOAD, REPLACE_MODE] are mandatory.
    at org.python.core.PyException.fillInStackTrace(PyException.java:70)
    at java.lang.Throwable.<init>(Throwable.java:181)
    at java.lang.Exception.<init>(Exception.java:29)
    at java.lang.RuntimeException.<init>(RuntimeException.java:32)
    at org.python.core.PyException.<init>(PyException.java:46)
    at org.python.core.PyException.<init>(PyException.java:43)
    at org.python.core.Py.JavaError(Py.java:455)
    at org.python.core.Py.JavaError(Py.java:448)
    at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:177)
    at org.python.core.PyObject.__call__(PyObject.java:355)
    at org.python.core.PyMethod.__call__(PyMethod.java:215)
    at org.python.core.PyMethod.instancemethod___call__(PyMethod.java:221)
    at org.python.core.PyMethod.__call__(PyMethod.java:206)
    at org.python.core.PyObject.__call__(PyObject.java:397)
    at org.python.core.PyObject.__call__(PyObject.java:401)
    at org.python.pycode._pyx15.f$0(<string>:6)
    at org.python.pycode._pyx15.call_function(<string>)
    at org.python.core.PyTableCode.call(PyTableCode.java:165)
    at org.python.core.PyCode.call(PyCode.java:18)
    at org.python.core.Py.runCode(Py.java:1204)
    at org.python.core.Py.exec(Py.java:1248)
    at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:172)
    at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
    ... 19 more
Caused by: com.hyperion.odi.common.ODIHAppException: Properties [CLEAR_ALL_METADATA_BEFORE_LOAD, REPLACE_MODE] are mandatory.
    at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:240)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:175)
    ... 33 more
Caused by: com.hyperion.odi.common.ODIHAppException: Properties [CLEAR_ALL_METADATA_BEFORE_LOAD, REPLACE_MODE] are mandatory.
    at com.hyperion.odi.hfm.ODIHFMUtil.validateRequiredProperties(ODIHFMUtil.java:87)
    at com.hyperion.odi.hfm.ODIHFMMetadataLoader$OptionsMetadataLoad.validate(ODIHFMMetadataLoader.java:66)
    at com.hyperion.odi.hfm.ODIHFMMetadataLoader.validateOptions(ODIHFMMetadataLoader.java:188)
    at com.hyperion.odi.hfm.ODIHFMAppStatement.validateLoadOptions(ODIHFMAppStatement.java:168)
    at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:195)
    ... 38 more
Any help appreciated
Thanks,
Pratik

LKM looks fine. Sorry it was my bad the "data" at the end was not visible and you are right its IKM for integration
Log file that you have provided talks about these parameters but I doubt these are related to data
I was going through the link and it takes about the parameters CLEAR_ALL_METADATA_BEFORE_LOAD, REPLACE_MODE but they are related to metadata
Oracle Hyperion Financial Management
I have no idea. Will keep posted if I get to know anything
HTH
Amarnath
ORACLE | Essbase

Error while loading data from one ODS to anther ODS

Hi all,
while loading the data from one ODS to another ODS, we are getting error message - Error: No match found in target. No Space on ODS.
I have done a runstat on these tables of the ODS.. but the issue repeated.
Can anyone tell how do we solve this issue.

Check if you get any other Dump message in ST22 to see if it is due to some space availability in the DSO or underlying tables.
Or Post in detail if any other errore message is available.

Transformation Rule: Error while loading from PSA to ODS using DTP

Hi Experts,
I am trying to load data from PSA to ODS using DTP. For about 101 records I get the following error:
"Runtime error while executing rule -> see long text     RSTRAN     301"
On further looking at the long text:
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    Overflow converting from ''
    The error was triggered at the following point in the program:
    GP4808B5A4QZRB6KTPVU57SZ98Z 3542
System Response
    Processing the data record has been terminated.
Procedure
      The following additional information is included in the higher-level
     node of the monitor:
     o   Transformation ID
     o   Data record number of the source record
     o   Number and name of the rule which produced the error
Procedure for System Administration
When looking at the detail:
Error Location: Object Type    TRFN
Error Location: Object Name    06BOK6W69BGQJR41BXXPE8EMPP00G6HF
Error Location: Operation Type DIRECT
Error Location: Operation Name
Error Location: Operation ID   00177 0000
Error Severity                 100
Original Record: Segment       0001
Original Record: Number        2
Pls can anyone help in deducing and pointing this error to the exact spot in the transformation rule
Thanks & Regards,
Raj

Jerome,
The same issue.
Here are some fields which are different in terms of length when mapped in transformation rules
ODS                    |Data Source
PROD_CATEG     CHAR32           |Category_GUID      RAW 16
CRM_QTYEXP     INT4          |EXPONENT      INT2
CRM_EXCRAT     FLTP16          |EXCHG_RATE     Dec 9
CRM_GWEIGH     QUAN 17, 3     |Gross_Weight     QUAN 15
NWEIGH          QUAN 17, 3     |Net_Weight     QUAN 15
CRMLREQDAT     DATS 8          |REQ_DLV_DATE     Dec 15
The difference is either some dats field are mapped to decimal, or the char 32 field is mapped to raw 16 OR Calweek, Calmonth is mapped to Calday
Both mostly all the ods field size is greater than the input source field.
Thanks
Raj

Error while loading data from 0FI_TX_4 to ODS

Dear Friends,
One of our proccess chain getting error since a week, every day with same error while loading data from R3 data source 0FI_TX_4 to ODS.
Short dump is raised in R3 system.
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"SAPLBWFIR" or "LBWFIRU13"
"BWFIR_READ_BSET_CPUDT_DATA"
ORA-01555
The number of records are below 10000 only.
All other chains are OK.
we have already searched SDN and Notes...and applied below solution, but still no use
Increase the size of all the roll back segments
Increase number of REDO logs
Decrease the number of records per data packet
Any more suggessions please ??
Thanks
Tony

How are you telling that no. of records are below 10000 .Have you checked the no.of records in PSA???
Now ,I tell you something which I had done for this error .I increased the Package size such that whole data gets transferred in single data package.Please make the package size as large as possible so that all the data can be processed in single package.
I know you have read so many threads on the same but what I am suggesting is what I have done and successfully rectified this issue.
regards,
rocks

Error while loading data to ODS

Hello BW folks ,
I am getting an error while loading data to ODS from R/3 data source.
The error message is " Error in PSA".
We have deleted yesterday data from PSA for the related infosource/data source successfully .
Since then this error is occuring. Previously data upload was successful.
In Detail tab of monitor we are getting error message in Request option ( red Mark )
and the same request is not going to R/3 .
<b>The related Job itself is not present in R/3 .</b>
This looks very strange and new to me .
Could anyone help me in rectifying this issue ?
Thanks in Advance.
Best Regards ,
Amol.

Hello All,
Thanks for reply.
I tried to replicate the data source once again and activate the transfer rules in BW Production by running program in SE38 = RS_TRANS* activate all tranfer sturctures , then I got an error message that one infoobject is added to transfer rules in BW Production .
But interestingly the same Transfer rules do not have this infoobject in BW Development server . So I create once again a request for Transfer rules in Dev and transported it to BW production.
and This solved the problem
The error message in Monitor was " Error in PSA " and then request itself was not going to R/3 . But the real issue was with Transfer rules. So after rectifying it we have solved the problem of data upload.
Best Regards ,
Amol Kulkarni.

Error while loading data from a file on application server

Hi all,
Facing an error while loading data from a flat file.
Error 'The argument '##yyyymmdd;@##' cannot be interpreted as a number ' while assigning character.
I changed the format of date fields (tried with number,general,date(International))in the xls. But i still get the same error.Did check all the data types in Data source all the fields are dats.
Can you please tell me what could be the problem?
Thank you all,
Praveen

Hi all,
As far as my first question i got through it but i had one more field in my flat file while actually is a time stamp, but in my flat file i have a data in this format
10/21/2006 5:11:48 AM which i need to change to 10/21/2006
one more note is i have some of the fields as NULL in this field
Last Updated Date
10/21/2006 5:11:48 AM
10/21/2006 5:11:48 AM
NULL
NULL
10/21/2006 5:11:48 AM
NULL
I want to display the values as 10/21/2006 and NULL as it is.
Please let me know if we have a conversion routine in datasource which can solve my problem.
Regards,
Praveen

10)example of errors while loading data and how do u resolve them?

)example of errors while loading data and how do u resolve them?

hai ram reddy this is ramprasad reddy....u can get this type of most commen errors....like below
As the frequent failures and errors , there is no fixed reason for the load to be fail , if you want it for the interview perspective I would answer it in this way.
a) Loads can be failed due to the invalid characters
b) Can be because of the deadlock in the system
c) Can be becuase of previuos load failure , if the load is dependant on other loads
d) Can be because of erreneous records
e) Can be because of RFC connections.....(sol: raise the ticket to BASIS team to provide the connection)
f)can be coz of missing master data.
g)can be coz of no data found in the source system.
h)Time stamp error........(sol: activate the data source and replicate the data source and load)
i)Short dump error.........(sol: delete the request and load once again)
j)Data locking when loading in parallel.
k)ODS activation failures.
l)No SID found........(sol: should load masterdata before transaction data)

Error While loading data for LIS InfoSources.

Hi All,
I am repeatedly receiving load failure errors while loading data using 2lis_01_s001 (This is the case with all the InfoSources).
The error message is:
An error occurred in the source system.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
in our Quality system, we disabled the LIS Updation to No Update(R3) and loaded data and then again changed the Update Mode for No Updating to Asynchronous Update(R3). But now we are doing dataloading in Production. How to proceed. Should we have to disable the LIS Updating whenever we have to load the loads from R3 to BW.
Regards
Jay

Hi Jayanthy,
Pls. check the order of the fields in the two set up tables for the S001 structure. The order of fields in both the tables should be the same.
You can see the structure in the TCode - SE11.
If the order is different, then you bneed to ask the BASIS person to change the order so that the order of fields in both the setup tables is same. This should fix the issue.
Thanks,
Raj

Error while loading data from DS into cube

Hello All
I am getting the below error while loading data from Data source to the cube.
Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20070331
Wht am i suppose to do?
Need ur input in this regard.
Regards
Rohit

Hi
Simply map 0calday to 0fiscper(you already done it)..You might have forgotten to map fiscal year variant in update rules....if it comes from souce,just map it..if it won't comes from source...make it as constant in update rules and give value..
If your business is April to March make it as 'V3'
If your business is January to Decemeber make it as 'K4'..
activate your update rules delete old data and upload again....
Hope it helps
Thanks
Teja

Error while loading data to ODS in BI7

Getting such following errors when loading data to ODS through DTP(Data Transfer Process) in BI7.
Runtime error while executing rule -> see long text RSTRAN
Record filtered because records with the same key contain errors     RSM2
and many so on...
source system is ok no problem with the connection part.
plz help.

Hi Anup.
Probably your records are not Unique, while you have told the system they should be.
Try to move a discrimination characteristic from data fileds to key fileds.
Or
Try to set the "duplicate reords allowed" setting in your datasource (tab "General Settings" Delivery of Duplicate Data Recs. = Allowed)
Udo

Error while Loading data through .csv file

Hi,
I am getting below date error when loading data through into Olap tables through .csv file.
Data stored in .csv is 20071113121100.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TE_7007 Transformation Evaluation Error [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')]
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11132 Transformation [Exp_FILE_CHNL_TYPE] had an error evaluating output column [CREATED_ON_DT_OUT]. Error message is [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')].
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11019 There is an error in the port [CREATED_ON_DT_OUT]: The default value for the port is set to: ERROR(<<Expression Error>> [ERROR]: transformation error
... nl:ERROR(u:'transformation error')).
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11021 An error occurred moving data from the transformation Exp_FILE_CHNL_TYPE: to the transformation W_CHNL_TYPE_DS.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> CMN_1086 Exp_FILE_CHNL_TYPE: Number of errors exceeded threshold [1].
Any help is greatly appreciated.
Thanks,
Poojak

1) Wrong format, you wont get much support loading OLAP cubes in here I think.
2) Has your CSV file been anywhere near excel by chance the conversion of 20071113121100 to 2.00711E+13 looks very much like what I see when Excel has an invalid number mask / precision specified for a cell.
*** We are using EBS. File was already generated by consultants through SQL query. Getting error while loading though Informatica. Target table is setup as date datatype and source is String(19).
Expression in Informatica is setup as below.
IIF(ISNULL(CREATED_ON_DT), NULL, TO_DATE(CREATED_ON_DT, 'YYYYMMDDHH24MISS'))
Thanks,
Poojak

Short Dump error while loading data from R/3 to ODS

Hello,
while trying to load data into the ODS from R/3 I get the following short dump error message. How do I carry out step 1 in the below procedure. Where do i find the Activate Function. And idea?
Thanks,
SD
                                                                                Diagnosis
Form routine CONVERT_ITAB_RFC is incorrect in transfer program
     GP4C0LOLZ6OQ70V8JR365GWNW3K .
System Response
The IDoc processing was terminated and indicated as incorrect. The IDoc
     can be reimported at any time.
Procedure
1. Go to the transfer rule maintenance for your InfoSource
         ZFIN_TR_FLQITEM_FI and the source system DA_M_10 and regenerate the
         transfer program using the function Activate. Remove possible syntax
         errors on the basis of your conversion routines.
2. Restart the processing of this IDoc.
3. If the error occurs again search for SAPNet R/3 notes, and create a
        problem message if necessary.
Edited by: Sebastian D'Souza on Jan 13, 2009 3:22 PM

Hi.......
Goto RSA1>> then to source system tab (on left side) >> double click on the desired source system...........Then on the right side you have the Datasource tree..........there search the datasource and activate.......Also u can Replicate the datasource again.......and activate the Transfer rules using the program : RS_TRANSTRU_ACTIVATE_ALL
After this operation when come back to source system (R/3).........I think the error log line will be disappeared from SM58......... Then repeat the load.........
Also u can try to Activate the infosource once...........in RSA1.........before repeating the load....
Hope this helps......
Regards,
Debjani....

Error while loading data into ODS

Hi we have BI for NW04S and CRM4.0. While loading data for a CRM ODS , I have received a error message which I never seen before. Yesterdaya data load was smooth and I only see issue while loading data today
The error message in the monitor is as follows
"Port 'A000000003' does not exists in the table of Port Description' ( message ID E0, NO 31 ).
have anybody encountered this.
Thanks
Arun

Thanks Marc,
we found the table EDIPOA and found that the port that is missing. It seems that the enytry( row) for our CRM system is missing which has this port as a field in this table.
Not sure whether to manually populate it or it's part of the source system repair etc.
please let me know
Thanks
Arunava

Error while loading data into hierarchy

Hi,
I tried loading the master data from flat file into a hierarchy but its giving me an error message as invalid entry and says hierarchy doesn't exist.Could anyone please guide me how to proceed.
Thanks,
Kuldeep.

Hi,
1. create a hierarchy, go to Transfer structure->Hierarchy structure
->create hierarchy, put a check of whether it is sorted or time dependent etc.
2. Assuming it is a flat file load in csv format,selct upload method as IDOC,after that while loading data through infopackage just check that you have selected an appropriate hierarchy name in hierarchy selection tab
This will hopefully solve your problem.
Kind Regards,
Ray

Error while loading data on 0LIV_DS01 ODS through DTP

Similar Messages

Maybe you are looking for