Error while loading data on to the cube : Incompatible rule file.

Hi,
I am trying to load data on to essbase cube from a data file. I have a rule file on the cube already, and I am getting the following error while loading the data. Is there any problem with the rules file?
SEVERE: Cannot begin data load. Essbase Error(1019058): Incompatible rule file. Duplicate member name rule file is used against unique name database.
com.essbase.api.base.EssException: Cannot begin data load. Essbase Error(1019058): Incompatible rule file. Duplicate member name rule file is used against unique name database.
     at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect.essMainBeginDataload(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin.essMainBeginDataload(Unknown Source)
     at com.essbase.api.datasource.EssCube.beginDataload(Unknown Source)
     at grid.BudgetDataLoad.main(BudgetDataLoad.java:85)
Error: Cannot begin data load. Essbase Error(1019058): Incompatible rule file. Duplicate member name rule file is used against unique name database.
Feb 7, 2012 3:13:37 PM com.hyperion.dsf.server.framework.BaseLogger writeException
SEVERE: Cannot Load buffer term. Essbase Error(1270040): Data load buffer [3] does not exist
com.essbase.api.base.EssException: Cannot Load buffer term. Essbase Error(1270040): Data load buffer [3] does not exist
     at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect.essMainLoadBufferTerm(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin.essMainLoadBufferTerm(Unknown Source)
     at com.essbase.api.datasource.EssCube.loadBufferTerm(Unknown Source)
     at grid.BudgetDataLoad.main(BudgetDataLoad.java:114)
Error: Cannot Load buffer term. Essbase Error(1270040): Data load buffer [3] does not exist
Thanks,
Santhosh

" Incompatible rule file. Duplicate member name rule file is used against unique name database."
I am just guessing here as I have never used the duplicate name functionality in Essbase, nor do I remember which versions it was in. However with that said I think your answer is in your error message.
Just guessing again.... It appears that your rule file is set to allow duplicate member names while your database is not. With that information in hand (given to you in the error message) I would start to explore that.

Similar Messages

Error while loading data from DS into cube

Hello All
I am getting the below error while loading data from Data source to the cube.
Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20070331
Wht am i suppose to do?
Need ur input in this regard.
Regards
Rohit

Hi
Simply map 0calday to 0fiscper(you already done it)..You might have forgotten to map fiscal year variant in update rules....if it comes from souce,just map it..if it won't comes from source...make it as constant in update rules and give value..
If your business is April to March make it as 'V3'
If your business is January to Decemeber make it as 'K4'..
activate your update rules delete old data and upload again....
Hope it helps
Thanks
Teja

Error while loading data from ODS to CUBE.

Hi friends,
When l am loading data from ODS to Cube with help of data mart, I am getting error in QA system , IN DM system ,every thing went well.IF i see the detail tab in monitor under Processing .
Its is showing like this .
Transfer Rules : Missing Massage.
Update PSA : missing massage.
Processing end : missing message.
I have checked the coding in update rules, everything is ok.
Plz any inputs.
hari
Message was edited by:
hari reddy

Might means that IDocs flow is not defined properly in your QA system for myself-SourceSystem.
Regards,
Vitaliy

Error while loading data from DSO to Cube

Dear Experts,
I have change update routines of the update rule for DSO & update rule between DSO & cube. when i uploading data in DSO , working fine. But when uploading from DSO to cube , it giving error.
Error Message :
DataSource 8ZDSO_ABB does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 30.09.2010 14:05:17.
The time stamp in the BW system is 09.05.2008 16:41:10.
I executed program RS_TRANSTRU_ACTIVATE_ALL , still giving same error.
Regards,
Anand Mehrotra.

Dear Experts,
Thanks for help.Problem solved.
Regards,
Anand Mehrotra.

Error while Loading data through .csv file

Hi,
I am getting below date error when loading data through into Olap tables through .csv file.
Data stored in .csv is 20071113121100.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TE_7007 Transformation Evaluation Error [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')]
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11132 Transformation [Exp_FILE_CHNL_TYPE] had an error evaluating output column [CREATED_ON_DT_OUT]. Error message is [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')].
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11019 There is an error in the port [CREATED_ON_DT_OUT]: The default value for the port is set to: ERROR(<<Expression Error>> [ERROR]: transformation error
... nl:ERROR(u:'transformation error')).
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11021 An error occurred moving data from the transformation Exp_FILE_CHNL_TYPE: to the transformation W_CHNL_TYPE_DS.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> CMN_1086 Exp_FILE_CHNL_TYPE: Number of errors exceeded threshold [1].
Any help is greatly appreciated.
Thanks,
Poojak

1) Wrong format, you wont get much support loading OLAP cubes in here I think.
2) Has your CSV file been anywhere near excel by chance the conversion of 20071113121100 to 2.00711E+13 looks very much like what I see when Excel has an invalid number mask / precision specified for a cell.
*** We are using EBS. File was already generated by consultants through SQL query. Getting error while loading though Informatica. Target table is setup as date datatype and source is String(19).
Expression in Informatica is setup as below.
IIF(ISNULL(CREATED_ON_DT), NULL, TO_DATE(CREATED_ON_DT, 'YYYYMMDDHH24MISS'))
Thanks,
Poojak

Error While loading data for LIS InfoSources.

Hi All,
I am repeatedly receiving load failure errors while loading data using 2lis_01_s001 (This is the case with all the InfoSources).
The error message is:
An error occurred in the source system.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
in our Quality system, we disabled the LIS Updation to No Update(R3) and loaded data and then again changed the Update Mode for No Updating to Asynchronous Update(R3). But now we are doing dataloading in Production. How to proceed. Should we have to disable the LIS Updating whenever we have to load the loads from R3 to BW.
Regards
Jay

Hi Jayanthy,
Pls. check the order of the fields in the two set up tables for the S001 structure. The order of fields in both the tables should be the same.
You can see the structure in the TCode - SE11.
If the order is different, then you bneed to ask the BASIS person to change the order so that the order of fields in both the setup tables is same. This should fix the issue.
Thanks,
Raj

Error while loading data from a file on application server

Hi all,
Facing an error while loading data from a flat file.
Error 'The argument '##yyyymmdd;@##' cannot be interpreted as a number ' while assigning character.
I changed the format of date fields (tried with number,general,date(International))in the xls. But i still get the same error.Did check all the data types in Data source all the fields are dats.
Can you please tell me what could be the problem?
Thank you all,
Praveen

Hi all,
As far as my first question i got through it but i had one more field in my flat file while actually is a time stamp, but in my flat file i have a data in this format
10/21/2006 5:11:48 AM which i need to change to 10/21/2006
one more note is i have some of the fields as NULL in this field
Last Updated Date
10/21/2006 5:11:48 AM
10/21/2006 5:11:48 AM
NULL
NULL
10/21/2006 5:11:48 AM
NULL
I want to display the values as 10/21/2006 and NULL as it is.
Please let me know if we have a conversion routine in datasource which can solve my problem.
Regards,
Praveen

Error while loading data from 0FI_TX_4 to ODS

Dear Friends,
One of our proccess chain getting error since a week, every day with same error while loading data from R3 data source 0FI_TX_4 to ODS.
Short dump is raised in R3 system.
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"SAPLBWFIR" or "LBWFIRU13"
"BWFIR_READ_BSET_CPUDT_DATA"
ORA-01555
The number of records are below 10000 only.
All other chains are OK.
we have already searched SDN and Notes...and applied below solution, but still no use
Increase the size of all the roll back segments
Increase number of REDO logs
Decrease the number of records per data packet
Any more suggessions please ??
Thanks
Tony

How are you telling that no. of records are below 10000 .Have you checked the no.of records in PSA???
Now ,I tell you something which I had done for this error .I increased the Package size such that whole data gets transferred in single data package.Please make the package size as large as possible so that all the data can be processed in single package.
I know you have read so many threads on the same but what I am suggesting is what I have done and successfully rectified this issue.
regards,
rocks

Error while loading data to ODS

Hello BW folks ,
I am getting an error while loading data to ODS from R/3 data source.
The error message is " Error in PSA".
We have deleted yesterday data from PSA for the related infosource/data source successfully .
Since then this error is occuring. Previously data upload was successful.
In Detail tab of monitor we are getting error message in Request option ( red Mark )
and the same request is not going to R/3 .
<b>The related Job itself is not present in R/3 .</b>
This looks very strange and new to me .
Could anyone help me in rectifying this issue ?
Thanks in Advance.
Best Regards ,
Amol.

Hello All,
Thanks for reply.
I tried to replicate the data source once again and activate the transfer rules in BW Production by running program in SE38 = RS_TRANS* activate all tranfer sturctures , then I got an error message that one infoobject is added to transfer rules in BW Production .
But interestingly the same Transfer rules do not have this infoobject in BW Development server . So I create once again a request for Transfer rules in Dev and transported it to BW production.
and This solved the problem
The error message in Monitor was " Error in PSA " and then request itself was not going to R/3 . But the real issue was with Transfer rules. So after rectifying it we have solved the problem of data upload.
Best Regards ,
Amol Kulkarni.

10)example of errors while loading data and how do u resolve them?

)example of errors while loading data and how do u resolve them?

hai ram reddy this is ramprasad reddy....u can get this type of most commen errors....like below
As the frequent failures and errors , there is no fixed reason for the load to be fail , if you want it for the interview perspective I would answer it in this way.
a) Loads can be failed due to the invalid characters
b) Can be because of the deadlock in the system
c) Can be becuase of previuos load failure , if the load is dependant on other loads
d) Can be because of erreneous records
e) Can be because of RFC connections.....(sol: raise the ticket to BASIS team to provide the connection)
f)can be coz of missing master data.
g)can be coz of no data found in the source system.
h)Time stamp error........(sol: activate the data source and replicate the data source and load)
i)Short dump error.........(sol: delete the request and load once again)
j)Data locking when loading in parallel.
k)ODS activation failures.
l)No SID found........(sol: should load masterdata before transaction data)

There was an error while writing data back to the server: Failed to commit objects to server : Duplicate object name in the same folder.

Post Author: dmface15
CA Forum: Administration
I am working in a new enviorment and i am trying to save a report to the Crystal Server via the CMC. I am uploading the report from the objects tab and attempting to save to a folder. The report has 1 static defined parameter and that's it. When i click submit to save the report i receive the following error message: "There was an error while writing data back to the server: Failed to commit objects to server : Duplicate object name in the same folder." There is not a anothe report within the folder with that name. What could be causing this error message and equally important, what is the solution.

hte message you received about duplicate user probably means something hadn't fully updated yet. Once it did then it worked...
Regards,
Tim

Error while loading data into the cube

Hi,
I loaded data on to PSA and when I am loading the data to the cube through DataTransferProcess, I get an error (red color).
Through "Manage", I could see teh request in red. How do I get to knoe the exact error? Also what could be the possibel reason for this?
Also can some one explain the Datatransfer process(not in process chain)?
Regards,
Sam

Hi Sam
after you load the data through DTP(after click on execute button..) > just go to monitor screen.. in that press the refresh button..> in that it self.. you can find the logs..
otherwise.. in the request screen also.. beside of the request number... you can see the logs icon.. you can click on this..
DTP means..
DTP-used for data transfer process from psa to data target..
check thi link..for DTP:
http://help.sap.com/saphelp_nw04s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
to load data in to the datatargets or infoproviders like DSO, cube....
in your case.. the problem may be.. check the date formats.. special cherectrs... and
REGARDS
@JAY

ERROR : "Exceptions in Substep: Rules" while loading data from DSO to CUBE

Hi All,
I have a scenario like this.
I was loading data from ODS to cube daily. everything was working fine till 2 days before. i added some characteristic fields in my cube while i didn't do any change in my key figures. now i started reloading of data from ODS to cubes. i got the following error "Exceptions in Substep: Rules" after some package of data loaded successfully.
I deleted the added fields from the infocube and then i tried toreload data again but i am facing the same error again "Exceptions in Substep: Rules".
Can any one tell me how to come out from this situation ?
Regards,
Komik Shah

Dear,
Check some related SDN posts:
zDSo Loading Problem
Re: Regarding Data load in cube
Re: Regarding Data load in cube
Re: Error : Exceptions in Substep: Rules
Regards,
Syed Hussain.

Error while loading data into cube 0calday to 0fiscper (2lis_13_vdcon)

Hi all,
I m getting following error while loading the data into cube.
"Time conversion from 0CALDAY to 0FISCPER (fiscal year V3 ) failed with value 10081031"
amit shetye

Hi Amit,
This conversion problem. Calender not maintained for Fiscal variant "V3", for Year: 1008.
Maintain calender for year: 1008 and transfer global setting from soruce(R/3).
RSA1--> Source systems --> from context menu --> transfer global settings > choose fiscal year variants and calender> execute
Hope it Helps
Srini

Error encountered while loading data into an Essbase cube from oracle DB

Hi All,
I am trying to load data into an Essbase cube from Oracle db. Essbase is installed in an 64 bit HP-UX machine and oracle database on HP -UX 11.23 B server. While performing the above I am getting the below error messages:
K/INFO - 1021013 - ODBC Layer Error: [08001] ==> [[DataDirect][ODBC Oracle Wire Protocol driver][Oracle]ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
HP-UX Error: 2: No such file or directory].
OK/INFO - 1021014 - ODBC Layer Error: Native Error code [1034] .
ERROR - 1021001 - Failed to Establish Connection With SQL Database Server. See log for more information.
Can you please help me out in identifying the issue, as why it could have occured , because of network problem or is there anything related to databse?
Regards,
Priya

The error is related to Oracle, I would check that it is all up and running
ORA-01034: ORACLE not available
Cheers
John
http://john-goodwin.blogspot.com/

Error while loading data on to the cube : Incompatible rule file.

Similar Messages

Maybe you are looking for