Error while loading data to ASO database using rules files and buffer id

Hello all,
While loading the data to our ASO cube from a data file and using a server rules file, I am getting a warning: "Incorrect Syntax near ['$'] ". But my script no where mentions the usage of $. Also the console throws no error while loading the data. It displays the progress bar 0-100% while the data is being loaded, but actually no data is getting loaded (when retrieval is checked). Also the script is unable to form any log file or error file. Can anyone throw some light what might be the reason behind this kind of data load behaviour.
Thanks in advance.
Amit

is that the real script? I don't see you using any parameter. (That's where $ comes to play). Try a double quote with echo (I never used echo in MaxL)
Also don't post passwords and server names on a forum.
Regards
Celvin
http://www.orahyplabs.com

Similar Messages

  • Getting error while loading  Data into ASO cube by flat file.

    Hi All,
    i am getting this error Essbase error 1270040: Data load buffer[1] does not exist while loading data into ASO cube.
    does anyone have solution.
    Regards,
    VM

    Are you using ODI to load the data or maxl? If you are using an ODI interface, are you using a load rule also which version of essbase and ODI are you using
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Error while loading data into SAP BW using BO Data Services......

    Hello All,
    I have a job to load data from SQL Server to SAP BW. I have followed the steps got from SAP wiki to do this.
    1. I have created an RFC connection between two servers(SAP and BODS Job Server)
    when I schedule and start the job immediately from the SAP BW, i get this error and it aborts the RFC connection....
    "Error while executing the following command:  -sJO return code:238"
    Error message during processing in BI
    Diagnosis
    An error occurred in BI while processing the data. The error is documented in an error message.
    System Response
    A caller 01, 02 or equal to or greater than 20 contains an error meesage.
    Further analysis:
    The error message(s) was (were) sent by:
    Scheduler
    Any help would be appreciated......
    Thanks
    Praveen...

    Hi Praveen,
    I want to know which version of BODS you are using for your development of ETL jobs?.
    If it's BODS 12.2.2.2 then  you will get this type of problems frequently as in BODS 12.2.2.2 version , only two connection
    is possible to create while having RFC between BW and BODS.
    So , i suggest if you are using BODS 12.2.2.2 version  , then upgrade it with BODS 12.2.0.0 with Service PACK  3 and Fix Pack3 .
    AS in BODS 12.2.3.3. we have option of having ten connection parallely at a time which helps in resolving this issues.
    please let me know what is your BODS version and if you have upgraded your BODS to SP3 with FP3 , whether your problem is resolved or not..
    All the best..!!
    Thanks ,
    Shandilya Saurav

  • Weblogic  message ---error while loading data into planning database

    Hi,
    Does anyone have idea on this error message .We are loading data into planning 11.1.2.1 using ERPI standalone 11.1.2.1.501 but everytime it load gives out this message and data load is unsuccessful.platform is Microsoft windows 64-bit 2008R2 ----Database Microsoft SQL Server 2008.
    Please help.
    <Mar 2, 2012 12:20:51 PM PST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
    <Mar 2, 2012 12:36:24 PM PST> <Warning> <JMX> <BEA-149515> <An error was encountered getting the attribute DatabaseProductName on the MBean com.bea:ServerRuntime=ErpIntegrator0,Name=aif_datasource,Type=JDBCDataSourceRuntime during a call to getAttributes>
    <Mar 2, 2012 12:36:24 PM PST> <Warning> <JMX> <BEA-149515> <An error was encountered getting the attribute DriverVersion on the MBean com.bea:ServerRuntime=ErpIntegrator0,Name=aif_datasource,Type=JDBCDataSourceRuntime during a call to getAttributes>
    <Mar 2, 2012 12:36:24 PM PST> <Warning> <JMX> <BEA-149515> <An error was encountered getting the attribute DriverName on the MBean com.bea:ServerRuntime=ErpIntegrator0,Name=aif_datasource,Type=JDBCDataSourceRuntime during a call to getAttributes>
    <Mar 2, 2012 12:36:24 PM PST> <Warning> <JMX> <BEA-149515> <An error was encountered getting the attribute DatabaseProductVersion on the MBean com.bea:ServerRuntime=ErpIntegrator0,Name=aif_datasource,Type=JDBCDataSourceRuntime during a call to getAttributes>
    <Mar 2, 2012 12:36:24 PM PST> <Warning> <JMX> <BEA-149515> <An error was encountered getting the attribute DatabaseProductName on the MBean com.bea:ServerRuntime=ErpIntegrator0,Name=EPMSystemRegistry,Type=JDBCDataSourceRuntime during a call to getAttributes>
    <Mar 2, 2012 12:36:24 PM PST> <Warning> <JMX> <BEA-149515> <An error was encountered getting the attribute DriverVersion on the MBean com.bea:ServerRuntime=ErpIntegrator0,Name=EPMSystemRegistry,Type=JDBCDataSourceRuntime during a call to getAttributes>
    <Mar 2, 2012 12:36:24 PM PST> <Warning> <JMX> <BEA-149515> <An error was encountered getting the attribute DriverName on the MBean com.bea:ServerRuntime=ErpIntegrator0,Name=EPMSystemRegistry,Type=JDBCDataSourceRuntime during a call to getAttributes>
    <Mar 2, 2012 12:36:24 PM PST> <Warning> <JMX> <BEA-149515> <An error was encountered getting the attribute DatabaseProductVersion on the MBean com.bea:ServerRuntime=ErpIntegrator0,Name=EPMSystemRegistry,Type=JDBCDataSourceRuntime during a call to getAttributes>

    Hi Found solution.login to weblogic console and change the timeout of ERPI from 600 sec to 20000 sec.\
    It worked no more error.
    Cheers

  • Error while loading data into Oracle db using SSIS

    Hi,
    Can somebody help regarding the following error message:
    Message
    Error: 2013-07-21 03:23:50.76     Code: 0xC0202009     Source: Data Flow Task 25 Destination 121 - BUSINESSFLOWLOG 1 [466]     Description: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.  An OLE DB record is available.  Source: "OraOLEDB"  Hresult: 0x80004005  Description: "ROW-00060: Internal error: [dainsert,16]`? ".  End Error  Error: 2013-07-21 03:23:50.76     Code: 0xC0209029     Source: Data Flow Task 25 Destination 121 - BUSINESSFLOWLOG 1 [466]     Description: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR.  The "input "Destination Input" (479)" failed because error code 0xC020907B occurred, and the error row disposition on "input "Destination Input" (479)" specifies failure on error. An error occurred on the specified object of the specified component.  There may be error messages posted before this with more information about the failure.  End Error  Error: 2013-07-21 03:23:50.76     Code: 0xC0047022     Source: Data Flow Task 25 SSIS.Pipeline     Description: SSIS Error Code DTS_E_PROCESSINPUTFAILED.  The ProcessInput method on component "Destination 121 - BUSINESSFLOWLOG 1" (466) failed with error code 0xC0209029 while processing input "Destination Input" (479). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.  There may be error messages posted before this with more information about the failure.  End Error  Error: 2013-07-21 03:23:50.78     Code: 0xC02020C4     Source: Data Flow Task 25 Source 121 - BUSINESSFLOWLOG 1 [511]     Description: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.  End Error  Error: 2013-07-21 03:23:50.78     Code: 0xC0047038     Source: Data Flow Task 25 SSIS.Pipeline     Description: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.  The PrimeOutput method on component "Source 121 - BUSINESSFLOWLOG 1" (511) returned error code 0xC02020C4.  The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.  There may be error messages posted before this with more information about the failure.  End Error  DTExec: The package execution returned DTSER_FAILURE (1).  Started:  03:00  Finished: 03:23  Elapsed:  1431.06 seconds.  The package execution failed.  The step failed.
    THANKS.

    I don't see any Oracle related error.
    Consider posting this on any SSIS forum

  • Error While loading data for LIS InfoSources.

    Hi All,
    I am repeatedly receiving load failure errors while loading data using 2lis_01_s001 (This is the case with all the InfoSources).
    The error message is:
    An error occurred in the source system.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    in our Quality system, we disabled the LIS Updation to No Update(R3) and loaded data and then again changed the Update Mode for No Updating to Asynchronous Update(R3). But now we are doing dataloading in Production. How to proceed. Should we have to disable the LIS Updating whenever we have to load the loads from R3 to BW.
    Regards
    Jay

    Hi Jayanthy,
    Pls. check the order of the fields in the two set up tables for the S001 structure. The order of fields in both the tables should be the same.
    You can see the structure in the TCode - SE11.
    If the order is different, then you bneed to ask the BASIS person to change the order so that the order of fields in both the setup tables is same. This should fix the issue.
    Thanks,
    Raj

  • Error while loading data from 0FI_TX_4 to ODS

    Dear Friends,
    One of our proccess chain getting error since a week, every day with same error while loading data from R3 data source 0FI_TX_4 to ODS.
    Short dump is raised in R3 system.
    "DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
    "SAPLBWFIR" or "LBWFIRU13"
    "BWFIR_READ_BSET_CPUDT_DATA"
    ORA-01555
    The number of records are below 10000 only.
    All other chains are OK.
    we have already searched SDN and Notes...and applied below solution, but still no use
    Increase the size of all the roll back segments
    Increase number of REDO logs
    Decrease the number of records per data packet
    Any more suggessions please ??
    Thanks
    Tony

    How are you telling that no. of records are below 10000 .Have you checked the no.of records in PSA???
    Now ,I tell you something which I had done for this error .I increased the Package size such that whole data gets transferred in single data package.Please make the package size as large as possible so that all the data can be processed in single package.
    I know you have read so many threads on the  same but what I am suggesting is what I have done and successfully rectified this issue.
    regards,
    rocks

  • Error while loading data from a file on application server

    Hi all,
    Facing an error while loading data from a flat file.
    Error 'The argument '##yyyymmdd;@##' cannot be interpreted as a number ' while assigning character.
    I changed the format of date fields (tried with number,general,date(International))in the xls. But i still get the same error.Did check all the data types in Data source all the fields are dats.
    Can you please tell me what could be the problem?
    Thank you all,
    Praveen

    Hi all,
    As far as my first question i got through it but i had one more field in my flat file while actually is a time stamp, but in my flat file i have a data in this format
    10/21/2006  5:11:48 AM which i need to change to 10/21/2006
    one more note is i have some of the fields as NULL in this field
    Last Updated Date
    10/21/2006  5:11:48 AM
    10/21/2006  5:11:48 AM
    NULL
    NULL
    10/21/2006  5:11:48 AM
    NULL
    I want to display the values as 10/21/2006 and NULL as it is.
    Please let me know if we have a conversion routine in datasource which can solve my problem.
    Regards,
    Praveen

  • Error while loading data from DS into cube

    Hello All
    I am getting the below error while loading data from Data source to the cube.
    Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20070331
    Wht am i suppose to do?
    Need ur input in this regard.
    Regards
    Rohit

    Hi
    Simply map 0calday to 0fiscper(you already done it)..You might have forgotten to map fiscal year variant in update rules....if it comes from souce,just map it..if it won't comes from source...make it as constant in update rules and give value..
    If your business is April to March make it as  'V3'
    If your business is January to Decemeber make it as 'K4'..
    activate your update rules delete old data and upload again....
    Hope it helps
    Thanks
    Teja

  • Error while loading data to ODS

    Hello BW folks ,
    I am getting an error while loading data to ODS from R/3 data source.
    The error message is " Error in PSA".
    We have deleted yesterday data from PSA for the related infosource/data source successfully .
    Since then this error is occuring. Previously data upload was successful.
    In Detail tab of monitor we are getting error message in Request option ( red Mark )
    and the same request is not going to R/3 .
    <b>The related Job itself is not present in R/3 .</b>
    This looks very strange and new to me .
    Could anyone help me in rectifying this issue ?
    Thanks in Advance.
    Best Regards ,
    Amol.

    Hello All,
    Thanks for reply.
    I tried to replicate the data source once again and activate the transfer rules in BW Production by running program in SE38 =  RS_TRANS*  activate all tranfer sturctures , then I got an error message that one infoobject is added to transfer rules in BW Production .
    But interestingly the same Transfer rules do not have this infoobject in BW Development server . So I create once again a request for Transfer rules in Dev and transported it to BW production.
    and This solved the problem
    The error message in Monitor was " Error in PSA " and then request itself was not going to R/3 . But the real issue was with Transfer rules. So after rectifying it we have solved the problem of data upload.
    Best Regards ,
    Amol Kulkarni.

  • I got the above error while i restore the standby database using RMAN backu

    Dear All,
    RMAN> crosscheck archivelog all;
    using target database controlfile instead of recovery catalog
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=14 devtype=DISK
    specification does not match any archive log in the recovery catalogi got the above error while i restore the standby database using RMAN backup from production.
    Help need.i take the backup without catalog database.
    regards,
    DB

    rman> list backup;
    it shows lengthier but i showed only the corresponding
    BS Key  Type LV Size       Device Type Elapsed Time Completion Time
    3479    Full    17G        DISK        01:29:42     09-FEB-13
            BP Key: 3479   Status: AVAILABLE   Tag: 09FEB13_FULL_ESMSRV1_DB
            Piece Name: /oradatabkp/rman/esmsrv1_full_db_09feb13
      SPFILE Included: Modification time: 08-FEB-13
      List of Datafiles in backup set 3479
      File LV Type Ckp SCN    Ckp Time  Name
      1       Full 1759250260 09-FEB-13 /esmsrv1/dbs/system01.dbf
      2       Full 1759250260 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
      3       Full 1759250260 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
      4       Full 1759250260 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
      5       Full 1759250260 09-FEB-13 /esmsrv1/dbs/example01.dbf
      6       Full 1759250260 09-FEB-13 /esmsrv1/dbs/indx01.dbf
      7       Full 1759250260 09-FEB-13 /esmsrv1/dbs/odm01.dbf
      8       Full 1759250260 09-FEB-13 /esmsrv1/dbs/tools01.dbf
      9       Full 1759250260 09-FEB-13 /esmsrv1/dbs/users01.dbf
      10      Full 1759250260 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
      11      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
      12      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
      13      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
      14      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
      15      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
      16      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
      17      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
      18      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
      19      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
      20      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
      21      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
      22      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
      23      Full 1759250260 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
      39      Full 1759250260 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
    BS Key  Type LV Size       Device Type Elapsed Time Completion Time
    3480    Full    17G        DISK        01:21:30     09-FEB-13
            BP Key: 3480   Status: EXPIRED   Tag: TAG20130209T200021
            Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_full_Feb09
      SPFILE Included: Modification time: 08-FEB-13
      List of Datafiles in backup set 3480
      File LV Type Ckp SCN    Ckp Time  Name
      1       Full 1759422265 09-FEB-13 /esmsrv1/dbs/system01.dbf
      2       Full 1759422265 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
      3       Full 1759422265 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
      4       Full 1759422265 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
      5       Full 1759422265 09-FEB-13 /esmsrv1/dbs/example01.dbf
      6       Full 1759422265 09-FEB-13 /esmsrv1/dbs/indx01.dbf
      7       Full 1759422265 09-FEB-13 /esmsrv1/dbs/odm01.dbf
      8       Full 1759422265 09-FEB-13 /esmsrv1/dbs/tools01.dbf
      9       Full 1759422265 09-FEB-13 /esmsrv1/dbs/users01.dbf
      10      Full 1759422265 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
      11      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
      12      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
      13      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
      14      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
      15      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
      16      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
      17      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
      18      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
      19      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
      20      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
      21      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
      22      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
      23      Full 1759422265 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
      39      Full 1759422265 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
    BS Key  Type LV Size       Device Type Elapsed Time Completion Time
    3481    Full    4M         DISK        00:00:03     09-FEB-13
            BP Key: 3481   Status: AVAILABLE   Tag: TAG20130209T212205
            Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_controlfile_copy_Feb09
      Controlfile Included: Ckp SCN: 1759462488   Ckp time: 09-FEB-13
    BS Key  Type LV Size       Device Type Elapsed Time Completion Time
    3482    Full    0          DISK        00:00:01     09-FEB-13
            BP Key: 3482   Status: AVAILABLE   Tag: TAG20130209T212212
            Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_spfile_copy_Feb09
      SPFILE Included: Modification time: 08-FEB-13
    ls -l /oradatabkp
    root@drsrv1#ls -l /oradatabkp
    total 1108672
    drwxr-xr-x   2 ovsd       dba             96 Sep 27  2009 alert_bkp
    -rw-r--r--   1 oracle     dba            195 Mar 15  2007 create.sql
    drwxr-xr-x   2 oracle     dba           8192 Aug  7  2009 ctrl_bkp
    -rw-r--r--   1 root       sys        565114880 Apr 24  2007 drsrv1.tar
    drwxrwxrwx   2 root       sys             96 Jun 17  2011 drsrv2-ignitebkp
    drwxr-xr-x   4 root       sys             96 Apr 24  2007 esmsrv1
    -rw-r-----   1 root       sys        1613824 Feb 22  2007 esmsrv1stby.ctl
    -rw-r--r--   1 esmsrv1    dba           5120 Dec 31  2009 esmtables.dmp
    -rw-r--r--   1 esmsrv1    dba            538 Dec 31  2009 esmtables.log
    drwxrwxrwx   4 root       sys           8192 Mar 10  2009 export
    drwxr-xr-x   8 root       sys           8192 Apr 24  2007 finalbackup
    -rw-r--r--   1 oracle     dba           3820 Sep  5  2008 invalid.sql
    -rw-r--r--   1 esmsrv1    dba         303104 Dec 31  2009 kirdevports.dmp
    -rw-r--r--   1 esmsrv1    dba            591 Dec 31  2009 kirdevports.log
    drwxr-xr-x   2 root       root            96 Feb 12  2007 lost+found
    -rw-r--r--   1 oracle     dba          24954 Aug  9  2009 ovcontrol-090909.ctl
    drwxr-xr-x  22 root       sys           8192 Apr 24  2007 ovpi
    drwxr-xr-x   2 oracle     dba           8192 Aug  7  2009 pfile_bkp
    drwxrw-rw-   4 oracle     dba           8192 Feb 10 15:25 rman
    drwxr-xr-x  28 root       sys           8192 Feb  1 17:15 schedbkp
    drwxr-xr-x   2 oracle     dba           8192 Jul 11  2011 sdnnm
    -rw-r--r--   1 esmsrv1    dba           2196 Dec 31  2009 srirdevports.log
    drwxr-xr-x   2 oracle     dba             96 Mar 13  2009 statsreport
    -rw-r--r--   1 oracle     dba            966 Mar 15  2007 tbs.sql
    drwxr-xr-x   5 oracle     dba             96 Mar 16  2007 testov
    drwxr-xr-x   2 root       sys         442368 Mar 11  2009 trendadm_files
    root@drsrv1#ls -l /oradatabkp/rman
    total 37244448
    drwxr-xr-x   2 oracle     dba           8192 Feb 10 15:25 esmsrv1
    -rw-r-----   1 oracle     dba        19068198912 Feb  9 14:21 esmsrv1_full_db_09feb13
    drwxrw-rw-   2 oracle     dba           8192 Feb  9 21:36 openview
    -rw-r--r--   1 oracle     dba         920442 Feb  9 21:37 rmanbkp-all.log

  • 10)example of errors while loading data and how do u resolve them?

    )example of errors while loading data and how do u resolve them?

    hai ram reddy this is ramprasad reddy....u can get this type of most commen errors....like below
    As the frequent failures and errors , there is no fixed reason for the load to be fail , if you want it for the interview perspective I would answer it in this way.
    a) Loads can be failed due to the invalid characters
    b) Can be because of the deadlock in the system
    c) Can be becuase of previuos load failure , if the load is dependant on other loads
    d) Can be because of erreneous records
    e) Can be because of RFC connections.....(sol: raise the ticket to BASIS team to provide the connection)
    f)can be coz of missing master data.
    g)can be coz of no data found in the source system.
    h)Time stamp error........(sol: activate the data source and replicate the data source and load)
    i)Short dump error.........(sol: delete the request and load once again)
    j)Data locking when loading in parallel.
    k)ODS activation failures.
    l)No SID found........(sol: should load masterdata before transaction data)

  • DIM: how to load metadata to Essbase without using rule files

    Hi,
    The Essbase adapter has been installed in the informatica PowerCenter (v8.1.1). We want to create a Essbase target definition to load metadata. In the Table Creation Wizard, we select Table Type: Dynamic dimension building (Type 3), but it needs to specify Rules file in the Column Creation Wizard.
    Any method to load metadata into Essbase without using Rules file?
    Thank you in advance.

    You could load the data into Essbase without Rule file by means of free form loading which the Datasource would be a file.

  • Error while loading data into BW (BW as Target) using Data Services

    Hello,
    I'm trying to extract data from SQL Server 2012 and load into BW 7.3 using Data Services. Data Services shows that the job is finished successfully. But, when I go into BW, I'm seeing the below / attached error.
    Error while accessing repository Violation of PRIMARY KEY constraint 'PK__AL_BW_RE_
    Please let me know what this means and  how to fix this. Not sure if I gave the sufficient information. Please let me know if you need any other information.
    Thanks
    Pradeep

    Hi Pradeep,
    Regarding your query please refer below SCN thread for the same issue:
    SCN Thread:
    FIM10 to BW 73- Violation of PRIMARY KEY -table AL_BW_REQUEST
    Error in loading data from BOFC to BW using FIM 10.0
    Thanks,
    Daya

  • Error while loading data into 0pur_c03 using 2lis_02_scl

    Hi,
    While trying to load data into 0pur_c03 by using Data Source 2lis_02_scl from R/3 the error message "The material 100 does not exist or not active" is being displayed. I have loaded master data for 0Material and performed change Run also.Still the problem is not resolved.Please suggest in resolving this issue.
    Regards,
    Hari Prasad B.

    I have the same problem in my system and i found that the material XXXXX had movements.....sales documents and more but in certain moment it material was deleted in R3 and it is not loaded into 0MATERIAL infoobject because is marked for deletion....
    If you have this error must activate the load request manually and your infocube can hold the data without any problem.....
    Regards

Maybe you are looking for