Error while Loading data to InfoCube

I am taking data from the data source 2lis_13_vditm. I created one iNfoCube in BI and wrote the transformatioin in b/w the infocube and the datasource. When I tried to load the datasource using DTP.. Its showing the following error
"No SID found for value 'CTN ' of characteristic 0SALES_UNIT".
The details are the following
Diagnosis
     Characteristic value CTN does not exist in the master data table of
     characteristic 0SALES_UNIT . Therefore, this value could not be
     transformed into the internal SID.
Please help me to resolve this issue...

Hi,
U need to maintain the UNIT @ CUNI Tcode
Refer this thread for Steps..
Re: 0Unit / se16 / CUNI
Thanks

Similar Messages

Error while loading data to Infocube using DTP.

Dear All
I am facing problem while uploading data in Zinfocube. Up to PSA the data is loaded and not showing any error but when we try to upload the data from PSA to INFOCUBE through a DTP, It ens up showing error message (Error while updating to targets Infocube) . The long text and details doesnot give any further information. I can't figure out what could be the reason....
Thanks
Dinesh Sharma

Hi
The data might be mismatched between PSA and Cube or might be the problem in the transformation. We cannot really say what the problem until you tell the error msg.
There will be some error message in DTP monitor
Regards
Srikanth

Runtime error while loading data into infocube

Hi all,
I am getting a runtime error while loading the transaction data into the InfoCube.
Exception name: CX_SY_GENERATE_SUBPOOL_FULL
Runtime error: GENERATE_SUBPOOL_DIR_FULL
Anyone has any idea about this error? Any help will be really helpful. Thanks in advance.
Regards,
Sathesh

Hi Sathesh,
Please provide more details for the problem.
You can go and check in ST22. Go through the Dump Analysis and Let us know.
Regards
Hemant Khemani

Error While loading data for LIS InfoSources.

Hi All,
I am repeatedly receiving load failure errors while loading data using 2lis_01_s001 (This is the case with all the InfoSources).
The error message is:
An error occurred in the source system.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
in our Quality system, we disabled the LIS Updation to No Update(R3) and loaded data and then again changed the Update Mode for No Updating to Asynchronous Update(R3). But now we are doing dataloading in Production. How to proceed. Should we have to disable the LIS Updating whenever we have to load the loads from R3 to BW.
Regards
Jay

Hi Jayanthy,
Pls. check the order of the fields in the two set up tables for the S001 structure. The order of fields in both the tables should be the same.
You can see the structure in the TCode - SE11.
If the order is different, then you bneed to ask the BASIS person to change the order so that the order of fields in both the setup tables is same. This should fix the issue.
Thanks,
Raj

Error while loading data from a file on application server

Hi all,
Facing an error while loading data from a flat file.
Error 'The argument '##yyyymmdd;@##' cannot be interpreted as a number ' while assigning character.
I changed the format of date fields (tried with number,general,date(International))in the xls. But i still get the same error.Did check all the data types in Data source all the fields are dats.
Can you please tell me what could be the problem?
Thank you all,
Praveen

Hi all,
As far as my first question i got through it but i had one more field in my flat file while actually is a time stamp, but in my flat file i have a data in this format
10/21/2006 5:11:48 AM which i need to change to 10/21/2006
one more note is i have some of the fields as NULL in this field
Last Updated Date
10/21/2006 5:11:48 AM
10/21/2006 5:11:48 AM
NULL
NULL
10/21/2006 5:11:48 AM
NULL
I want to display the values as 10/21/2006 and NULL as it is.
Please let me know if we have a conversion routine in datasource which can solve my problem.
Regards,
Praveen

Error while loading data from DS into cube

Hello All
I am getting the below error while loading data from Data source to the cube.
Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20070331
Wht am i suppose to do?
Need ur input in this regard.
Regards
Rohit

Hi
Simply map 0calday to 0fiscper(you already done it)..You might have forgotten to map fiscal year variant in update rules....if it comes from souce,just map it..if it won't comes from source...make it as constant in update rules and give value..
If your business is April to March make it as 'V3'
If your business is January to Decemeber make it as 'K4'..
activate your update rules delete old data and upload again....
Hope it helps
Thanks
Teja

Error while loading data from 0FI_TX_4 to ODS

Dear Friends,
One of our proccess chain getting error since a week, every day with same error while loading data from R3 data source 0FI_TX_4 to ODS.
Short dump is raised in R3 system.
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"SAPLBWFIR" or "LBWFIRU13"
"BWFIR_READ_BSET_CPUDT_DATA"
ORA-01555
The number of records are below 10000 only.
All other chains are OK.
we have already searched SDN and Notes...and applied below solution, but still no use
Increase the size of all the roll back segments
Increase number of REDO logs
Decrease the number of records per data packet
Any more suggessions please ??
Thanks
Tony

How are you telling that no. of records are below 10000 .Have you checked the no.of records in PSA???
Now ,I tell you something which I had done for this error .I increased the Package size such that whole data gets transferred in single data package.Please make the package size as large as possible so that all the data can be processed in single package.
I know you have read so many threads on the same but what I am suggesting is what I have done and successfully rectified this issue.
regards,
rocks

Error while loading data to ODS

Hello BW folks ,
I am getting an error while loading data to ODS from R/3 data source.
The error message is " Error in PSA".
We have deleted yesterday data from PSA for the related infosource/data source successfully .
Since then this error is occuring. Previously data upload was successful.
In Detail tab of monitor we are getting error message in Request option ( red Mark )
and the same request is not going to R/3 .
<b>The related Job itself is not present in R/3 .</b>
This looks very strange and new to me .
Could anyone help me in rectifying this issue ?
Thanks in Advance.
Best Regards ,
Amol.

Hello All,
Thanks for reply.
I tried to replicate the data source once again and activate the transfer rules in BW Production by running program in SE38 = RS_TRANS* activate all tranfer sturctures , then I got an error message that one infoobject is added to transfer rules in BW Production .
But interestingly the same Transfer rules do not have this infoobject in BW Development server . So I create once again a request for Transfer rules in Dev and transported it to BW production.
and This solved the problem
The error message in Monitor was " Error in PSA " and then request itself was not going to R/3 . But the real issue was with Transfer rules. So after rectifying it we have solved the problem of data upload.
Best Regards ,
Amol Kulkarni.

10)example of errors while loading data and how do u resolve them?

)example of errors while loading data and how do u resolve them?

hai ram reddy this is ramprasad reddy....u can get this type of most commen errors....like below
As the frequent failures and errors , there is no fixed reason for the load to be fail , if you want it for the interview perspective I would answer it in this way.
a) Loads can be failed due to the invalid characters
b) Can be because of the deadlock in the system
c) Can be becuase of previuos load failure , if the load is dependant on other loads
d) Can be because of erreneous records
e) Can be because of RFC connections.....(sol: raise the ticket to BASIS team to provide the connection)
f)can be coz of missing master data.
g)can be coz of no data found in the source system.
h)Time stamp error........(sol: activate the data source and replicate the data source and load)
i)Short dump error.........(sol: delete the request and load once again)
j)Data locking when loading in parallel.
k)ODS activation failures.
l)No SID found........(sol: should load masterdata before transaction data)

Error while loading data into Customers InfoCube

Hi All,
I am receicing the following error while loading the data into the following InfoCube 0SD_C01.
The error I am receiving is "LIS Updating is Still Active".
I am also receiving error similar to "The data is being edited at the time of loading the data request".
Does anybody have encountered such a situation...
Please help me out.
Regards
YJ

Hi Dinesh and Paolo,
The links are very useful.
I went through the Transactions and found out that the Asynchronous Updating is going on for S001.
So what are the steps that I can take as a BW Consultant so that the data is loaded into BW.
Regards
YJ

Error while loading data

hi guys
i got an error while loading infoobject atrributes
i created characteristic info object "equipment" with Master data and text.
when i loaded text it was working fine but the problem happened when i start
loading attributes data.
error code is as given below
Check Load from InfoSource D92_EQUIP , Packet infpackage for equipment -attrib
Please execute the mail for additional information.
Data records were selected in the PSA
Diagnosis
Data records were marked as incorrect in the PSA.
System response
If error messages exist for the data records, the corresponding data packets were not updated using the PSA.
Procedure
Go into the PSA maintenance for the request and read the logged messages.
You find the relevant messages for each record in the PSA table by double-clicking on the status of the record.
Where necessary, edit the incorrect records or remove the error in another way.
Post the incorrect data packets manually.
Note that you are only permitted to edit and manually update the request if it is not contained in the request list in the InfoCube (see InfoCube administration). Where necessary, first delete it from the InfoCube.
any advice ???its says problem with data records..but i couldnt find any
regards
abhi
Message was edited by:
Abhilash Muraleedharan

Hi Abhilash,
You can use the preview functionality in the external page to see if the reords are being pulled properly or not.
If not then there is some problem with the file which you need to fix. Or might be the setting you have done in selecting the delimiter in BW or any setting. Also check your routines if you are using any.
If the file is being pulled correctly try seeing the error message under the details tab in the monitor screen. That will give you an idea why the load is failing.
Hope that helps.
regards.

Error while loading data after level 17 patch

Hi all,
A week ago we had patch level 17 implemented on our SAP NetWeaver BI 7.0 system. Since then, we cannot load any data to some cubes using update rules. We get "Error when generating the update program" (Message no. RSAU484), status red while loading data.
I tried activating the update rules
We get te same error when loading data from a DSO into a cube.
The strange thing is that it doesn't happen for all the objects in the system. We have troubles loading deltas from 2LIS_12_VCITM (delivery items), 2LIS_13VAITM (sales order items) and from a BI content DSO in assets accountng.
Please if you have any idea or if this happend to you, i appreciate any suggestion.
This is not an implementation, these processes are already live for months, and we didtn't have any problems before the patch..
thanks,
Andreea

We ran into same issue & another one during our BI 7.0 SPS15/SP17 upgrade.
The solution:
1. Apply 2 notes:
[Note 1146851 - BI 7.0 (SP 18): Error RSAU 484 when generating update|http://service.sap.com/sap/support/notes/1146851]
[Note 1152453 - Termination generating InfoCube write program|http://service.sap.com/sap/support/notes/1152453]
2. Then run program RSDD_RSTMPLWIDTP_GEN_ALL
to generate the new programs for InfoCubes from the template RSTMPLWIDTP and cleans up the staging table RSUPDINFO per note 1152453.

Getting error While loading data from ERP integrator to HFM

Hello,
We are getting the following error while loading the data from ERPI to HFM.
2013-12-31 22:44:54,133 INFO [AIF]: ERPI Process Start, Process ID: 300
2013-12-31 22:44:54,137 INFO [AIF]: ERPI Logging Level: DEBUG (5)
2013-12-31 22:44:54,139 INFO [AIF]: ERPI Log File: C:\Windows\TEMP\/aif_501_300.log
2013-12-31 22:44:54,141 INFO [AIF]: Jython Version: 2.5.1 (Release_2_5_1:6813, Sep 26 2009, 13:47:54)
[Java HotSpot(TM) 64-Bit Server VM (Oracle Corporation)]
2013-12-31 22:44:54,143 INFO [AIF]: Java Platform: java1.7.0_25
2013-12-31 22:44:56,821 INFO [AIF]: COMM Process Periods - Insert Periods - START
2013-12-31 22:44:56,828 DEBUG [AIF]:
        SELECT l.SOURCE_LEDGER_ID
        ,l.SOURCE_LEDGER_NAME
        ,l.SOURCE_COA_ID
        ,l.CALENDAR_ID
        ,'0' SETID
        ,l.PERIOD_TYPE
        ,NULL LEDGER_TABLE_NAME
        FROM AIF_BALANCE_RULES br
        ,AIF_COA_LEDGERS l
        WHERE br.RULE_ID = 27
        AND l.SOURCE_SYSTEM_ID = br.SOURCE_SYSTEM_ID
        AND l.SOURCE_LEDGER_ID = br.SOURCE_LEDGER_ID
2013-12-31 22:44:56,834 DEBUG [AIF]:
    INSERT INTO AIF_PROCESS_PERIODS (
      PROCESS_ID
      ,PERIODKEY
      ,PERIOD_ID
      ,ADJUSTMENT_PERIOD_FLAG
      ,GL_PERIOD_YEAR
      ,GL_PERIOD_NUM
      ,GL_PERIOD_NAME
      ,GL_PERIOD_CODE
      ,GL_EFFECTIVE_PERIOD_NUM
      ,YEARTARGET
      ,PERIODTARGET
      ,IMP_ENTITY_TYPE
      ,IMP_ENTITY_ID
      ,IMP_ENTITY_NAME
      ,TRANS_ENTITY_TYPE
      ,TRANS_ENTITY_ID
      ,TRANS_ENTITY_NAME
      ,PRIOR_PERIOD_FLAG
      ,SOURCE_LEDGER_ID
            SELECT DISTINCT brl.LOADID PROCESS_ID
            ,pp.PERIODKEY PERIODKEY
            ,prd.PERIOD_ID
            ,COALESCE(prd.ADJUSTMENT_PERIOD_FLAG, 'N') ADJUSTMENT_PERIOD_FLAG
            ,COALESCE(prd.YEAR,0) GL_PERIOD_YEAR
            ,COALESCE(prd.PERIOD_NUM,0) GL_PERIOD_NUM
            ,prd.PERIOD_NAME GL_PERIOD_NAME
            ,COALESCE(prd.PERIOD_CODE, CAST(COALESCE(prd.PERIOD_NUM,0) AS VARCHAR(38))) GL_PERIOD_CODE
            ,(COALESCE(prd.YEAR,0) * 10000 + COALESCE(prd.PERIOD_NUM,0)) GL_EFFECTIVE_PERIOD_NUM
            ,COALESCE(ppa.YEARTARGET, pp.YEARTARGET) YEARTARGET
            ,COALESCE(ppa.PERIODTARGET, pp.PERIODTARGET) PERIODTARGET
            ,'PROCESS_BAL_IMP' IMP_ENTITY_TYPE
            ,(COALESCE(prd.YEAR,0) * 10000 + COALESCE(prd.PERIOD_NUM,0)) IMP_ENTITY_ID
            ,prd.PERIOD_NAME IMP_ENTITY_NAME
            ,'PROCESS_BAL_TRANS' TRANS_ENTITY_TYPE
            ,(COALESCE(prd.YEAR,0) * 10000 + COALESCE(prd.PERIOD_NUM,0)) TRANS_ENTITY_ID
            ,pp.PERIODDESC TRANS_ENTITY_NAME
            ,'N' PRIOR_PERIOD_FLAG
            ,1 SOURCE_LEDGER_ID
            FROM (
              AIF_BAL_RULE_LOADS brl
              INNER JOIN TPOVCATEGORY pc
                ON pc.CATKEY = brl.CATKEY
              INNER JOIN TPOVPERIOD_FLAT_V pp
                ON pp.PERIODFREQ = pc.CATFREQ
                AND pp.PERIODKEY >= brl.START_PERIODKEY
                AND pp.PERIODKEY <= brl.END_PERIODKEY
              LEFT OUTER JOIN TPOVPERIODADAPTOR_FLAT_V ppa
                ON ppa.PERIODKEY = pp.PERIODKEY
                AND ppa.PERIODFREQ = pp.PERIODFREQ
                AND ppa.INTSYSTEMKEY = 'FMTEST2'
            INNER JOIN AIF_GL_PERIODS_STG prd
              ON prd.SOURCE_SYSTEM_ID = 3
              AND prd.CALENDAR_ID IN ('10000')
      AND prd.SETID = '0'
      AND prd.PERIOD_TYPE = 'Month'
              AND prd.ADJUSTMENT_PERIOD_FLAG = 'N'
              AND prd.START_DATE > pp.PRIORPERIODKEY
              AND prd.START_DATE <= pp.PERIODKEY
            WHERE brl.LOADID = 300
            ORDER BY pp.PERIODKEY
            ,GL_EFFECTIVE_PERIOD_NUM
2013-12-31 22:44:56,915 INFO [AIF]: COMM Process Periods - Insert Periods - END
2013-12-31 22:44:56,945 INFO [AIF]: COMM Process Periods - Insert Process Details - START
2013-12-31 22:44:56,952 DEBUG [AIF]:
    INSERT INTO AIF_PROCESS_DETAILS (
      PROCESS_ID
      ,ENTITY_TYPE
      ,ENTITY_ID
      ,ENTITY_NAME
      ,ENTITY_NAME_ORDER
      ,TARGET_TABLE_NAME
      ,EXECUTION_START_TIME
      ,EXECUTION_END_TIME
      ,RECORDS_PROCESSED
      ,STATUS
      ,LAST_UPDATED_BY
      ,LAST_UPDATE_DATE
      SELECT PROCESS_ID
      ,ENTITY_TYPE
      ,ENTITY_ID
      ,ENTITY_NAME
      ,ENTITY_NAME_ORDER
      ,'AIF_EBS_GL_BALANCES_STG' TARGET_TABLE_NAME
      ,CURRENT_TIMESTAMP EXECUTION_START_TIME
      ,NULL EXECUTION_END_TIME
      ,0 RECORDS_PROCESSED
      ,'PENDING' STATUS
      ,'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' LAST_UPDATED_BY
      ,CURRENT_TIMESTAMP LAST_UPDATE_DATE
      FROM (
        SELECT DISTINCT PROCESS_ID
        ,IMP_ENTITY_TYPE ENTITY_TYPE
        ,IMP_ENTITY_ID ENTITY_ID
        ,IMP_ENTITY_NAME ENTITY_NAME
        ,(COALESCE(SOURCE_LEDGER_ID,0) * 100000000 + GL_EFFECTIVE_PERIOD_NUM) ENTITY_NAME_ORDER
        FROM AIF_PROCESS_PERIODS
        WHERE PROCESS_ID = 300
      ) q
      ORDER BY ENTITY_NAME_ORDER
2013-12-31 22:44:56,963 DEBUG [AIF]:
    INSERT INTO AIF_PROCESS_DETAILS (
      PROCESS_ID
      ,ENTITY_TYPE
      ,ENTITY_ID
      ,ENTITY_NAME
      ,ENTITY_NAME_ORDER
      ,TARGET_TABLE_NAME
      ,EXECUTION_START_TIME
      ,EXECUTION_END_TIME
      ,RECORDS_PROCESSED
      ,STATUS
      ,LAST_UPDATED_BY
      ,LAST_UPDATE_DATE
      SELECT PROCESS_ID
      ,ENTITY_TYPE
      ,ENTITY_ID
      ,ENTITY_NAME
      ,ENTITY_NAME_ORDER
      ,'TDATASEG' TARGET_TABLE_NAME
      ,CURRENT_TIMESTAMP EXECUTION_START_TIME
      ,NULL EXECUTION_END_TIME
      ,0 RECORDS_PROCESSED
      ,'PENDING' STATUS
      ,'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' LAST_UPDATED_BY
      ,CURRENT_TIMESTAMP LAST_UPDATE_DATE
      FROM (
        SELECT PROCESS_ID
        ,TRANS_ENTITY_TYPE ENTITY_TYPE
        ,MIN(TRANS_ENTITY_ID) ENTITY_ID
        ,TRANS_ENTITY_NAME ENTITY_NAME
        ,MIN(COALESCE(SOURCE_LEDGER_ID,0) * 100000000 + GL_EFFECTIVE_PERIOD_NUM) ENTITY_NAME_ORDER
        FROM AIF_PROCESS_PERIODS
        WHERE PROCESS_ID = 300
        AND PRIOR_PERIOD_FLAG = 'N'
        GROUP BY PROCESS_ID
        ,TRANS_ENTITY_TYPE
        ,TRANS_ENTITY_NAME
      ) q
      ORDER BY ENTITY_NAME_ORDER
2013-12-31 22:44:56,970 INFO [AIF]: COMM Process Periods - Insert Process Details - END
2013-12-31 22:44:57,407 DEBUG [AIF]: EBS/FS GL Balances Print Variables - Printing Variables - START
2013-12-31 22:44:57,408 DEBUG [AIF]:
p_process_id: 300
p_sql_db_type: ORACLE
p_partitionkey: 12
p_rule_id: 27
p_source_system_id: 3
p_application_id: 26
p_target_application_type: HFM
p_is_multi_currency: true
p_data_load_method: CLASSIC_VIA_EPMI
p_bal_balance_method_code: STANDARD
p_bal_ledger_group_code: SINGLE
p_bal_amount_type: MONETARY
p_prd_entity_name: JAN-13
p_prd_period_id: 135
p_prd_gl_period_name: JAN-13
p_prd_source_ledger_id: 1
p_prd_source_coa_id: 101
p_source_ledger_id: 1
p_source_coa_id: 101
p_bal_actual_flag: A
p_bal_seg_column_name: SEGMENT1
p_max_ccid_loaded_to_stg: 148137
2013-12-31 22:44:57,408 DEBUG [AIF]: EBS/FS GL Balances Print Variables - Printing Variables - END
2013-12-31 22:44:57,806 INFO [AIF]: LKM EBS/FS Extract Type - Load Audit AND Full Refresh - START
2013-12-31 22:44:57,817 DEBUG [AIF]:
    SELECT p.PROCESS_ID
    ,br.RULE_NAME
    ,l.SOURCE_LEDGER_NAME
    FROM AIF_GL_LOAD_AUDIT aud
    ,AIF_PROCESSES p
    ,AIF_BALANCE_RULES br
    ,AIF_COA_LEDGERS l
    WHERE aud.SOURCE_SYSTEM_ID = 3
    AND aud.SOURCE_LEDGER_ID = 1
    AND aud.GL_PERIOD_ID = 135
    AND aud.BALANCE_TYPE = 'A'
    AND p.PROCESS_ID = aud.LAST_LOADID
    AND p.STATUS = 'RUNNING'
    AND p.PROCESS_ID <> 300
    AND br.RULE_ID = p.RULE_ID
    AND l.SOURCE_SYSTEM_ID = aud.SOURCE_SYSTEM_ID
    AND l.SOURCE_LEDGER_ID = aud.SOURCE_LEDGER_ID
2013-12-31 22:44:57,826 DEBUG [AIF]:
        SELECT 'Y' VALID_FLAG
        FROM GL_PERIOD_STATUSES
        WHERE APPLICATION_ID = 101
        AND SET_OF_BOOKS_ID = 1
        AND PERIOD_NAME = 'JAN-13'
        AND CLOSING_STATUS IN ( 'O','C','P' )
2013-12-31 22:44:57,847 DEBUG [AIF]:
        SELECT 'Y' EXISTS_FLAG
        FROM GL_TRACK_DELTA_BALANCES
        WHERE SET_OF_BOOKS_ID = 1
        AND PROGRAM_CODE = 'FEM'
        AND PERIOD_NAME = 'JAN-13'
        AND ACTUAL_FLAG = 'A'
        AND EXTRACT_LEVEL_CODE = 'DTL'
        AND CURRENCY_TYPE_CODE = 'B'
        AND ENABLED_FLAG = 'Y'
2013-12-31 22:44:57,883 DEBUG [AIF]:
      SELECT MAX(DELTA_RUN_ID) MAX_DELTA_RUN_ID
      FROM GL_BALANCES_DELTA
      WHERE SET_OF_BOOKS_ID = 1
      AND PERIOD_NAME = 'JAN-13'
      AND ACTUAL_FLAG = 'A'
2013-12-31 22:44:57,898 DEBUG [AIF]:
    SELECT brl.EXECUTION_MODE
    ,( SELECT CASE COUNT(aud.DELTA_RUN_ID) WHEN 0 THEN 'N' ELSE 'Y' END
      FROM AIF_GL_LOAD_AUDIT aud
      WHERE aud.SOURCE_SYSTEM_ID = 3
      AND aud.SOURCE_LEDGER_ID = 1
      AND aud.GL_PERIOD_ID = 135
      AND aud.BALANCE_TYPE = 'A'
      AND aud.LAST_LOADID <> brl.LOADID
      AND COALESCE( aud.STATUS, 'SUCCESS' ) = 'SUCCESS'
     ) GL_LOAD_AUDIT_SUCCESS_FLAG
    ,( SELECT CASE COUNT(aud.DELTA_RUN_ID) WHEN 0 THEN 'N' ELSE 'Y' END
      FROM AIF_GL_LOAD_AUDIT aud
      WHERE aud.SOURCE_SYSTEM_ID = 3
      AND aud.SOURCE_LEDGER_ID = 1
      AND aud.GL_PERIOD_ID = 135
      AND aud.BALANCE_TYPE = 'A'
      AND aud.LAST_LOADID <> brl.LOADID
      AND aud.STATUS = 'RUNNING'
     ) GL_LOAD_AUDIT_RUNNING_FLAG
    FROM AIF_BAL_RULE_LOADS brl
    WHERE brl.LOADID = 300
2013-12-31 22:44:57,904 DEBUG [AIF]:
    INSERT INTO AIF_GL_LOAD_AUDIT ( LAST_LOADID
      ,DELTA_RUN_ID
      ,SOURCE_SYSTEM_ID
      ,SOURCE_LEDGER_ID
      ,GL_PERIOD_ID
      ,BALANCE_TYPE
      ,GL_EXTRACT_TYPE
      ,STATUS
     ) VALUES ( 300
      ,0
      ,3
      ,1
      ,135
      ,'A'
      ,'FULLREFRESH'
      ,'RUNNING'
2013-12-31 22:44:57,907 DEBUG [AIF]:
      DELETE FROM AIF_EBS_GL_BALANCES_STG
      WHERE SOURCE_SYSTEM_ID = 3
      AND SOURCE_COA_ID = 101
      AND SOURCE_LEDGER_ID = 1
      AND ACTUAL_FLAG = 'A'
      AND PERIOD_NAME = 'JAN-13'
2013-12-31 22:44:59,283 INFO [AIF]: LKM EBS/FS Extract Type - Load Audit AND Full Refresh - END
2013-12-31 22:45:06,507 INFO [AIF]: COMM End Process Detail - Update Process Detail - START
2013-12-31 22:45:06,514 DEBUG [AIF]:
    UPDATE AIF_PROCESS_DETAILS
    SET STATUS = 'SUCCESS'
    ,RECORDS_PROCESSED = CASE
      WHEN RECORDS_PROCESSED IS NULL THEN 0
      ELSE RECORDS_PROCESSED
    END + 57408
    ,EXECUTION_END_TIME = CURRENT_TIMESTAMP
    ,LAST_UPDATED_BY = CASE
      WHEN ('native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' IS NULL) THEN LAST_UPDATED_BY
      ELSE 'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER'
    END
    ,LAST_UPDATE_DATE = CURRENT_TIMESTAMP
    WHERE PROCESS_ID = 300
    AND ENTITY_TYPE = 'PROCESS_BAL_IMP'
    AND ENTITY_NAME = 'JAN-13'
2013-12-31 22:45:06,519 INFO [AIF]: COMM End Process Detail - Update Process Detail - END
2013-12-31 22:45:07,106 INFO [AIF]: EBS/FS Load Data - Load TDATASEG_T - START
2013-12-31 22:45:07,112 INFO [AIF]:
Import Data from Source for Period 'January 2013'
2013-12-31 22:45:07,115 DEBUG [AIF]:
    SELECT brl.PARTITIONKEY
    ,brl.CATKEY
    ,brl.PLAN_TYPE
    ,CASE brl.PLAN_TYPE
      WHEN 'PLAN1' THEN 1
      WHEN 'PLAN2' THEN 2
      WHEN 'PLAN3' THEN 3
      WHEN 'PLAN4' THEN 4
      WHEN 'PLAN5' THEN 5
      ELSE 0
    END PLAN_NUMBER
    ,brl.EXECUTION_MODE
    ,br.AMOUNT_TYPE
    ,br.BALANCE_SELECTION
    ,br.CURRENCY_CODE
    ,br.INCL_ZERO_BALANCE_FLAG
    ,br.BAL_SEG_VALUE_OPTION_CODE
    ,COALESCE(br.BALANCE_AMOUNT_BS, 'YTD') BALANCE_AMOUNT_BS
    ,COALESCE(br.BALANCE_AMOUNT_IS, 'PERIODIC') BALANCE_AMOUNT_IS
    FROM AIF_BAL_RULE_LOADS brl
    ,AIF_TARGET_APPLICATIONS app
    ,AIF_BALANCE_RULES br
    WHERE brl.LOADID = 300
    AND app.APPLICATION_ID = brl.APPLICATION_ID
    AND br.RULE_ID = brl.RULE_ID
2013-12-31 22:45:07,120 DEBUG [AIF]:
      SELECT PERIODKEY
      FROM TPOVPERIOD
      WHERE PERIODDESC = 'January 2013'
2013-12-31 22:45:07,122 INFO [AIF]:
Import Data from Source for Ledger 'JWR Books'
2013-12-31 22:45:07,125 DEBUG [AIF]:
      SELECT COA_SEGMENT_NAME
      ,ACCOUNT_TYPE_FLAG
      ,BALANCE_TYPE_FLAG
      FROM AIF_COA_SEGMENTS
      WHERE SOURCE_SYSTEM_ID = 3
      AND SOURCE_COA_ID = '101'
      AND (
        ACCOUNT_TYPE_FLAG = 'Y'
        OR BALANCE_TYPE_FLAG = 'Y'
2013-12-31 22:45:07,127 DEBUG [AIF]:
      SELECT adim.BALANCE_COLUMN_NAME DIMNAME
      ,adim.DIMENSION_ID
      ,dim.TARGET_DIMENSION_CLASS_NAME
      ,(SELECT COA_SEGMENT_NAME
        FROM AIF_COA_SEGMENTS cs
        WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID1
      ) COA_SEGMENT_NAME1
      ,(SELECT COA_SEGMENT_NAME
        FROM AIF_COA_SEGMENTS cs
        WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID2
      ) COA_SEGMENT_NAME2
      ,(SELECT COA_SEGMENT_NAME
        FROM AIF_COA_SEGMENTS cs
        WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID3
      ) COA_SEGMENT_NAME3
      ,(SELECT COA_SEGMENT_NAME
        FROM AIF_COA_SEGMENTS cs
        WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID4
      ) COA_SEGMENT_NAME4
      ,(SELECT COA_SEGMENT_NAME
        FROM AIF_COA_SEGMENTS cs
        WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID5
      ) COA_SEGMENT_NAME5
      ,(SELECT CASE mdd.ORPHAN_OPTION_CODE
          WHEN 'CHILD' THEN 'N'
          WHEN 'ROOT' THEN 'N'
          ELSE 'Y'
        END DIMENSION_FILTER_FLAG
        FROM AIF_MAP_DIM_DETAILS_V mdd
        ,AIF_MAPPING_RULES mr
        WHERE mr.PARTITIONKEY = tpp.PARTITIONKEY
        AND mdd.RULE_ID = mr.RULE_ID
        AND mdd.DIMENSION_ID = adim.DIMENSION_ID
      ) DIMENSION_FILTER_FLAG
      ,tiie.IMPCONCATCHAR
      FROM TPOVPARTITION tpp
      INNER JOIN AIF_TARGET_APPL_DIMENSIONS adim
        ON adim.APPLICATION_ID = 26
      INNER JOIN AIF_DIMENSIONS dim
        ON dim.DIMENSION_ID = adim.DIMENSION_ID
      LEFT OUTER JOIN TBHVIMPITEMERPI tiie
        ON tiie.IMPGROUPKEY = tpp.PARTIMPGROUP
        AND tiie.IMPFLDFIELDNAME = adim.BALANCE_COLUMN_NAME
        AND tiie.IMPMAPTYPE = 'ERP'
      WHERE tpp.PARTITIONKEY = 12
      AND adim.BALANCE_COLUMN_NAME IS NOT NULL
      ORDER BY adim.BALANCE_COLUMN_NAME
2013-12-31 22:45:07,154 DEBUG [AIF]:
        INSERT INTO TDATASEG_T (
      LOADID
      ,PARTITIONKEY
      ,CATKEY
      ,RULE_ID
      ,PERIODKEY
      ,VALID_FLAG
      ,CHANGESIGN
      ,CODE_COMBINATION_ID
      ,SOURCE_LEDGER_ID
      ,GL_PERIOD_YEAR
      ,GL_PERIOD_NUM
      ,YEAR
      ,PERIOD
      ,ATTR1
      ,ATTR2
      ,ATTR3
      ,ATTR4
      ,ATTR5
      ,ATTR6
      ,ATTR7
      ,ATTR8
      ,ATTR9
      ,ATTR10
      ,ATTR11
      ,ATTR12
      ,ATTR13
      ,ATTR14
        ,ACCOUNT
        ,ACCOUNTX
        ,ENTITY
        ,ENTITYX
        ,ICP
        ,ICPX
        ,UD1
        ,UD1X
        ,UD2
        ,UD2X
        ,UD3
        ,UD3X
        ,UD4
        ,UD4X
      ,DATAVIEW
          ,DATAKEY
          ,STAT_BALANCE_FLAG
          ,CURKEY
          ,AMOUNT_PTD
          ,AMOUNT_YTD
          ,AMOUNT
          ,AMOUNTX
      SELECT pprd.PROCESS_ID LOADID
      ,12 PARTITIONKEY
      ,4 CATKEY
      ,27 RULE_ID
      ,pprd.PERIODKEY
      ,'Y' VALID_FLAG
      ,0 CHANGESIGN
      ,ccid.CODE_COMBINATION_ID
      ,bal.SOURCE_LEDGER_ID
      ,pprd.GL_PERIOD_YEAR
      ,pprd.GL_PERIOD_NUM
      ,pprd.YEARTARGET YEAR
      ,pprd.PERIODTARGET PERIOD
      ,pprd.PROCESS_ID ATTR1
      ,bal.SOURCE_SYSTEM_ID ATTR2
      ,bal.SOURCE_LEDGER_ID ATTR3
      ,pprd.GL_PERIOD_YEAR ATTR4
      ,pprd.GL_PERIOD_NAME ATTR5
      ,bal.ACTUAL_FLAG ATTR6
      ,bal.BUDGET_VERSION_ID ATTR7
      ,bal.ENCUMBRANCE_TYPE_ID ATTR8
      ,ccid.ACCOUNT_TYPE ATTR9
      ,NULL ATTR10
      ,NULL ATTR11
      ,NULL ATTR12
      ,NULL ATTR13
      ,NULL ATTR14
        ,ccid.SEGMENT4 ACCOUNT
        ,NULL ACCOUNTX
        ,ccid.SEGMENT1 ENTITY
        ,NULL ENTITYX
        ,NULL ICP
        ,NULL ICPX
        ,ccid.SEGMENT5 UD1
        ,NULL UD1X
        ,ccid.SEGMENT3 UD2
        ,NULL UD2X
        ,ccid.SEGMENT6 UD3
        ,NULL UD3X
        ,ccid.SEGMENT2 UD4
        ,NULL UD4X
      ,( CASE WHEN ccid.ACCOUNT_TYPE IN ('R','E','D','C') THEN 'Periodic' ELSE 'YTD' END ) DATAVIEW
        ,TDATASEG_DATAKEY_S.NEXTVAL
        ,'N' STAT_BALANCE_FLAG
        ,bal.CURRENCY_CODE CURKEY
        ,( CASE WHEN ccid.ACCOUNT_TYPE IN ('A','E','D') THEN 1 ELSE -1 END ) * ( bal.PERIOD_NET_DR - bal.PERIOD_NET_CR ) AMOUNT_PTD
        ,( CASE WHEN ccid.ACCOUNT_TYPE IN ('A','E','D') THEN 1 ELSE -1 END ) * ( bal.BEGIN_BALANCE_DR - bal.BEGIN_BALANCE_CR + bal.PERIOD_NET_DR - bal.PERIOD_NET_CR ) AMOUNT_YTD
        ,( CASE WHEN ccid.ACCOUNT_TYPE IN ('A','E','D') THEN 1 ELSE -1 END ) *
        ( CASE
            WHEN ccid.ACCOUNT_TYPE IN ('R','E','D','C') THEN ( bal.PERIOD_NET_DR - bal.PERIOD_NET_CR )
            ELSE ( bal.BEGIN_BALANCE_DR - bal.BEGIN_BALANCE_CR + bal.PERIOD_NET_DR - bal.PERIOD_NET_CR )
          END
         AMOUNT
        ,( CASE WHEN ccid.ACCOUNT_TYPE IN ('A','E','D') THEN 1 ELSE -1 END ) *
        ( CASE
            WHEN ccid.ACCOUNT_TYPE IN ('R','E','D','C') THEN ( bal.PERIOD_NET_DR - bal.PERIOD_NET_CR )
            ELSE ( bal.BEGIN_BALANCE_DR - bal.BEGIN_BALANCE_CR + bal.PERIOD_NET_DR - bal.PERIOD_NET_CR )
          END
         AMOUNTX
      FROM AIF_EBS_GL_BALANCES_STG_V bal
      ,AIF_EBS_GL_CCID_STG ccid
      ,AIF_PROCESS_PERIODS pprd
      WHERE bal.SOURCE_SYSTEM_ID = 3
      AND bal.SOURCE_LEDGER_ID = 1
      AND bal.ACTUAL_FLAG = 'A'
      AND ccid.SOURCE_SYSTEM_ID = bal.SOURCE_SYSTEM_ID
      AND ccid.SOURCE_COA_ID = bal.SOURCE_COA_ID
      AND ccid.CODE_COMBINATION_ID = bal.CODE_COMBINATION_ID
      AND pprd.PROCESS_ID = 300
      AND pprd.PERIODKEY = '2013-01-01'
      AND pprd.SOURCE_LEDGER_ID = bal.SOURCE_LEDGER_ID
      AND pprd.GL_PERIOD_NAME = bal.PERIOD_NAME
        AND (
          bal.BEGIN_BALANCE_DR <> 0
          OR bal.BEGIN_BALANCE_CR <> 0
          OR bal.PERIOD_NET_DR <> 0
          OR bal.PERIOD_NET_CR <> 0
        AND bal.CURRENCY_CODE <> 'STAT'
          AND bal.TRANSLATED_FLAG IS NULL
2013-12-31 22:45:09,269 INFO [AIF]: Monetary Data Rows Imported from Source: 12590
2013-12-31 22:45:09,293 DEBUG [AIF]:
        INSERT INTO AIF_APPL_LOAD_AUDIT (
          LOADID
          ,TARGET_APPLICATION_TYPE
          ,TARGET_APPLICATION_NAME
          ,PLAN_TYPE
          ,SOURCE_LEDGER_ID
          ,EPM_YEAR
          ,EPM_PERIOD
          ,SNAPSHOT_FLAG
          ,PARTITIONKEY
          ,CATKEY
          ,RULE_ID
          ,PERIODKEY
          ,EXPORT_TO_TARGET_FLAG
        SELECT DISTINCT PROCESS_ID LOADID
        ,'HFM' TARGET_APPLICATION_TYPE
        ,'FMTEST2' TARGET_APPLICATION_NAME
        ,NULL PLAN_TYPE
        ,SOURCE_LEDGER_ID
        ,YEARTARGET EPM_YEAR
        ,PERIODTARGET EPM_PERIOD
        ,'Y' SNAPSHOT_FLAG
        ,12 PARTITIONKEY
        ,4 CATKEY
        ,27 RULE_ID
        ,PERIODKEY
        ,'N' EXPORT_TO_TARGET_FLAG
        FROM AIF_PROCESS_PERIODS
        WHERE PROCESS_ID = 300
        AND PERIODKEY = '2013-01-01'
        AND SOURCE_LEDGER_ID = 1
2013-12-31 22:45:09,297 DEBUG [AIF]:
        INSERT INTO AIF_APPL_LOAD_PRD_AUDIT (
          LOADID
          ,SOURCE_LEDGER_ID
          ,GL_PERIOD_ID
          ,DELTA_RUN_ID
          ,PARTITIONKEY
          ,CATKEY
          ,RULE_ID
          ,PERIODKEY
        SELECT DISTINCT pprd.PROCESS_ID LOADID
        ,pprd.SOURCE_LEDGER_ID
        ,pprd.PERIOD_ID GL_PERIOD_ID
        ,(SELECT MAX(gl.DELTA_RUN_ID)
          FROM AIF_GL_LOAD_AUDIT gl
          WHERE gl.SOURCE_SYSTEM_ID = 3
          AND gl.SOURCE_LEDGER_ID = pprd.SOURCE_LEDGER_ID
          AND gl.BALANCE_TYPE = 'A'
          AND gl.GL_PERIOD_ID = pprd.PERIOD_ID
        ) DELTA_RUN_ID
        ,12 PARTITIONKEY
        ,4 CATKEY
        ,27 RULE_ID
        ,pprd.PERIODKEY
        FROM AIF_PROCESS_PERIODS pprd
        WHERE pprd.PROCESS_ID = 300
        AND pprd.PERIODKEY = '2013-01-01'
        AND pprd.SOURCE_LEDGER_ID = 1
2013-12-31 22:45:09,302 INFO [AIF]:
Total Data Rows Imported from Source: 12590
2013-12-31 22:45:09,305 INFO [AIF]: EBS/FS Load Data - Load TDATASEG_T - END
2013-12-31 22:45:09,381 INFO [AIF]: COMM Update Data - Init DataLoadUtil - START
2013-12-31 22:45:09,385 INFO [AIF]: COMM Update Data - Init DataLoadUtil - END
2013-12-31 22:45:09,485 INFO [AIF]: COMM Update Data - Update TDATASEG_T/TDATASEGW - START
2013-12-31 22:45:09,491 DEBUG [AIF]:
      DELETE FROM TDATASEG_T
      WHERE LOADID = 300
      AND PARTITIONKEY = 12
      AND CATKEY = 4
      AND PERIODKEY = '2013-01-01'
      AND AMOUNT = 0
2013-12-31 22:45:09,559 WARN [AIF]:
Warning: Data rows with zero balances exist
2013-12-31 22:45:09,636 INFO [AIF]: Zero Balance Data Rows Deleted: 1879
2013-12-31 22:45:09,654 DEBUG [AIF]:
      SELECT DIMNAME
      ,CASE WHEN RULE_ID IS NULL THEN 'N' ELSE 'Y' END RULE_MAP_FLAG
      ,SRCKEY
      ,TARGKEY
      ,WHERECLAUSETYPE
      ,WHERECLAUSEVALUE
      ,CHANGESIGN
      ,SEQUENCE
      ,DATAKEY
      ,MAPPING_TYPE
      FROM (
        SELECT DISTINCT tdm.DIMNAME
        ,tdm.RULE_ID
        ,NULL SRCKEY
        ,NULL TARGKEY
        ,tdm.WHERECLAUSETYPE
        ,tdm.WHERECLAUSEVALUE
        ,NULL CHANGESIGN
        ,1 SEQUENCE
        ,COALESCE(tdm.SYSTEM_GENERATED_FLAG,'N') SYSTEM_GENERATED_FLAG
        ,NULL DATAKEY
        ,CASE
          WHEN tdm.WHERECLAUSETYPE IS NULL THEN 1
          ELSE 3
        END MAPPING_TYPE
        FROM TDATAMAP_T tdm
        WHERE tdm.LOADID = 300
        AND tdm.PARTITIONKEY = 12
        AND tdm.TDATAMAPTYPE = 'ERP'
        AND (tdm.RULE_ID IS NULL OR tdm.RULE_ID = 27)
        AND tdm.WHERECLAUSETYPE IS NULL
        UNION ALL
        SELECT tdm.DIMNAME
        ,tdm.RULE_ID
        ,tdm.SRCKEY
        ,tdm.TARGKEY
        ,tdm.WHERECLAUSETYPE
        ,tdm.WHERECLAUSEVALUE
        ,tdm.CHANGESIGN
        ,CASE tpp.PARTSEQMAP
          WHEN 0 THEN CASE
            WHEN (tdm.WHERECLAUSETYPE = 'MULTIDIM') THEN 2
            WHEN (tdm.WHERECLAUSETYPE = 'BETWEEN') THEN 3
            WHEN (tdm.WHERECLAUSETYPE = 'LIKE') THEN 4
            ELSE 0
          END
          ELSE tdm.SEQUENCE
        END SEQUENCE
        ,COALESCE(tdm.SYSTEM_GENERATED_FLAG,'N') SYSTEM_GENERATED_FLAG
        ,tdm.DATAKEY
        ,CASE
          WHEN tdm.WHERECLAUSETYPE IS NULL THEN 1
          ELSE 3
        END MAPPING_TYPE
        FROM TDATAMAP_T tdm
        INNER JOIN TPOVPARTITION tpp
          ON tpp.PARTITIONKEY = tdm.PARTITIONKEY
        WHERE tdm.LOADID = 300
        AND tdm.PARTITIONKEY = 12
        AND tdm.TDATAMAPTYPE = 'ERP'
        AND (tdm.RULE_ID IS NULL OR tdm.RULE_ID = 27)
        AND tdm.WHERECLAUSETYPE IN ('MULTIDIM','BETWEEN','LIKE')
      ) q
      ORDER BY DIMNAME
      ,RULE_ID
      ,SEQUENCE
      ,SYSTEM_GENERATED_FLAG
      ,SRCKEY
2013-12-31 22:45:09,672 INFO [AIF]:
Processing Mappings for Column 'ACCOUNT'
2013-12-31 22:45:09,677 DEBUG [AIF]:
        UPDATE TDATASEG_T
        SET ACCOUNTX = ACCOUNT
        ,ACCOUNTR = 121
        ,ACCOUNTF = 3
        ,AMOUNTX = AMOUNTX * 1
        ,CHANGESIGN = CASE 1
          WHEN -1 THEN CASE CHANGESIGN
            WHEN 1 THEN 0
            WHEN 0 THEN 1
            ELSE CHANGESIGN
          END
          ELSE CHANGESIGN
        END
        ,VALID_FLAG = CASE '*' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
        WHERE LOADID = 300
        AND PARTITIONKEY = 12
        AND CATKEY = 4
        AND PERIODKEY = '2013-01-01'
        AND ACCOUNTX IS NULL
        AND (1=1)
2013-12-31 22:45:10,044 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:10,053 INFO [AIF]:
Processing Mappings for Column 'ENTITY'
2013-12-31 22:45:10,057 DEBUG [AIF]:
        UPDATE TDATASEG_T
        SET ENTITYX = ENTITY
        ,ENTITYR = 122
        ,ENTITYF = 3
        ,AMOUNTX = AMOUNTX * 1
        ,CHANGESIGN = CASE 1
          WHEN -1 THEN CASE CHANGESIGN
            WHEN 1 THEN 0
            WHEN 0 THEN 1
            ELSE CHANGESIGN
          END
          ELSE CHANGESIGN
        END
        ,VALID_FLAG = CASE '*' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
        WHERE LOADID = 300
        AND PARTITIONKEY = 12
        AND CATKEY = 4
        AND PERIODKEY = '2013-01-01'
        AND ENTITYX IS NULL
        AND (1=1)
2013-12-31 22:45:10,426 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:10,435 DEBUG [AIF]:
        UPDATE TDATASEG_T
        SET ENTITYX = ENTITY
        ,ENTITYR = 132
        ,ENTITYF = 3
        ,AMOUNTX = AMOUNTX * 1
        ,CHANGESIGN = CASE 1
          WHEN -1 THEN CASE CHANGESIGN
            WHEN 1 THEN 0
            WHEN 0 THEN 1
            ELSE CHANGESIGN
          END
          ELSE CHANGESIGN
        END
        ,VALID_FLAG = CASE '*' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
        WHERE LOADID = 300
        AND PARTITIONKEY = 12
        AND CATKEY = 4
        AND PERIODKEY = '2013-01-01'
        AND ENTITYX IS NULL
        AND (1=1)
2013-12-31 22:45:10,446 INFO [AIF]: Data Rows Updated by Location Mapping 'DEFAULT' (LIKE): 0
2013-12-31 22:45:10,448 INFO [AIF]:
Processing Mappings for Column 'ICP'
2013-12-31 22:45:10,452 DEBUG [AIF]:
        UPDATE TDATASEG_T
        SET ICPX = '[ICP None]'
        ,ICPR = 130
        ,ICPF = 3
        ,AMOUNTX = AMOUNTX * 1
        ,CHANGESIGN = CASE 1
          WHEN -1 THEN CASE CHANGESIGN
            WHEN 1 THEN 0
            WHEN 0 THEN 1
            ELSE CHANGESIGN
          END
          ELSE CHANGESIGN
        END
        ,VALID_FLAG = CASE '[ICP None]' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
        WHERE LOADID = 300
        AND PARTITIONKEY = 12
        AND CATKEY = 4
        AND PERIODKEY = '2013-01-01'
        AND ICPX IS NULL
        AND (1=1)
2013-12-31 22:45:10,784 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:10,798 INFO [AIF]:
Processing Mappings for Column 'UD1'
2013-12-31 22:45:10,802 DEBUG [AIF]:
        UPDATE TDATASEG_T
        SET UD1X = '[None]'
        ,UD1R = 124
        ,UD1F = 3
        ,AMOUNTX = AMOUNTX * 1
        ,CHANGESIGN = CASE 1
          WHEN -1 THEN CASE CHANGESIGN
            WHEN 1 THEN 0
            WHEN 0 THEN 1
            ELSE CHANGESIGN
          END
          ELSE CHANGESIGN
        END
        ,VALID_FLAG = CASE '[None]' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
        WHERE LOADID = 300
        AND PARTITIONKEY = 12
        AND CATKEY = 4
        AND PERIODKEY = '2013-01-01'
        AND UD1X IS NULL
        AND (1=1)
2013-12-31 22:45:11,134 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:11,156 INFO [AIF]:
Processing Mappings for Column 'UD2'
2013-12-31 22:45:11,160 DEBUG [AIF]:
        UPDATE TDATASEG_T
        SET UD2X = '[None]'
        ,UD2R = 123
        ,UD2F = 3
        ,AMOUNTX = AMOUNTX * 1
        ,CHANGESIGN = CASE 1
          WHEN -1 THEN CASE CHANGESIGN
            WHEN 1 THEN 0
            WHEN 0 THEN 1
            ELSE CHANGESIGN
          END
          ELSE CHANGESIGN
        END
        ,VALID_FLAG = CASE '[None]' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
        WHERE LOADID = 300
        AND PARTITIONKEY = 12
        AND CATKEY = 4
        AND PERIODKEY = '2013-01-01'
        AND UD2X IS NULL
        AND (1=1)
2013-12-31 22:45:11,517 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:11,531 INFO [AIF]:
Processing Mappings for Column 'UD3'
2013-12-31 22:45:11,535 DEBUG [AIF]:
        UPDATE TDATASEG_T
        SET UD3X = '[None]'
        ,UD3R = 125
        ,UD3F = 3
        ,AMOUNTX = AMOUNTX * 1
        ,CHANGESIGN = CASE 1
          WHEN -1 THEN CASE CHANGESIGN
            WHEN 1 THEN 0
            WHEN 0 THEN 1
            ELSE CHANGESIGN
          END
          ELSE CHANGESIGN
        END
        ,VALID_FLAG = CASE '[None]' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
        WHERE LOADID = 300
        AND PARTITIONKEY = 12
        AND CATKEY = 4
        AND PERIODKEY = '2013-01-01'
        AND UD3X IS NULL
        AND (1=1)
2013-12-31 22:45:11,870 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:11,883 INFO [AIF]:
Processing Mappings for Column 'UD4'
2013-12-31 22:45:11,887 DEBUG [AIF]:
        UPDATE TDATASEG_T
        SET UD4X = '[None]'
        ,UD4R = 128
        ,UD4F = 3
        ,AMOUNTX = AMOUNTX * 1
        ,CHANGESIGN = CASE 1
          WHEN -1 THEN CASE CHANGESIGN
            WHEN 1 THEN 0
            WHEN 0 THEN 1
            ELSE CHANGESIGN
          END
          ELSE CHANGESIGN
        END
        ,VALID_FLAG = CASE '[None]' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
        WHERE LOADID = 300
        AND PARTITIONKEY = 12
        AND CATKEY = 4
        AND PERIODKEY = '2013-01-01'
        AND UD4X IS NULL
        AND (1=1)
2013-12-31 22:45:12,192 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:12,204 DEBUG [AIF]:
      UPDATE TDATASEG_T
      SET ATTR14 = DATAKEY
      WHERE LOADID = 300
      AND PARTITIONKEY = 12
      AND CATKEY = 4
      AND PERIODKEY = '2013-01-01'
2013-12-31 22:45:12,739 DEBUG [AIF]:
          UPDATE TDATASEG_T
          SET VALID_FLAG = 'N'
          WHERE 1=1
          AND (
            (1=0)
          OR TDATASEG_T.ACCOUNTX IS NULL
          OR TDATASEG_T.ENTITYX IS NULL
          OR TDATASEG_T.ICPX IS NULL
          OR TDATASEG_T.UD1X IS NULL
          OR TDATASEG_T.UD2X IS NULL
          OR TDATASEG_T.UD3X IS NULL
          OR TDATASEG_T.UD4X IS NULL
          AND LOADID = 300
          AND PARTITIONKEY = 12
          AND CATKEY = 4
          AND PERIODKEY = '2013-01-01'
          AND VALID_FLAG = 'Y'
2013-12-31 22:45:12,754 INFO [AIF]:
Total Data Rows available for Export to Target: 10711
2013-12-31 22:45:12,773 INFO [AIF]: COMM Update Data - Update TDATASEG_T/TDATASEGW - END
2013-12-31 22:45:12,808 INFO [AIF]: COMM End Process Detail - Update Process Detail - START
2013-12-31 22:45:12,823 DEBUG [AIF]:
    UPDATE AIF_PROCESS_DETAILS
    SET STATUS = 'SUCCESS'
    ,RECORDS_PROCESSED = CASE
      WHEN RECORDS_PROCESSED IS NULL THEN 0
      ELSE RECORDS_PROCESSED
    END + 10711
    ,EXECUTION_END_TIME = CURRENT_TIMESTAMP
    ,LAST_UPDATED_BY = CASE
      WHEN ('native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' IS NULL) THEN LAST_UPDATED_BY
      ELSE 'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER'
    END
    ,LAST_UPDATE_DATE = CURRENT_TIMESTAMP
    WHERE PROCESS_ID = 300
    AND ENTITY_TYPE = 'PROCESS_BAL_TRANS'
    AND ENTITY_NAME = 'January 2013'
2013-12-31 22:45:12,829 INFO [AIF]: COMM End Process Detail - Update Process Detail - END
2013-12-31 22:45:12,987 INFO [AIF]: COMM Update YTD Amounts - Update YTD Amounts - START
2013-12-31 22:45:12,993 DEBUG [AIF]:
        SELECT brl.PARTITIONKEY
        ,brl.CATKEY
        ,pprd.YEARTARGET
        ,pprd.PERIODTARGET
        ,pprd.SOURCE_LEDGER_ID
        FROM AIF_BAL_RULE_LOADS brl
        ,AIF_PROCESS_PERIODS pprd
        WHERE brl.LOADID = 300
        AND pprd.PROCESS_ID = brl.LOADID
        GROUP BY brl.PARTITIONKEY
        ,brl.CATKEY
        ,pprd.YEARTARGET
        ,pprd.PERIODTARGET
        ,pprd.SOURCE_LEDGER_ID
        HAVING COUNT(*) > 1
2013-12-31 22:45:12,995 INFO [AIF]: COMM Update YTD Amounts - Update YTD Amounts - END
2013-12-31 22:45:13,052 INFO [AIF]: COMM Load TDATAMAPSEG/TDATASEG - Load TDATAMAPSEG/TDATASEG - START
2013-12-31 22:45:13,057 DEBUG [AIF]:
    SELECT brl.PARTITIONKEY
    ,brl.CATKEY
    ,brl.EXECUTION_MODE
    FROM AIF_BAL_RULE_LOADS brl
    WHERE brl.LOADID = 300
2013-12-31 22:45:13,059 DEBUG [AIF]:
    SELECT PERIODKEY
    FROM AIF_APPL_LOAD_AUDIT
    WHERE LOADID = 300
    AND PARTITIONKEY = 12
    AND CATKEY = 4
    AND RULE_ID = 27
    ORDER BY PERIODKEY
2013-12-31 22:45:13,061 INFO [AIF]:
Processing Data for PeriodKey '2013-01-01'
2013-12-31 22:45:13,065 DEBUG [AIF]:
    DELETE FROM TDATAMAPSEG
    WHERE PARTITIONKEY = 12
    AND CATKEY = 4
    AND PERIODKEY = '2013-01-01'
    AND (
      TDATAMAPTYPE = 'ERP'
      OR (
        TDATAMAPTYPE = 'MULTIDIM'
        AND EXISTS (
          SELECT 1
          FROM TDATAMAPSEG parent
          WHERE parent.PARTITIONKEY = TDATAMAPSEG.PARTITIONKEY
          AND parent.DATAKEY = TDATAMAPSEG.TARGKEY
          AND parent.CATKEY = TDATAMAPSEG.CATKEY
          AND parent.PERIODKEY = TDATAMAPSEG.PERIODKEY
          AND parent.TDATAMAPTYPE = 'ERP'
2013-12-31 22:45:13,074 INFO [AIF]: Number of Rows deleted from TDATAMAPSEG: 8
2013-12-31 22:45:13,077 DEBUG [AIF]:
    INSERT INTO TDATAMAPSEG (
      DATAKEY
      ,PARTITIONKEY
      ,CATKEY
      ,PERIODKEY
      ,DIMNAME
      ,SRCKEY
      ,SRCDESC
      ,TARGKEY
      ,WHERECLAUSETYPE
      ,WHERECLAUSEVALUE
      ,CHANGESIGN
      ,SEQUENCE
      ,VBSCRIPT
      ,TDATAMAPTYPE
      ,SYSTEM_GENERATED_FLAG
    SELECT DATAKEY
    ,PARTITIONKEY
    ,4
    ,'2013-01-01'
    ,DIMNAME
    ,SRCKEY
    ,SRCDESC
    ,TARGKEY
    ,WHERECLAUSETYPE
    ,WHERECLAUSEVALUE
    ,CHANGESIGN
    ,SEQUENCE
    ,VBSCRIPT
    ,TDATAMAPTYPE
    ,SYSTEM_GENERATED_FLAG
    FROM TDATAMAP_T
    WHERE LOADID = 300
2013-12-31 22:45:13,081 INFO [AIF]: Number of Rows inserted into TDATAMAPSEG: 8
2013-12-31 22:45:13,083 DEBUG [AIF]:
        DELETE FROM TDATASEG
        WHERE LOADID < 300
        AND PARTITIONKEY = 12
        AND CATKEY = 4
        AND RULE_ID = 27
        AND PERIODKEY = '2013-01-01'
2013-12-31 22:45:15,659 INFO [AIF]: Number of Rows deleted from TDATASEG: 10711
2013-12-31 22:45:15,728 DEBUG [AIF]:
      INSERT INTO TDATASEG (
      DATAKEY
      ,PARTITIONKEY
      ,CATKEY
      ,PERIODKEY
      ,CURKEY
      ,DATAVIEW
      ,CALCACCTTYPE
      ,CHANGESIGN
      ,JOURNALID
      ,AMOUNT
      ,AMOUNTX
      ,AMOUNT_PTD
      ,AMOUNT_YTD
      ,DESC1
      ,DESC2
      ,ACCOUNT
      ,ACCOUNTX
      ,ACCOUNTR
      ,ACCOUNTF
      ,ENTITY
      ,ENTITYX
      ,ENTITYR
      ,ENTITYF
      ,ICP
      ,ICPX
      ,ICPR
      ,ICPF
      ,UD1
      ,UD1X
      ,UD1R
      ,UD1F
      ,UD2
      ,UD2X
      ,UD2R
      ,UD2F
      ,UD3
      ,UD3X
      ,UD3R
      ,UD3F
      ,UD4
      ,UD4X
      ,UD4R
      ,UD4F
      ,UD5
      ,UD5X
      ,UD5R
      ,UD5F
      ,UD6
      ,UD6X
      ,UD6R
      ,UD6F
      ,UD7
      ,UD7X
      ,UD7R
      ,UD7F
      ,UD8
      ,UD8X
      ,UD8R
      ,UD8F
      ,UD9
      ,UD9X
      ,UD9R
      ,UD9F
      ,UD10
      ,UD10X
      ,UD10R
      ,UD10F
      ,UD11
      ,UD11X
      ,UD11R
      ,UD11F
      ,UD12
      ,UD12X
      ,UD12R
      ,UD12F
      ,UD13
      ,UD13X
      ,UD13R
      ,UD13F
      ,UD14
      ,UD14X
      ,UD14R
      ,UD14F
      ,UD15
      ,UD15X
      ,UD15R
      ,UD15F
      ,UD16
      ,UD16X
      ,UD16R
      ,UD16F
      ,UD17
      ,UD17X
      ,UD17R
      ,UD17F
      ,UD18
      ,UD18X
      ,UD18R
      ,UD18F
      ,UD19
      ,UD19X
      ,UD19R
      ,UD19F
      ,UD20
      ,UD20X
      ,UD20R
      ,UD20F
      ,ATTR1
      ,ATTR2
      ,ATTR3
      ,ATTR4
      ,ATTR5
      ,ATTR6
      ,ATTR7
      ,ATTR8
      ,ATTR9
      ,ATTR10
      ,ATTR11
      ,ATTR12
      ,ATTR13
      ,ATTR14
      ,ARCHIVEID
      ,HASMEMOITEM
      ,STATICDATAKEY
      ,LOADID
      ,RULE_ID,
      CODE_COMBINATION_ID
      ,STAT_BALANCE_FLAG
      ,VALID_FLAG
      SELECT
      DATAKEY
      ,PARTITIONKEY
      ,CATKEY
      ,PERIODKEY
      ,CURKEY
      ,DATAVIEW
      ,CALCACCTTYPE
      ,CHANGESIGN
      ,JOURNALID
      ,AMOUNT
      ,AMOUNTX
      ,AMOUNT_PTD
      ,AMOUNT_YTD
      ,DESC1
      ,DESC2
      ,ACCOUNT
      ,ACCOUNTX
      ,ACCOUNTR
      ,ACCOUNTF
      ,ENTITY
      ,ENTITYX
      ,ENTITYR
      ,ENTITYF
      ,ICP
      ,ICPX
      ,ICPR
      ,ICPF
      ,UD1
      ,UD1X
      ,UD1R
      ,UD1F
      ,UD2
      ,UD2X
      ,UD2R
      ,UD2F
      ,UD3
      ,UD3X
      ,UD3R
      ,UD3F
      ,UD4
      ,UD4X
      ,UD4R
      ,UD4F
      ,UD5
      ,UD5X
      ,UD5R
      ,UD5F
      ,UD6
      ,UD6X
      ,UD6R
      ,UD6F
      ,UD7
      ,UD7X
      ,UD7R
      ,UD7F
      ,UD8
      ,UD8X
      ,UD8R
      ,UD8F
      ,UD9
      ,UD9X
      ,UD9R
      ,UD9F
      ,UD10
      ,UD10X
      ,UD10R
      ,UD10F
      ,UD11
      ,UD11X
      ,UD11R
      ,UD11F
      ,UD12
      ,UD12X
      ,UD12R
      ,UD12F
      ,UD13
      ,UD13X
      ,UD13R
      ,UD13F
      ,UD14
      ,UD14X
      ,UD14R
      ,UD14F
      ,UD15
      ,UD15X
      ,UD15R
      ,UD15F
      ,UD16
      ,UD16X
      ,UD16R
      ,UD16F
      ,UD17
      ,UD17X
      ,UD17R
      ,UD17F
      ,UD18
      ,UD18X
      ,UD18R
      ,UD18F
      ,UD19
      ,UD19X
      ,UD19R
      ,UD19F
      ,UD20
      ,UD20X
      ,UD20R
      ,UD20F
      ,ATTR1
      ,ATTR2
      ,ATTR3
      ,ATTR4
      ,ATTR5
      ,ATTR6
      ,ATTR7
      ,ATTR8
      ,ATTR9
      ,ATTR10
      ,ATTR11
      ,ATTR12
      ,ATTR13
      ,ATTR14
      ,ARCHIVEID
      ,HASMEMOITEM
      ,STATICDATAKEY
      ,LOADID
      ,RULE_ID,
      CODE_COMBINATION_ID
      ,STAT_BALANCE_FLAG
      ,VALID_FLAG
      FROM TDATASEG_T
      WHERE LOADID = 300
      AND PARTITIONKEY = 12
      AND CATKEY = 4
      AND PERIODKEY = '2013-01-01'
2013-12-31 22:45:16,838 INFO [AIF]: Number of Rows inserted into TDATASEG: 10711
2013-12-31 22:45:16,858 DEBUG [AIF]:
    DELETE FROM TDATASEG_T
    WHERE LOADID = 300
    AND PARTITIONKEY = 12
    AND CATKEY = 4
    AND PERIODKEY = '2013-01-01'
2013-12-31 22:45:17,123 INFO [AIF]: Number of Rows deleted from TDATASEG_T: 10711
2013-12-31 22:45:17,153 DEBUG [AIF]:
    DELETE FROM TDATAMAP_T
    WHERE LOADID = 300
2013-12-31 22:45:17,156 INFO [AIF]: Number of Rows deleted from TDATAMAP_T: 8
2013-12-31 22:45:17,161 INFO [AIF]: COMM Load TDATAMAPSEG/TDATASEG - Load TDATAMAPSEG/TDATASEG - END
2013-12-31 22:45:17,993 DEBUG [AIF]:
SELECT CASE app.METADATA_LOAD_METHOD
    WHEN 'EPMA' THEN CASE dim.TARGET_DIMENSION_CLASS_NAME
      WHEN 'Generic' THEN dim.TARGET_DIMENSION_NAME
      ELSE dim.TARGET_DIMENSION_CLASS_NAME
    END
    ELSE dim.TARGET_DIMENSION_NAME
END TARGET_DIMENSION_NAME
,adim.BALANCE_COLUMN_NAME
FROM AIF_TARGET_APPLICATIONS app
,AIF_TARGET_APPL_DIMENSIONS adim
,AIF_DIMENSIONS dim
WHERE app.APPLICATION_ID = 26
AND adim.APPLICATION_ID = app.APPLICATION_ID
AND dim.DIMENSION_ID = adim.DIMENSION_ID
AND dim.TARGET_DIMENSION_CLASS_NAME IN ('Custom1','Custom2','Custom3','Custom4','Generic')
2013-12-31 22:45:17,997 DEBUG [AIF]:
SELECT SCENARIO "Scenario"
,YEAR "Year"
,PERIOD "Period"
,DATAVIEW "View"
,DATAVALUE "Value"
,ACCOUNT "Account"
,ENTITY "Entity"
,ICP "ICP"
    ,UD2 "Area"
    ,UD1 "Tail"
    ,UD3 "Special"
    ,UD4 "Facility"
,AMOUNT "DataValue"
FROM AIF_HS_BALANCES
WHERE LOADID = 300
2013-12-31 22:45:18,000 INFO [SimpleAsyncTaskExecutor-9]: ODI Hyperion Financial Management Adapter
2013-12-31 22:45:18,002 INFO [SimpleAsyncTaskExecutor-9]: Load task initialized.
2013-12-31 22:45:18,028 INFO [AIF]: LKM COMM Load Data into HFM - Load Data to HFM - START
2013-12-31 22:45:18,031 DEBUG [AIF]:
    INSERT INTO AIF_PROCESS_DETAILS (
      PROCESS_ID
      ,ENTITY_TYPE
      ,ENTITY_ID
      ,ENTITY_NAME
      ,ENTITY_NAME_ORDER
      ,TARGET_TABLE_NAME
      ,EXECUTION_START_TIME
      ,EXECUTION_END_TIME
      ,RECORDS_PROCESSED
      ,STATUS
      ,LAST_UPDATED_BY
      ,LAST_UPDATE_DATE
    ) VALUES (
      300
      ,'PROCESS_BAL_EXP_HFM'
      ,NULL
      ,'FMTEST2'
      ,NULL
      ,NULL
      ,CURRENT_TIMESTAMP
      ,NULL
      ,NULL
      ,'RUNNING'
      ,'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER'
      ,CURRENT_TIMESTAMP
2013-12-31 22:45:18,034 INFO [SimpleAsyncTaskExecutor-9]: Connecting to Financial Management application [FMTEST2] on [10.150.20.40] using user-name [admin].
2013-12-31 22:45:18,155 INFO [SimpleAsyncTaskExecutor-9]: Connected to Financial Management application.
2013-12-31 22:45:18,157 INFO [SimpleAsyncTaskExecutor-9]: HFM Version: 11.1.2.2.300.
2013-12-31 22:45:18,160 INFO [SimpleAsyncTaskExecutor-9]: Options for the Financial Management load task are:
<Options>
     <Option name=LOG_FILE_NAME value=C:\Windows\TEMP\/aif_501_300.log/>
     <Option name=IMPORT_MODE value=Replace/>
     <Option name=CONSOLIDATE_ONLY value=false/>
     <Option name=CONSOLIDATE_PARAMETERS value=""/>
     <Option name=LOG_ENABLED value=true/>
     <Option name=ACCUMULATE_WITHIN_FILE value=false/>
     <Option name=DEBUG_ENABLED value=true/>
     <Option name=CONSOLIDATE_AFTER_LOAD value=false/>
     <Option name=FILE_CONTAINS_SHARE_DATA value=false/>
</Options>
2013-12-31 22:45:18,168 INFO [SimpleAsyncTaskExecutor-9]: Load Options validated.
2013-12-31 22:45:18,176 ERROR [SimpleAsyncTaskExecutor-9]: Error occurred during load process ORA-00904: "DATAVALUE": invalid identifier
com.hyperion.odi.common.ODIHAppException: ORA-00904: "DATAVALUE": invalid identifier
at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:216)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:175)
at org.python.core.PyObject.__call__(PyObject.java:355)
at org.python.core.PyMethod.__call__(PyMethod.java:215)
at org.python.core.PyMethod.instancemethod___call__(PyMethod.java:221)
at org.python.core.PyMethod.__call__(PyMethod.java:206)
at org.python.core.PyObject.__call__(PyObject.java:397)
at org.python.core.PyObject.__call__(PyObject.java:401)
at org.python.pycode._pyx161.f$0(<string>:98)
at org.python.pycode._pyx161.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java:165)
at org.python.core.PyCode.call(PyCode.java:18)
at org.python.core.Py.runCode(Py.java:1204)
at org.python.core.Py.exec(Py.java:1248)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:172)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1889)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$2.doAction(StartScenRequestProcessor.java:580)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:513)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$StartScenTask.doExecute(StartScenRequestProcessor.java:1066)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:724)
Caused by: java.sql.SQLSyntaxErrorException: ORA-00904: "DATAVALUE": invalid identifier
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
at oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:942)
at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1283)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1441)
at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1690)
at oracle.jdbc.driver.OracleStatementWrapper.executeQuery(OracleStatementWrapper.java:446)
at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:212)
... 38 more
2013-12-31 22:45:18,208 DEBUG [AIF]:
    UPDATE AIF_PROCESS_DETAILS
    SET STATUS = 'FAILED'
    ,RECORDS_PROCESSED = CASE
      WHEN RECORDS_PROCESSED IS NULL THEN 0
      ELSE RECORDS_PROCESSED
    END + 0
    ,EXECUTION_END_TIME = CURRENT_TIMESTAMP
    ,LAST_UPDATED_BY = CASE
      WHEN ('native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' IS NULL) THEN LAST_UPDATED_BY
      ELSE 'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER'
    END
    ,LAST_UPDATE_DATE = CURRENT_TIMESTAMP
    WHERE PROCESS_ID = 300
    AND ENTITY_TYPE = 'PROCESS_BAL_EXP_HFM'
    AND ENTITY_NAME = 'FMTEST2'
2013-12-31 22:45:18,210 FATAL [AIF]: Error in LKM C

The issue is that you are mapping "Data Value" to amount in the Target Application import format:
SELECT SCENARIO "Scenario"
,YEAR "Year"
,PERIOD "Period"
,DATAVIEW "View"
,DATAVALUE "Value"
,ACCOUNT "Account"
,ENTITY "Entity"
,ICP "ICP"
    ,UD2 "Area"
    ,UD1 "Tail"
    ,UD3 "Special"
    ,UD4 "Facility"
,AMOUNT "DataValue"
FROM AIF_HS_BALANCES
WHERE LOADID = 300
You need to map AMOUNT to "AMOUNT" in the HFM Application. Check that the dimension mapping is correct for the class in the target application and that your import format is going to the proper target dimension(Amount).

Error while Loading data through .csv file

Hi,
I am getting below date error when loading data through into Olap tables through .csv file.
Data stored in .csv is 20071113121100.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TE_7007 Transformation Evaluation Error [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')]
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11132 Transformation [Exp_FILE_CHNL_TYPE] had an error evaluating output column [CREATED_ON_DT_OUT]. Error message is [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')].
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11019 There is an error in the port [CREATED_ON_DT_OUT]: The default value for the port is set to: ERROR(<<Expression Error>> [ERROR]: transformation error
... nl:ERROR(u:'transformation error')).
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11021 An error occurred moving data from the transformation Exp_FILE_CHNL_TYPE: to the transformation W_CHNL_TYPE_DS.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> CMN_1086 Exp_FILE_CHNL_TYPE: Number of errors exceeded threshold [1].
Any help is greatly appreciated.
Thanks,
Poojak

1) Wrong format, you wont get much support loading OLAP cubes in here I think.
2) Has your CSV file been anywhere near excel by chance the conversion of 20071113121100 to 2.00711E+13 looks very much like what I see when Excel has an invalid number mask / precision specified for a cell.
*** We are using EBS. File was already generated by consultants through SQL query. Getting error while loading though Informatica. Target table is setup as date datatype and source is String(19).
Expression in Informatica is setup as below.
IIF(ISNULL(CREATED_ON_DT), NULL, TO_DATE(CREATED_ON_DT, 'YYYYMMDDHH24MISS'))
Thanks,
Poojak

Error while loading data into BW (BW as Target) using Data Services

Hello,
I'm trying to extract data from SQL Server 2012 and load into BW 7.3 using Data Services. Data Services shows that the job is finished successfully. But, when I go into BW, I'm seeing the below / attached error.
Error while accessing repository Violation of PRIMARY KEY constraint 'PK__AL_BW_RE_
Please let me know what this means and how to fix this. Not sure if I gave the sufficient information. Please let me know if you need any other information.
Thanks
Pradeep

Hi Pradeep,
Regarding your query please refer below SCN thread for the same issue:
SCN Thread:
FIM10 to BW 73- Violation of PRIMARY KEY -table AL_BW_REQUEST
Error in loading data from BOFC to BW using FIM 10.0
Thanks,
Daya

Error while Loading data to InfoCube

Similar Messages

Maybe you are looking for