Error while loading from R/3 TO BW ie 0material error
my is leela,
hai i am BW CONSULTANT.i got some problem in
loading s.d billing document ie 2lis_13_vahdr (billing document header data).the problem is i got 0material error
ie some characterisics are entered in material field.
these are ERSTE HILFE AND COACHING. these two are inserted in that field.i copied these once and executed in RSKC t.code ,but it is not accepting ,so pls kindly go through this ,give me a solution for this error .thank you.bye my mail id is [email protected]
Leela
Welcome to SDN
Your 0Material has incorrect Data in R/3 system. Now you have two options
1 Ask your R/3 team to correct this in R/3 who is responsible for this material.
2 In BW correct it in PSA and load it to cube/ODS
Hope this helps
Thanks
Sat
Similar Messages
-
Error while loading from PSA to Cube. RSM2-704 & RSAR -119
Dear Gurus,
I have to extract about 1.13 million records from set up tables to the MM cube 0IC_C03. While doing, the following two errors occured while loading from the psa to the cube:
Error ID - RSM2 & error no. 704: Data records in the PSA were marked for data package 39 . Here there were 2 errors. The system wrote information or warnings for the remaining data records.
Error ID- RSAR & No. 119: The update delivered the error code 4 .
(Data records for package 39 selected in PSA - 2 error(s). Record 5129 :No SID found for value 'EMN ' of characteristic 0BASE_UOM . Record 5132 :No SID found for value 'EMN ' of characteristic 0BASE_UOM )
I tried to change the defective records in psa by deleting the erraneous field value EMN and tried to load but failed.
Now, my questions are:
How can I resolve the issue ?
(ii) How to rectify the erraneous record ? should we only delete the erraneous field value or delete the entire record from the psa.
(iii) How to delete a record from psa.
Thanks & regards,
Sheeja.Hi,
Data records for package 39 selected in PSA - 2 error(s). Record 5129 :No SID found for value 'EMN ' of characteristic 0BASE_UOM . Record 5132 :No SID found for value 'EMN ' of characteristic 0BASE_UOM
The issue with record no. 5129 and 5132.
In PSA check errorneous records and it will display only the error records, you just edit as per the require and try reloading into cube.
Deleting single record is not possible.
Let us know if you still have any issues.
Reg
Pra -
Transformation Rule: Error while loading from PSA to ODS using DTP
Hi Experts,
I am trying to load data from PSA to ODS using DTP. For about 101 records I get the following error:
"Runtime error while executing rule -> see long text RSTRAN 301"
On further looking at the long text:
Diagnosis
An error occurred while executing a transformation rule:
The exact error message is:
Overflow converting from ''
The error was triggered at the following point in the program:
GP4808B5A4QZRB6KTPVU57SZ98Z 3542
System Response
Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
o Transformation ID
o Data record number of the source record
o Number and name of the rule which produced the error
Procedure for System Administration
When looking at the detail:
Error Location: Object Type TRFN
Error Location: Object Name 06BOK6W69BGQJR41BXXPE8EMPP00G6HF
Error Location: Operation Type DIRECT
Error Location: Operation Name
Error Location: Operation ID 00177 0000
Error Severity 100
Original Record: Segment 0001
Original Record: Number 2
Pls can anyone help in deducing and pointing this error to the exact spot in the transformation rule
Thanks & Regards,
RajJerome,
The same issue.
Here are some fields which are different in terms of length when mapped in transformation rules
ODS |Data Source
PROD_CATEG CHAR32 |Category_GUID RAW 16
CRM_QTYEXP INT4 |EXPONENT INT2
CRM_EXCRAT FLTP16 |EXCHG_RATE Dec 9
CRM_GWEIGH QUAN 17, 3 |Gross_Weight QUAN 15
NWEIGH QUAN 17, 3 |Net_Weight QUAN 15
CRMLREQDAT DATS 8 |REQ_DLV_DATE Dec 15
The difference is either some dats field are mapped to decimal, or the char 32 field is mapped to raw 16 OR Calweek, Calmonth is mapped to Calday
Both mostly all the ods field size is greater than the input source field.
Thanks
Raj -
Hi,
We are facing some issue while loading the data from R/3 to BW using DTP.
We are getting the error (both for full and delta)as follows:
Data package 1:Errors during Processing
* Extraction datasource*
* Filter out new records with same key.*
* RSDS material*
* Update to datastore object*
* Unpack data package*
* Exception in substep:write data package*
* Processing terminated.*
* Set technical status to red*
* Set overall status to red*
* Set overall status to green*
* Further processing started*
* Set status to u2018Processed furtheru2019*
The expansion of the error Exception in substep: write data package:
Record 0, segment 0001 is not in teh cross-record table
Error while writing error stack
Record 0, segment 0001 is not in the cross-record table
Error in substep update to DataStore Object
We are using both start routine and end routine in the transformation.
Any help on this is highly appreciable.
End routine:
IF NOT RESULT_PACKAGE IS INITIAL.
SELECT salesorg comp_code FROM /bi0/psalesorg
INTO TABLE it_salesorg
FOR ALL ENTRIES IN RESULT_PACKAGE
WHERE salesorg = RESULT_PACKAGE-SALESORG
AND objvers = 'A'.
SELECT /bic/ZMATRTUGP FROM /bic/pZMATRTUGP
INTO TABLE it_mat
FOR ALL ENTRIES IN RESULT_PACKAGE
WHERE /bic/ZMATRTUGP = RESULT_PACKAGE-/bic/ZMATRTUGP.
it_data[] = RESULT_PACKAGE[].
ENDIF.
get company code from salesorg for all material
LOOP AT it_data INTO st_data.
w_tabix = sy-tabix.
READ TABLE it_salesorg INTO st_salesorg
WITH TABLE KEY salesorg = st_data-salesorg.
IF sy-subrc = 0.
st_data-comp_code = st_salesorg-compcode.
MODIFY it_data FROM st_data INDEX w_tabix.
ENDIF.
ENDLOOP.
REFRESH RESULT_PACKAGE.
RESULT_PACKAGE[] = it_data[].
*Finally check for each material if something has changed since the last
*loading : if yes compare and update, otherwise no upload
IF NOT it_mat[] IS INITIAL.
SELECT * FROM /bic/azalomrtu00
INTO TABLE it_check
FOR ALL ENTRIES IN it_mat
WHERE /bic/ZMATRTUGP = it_mat-zmaterial.
ENDIF.
DELETE it_check WHERE salesorg IS INITIAL.
CLEAR st_result_package.
LOOP AT RESULT_PACKAGE INTO st_RESULT_PACKAGE.
READ TABLE it_check INTO st_check
WITH TABLE KEY
/bic/ZMATRTUGP = st_result_package-/bic/ZMATRTUGP
CUST_GRP4 = st_result_package-CUST_GRP4
SALESORG = st_result_package-SALESORG
VALIDTO = st_result_package-VALIDTO.
IF sy-subrc = 0.
*If one of the characteristic is different, let that entry in the
*result_package otherwise no use updating it
IF st_check-/BIC/ZCSBRTUGP = st_result_package-/BIC/ZCSBRTUGP
AND st_check-/BIC/ZCONDTYPE = st_result_package-/BIC/ZCONDTYPE
AND st_check-comp_code = st_result_package-comp_code
AND st_check-/BIC/ZCNT_RTU = st_result_package-/bic/ZCNT_RTU
AND st_check-VALIDFROM = st_result_package-VALIDFROM.
DELETE RESULT_PACKAGE.
ELSE.
*entry is new : let it updated.
ENDIF.
DELETE it_check WHERE
/bic/ZMATRTUGP = st_result_package-/bic/ZMATRTUGP
AND CUST_GRP4 = st_result_package-CUST_GRP4
AND SALESORG = st_result_package-SALESORG
AND VALIDTO = st_result_package-VALIDTO.
ENDIF.
ENDLOOP.
*if some entries are in the ODS but not in the datapackage, they have to
*be deleted in the ODS since they don't exist anymore
LOOP AT it_check INTO st_check.
CLEAR st_result_package.
st_result_package-/bic/ZMATRTUGP = st_check-/bic/ZMATRTUGP.
st_result_package-CUST_GRP4 = st_check-CUST_GRP4.
st_result_package-SALESORG = st_check-SALESORG.
st_result_package-VALIDTO = st_check-VALIDTO.
st_result_package-recordmode = 'D'.
APPEND st_result_package TO RESULT_PACKAGE.
ENDLOOP.
Thanks in advance.
Thanks,
MeghanaHi Meghana
HAve you got an short dump in ST22 transaction ?
If yes, what is it ?
In your routine, maybe you should as well add a counter for index in your loop :
DATA : w_idx like sy-tabix.
When you loop at result_package, do : w_idx = sy-tabix.
And make : DELETE result_package INDEX w_idex.
Hope it helps you
Mickael -
Error while loading from DSO to DSO in BI
Hi All,
While we are loaind the data from base DSO to Target DSO. Using DTP we are getting the following error. Could any one please provide me the solution for this.
"The argument 'B' cannot be interpreted as a number"
i am getting the above message. The lload is successfull from R3 to base DSO, but the same data is ffailed in target DSO.
Helpful answers will be rewared with the points.
Many thanks,
KhajaHi Siva,
thanks for ur reply. Mapping in transformation is Ok. And we are using the same info objects which we have used in base DSO. The load is successfull to the base DSO it got failed in target DSO.
How to know to which info object it is throwing the error. we have 80 info objects. even in log also it is not giving the info object name.
Thanks
Khaja -
Error while loading from ODS to CUBE
Hi guys,
I am loading data from source system to ODS and from ODS to CUBE. Ok. The data came successfully from Source System to ODS. But while coming to ODS to CUBE it is showing some error at Data Packet 13. Ok. In CUBE, I loaded the data by using update ODS data to data target, at that time it shows two options like FULL UPDATE and INIT UPDATE. Then I selected FULL UPDATE and then I checked in processing tab there is only one option enabled i.e. only data target. OK and then I loaded it. Now after getting the error where I can correct it. There is no PSA option in monitoring.
Other wise how I can change option in Processing tab of infopackage for PSA. But I know one point that when we load the data from one target to another the only one option available in processing tab is only data target. How can I change that option and how can I correct the error.
Thanks
RajeshHi,
i solved my question like the following.
Go to monitoring of the CUBE and select the option "read every thing as manually" -> then it shows another screen for correcting the records -> correct all the records and load the data again. ok
Thanks
Rajesh -
Error while loading from Flat file
Hi,
I'm trying to load master data from a flat file. After loading I get the following message even though I have used PSA as staging area. I see that data is present in the master data table (Text) without any errors though. Kindly help.
Error when updating Idocs in Business Information Warehouse
Diagnosis
Errors have been reported in Business Information Warehouse during IDoc update:
EDI: Partner profile not available
System response
There are IDocs with incorrect status.
Procedure
Check the IDocs in Business Information Warehouse . You can get here using the BW Monitor.
Removing errors:
How you remove the errors depends on the error message you receive.Check your flat file format and field separator. Is it .txt or .csv file?
Go to "Source systems" in "Modeling" chose your source system for flat files and perform check.
Maybe problem is with your source system...
This might also be due to logical names of the systems not being maintained. Also has anyone doen a flat file upload before this on the system and what is the version ? -
Data flow tasks faills while loading from database to excel
Hello,
I am getting error while loading from oledb source to excel and the error as shown below.
Error: 0xC0202009 at DFT - Company EX, OLE DB Destination [198]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
Error: 0xC0209029 at DFT - Company EX, OLE DB Destination [198]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Destination Input" (211)" failed because error code 0xC020907B occurred, and the error row
disposition on "input "OLE DB Destination Input" (211)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the
failure.
Error: 0xC0047022 at DFT - Company EX: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "OLE DB Destination" (198) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput
method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
Error: 0xC02020C4 at DFT - Company EX, OLE DB Source 1 [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
Error: 0xC0047021 at DFT - Company EX: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047038 at DFT - Company EX: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "OLE DB Source 1" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine
called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at DFT - Company EX: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
Any help would be appreciated ASAP.
Thanks,
Vinay sYou can use this code to import from SQL Server to Excel . . .
Sub ADOExcelSQLServer()
' Carl SQL Server Connection
' FOR THIS CODE TO WORK
' In VBE you need to go Tools References and check Microsoft Active X Data Objects 2.x library
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim rs As ADODB.Recordset
Set rs = New ADODB.Recordset
Server_Name = "EXCEL-PC\EXCELDEVELOPER" ' Enter your server name here
Database_Name = "AdventureWorksLT2012" ' Enter your database name here
User_ID = "" ' enter your user ID here
Password = "" ' Enter your password here
SQLStr = "SELECT * FROM [SalesLT].[Customer]" ' Enter your SQL here
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & _
";Uid=" & User_ID & ";Pwd=" & Password & ";"
rs.Open SQLStr, Cn, adOpenStatic
' Dump to spreadsheet
With Worksheets("sheet1").Range("a1:z500") ' Enter your sheet name and range here
.ClearContents
.CopyFromRecordset rs
End With
' Tidy up
rs.Close
Set rs = Nothing
Cn.Close
Set Cn = Nothing
End Sub
Also, check this out . . .
Sub ADOExcelSQLServer()
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim rs As ADODB.Recordset
Set rs = New ADODB.Recordset
Server_Name = "LAPTOP\SQL_EXPRESS" ' Enter your server name here
Database_Name = "Northwind" ' Enter your database name here
User_ID = "" ' enter your user ID here
Password = "" ' Enter your password here
SQLStr = "SELECT * FROM Orders" ' Enter your SQL here
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & _
";Uid=" & User_ID & ";Pwd=" & Password & ";"
rs.Open SQLStr, Cn, adOpenStatic
With Worksheets("Sheet1").Range("A2:Z500")
.ClearContents
.CopyFromRecordset rs
End With
rs.Close
Set rs = Nothing
Cn.Close
Set Cn = Nothing
End Sub
Finally, if you want to incorporate a Where clause . . .
Sub ImportFromSQLServer()
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim RS As ADODB.Recordset
Set RS = New ADODB.Recordset
Server_Name = "Excel-PC\SQLEXPRESS"
Database_Name = "Northwind"
'User_ID = "******"
'Password = "****"
SQLStr = "select * from dbo.TBL where EMPID = '2'" 'and PostingDate = '2006-06-08'"
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & ";"
'& ";Uid=" & User_ID & ";Pwd=" & Password & ";"
RS.Open SQLStr, Cn, adOpenStatic
With Worksheets("Sheet1").Range("A1")
.ClearContents
.CopyFromRecordset RS
End With
RS.Close
Set RS = Nothing
Cn.Close
Set Cn = Nothing
End Sub
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it. -
Hi All,
I am getting error while loading POS Data i.e 0RT_PA_TRAN_CONTROL..
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Error is: Update mode When Others is not supported by the extraction API
Long Text:
Update mode When Others is not supported by the extraction API
Message no. R3011
Diagnosis
The application program for the extraction of the data was called using
update mode When Others. However, this is not supported by the InfoSource.
System Response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or send a problem message of your own.
And also Please can anybody tell me what is the Update Mode i have to use in BI7 if our Data Source being loaded in other target with Delta Upload..?
Your help will be appreciated..
Regards,
Kiran TelkarHi,
Caller 09 is basically Memory related error. Ask your BASIS to increase the size.
Also check in the error log, the user ID u r using should have the proper authorization. -
Error while loading master data.
I am facing error while loading master data in a infoobject.
The error comes when I run DTP fo rloading data from PSA to infoobject.
The error wordings are : "MCK_PRDT1 : Data record 1 ('Bleach '): Version 'Bleach ' is not valid"
Please help me in understanding this Version errror and suggest a solution for this.SAP metodology integration MDM & BW you can look at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0f1f135-0015-2b10-5e83-acca118e17aa
You can turn matching strategy in MDM Data manager for delete dublicate of records
and then use MDM Syndicator for export data to file and then load that file to BW
If you use OHD you cannot load from BW to MDM repository 10 records and unload only 5 because
in BW every record has unique key.
also you can use MDM ABAP or Java API for delete dublicate of records
Edited by: Kanstantsin Chernichenka on May 8, 2009 1:02 PM -
Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")
I activated all 0* objects in BTMP and checked that they are all activated, but I found errors when opening the BEx Web Analyzer
Error messages :
Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")
ERROR: Command type SWITCH_AXES of object not recognized
ERROR: Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
So I ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version D report to check and choose validate.
Error messages :
Template Include Item HEADER_TEMPLATE unresolved or empty. Close and reopen template.
Template Include Item FOOTER_TEMPLATE unresolved or empty. Close and reopen template.
Width of object item:GROUP_ITEM:GROUP_ITEM_1 is very small (1amp;1)
Query does not exist in the BI System (Object QU )
Cannot instantiate data provider
I also ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version A and got the following errors:
Command type SWITCH_AXES of object not recognized
Command type SWITCH_AXES of object not recognized
Command type SWITCH_AXES of object not recognized
Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
Parameter GENERAL_TEXT_ELEMENT of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command SWITCH_AXES cannot be located in parameter ACTION
Command SWITCH_AXES cannot be located in parameter ACTION
Command SWITCH_AXES cannot be located in parameter ACTION
Parameter GENERIC_TEXT_BINDING of object item:GROUP_ITEM:GROUP_ITEM_1 cannot be higher-level node of GENERAL_TEXT_ELEMENT
Item item:GROUP_ITEM:GROUP_ITEM_1 of type DROPDOWN_ITEM cannot be a parent node of DATA_PROVIDER_REF
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of VISIBLE
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_POSITION
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_VISIBLE
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_ONLY
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
What could be the problem?hi,
Please look into this note let me it helps...url=https://websmp202.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=917950&_NLANG=E]Note 917950 - SAP NetWeaver 2004s: Setting Up BEx Web[/url]
check this link as well for [<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ca6de811-0c01-0010-43b2-c64584eef943">Bex Web Configuration</a>
wht is the SP Level?
Nagesh Ganisetti. -
Error while loading document when user executes IW32
we have brand new laptops and desktops installed SAP GUI 6.40 patch level 27 and microsoft office 2003.when the user tries to execute IW32 and click on the long text button.when we try to change the editor it is giving ERROR WHILE LOADING DOCUMENT
ERROR WHILE LOADING DOCUMENT
message no .sofficeintegration142
DIAGNOSIS
An internal error occured in the SAP Document Container Control while loading a document
PROCEDURE
If the error recurs,enter a problem message.There are notes relating to how to create the log file using the report SAPROFFICEINTEGRATIONTRACE1Hi Rajanarenderreddy,
Were you able to resolve your problem?
If so how? We have a customer that is experiencing the same problem.
Thank you for your feedback.
Br,
Tom. -
Language error while loading master data source for text
Hi,
We are getting the following error while loading the data in 0DISTR_CHAN_TEXT data source.
"Error during multibyte alignment for language D (position 2)".
Can we filter the data on the Language ( ='EN'). At the data source level LANGU field is marked for selection but still it is not available as filter at info package level.
Thanks
VVHey Vishal,
If the field is marked for Selection at data source level, then it must be available for selection in infopackage.
Try checking in RSA3 and see if it is available for selection over there. Let us know what was the output in R/3.
Regards,
Anjum. -
Error While loading a image from database
Purpose
Error While loading the Image from the database
ORA-06502: PL/SQL : numeric or value error:Character string buffer too small
ORA-06512: at "Sys.HTP" ,line 1480
Requirement:
I am developing the web pages using PSP(Pl/sql Serverpages) . I have a requirement to show a image in the webpage. I got the following procedures from the oracle website.
I have created the following table to store the images
create table DEMO
ID INTEGER not null,
THEBLOB BLOB
And I also uploaded the Images. Now I am try to get a image from the table using the following procedure .But I am getting the error message line 25( htp.prn( utl_raw.cast_to_varchar2( l_raw ) );) .at it throws the following error messages
ORA-06502: PL/SQL : numeric or value error:Character string buffer too small
ORA-06512: at "Sys.HTP" ,line 1480
Procedure that I used to get the image
create or replace package body image_get
as
procedure gif( p_id in demo.id%type )
is
l_lob blob;
l_amt number default 30;
l_off number default 1;
l_raw raw(4096);
begin
select theBlob into l_lob
from demo
where id = p_id;
-- make sure to change this for your type!
owa_util.mime_header( 'image/gif' );
begin
loop
dbms_lob.read( l_lob, l_amt, l_off, l_raw );
-- it is vital to use htp.PRN to avoid
-- spurious line feeds getting added to your
-- document
htp.prn( utl_raw.cast_to_varchar2( l_raw ) );
l_off := l_off+l_amt;
l_amt := 4096;
end loop;
exception
when no_data_found then
NULL;
end;
end;
end;
What I have to do to correct this problem. This demo procedure and table that I am downloaded from oracle. Some where I made a mistake. any help??
Thanks,
NatsHi Satish,
I have set the raw value as 3600 but still its gives the same error only. When I debug the procedure its throwing the error stack in
SYS.htp.prn procedure of the following line of code
if (rows_in < pack_after) then
while ((len - loc) >= HTBUF_LEN)
loop
rows_in := rows_in + 1;
htbuf(rows_in) := substr(cbuf, loc + 1, HTBUF_LEN);
loc := loc + HTBUF_LEN;
end loop;
if (loc < len)
then
rows_in := rows_in + 1;
htbuf(rows_in) := substr(cbuf, loc + 1);
end if;
return;
end if;
Its a system procedure. I don't no how to proceed .. I am really stucked on this....is their any other method to take picture from the database and displayed in the web page.....???? any idea..../suggesstion??
Thanks for your help!!!. -
Getting error While loading data from ERP integrator to HFM
Hello,
We are getting the following error while loading the data from ERPI to HFM.
2013-12-31 22:44:54,133 INFO [AIF]: ERPI Process Start, Process ID: 300
2013-12-31 22:44:54,137 INFO [AIF]: ERPI Logging Level: DEBUG (5)
2013-12-31 22:44:54,139 INFO [AIF]: ERPI Log File: C:\Windows\TEMP\/aif_501_300.log
2013-12-31 22:44:54,141 INFO [AIF]: Jython Version: 2.5.1 (Release_2_5_1:6813, Sep 26 2009, 13:47:54)
[Java HotSpot(TM) 64-Bit Server VM (Oracle Corporation)]
2013-12-31 22:44:54,143 INFO [AIF]: Java Platform: java1.7.0_25
2013-12-31 22:44:56,821 INFO [AIF]: COMM Process Periods - Insert Periods - START
2013-12-31 22:44:56,828 DEBUG [AIF]:
SELECT l.SOURCE_LEDGER_ID
,l.SOURCE_LEDGER_NAME
,l.SOURCE_COA_ID
,l.CALENDAR_ID
,'0' SETID
,l.PERIOD_TYPE
,NULL LEDGER_TABLE_NAME
FROM AIF_BALANCE_RULES br
,AIF_COA_LEDGERS l
WHERE br.RULE_ID = 27
AND l.SOURCE_SYSTEM_ID = br.SOURCE_SYSTEM_ID
AND l.SOURCE_LEDGER_ID = br.SOURCE_LEDGER_ID
2013-12-31 22:44:56,834 DEBUG [AIF]:
INSERT INTO AIF_PROCESS_PERIODS (
PROCESS_ID
,PERIODKEY
,PERIOD_ID
,ADJUSTMENT_PERIOD_FLAG
,GL_PERIOD_YEAR
,GL_PERIOD_NUM
,GL_PERIOD_NAME
,GL_PERIOD_CODE
,GL_EFFECTIVE_PERIOD_NUM
,YEARTARGET
,PERIODTARGET
,IMP_ENTITY_TYPE
,IMP_ENTITY_ID
,IMP_ENTITY_NAME
,TRANS_ENTITY_TYPE
,TRANS_ENTITY_ID
,TRANS_ENTITY_NAME
,PRIOR_PERIOD_FLAG
,SOURCE_LEDGER_ID
SELECT DISTINCT brl.LOADID PROCESS_ID
,pp.PERIODKEY PERIODKEY
,prd.PERIOD_ID
,COALESCE(prd.ADJUSTMENT_PERIOD_FLAG, 'N') ADJUSTMENT_PERIOD_FLAG
,COALESCE(prd.YEAR,0) GL_PERIOD_YEAR
,COALESCE(prd.PERIOD_NUM,0) GL_PERIOD_NUM
,prd.PERIOD_NAME GL_PERIOD_NAME
,COALESCE(prd.PERIOD_CODE, CAST(COALESCE(prd.PERIOD_NUM,0) AS VARCHAR(38))) GL_PERIOD_CODE
,(COALESCE(prd.YEAR,0) * 10000 + COALESCE(prd.PERIOD_NUM,0)) GL_EFFECTIVE_PERIOD_NUM
,COALESCE(ppa.YEARTARGET, pp.YEARTARGET) YEARTARGET
,COALESCE(ppa.PERIODTARGET, pp.PERIODTARGET) PERIODTARGET
,'PROCESS_BAL_IMP' IMP_ENTITY_TYPE
,(COALESCE(prd.YEAR,0) * 10000 + COALESCE(prd.PERIOD_NUM,0)) IMP_ENTITY_ID
,prd.PERIOD_NAME IMP_ENTITY_NAME
,'PROCESS_BAL_TRANS' TRANS_ENTITY_TYPE
,(COALESCE(prd.YEAR,0) * 10000 + COALESCE(prd.PERIOD_NUM,0)) TRANS_ENTITY_ID
,pp.PERIODDESC TRANS_ENTITY_NAME
,'N' PRIOR_PERIOD_FLAG
,1 SOURCE_LEDGER_ID
FROM (
AIF_BAL_RULE_LOADS brl
INNER JOIN TPOVCATEGORY pc
ON pc.CATKEY = brl.CATKEY
INNER JOIN TPOVPERIOD_FLAT_V pp
ON pp.PERIODFREQ = pc.CATFREQ
AND pp.PERIODKEY >= brl.START_PERIODKEY
AND pp.PERIODKEY <= brl.END_PERIODKEY
LEFT OUTER JOIN TPOVPERIODADAPTOR_FLAT_V ppa
ON ppa.PERIODKEY = pp.PERIODKEY
AND ppa.PERIODFREQ = pp.PERIODFREQ
AND ppa.INTSYSTEMKEY = 'FMTEST2'
INNER JOIN AIF_GL_PERIODS_STG prd
ON prd.SOURCE_SYSTEM_ID = 3
AND prd.CALENDAR_ID IN ('10000')
AND prd.SETID = '0'
AND prd.PERIOD_TYPE = 'Month'
AND prd.ADJUSTMENT_PERIOD_FLAG = 'N'
AND prd.START_DATE > pp.PRIORPERIODKEY
AND prd.START_DATE <= pp.PERIODKEY
WHERE brl.LOADID = 300
ORDER BY pp.PERIODKEY
,GL_EFFECTIVE_PERIOD_NUM
2013-12-31 22:44:56,915 INFO [AIF]: COMM Process Periods - Insert Periods - END
2013-12-31 22:44:56,945 INFO [AIF]: COMM Process Periods - Insert Process Details - START
2013-12-31 22:44:56,952 DEBUG [AIF]:
INSERT INTO AIF_PROCESS_DETAILS (
PROCESS_ID
,ENTITY_TYPE
,ENTITY_ID
,ENTITY_NAME
,ENTITY_NAME_ORDER
,TARGET_TABLE_NAME
,EXECUTION_START_TIME
,EXECUTION_END_TIME
,RECORDS_PROCESSED
,STATUS
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
SELECT PROCESS_ID
,ENTITY_TYPE
,ENTITY_ID
,ENTITY_NAME
,ENTITY_NAME_ORDER
,'AIF_EBS_GL_BALANCES_STG' TARGET_TABLE_NAME
,CURRENT_TIMESTAMP EXECUTION_START_TIME
,NULL EXECUTION_END_TIME
,0 RECORDS_PROCESSED
,'PENDING' STATUS
,'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' LAST_UPDATED_BY
,CURRENT_TIMESTAMP LAST_UPDATE_DATE
FROM (
SELECT DISTINCT PROCESS_ID
,IMP_ENTITY_TYPE ENTITY_TYPE
,IMP_ENTITY_ID ENTITY_ID
,IMP_ENTITY_NAME ENTITY_NAME
,(COALESCE(SOURCE_LEDGER_ID,0) * 100000000 + GL_EFFECTIVE_PERIOD_NUM) ENTITY_NAME_ORDER
FROM AIF_PROCESS_PERIODS
WHERE PROCESS_ID = 300
) q
ORDER BY ENTITY_NAME_ORDER
2013-12-31 22:44:56,963 DEBUG [AIF]:
INSERT INTO AIF_PROCESS_DETAILS (
PROCESS_ID
,ENTITY_TYPE
,ENTITY_ID
,ENTITY_NAME
,ENTITY_NAME_ORDER
,TARGET_TABLE_NAME
,EXECUTION_START_TIME
,EXECUTION_END_TIME
,RECORDS_PROCESSED
,STATUS
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
SELECT PROCESS_ID
,ENTITY_TYPE
,ENTITY_ID
,ENTITY_NAME
,ENTITY_NAME_ORDER
,'TDATASEG' TARGET_TABLE_NAME
,CURRENT_TIMESTAMP EXECUTION_START_TIME
,NULL EXECUTION_END_TIME
,0 RECORDS_PROCESSED
,'PENDING' STATUS
,'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' LAST_UPDATED_BY
,CURRENT_TIMESTAMP LAST_UPDATE_DATE
FROM (
SELECT PROCESS_ID
,TRANS_ENTITY_TYPE ENTITY_TYPE
,MIN(TRANS_ENTITY_ID) ENTITY_ID
,TRANS_ENTITY_NAME ENTITY_NAME
,MIN(COALESCE(SOURCE_LEDGER_ID,0) * 100000000 + GL_EFFECTIVE_PERIOD_NUM) ENTITY_NAME_ORDER
FROM AIF_PROCESS_PERIODS
WHERE PROCESS_ID = 300
AND PRIOR_PERIOD_FLAG = 'N'
GROUP BY PROCESS_ID
,TRANS_ENTITY_TYPE
,TRANS_ENTITY_NAME
) q
ORDER BY ENTITY_NAME_ORDER
2013-12-31 22:44:56,970 INFO [AIF]: COMM Process Periods - Insert Process Details - END
2013-12-31 22:44:57,407 DEBUG [AIF]: EBS/FS GL Balances Print Variables - Printing Variables - START
2013-12-31 22:44:57,408 DEBUG [AIF]:
p_process_id: 300
p_sql_db_type: ORACLE
p_partitionkey: 12
p_rule_id: 27
p_source_system_id: 3
p_application_id: 26
p_target_application_type: HFM
p_is_multi_currency: true
p_data_load_method: CLASSIC_VIA_EPMI
p_bal_balance_method_code: STANDARD
p_bal_ledger_group_code: SINGLE
p_bal_amount_type: MONETARY
p_prd_entity_name: JAN-13
p_prd_period_id: 135
p_prd_gl_period_name: JAN-13
p_prd_source_ledger_id: 1
p_prd_source_coa_id: 101
p_source_ledger_id: 1
p_source_coa_id: 101
p_bal_actual_flag: A
p_bal_seg_column_name: SEGMENT1
p_max_ccid_loaded_to_stg: 148137
2013-12-31 22:44:57,408 DEBUG [AIF]: EBS/FS GL Balances Print Variables - Printing Variables - END
2013-12-31 22:44:57,806 INFO [AIF]: LKM EBS/FS Extract Type - Load Audit AND Full Refresh - START
2013-12-31 22:44:57,817 DEBUG [AIF]:
SELECT p.PROCESS_ID
,br.RULE_NAME
,l.SOURCE_LEDGER_NAME
FROM AIF_GL_LOAD_AUDIT aud
,AIF_PROCESSES p
,AIF_BALANCE_RULES br
,AIF_COA_LEDGERS l
WHERE aud.SOURCE_SYSTEM_ID = 3
AND aud.SOURCE_LEDGER_ID = 1
AND aud.GL_PERIOD_ID = 135
AND aud.BALANCE_TYPE = 'A'
AND p.PROCESS_ID = aud.LAST_LOADID
AND p.STATUS = 'RUNNING'
AND p.PROCESS_ID <> 300
AND br.RULE_ID = p.RULE_ID
AND l.SOURCE_SYSTEM_ID = aud.SOURCE_SYSTEM_ID
AND l.SOURCE_LEDGER_ID = aud.SOURCE_LEDGER_ID
2013-12-31 22:44:57,826 DEBUG [AIF]:
SELECT 'Y' VALID_FLAG
FROM GL_PERIOD_STATUSES
WHERE APPLICATION_ID = 101
AND SET_OF_BOOKS_ID = 1
AND PERIOD_NAME = 'JAN-13'
AND CLOSING_STATUS IN ( 'O','C','P' )
2013-12-31 22:44:57,847 DEBUG [AIF]:
SELECT 'Y' EXISTS_FLAG
FROM GL_TRACK_DELTA_BALANCES
WHERE SET_OF_BOOKS_ID = 1
AND PROGRAM_CODE = 'FEM'
AND PERIOD_NAME = 'JAN-13'
AND ACTUAL_FLAG = 'A'
AND EXTRACT_LEVEL_CODE = 'DTL'
AND CURRENCY_TYPE_CODE = 'B'
AND ENABLED_FLAG = 'Y'
2013-12-31 22:44:57,883 DEBUG [AIF]:
SELECT MAX(DELTA_RUN_ID) MAX_DELTA_RUN_ID
FROM GL_BALANCES_DELTA
WHERE SET_OF_BOOKS_ID = 1
AND PERIOD_NAME = 'JAN-13'
AND ACTUAL_FLAG = 'A'
2013-12-31 22:44:57,898 DEBUG [AIF]:
SELECT brl.EXECUTION_MODE
,( SELECT CASE COUNT(aud.DELTA_RUN_ID) WHEN 0 THEN 'N' ELSE 'Y' END
FROM AIF_GL_LOAD_AUDIT aud
WHERE aud.SOURCE_SYSTEM_ID = 3
AND aud.SOURCE_LEDGER_ID = 1
AND aud.GL_PERIOD_ID = 135
AND aud.BALANCE_TYPE = 'A'
AND aud.LAST_LOADID <> brl.LOADID
AND COALESCE( aud.STATUS, 'SUCCESS' ) = 'SUCCESS'
) GL_LOAD_AUDIT_SUCCESS_FLAG
,( SELECT CASE COUNT(aud.DELTA_RUN_ID) WHEN 0 THEN 'N' ELSE 'Y' END
FROM AIF_GL_LOAD_AUDIT aud
WHERE aud.SOURCE_SYSTEM_ID = 3
AND aud.SOURCE_LEDGER_ID = 1
AND aud.GL_PERIOD_ID = 135
AND aud.BALANCE_TYPE = 'A'
AND aud.LAST_LOADID <> brl.LOADID
AND aud.STATUS = 'RUNNING'
) GL_LOAD_AUDIT_RUNNING_FLAG
FROM AIF_BAL_RULE_LOADS brl
WHERE brl.LOADID = 300
2013-12-31 22:44:57,904 DEBUG [AIF]:
INSERT INTO AIF_GL_LOAD_AUDIT ( LAST_LOADID
,DELTA_RUN_ID
,SOURCE_SYSTEM_ID
,SOURCE_LEDGER_ID
,GL_PERIOD_ID
,BALANCE_TYPE
,GL_EXTRACT_TYPE
,STATUS
) VALUES ( 300
,0
,3
,1
,135
,'A'
,'FULLREFRESH'
,'RUNNING'
2013-12-31 22:44:57,907 DEBUG [AIF]:
DELETE FROM AIF_EBS_GL_BALANCES_STG
WHERE SOURCE_SYSTEM_ID = 3
AND SOURCE_COA_ID = 101
AND SOURCE_LEDGER_ID = 1
AND ACTUAL_FLAG = 'A'
AND PERIOD_NAME = 'JAN-13'
2013-12-31 22:44:59,283 INFO [AIF]: LKM EBS/FS Extract Type - Load Audit AND Full Refresh - END
2013-12-31 22:45:06,507 INFO [AIF]: COMM End Process Detail - Update Process Detail - START
2013-12-31 22:45:06,514 DEBUG [AIF]:
UPDATE AIF_PROCESS_DETAILS
SET STATUS = 'SUCCESS'
,RECORDS_PROCESSED = CASE
WHEN RECORDS_PROCESSED IS NULL THEN 0
ELSE RECORDS_PROCESSED
END + 57408
,EXECUTION_END_TIME = CURRENT_TIMESTAMP
,LAST_UPDATED_BY = CASE
WHEN ('native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' IS NULL) THEN LAST_UPDATED_BY
ELSE 'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER'
END
,LAST_UPDATE_DATE = CURRENT_TIMESTAMP
WHERE PROCESS_ID = 300
AND ENTITY_TYPE = 'PROCESS_BAL_IMP'
AND ENTITY_NAME = 'JAN-13'
2013-12-31 22:45:06,519 INFO [AIF]: COMM End Process Detail - Update Process Detail - END
2013-12-31 22:45:07,106 INFO [AIF]: EBS/FS Load Data - Load TDATASEG_T - START
2013-12-31 22:45:07,112 INFO [AIF]:
Import Data from Source for Period 'January 2013'
2013-12-31 22:45:07,115 DEBUG [AIF]:
SELECT brl.PARTITIONKEY
,brl.CATKEY
,brl.PLAN_TYPE
,CASE brl.PLAN_TYPE
WHEN 'PLAN1' THEN 1
WHEN 'PLAN2' THEN 2
WHEN 'PLAN3' THEN 3
WHEN 'PLAN4' THEN 4
WHEN 'PLAN5' THEN 5
ELSE 0
END PLAN_NUMBER
,brl.EXECUTION_MODE
,br.AMOUNT_TYPE
,br.BALANCE_SELECTION
,br.CURRENCY_CODE
,br.INCL_ZERO_BALANCE_FLAG
,br.BAL_SEG_VALUE_OPTION_CODE
,COALESCE(br.BALANCE_AMOUNT_BS, 'YTD') BALANCE_AMOUNT_BS
,COALESCE(br.BALANCE_AMOUNT_IS, 'PERIODIC') BALANCE_AMOUNT_IS
FROM AIF_BAL_RULE_LOADS brl
,AIF_TARGET_APPLICATIONS app
,AIF_BALANCE_RULES br
WHERE brl.LOADID = 300
AND app.APPLICATION_ID = brl.APPLICATION_ID
AND br.RULE_ID = brl.RULE_ID
2013-12-31 22:45:07,120 DEBUG [AIF]:
SELECT PERIODKEY
FROM TPOVPERIOD
WHERE PERIODDESC = 'January 2013'
2013-12-31 22:45:07,122 INFO [AIF]:
Import Data from Source for Ledger 'JWR Books'
2013-12-31 22:45:07,125 DEBUG [AIF]:
SELECT COA_SEGMENT_NAME
,ACCOUNT_TYPE_FLAG
,BALANCE_TYPE_FLAG
FROM AIF_COA_SEGMENTS
WHERE SOURCE_SYSTEM_ID = 3
AND SOURCE_COA_ID = '101'
AND (
ACCOUNT_TYPE_FLAG = 'Y'
OR BALANCE_TYPE_FLAG = 'Y'
2013-12-31 22:45:07,127 DEBUG [AIF]:
SELECT adim.BALANCE_COLUMN_NAME DIMNAME
,adim.DIMENSION_ID
,dim.TARGET_DIMENSION_CLASS_NAME
,(SELECT COA_SEGMENT_NAME
FROM AIF_COA_SEGMENTS cs
WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID1
) COA_SEGMENT_NAME1
,(SELECT COA_SEGMENT_NAME
FROM AIF_COA_SEGMENTS cs
WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID2
) COA_SEGMENT_NAME2
,(SELECT COA_SEGMENT_NAME
FROM AIF_COA_SEGMENTS cs
WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID3
) COA_SEGMENT_NAME3
,(SELECT COA_SEGMENT_NAME
FROM AIF_COA_SEGMENTS cs
WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID4
) COA_SEGMENT_NAME4
,(SELECT COA_SEGMENT_NAME
FROM AIF_COA_SEGMENTS cs
WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID5
) COA_SEGMENT_NAME5
,(SELECT CASE mdd.ORPHAN_OPTION_CODE
WHEN 'CHILD' THEN 'N'
WHEN 'ROOT' THEN 'N'
ELSE 'Y'
END DIMENSION_FILTER_FLAG
FROM AIF_MAP_DIM_DETAILS_V mdd
,AIF_MAPPING_RULES mr
WHERE mr.PARTITIONKEY = tpp.PARTITIONKEY
AND mdd.RULE_ID = mr.RULE_ID
AND mdd.DIMENSION_ID = adim.DIMENSION_ID
) DIMENSION_FILTER_FLAG
,tiie.IMPCONCATCHAR
FROM TPOVPARTITION tpp
INNER JOIN AIF_TARGET_APPL_DIMENSIONS adim
ON adim.APPLICATION_ID = 26
INNER JOIN AIF_DIMENSIONS dim
ON dim.DIMENSION_ID = adim.DIMENSION_ID
LEFT OUTER JOIN TBHVIMPITEMERPI tiie
ON tiie.IMPGROUPKEY = tpp.PARTIMPGROUP
AND tiie.IMPFLDFIELDNAME = adim.BALANCE_COLUMN_NAME
AND tiie.IMPMAPTYPE = 'ERP'
WHERE tpp.PARTITIONKEY = 12
AND adim.BALANCE_COLUMN_NAME IS NOT NULL
ORDER BY adim.BALANCE_COLUMN_NAME
2013-12-31 22:45:07,154 DEBUG [AIF]:
INSERT INTO TDATASEG_T (
LOADID
,PARTITIONKEY
,CATKEY
,RULE_ID
,PERIODKEY
,VALID_FLAG
,CHANGESIGN
,CODE_COMBINATION_ID
,SOURCE_LEDGER_ID
,GL_PERIOD_YEAR
,GL_PERIOD_NUM
,YEAR
,PERIOD
,ATTR1
,ATTR2
,ATTR3
,ATTR4
,ATTR5
,ATTR6
,ATTR7
,ATTR8
,ATTR9
,ATTR10
,ATTR11
,ATTR12
,ATTR13
,ATTR14
,ACCOUNT
,ACCOUNTX
,ENTITY
,ENTITYX
,ICP
,ICPX
,UD1
,UD1X
,UD2
,UD2X
,UD3
,UD3X
,UD4
,UD4X
,DATAVIEW
,DATAKEY
,STAT_BALANCE_FLAG
,CURKEY
,AMOUNT_PTD
,AMOUNT_YTD
,AMOUNT
,AMOUNTX
SELECT pprd.PROCESS_ID LOADID
,12 PARTITIONKEY
,4 CATKEY
,27 RULE_ID
,pprd.PERIODKEY
,'Y' VALID_FLAG
,0 CHANGESIGN
,ccid.CODE_COMBINATION_ID
,bal.SOURCE_LEDGER_ID
,pprd.GL_PERIOD_YEAR
,pprd.GL_PERIOD_NUM
,pprd.YEARTARGET YEAR
,pprd.PERIODTARGET PERIOD
,pprd.PROCESS_ID ATTR1
,bal.SOURCE_SYSTEM_ID ATTR2
,bal.SOURCE_LEDGER_ID ATTR3
,pprd.GL_PERIOD_YEAR ATTR4
,pprd.GL_PERIOD_NAME ATTR5
,bal.ACTUAL_FLAG ATTR6
,bal.BUDGET_VERSION_ID ATTR7
,bal.ENCUMBRANCE_TYPE_ID ATTR8
,ccid.ACCOUNT_TYPE ATTR9
,NULL ATTR10
,NULL ATTR11
,NULL ATTR12
,NULL ATTR13
,NULL ATTR14
,ccid.SEGMENT4 ACCOUNT
,NULL ACCOUNTX
,ccid.SEGMENT1 ENTITY
,NULL ENTITYX
,NULL ICP
,NULL ICPX
,ccid.SEGMENT5 UD1
,NULL UD1X
,ccid.SEGMENT3 UD2
,NULL UD2X
,ccid.SEGMENT6 UD3
,NULL UD3X
,ccid.SEGMENT2 UD4
,NULL UD4X
,( CASE WHEN ccid.ACCOUNT_TYPE IN ('R','E','D','C') THEN 'Periodic' ELSE 'YTD' END ) DATAVIEW
,TDATASEG_DATAKEY_S.NEXTVAL
,'N' STAT_BALANCE_FLAG
,bal.CURRENCY_CODE CURKEY
,( CASE WHEN ccid.ACCOUNT_TYPE IN ('A','E','D') THEN 1 ELSE -1 END ) * ( bal.PERIOD_NET_DR - bal.PERIOD_NET_CR ) AMOUNT_PTD
,( CASE WHEN ccid.ACCOUNT_TYPE IN ('A','E','D') THEN 1 ELSE -1 END ) * ( bal.BEGIN_BALANCE_DR - bal.BEGIN_BALANCE_CR + bal.PERIOD_NET_DR - bal.PERIOD_NET_CR ) AMOUNT_YTD
,( CASE WHEN ccid.ACCOUNT_TYPE IN ('A','E','D') THEN 1 ELSE -1 END ) *
( CASE
WHEN ccid.ACCOUNT_TYPE IN ('R','E','D','C') THEN ( bal.PERIOD_NET_DR - bal.PERIOD_NET_CR )
ELSE ( bal.BEGIN_BALANCE_DR - bal.BEGIN_BALANCE_CR + bal.PERIOD_NET_DR - bal.PERIOD_NET_CR )
END
AMOUNT
,( CASE WHEN ccid.ACCOUNT_TYPE IN ('A','E','D') THEN 1 ELSE -1 END ) *
( CASE
WHEN ccid.ACCOUNT_TYPE IN ('R','E','D','C') THEN ( bal.PERIOD_NET_DR - bal.PERIOD_NET_CR )
ELSE ( bal.BEGIN_BALANCE_DR - bal.BEGIN_BALANCE_CR + bal.PERIOD_NET_DR - bal.PERIOD_NET_CR )
END
AMOUNTX
FROM AIF_EBS_GL_BALANCES_STG_V bal
,AIF_EBS_GL_CCID_STG ccid
,AIF_PROCESS_PERIODS pprd
WHERE bal.SOURCE_SYSTEM_ID = 3
AND bal.SOURCE_LEDGER_ID = 1
AND bal.ACTUAL_FLAG = 'A'
AND ccid.SOURCE_SYSTEM_ID = bal.SOURCE_SYSTEM_ID
AND ccid.SOURCE_COA_ID = bal.SOURCE_COA_ID
AND ccid.CODE_COMBINATION_ID = bal.CODE_COMBINATION_ID
AND pprd.PROCESS_ID = 300
AND pprd.PERIODKEY = '2013-01-01'
AND pprd.SOURCE_LEDGER_ID = bal.SOURCE_LEDGER_ID
AND pprd.GL_PERIOD_NAME = bal.PERIOD_NAME
AND (
bal.BEGIN_BALANCE_DR <> 0
OR bal.BEGIN_BALANCE_CR <> 0
OR bal.PERIOD_NET_DR <> 0
OR bal.PERIOD_NET_CR <> 0
AND bal.CURRENCY_CODE <> 'STAT'
AND bal.TRANSLATED_FLAG IS NULL
2013-12-31 22:45:09,269 INFO [AIF]: Monetary Data Rows Imported from Source: 12590
2013-12-31 22:45:09,293 DEBUG [AIF]:
INSERT INTO AIF_APPL_LOAD_AUDIT (
LOADID
,TARGET_APPLICATION_TYPE
,TARGET_APPLICATION_NAME
,PLAN_TYPE
,SOURCE_LEDGER_ID
,EPM_YEAR
,EPM_PERIOD
,SNAPSHOT_FLAG
,PARTITIONKEY
,CATKEY
,RULE_ID
,PERIODKEY
,EXPORT_TO_TARGET_FLAG
SELECT DISTINCT PROCESS_ID LOADID
,'HFM' TARGET_APPLICATION_TYPE
,'FMTEST2' TARGET_APPLICATION_NAME
,NULL PLAN_TYPE
,SOURCE_LEDGER_ID
,YEARTARGET EPM_YEAR
,PERIODTARGET EPM_PERIOD
,'Y' SNAPSHOT_FLAG
,12 PARTITIONKEY
,4 CATKEY
,27 RULE_ID
,PERIODKEY
,'N' EXPORT_TO_TARGET_FLAG
FROM AIF_PROCESS_PERIODS
WHERE PROCESS_ID = 300
AND PERIODKEY = '2013-01-01'
AND SOURCE_LEDGER_ID = 1
2013-12-31 22:45:09,297 DEBUG [AIF]:
INSERT INTO AIF_APPL_LOAD_PRD_AUDIT (
LOADID
,SOURCE_LEDGER_ID
,GL_PERIOD_ID
,DELTA_RUN_ID
,PARTITIONKEY
,CATKEY
,RULE_ID
,PERIODKEY
SELECT DISTINCT pprd.PROCESS_ID LOADID
,pprd.SOURCE_LEDGER_ID
,pprd.PERIOD_ID GL_PERIOD_ID
,(SELECT MAX(gl.DELTA_RUN_ID)
FROM AIF_GL_LOAD_AUDIT gl
WHERE gl.SOURCE_SYSTEM_ID = 3
AND gl.SOURCE_LEDGER_ID = pprd.SOURCE_LEDGER_ID
AND gl.BALANCE_TYPE = 'A'
AND gl.GL_PERIOD_ID = pprd.PERIOD_ID
) DELTA_RUN_ID
,12 PARTITIONKEY
,4 CATKEY
,27 RULE_ID
,pprd.PERIODKEY
FROM AIF_PROCESS_PERIODS pprd
WHERE pprd.PROCESS_ID = 300
AND pprd.PERIODKEY = '2013-01-01'
AND pprd.SOURCE_LEDGER_ID = 1
2013-12-31 22:45:09,302 INFO [AIF]:
Total Data Rows Imported from Source: 12590
2013-12-31 22:45:09,305 INFO [AIF]: EBS/FS Load Data - Load TDATASEG_T - END
2013-12-31 22:45:09,381 INFO [AIF]: COMM Update Data - Init DataLoadUtil - START
2013-12-31 22:45:09,385 INFO [AIF]: COMM Update Data - Init DataLoadUtil - END
2013-12-31 22:45:09,485 INFO [AIF]: COMM Update Data - Update TDATASEG_T/TDATASEGW - START
2013-12-31 22:45:09,491 DEBUG [AIF]:
DELETE FROM TDATASEG_T
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND AMOUNT = 0
2013-12-31 22:45:09,559 WARN [AIF]:
Warning: Data rows with zero balances exist
2013-12-31 22:45:09,636 INFO [AIF]: Zero Balance Data Rows Deleted: 1879
2013-12-31 22:45:09,654 DEBUG [AIF]:
SELECT DIMNAME
,CASE WHEN RULE_ID IS NULL THEN 'N' ELSE 'Y' END RULE_MAP_FLAG
,SRCKEY
,TARGKEY
,WHERECLAUSETYPE
,WHERECLAUSEVALUE
,CHANGESIGN
,SEQUENCE
,DATAKEY
,MAPPING_TYPE
FROM (
SELECT DISTINCT tdm.DIMNAME
,tdm.RULE_ID
,NULL SRCKEY
,NULL TARGKEY
,tdm.WHERECLAUSETYPE
,tdm.WHERECLAUSEVALUE
,NULL CHANGESIGN
,1 SEQUENCE
,COALESCE(tdm.SYSTEM_GENERATED_FLAG,'N') SYSTEM_GENERATED_FLAG
,NULL DATAKEY
,CASE
WHEN tdm.WHERECLAUSETYPE IS NULL THEN 1
ELSE 3
END MAPPING_TYPE
FROM TDATAMAP_T tdm
WHERE tdm.LOADID = 300
AND tdm.PARTITIONKEY = 12
AND tdm.TDATAMAPTYPE = 'ERP'
AND (tdm.RULE_ID IS NULL OR tdm.RULE_ID = 27)
AND tdm.WHERECLAUSETYPE IS NULL
UNION ALL
SELECT tdm.DIMNAME
,tdm.RULE_ID
,tdm.SRCKEY
,tdm.TARGKEY
,tdm.WHERECLAUSETYPE
,tdm.WHERECLAUSEVALUE
,tdm.CHANGESIGN
,CASE tpp.PARTSEQMAP
WHEN 0 THEN CASE
WHEN (tdm.WHERECLAUSETYPE = 'MULTIDIM') THEN 2
WHEN (tdm.WHERECLAUSETYPE = 'BETWEEN') THEN 3
WHEN (tdm.WHERECLAUSETYPE = 'LIKE') THEN 4
ELSE 0
END
ELSE tdm.SEQUENCE
END SEQUENCE
,COALESCE(tdm.SYSTEM_GENERATED_FLAG,'N') SYSTEM_GENERATED_FLAG
,tdm.DATAKEY
,CASE
WHEN tdm.WHERECLAUSETYPE IS NULL THEN 1
ELSE 3
END MAPPING_TYPE
FROM TDATAMAP_T tdm
INNER JOIN TPOVPARTITION tpp
ON tpp.PARTITIONKEY = tdm.PARTITIONKEY
WHERE tdm.LOADID = 300
AND tdm.PARTITIONKEY = 12
AND tdm.TDATAMAPTYPE = 'ERP'
AND (tdm.RULE_ID IS NULL OR tdm.RULE_ID = 27)
AND tdm.WHERECLAUSETYPE IN ('MULTIDIM','BETWEEN','LIKE')
) q
ORDER BY DIMNAME
,RULE_ID
,SEQUENCE
,SYSTEM_GENERATED_FLAG
,SRCKEY
2013-12-31 22:45:09,672 INFO [AIF]:
Processing Mappings for Column 'ACCOUNT'
2013-12-31 22:45:09,677 DEBUG [AIF]:
UPDATE TDATASEG_T
SET ACCOUNTX = ACCOUNT
,ACCOUNTR = 121
,ACCOUNTF = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '*' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND ACCOUNTX IS NULL
AND (1=1)
2013-12-31 22:45:10,044 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:10,053 INFO [AIF]:
Processing Mappings for Column 'ENTITY'
2013-12-31 22:45:10,057 DEBUG [AIF]:
UPDATE TDATASEG_T
SET ENTITYX = ENTITY
,ENTITYR = 122
,ENTITYF = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '*' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND ENTITYX IS NULL
AND (1=1)
2013-12-31 22:45:10,426 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:10,435 DEBUG [AIF]:
UPDATE TDATASEG_T
SET ENTITYX = ENTITY
,ENTITYR = 132
,ENTITYF = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '*' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND ENTITYX IS NULL
AND (1=1)
2013-12-31 22:45:10,446 INFO [AIF]: Data Rows Updated by Location Mapping 'DEFAULT' (LIKE): 0
2013-12-31 22:45:10,448 INFO [AIF]:
Processing Mappings for Column 'ICP'
2013-12-31 22:45:10,452 DEBUG [AIF]:
UPDATE TDATASEG_T
SET ICPX = '[ICP None]'
,ICPR = 130
,ICPF = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '[ICP None]' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND ICPX IS NULL
AND (1=1)
2013-12-31 22:45:10,784 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:10,798 INFO [AIF]:
Processing Mappings for Column 'UD1'
2013-12-31 22:45:10,802 DEBUG [AIF]:
UPDATE TDATASEG_T
SET UD1X = '[None]'
,UD1R = 124
,UD1F = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '[None]' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND UD1X IS NULL
AND (1=1)
2013-12-31 22:45:11,134 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:11,156 INFO [AIF]:
Processing Mappings for Column 'UD2'
2013-12-31 22:45:11,160 DEBUG [AIF]:
UPDATE TDATASEG_T
SET UD2X = '[None]'
,UD2R = 123
,UD2F = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '[None]' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND UD2X IS NULL
AND (1=1)
2013-12-31 22:45:11,517 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:11,531 INFO [AIF]:
Processing Mappings for Column 'UD3'
2013-12-31 22:45:11,535 DEBUG [AIF]:
UPDATE TDATASEG_T
SET UD3X = '[None]'
,UD3R = 125
,UD3F = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '[None]' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND UD3X IS NULL
AND (1=1)
2013-12-31 22:45:11,870 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:11,883 INFO [AIF]:
Processing Mappings for Column 'UD4'
2013-12-31 22:45:11,887 DEBUG [AIF]:
UPDATE TDATASEG_T
SET UD4X = '[None]'
,UD4R = 128
,UD4F = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '[None]' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND UD4X IS NULL
AND (1=1)
2013-12-31 22:45:12,192 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:12,204 DEBUG [AIF]:
UPDATE TDATASEG_T
SET ATTR14 = DATAKEY
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
2013-12-31 22:45:12,739 DEBUG [AIF]:
UPDATE TDATASEG_T
SET VALID_FLAG = 'N'
WHERE 1=1
AND (
(1=0)
OR TDATASEG_T.ACCOUNTX IS NULL
OR TDATASEG_T.ENTITYX IS NULL
OR TDATASEG_T.ICPX IS NULL
OR TDATASEG_T.UD1X IS NULL
OR TDATASEG_T.UD2X IS NULL
OR TDATASEG_T.UD3X IS NULL
OR TDATASEG_T.UD4X IS NULL
AND LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND VALID_FLAG = 'Y'
2013-12-31 22:45:12,754 INFO [AIF]:
Total Data Rows available for Export to Target: 10711
2013-12-31 22:45:12,773 INFO [AIF]: COMM Update Data - Update TDATASEG_T/TDATASEGW - END
2013-12-31 22:45:12,808 INFO [AIF]: COMM End Process Detail - Update Process Detail - START
2013-12-31 22:45:12,823 DEBUG [AIF]:
UPDATE AIF_PROCESS_DETAILS
SET STATUS = 'SUCCESS'
,RECORDS_PROCESSED = CASE
WHEN RECORDS_PROCESSED IS NULL THEN 0
ELSE RECORDS_PROCESSED
END + 10711
,EXECUTION_END_TIME = CURRENT_TIMESTAMP
,LAST_UPDATED_BY = CASE
WHEN ('native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' IS NULL) THEN LAST_UPDATED_BY
ELSE 'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER'
END
,LAST_UPDATE_DATE = CURRENT_TIMESTAMP
WHERE PROCESS_ID = 300
AND ENTITY_TYPE = 'PROCESS_BAL_TRANS'
AND ENTITY_NAME = 'January 2013'
2013-12-31 22:45:12,829 INFO [AIF]: COMM End Process Detail - Update Process Detail - END
2013-12-31 22:45:12,987 INFO [AIF]: COMM Update YTD Amounts - Update YTD Amounts - START
2013-12-31 22:45:12,993 DEBUG [AIF]:
SELECT brl.PARTITIONKEY
,brl.CATKEY
,pprd.YEARTARGET
,pprd.PERIODTARGET
,pprd.SOURCE_LEDGER_ID
FROM AIF_BAL_RULE_LOADS brl
,AIF_PROCESS_PERIODS pprd
WHERE brl.LOADID = 300
AND pprd.PROCESS_ID = brl.LOADID
GROUP BY brl.PARTITIONKEY
,brl.CATKEY
,pprd.YEARTARGET
,pprd.PERIODTARGET
,pprd.SOURCE_LEDGER_ID
HAVING COUNT(*) > 1
2013-12-31 22:45:12,995 INFO [AIF]: COMM Update YTD Amounts - Update YTD Amounts - END
2013-12-31 22:45:13,052 INFO [AIF]: COMM Load TDATAMAPSEG/TDATASEG - Load TDATAMAPSEG/TDATASEG - START
2013-12-31 22:45:13,057 DEBUG [AIF]:
SELECT brl.PARTITIONKEY
,brl.CATKEY
,brl.EXECUTION_MODE
FROM AIF_BAL_RULE_LOADS brl
WHERE brl.LOADID = 300
2013-12-31 22:45:13,059 DEBUG [AIF]:
SELECT PERIODKEY
FROM AIF_APPL_LOAD_AUDIT
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND RULE_ID = 27
ORDER BY PERIODKEY
2013-12-31 22:45:13,061 INFO [AIF]:
Processing Data for PeriodKey '2013-01-01'
2013-12-31 22:45:13,065 DEBUG [AIF]:
DELETE FROM TDATAMAPSEG
WHERE PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND (
TDATAMAPTYPE = 'ERP'
OR (
TDATAMAPTYPE = 'MULTIDIM'
AND EXISTS (
SELECT 1
FROM TDATAMAPSEG parent
WHERE parent.PARTITIONKEY = TDATAMAPSEG.PARTITIONKEY
AND parent.DATAKEY = TDATAMAPSEG.TARGKEY
AND parent.CATKEY = TDATAMAPSEG.CATKEY
AND parent.PERIODKEY = TDATAMAPSEG.PERIODKEY
AND parent.TDATAMAPTYPE = 'ERP'
2013-12-31 22:45:13,074 INFO [AIF]: Number of Rows deleted from TDATAMAPSEG: 8
2013-12-31 22:45:13,077 DEBUG [AIF]:
INSERT INTO TDATAMAPSEG (
DATAKEY
,PARTITIONKEY
,CATKEY
,PERIODKEY
,DIMNAME
,SRCKEY
,SRCDESC
,TARGKEY
,WHERECLAUSETYPE
,WHERECLAUSEVALUE
,CHANGESIGN
,SEQUENCE
,VBSCRIPT
,TDATAMAPTYPE
,SYSTEM_GENERATED_FLAG
SELECT DATAKEY
,PARTITIONKEY
,4
,'2013-01-01'
,DIMNAME
,SRCKEY
,SRCDESC
,TARGKEY
,WHERECLAUSETYPE
,WHERECLAUSEVALUE
,CHANGESIGN
,SEQUENCE
,VBSCRIPT
,TDATAMAPTYPE
,SYSTEM_GENERATED_FLAG
FROM TDATAMAP_T
WHERE LOADID = 300
2013-12-31 22:45:13,081 INFO [AIF]: Number of Rows inserted into TDATAMAPSEG: 8
2013-12-31 22:45:13,083 DEBUG [AIF]:
DELETE FROM TDATASEG
WHERE LOADID < 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND RULE_ID = 27
AND PERIODKEY = '2013-01-01'
2013-12-31 22:45:15,659 INFO [AIF]: Number of Rows deleted from TDATASEG: 10711
2013-12-31 22:45:15,728 DEBUG [AIF]:
INSERT INTO TDATASEG (
DATAKEY
,PARTITIONKEY
,CATKEY
,PERIODKEY
,CURKEY
,DATAVIEW
,CALCACCTTYPE
,CHANGESIGN
,JOURNALID
,AMOUNT
,AMOUNTX
,AMOUNT_PTD
,AMOUNT_YTD
,DESC1
,DESC2
,ACCOUNT
,ACCOUNTX
,ACCOUNTR
,ACCOUNTF
,ENTITY
,ENTITYX
,ENTITYR
,ENTITYF
,ICP
,ICPX
,ICPR
,ICPF
,UD1
,UD1X
,UD1R
,UD1F
,UD2
,UD2X
,UD2R
,UD2F
,UD3
,UD3X
,UD3R
,UD3F
,UD4
,UD4X
,UD4R
,UD4F
,UD5
,UD5X
,UD5R
,UD5F
,UD6
,UD6X
,UD6R
,UD6F
,UD7
,UD7X
,UD7R
,UD7F
,UD8
,UD8X
,UD8R
,UD8F
,UD9
,UD9X
,UD9R
,UD9F
,UD10
,UD10X
,UD10R
,UD10F
,UD11
,UD11X
,UD11R
,UD11F
,UD12
,UD12X
,UD12R
,UD12F
,UD13
,UD13X
,UD13R
,UD13F
,UD14
,UD14X
,UD14R
,UD14F
,UD15
,UD15X
,UD15R
,UD15F
,UD16
,UD16X
,UD16R
,UD16F
,UD17
,UD17X
,UD17R
,UD17F
,UD18
,UD18X
,UD18R
,UD18F
,UD19
,UD19X
,UD19R
,UD19F
,UD20
,UD20X
,UD20R
,UD20F
,ATTR1
,ATTR2
,ATTR3
,ATTR4
,ATTR5
,ATTR6
,ATTR7
,ATTR8
,ATTR9
,ATTR10
,ATTR11
,ATTR12
,ATTR13
,ATTR14
,ARCHIVEID
,HASMEMOITEM
,STATICDATAKEY
,LOADID
,RULE_ID,
CODE_COMBINATION_ID
,STAT_BALANCE_FLAG
,VALID_FLAG
SELECT
DATAKEY
,PARTITIONKEY
,CATKEY
,PERIODKEY
,CURKEY
,DATAVIEW
,CALCACCTTYPE
,CHANGESIGN
,JOURNALID
,AMOUNT
,AMOUNTX
,AMOUNT_PTD
,AMOUNT_YTD
,DESC1
,DESC2
,ACCOUNT
,ACCOUNTX
,ACCOUNTR
,ACCOUNTF
,ENTITY
,ENTITYX
,ENTITYR
,ENTITYF
,ICP
,ICPX
,ICPR
,ICPF
,UD1
,UD1X
,UD1R
,UD1F
,UD2
,UD2X
,UD2R
,UD2F
,UD3
,UD3X
,UD3R
,UD3F
,UD4
,UD4X
,UD4R
,UD4F
,UD5
,UD5X
,UD5R
,UD5F
,UD6
,UD6X
,UD6R
,UD6F
,UD7
,UD7X
,UD7R
,UD7F
,UD8
,UD8X
,UD8R
,UD8F
,UD9
,UD9X
,UD9R
,UD9F
,UD10
,UD10X
,UD10R
,UD10F
,UD11
,UD11X
,UD11R
,UD11F
,UD12
,UD12X
,UD12R
,UD12F
,UD13
,UD13X
,UD13R
,UD13F
,UD14
,UD14X
,UD14R
,UD14F
,UD15
,UD15X
,UD15R
,UD15F
,UD16
,UD16X
,UD16R
,UD16F
,UD17
,UD17X
,UD17R
,UD17F
,UD18
,UD18X
,UD18R
,UD18F
,UD19
,UD19X
,UD19R
,UD19F
,UD20
,UD20X
,UD20R
,UD20F
,ATTR1
,ATTR2
,ATTR3
,ATTR4
,ATTR5
,ATTR6
,ATTR7
,ATTR8
,ATTR9
,ATTR10
,ATTR11
,ATTR12
,ATTR13
,ATTR14
,ARCHIVEID
,HASMEMOITEM
,STATICDATAKEY
,LOADID
,RULE_ID,
CODE_COMBINATION_ID
,STAT_BALANCE_FLAG
,VALID_FLAG
FROM TDATASEG_T
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
2013-12-31 22:45:16,838 INFO [AIF]: Number of Rows inserted into TDATASEG: 10711
2013-12-31 22:45:16,858 DEBUG [AIF]:
DELETE FROM TDATASEG_T
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
2013-12-31 22:45:17,123 INFO [AIF]: Number of Rows deleted from TDATASEG_T: 10711
2013-12-31 22:45:17,153 DEBUG [AIF]:
DELETE FROM TDATAMAP_T
WHERE LOADID = 300
2013-12-31 22:45:17,156 INFO [AIF]: Number of Rows deleted from TDATAMAP_T: 8
2013-12-31 22:45:17,161 INFO [AIF]: COMM Load TDATAMAPSEG/TDATASEG - Load TDATAMAPSEG/TDATASEG - END
2013-12-31 22:45:17,993 DEBUG [AIF]:
SELECT CASE app.METADATA_LOAD_METHOD
WHEN 'EPMA' THEN CASE dim.TARGET_DIMENSION_CLASS_NAME
WHEN 'Generic' THEN dim.TARGET_DIMENSION_NAME
ELSE dim.TARGET_DIMENSION_CLASS_NAME
END
ELSE dim.TARGET_DIMENSION_NAME
END TARGET_DIMENSION_NAME
,adim.BALANCE_COLUMN_NAME
FROM AIF_TARGET_APPLICATIONS app
,AIF_TARGET_APPL_DIMENSIONS adim
,AIF_DIMENSIONS dim
WHERE app.APPLICATION_ID = 26
AND adim.APPLICATION_ID = app.APPLICATION_ID
AND dim.DIMENSION_ID = adim.DIMENSION_ID
AND dim.TARGET_DIMENSION_CLASS_NAME IN ('Custom1','Custom2','Custom3','Custom4','Generic')
2013-12-31 22:45:17,997 DEBUG [AIF]:
SELECT SCENARIO "Scenario"
,YEAR "Year"
,PERIOD "Period"
,DATAVIEW "View"
,DATAVALUE "Value"
,ACCOUNT "Account"
,ENTITY "Entity"
,ICP "ICP"
,UD2 "Area"
,UD1 "Tail"
,UD3 "Special"
,UD4 "Facility"
,AMOUNT "DataValue"
FROM AIF_HS_BALANCES
WHERE LOADID = 300
2013-12-31 22:45:18,000 INFO [SimpleAsyncTaskExecutor-9]: ODI Hyperion Financial Management Adapter
2013-12-31 22:45:18,002 INFO [SimpleAsyncTaskExecutor-9]: Load task initialized.
2013-12-31 22:45:18,028 INFO [AIF]: LKM COMM Load Data into HFM - Load Data to HFM - START
2013-12-31 22:45:18,031 DEBUG [AIF]:
INSERT INTO AIF_PROCESS_DETAILS (
PROCESS_ID
,ENTITY_TYPE
,ENTITY_ID
,ENTITY_NAME
,ENTITY_NAME_ORDER
,TARGET_TABLE_NAME
,EXECUTION_START_TIME
,EXECUTION_END_TIME
,RECORDS_PROCESSED
,STATUS
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
) VALUES (
300
,'PROCESS_BAL_EXP_HFM'
,NULL
,'FMTEST2'
,NULL
,NULL
,CURRENT_TIMESTAMP
,NULL
,NULL
,'RUNNING'
,'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER'
,CURRENT_TIMESTAMP
2013-12-31 22:45:18,034 INFO [SimpleAsyncTaskExecutor-9]: Connecting to Financial Management application [FMTEST2] on [10.150.20.40] using user-name [admin].
2013-12-31 22:45:18,155 INFO [SimpleAsyncTaskExecutor-9]: Connected to Financial Management application.
2013-12-31 22:45:18,157 INFO [SimpleAsyncTaskExecutor-9]: HFM Version: 11.1.2.2.300.
2013-12-31 22:45:18,160 INFO [SimpleAsyncTaskExecutor-9]: Options for the Financial Management load task are:
<Options>
<Option name=LOG_FILE_NAME value=C:\Windows\TEMP\/aif_501_300.log/>
<Option name=IMPORT_MODE value=Replace/>
<Option name=CONSOLIDATE_ONLY value=false/>
<Option name=CONSOLIDATE_PARAMETERS value=""/>
<Option name=LOG_ENABLED value=true/>
<Option name=ACCUMULATE_WITHIN_FILE value=false/>
<Option name=DEBUG_ENABLED value=true/>
<Option name=CONSOLIDATE_AFTER_LOAD value=false/>
<Option name=FILE_CONTAINS_SHARE_DATA value=false/>
</Options>
2013-12-31 22:45:18,168 INFO [SimpleAsyncTaskExecutor-9]: Load Options validated.
2013-12-31 22:45:18,176 ERROR [SimpleAsyncTaskExecutor-9]: Error occurred during load process ORA-00904: "DATAVALUE": invalid identifier
com.hyperion.odi.common.ODIHAppException: ORA-00904: "DATAVALUE": invalid identifier
at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:216)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:175)
at org.python.core.PyObject.__call__(PyObject.java:355)
at org.python.core.PyMethod.__call__(PyMethod.java:215)
at org.python.core.PyMethod.instancemethod___call__(PyMethod.java:221)
at org.python.core.PyMethod.__call__(PyMethod.java:206)
at org.python.core.PyObject.__call__(PyObject.java:397)
at org.python.core.PyObject.__call__(PyObject.java:401)
at org.python.pycode._pyx161.f$0(<string>:98)
at org.python.pycode._pyx161.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java:165)
at org.python.core.PyCode.call(PyCode.java:18)
at org.python.core.Py.runCode(Py.java:1204)
at org.python.core.Py.exec(Py.java:1248)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:172)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1889)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$2.doAction(StartScenRequestProcessor.java:580)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:513)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$StartScenTask.doExecute(StartScenRequestProcessor.java:1066)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:724)
Caused by: java.sql.SQLSyntaxErrorException: ORA-00904: "DATAVALUE": invalid identifier
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
at oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:942)
at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1283)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1441)
at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1690)
at oracle.jdbc.driver.OracleStatementWrapper.executeQuery(OracleStatementWrapper.java:446)
at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:212)
... 38 more
2013-12-31 22:45:18,208 DEBUG [AIF]:
UPDATE AIF_PROCESS_DETAILS
SET STATUS = 'FAILED'
,RECORDS_PROCESSED = CASE
WHEN RECORDS_PROCESSED IS NULL THEN 0
ELSE RECORDS_PROCESSED
END + 0
,EXECUTION_END_TIME = CURRENT_TIMESTAMP
,LAST_UPDATED_BY = CASE
WHEN ('native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' IS NULL) THEN LAST_UPDATED_BY
ELSE 'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER'
END
,LAST_UPDATE_DATE = CURRENT_TIMESTAMP
WHERE PROCESS_ID = 300
AND ENTITY_TYPE = 'PROCESS_BAL_EXP_HFM'
AND ENTITY_NAME = 'FMTEST2'
2013-12-31 22:45:18,210 FATAL [AIF]: Error in LKM CThe issue is that you are mapping "Data Value" to amount in the Target Application import format:
SELECT SCENARIO "Scenario"
,YEAR "Year"
,PERIOD "Period"
,DATAVIEW "View"
,DATAVALUE "Value"
,ACCOUNT "Account"
,ENTITY "Entity"
,ICP "ICP"
,UD2 "Area"
,UD1 "Tail"
,UD3 "Special"
,UD4 "Facility"
,AMOUNT "DataValue"
FROM AIF_HS_BALANCES
WHERE LOADID = 300
You need to map AMOUNT to "AMOUNT" in the HFM Application. Check that the dimension mapping is correct for the class in the target application and that your import format is going to the proper target dimension(Amount).
Maybe you are looking for
-
My computer has worked well since I bought it new. All of a sudden it will not recognize my i-phone to snyc. I receive an error message saying that -42404 is missing from i tunes and it then crashes....help please
-
How to install windows 7 on Imac late 2009 using Vmware/Vbox
Hey guys. Here's the thing. I've installed Windows 8 on my imac late 2009 but then i realized that there's no bootcamp drivers for it (check image). everything works fine except for the video drivers that crash everytime when i install any driver (bo
-
New Macbook, Itunes on old pc won't sync with iPhone 4S
I have my iTunes on my pc and I just got a MacBook Air, which I set up on my current Apple ID. now my iTunes on my pc won't sync with my iPhone 4s. Any help? Thanks, Steve
-
Reorder Albums in Web Gallery?
Is there a way to reorder an ALBUM in Web Gallery? In iPhoto you can change how the ALBUMS are ordered/shown (which ones come first). I can't seem to get it to work in Aperture. Shouldn't Aperture get features before iPhoto? thx
-
Login fails for a user after OS X Mavericks 10.9.4 update
I just updated my Mac Book Pro last night with the latest OS X Mavericks 10.9.4. The Mac Book Pro is not letting one of the users to login. I have two users on the Mac Book Pro and the second user is able to login without any problems. The password i