Error while loading into DTP
Hi,
I am loading data to a DSO from 0FI_AP_30. PSA I am able to load successfully but while loading this PSA data to DTP i get the following error message:
@5D@ Request REQU_D44GG0YIPPH7NBQ5F1VOCB890 not extracted; request is in obsolete version of DataSource @35@
and in help this is the respose:
Diagnosis
The request REQU_D44GG0YIPPH7NBQ5F1VOCB890 was loaded into the PSA table when the DataSource had a different structure to the current one. Incompatible changes have been made to the DataSource since then and the request cannot be extracted with the DTP anymore.
System Response
The request is in PSA /BIC/B0001232, version 001. The current PSA version is 002. An extraction would lead to a short dump because of field incompatibilities.
Procedure
If you no longer require the data, you do not need to take any further action.
If you do still require the data, you can just extract it by creating a generic DataSource in the Myself source system in PSA /BIC/B0001232, version 001. You can find the technical name of the PSA table in the table RSTSODS with the specified PSA name and version. Convert the data using a separate transformation into the new target format.
Please let me know what can be done for this? pl give me the solution.
Thanks & Regards,
Vijaya
Hi Vijaya,
I am also facing the same error for data source 2LIS_03_BF, i am unable to load the same in one DSO, can you elaborate how you solved your issue ASAP?
I can't run IP because this data source requires downtime in ecc. We have already done that.
Thanks & Regards
Manna Das
Similar Messages
-
Error While loading into BW using infoPackage
Hi All,
While following directions posted at the following wiki page https://wiki.sdn.sap.com/wiki/display/BOBJ/ConfiguretheLoadJobinBW%28DS+3.2%29,
we get an error while loading data into BW using infoPackage via Data services 3.2
In SAP BI side Error says :"Error while executing the following command: -sJO return code:220"
On DS side for the RFC server log we get the error" Error while executing the following command -sJOB_SQL_TO_DBI -Ubbu -P;(encrypted password) -A (encryted information) -VMODE=F"
Issue is still open with support as we still cannot excute the job from infopackage. it is succesfully executed from designer, admin console, batch file.
Any insights/help would be appreciated.
Thanks.
Edited by: rana_accn on Jan 26, 2010 6:48 PMSure I will.
One thing we have noticed is that in the server_eventlog parameter for the log line "Starting job with command line parameters are different"
When job is executed from DS side parameters -Ct -Cm -Ca -Cj -Cp -S -N -Q -U -P -G -r -T -Locale are used
When job is executed from BW side parameters -Ct -Cm -Ca -Cj -Cp -s -N -Q are used
Also when the job is executed from BW, log files start getting created but then trace and error file show an error that cannot open database - and that points to DSCentral repository.This repository is not even mapped to the job server and the job has been exported from the correct repository as command line execution of the job works perfectly fine.
Thnx
Just an update we were not able to figure out why this happened in the existing environment. One reason given was that somehow the commands which were being executed from BW side were getting corrupted. We had to build a new environment and this is no longer an issue in the new environment, as now all jobs can be executed from BW. Only difference between the 2 environments was we are now on 12.2.1.3 while earlier we were on 12.2.0.0.
Edited by: rana_accn on Mar 23, 2010 10:21 PM
Edited by: rana_accn on Apr 29, 2010 9:46 PM -
Hi,
We are facing some issue while loading the data from R/3 to BW using DTP.
We are getting the error (both for full and delta)as follows:
Data package 1:Errors during Processing
* Extraction datasource*
* Filter out new records with same key.*
* RSDS material*
* Update to datastore object*
* Unpack data package*
* Exception in substep:write data package*
* Processing terminated.*
* Set technical status to red*
* Set overall status to red*
* Set overall status to green*
* Further processing started*
* Set status to u2018Processed furtheru2019*
The expansion of the error Exception in substep: write data package:
Record 0, segment 0001 is not in teh cross-record table
Error while writing error stack
Record 0, segment 0001 is not in the cross-record table
Error in substep update to DataStore Object
We are using both start routine and end routine in the transformation.
Any help on this is highly appreciable.
End routine:
IF NOT RESULT_PACKAGE IS INITIAL.
SELECT salesorg comp_code FROM /bi0/psalesorg
INTO TABLE it_salesorg
FOR ALL ENTRIES IN RESULT_PACKAGE
WHERE salesorg = RESULT_PACKAGE-SALESORG
AND objvers = 'A'.
SELECT /bic/ZMATRTUGP FROM /bic/pZMATRTUGP
INTO TABLE it_mat
FOR ALL ENTRIES IN RESULT_PACKAGE
WHERE /bic/ZMATRTUGP = RESULT_PACKAGE-/bic/ZMATRTUGP.
it_data[] = RESULT_PACKAGE[].
ENDIF.
get company code from salesorg for all material
LOOP AT it_data INTO st_data.
w_tabix = sy-tabix.
READ TABLE it_salesorg INTO st_salesorg
WITH TABLE KEY salesorg = st_data-salesorg.
IF sy-subrc = 0.
st_data-comp_code = st_salesorg-compcode.
MODIFY it_data FROM st_data INDEX w_tabix.
ENDIF.
ENDLOOP.
REFRESH RESULT_PACKAGE.
RESULT_PACKAGE[] = it_data[].
*Finally check for each material if something has changed since the last
*loading : if yes compare and update, otherwise no upload
IF NOT it_mat[] IS INITIAL.
SELECT * FROM /bic/azalomrtu00
INTO TABLE it_check
FOR ALL ENTRIES IN it_mat
WHERE /bic/ZMATRTUGP = it_mat-zmaterial.
ENDIF.
DELETE it_check WHERE salesorg IS INITIAL.
CLEAR st_result_package.
LOOP AT RESULT_PACKAGE INTO st_RESULT_PACKAGE.
READ TABLE it_check INTO st_check
WITH TABLE KEY
/bic/ZMATRTUGP = st_result_package-/bic/ZMATRTUGP
CUST_GRP4 = st_result_package-CUST_GRP4
SALESORG = st_result_package-SALESORG
VALIDTO = st_result_package-VALIDTO.
IF sy-subrc = 0.
*If one of the characteristic is different, let that entry in the
*result_package otherwise no use updating it
IF st_check-/BIC/ZCSBRTUGP = st_result_package-/BIC/ZCSBRTUGP
AND st_check-/BIC/ZCONDTYPE = st_result_package-/BIC/ZCONDTYPE
AND st_check-comp_code = st_result_package-comp_code
AND st_check-/BIC/ZCNT_RTU = st_result_package-/bic/ZCNT_RTU
AND st_check-VALIDFROM = st_result_package-VALIDFROM.
DELETE RESULT_PACKAGE.
ELSE.
*entry is new : let it updated.
ENDIF.
DELETE it_check WHERE
/bic/ZMATRTUGP = st_result_package-/bic/ZMATRTUGP
AND CUST_GRP4 = st_result_package-CUST_GRP4
AND SALESORG = st_result_package-SALESORG
AND VALIDTO = st_result_package-VALIDTO.
ENDIF.
ENDLOOP.
*if some entries are in the ODS but not in the datapackage, they have to
*be deleted in the ODS since they don't exist anymore
LOOP AT it_check INTO st_check.
CLEAR st_result_package.
st_result_package-/bic/ZMATRTUGP = st_check-/bic/ZMATRTUGP.
st_result_package-CUST_GRP4 = st_check-CUST_GRP4.
st_result_package-SALESORG = st_check-SALESORG.
st_result_package-VALIDTO = st_check-VALIDTO.
st_result_package-recordmode = 'D'.
APPEND st_result_package TO RESULT_PACKAGE.
ENDLOOP.
Thanks in advance.
Thanks,
MeghanaHi Meghana
HAve you got an short dump in ST22 transaction ?
If yes, what is it ?
In your routine, maybe you should as well add a counter for index in your loop :
DATA : w_idx like sy-tabix.
When you loop at result_package, do : w_idx = sy-tabix.
And make : DELETE result_package INDEX w_idex.
Hope it helps you
Mickael -
Caller-70 Error while loading master data into infoobject
hi ,
I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings were PSA and then into data target.
Short dump in the Warehouse
Diagnosis
The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
System Response
"Caller 70" is missing.
ST22 dump analysis is as below:
Termination occurred in the ABAP program "GP476CZYBEF2WX53UZ8TXFG6XOS" - in
"VALUE_TO_SID_CONVERT_DB".
The main program was "RSMO1_RSM2 ".
Please help as soon as you can..Production problem....
Regards
RakeshHi rakesh,
May be IDOCs not processed completely,
Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
Cheers
Raj -
Error while loading data into Customers InfoCube
Hi All,
I am receicing the following error while loading the data into the following InfoCube 0SD_C01.
The error I am receiving is "LIS Updating is Still Active".
I am also receiving error similar to "The data is being edited at the time of loading the data request".
Does anybody have encountered such a situation...
Please help me out.
Regards
YJHi Dinesh and Paolo,
The links are very useful.
I went through the Transactions and found out that the Asynchronous Updating is going on for S001.
So what are the steps that I can take as a BW Consultant so that the data is loaded into BW.
Regards
YJ -
Error while loading data into cube 0calday to 0fiscper (2lis_13_vdcon)
Hi all,
I m getting following error while loading the data into cube.
"Time conversion from 0CALDAY to 0FISCPER (fiscal year V3 ) failed with value 10081031"
amit shetyeHi Amit,
This conversion problem. Calender not maintained for Fiscal variant "V3", for Year: 1008.
Maintain calender for year: 1008 and transfer global setting from soruce(R/3).
RSA1--> Source systems --> from context menu --> transfer global settings > choose fiscal year variants and calender> execute
Hope it Helps
Srini -
Error while load data into Essbase using ODI
Hi ,
I'm getting the following error while loading measures into Essbase using ODI, I used the same LOG nd Error file and file path for all my Dimensions , this worked well but not sure why this is not working for measures....need help.
File "<string>", line 79, in ?
com.hyperion.odi.common.ODIHAppException: c:/temp/Log1.log (No such file or directory)
Thanks
VenuAre you definitely running it against an agent where that path exists.
Have you tried using a different location and filename, have you restarted the agent to make sure there is not a lock on the file.
Cheers
John
http://john-goodwin.blogspot.com/ -
Runtime error while loading data into infocube
Hi all,
I am getting a runtime error while loading the transaction data into the InfoCube.
Exception name: CX_SY_GENERATE_SUBPOOL_FULL
Runtime error: GENERATE_SUBPOOL_DIR_FULL
Anyone has any idea about this error? Any help will be really helpful. Thanks in advance.
Regards,
SatheshHi Sathesh,
Please provide more details for the problem.
You can go and check in ST22. Go through the Dump Analysis and Let us know.
Regards
Hemant Khemani -
Error while loading data from DS into cube
Hello All
I am getting the below error while loading data from Data source to the cube.
Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20070331
Wht am i suppose to do?
Need ur input in this regard.
Regards
RohitHi
Simply map 0calday to 0fiscper(you already done it)..You might have forgotten to map fiscal year variant in update rules....if it comes from souce,just map it..if it won't comes from source...make it as constant in update rules and give value..
If your business is April to March make it as 'V3'
If your business is January to Decemeber make it as 'K4'..
activate your update rules delete old data and upload again....
Hope it helps
Thanks
Teja -
BI 7.0 - Duplicate Record Error while loading master data
I am working on BI 7.0 and I am trying to load master data to an info object.
I created an Infopackage and loaded into PSA.
I created transformation and DTP and I get an error after I execute the DTP about duplicate records.
I have read all previous threads about duplicate record error while loading master data and most of the them suggested to check 'Ignore duplicate records' option in the infopackage. But in 7.0, I can only load to PSA with infopackage and it doesn't have any option for me to ignore duplicate records.
My data is getting loaded to PSA fine and I get this error while loading to info object using DTP.
I would appreciate your help to resolve this issue.
Regards,
Ram.Hi,
Refer:
http://help.sap.com/saphelp_nw2004s/helpdata/en/45/2a8430131e03c3e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/538f3b294a7f2de10000000a11402f/frameset.htm
With rgds,
Anil Kumar Sharma .P -
Error while Loading Budgets Using AMG
Error while Loading Budgets Using AMG
Dear All,
I am trying to load Budgets into ORACLE Projects using AMG API's..
I have developed PL/SQL which uses below procedures of pa_budget_pub package.
init_budget;
load_budget_line;
execute_draft_budget;
baseline_budget;
Procedure execute_create_draft_budget fails with following error message.
error message: Please enter a valid product code for this project.
error message: You entered an invalid API parameter.Please enter valid parameter and try again. Parameter Name: Resource List Parameter Value: 1446
error message: Project: AC044. Please specify a valid resource list.
error message: Project: AC044. Please specify a valid resource list.
Could somebody explain me how to resolve this error message and load the budget lines.
Thanks in Advance.
Afsal Basha.What I'm saying is, verify the column name. Dont post if not possible.
Example follows, with one table intentionally "hidden".
SQL> create table "tEsT" ("MaxNumber" float, "MaxnumbeR" number);
SQL> select table_name,column_name from user_tab_columns where table_name like 't%';
TABLE_NAME COLUMN_NAME
tEsT MaxNumber
tEsT MaxnumbeR
teST iD
teST MaxNumberHth,
Fredrik -
Error While loading a image from database
Purpose
Error While loading the Image from the database
ORA-06502: PL/SQL : numeric or value error:Character string buffer too small
ORA-06512: at "Sys.HTP" ,line 1480
Requirement:
I am developing the web pages using PSP(Pl/sql Serverpages) . I have a requirement to show a image in the webpage. I got the following procedures from the oracle website.
I have created the following table to store the images
create table DEMO
ID INTEGER not null,
THEBLOB BLOB
And I also uploaded the Images. Now I am try to get a image from the table using the following procedure .But I am getting the error message line 25( htp.prn( utl_raw.cast_to_varchar2( l_raw ) );) .at it throws the following error messages
ORA-06502: PL/SQL : numeric or value error:Character string buffer too small
ORA-06512: at "Sys.HTP" ,line 1480
Procedure that I used to get the image
create or replace package body image_get
as
procedure gif( p_id in demo.id%type )
is
l_lob blob;
l_amt number default 30;
l_off number default 1;
l_raw raw(4096);
begin
select theBlob into l_lob
from demo
where id = p_id;
-- make sure to change this for your type!
owa_util.mime_header( 'image/gif' );
begin
loop
dbms_lob.read( l_lob, l_amt, l_off, l_raw );
-- it is vital to use htp.PRN to avoid
-- spurious line feeds getting added to your
-- document
htp.prn( utl_raw.cast_to_varchar2( l_raw ) );
l_off := l_off+l_amt;
l_amt := 4096;
end loop;
exception
when no_data_found then
NULL;
end;
end;
end;
What I have to do to correct this problem. This demo procedure and table that I am downloaded from oracle. Some where I made a mistake. any help??
Thanks,
NatsHi Satish,
I have set the raw value as 3600 but still its gives the same error only. When I debug the procedure its throwing the error stack in
SYS.htp.prn procedure of the following line of code
if (rows_in < pack_after) then
while ((len - loc) >= HTBUF_LEN)
loop
rows_in := rows_in + 1;
htbuf(rows_in) := substr(cbuf, loc + 1, HTBUF_LEN);
loc := loc + HTBUF_LEN;
end loop;
if (loc < len)
then
rows_in := rows_in + 1;
htbuf(rows_in) := substr(cbuf, loc + 1);
end if;
return;
end if;
Its a system procedure. I don't no how to proceed .. I am really stucked on this....is their any other method to take picture from the database and displayed in the web page.....???? any idea..../suggesstion??
Thanks for your help!!!. -
Getting error While loading data from ERP integrator to HFM
Hello,
We are getting the following error while loading the data from ERPI to HFM.
2013-12-31 22:44:54,133 INFO [AIF]: ERPI Process Start, Process ID: 300
2013-12-31 22:44:54,137 INFO [AIF]: ERPI Logging Level: DEBUG (5)
2013-12-31 22:44:54,139 INFO [AIF]: ERPI Log File: C:\Windows\TEMP\/aif_501_300.log
2013-12-31 22:44:54,141 INFO [AIF]: Jython Version: 2.5.1 (Release_2_5_1:6813, Sep 26 2009, 13:47:54)
[Java HotSpot(TM) 64-Bit Server VM (Oracle Corporation)]
2013-12-31 22:44:54,143 INFO [AIF]: Java Platform: java1.7.0_25
2013-12-31 22:44:56,821 INFO [AIF]: COMM Process Periods - Insert Periods - START
2013-12-31 22:44:56,828 DEBUG [AIF]:
SELECT l.SOURCE_LEDGER_ID
,l.SOURCE_LEDGER_NAME
,l.SOURCE_COA_ID
,l.CALENDAR_ID
,'0' SETID
,l.PERIOD_TYPE
,NULL LEDGER_TABLE_NAME
FROM AIF_BALANCE_RULES br
,AIF_COA_LEDGERS l
WHERE br.RULE_ID = 27
AND l.SOURCE_SYSTEM_ID = br.SOURCE_SYSTEM_ID
AND l.SOURCE_LEDGER_ID = br.SOURCE_LEDGER_ID
2013-12-31 22:44:56,834 DEBUG [AIF]:
INSERT INTO AIF_PROCESS_PERIODS (
PROCESS_ID
,PERIODKEY
,PERIOD_ID
,ADJUSTMENT_PERIOD_FLAG
,GL_PERIOD_YEAR
,GL_PERIOD_NUM
,GL_PERIOD_NAME
,GL_PERIOD_CODE
,GL_EFFECTIVE_PERIOD_NUM
,YEARTARGET
,PERIODTARGET
,IMP_ENTITY_TYPE
,IMP_ENTITY_ID
,IMP_ENTITY_NAME
,TRANS_ENTITY_TYPE
,TRANS_ENTITY_ID
,TRANS_ENTITY_NAME
,PRIOR_PERIOD_FLAG
,SOURCE_LEDGER_ID
SELECT DISTINCT brl.LOADID PROCESS_ID
,pp.PERIODKEY PERIODKEY
,prd.PERIOD_ID
,COALESCE(prd.ADJUSTMENT_PERIOD_FLAG, 'N') ADJUSTMENT_PERIOD_FLAG
,COALESCE(prd.YEAR,0) GL_PERIOD_YEAR
,COALESCE(prd.PERIOD_NUM,0) GL_PERIOD_NUM
,prd.PERIOD_NAME GL_PERIOD_NAME
,COALESCE(prd.PERIOD_CODE, CAST(COALESCE(prd.PERIOD_NUM,0) AS VARCHAR(38))) GL_PERIOD_CODE
,(COALESCE(prd.YEAR,0) * 10000 + COALESCE(prd.PERIOD_NUM,0)) GL_EFFECTIVE_PERIOD_NUM
,COALESCE(ppa.YEARTARGET, pp.YEARTARGET) YEARTARGET
,COALESCE(ppa.PERIODTARGET, pp.PERIODTARGET) PERIODTARGET
,'PROCESS_BAL_IMP' IMP_ENTITY_TYPE
,(COALESCE(prd.YEAR,0) * 10000 + COALESCE(prd.PERIOD_NUM,0)) IMP_ENTITY_ID
,prd.PERIOD_NAME IMP_ENTITY_NAME
,'PROCESS_BAL_TRANS' TRANS_ENTITY_TYPE
,(COALESCE(prd.YEAR,0) * 10000 + COALESCE(prd.PERIOD_NUM,0)) TRANS_ENTITY_ID
,pp.PERIODDESC TRANS_ENTITY_NAME
,'N' PRIOR_PERIOD_FLAG
,1 SOURCE_LEDGER_ID
FROM (
AIF_BAL_RULE_LOADS brl
INNER JOIN TPOVCATEGORY pc
ON pc.CATKEY = brl.CATKEY
INNER JOIN TPOVPERIOD_FLAT_V pp
ON pp.PERIODFREQ = pc.CATFREQ
AND pp.PERIODKEY >= brl.START_PERIODKEY
AND pp.PERIODKEY <= brl.END_PERIODKEY
LEFT OUTER JOIN TPOVPERIODADAPTOR_FLAT_V ppa
ON ppa.PERIODKEY = pp.PERIODKEY
AND ppa.PERIODFREQ = pp.PERIODFREQ
AND ppa.INTSYSTEMKEY = 'FMTEST2'
INNER JOIN AIF_GL_PERIODS_STG prd
ON prd.SOURCE_SYSTEM_ID = 3
AND prd.CALENDAR_ID IN ('10000')
AND prd.SETID = '0'
AND prd.PERIOD_TYPE = 'Month'
AND prd.ADJUSTMENT_PERIOD_FLAG = 'N'
AND prd.START_DATE > pp.PRIORPERIODKEY
AND prd.START_DATE <= pp.PERIODKEY
WHERE brl.LOADID = 300
ORDER BY pp.PERIODKEY
,GL_EFFECTIVE_PERIOD_NUM
2013-12-31 22:44:56,915 INFO [AIF]: COMM Process Periods - Insert Periods - END
2013-12-31 22:44:56,945 INFO [AIF]: COMM Process Periods - Insert Process Details - START
2013-12-31 22:44:56,952 DEBUG [AIF]:
INSERT INTO AIF_PROCESS_DETAILS (
PROCESS_ID
,ENTITY_TYPE
,ENTITY_ID
,ENTITY_NAME
,ENTITY_NAME_ORDER
,TARGET_TABLE_NAME
,EXECUTION_START_TIME
,EXECUTION_END_TIME
,RECORDS_PROCESSED
,STATUS
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
SELECT PROCESS_ID
,ENTITY_TYPE
,ENTITY_ID
,ENTITY_NAME
,ENTITY_NAME_ORDER
,'AIF_EBS_GL_BALANCES_STG' TARGET_TABLE_NAME
,CURRENT_TIMESTAMP EXECUTION_START_TIME
,NULL EXECUTION_END_TIME
,0 RECORDS_PROCESSED
,'PENDING' STATUS
,'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' LAST_UPDATED_BY
,CURRENT_TIMESTAMP LAST_UPDATE_DATE
FROM (
SELECT DISTINCT PROCESS_ID
,IMP_ENTITY_TYPE ENTITY_TYPE
,IMP_ENTITY_ID ENTITY_ID
,IMP_ENTITY_NAME ENTITY_NAME
,(COALESCE(SOURCE_LEDGER_ID,0) * 100000000 + GL_EFFECTIVE_PERIOD_NUM) ENTITY_NAME_ORDER
FROM AIF_PROCESS_PERIODS
WHERE PROCESS_ID = 300
) q
ORDER BY ENTITY_NAME_ORDER
2013-12-31 22:44:56,963 DEBUG [AIF]:
INSERT INTO AIF_PROCESS_DETAILS (
PROCESS_ID
,ENTITY_TYPE
,ENTITY_ID
,ENTITY_NAME
,ENTITY_NAME_ORDER
,TARGET_TABLE_NAME
,EXECUTION_START_TIME
,EXECUTION_END_TIME
,RECORDS_PROCESSED
,STATUS
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
SELECT PROCESS_ID
,ENTITY_TYPE
,ENTITY_ID
,ENTITY_NAME
,ENTITY_NAME_ORDER
,'TDATASEG' TARGET_TABLE_NAME
,CURRENT_TIMESTAMP EXECUTION_START_TIME
,NULL EXECUTION_END_TIME
,0 RECORDS_PROCESSED
,'PENDING' STATUS
,'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' LAST_UPDATED_BY
,CURRENT_TIMESTAMP LAST_UPDATE_DATE
FROM (
SELECT PROCESS_ID
,TRANS_ENTITY_TYPE ENTITY_TYPE
,MIN(TRANS_ENTITY_ID) ENTITY_ID
,TRANS_ENTITY_NAME ENTITY_NAME
,MIN(COALESCE(SOURCE_LEDGER_ID,0) * 100000000 + GL_EFFECTIVE_PERIOD_NUM) ENTITY_NAME_ORDER
FROM AIF_PROCESS_PERIODS
WHERE PROCESS_ID = 300
AND PRIOR_PERIOD_FLAG = 'N'
GROUP BY PROCESS_ID
,TRANS_ENTITY_TYPE
,TRANS_ENTITY_NAME
) q
ORDER BY ENTITY_NAME_ORDER
2013-12-31 22:44:56,970 INFO [AIF]: COMM Process Periods - Insert Process Details - END
2013-12-31 22:44:57,407 DEBUG [AIF]: EBS/FS GL Balances Print Variables - Printing Variables - START
2013-12-31 22:44:57,408 DEBUG [AIF]:
p_process_id: 300
p_sql_db_type: ORACLE
p_partitionkey: 12
p_rule_id: 27
p_source_system_id: 3
p_application_id: 26
p_target_application_type: HFM
p_is_multi_currency: true
p_data_load_method: CLASSIC_VIA_EPMI
p_bal_balance_method_code: STANDARD
p_bal_ledger_group_code: SINGLE
p_bal_amount_type: MONETARY
p_prd_entity_name: JAN-13
p_prd_period_id: 135
p_prd_gl_period_name: JAN-13
p_prd_source_ledger_id: 1
p_prd_source_coa_id: 101
p_source_ledger_id: 1
p_source_coa_id: 101
p_bal_actual_flag: A
p_bal_seg_column_name: SEGMENT1
p_max_ccid_loaded_to_stg: 148137
2013-12-31 22:44:57,408 DEBUG [AIF]: EBS/FS GL Balances Print Variables - Printing Variables - END
2013-12-31 22:44:57,806 INFO [AIF]: LKM EBS/FS Extract Type - Load Audit AND Full Refresh - START
2013-12-31 22:44:57,817 DEBUG [AIF]:
SELECT p.PROCESS_ID
,br.RULE_NAME
,l.SOURCE_LEDGER_NAME
FROM AIF_GL_LOAD_AUDIT aud
,AIF_PROCESSES p
,AIF_BALANCE_RULES br
,AIF_COA_LEDGERS l
WHERE aud.SOURCE_SYSTEM_ID = 3
AND aud.SOURCE_LEDGER_ID = 1
AND aud.GL_PERIOD_ID = 135
AND aud.BALANCE_TYPE = 'A'
AND p.PROCESS_ID = aud.LAST_LOADID
AND p.STATUS = 'RUNNING'
AND p.PROCESS_ID <> 300
AND br.RULE_ID = p.RULE_ID
AND l.SOURCE_SYSTEM_ID = aud.SOURCE_SYSTEM_ID
AND l.SOURCE_LEDGER_ID = aud.SOURCE_LEDGER_ID
2013-12-31 22:44:57,826 DEBUG [AIF]:
SELECT 'Y' VALID_FLAG
FROM GL_PERIOD_STATUSES
WHERE APPLICATION_ID = 101
AND SET_OF_BOOKS_ID = 1
AND PERIOD_NAME = 'JAN-13'
AND CLOSING_STATUS IN ( 'O','C','P' )
2013-12-31 22:44:57,847 DEBUG [AIF]:
SELECT 'Y' EXISTS_FLAG
FROM GL_TRACK_DELTA_BALANCES
WHERE SET_OF_BOOKS_ID = 1
AND PROGRAM_CODE = 'FEM'
AND PERIOD_NAME = 'JAN-13'
AND ACTUAL_FLAG = 'A'
AND EXTRACT_LEVEL_CODE = 'DTL'
AND CURRENCY_TYPE_CODE = 'B'
AND ENABLED_FLAG = 'Y'
2013-12-31 22:44:57,883 DEBUG [AIF]:
SELECT MAX(DELTA_RUN_ID) MAX_DELTA_RUN_ID
FROM GL_BALANCES_DELTA
WHERE SET_OF_BOOKS_ID = 1
AND PERIOD_NAME = 'JAN-13'
AND ACTUAL_FLAG = 'A'
2013-12-31 22:44:57,898 DEBUG [AIF]:
SELECT brl.EXECUTION_MODE
,( SELECT CASE COUNT(aud.DELTA_RUN_ID) WHEN 0 THEN 'N' ELSE 'Y' END
FROM AIF_GL_LOAD_AUDIT aud
WHERE aud.SOURCE_SYSTEM_ID = 3
AND aud.SOURCE_LEDGER_ID = 1
AND aud.GL_PERIOD_ID = 135
AND aud.BALANCE_TYPE = 'A'
AND aud.LAST_LOADID <> brl.LOADID
AND COALESCE( aud.STATUS, 'SUCCESS' ) = 'SUCCESS'
) GL_LOAD_AUDIT_SUCCESS_FLAG
,( SELECT CASE COUNT(aud.DELTA_RUN_ID) WHEN 0 THEN 'N' ELSE 'Y' END
FROM AIF_GL_LOAD_AUDIT aud
WHERE aud.SOURCE_SYSTEM_ID = 3
AND aud.SOURCE_LEDGER_ID = 1
AND aud.GL_PERIOD_ID = 135
AND aud.BALANCE_TYPE = 'A'
AND aud.LAST_LOADID <> brl.LOADID
AND aud.STATUS = 'RUNNING'
) GL_LOAD_AUDIT_RUNNING_FLAG
FROM AIF_BAL_RULE_LOADS brl
WHERE brl.LOADID = 300
2013-12-31 22:44:57,904 DEBUG [AIF]:
INSERT INTO AIF_GL_LOAD_AUDIT ( LAST_LOADID
,DELTA_RUN_ID
,SOURCE_SYSTEM_ID
,SOURCE_LEDGER_ID
,GL_PERIOD_ID
,BALANCE_TYPE
,GL_EXTRACT_TYPE
,STATUS
) VALUES ( 300
,0
,3
,1
,135
,'A'
,'FULLREFRESH'
,'RUNNING'
2013-12-31 22:44:57,907 DEBUG [AIF]:
DELETE FROM AIF_EBS_GL_BALANCES_STG
WHERE SOURCE_SYSTEM_ID = 3
AND SOURCE_COA_ID = 101
AND SOURCE_LEDGER_ID = 1
AND ACTUAL_FLAG = 'A'
AND PERIOD_NAME = 'JAN-13'
2013-12-31 22:44:59,283 INFO [AIF]: LKM EBS/FS Extract Type - Load Audit AND Full Refresh - END
2013-12-31 22:45:06,507 INFO [AIF]: COMM End Process Detail - Update Process Detail - START
2013-12-31 22:45:06,514 DEBUG [AIF]:
UPDATE AIF_PROCESS_DETAILS
SET STATUS = 'SUCCESS'
,RECORDS_PROCESSED = CASE
WHEN RECORDS_PROCESSED IS NULL THEN 0
ELSE RECORDS_PROCESSED
END + 57408
,EXECUTION_END_TIME = CURRENT_TIMESTAMP
,LAST_UPDATED_BY = CASE
WHEN ('native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' IS NULL) THEN LAST_UPDATED_BY
ELSE 'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER'
END
,LAST_UPDATE_DATE = CURRENT_TIMESTAMP
WHERE PROCESS_ID = 300
AND ENTITY_TYPE = 'PROCESS_BAL_IMP'
AND ENTITY_NAME = 'JAN-13'
2013-12-31 22:45:06,519 INFO [AIF]: COMM End Process Detail - Update Process Detail - END
2013-12-31 22:45:07,106 INFO [AIF]: EBS/FS Load Data - Load TDATASEG_T - START
2013-12-31 22:45:07,112 INFO [AIF]:
Import Data from Source for Period 'January 2013'
2013-12-31 22:45:07,115 DEBUG [AIF]:
SELECT brl.PARTITIONKEY
,brl.CATKEY
,brl.PLAN_TYPE
,CASE brl.PLAN_TYPE
WHEN 'PLAN1' THEN 1
WHEN 'PLAN2' THEN 2
WHEN 'PLAN3' THEN 3
WHEN 'PLAN4' THEN 4
WHEN 'PLAN5' THEN 5
ELSE 0
END PLAN_NUMBER
,brl.EXECUTION_MODE
,br.AMOUNT_TYPE
,br.BALANCE_SELECTION
,br.CURRENCY_CODE
,br.INCL_ZERO_BALANCE_FLAG
,br.BAL_SEG_VALUE_OPTION_CODE
,COALESCE(br.BALANCE_AMOUNT_BS, 'YTD') BALANCE_AMOUNT_BS
,COALESCE(br.BALANCE_AMOUNT_IS, 'PERIODIC') BALANCE_AMOUNT_IS
FROM AIF_BAL_RULE_LOADS brl
,AIF_TARGET_APPLICATIONS app
,AIF_BALANCE_RULES br
WHERE brl.LOADID = 300
AND app.APPLICATION_ID = brl.APPLICATION_ID
AND br.RULE_ID = brl.RULE_ID
2013-12-31 22:45:07,120 DEBUG [AIF]:
SELECT PERIODKEY
FROM TPOVPERIOD
WHERE PERIODDESC = 'January 2013'
2013-12-31 22:45:07,122 INFO [AIF]:
Import Data from Source for Ledger 'JWR Books'
2013-12-31 22:45:07,125 DEBUG [AIF]:
SELECT COA_SEGMENT_NAME
,ACCOUNT_TYPE_FLAG
,BALANCE_TYPE_FLAG
FROM AIF_COA_SEGMENTS
WHERE SOURCE_SYSTEM_ID = 3
AND SOURCE_COA_ID = '101'
AND (
ACCOUNT_TYPE_FLAG = 'Y'
OR BALANCE_TYPE_FLAG = 'Y'
2013-12-31 22:45:07,127 DEBUG [AIF]:
SELECT adim.BALANCE_COLUMN_NAME DIMNAME
,adim.DIMENSION_ID
,dim.TARGET_DIMENSION_CLASS_NAME
,(SELECT COA_SEGMENT_NAME
FROM AIF_COA_SEGMENTS cs
WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID1
) COA_SEGMENT_NAME1
,(SELECT COA_SEGMENT_NAME
FROM AIF_COA_SEGMENTS cs
WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID2
) COA_SEGMENT_NAME2
,(SELECT COA_SEGMENT_NAME
FROM AIF_COA_SEGMENTS cs
WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID3
) COA_SEGMENT_NAME3
,(SELECT COA_SEGMENT_NAME
FROM AIF_COA_SEGMENTS cs
WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID4
) COA_SEGMENT_NAME4
,(SELECT COA_SEGMENT_NAME
FROM AIF_COA_SEGMENTS cs
WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID5
) COA_SEGMENT_NAME5
,(SELECT CASE mdd.ORPHAN_OPTION_CODE
WHEN 'CHILD' THEN 'N'
WHEN 'ROOT' THEN 'N'
ELSE 'Y'
END DIMENSION_FILTER_FLAG
FROM AIF_MAP_DIM_DETAILS_V mdd
,AIF_MAPPING_RULES mr
WHERE mr.PARTITIONKEY = tpp.PARTITIONKEY
AND mdd.RULE_ID = mr.RULE_ID
AND mdd.DIMENSION_ID = adim.DIMENSION_ID
) DIMENSION_FILTER_FLAG
,tiie.IMPCONCATCHAR
FROM TPOVPARTITION tpp
INNER JOIN AIF_TARGET_APPL_DIMENSIONS adim
ON adim.APPLICATION_ID = 26
INNER JOIN AIF_DIMENSIONS dim
ON dim.DIMENSION_ID = adim.DIMENSION_ID
LEFT OUTER JOIN TBHVIMPITEMERPI tiie
ON tiie.IMPGROUPKEY = tpp.PARTIMPGROUP
AND tiie.IMPFLDFIELDNAME = adim.BALANCE_COLUMN_NAME
AND tiie.IMPMAPTYPE = 'ERP'
WHERE tpp.PARTITIONKEY = 12
AND adim.BALANCE_COLUMN_NAME IS NOT NULL
ORDER BY adim.BALANCE_COLUMN_NAME
2013-12-31 22:45:07,154 DEBUG [AIF]:
INSERT INTO TDATASEG_T (
LOADID
,PARTITIONKEY
,CATKEY
,RULE_ID
,PERIODKEY
,VALID_FLAG
,CHANGESIGN
,CODE_COMBINATION_ID
,SOURCE_LEDGER_ID
,GL_PERIOD_YEAR
,GL_PERIOD_NUM
,YEAR
,PERIOD
,ATTR1
,ATTR2
,ATTR3
,ATTR4
,ATTR5
,ATTR6
,ATTR7
,ATTR8
,ATTR9
,ATTR10
,ATTR11
,ATTR12
,ATTR13
,ATTR14
,ACCOUNT
,ACCOUNTX
,ENTITY
,ENTITYX
,ICP
,ICPX
,UD1
,UD1X
,UD2
,UD2X
,UD3
,UD3X
,UD4
,UD4X
,DATAVIEW
,DATAKEY
,STAT_BALANCE_FLAG
,CURKEY
,AMOUNT_PTD
,AMOUNT_YTD
,AMOUNT
,AMOUNTX
SELECT pprd.PROCESS_ID LOADID
,12 PARTITIONKEY
,4 CATKEY
,27 RULE_ID
,pprd.PERIODKEY
,'Y' VALID_FLAG
,0 CHANGESIGN
,ccid.CODE_COMBINATION_ID
,bal.SOURCE_LEDGER_ID
,pprd.GL_PERIOD_YEAR
,pprd.GL_PERIOD_NUM
,pprd.YEARTARGET YEAR
,pprd.PERIODTARGET PERIOD
,pprd.PROCESS_ID ATTR1
,bal.SOURCE_SYSTEM_ID ATTR2
,bal.SOURCE_LEDGER_ID ATTR3
,pprd.GL_PERIOD_YEAR ATTR4
,pprd.GL_PERIOD_NAME ATTR5
,bal.ACTUAL_FLAG ATTR6
,bal.BUDGET_VERSION_ID ATTR7
,bal.ENCUMBRANCE_TYPE_ID ATTR8
,ccid.ACCOUNT_TYPE ATTR9
,NULL ATTR10
,NULL ATTR11
,NULL ATTR12
,NULL ATTR13
,NULL ATTR14
,ccid.SEGMENT4 ACCOUNT
,NULL ACCOUNTX
,ccid.SEGMENT1 ENTITY
,NULL ENTITYX
,NULL ICP
,NULL ICPX
,ccid.SEGMENT5 UD1
,NULL UD1X
,ccid.SEGMENT3 UD2
,NULL UD2X
,ccid.SEGMENT6 UD3
,NULL UD3X
,ccid.SEGMENT2 UD4
,NULL UD4X
,( CASE WHEN ccid.ACCOUNT_TYPE IN ('R','E','D','C') THEN 'Periodic' ELSE 'YTD' END ) DATAVIEW
,TDATASEG_DATAKEY_S.NEXTVAL
,'N' STAT_BALANCE_FLAG
,bal.CURRENCY_CODE CURKEY
,( CASE WHEN ccid.ACCOUNT_TYPE IN ('A','E','D') THEN 1 ELSE -1 END ) * ( bal.PERIOD_NET_DR - bal.PERIOD_NET_CR ) AMOUNT_PTD
,( CASE WHEN ccid.ACCOUNT_TYPE IN ('A','E','D') THEN 1 ELSE -1 END ) * ( bal.BEGIN_BALANCE_DR - bal.BEGIN_BALANCE_CR + bal.PERIOD_NET_DR - bal.PERIOD_NET_CR ) AMOUNT_YTD
,( CASE WHEN ccid.ACCOUNT_TYPE IN ('A','E','D') THEN 1 ELSE -1 END ) *
( CASE
WHEN ccid.ACCOUNT_TYPE IN ('R','E','D','C') THEN ( bal.PERIOD_NET_DR - bal.PERIOD_NET_CR )
ELSE ( bal.BEGIN_BALANCE_DR - bal.BEGIN_BALANCE_CR + bal.PERIOD_NET_DR - bal.PERIOD_NET_CR )
END
AMOUNT
,( CASE WHEN ccid.ACCOUNT_TYPE IN ('A','E','D') THEN 1 ELSE -1 END ) *
( CASE
WHEN ccid.ACCOUNT_TYPE IN ('R','E','D','C') THEN ( bal.PERIOD_NET_DR - bal.PERIOD_NET_CR )
ELSE ( bal.BEGIN_BALANCE_DR - bal.BEGIN_BALANCE_CR + bal.PERIOD_NET_DR - bal.PERIOD_NET_CR )
END
AMOUNTX
FROM AIF_EBS_GL_BALANCES_STG_V bal
,AIF_EBS_GL_CCID_STG ccid
,AIF_PROCESS_PERIODS pprd
WHERE bal.SOURCE_SYSTEM_ID = 3
AND bal.SOURCE_LEDGER_ID = 1
AND bal.ACTUAL_FLAG = 'A'
AND ccid.SOURCE_SYSTEM_ID = bal.SOURCE_SYSTEM_ID
AND ccid.SOURCE_COA_ID = bal.SOURCE_COA_ID
AND ccid.CODE_COMBINATION_ID = bal.CODE_COMBINATION_ID
AND pprd.PROCESS_ID = 300
AND pprd.PERIODKEY = '2013-01-01'
AND pprd.SOURCE_LEDGER_ID = bal.SOURCE_LEDGER_ID
AND pprd.GL_PERIOD_NAME = bal.PERIOD_NAME
AND (
bal.BEGIN_BALANCE_DR <> 0
OR bal.BEGIN_BALANCE_CR <> 0
OR bal.PERIOD_NET_DR <> 0
OR bal.PERIOD_NET_CR <> 0
AND bal.CURRENCY_CODE <> 'STAT'
AND bal.TRANSLATED_FLAG IS NULL
2013-12-31 22:45:09,269 INFO [AIF]: Monetary Data Rows Imported from Source: 12590
2013-12-31 22:45:09,293 DEBUG [AIF]:
INSERT INTO AIF_APPL_LOAD_AUDIT (
LOADID
,TARGET_APPLICATION_TYPE
,TARGET_APPLICATION_NAME
,PLAN_TYPE
,SOURCE_LEDGER_ID
,EPM_YEAR
,EPM_PERIOD
,SNAPSHOT_FLAG
,PARTITIONKEY
,CATKEY
,RULE_ID
,PERIODKEY
,EXPORT_TO_TARGET_FLAG
SELECT DISTINCT PROCESS_ID LOADID
,'HFM' TARGET_APPLICATION_TYPE
,'FMTEST2' TARGET_APPLICATION_NAME
,NULL PLAN_TYPE
,SOURCE_LEDGER_ID
,YEARTARGET EPM_YEAR
,PERIODTARGET EPM_PERIOD
,'Y' SNAPSHOT_FLAG
,12 PARTITIONKEY
,4 CATKEY
,27 RULE_ID
,PERIODKEY
,'N' EXPORT_TO_TARGET_FLAG
FROM AIF_PROCESS_PERIODS
WHERE PROCESS_ID = 300
AND PERIODKEY = '2013-01-01'
AND SOURCE_LEDGER_ID = 1
2013-12-31 22:45:09,297 DEBUG [AIF]:
INSERT INTO AIF_APPL_LOAD_PRD_AUDIT (
LOADID
,SOURCE_LEDGER_ID
,GL_PERIOD_ID
,DELTA_RUN_ID
,PARTITIONKEY
,CATKEY
,RULE_ID
,PERIODKEY
SELECT DISTINCT pprd.PROCESS_ID LOADID
,pprd.SOURCE_LEDGER_ID
,pprd.PERIOD_ID GL_PERIOD_ID
,(SELECT MAX(gl.DELTA_RUN_ID)
FROM AIF_GL_LOAD_AUDIT gl
WHERE gl.SOURCE_SYSTEM_ID = 3
AND gl.SOURCE_LEDGER_ID = pprd.SOURCE_LEDGER_ID
AND gl.BALANCE_TYPE = 'A'
AND gl.GL_PERIOD_ID = pprd.PERIOD_ID
) DELTA_RUN_ID
,12 PARTITIONKEY
,4 CATKEY
,27 RULE_ID
,pprd.PERIODKEY
FROM AIF_PROCESS_PERIODS pprd
WHERE pprd.PROCESS_ID = 300
AND pprd.PERIODKEY = '2013-01-01'
AND pprd.SOURCE_LEDGER_ID = 1
2013-12-31 22:45:09,302 INFO [AIF]:
Total Data Rows Imported from Source: 12590
2013-12-31 22:45:09,305 INFO [AIF]: EBS/FS Load Data - Load TDATASEG_T - END
2013-12-31 22:45:09,381 INFO [AIF]: COMM Update Data - Init DataLoadUtil - START
2013-12-31 22:45:09,385 INFO [AIF]: COMM Update Data - Init DataLoadUtil - END
2013-12-31 22:45:09,485 INFO [AIF]: COMM Update Data - Update TDATASEG_T/TDATASEGW - START
2013-12-31 22:45:09,491 DEBUG [AIF]:
DELETE FROM TDATASEG_T
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND AMOUNT = 0
2013-12-31 22:45:09,559 WARN [AIF]:
Warning: Data rows with zero balances exist
2013-12-31 22:45:09,636 INFO [AIF]: Zero Balance Data Rows Deleted: 1879
2013-12-31 22:45:09,654 DEBUG [AIF]:
SELECT DIMNAME
,CASE WHEN RULE_ID IS NULL THEN 'N' ELSE 'Y' END RULE_MAP_FLAG
,SRCKEY
,TARGKEY
,WHERECLAUSETYPE
,WHERECLAUSEVALUE
,CHANGESIGN
,SEQUENCE
,DATAKEY
,MAPPING_TYPE
FROM (
SELECT DISTINCT tdm.DIMNAME
,tdm.RULE_ID
,NULL SRCKEY
,NULL TARGKEY
,tdm.WHERECLAUSETYPE
,tdm.WHERECLAUSEVALUE
,NULL CHANGESIGN
,1 SEQUENCE
,COALESCE(tdm.SYSTEM_GENERATED_FLAG,'N') SYSTEM_GENERATED_FLAG
,NULL DATAKEY
,CASE
WHEN tdm.WHERECLAUSETYPE IS NULL THEN 1
ELSE 3
END MAPPING_TYPE
FROM TDATAMAP_T tdm
WHERE tdm.LOADID = 300
AND tdm.PARTITIONKEY = 12
AND tdm.TDATAMAPTYPE = 'ERP'
AND (tdm.RULE_ID IS NULL OR tdm.RULE_ID = 27)
AND tdm.WHERECLAUSETYPE IS NULL
UNION ALL
SELECT tdm.DIMNAME
,tdm.RULE_ID
,tdm.SRCKEY
,tdm.TARGKEY
,tdm.WHERECLAUSETYPE
,tdm.WHERECLAUSEVALUE
,tdm.CHANGESIGN
,CASE tpp.PARTSEQMAP
WHEN 0 THEN CASE
WHEN (tdm.WHERECLAUSETYPE = 'MULTIDIM') THEN 2
WHEN (tdm.WHERECLAUSETYPE = 'BETWEEN') THEN 3
WHEN (tdm.WHERECLAUSETYPE = 'LIKE') THEN 4
ELSE 0
END
ELSE tdm.SEQUENCE
END SEQUENCE
,COALESCE(tdm.SYSTEM_GENERATED_FLAG,'N') SYSTEM_GENERATED_FLAG
,tdm.DATAKEY
,CASE
WHEN tdm.WHERECLAUSETYPE IS NULL THEN 1
ELSE 3
END MAPPING_TYPE
FROM TDATAMAP_T tdm
INNER JOIN TPOVPARTITION tpp
ON tpp.PARTITIONKEY = tdm.PARTITIONKEY
WHERE tdm.LOADID = 300
AND tdm.PARTITIONKEY = 12
AND tdm.TDATAMAPTYPE = 'ERP'
AND (tdm.RULE_ID IS NULL OR tdm.RULE_ID = 27)
AND tdm.WHERECLAUSETYPE IN ('MULTIDIM','BETWEEN','LIKE')
) q
ORDER BY DIMNAME
,RULE_ID
,SEQUENCE
,SYSTEM_GENERATED_FLAG
,SRCKEY
2013-12-31 22:45:09,672 INFO [AIF]:
Processing Mappings for Column 'ACCOUNT'
2013-12-31 22:45:09,677 DEBUG [AIF]:
UPDATE TDATASEG_T
SET ACCOUNTX = ACCOUNT
,ACCOUNTR = 121
,ACCOUNTF = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '*' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND ACCOUNTX IS NULL
AND (1=1)
2013-12-31 22:45:10,044 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:10,053 INFO [AIF]:
Processing Mappings for Column 'ENTITY'
2013-12-31 22:45:10,057 DEBUG [AIF]:
UPDATE TDATASEG_T
SET ENTITYX = ENTITY
,ENTITYR = 122
,ENTITYF = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '*' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND ENTITYX IS NULL
AND (1=1)
2013-12-31 22:45:10,426 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:10,435 DEBUG [AIF]:
UPDATE TDATASEG_T
SET ENTITYX = ENTITY
,ENTITYR = 132
,ENTITYF = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '*' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND ENTITYX IS NULL
AND (1=1)
2013-12-31 22:45:10,446 INFO [AIF]: Data Rows Updated by Location Mapping 'DEFAULT' (LIKE): 0
2013-12-31 22:45:10,448 INFO [AIF]:
Processing Mappings for Column 'ICP'
2013-12-31 22:45:10,452 DEBUG [AIF]:
UPDATE TDATASEG_T
SET ICPX = '[ICP None]'
,ICPR = 130
,ICPF = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '[ICP None]' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND ICPX IS NULL
AND (1=1)
2013-12-31 22:45:10,784 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:10,798 INFO [AIF]:
Processing Mappings for Column 'UD1'
2013-12-31 22:45:10,802 DEBUG [AIF]:
UPDATE TDATASEG_T
SET UD1X = '[None]'
,UD1R = 124
,UD1F = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '[None]' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND UD1X IS NULL
AND (1=1)
2013-12-31 22:45:11,134 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:11,156 INFO [AIF]:
Processing Mappings for Column 'UD2'
2013-12-31 22:45:11,160 DEBUG [AIF]:
UPDATE TDATASEG_T
SET UD2X = '[None]'
,UD2R = 123
,UD2F = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '[None]' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND UD2X IS NULL
AND (1=1)
2013-12-31 22:45:11,517 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:11,531 INFO [AIF]:
Processing Mappings for Column 'UD3'
2013-12-31 22:45:11,535 DEBUG [AIF]:
UPDATE TDATASEG_T
SET UD3X = '[None]'
,UD3R = 125
,UD3F = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '[None]' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND UD3X IS NULL
AND (1=1)
2013-12-31 22:45:11,870 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:11,883 INFO [AIF]:
Processing Mappings for Column 'UD4'
2013-12-31 22:45:11,887 DEBUG [AIF]:
UPDATE TDATASEG_T
SET UD4X = '[None]'
,UD4R = 128
,UD4F = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '[None]' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND UD4X IS NULL
AND (1=1)
2013-12-31 22:45:12,192 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:12,204 DEBUG [AIF]:
UPDATE TDATASEG_T
SET ATTR14 = DATAKEY
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
2013-12-31 22:45:12,739 DEBUG [AIF]:
UPDATE TDATASEG_T
SET VALID_FLAG = 'N'
WHERE 1=1
AND (
(1=0)
OR TDATASEG_T.ACCOUNTX IS NULL
OR TDATASEG_T.ENTITYX IS NULL
OR TDATASEG_T.ICPX IS NULL
OR TDATASEG_T.UD1X IS NULL
OR TDATASEG_T.UD2X IS NULL
OR TDATASEG_T.UD3X IS NULL
OR TDATASEG_T.UD4X IS NULL
AND LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND VALID_FLAG = 'Y'
2013-12-31 22:45:12,754 INFO [AIF]:
Total Data Rows available for Export to Target: 10711
2013-12-31 22:45:12,773 INFO [AIF]: COMM Update Data - Update TDATASEG_T/TDATASEGW - END
2013-12-31 22:45:12,808 INFO [AIF]: COMM End Process Detail - Update Process Detail - START
2013-12-31 22:45:12,823 DEBUG [AIF]:
UPDATE AIF_PROCESS_DETAILS
SET STATUS = 'SUCCESS'
,RECORDS_PROCESSED = CASE
WHEN RECORDS_PROCESSED IS NULL THEN 0
ELSE RECORDS_PROCESSED
END + 10711
,EXECUTION_END_TIME = CURRENT_TIMESTAMP
,LAST_UPDATED_BY = CASE
WHEN ('native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' IS NULL) THEN LAST_UPDATED_BY
ELSE 'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER'
END
,LAST_UPDATE_DATE = CURRENT_TIMESTAMP
WHERE PROCESS_ID = 300
AND ENTITY_TYPE = 'PROCESS_BAL_TRANS'
AND ENTITY_NAME = 'January 2013'
2013-12-31 22:45:12,829 INFO [AIF]: COMM End Process Detail - Update Process Detail - END
2013-12-31 22:45:12,987 INFO [AIF]: COMM Update YTD Amounts - Update YTD Amounts - START
2013-12-31 22:45:12,993 DEBUG [AIF]:
SELECT brl.PARTITIONKEY
,brl.CATKEY
,pprd.YEARTARGET
,pprd.PERIODTARGET
,pprd.SOURCE_LEDGER_ID
FROM AIF_BAL_RULE_LOADS brl
,AIF_PROCESS_PERIODS pprd
WHERE brl.LOADID = 300
AND pprd.PROCESS_ID = brl.LOADID
GROUP BY brl.PARTITIONKEY
,brl.CATKEY
,pprd.YEARTARGET
,pprd.PERIODTARGET
,pprd.SOURCE_LEDGER_ID
HAVING COUNT(*) > 1
2013-12-31 22:45:12,995 INFO [AIF]: COMM Update YTD Amounts - Update YTD Amounts - END
2013-12-31 22:45:13,052 INFO [AIF]: COMM Load TDATAMAPSEG/TDATASEG - Load TDATAMAPSEG/TDATASEG - START
2013-12-31 22:45:13,057 DEBUG [AIF]:
SELECT brl.PARTITIONKEY
,brl.CATKEY
,brl.EXECUTION_MODE
FROM AIF_BAL_RULE_LOADS brl
WHERE brl.LOADID = 300
2013-12-31 22:45:13,059 DEBUG [AIF]:
SELECT PERIODKEY
FROM AIF_APPL_LOAD_AUDIT
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND RULE_ID = 27
ORDER BY PERIODKEY
2013-12-31 22:45:13,061 INFO [AIF]:
Processing Data for PeriodKey '2013-01-01'
2013-12-31 22:45:13,065 DEBUG [AIF]:
DELETE FROM TDATAMAPSEG
WHERE PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND (
TDATAMAPTYPE = 'ERP'
OR (
TDATAMAPTYPE = 'MULTIDIM'
AND EXISTS (
SELECT 1
FROM TDATAMAPSEG parent
WHERE parent.PARTITIONKEY = TDATAMAPSEG.PARTITIONKEY
AND parent.DATAKEY = TDATAMAPSEG.TARGKEY
AND parent.CATKEY = TDATAMAPSEG.CATKEY
AND parent.PERIODKEY = TDATAMAPSEG.PERIODKEY
AND parent.TDATAMAPTYPE = 'ERP'
2013-12-31 22:45:13,074 INFO [AIF]: Number of Rows deleted from TDATAMAPSEG: 8
2013-12-31 22:45:13,077 DEBUG [AIF]:
INSERT INTO TDATAMAPSEG (
DATAKEY
,PARTITIONKEY
,CATKEY
,PERIODKEY
,DIMNAME
,SRCKEY
,SRCDESC
,TARGKEY
,WHERECLAUSETYPE
,WHERECLAUSEVALUE
,CHANGESIGN
,SEQUENCE
,VBSCRIPT
,TDATAMAPTYPE
,SYSTEM_GENERATED_FLAG
SELECT DATAKEY
,PARTITIONKEY
,4
,'2013-01-01'
,DIMNAME
,SRCKEY
,SRCDESC
,TARGKEY
,WHERECLAUSETYPE
,WHERECLAUSEVALUE
,CHANGESIGN
,SEQUENCE
,VBSCRIPT
,TDATAMAPTYPE
,SYSTEM_GENERATED_FLAG
FROM TDATAMAP_T
WHERE LOADID = 300
2013-12-31 22:45:13,081 INFO [AIF]: Number of Rows inserted into TDATAMAPSEG: 8
2013-12-31 22:45:13,083 DEBUG [AIF]:
DELETE FROM TDATASEG
WHERE LOADID < 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND RULE_ID = 27
AND PERIODKEY = '2013-01-01'
2013-12-31 22:45:15,659 INFO [AIF]: Number of Rows deleted from TDATASEG: 10711
2013-12-31 22:45:15,728 DEBUG [AIF]:
INSERT INTO TDATASEG (
DATAKEY
,PARTITIONKEY
,CATKEY
,PERIODKEY
,CURKEY
,DATAVIEW
,CALCACCTTYPE
,CHANGESIGN
,JOURNALID
,AMOUNT
,AMOUNTX
,AMOUNT_PTD
,AMOUNT_YTD
,DESC1
,DESC2
,ACCOUNT
,ACCOUNTX
,ACCOUNTR
,ACCOUNTF
,ENTITY
,ENTITYX
,ENTITYR
,ENTITYF
,ICP
,ICPX
,ICPR
,ICPF
,UD1
,UD1X
,UD1R
,UD1F
,UD2
,UD2X
,UD2R
,UD2F
,UD3
,UD3X
,UD3R
,UD3F
,UD4
,UD4X
,UD4R
,UD4F
,UD5
,UD5X
,UD5R
,UD5F
,UD6
,UD6X
,UD6R
,UD6F
,UD7
,UD7X
,UD7R
,UD7F
,UD8
,UD8X
,UD8R
,UD8F
,UD9
,UD9X
,UD9R
,UD9F
,UD10
,UD10X
,UD10R
,UD10F
,UD11
,UD11X
,UD11R
,UD11F
,UD12
,UD12X
,UD12R
,UD12F
,UD13
,UD13X
,UD13R
,UD13F
,UD14
,UD14X
,UD14R
,UD14F
,UD15
,UD15X
,UD15R
,UD15F
,UD16
,UD16X
,UD16R
,UD16F
,UD17
,UD17X
,UD17R
,UD17F
,UD18
,UD18X
,UD18R
,UD18F
,UD19
,UD19X
,UD19R
,UD19F
,UD20
,UD20X
,UD20R
,UD20F
,ATTR1
,ATTR2
,ATTR3
,ATTR4
,ATTR5
,ATTR6
,ATTR7
,ATTR8
,ATTR9
,ATTR10
,ATTR11
,ATTR12
,ATTR13
,ATTR14
,ARCHIVEID
,HASMEMOITEM
,STATICDATAKEY
,LOADID
,RULE_ID,
CODE_COMBINATION_ID
,STAT_BALANCE_FLAG
,VALID_FLAG
SELECT
DATAKEY
,PARTITIONKEY
,CATKEY
,PERIODKEY
,CURKEY
,DATAVIEW
,CALCACCTTYPE
,CHANGESIGN
,JOURNALID
,AMOUNT
,AMOUNTX
,AMOUNT_PTD
,AMOUNT_YTD
,DESC1
,DESC2
,ACCOUNT
,ACCOUNTX
,ACCOUNTR
,ACCOUNTF
,ENTITY
,ENTITYX
,ENTITYR
,ENTITYF
,ICP
,ICPX
,ICPR
,ICPF
,UD1
,UD1X
,UD1R
,UD1F
,UD2
,UD2X
,UD2R
,UD2F
,UD3
,UD3X
,UD3R
,UD3F
,UD4
,UD4X
,UD4R
,UD4F
,UD5
,UD5X
,UD5R
,UD5F
,UD6
,UD6X
,UD6R
,UD6F
,UD7
,UD7X
,UD7R
,UD7F
,UD8
,UD8X
,UD8R
,UD8F
,UD9
,UD9X
,UD9R
,UD9F
,UD10
,UD10X
,UD10R
,UD10F
,UD11
,UD11X
,UD11R
,UD11F
,UD12
,UD12X
,UD12R
,UD12F
,UD13
,UD13X
,UD13R
,UD13F
,UD14
,UD14X
,UD14R
,UD14F
,UD15
,UD15X
,UD15R
,UD15F
,UD16
,UD16X
,UD16R
,UD16F
,UD17
,UD17X
,UD17R
,UD17F
,UD18
,UD18X
,UD18R
,UD18F
,UD19
,UD19X
,UD19R
,UD19F
,UD20
,UD20X
,UD20R
,UD20F
,ATTR1
,ATTR2
,ATTR3
,ATTR4
,ATTR5
,ATTR6
,ATTR7
,ATTR8
,ATTR9
,ATTR10
,ATTR11
,ATTR12
,ATTR13
,ATTR14
,ARCHIVEID
,HASMEMOITEM
,STATICDATAKEY
,LOADID
,RULE_ID,
CODE_COMBINATION_ID
,STAT_BALANCE_FLAG
,VALID_FLAG
FROM TDATASEG_T
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
2013-12-31 22:45:16,838 INFO [AIF]: Number of Rows inserted into TDATASEG: 10711
2013-12-31 22:45:16,858 DEBUG [AIF]:
DELETE FROM TDATASEG_T
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
2013-12-31 22:45:17,123 INFO [AIF]: Number of Rows deleted from TDATASEG_T: 10711
2013-12-31 22:45:17,153 DEBUG [AIF]:
DELETE FROM TDATAMAP_T
WHERE LOADID = 300
2013-12-31 22:45:17,156 INFO [AIF]: Number of Rows deleted from TDATAMAP_T: 8
2013-12-31 22:45:17,161 INFO [AIF]: COMM Load TDATAMAPSEG/TDATASEG - Load TDATAMAPSEG/TDATASEG - END
2013-12-31 22:45:17,993 DEBUG [AIF]:
SELECT CASE app.METADATA_LOAD_METHOD
WHEN 'EPMA' THEN CASE dim.TARGET_DIMENSION_CLASS_NAME
WHEN 'Generic' THEN dim.TARGET_DIMENSION_NAME
ELSE dim.TARGET_DIMENSION_CLASS_NAME
END
ELSE dim.TARGET_DIMENSION_NAME
END TARGET_DIMENSION_NAME
,adim.BALANCE_COLUMN_NAME
FROM AIF_TARGET_APPLICATIONS app
,AIF_TARGET_APPL_DIMENSIONS adim
,AIF_DIMENSIONS dim
WHERE app.APPLICATION_ID = 26
AND adim.APPLICATION_ID = app.APPLICATION_ID
AND dim.DIMENSION_ID = adim.DIMENSION_ID
AND dim.TARGET_DIMENSION_CLASS_NAME IN ('Custom1','Custom2','Custom3','Custom4','Generic')
2013-12-31 22:45:17,997 DEBUG [AIF]:
SELECT SCENARIO "Scenario"
,YEAR "Year"
,PERIOD "Period"
,DATAVIEW "View"
,DATAVALUE "Value"
,ACCOUNT "Account"
,ENTITY "Entity"
,ICP "ICP"
,UD2 "Area"
,UD1 "Tail"
,UD3 "Special"
,UD4 "Facility"
,AMOUNT "DataValue"
FROM AIF_HS_BALANCES
WHERE LOADID = 300
2013-12-31 22:45:18,000 INFO [SimpleAsyncTaskExecutor-9]: ODI Hyperion Financial Management Adapter
2013-12-31 22:45:18,002 INFO [SimpleAsyncTaskExecutor-9]: Load task initialized.
2013-12-31 22:45:18,028 INFO [AIF]: LKM COMM Load Data into HFM - Load Data to HFM - START
2013-12-31 22:45:18,031 DEBUG [AIF]:
INSERT INTO AIF_PROCESS_DETAILS (
PROCESS_ID
,ENTITY_TYPE
,ENTITY_ID
,ENTITY_NAME
,ENTITY_NAME_ORDER
,TARGET_TABLE_NAME
,EXECUTION_START_TIME
,EXECUTION_END_TIME
,RECORDS_PROCESSED
,STATUS
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
) VALUES (
300
,'PROCESS_BAL_EXP_HFM'
,NULL
,'FMTEST2'
,NULL
,NULL
,CURRENT_TIMESTAMP
,NULL
,NULL
,'RUNNING'
,'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER'
,CURRENT_TIMESTAMP
2013-12-31 22:45:18,034 INFO [SimpleAsyncTaskExecutor-9]: Connecting to Financial Management application [FMTEST2] on [10.150.20.40] using user-name [admin].
2013-12-31 22:45:18,155 INFO [SimpleAsyncTaskExecutor-9]: Connected to Financial Management application.
2013-12-31 22:45:18,157 INFO [SimpleAsyncTaskExecutor-9]: HFM Version: 11.1.2.2.300.
2013-12-31 22:45:18,160 INFO [SimpleAsyncTaskExecutor-9]: Options for the Financial Management load task are:
<Options>
<Option name=LOG_FILE_NAME value=C:\Windows\TEMP\/aif_501_300.log/>
<Option name=IMPORT_MODE value=Replace/>
<Option name=CONSOLIDATE_ONLY value=false/>
<Option name=CONSOLIDATE_PARAMETERS value=""/>
<Option name=LOG_ENABLED value=true/>
<Option name=ACCUMULATE_WITHIN_FILE value=false/>
<Option name=DEBUG_ENABLED value=true/>
<Option name=CONSOLIDATE_AFTER_LOAD value=false/>
<Option name=FILE_CONTAINS_SHARE_DATA value=false/>
</Options>
2013-12-31 22:45:18,168 INFO [SimpleAsyncTaskExecutor-9]: Load Options validated.
2013-12-31 22:45:18,176 ERROR [SimpleAsyncTaskExecutor-9]: Error occurred during load process ORA-00904: "DATAVALUE": invalid identifier
com.hyperion.odi.common.ODIHAppException: ORA-00904: "DATAVALUE": invalid identifier
at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:216)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:175)
at org.python.core.PyObject.__call__(PyObject.java:355)
at org.python.core.PyMethod.__call__(PyMethod.java:215)
at org.python.core.PyMethod.instancemethod___call__(PyMethod.java:221)
at org.python.core.PyMethod.__call__(PyMethod.java:206)
at org.python.core.PyObject.__call__(PyObject.java:397)
at org.python.core.PyObject.__call__(PyObject.java:401)
at org.python.pycode._pyx161.f$0(<string>:98)
at org.python.pycode._pyx161.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java:165)
at org.python.core.PyCode.call(PyCode.java:18)
at org.python.core.Py.runCode(Py.java:1204)
at org.python.core.Py.exec(Py.java:1248)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:172)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1889)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$2.doAction(StartScenRequestProcessor.java:580)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:513)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$StartScenTask.doExecute(StartScenRequestProcessor.java:1066)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:724)
Caused by: java.sql.SQLSyntaxErrorException: ORA-00904: "DATAVALUE": invalid identifier
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
at oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:942)
at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1283)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1441)
at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1690)
at oracle.jdbc.driver.OracleStatementWrapper.executeQuery(OracleStatementWrapper.java:446)
at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:212)
... 38 more
2013-12-31 22:45:18,208 DEBUG [AIF]:
UPDATE AIF_PROCESS_DETAILS
SET STATUS = 'FAILED'
,RECORDS_PROCESSED = CASE
WHEN RECORDS_PROCESSED IS NULL THEN 0
ELSE RECORDS_PROCESSED
END + 0
,EXECUTION_END_TIME = CURRENT_TIMESTAMP
,LAST_UPDATED_BY = CASE
WHEN ('native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' IS NULL) THEN LAST_UPDATED_BY
ELSE 'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER'
END
,LAST_UPDATE_DATE = CURRENT_TIMESTAMP
WHERE PROCESS_ID = 300
AND ENTITY_TYPE = 'PROCESS_BAL_EXP_HFM'
AND ENTITY_NAME = 'FMTEST2'
2013-12-31 22:45:18,210 FATAL [AIF]: Error in LKM CThe issue is that you are mapping "Data Value" to amount in the Target Application import format:
SELECT SCENARIO "Scenario"
,YEAR "Year"
,PERIOD "Period"
,DATAVIEW "View"
,DATAVALUE "Value"
,ACCOUNT "Account"
,ENTITY "Entity"
,ICP "ICP"
,UD2 "Area"
,UD1 "Tail"
,UD3 "Special"
,UD4 "Facility"
,AMOUNT "DataValue"
FROM AIF_HS_BALANCES
WHERE LOADID = 300
You need to map AMOUNT to "AMOUNT" in the HFM Application. Check that the dimension mapping is correct for the class in the target application and that your import format is going to the proper target dimension(Amount). -
Error while Loading data through .csv file
Hi,
I am getting below date error when loading data through into Olap tables through .csv file.
Data stored in .csv is 20071113121100.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TE_7007 Transformation Evaluation Error [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')]
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11132 Transformation [Exp_FILE_CHNL_TYPE] had an error evaluating output column [CREATED_ON_DT_OUT]. Error message is [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')].
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11019 There is an error in the port [CREATED_ON_DT_OUT]: The default value for the port is set to: ERROR(<<Expression Error>> [ERROR]: transformation error
... nl:ERROR(u:'transformation error')).
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11021 An error occurred moving data from the transformation Exp_FILE_CHNL_TYPE: to the transformation W_CHNL_TYPE_DS.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> CMN_1086 Exp_FILE_CHNL_TYPE: Number of errors exceeded threshold [1].
Any help is greatly appreciated.
Thanks,
Poojak1) Wrong format, you wont get much support loading OLAP cubes in here I think.
2) Has your CSV file been anywhere near excel by chance the conversion of 20071113121100 to 2.00711E+13 looks very much like what I see when Excel has an invalid number mask / precision specified for a cell.
*** We are using EBS. File was already generated by consultants through SQL query. Getting error while loading though Informatica. Target table is setup as date datatype and source is String(19).
Expression in Informatica is setup as below.
IIF(ISNULL(CREATED_ON_DT), NULL, TO_DATE(CREATED_ON_DT, 'YYYYMMDDHH24MISS'))
Thanks,
Poojak -
Awk: error while loading shared libraries: libdl.so.2: cannot open shared
I got the following error
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
hostname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.4681/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
Tuxedo 9.1 base installation complete
when tried to install Tuxedo 9.1 on unbreakable Linux 5. I am trying to install Peoplesoft.
I found this error is pretty common, not necessary appear when installing Tuxedo. I am searching around and a lot of people saying to comment out the line
export LD_ASSUME_KERNEL
The problem is I don't know which in which file I need to do it. Has anyone have the encountered the similar problem before? Thanks.After reading the installation script, I figure out which is the evil file. I just post it here so if someone get into this problem in the future, he can fix it.
Here is the solution:
Assume you are at the directory where the install.sh is. Do the following:
-bash-3.1$ cd linux/sles9/base
-bash-3.1$ cp tuxedo91_32_SLES_9_x86.bin tuxedo91_32_SLES_9_x86.bin.bak
-bash-3.1$ cat tuxedo91_32_SLES_9_x86.bin.bak | sed "s/export LD_ASSUME_KERNEL/#xport LD_ASSUME_KERNEL/" >tuxedo91_32_SLES_9_x86.bin
-bash: tuxedo91_32_SLES_9_x86.bin: Permission denied
-bash-3.1$ cat tuxedo91_32_SLES_9_x86.bin.bak | sed "s/export LD_ASSUME_KERNEL/#xport LD_ASSUME_KERNEL/" >tuxedo91_32_SLES_9_x86.bin
Then run the installation script
sh install.sh and be happy as I am now!!!!
Maybe you are looking for
-
I'm trying to use the PDF and am having problems.
I'm trying to use the PDF but I'm ever problems.
-
Need help finding information about a photo taken on my iphone, date, gps
I took a photo a few months ago and I still have the photo on my phone, I need to find out the date, time and GPS coords of the photo, I had an app a long while back that would do this and I am pretty sure its free but I have no idea what it was call
-
Is there anyway to setup the Thunderbolt now with ICS with no Skins or Wallpaper? On Gingerbread you were able to do that but now I am stuck with 3 skins, HTC (annoying), Blue Sky (OK) and Burgundy (which turns all indicators red ). Any answer would
-
An unknown error occured (-208)
Hi, I am having problems using my iTunes on my iMac G4 to preview songs on Music Store as well as accessing songs I purchased before. Whenever I tried to do that, iTunes always asked me to enter my Apple ID and once I did that, I got the following me
-
Hello everybody, Running a DAQ VI (even examples) on a PDA with the CF-6004 card, I get the error message: Error 15. Can you tell me what it means and how to solve it. Thanks very much. François and Ximun