Error while loading JS libraries for UI5 and I5 Grid together

Hello Experts,
I am trying to load JavaScript libaries for UI5 (OpenUI5 SDK) and I5 Grid (from bootstrap.js).
My requirement is to create UI5 as well as I5 Chart/Grid components in the IRPT pages.
Development environment is MII 14.0 sp04 .
I have added a JS link for my UI5 library as follows, in my IRPT page.
<script src="/XMII/CM/DCMS_Master/UI5Library-1.22.8/resources/sap-ui-core.js"
id="sap-ui-bootstrap"
data-sap-ui-libs="sap.m, sap.ui.table, sap.ui.commons"
data-sap-ui-theme="sap_bluecrystal">
<script>
   sap.ui.localResources("/XMII/CM/DCMS_Master/UI5Library-1.22.8/resources");
</script>
Afer this Include, I have loaded the I5 component JS library like this:
<SCRIPT type="text/javascript" src="/XMII/JavaScript/bootstrap.js" data-libs="i5Chart,i5Grid"></SCRIPT>
However, I get an error on the console as follows
Failed to load resource: the server responded with a status of 404 (Not Found)
<MII Server Host>:50000/XMII/CM/DCMS_Master/UI5Library-1.22.8/resources/JSONListBinding.js
Uncaught Error: found in negative cache: 'sap/ui/model/json/JSONModel.js' from /XMII/CM/DCMS_Master/UI5Library-1.22.8/resources/sap/ui/core/library-preload.json/sap/ui/model/json/JSONModel.js: Error: failed to load 'JSONListBinding.js' from /XMII/CM/DCMS_Master/UI5Library-1.22.8/resources/JSONListBinding.js: 404 - Not Found                                    sap-ui-core.js:80
Uncaught Error: "Element sap.ui.commons.layout.MatrixLayout#matrix4" is not valid for aggregation "content" of ManagedObject sap.ui.core.UIArea#headerSelection                                                                                                                         sap-ui-core.js:134
Does that mean that I5 JS libs and UI5 libs cannot be imported together?
Any help will be appreciated.
Best,
Arihant Kothari

Hi Arihant,
The i5component JS library internally loads the SAP UI5 library that you are trying to load explicitly. If you intend to use both MII i5 components and SAP UI5 components together then you can just use the following:
<SCRIPT type="text/javascript" src="/XMII/JavaScript/bootstrap.js" data-libs="i5Chart,i5Grid"></SCRIPT>
And for sure you would have deployed SAP UI5 library on your MII server right.. ? In that case you load the UI5 library with the following script tag:
<script src="/sapui5/resources/sap-ui-core.js" id="sap-ui-bootstrap"data-sap-ui-libs="sap.m, sap.ui.table, sap.ui.commons" data-sap-ui-theme="sap_bluecrystal">
<script>
In case you choose to use only SAP UI5 components/controls then you can use only the above script tag so that the MII i5 components don't get loaded.
To check if SAP UI5 is deployed on your server you can try to access the following link:
http|s://<host>:<port>//sapui5/resources/sap-ui-core.js
And to check the SAP UI5 version you can type the following in browser console: sap.ui.version
Hope this helps!
Thanks and Best Regards,
Ria

Similar Messages

Error 0(Native: listNetInterfaces:[3]) and error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory

Hi Gurus,
I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
OS: OEL5 32 bit
oifcfg iflist
eth0 192.168.2.0
eth1 10.0.0.0
oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth1 10.1.1.0 global cluster_interconnect
eth0 192.168.2.0 global public
cat /etc/hosts
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
My questions are:
should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
Edited by: ayyappa on Aug 20, 2009 10:13 AM
Edited by: ayyappa on Aug 20, 2009 10:14 AM
Edited by: ayyappa on Aug 20, 2009 10:15 AM

a step forward towards resolution but i need some help from the gurus.
root# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
root# /u01/app/oracle/product/crs/bin/oifcfg iflist
eth1 10.0.0.0
eth0 192.168.2.0
root# /u01/app/oracle/product/crs/bin/oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth0 191.168.2.0 global public
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
****ORACLE_HOME environment variable not set!
ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
root# export ORACLE_BASE=/u01/app/oracle
root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
root# export PATH=$PATH:$ORACLE_HOME/bin
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP does not exist.
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
My questions to the gurus are as follows:
Should ping on vip work? It does not work now.
srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
VIP is not running on node: sunny1pub
GSD is not running on node: sunny1pub
PRKO-2016 : Error in checking condition of listener on node: sunny1pub
ONS daemon is not running on node: sunny1pub
[root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
Name Type Target State Host
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed.

While booting linux VM getting error "error while loading shared libraries

Hi Expert,
while booting Oracle linux Virtual Machine getting error "error while loading shared libraries: libpopt.so.0 cannot open shared object file" no such file or directory
Now i am unable to boot linux, any help appreciated.
Note: Its Oracle Linux 5.8 x86_64 under Oracle VirtualBox
Edited by: IgnitedMind on Apr 30, 2013 7:12 AM
Edited by: IgnitedMind on May 1, 2013 12:04 AM
Edited by: IgnitedMind on May 1, 2013 12:06 AM

Without knowing what you have installed or what modifications you have done it is not possible to say what goes wrong. Like I previously mentioned, you may have installed an incompatible version of a core system library. Sorry, I'm not going to read any installation manual to find out what you might have done wrong. You may need to reinstall the complete system or just the popt installation package.
Based on my experience people sometimes seem to misunderstanding the concept of software version requirements, which are always minimum version requirements and does not mean, for instance, software made for gcc 4.1.10 does not work under 4.1.12. You cannot simply upgrade or downgrade core system libraries without affecting the installed system. Using YUM to install software will check this and prevent you from breaking your system. RPM does not check any dependencies and hence can break your system beyond repair.

Oracleorcl: error while loading shared libraries: libaio.so.1: cannot open

Hi,
I installed Oracle 10g on RHLinux AS4. I created a initOEMREP.ora file
in $ORACLE_HOME/dbs.
my .bash_profile file is,
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
unset USERNAME
#Added on 05-feb-2008
#For oracle1g db installation
export ORACLE_SID=OEMREP
export ORACLE_BASE=/home/app/oracle10gdb
export ORACLE_HOME=$ORACLE_BASE/product/10.2.0/db_1
export PATH=$ORACLE_HOME/bin:$PATH:.
export LD_LIBRARY_KERNEL=$ORACLE_HOME/lib
export TNS_ADMIN=$ORACLE_HOME/network/admin
export TMP=/home/tmp
export TMPDIR=/home/tmp
While
$sqlplus "/as sysdba"
I am getting
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Feb 6 21:27:08 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
oracleorcl: error while loading shared libraries: libaio.so.1: cannot open shared object file: No such file or directory
ERROR:
ORA-12547: TNS:lost contact
Please help me to solve this.
Regards,
Mathew

Hi,
THank you for the replay. Where will I get this package?
Regards,
Mathew.

Sqlplus: Error while loading shared libraries: libsqlplus.so:

Hi
The Error is as follows:
sqlplus: Error while loading shared libraries: libsqlplus.so: cannot open shared object file: no such file or directory
Installed R12 with RUP2.
User Oracle already exists.
I tried to create a user appsdev as follows:
#adduser appsdev
#passwd appsdev
#cd /home
#chmod 500 appsdev
login as user appsdev/appsdev
run the env file from $ORACLE_HOME
$sqlplus
sqlplus: Error while loading shared libraries: libsqlplus.so: cannot open shared object file: no such file or directory
if run the env file and sqlplus from user ORACLE.i don't get the error.
but from the appsdev user i get the error.
what should i do to execute sqlplus successfully from appsdev user.
regards,
charan

if run the env file and sqlplus from user ORACLE.i don't get the error.
but from the appsdev user i get the error.Is the "appsdev" user the owner of the application tier? If so, source the env file under %APPL_TOP% and check then.
Did you specify the dba group as the primary group for "appsdev" user?

Svcadm: error while loading shared libraries: libz.so.1: cannot open shared

Ops center 12c installation last stage we are getting below error :
INFO: starting new satellite SMF services
satadm: Enable HTML redirect
satadm: Disabling application/scn/ec-server-splashpage
/opt/sun/xvmoc/bin/svcadm: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
satadm: ERROR: application/scn/ec-server-splashpage failed to stop
satadm: Starting Enterprise Controller with SMFlite...
svcadm: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
satadm: ERROR: Error enabling Enterprise Controller run-time milestone svc:/application/scn/satellite-enable:default (rc=127)
Error: starting satellite services
Command: /opt/sun/xvmoc/bin/satadm start -v -w
Exit code: 1
Output:
Please fix the problem and then try this step again.
For a full log of the failed install see the file: /var/tmp/installer.log.14112.
t. Try this step again (correct the failure before proceeding)
x. Exit

Hi Valentin
The copy error occurs when you try to copy the files to the main OS that has allocated the VM ?
Because another option is to get those files toward the VM across and ftp server. You could use
an ftp server installed in the main machine or in the network where you are connected o inclusive from
your mail if you have connection to internet.
Joel Perez
Oracle Ace Member
DBA Oracle

Error while loading shared libraries: libpng12.so.0

Am trying to install Rockbox installer. After running the app, I get the following error:
error while loading shared libraries: libpng12.so.0: cannot open shared object file: No such file or directory
I have already installed libpng12 earlier this month for another application through AUR and that worked fine.
Where do I start?
thanks

RockBox is an aur package? Does the aur package compile it from source? If it does, you should just be able to recompile. If its doing something funny and trying to download a prebuilt binary you may be out of luck on that one. The libpng12 package from AUR is installed on your system?

Error while loading shared libraries after installing cleartype fonts.

Hi there.!
Since the default fonts of Arch looked quite ugly on my LCD, I read the Fonts wiki and installed cleartype packages from AUR.But now, when I try switching to runlevel 5 (I use GDM by the way), it throws up following error:
/usr/sbin/gdm-binary: error while loading shared libraries: libcairo.so.2 : cannot open shared object file: No such file or directory.
I didn't edit the pkgbuilds in any way.Running "locate libcairo.so" doesn't show up anything either.
Any help guys.?

Well you have two choices, use windows XP or google for 'fonts linux ugly'
or there is a search feature on this forum, it works well.
setting a right DPI will probably make your fonts look the best no matter what packages you install or ~/.fonts file you use.
Last edited by jacko (2009-01-10 12:32:54)

Error while loading shared libraries: /usr/lib/libwebkitgtk-1.0.so.0

So, I have a sligtly old computer that I use web browsers like midori on, because they are good for slow computers. Whenever I launch dwb or midori or luakit from the launcher in the Gnome shell, nothing happends. When launching from the terminal (dwb here, it happens for all three) I get:
dwb: error while loading shared libraries: /usr/lib/libwebkitgtk-1.0.so.0: file too short
and when installing packages I get:
ldconfig: File /usr/lib/libjavascriptcoregtk-1.0.so is empty, not checked.
ldconfig: File /usr/lib/libjavascriptcoregtk-1.0.so.0.16.10 is empty, not checked.
ldconfig: File /usr/lib/libtotem.so.0 is empty, not checked.
ldconfig: File /usr/lib/libxvidcore.so.4.3 is empty, not checked.
ldconfig: File /usr/lib/libwebkitgtk-1.0.so.0.22.8 is empty, not checked.
ldconfig: File /usr/lib/libjavascriptcoregtk-1.0.so.0 is empty, not checked.
ldconfig: File /usr/lib/libxvidcore.so is empty, not checked.
ldconfig: File /usr/lib/libxvidcore.so.4 is empty, not checked.
ldconfig: File /usr/lib/libtotem.so.0.0.0 is empty, not checked.
ldconfig: File /usr/lib/libwebkitgtk-1.0.so.0 is empty, not checked.
ldconfig: File /usr/lib/libtotem.so is empty, not checked.
ldconfig: File /usr/lib/libwebkitgtk-1.0.so is empty, not checked.
The package installs, and then this prints out.
What can I do to fix it?
Note: this happened after a system update
Last edited by dubble (2014-06-04 20:42:09)

Alright, I read the thread and preformed
sudo pacman -Syyf <all packages updated>
but the option wasn't found (-f)
so i did
sudo pacman -Syyu <all packages updated>
and it spit out several hundered lines consisting of:
webkitgtk2: /usr/share/webkitgtk-1.0/images/panIcon.png exists in filesystem
except with different packages and files
help?

Error while loading shared libraries: libopenal.so.0: ...

Hello
While starting a few games(for example Spring and Tremolous) I get the following error:
error while loading shared libraries: libopenal.so.0: cannot open shared object file: No such file or directory
and the start interrupts. How to start these games?

skottish wrote:
eldragon wrote:
skottish wrote:Does tremulous build off of the source code? If so, rebuild it against the newer openal. Symlinking libraries is a very bad idea.
could you explain further? there must be something im missing
The best way to do it in my opinion is to grab the tremulous build files using ABS:
http://wiki.archlinux.org/index.php/ABS
Once abs is installed and run, the tremulous file will be located in /var/abs/community/games/tremulous. Copy the tremulous folder to somewhere where you have write permissions, enter the directory, change pkgrel=4 to pkgrel=5 in the PKGBUILD, and run makepkg. If all goes well you'll have a new package in that directory after it's done compiling. Then you can install it by running 'pacman -U <whatever the file that ends in .pkg.tar.gz>.
i was talking about the dangers of symlinking libraries actually...

Error while loading shared libraries: libglut.so.3: cannot open shared

Hi, I bought the new Humble Bundle today and downloaded the tar.gz file for Fieldrunners (which is supposed to work under linux)
"error while loading shared libraries: libglut.so.3: cannot open shared object file: No such file or directory" is the message I get when I put ./Fieldrunners into konsole after copying the fieldrunners folder into /opt
I have freeglut-2.8.0-1 installed
This is the README:
This is Fieldrunners for Linux.
It was built under Ubuntu 12.04 but is known to work in other distros.
The only external dependancy is the freeglut3 library.
To install:
copy the fieldrunners directory (executable and game assets) to /opt
copy the .fieldrunners directory (user options, achievements and saves) to your home directory.
If you don't want to copy the fieldrunners directory to /opt, you can likely start fieldrunners from any folder and it will attempt to find the assets in the same folder as the executable.
The executable /opt/fieldrunners/Fieldrunners will create the .fieldrunners directory in the home directory if not found.
EDIT: Forgot to mention, there is no PKGBUILD file in the tar.gz
Last edited by harsha (2012-08-15 23:43:19)

My Fieldrunners says:
cannot open audio device (Device or resource busy)
Fieldrunners: pcm.c:928: snd_pcm_state: Assertion `pcm' failed.
... so I have to kill pulseaudio first (or use padsp). After that (with alsa), it has choppy sound. 1 second sound, one pause...
Spacechem is windows binary + a wine'ish blob (that just freezes on my machine), comes only as rpm/deb and seems to insist to be installed in /opt (AND some files in /usr/share). The included .exe doesn't work with native wine either (without further adjustments at least).
Doesn't really look good at all so far, this bundle.
edit:
Also: Uplink seems to be unplayable on a big resolution Display without workarounds due to its small font...?
Spirits says:
(Spirits-64:14143): Gtk-WARNING **: Error loading theme icon 'image-missing' for stock: Fatal error reading PNG image file: Incompatible libpng version in application and library
... but seems to work fine at a first glance (safe for a missing picture in the launcher which isn't really tragic).
edit:
( Aaaand, now I notice I'm in the wrong thread and/or forum. Where did that generic "is the bundle working?"-thread go? Stupid multi-tabbing xD )
Last edited by whoops (2012-08-16 20:47:17)

Error while loading shared libraries: libtasn1.so.3: cannot open share

Hello,
I have done an update to the system today and now I see the following error:
emacs: error while loading shared libraries: libtasn1.so.3: cannot open shared object file: No such file or directory
same happens if I try to open epiphany.
I have:
extra/libtasn1 3.0-1 [installed]
I tried to reinstall it, but there is no effect. Any idea what I can do to fix this?
Thanks!

looking at the file list, libtasn1 3.0-1 comes with libtasn1.so.6. The packages that depend on it will need to be rebuilt for the soname bump. If you're sure that you're completely up to date, file a bug report. If you got the versions of the programs you're using from the AUR, rebuild them yourself.
Last edited by Scimmia (2012-11-05 14:34:01)

Error while loading shared libraries: libgnutls.so.30

after today's update,whenever i start kodi or mplayer, reporting:
error while loading shared libraries: libgnutls.so.30: cannot open shared object file: No such file or directory
and i checked /lib ,there is only libgnutls.so.28, and a soft link to libgnutls.so.30 not work.
Last edited by frat (2015-04-19 14:22:29)

Stevearch wrote:Can i ask how you knew to do that? Just so i know for if this problem happens in the future.
Sigh.
jasonwryan wrote:Rebuilding AUR packages is your responsibility...
Mr.Elendig wrote:It is really simple: Just rebuild anything that links against the old gnutls.
And, despite JWRs warning this thread seems to perpetually draw hijackers for unrelated AUR issues.
Closed. The original issue is long since resolved. (frat, if you feel otherwise and wish to reopen your thread, please let me know and I'll excise all the unrelated cruft that's collected)

Error while loading shared libraries: libg2c.so.0

I just installed g77 and compiled some program I wrote for a computaional physics class. They also compile / run fine with xlf90 and xlf95 on a mac.
But here, on my intel box I get this error:
[ryan@dogma Desktop]$ ./a.out
./a.out: error while loading shared libraries: libg2c.so.0: cannot map zero-fill pages: Cannot allocate memory
I know there is plenty of RAM available too.
Any ideas?

Check for Task #2299 — gcc-g77 creates "bad" executables in the bugtracker. The maintainer has posted a gcc-g77 package to test. I will test it tonight but another user said that it corrected a problem with octave about the libg2c.so.0 library.

Error while loading shared libraries: libxerces-c.so.26: cannot open shared

Hi,
I'm trying to install SRM-MDM Catalog 2.0 under SUSE_LINUX Enterprise Server 10 (x86_64).
First to all I'm trying to install Server part. So I navigate under the CD installation: /Master_Data_Server/LINUX_X64/MDM/bin/ and then execute ./mds-r.
The following error appears: error while loading shared libraries: libxerces-c.so.26: cannot open shared object file: No such file or directory.
libxerces-c.so.26 is located under /Master_Data_Server/LINUX_X64/MDM/lib/
Could you please help me?
Thanks in advance!

Thanks for your comment Shiv, Yes I know that MDM 5.5 is out of standard maintainence but anyway our business scenario requires SRM-MDM 2.0.
If anyone finds the same error I mentioned, It has been solved using ldconfig -v in the library directory of choice.
I'd like to ask another issue: Right now We have the following error after executing ./mdis-r or ./mds-r:
Could not open language resource file "LangStrings/ImportManagerCommon.lang". Try setting the MDM_HOME environment variable.
Could you please help me how to do if?
Thanks in advance,
Edited by: Guillermo Montes on May 5, 2010 4:21 PM
Edited by: Guillermo Montes on May 5, 2010 4:22 PM

Error while loading JS libraries for UI5 and I5 Grid together

Similar Messages

Maybe you are looking for