Error while loading the delta to ODS

Hi,
I have an urgent situation.
I am loading 500,000 records to my ODS with Delta request. All of them came to PSA and first 112,000 records got loaded and activated in ODS. Now, the request stays in yellow status. Other records have not loaded from PSA to ODS. How do I load rest of the records from PSA to ODS ?. Also, how do I handle Yellow request which is still waiting.
Also, is there anyway to load 500,000 records in parallel ?.
Thanks for your help.
Message was edited by:
        Ketan Doshi

Go to the load monitor in RSA1 or RSMON and analyse the reasons.
Go to the tab details and you will get some step by step. Also, you will see the update status for each data package. This will give you some clues.
Also, the request will turn red once the preset time has elapsed for the info package. If not, you can turn it green or red. I suggest you delete the entire data.
Look at the data selections in the info package and try to send smaller set of data and do it sequentially. The job is not getting compleetd now, possibly because there are some locking issues also.
Also, ensure, you load all the master data before laoding the transaction data to the ODS.
Ravi Thothadri

Similar Messages

  • Error while loading the data from ODS to InfoCube

    hai
    Im trying to load the data from ODS to InfoCube for particular year .
    But it says that there is a source system problem .
    why it is like that .
    pls tell me
    i ll assing the points
    rizwan

    Hi Rizwan,
    you didn't mention the error message in details. there could be a few places to be checked:
    - check if BW itself source system is active and in tact and reactivate if necessary
    - check if update rule is active and reactivate if necessary
    - check if ODS is active and reactivate if necessary
    Regards,
    Lilly

  • Error while resetting the delta in ODS  (BI 7.0)

    Hi all,
    I face a problem in delta resetting...need your help... Thanks..
    I have an ODS-1  which has target cube1, cube2, cube3....One week back a new target has been added as ODS-2....All complete data from ODS1  has been piped into ODS 2..(Note.. ODS2 has many more inputs from other cubes/ODS too)
    NO issues till now....
    I found a data problem in ODS-1 which got loaded 15 days back..... I have removed all 15 requests from cube1, cube2 and cube3... Now I am trying to reset the delta in ODS1...
    I am getting the following error....Infoprovide ODS2 still contains request... Delete this first....
    Since ODS2 has many other data alongwith ODS1... If I try deleting request from ODS2,, I need to clean it totally and redo... I dont want to do this...
    Is there any way to disconnect this delta link between ODS1 - ODS2..... So that I will reload the data in ODS1 and populate into all targets...
    Let me know your suggestions.... Thanks!
    Regards
    Ayyappan.V

    Is there any way to disconnect this delta link between ODS1 - ODS2..... So that I will reload the data in ODS1 and populate into all targets...
    I dont think you can disconnect the link. just delete the requests originating from ODS1 in ODS2 and you can leave all other requests intact that are from other dataproviders and do a reinit.

  • Getting Duplicate data Records error while loading the Master data.

    Hi All,
    We are getting Duplicate data Records error while loading the Profit centre Master data. Master data contains time dependent attributes.
    the load is direct update. So i made it red and tried to reloaded from PSA even though it is throwing same error.
    I checked in PSA. Showing red which records have same Profit centre.
    Could any one give us any suggestions to resolve the issues please.
    Thanks & Regards,
    Raju

    Hi Raju,
            I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since  time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
    Hope this helps you.
    Thanks & Regards,
    Nithin Reddy.

  • Error while loading the planning book

    Hi There,
    I am getitng the below error while loading the data in planning book
    "Error for COM routine using application program (return code 40,016)
    Error reading data - Planning book cannot be processed further"
    Ran  /SAPAPO/TS_LCM_CONS_CHECK and /SAPAPO/TS_LCM_REORG but its not working , still getting the same error.
    Could you please advise?
    Thanks,
    Krishna

    Hi Krishna,
    Looks like a key figure might be incorrectly created or there might be a problem in aggregation/disaggregation of key figures due to numerous number of CVCs.
    Regards
    JB

  • Error while Loading the WSDL

    Hi,
    Getting error while loading the WSDL in Browser.Mentioned below is the link which trying to load.
    http://10.162.32.113/DNBDAASEXCMDL4/AdapterProductService?wsdl
    The XML page cannot be displayed
    Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
    A string literal was not closed. Error processing resource 'http://10.162.32.113/DNBDAASEXCMDL4/AdapterProductService?wsdl'...
    <xs:element name="POST_CODE" type="a
    Please can any one help on this.

    That's no problem with the wsdl, it's the browser that's not able to show the xml, try on firefox or try using "show page source"...

  • Error while loading the data from PSA to Data Target

    Hi to all,
         I'm spacing some error while loading the data to data target.
    Error :  Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
    Details:
    Requests (messages): Everything OK
    Extraction (messages): Everything OK
    Transfer (IDocs and TRFC): Errors occurred
          Request IDoc : Application document posted
          Info IDoc 2 : Application document posted
          Info IDoc 1 : Application document posted
          Info IDoc 4 : Application document posted
          Info IDoc 3 : Application document posted
          Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
    Processing (data packet): Errors occurred
          Update PSA ( 2462  Records posted ) : No errors
          Transfer Rules ( 2462  -> 2462  Records ) : No errors
          Update rules ( 2462  -> 2462  Records ) : No errors
          Update ( 0 new / 0 changed ) : Errors occurred
          Processing end : Errors occurred
    I'm totally new to this issue. please help to solve this error.
    Regards,
    Saran

    Hi,
    I think you are facing an invalid character issue.
    This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
    I will add the step by step procedure to edit PSA data and update into target (request based).
    In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
    Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
    Identifying incorrect records.
    System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
    1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
    2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
    3. Then you can go to PSA and filter using the incorrect records based on the particular field.
    4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
    If you want to confirm find the PSA table and search manually."
    Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
    Steps to resolve this
    1. Force the request to red in RSMO > Status tab.
    2. Delete the request from target.
    3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
    4.Edit the record
    5. Save PSA data.
    6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
    Refer how to Modify PSA Data
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
    This should solve your problem for now.
    As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
    RSKC --> type ALL_CAPITAL --> F8 (Execute)
    OR
    Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
    Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
    Refer
    /people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
    /people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
    /people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
    http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
    For adding Other characters
    OSS note #173241 – “Allowed characters in the BW System”
    Thanks,
    JituK
    Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

  • Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")

    I activated all 0* objects in BTMP  and checked that they are all activated, but I found errors when opening the BEx Web Analyzer
    Error messages :
    Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")
    ERROR: Command type SWITCH_AXES of object not recognized
    ERROR: Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
    So I ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version D report to check and choose validate.
    Error messages :
    Template Include Item HEADER_TEMPLATE unresolved or empty. Close and reopen template.     
    Template Include Item FOOTER_TEMPLATE unresolved or empty. Close and reopen template.          
    Width of object item:GROUP_ITEM:GROUP_ITEM_1 is very small (1amp;1)          
    Query  does not exist in the BI System (Object QU )
    Cannot instantiate data provider
    I also ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version A and got the following errors:
    Command type SWITCH_AXES of object  not recognized
    Command type SWITCH_AXES of object  not recognized
    Command type SWITCH_AXES of object  not recognized
    Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
    Parameter GENERAL_TEXT_ELEMENT of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
    Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
    Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
    Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
    Command SWITCH_AXES cannot be located in parameter ACTION
    Command SWITCH_AXES cannot be located in parameter ACTION
    Command SWITCH_AXES cannot be located in parameter ACTION
    Parameter GENERIC_TEXT_BINDING of object item:GROUP_ITEM:GROUP_ITEM_1 cannot be higher-level node of GENERAL_TEXT_ELEMENT
    Item item:GROUP_ITEM:GROUP_ITEM_1 of type DROPDOWN_ITEM cannot be a parent node of DATA_PROVIDER_REF
    Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of VISIBLE
    Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_POSITION
    Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_VISIBLE
    Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_ONLY
    Invalid parameter value  for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
    Invalid parameter value  for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
    Invalid parameter value  for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
    bi-Tag bi:item has unknown attribute key. Please check your spelling
    bi-Tag bi:item has unknown attribute key. Please check your spelling
    bi-Tag bi:item has unknown attribute key. Please check your spelling
    bi-Tag bi:item has unknown attribute key. Please check your spelling
    What could be the problem?

    hi,
      Please look into this note let me it helps...url=https://websmp202.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=917950&_NLANG=E]Note 917950 - SAP NetWeaver 2004s: Setting Up BEx Web[/url]
    check this link as well for [<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ca6de811-0c01-0010-43b2-c64584eef943">Bex Web Configuration</a>
    wht is the SP Level?
    Nagesh Ganisetti.

  • Error while loading the WSLD file

    Hi all
    I am trying to consume a Webservice. When i try to create the Model out of the WSDL file, it says "Error while loading the WSDL file".
    Its an XI webservice, so i cannot view it from Webservice navigator.
    How could i find out that, the problem is with the Webservice or i am missing any thing
    Kindly help
    regards
    Deepu

    Hi
    I checked the log and i am getting the following exceptions
    1.DynamicProxy.TempDir=C:\DOCUME1\DEEPUM1\LOCALS~1\Temp\, DynamicProxy.INetProxy.Host=}'
         at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:413)
    Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.WebserviceClientException: GenericServiceFactory initialization problem. Could not load web service model.
    2. Caused by: com.sap.engine.lib.xml.util.NestedException: IO Exception occurred while parsing file:Invalid Response Code: (401) Unauthorized. The requested URL was:"http://Pinnacle:50000/XISOAPAdapter/MessageServlet?channel=:PowerEP_BusService:Out_SOAP_DocViewDownload" -> com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL
    3. java.lang.NullPointerException
         at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DOperationImpl.initParameters_DocumentStyle(DOperationImpl.java:59)
    Is this any authorization problem
    regards
    Deepu

  • Using FF to access my AOL emails I get "There was an error while loading the message. Please try again later." Access is OK via Chrome, IE & AOL's own desktop.

    "There was an error while loading the message. Please try again later." is a recent (3/4 days) error message I get when accessing my AOL emails. I can access the page and move them between states but cannot open them to read. Chrome, IE and AOL's own desktop open emails OK & can access them from the wife's PC using my AOL details. Have cleaned the history tab of everything in FF, have also removed it with add/rem progs and reinstalled - still I get the above message.
    PC - W7 Pro 64 bit, 16GB RAM etc.

    Hello,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!
    Thank you.
    <!-- VERY important to include-->
    <b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>

  • Error while loading the runtime repository via HTTP

    Hi Experts,
    I am trying to delete an enhancement and when I enter the component name and the enhancement set in BSP_WD_CMPWB. I get the following error when right click the enhanced view and select delete : Error while loading the runtime repository via HTTP. How do I delete this enhancement?
    Regards
    Abdullah Ismail.

    if for some reason the runtime repository is not coherent, you get an error each time you try to read it (and this is the case when you open a component using the transaction BSP_WD_CMPWB)
    this is because the XML file is interpreted by a CALL TRANSFORMATION statement, and any incorrect node will raise an uncaught exception
    solution:
    enhanced view is contained into BSP application you have created the first time you enhanced the component
    go to SE80 and enter the BSP application where your objects are stored (the name you provided the first time)
    there you can modify directly the objects, including the runtime repository which is stored under node "Pages with flow Logic"
    once the correction is done, you can access again your component through transaction BSP_WD_CMPWB (and delete it properly if this is what you want to do)

  • There was an error while loading the message. Please try again later. get this when trying to open emails

    from today only when i try to open my emails i get the following message
    There was an error while loading the message. Please try again later.
    I did a restore earlier and not worked since then i ues Aol but have never had a problem before someone please help

    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!

  • Records was deleted at R/3 sys - getting error while loading the data

    Hi All,
    we are extracting the data from 2LIS_12_VCITM, 2LIS_11_VASCL, 2LIS_11_V_ITM, 2LIS_13_VDITM and 2LIS_11_VAITM into Cube RSD_C03. But one record (Sales Order) was deleted at R/3 system so we getting the error message that Caller 09 contains an error message while loading the data from 2LIS_12_VCITM.
    we have replicate the DataSource and activate Trans rules but no use still getting the same error.
    when we execute the data source  2LIS_12_VCITM at RSA3 with update mode as D (Transfer of the deltas since the last request)getting error message that Errors occurred during the extraction
    and we are getting the zero records at RSA3 for the 2LIS_12_VCITM as update mode as F (Transfer of all requested data)
    And getting shot dump that TSV_TNEW_PAGE_ALLOC_FAILED at BW side.
    Could you kindly suggest me any one how to rectify this error.
    Thanks in Advance,
    Shaliny. M

    hai Lilly
    I activated myself source system  and replicate the my datasource .
    Then activate the update rules for ODS , InfoCube and InfoCube .
    Then i tried to load the data into InfoCube from ODs .
    Again im getting same problem .
    why it is like that
    pls tell me
    rizwan

  • Error while loading data from one ODS to anther ODS

    Hi all,
    while loading the data from one ODS to another ODS, we are getting error message - Error: No match found in target. No Space on ODS.
    I have done a runstat on these tables of the ODS.. but the issue repeated.
    Can anyone tell how do we solve this issue.

    Check if you get any other Dump message in ST22 to see if it is due to some space availability in the DSO or underlying tables.
    Or Post in detail if any other errore message is available.

  • Error while loading the data from text file

    Hi,
    I got an error " Data Value Encountered before all Dimensions selected" while loading the data from the text file.
    Can any one please suggest me the solution.

    Possible Solutions
    Make sure that the data source is valid.
    Is a member from each dimension specified correctly in the data source or rules file?
    Is the numeric data field at the end of the record? If not, move the numeric data field in the data source or move the numeric data field in the rules file.
    Are all members that might contain numbers (such as "100") enclosed in quotation marks in the data source?
    If you are using a header, is the header set up correctly? Remember that you can add missing dimension names to the header.
    Does the data source contain extra spaces or tabs?
    Has the updated outline been saved?

Maybe you are looking for

  • Error through F-44 that  Consolidated  companies 1000 and ' ' are different

    Dear Expert At the time of Vendor clearing through F-44 I get the warning message that "Withholding tax information ignored" where Withholding tax related customization and master has been updated accordingly. If I ignore the same warning and save th

  • Weather bug in iOS 7.1.1

    When I click on weather in otification, a white bar comes on left side for just 2 sec. Also when I close the app, it does the same.

  • Home sharing - view format for other users tunes

    When I home share with another user's tunes, I can't get a fully organised view format (e.g. under "view" menu, sort by list, cover flow etc are greyed out). I can only get a single long list which is pretty-not-useful... It looks like this is the on

  • SEM-BPS code

    Dear Friends, Req: Varaible gets current or entered month value and the value of variable will be summed up till 012th month. It should not go > 12.  Eg: Assum the entered value = 007 and the calculation goes 008, 009, 010, 011 & 012. In order to ful

  • Convert Multipage fireworks document to HTML file

    Hi, I am preparing a Fireworks multipage file containing visual style guide of a product. I would like to convert this to html file for maintainance by other designers and developers. How can I convert all pages to a html file? I tried to export to h