Error while loading the Hierarchy from R/3 to BI.

Dear all ,
I am trying to load a hierarchy FROM R/3 to BI . When I am executing the Info package its showing an below Error.
Hierarchy object is u201CWBS elementu201D
The level of the node ID 01494179 does not suit the lev. of the higher lev. node
The level of the node ID 01494178 does not suit the lev. of the higher lev. node
The level of the node ID 01493822 does not suit the lev. of the higher lev. node
Could you please let me know what would be the reasonu2026u2026?
Regards,
Raghu

Hi
looks like there is some inconsistency in hierchy data you are tring to laod.
Check hierarchy in r3 if its ok, if yes try deleting complete hierarchy and reloading it.
You may also chose to adjust it manually
Regards
Sudeep

Similar Messages

Error while loading the data from PSA to Data Target

Hi to all,
     I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
      Request IDoc : Application document posted
      Info IDoc 2 : Application document posted
      Info IDoc 1 : Application document posted
      Info IDoc 4 : Application document posted
      Info IDoc 3 : Application document posted
      Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
      Update PSA ( 2462 Records posted ) : No errors
      Transfer Rules ( 2462 -> 2462 Records ) : No errors
      Update rules ( 2462 -> 2462 Records ) : No errors
      Update ( 0 new / 0 changed ) : Errors occurred
      Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
Saran

Hi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

Error while loading the data from text file

Hi,
I got an error " Data Value Encountered before all Dimensions selected" while loading the data from the text file.
Can any one please suggest me the solution.

Possible Solutions
Make sure that the data source is valid.
Is a member from each dimension specified correctly in the data source or rules file?
Is the numeric data field at the end of the record? If not, move the numeric data field in the data source or move the numeric data field in the rules file.
Are all members that might contain numbers (such as "100") enclosed in quotation marks in the data source?
If you are using a header, is the header set up correctly? Remember that you can add missing dimension names to the header.
Does the data source contain extra spaces or tabs?
Has the updated outline been saved?

Error while loading the data from excel to database.

Hi,
I am using PL/SQL developer to load the data from excel to database. I will set the data source in the control panel and will proceed through ODBC importer in pl/sql developer to import the data.
What exactly the error is when i click the filename to view the result preview it shows an error as:
The field is too small to accept the amount of data you attempted to add. Try inserting or pasting less data.
Kindly help with solution.
Thanks/Regards
Sakthivarman J.

Hello;
That error message comes from Microsoft, so something in you Excel sheet is the cause.
Its a pain but I would check properties of each column in case Excel decided to add something, a comma for example.
Do you have a column over 255 characters? Look there first. If any length is greater than 255 it will crash and burn.
Or convert it to a CSV and create an external table.
Best Regards
mseberg
Might also throw an 3163 as an error where you cannot see it.
Edited by: mseberg on Sep 9, 2011 7:34 AM

Error while loading the data from ODS to InfoCube

hai
Im trying to load the data from ODS to InfoCube for particular year .
But it says that there is a source system problem .
why it is like that .
pls tell me
i ll assing the points
rizwan

Hi Rizwan,
you didn't mention the error message in details. there could be a few places to be checked:
- check if BW itself source system is active and in tact and reactivate if necessary
- check if update rule is active and reactivate if necessary
- check if ODS is active and reactivate if necessary
Regards,
Lilly

Error while loading the Hierarchy to 0GLACCEXT

Dear all ,
I am trying to load a hierarchy ZEM 1 that is manually created in R/3. when I am executing the Infopackage its showing an Error that
1.Record 8 :Node characteristic 0GL_ACCOUNT is not entered as hierarchy characteristic for 0GLACCEXT
2.Too many error records - update terminated
and what is the the concept of 0BAL_DPEND to be added as attribute to OGLACCEXT.
Thanks

Hi Dash ,
I am providing the long test for the error ...Also can you tell me how I should use 0BAL_DPEND field as an attribute of Hieararchy of 0GLACCEXT. Coz i am supposed to do this
Hierarchy for Characteristic 0GLACCEXT with Attribute 0BAL_DEPEND
The hierarchy for characteristic 0GLACCEXT is used as the financial statement version in BW queries. To technically enable the particular exception aggregation for contra items, the hierarchy table of characteristic 0GLACCEXT contains the attribute Balance-Dependency of a Hierarchy Node (technical name 0BAL_DEPEND).
The Long Error Message
Diagnosis
 The nodes NODEID = [00000194, 00001627 ] have the same node names
 NODENAME = '10000000950090 '. This is not allowed because neither node
 is a leaf and both nodes are assigned to the same characteristic
 0GL_ACCOUNT .
 Note that a maximum of 50 characters is available for message variables.
 The node name NODENAME = '10000000950090 ' might not be displayed in its
 full length.
System Response
Procedure
 Try to localize the problem. If the hierarchy is loaded from an SAP
 source system, you can check whether the extracted data is correct by
executing transaction RSA3 in the source system. If necessary, check if
the data is modified with a user exit. If the hierarchy is loaded from a
file, check the contents of this file. The problem might also be due to
an error in the transfer rules or in the transformation.
You can identify the two duplicate nodes from the values for the node ID
NODEID = [00000194, 00001627 ].
The problem can be caused by identical nodes delivered more than once
from the source. It is also possible that incorrect values for
parameters such as the node name NODENAME or validity period [DATEFROM,
DATETO] are the cause of the problem.
First check if the value for node name NODENAME = '10000000950090 ' is
correct. The node name consists of the characteristic value for the
hierarchy basic characteristic and the characteristic values of all the
characteristics compounded to this characteristic. Errors creating the
node name often result in duplicate nodes. This problem also occurs if
the node names of all nodes are initial.
If the structure of the hierarchy is defined as time-dependent, the time
validity of a node can be restricted with the fields DATEFROM and
DATETO. Duplicate nodes generally do not occur if the validity intervals
of two nodes do not overlap in time. In this case check if the fields
DATEFROM and DATETO are correctly filled.
In this case the duplicate nodes are not leaves. If you want to reuse an
existing subtree at another location in the hierarchy, you can refer to
this subtree with a link node. Possibly one of the two duplicate nodes
were incorrectly not marked as link nodes.
please Suggest What to do

Error while load the data from CSV with CTL file..?

Hi TOM,
When i try to load data from CSV file to this table,
CTL File content:
load data
into table XXXX append
     Y_aca position char (3),
     x_date position date 'yyyy/mm/dd'
NULLIF (x_date = ' '),
X_aca position (* + 3) char (6)
"case when :Y_aca = 'ABCDDD' and :XM_dt is null then
decode(:X_aca,'AB','BA','CD',
'DC','EF','FE','GH','HG',:X_aca)
else :X_aca
end as X_aca",
Z_cdd position char (2),
     XM_dt position date 'yyyy/mm/dd'
NULLIF XM_dt = ' ',
When I try the above CTL file; geting the following error..
SQL*Loader-281: Warning: ROWS parameter ignored in parallel mode.
SQL*Loader-951: Error calling once/load initialization
ORA-02373: Error parsing insert statement for table "XYZ"."XXXX".
ORA-00917: missing comma

Possible Solutions
Make sure that the data source is valid.
Is a member from each dimension specified correctly in the data source or rules file?
Is the numeric data field at the end of the record? If not, move the numeric data field in the data source or move the numeric data field in the rules file.
Are all members that might contain numbers (such as "100") enclosed in quotation marks in the data source?
If you are using a header, is the header set up correctly? Remember that you can add missing dimension names to the header.
Does the data source contain extra spaces or tabs?
Has the updated outline been saved?

Error While loading a image from database

Purpose
Error While loading the Image from the database
ORA-06502: PL/SQL : numeric or value error:Character string buffer too small
ORA-06512: at "Sys.HTP" ,line 1480
Requirement:
I am developing the web pages using PSP(Pl/sql Serverpages) . I have a requirement to show a image in the webpage. I got the following procedures from the oracle website.
I have created the following table to store the images
create table DEMO
ID INTEGER not null,
THEBLOB BLOB
And I also uploaded the Images. Now I am try to get a image from the table using the following procedure .But I am getting the error message line 25( htp.prn( utl_raw.cast_to_varchar2( l_raw ) );) .at it throws the following error messages
ORA-06502: PL/SQL : numeric or value error:Character string buffer too small
ORA-06512: at "Sys.HTP" ,line 1480
Procedure that I used to get the image
create or replace package body image_get
as
procedure gif( p_id in demo.id%type )
is
l_lob blob;
l_amt number default 30;
l_off number default 1;
l_raw raw(4096);
begin
select theBlob into l_lob
from demo
where id = p_id;
-- make sure to change this for your type!
owa_util.mime_header( 'image/gif' );
begin
loop
dbms_lob.read( l_lob, l_amt, l_off, l_raw );
-- it is vital to use htp.PRN to avoid
-- spurious line feeds getting added to your
-- document
htp.prn( utl_raw.cast_to_varchar2( l_raw ) );
l_off := l_off+l_amt;
l_amt := 4096;
end loop;
exception
when no_data_found then
NULL;
end;
end;
end;
What I have to do to correct this problem. This demo procedure and table that I am downloaded from oracle. Some where I made a mistake. any help??
Thanks,
Nats

Hi Satish,
I have set the raw value as 3600 but still its gives the same error only. When I debug the procedure its throwing the error stack in
SYS.htp.prn procedure of the following line of code
if (rows_in < pack_after) then
while ((len - loc) >= HTBUF_LEN)
loop
rows_in := rows_in + 1;
htbuf(rows_in) := substr(cbuf, loc + 1, HTBUF_LEN);
loc := loc + HTBUF_LEN;
end loop;
if (loc < len)
then
rows_in := rows_in + 1;
htbuf(rows_in) := substr(cbuf, loc + 1);
end if;
return;
end if;
Its a system procedure. I don't no how to proceed .. I am really stucked on this....is their any other method to take picture from the database and displayed in the web page.....???? any idea..../suggesstion??
Thanks for your help!!!.

Error when loading the data from PSA to ODS......

Hi BW guru's,
i am facing one problem while loading the data from PSA to ODS.so please help me in this regard.
Please give a step by step guidelines for me...
the error while loading the data from PSA to ODS is "There are no PSA tables for these selection criteria","An error occurred when reading PSA data".
thanks in advance,
ashok.

hi ashok,
u can push data from psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
or
In ods > delete the failed request>goto the processing tab-->select 3rd option " psa and then subsequentially to data targets ", --> schedule the infopackage.
bye
sunil

Error while loading the WSLD file

Hi all
I am trying to consume a Webservice. When i try to create the Model out of the WSDL file, it says "Error while loading the WSDL file".
Its an XI webservice, so i cannot view it from Webservice navigator.
How could i find out that, the problem is with the Webservice or i am missing any thing
Kindly help
regards
Deepu

Hi
I checked the log and i am getting the following exceptions
1.DynamicProxy.TempDir=C:\DOCUME1\DEEPUM1\LOCALS~1\Temp\, DynamicProxy.INetProxy.Host=}'
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:413)
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.WebserviceClientException: GenericServiceFactory initialization problem. Could not load web service model.
2. Caused by: com.sap.engine.lib.xml.util.NestedException: IO Exception occurred while parsing file:Invalid Response Code: (401) Unauthorized. The requested URL was:"http://Pinnacle:50000/XISOAPAdapter/MessageServlet?channel=:PowerEP_BusService:Out_SOAP_DocViewDownload" -> com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL
3. java.lang.NullPointerException
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DOperationImpl.initParameters_DocumentStyle(DOperationImpl.java:59)
Is this any authorization problem
regards
Deepu

Using FF to access my AOL emails I get "There was an error while loading the message. Please try again later." Access is OK via Chrome, IE & AOL's own desktop.

"There was an error while loading the message. Please try again later." is a recent (3/4 days) error message I get when accessing my AOL emails. I can access the page and move them between states but cannot open them to read. Chrome, IE and AOL's own desktop open emails OK & can access them from the wife's PC using my AOL details. Have cleaned the history tab of everything in FF, have also removed it with add/rem progs and reinstalled - still I get the above message.
PC - W7 Pro 64 bit, 16GB RAM etc.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

WARNING: Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. These cannot be recovered unless they have been backed up to an external device!

Getting Duplicate data Records error while loading the Master data.

Hi All,
We are getting Duplicate data Records error while loading the Profit centre Master data. Master data contains time dependent attributes.
the load is direct update. So i made it red and tried to reloaded from PSA even though it is throwing same error.
I checked in PSA. Showing red which records have same Profit centre.
Could any one give us any suggestions to resolve the issues please.
Thanks & Regards,
Raju

Hi Raju,
I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
Hope this helps you.
Thanks & Regards,
Nithin Reddy.

Records was deleted at R/3 sys - getting error while loading the data

Hi All,
we are extracting the data from 2LIS_12_VCITM, 2LIS_11_VASCL, 2LIS_11_V_ITM, 2LIS_13_VDITM and 2LIS_11_VAITM into Cube RSD_C03. But one record (Sales Order) was deleted at R/3 system so we getting the error message that Caller 09 contains an error message while loading the data from 2LIS_12_VCITM.
we have replicate the DataSource and activate Trans rules but no use still getting the same error.
when we execute the data source 2LIS_12_VCITM at RSA3 with update mode as D (Transfer of the deltas since the last request)getting error message that Errors occurred during the extraction
and we are getting the zero records at RSA3 for the 2LIS_12_VCITM as update mode as F (Transfer of all requested data)
And getting shot dump that TSV_TNEW_PAGE_ALLOC_FAILED at BW side.
Could you kindly suggest me any one how to rectify this error.
Thanks in Advance,
Shaliny. M

hai Lilly
I activated myself source system and replicate the my datasource .
Then activate the update rules for ODS , InfoCube and InfoCube .
Then i tried to load the data into InfoCube from ODs .
Again im getting same problem .
why it is like that
pls tell me
rizwan

There was an error while loading the message. Please try again later. get this when trying to open emails

from today only when i try to open my emails i get the following message
There was an error while loading the message. Please try again later.
I did a restore earlier and not worked since then i ues Aol but have never had a problem before someone please help

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

Error while loading the planning book

Hi There,
I am getitng the below error while loading the data in planning book
"Error for COM routine using application program (return code 40,016)
Error reading data - Planning book cannot be processed further"
Ran /SAPAPO/TS_LCM_CONS_CHECK and /SAPAPO/TS_LCM_REORG but its not working , still getting the same error.
Could you please advise?
Thanks,
Krishna

Hi Krishna,
Looks like a key figure might be incorrectly created or there might be a problem in aggregation/disaggregation of key figures due to numerous number of CVCs.
Regards
JB

Error while loading the Hierarchy from R/3 to BI.

Similar Messages

Maybe you are looking for