Error while loading the multiple instance of Acrobat
Dear all,
While loading multiple instances of an acrobat application I get an error message stating that:
"The organizer database is damaged and will be reset the next time Acrobat is launched.
Quit the Application and close any currently opened browsers."
Can anyone tell me the reason why this occurs, the version of the acrobat is 8.0 (it is a licencedVersion).
Note: The Snapshot of the image is attached for further reference.
Regard's
Amith Sai
Dear brennao,
Thank you for your reply, I followed the same procedure which you have mentioned in your reply, but still am facing the same problem is ther any other work around which would help me suppress this error.
plzzzzzzzzz reply...
Regard's
Amith Sai
Similar Messages
-
Hi,
I'm getting error as adobe Illustrator crashes while loading the multiple pages PDF file.
Please help me. Thanks in advance.Hi Monika,
I have downloaded the script to load the multiple page of pdf file.
I tried loading the multiple page PDF file via File Menu -> Scripts -> Other Script...
After executing the script file -> Browse and enter the page number - > OK
The PDF file is looks like created from word document. There are total 120 pages in this file.
PDF file size is 20 MB.
I'm still searching for the solutions. Please help me.
Thanks,
Lavprasad -
Error while installing the named instance SQL 2012 Sp1
Hi,
I am getting below error while installing the named instance with features Data base engine. on same server box 2 named instance already installed and working...please suggest. i have done a lot of troubleshooting..(configure local system for Db engines
during installation, tried to install after another domain ID., repair and uninstalled existing and retried.) .. please s if i need to do anything else to resolve the issue.. installation account is domain admin account...
Can i rename the installation domain account profile from sql server that used for 2 named instance and for 3 rd named instance i am trying... is any impact after profile rename from the local sql server on any instance already configured...
Shailendra Devthanks alberto.
here is
2015-03-24 19:48:49.42 Server Microsoft SQL Server 2012 (SP1) - 11.0.3000.0 (X64)
Oct 19 2012 13:38:57
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
2015-03-24 19:48:49.42 Server (c) Microsoft Corporation.
2015-03-24 19:48:49.42 Server All rights reserved.
2015-03-24 19:48:49.42 Server Server process ID is 3460.
2015-03-24 19:48:49.42 Server System Manufacturer: 'Xen', System Model: 'HVM domU'.
2015-03-24 19:48:49.42 Server Authentication mode is WINDOWS-ONLY.
2015-03-24 19:48:49.42 Server Logging SQL Server messages in file 'D:\Program Files\Microsoft SQL Server\MSSQL11.SCSMDB\MSSQL\Log\ERRORLOG'.
2015-03-24 19:48:49.42 Server The service account is 'AIRWORKS\scadmin'. This is an informational message; no user action is required.
2015-03-24 19:48:49.42 Server Registry startup parameters:
-d D:\Program Files\Microsoft SQL Server\MSSQL11.SCSMDB\MSSQL\DATA\master.mdf
-e D:\Program Files\Microsoft SQL Server\MSSQL11.SCSMDB\MSSQL\Log\ERRORLOG
-l D:\Program Files\Microsoft SQL Server\MSSQL11.SCSMDB\MSSQL\DATA\mastlog.ldf
2015-03-24 19:48:49.42 Server Command Line Startup Parameters:
-s "SCSMDB"
-m "SqlSetup"
-T 4022
-T 4010
-T 1905
-T 3701
-T 8015
2015-03-24 19:48:49.69 Server SQL Server detected 1 sockets with 1 cores per socket and 2 logical processors per socket, 2 total logical processors; using 2 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2015-03-24 19:48:49.69 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2015-03-24 19:48:49.69 Server Detected 15624 MB of RAM. This is an informational message; no user action is required.
2015-03-24 19:48:49.69 Server Using conventional memory in the memory manager.
2015-03-24 19:48:49.98 Server Perfmon counters for resource governor pools and groups failed to initialize and are disabled.
2015-03-24 19:48:50.01 Server This instance of SQL Server last reported using a process ID of 5124 at 3/24/2015 7:48:48 PM (local) 3/24/2015 2:18:48 PM (UTC). This is an informational message only; no user action is required.
2015-03-24 19:48:50.03 Server Node configuration: node 0: CPU mask: 0x0000000000000003:0 Active CPU mask: 0x0000000000000003:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2015-03-24 19:48:50.07 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2015-03-24 19:48:50.30 Server Database Mirroring Transport is disabled in the endpoint configuration.
2015-03-24 19:48:50.58 spid5s Warning ******************
2015-03-24 19:48:50.65 spid5s SQL Server started in single-user mode. This an informational message only. No user action is required.
2015-03-24 19:48:50.66 spid5s Starting up database 'master'.
2015-03-24 19:48:50.90 spid5s 9 transactions rolled forward in database 'master' (1:0). This is an informational message only. No user action is required.
2015-03-24 19:48:51.04 Server CLR version v4.0.30319 loaded.
2015-03-24 19:48:51.17 spid5s 0 transactions rolled back in database 'master' (1:0). This is an informational message only. No user action is required.
2015-03-24 19:48:51.17 spid5s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2015-03-24 19:48:51.39 Server Software Usage Metrics is enabled.
2015-03-24 19:48:51.81 spid5s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2015-03-24 19:48:51.83 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2015-03-24 19:48:51.86 spid5s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2015-03-24 19:48:52.02 spid5s SQL Trace ID 1 was started by login "sa".
2015-03-24 19:48:52.16 spid5s Server name is 'AWISCDB\SCSMDB'. This is an informational message only. No user action is required.
2015-03-24 19:48:52.35 spid12s The certificate [Cert Hash(sha1) "151C8B90A9A8AF12F5EFAE3439F691E2C01A7355"] was successfully loaded for encryption.
2015-03-24 19:48:52.35 spid12s Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\SCSMDB ].
2015-03-24 19:48:52.40 spid12s Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the trace flag 7806.
This is an informational message only. No user action is required.
2015-03-24 19:48:52.43 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Windows return code: 0x490, state: 16. Failure to register a SPN might cause integrated
authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually registered.
2015-03-24 19:48:52.45 Server SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not be possible until a SPN is registered for the SQL Server service. This is an informational
message. No user action is required.
2015-03-24 19:48:54.03 Server The SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [ MSSQLSvc/AWISCDB.AIRWORKS.IN:SCSMDB ] for the SQL Server service.
2015-03-24 19:48:54.03 spid14s A new instance of the full-text filter daemon host process has been successfully started.
2015-03-24 19:48:54.86 spid6s Starting up database 'mssqlsystemresource'.
2015-03-24 19:48:54.86 spid5s Starting up database 'msdb'.
2015-03-24 19:48:54.87 spid6s The resource database build version is 11.00.3000. This is an informational message only. No user action is required.
2015-03-24 19:48:55.21 spid5s 12 transactions rolled forward in database 'msdb' (4:0). This is an informational message only. No user action is required.
2015-03-24 19:48:55.32 spid5s 0 transactions rolled back in database 'msdb' (4:0). This is an informational message only. No user action is required.
2015-03-24 19:48:55.32 spid6s Starting up database 'model'.
2015-03-24 19:48:55.32 spid5s Recovery is writing a checkpoint in database 'msdb' (4). This is an informational message only. No user action is required.
2015-03-24 19:48:55.72 spid6s Clearing tempdb database.
2015-03-24 19:48:57.22 spid6s Starting up database 'tempdb'.
2015-03-24 19:48:59.04 spid5s Database 'master' is upgrading script 'msdb110_upgrade.sql' from level 184551476 to level 184552376.
2015-03-24 19:48:59.04 spid5s ----------------------------------
2015-03-24 19:48:59.04 spid5s Starting execution of PRE_MSDB.SQL
2015-03-24 19:48:59.04 spid5s ----------------------------------
2015-03-24 19:49:00.23 spid5s Setting database option COMPATIBILITY_LEVEL to 100 for database 'msdb'.
2015-03-24 19:49:00.57 spid5s -----------------------------------------
2015-03-24 19:49:00.57 spid5s Starting execution of PRE_SQLAGENT100.SQL
2015-03-24 19:49:00.57 spid5s -----------------------------------------
2015-03-24 19:49:00.61 spid5s Setting database option COMPATIBILITY_LEVEL to 110 for database 'msdb'.
2015-03-24 19:49:00.73 spid5s Configuration option 'allow updates' changed from 1 to 1. Run the RECONFIGURE statement to install.
2015-03-24 19:49:00.73 spid5s Configuration option 'allow updates' changed from 1 to 1. Run the RECONFIGURE statement to install.
2015-03-24 19:49:01.78 spid5s Attempting to load library 'xpstar.dll' into memory. This is an informational message only. No user action is required.
2015-03-24 19:49:01.79 spid5s Using 'xpstar.dll' version '2011.110.3000' to execute extended stored procedure 'xp_instance_regread'. This is an informational message only; no user action is required.
2015-03-24 19:49:01.80 spid5s DBCC TRACEOFF 1717, server process ID (SPID) 5. This is an informational message only; no user action is required.
2015-03-24 19:49:01.80 spid5s DBCC execution completed. If DBCC printed error messages, contact your system administrator.
2015-03-24 19:49:01.81 spid5s
2015-03-24 19:49:01.81 spid5s Creating table temp_sysjobschedules
2015-03-24 19:49:01.91 spid5s
2015-03-24 19:49:01.91 spid5s Alter table sysdownloadlist...
2015-03-24 19:49:01.92 spid5s
2015-03-24 19:49:01.92 spid5s Alter table sysjobhistory...
2015-03-24 19:49:01.92 spid5s
2015-03-24 19:49:01.92 spid5s Alter table systargetservers...
2015-03-24 19:49:01.92 spid5s
2015-03-24 19:49:01.92 spid5s Alter table sysjobsteps...
2015-03-24 19:49:01.99 spid5s Configuration option 'allow updates' changed from 1 to 0. Run the RECONFIGURE statement to install.
2015-03-24 19:49:01.99 spid5s Configuration option 'allow updates' changed from 1 to 0. Run the RECONFIGURE statement to install.
2015-03-24 19:49:01.99 spid5s
2015-03-24 19:49:01.99 spid5s -----------------------------------------
2015-03-24 19:49:01.99 spid5s Execution of PRE_SQLAGENT100.SQL complete
2015-03-24 19:49:01.99 spid5s -----------------------------------------
2015-03-24 19:49:02.01 spid5s DMF pre-upgrade steps...
2015-03-24 19:49:02.13 spid5s DC pre-upgrade steps...
2015-03-24 19:49:02.13 spid5s Check if Data collector config table exists...
2015-03-24 19:49:02.13 spid5s Data Collector state before upgrade: 0
2015-03-24 19:49:02.13 spid5s pre_dc100::Check if syscollector_collection_sets_internal table exists...
2015-03-24 19:49:02.13 spid5s pre_dc100::Capturing Collection set status in temp table...
2015-03-24 19:49:02.19 spid5s Deleting cached auto-generated T-SQL Data Collection packages from msdb...
2015-03-24 19:49:02.19 spid5s End of DC pre-upgrade steps.
2015-03-24 19:49:02.19 spid5s DAC pre-upgrade steps...
2015-03-24 19:49:02.19 spid5s Starting DAC pre-upgrade steps ...
2015-03-24 19:49:02.19 spid5s End of DAC pre-upgrade steps.
2015-03-24 19:49:02.19 spid5s ----------------------------------
2015-03-24 19:49:02.19 spid5s Starting execution of MSDB.SQL
2015-03-24 19:49:02.19 spid5s ----------------------------------
2015-03-24 19:49:02.23 spid5s Configuration option 'allow updates' changed from 0 to 1. Run the RECONFIGURE statement to install.
2015-03-24 19:49:02.23 spid5s Configuration option 'allow updates' changed from 0 to 1. Run the RECONFIGURE statement to install.
2015-03-24 19:49:02.27 spid5s Checking the size of MSDB...
2015-03-24 19:49:02.53 spid5s
2015-03-24 19:49:02.53 spid5s Setting database option TRUSTWORTHY to ON for database 'msdb'.
2015-03-24 19:49:02.53 spid5s Setting database option RECOVERY to SIMPLE for database 'msdb'.
2015-03-24 19:49:02.64 spid5s ----------------------------------
2015-03-24 19:49:02.64 spid5s Finished execution of MSDB.SQL
2015-03-24 19:49:02.64 spid5s ----------------------------------
2015-03-24 19:49:02.64 spid5s -----------------------------------------
2015-03-24 19:49:02.64 spid5s Starting execution of MSDB_VERSIONING.SQL
2015-03-24 19:49:02.64 spid5s -----------------------------------------
2015-03-24 19:49:02.64 spid5s -----------------------------------------
2015-03-24 19:49:02.64 spid5s Finished execution of MSDB_VERSIONING.SQL
2015-03-24 19:49:02.64 spid5s -----------------------------------------
2015-03-24 19:49:02.64 spid5s Dropping view MSdatatype_mappings...
2015-03-24 19:49:02.65 spid5s Dropping view sysdatatypemappings...
2015-03-24 19:49:02.65 spid5s Dropping table MSdbms_datatype_mapping...
2015-03-24 19:49:02.66 spid5s Dropping table MSdbms_map...
2015-03-24 19:49:02.67 spid5s Dropping table MSdbms_datatype...
2015-03-24 19:49:02.67 spid5s Dropping table MSdbms...
2015-03-24 19:49:02.73 spid5s Creating table MSdbms
2015-03-24 19:49:02.75 spid5s Creating table MSdbms_datatype
2015-03-24 19:49:03.01 spid5s Creating table MSdbms_map
2015-03-24 19:49:03.02 spid5s Creating table MSdbms_datatype_mapping
2015-03-24 19:49:03.03 spid5s Definining default datatype mappings
2015-03-24 19:49:03.04 spid5s Creating datatype mappings for MSSQLSERVER to ORACLE8
2015-03-24 19:49:03.21 spid5s Creating datatype mappings for MSSQLSERVER to ORACLE9
2015-03-24 19:49:03.29 spid5s Creating datatype mappings for MSSQLSERVER to ORACLE10
2015-03-24 19:49:03.37 spid5s Creating datatype mappings for MSSQLSERVER to ORACLE11
2015-03-24 19:49:03.46 spid5s Creating datatype mappings for MSSQLSERVER to DB2
2015-03-24 19:49:03.54 spid5s Creating datatype mappings for MSSQLSERVER to SYBASE
2015-03-24 19:49:03.62 spid5s Creating datatype mappings for ORACLE8 to MSSQLSERVER
2015-03-24 19:49:03.71 spid5s Creating datatype mappings for ORACLE9 to MSSQLSERVER
2015-03-24 19:49:03.83 spid5s Creating datatype mappings for ORACLE10 to MSSQLServer
2015-03-24 19:49:03.95 spid5s Creating datatype mappings for ORACLE11 to MSSQLServer
2015-03-24 19:49:04.08 spid5s Creating view MSdatatype_mappings
2015-03-24 19:49:04.08 spid5s Creating view sysdatatypemappings
2015-03-24 19:49:05.08 spid5s
2015-03-24 19:49:05.08 spid5s Creating table syssubsystems...
2015-03-24 19:49:05.09 spid5s
2015-03-24 19:49:05.09 spid5s Creating view sysproxyloginsubsystem_view...
2015-03-24 19:49:05.11 spid5s
2015-03-24 19:49:05.11 spid5s Creating trigger trig_sysoriginatingservers_delete...
2015-03-24 19:49:05.11 spid5s
2015-03-24 19:49:05.11 spid5s Creating view sysoriginatingservers_view...
2015-03-24 19:49:05.12 spid5s
2015-03-24 19:49:05.12 spid5s Creating trigger trig_sysjobs_insert_update...
2015-03-24 19:49:05.13 spid5s
2015-03-24 19:49:05.13 spid5s Creating view sysjobs_view...
2015-03-24 19:49:05.15 spid5s
2015-03-24 19:49:05.15 spid5s Creating trigger trig_sysschedules_insert_update...
2015-03-24 19:49:05.16 spid5s
2015-03-24 19:49:05.16 spid5s Creating view sysschedules_localserver_view...
2015-03-24 19:49:05.21 spid5s
2015-03-24 19:49:05.21 spid5s Creating view systargetservers_view...
2015-03-24 19:49:05.23 spid5s
2015-03-24 19:49:05.23 spid5s Creating view sysalerts_performance_counters_view...
2015-03-24 19:49:05.25 spid5s
2015-03-24 19:49:05.25 spid5s Creating function SQLAGENT_SUSER_SNAME ...
2015-03-24 19:49:05.25 spid5s
2015-03-24 19:49:05.25 spid5s Creating function SQLAGENT_SUSER_SID ...
2015-03-24 19:49:05.26 spid5s
2015-03-24 19:49:05.26 spid5s Creating procedure SP_SQLAGENT_IS_SRVROLEMEMBER...
2015-03-24 19:49:05.27 spid5s
2015-03-24 19:49:05.27 spid5s Creating procedure sp_verify_category_identifiers...
2015-03-24 19:49:05.27 spid5s
2015-03-24 19:49:05.27 spid5s Creating function agent_datetime...
2015-03-24 19:49:05.27 spid5s
2015-03-24 19:49:05.27 spid5s Creating procedure sp_verify_proxy_identifiers...
2015-03-24 19:49:05.28 spid5s
2015-03-24 19:49:05.28 spid5s Creating procedure sp_verify_credential_identifiers...
2015-03-24 19:49:05.29 spid5s
2015-03-24 19:49:05.29 spid5s Creating procedure sp_verify_subsystems...
2015-03-24 19:49:05.30 spid5s
2015-03-24 19:49:05.30 spid5s Creating procedure sp_verify_subsystem_identifiers...
2015-03-24 19:49:05.30 spid5s
2015-03-24 19:49:05.30 spid5s Creating procedure sp_verify_login_identifiers...
2015-03-24 19:49:05.31 spid5s
2015-03-24 19:49:05.31 spid5s Creating procedure sp_verify_proxy...
2015-03-24 19:49:05.31 spid5s
2015-03-24 19:49:05.31 spid5s Creating procedure sp_add_proxy...
2015-03-24 19:49:05.32 spid5s
2015-03-24 19:49:05.32 spid5s Creating procedure sp_delete_proxy...
2015-03-24 19:49:05.32 spid5s
2015-03-24 19:49:05.32 spid5s Creating procedure sp_update_proxy...
2015-03-24 19:49:05.33 spid5s
2015-03-24 19:49:05.33 spid5s Creating procedure sp_sqlagent_is_member...
2015-03-24 19:49:05.33 spid5s
2015-03-24 19:49:05.33 spid5s Creating procedure sp_verify_proxy_permissions...
2015-03-24 19:49:05.34 spid5s
2015-03-24 19:49:05.34 spid5s Creating procedure sp_help_proxy...
2015-03-24 19:49:05.35 spid5s
2015-03-24 19:49:05.35 spid5s Creating procedure sp_get_proxy_properties...
2015-03-24 19:49:05.36 spid5s
2015-03-24 19:49:05.36 spid5s Creating procedure sp_grant_proxy_to_subsystem...
2015-03-24 19:49:05.36 spid5s
2015-03-24 19:49:05.36 spid5s Creating procedure sp_grant_login_to_proxy...
2015-03-24 19:49:05.37 spid5s
2015-03-24 19:49:05.37 spid5s Creating procedure sp_revoke_login_from_proxy...
2015-03-24 19:49:05.37 spid5s
2015-03-24 19:49:05.37 spid5s Creating procedure sp_revoke_proxy_from_subsystem...
2015-03-24 19:49:05.38 spid5s
2015-03-24 19:49:05.38 spid5s Creating procedure sp_enum_proxy_for_subsystem...
2015-03-24 19:49:05.38 spid5s
2015-03-24 19:49:05.38 spid5s Creating procedure sp_enum_login_for_proxy...
2015-03-24 19:49:05.39 spid5s
2015-03-24 19:49:05.39 spid5s Creating procedure sp_reassign_proxy...
2015-03-24 19:49:05.40 spid5s
2015-03-24 19:49:05.40 spid5s Creating procedure sp_sqlagent_get_startup_info...
2015-03-24 19:49:05.41 spid5s
2015-03-24 19:49:05.41 spid5s Creating procedure sp_sqlagent_update_agent_xps...
2015-03-24 19:49:05.42 spid5s
2015-03-24 19:49:05.42 spid5s Creating procedure sp_sqlagent_has_server_access...
2015-03-24 19:49:05.45 spid5s
2015-03-24 19:49:05.45 spid5s Creating procedure sp_sqlagent_get_perf_counters...
2015-03-24 19:49:05.46 spid5s
2015-03-24 19:49:05.46 spid5s Creating procedure sp_sqlagent_notify...
2015-03-24 19:49:05.47 spid5s
2015-03-24 19:49:05.47 spid5s Creating procedure sp_is_sqlagent_starting...
2015-03-24 19:49:05.47 spid5s
2015-03-24 19:49:05.47 spid5s Creating procedure sp_verify_job_identifiers...
2015-03-24 19:49:05.48 spid5s
2015-03-24 19:49:05.48 spid5s Creating procedure sp_verify_schedule_identifiers...
2015-03-24 19:49:05.49 spid5s
2015-03-24 19:49:05.49 spid5s Creating procedure sp_verify_jobproc_caller...
2015-03-24 19:49:05.50 spid5s
2015-03-24 19:49:05.50 spid5s Creating procedure sp_downloaded_row_limiter...
2015-03-24 19:49:05.51 spid5s
2015-03-24 19:49:05.51 spid5s Creating procedure sp_post_msx_operation...
2015-03-24 19:49:05.54 spid5s
2015-03-24 19:49:05.54 spid5s Creating procedure sp_verify_performance_condition...
2015-03-24 19:49:05.58 spid5s
2015-03-24 19:49:05.58 spid5s Creating procedure sp_verify_job_date...
2015-03-24 19:49:05.59 spid5s
2015-03-24 19:49:05.59 spid5s Creating procedure sp_verify_job_time...
2015-03-24 19:49:05.61 spid5s
2015-03-24 19:49:05.61 spid5s Creating procedure sp_verify_alert...
2015-03-24 19:49:05.62 spid5s
2015-03-24 19:49:05.62 spid5s Creating procedure sp_update_alert...
2015-03-24 19:49:05.63 spid5s
2015-03-24 19:49:05.63 spid5s Creating procedure sp_delete_job_references...
2015-03-24 19:49:05.65 spid5s
2015-03-24 19:49:05.65 spid5s Creating procedure sp_delete_all_msx_jobs...
2015-03-24 19:49:05.66 spid5s
2015-03-24 19:49:05.66 spid5s Creating procedure sp_generate_target_server_job_assignment_sql...
2015-03-24 19:49:05.66 spid5s
2015-03-24 19:49:05.66 spid5s Creating procedure sp_generate_server_description...
2015-03-24 19:49:05.67 spid5s
2015-03-24 19:49:05.67 spid5s Creating procedure sp_msx_set_account...
2015-03-24 19:49:05.68 spid5s
2015-03-24 19:49:05.68 spid5s Creating procedure sp_msx_get_account...
2015-03-24 19:49:05.69 spid5s
2015-03-24 19:49:05.69 spid5s Creating procedure sp_delete_operator...
2015-03-24 19:49:05.70 spid5s
2015-03-24 19:49:05.70 spid5s Creating procedure sp_msx_defect...
2015-03-24 19:49:05.71 spid5s
2015-03-24 19:49:05.71 spid5s Creating procedure sp_msx_enlist...
2015-03-24 19:49:05.72 spid5s
2015-03-24 19:49:05.72 spid5s Creating procedure sp_delete_targetserver...
2015-03-24 19:49:05.73 spid5s
2015-03-24 19:49:05.73 spid5s Creating procedure sp_enlist_tsx
2015-03-24 19:49:05.74 spid5s
2015-03-24 19:49:05.74 spid5s Creating procedure sp_get_sqlagent_properties...
2015-03-24 19:49:05.76 spid5s
2015-03-24 19:49:05.76 spid5s Create procedure sp_set_sqlagent_properties...
2015-03-24 19:49:05.76 spid5s
2015-03-24 19:49:05.76 spid5s Creating procedure sp_add_targetservergroup...
2015-03-24 19:49:05.77 spid5s
2015-03-24 19:49:05.77 spid5s Creating procedure sp_update_targetservergroup...
2015-03-24 19:49:05.78 spid5s
2015-03-24 19:49:05.78 spid5s Creating procedure sp_delete_targetservergroup...
2015-03-24 19:49:05.78 spid5s
2015-03-24 19:49:05.78 spid5s Creating procedure sp_help_targetservergroup...
2015-03-24 19:49:05.79 spid5s
2015-03-24 19:49:05.79 spid5s Creating procedure sp_add_targetsvgrp_member...
2015-03-24 19:49:05.80 spid5s
2015-03-24 19:49:05.80 spid5s Creating procedure sp_delete_targetsvrgrp_member...
2015-03-24 19:49:05.81 spid5s
2015-03-24 19:49:05.81 spid5s Creating procedure sp_verify_category...
2015-03-24 19:49:05.81 spid5s
2015-03-24 19:49:05.81 spid5s Creating procedure sp_add_category...
2015-03-24 19:49:05.82 spid5s
2015-03-24 19:49:05.82 spid5s Creating procedure sp_update_category...
2015-03-24 19:49:05.83 spid5s
2015-03-24 19:49:05.83 spid5s Creating procedure sp_delete_category...
2015-03-24 19:49:05.83 spid5s
2015-03-24 19:49:05.84 spid5s Creating procedure sp_help_category...
2015-03-24 19:49:05.84 spid5s
2015-03-24 19:49:05.84 spid5s Creating procedure sp_help_targetserver...
2015-03-24 19:49:05.85 spid5s
2015-03-24 19:49:05.85 spid5s Creating procedure sp_resync_targetserver...
2015-03-24 19:49:06.06 spid5s
2015-03-24 19:49:06.06 spid5s Creating procedure sp_purge_jobhistory...
2015-03-24 19:49:06.09 spid5s
2015-03-24 19:49:06.09 spid5s Creating procedure sp_help_jobhistory...
2015-03-24 19:49:06.10 spid5s
2015-03-24 19:49:06.10 spid5s Creating procedure sp_add_jobserver...
2015-03-24 19:49:06.11 spid5s
2015-03-24 19:49:06.11 spid5s Creating procedure sp_delete_jobserver...
2015-03-24 19:49:06.11 spid5s Error: 10011, Severity: 16, State: 1.
2015-03-24 19:49:06.11 spid5s Access denied.
2015-03-24 19:49:06.11 spid5s Error: 917, Severity: 15, State: 1.
2015-03-24 19:49:06.11 spid5s An upgrade script batch failed to execute for database 'master' due to compilation error. Check the previous error message for the line which caused compilation to fail.
2015-03-24 19:49:06.11 spid5s Error: 912, Severity: 21, State: 2.
2015-03-24 19:49:06.11 spid5s Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 917, state 1, severity 15. This is a serious error condition which might interfere with regular
operation and the database will be taken offline. If the error happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective
actions and re-start the database so that the script upgrade steps run to completion.
2015-03-24 19:49:06.11 spid5s Error: 3417, Severity: 21, State: 3.
2015-03-24 19:49:06.11 spid5s Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup, repair it, or rebuild it. For more information about how to rebuild the master database, see SQL Server Books
Online.
2015-03-24 19:49:06.12 spid5s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
2015-03-24 19:49:06.50 spid12s The SQL Server Network Interface library successfully deregistered the Service Principal Name (SPN) [ MSSQLSvc/AWISCDB.AIRWORKS.IN:SCSMDB ] for the SQL Server service.
Shailendra Dev -
Error while loading the planning book
Hi There,
I am getitng the below error while loading the data in planning book
"Error for COM routine using application program (return code 40,016)
Error reading data - Planning book cannot be processed further"
Ran /SAPAPO/TS_LCM_CONS_CHECK and /SAPAPO/TS_LCM_REORG but its not working , still getting the same error.
Could you please advise?
Thanks,
KrishnaHi Krishna,
Looks like a key figure might be incorrectly created or there might be a problem in aggregation/disaggregation of key figures due to numerous number of CVCs.
Regards
JB -
Hi,
Getting error while loading the WSDL in Browser.Mentioned below is the link which trying to load.
http://10.162.32.113/DNBDAASEXCMDL4/AdapterProductService?wsdl
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
A string literal was not closed. Error processing resource 'http://10.162.32.113/DNBDAASEXCMDL4/AdapterProductService?wsdl'...
<xs:element name="POST_CODE" type="a
Please can any one help on this.That's no problem with the wsdl, it's the browser that's not able to show the xml, try on firefox or try using "show page source"...
-
Error while loading the data from PSA to Data Target
Hi to all,
I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document posted
Info IDoc 2 : Application document posted
Info IDoc 1 : Application document posted
Info IDoc 4 : Application document posted
Info IDoc 3 : Application document posted
Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
Update PSA ( 2462 Records posted ) : No errors
Transfer Rules ( 2462 -> 2462 Records ) : No errors
Update rules ( 2462 -> 2462 Records ) : No errors
Update ( 0 new / 0 changed ) : Errors occurred
Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
SaranHi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM -
Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")
I activated all 0* objects in BTMP and checked that they are all activated, but I found errors when opening the BEx Web Analyzer
Error messages :
Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")
ERROR: Command type SWITCH_AXES of object not recognized
ERROR: Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
So I ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version D report to check and choose validate.
Error messages :
Template Include Item HEADER_TEMPLATE unresolved or empty. Close and reopen template.
Template Include Item FOOTER_TEMPLATE unresolved or empty. Close and reopen template.
Width of object item:GROUP_ITEM:GROUP_ITEM_1 is very small (1amp;1)
Query does not exist in the BI System (Object QU )
Cannot instantiate data provider
I also ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version A and got the following errors:
Command type SWITCH_AXES of object not recognized
Command type SWITCH_AXES of object not recognized
Command type SWITCH_AXES of object not recognized
Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
Parameter GENERAL_TEXT_ELEMENT of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command SWITCH_AXES cannot be located in parameter ACTION
Command SWITCH_AXES cannot be located in parameter ACTION
Command SWITCH_AXES cannot be located in parameter ACTION
Parameter GENERIC_TEXT_BINDING of object item:GROUP_ITEM:GROUP_ITEM_1 cannot be higher-level node of GENERAL_TEXT_ELEMENT
Item item:GROUP_ITEM:GROUP_ITEM_1 of type DROPDOWN_ITEM cannot be a parent node of DATA_PROVIDER_REF
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of VISIBLE
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_POSITION
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_VISIBLE
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_ONLY
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
What could be the problem?hi,
Please look into this note let me it helps...url=https://websmp202.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=917950&_NLANG=E]Note 917950 - SAP NetWeaver 2004s: Setting Up BEx Web[/url]
check this link as well for [<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ca6de811-0c01-0010-43b2-c64584eef943">Bex Web Configuration</a>
wht is the SP Level?
Nagesh Ganisetti. -
Error while loading the WSLD file
Hi all
I am trying to consume a Webservice. When i try to create the Model out of the WSDL file, it says "Error while loading the WSDL file".
Its an XI webservice, so i cannot view it from Webservice navigator.
How could i find out that, the problem is with the Webservice or i am missing any thing
Kindly help
regards
DeepuHi
I checked the log and i am getting the following exceptions
1.DynamicProxy.TempDir=C:\DOCUME1\DEEPUM1\LOCALS~1\Temp\, DynamicProxy.INetProxy.Host=}'
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:413)
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.WebserviceClientException: GenericServiceFactory initialization problem. Could not load web service model.
2. Caused by: com.sap.engine.lib.xml.util.NestedException: IO Exception occurred while parsing file:Invalid Response Code: (401) Unauthorized. The requested URL was:"http://Pinnacle:50000/XISOAPAdapter/MessageServlet?channel=:PowerEP_BusService:Out_SOAP_DocViewDownload" -> com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL
3. java.lang.NullPointerException
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DOperationImpl.initParameters_DocumentStyle(DOperationImpl.java:59)
Is this any authorization problem
regards
Deepu -
"There was an error while loading the message. Please try again later." is a recent (3/4 days) error message I get when accessing my AOL emails. I can access the page and move them between states but cannot open them to read. Chrome, IE and AOL's own desktop open emails OK & can access them from the wife's PC using my AOL details. Have cleaned the history tab of everything in FF, have also removed it with add/rem progs and reinstalled - still I get the above message.
PC - W7 Pro 64 bit, 16GB RAM etc.Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.
<!-- VERY important to include-->
<b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u> -
Getting Duplicate data Records error while loading the Master data.
Hi All,
We are getting Duplicate data Records error while loading the Profit centre Master data. Master data contains time dependent attributes.
the load is direct update. So i made it red and tried to reloaded from PSA even though it is throwing same error.
I checked in PSA. Showing red which records have same Profit centre.
Could any one give us any suggestions to resolve the issues please.
Thanks & Regards,
RajuHi Raju,
I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
Hope this helps you.
Thanks & Regards,
Nithin Reddy. -
Error while loading the runtime repository via HTTP
Hi Experts,
I am trying to delete an enhancement and when I enter the component name and the enhancement set in BSP_WD_CMPWB. I get the following error when right click the enhanced view and select delete : Error while loading the runtime repository via HTTP. How do I delete this enhancement?
Regards
Abdullah Ismail.if for some reason the runtime repository is not coherent, you get an error each time you try to read it (and this is the case when you open a component using the transaction BSP_WD_CMPWB)
this is because the XML file is interpreted by a CALL TRANSFORMATION statement, and any incorrect node will raise an uncaught exception
solution:
enhanced view is contained into BSP application you have created the first time you enhanced the component
go to SE80 and enter the BSP application where your objects are stored (the name you provided the first time)
there you can modify directly the objects, including the runtime repository which is stored under node "Pages with flow Logic"
once the correction is done, you can access again your component through transaction BSP_WD_CMPWB (and delete it properly if this is what you want to do) -
from today only when i try to open my emails i get the following message
There was an error while loading the message. Please try again later.
I did a restore earlier and not worked since then i ues Aol but have never had a problem before someone please helpMany site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us! -
Error in loading the multiple file loading
hi,
i am following this blog to load the multiple files into rdbms table.
http://www.odigurus.com/2011/05/multiple-files-single-target-table.html
the problem is that when i assign the source Flat file Datastore
Model Resource Name #Project_Name.FILE_NAME
But when i point the Single File in the Resource Name:EMP.DMP. its working fine. loaded suceessfully.... But problem in Multiple loading???
it gives me error
SQL*Loader-500: Unable to open file (E:/File/#Project_Name.FILE_NAME)
SQL*Loader-553: file not found
SQL*Loader-509: System error: The system cannot find the file specified.
SQL*Loader-2026: the load was aborted because SQL Loader cannot continue.
********************Task Error Code In Loading**********************************************
import java.lang.String
import java.lang.Runtime as Runtime
from jarray import array
import java.io.File
import os
import re
ctlfile = r"""E:/File/Med_CDR_File.ctl"""
logfile = r"""E:/File/Med_CDR_File.log"""
outfile = r"""E:/File/Med_CDR_File.out"""
oracle_sid=''
if len('')>0: oracle_sid = '@'+''
loadcmd = r"""sqlldr 'test/<@=snpRef.getInfo("DEST_PASS") @>%s' control='%s' log='%s' > "%s" """ % (oracle_sid,ctlfile, logfile, outfile)
rc = os.system(loadcmd)
if rc <> 0 and rc <> 2:
raise "Load Error", "See %s for details" % logfile
# Init Vars
nbIns = 0
nbRej = 0
nbNull = 0
strprt = ""
maxAllowedError = r"""0"""
c = 0
flag = 0
# Open log file
f = open(logfile, "r")
try:
lines = f.readlines()
for line in lines:
if line.rstrip().upper().endswith(r"""TEST.TC$_0MSC_SMS:""".upper()):
flag = 1
c = 0
if flag == 1:
if c > 0 and c <= 4:
if c == 1 :
nbIns = int(re.findall("\d+", line)[0])
elif c == 2:
nbRej = int(re.findall("\d+", line)[0])
elif c == 4:
nbNull = int(re.findall("\d+", line)[0])
break
c+=1
strprt = "\n\tIns:\t%s\n\tReject:\t%s\n\tNullField:\t%s" % (nbIns, nbRej, nbNull)
finally:
f.close()
# if some rows has been rejected due to invalide data, check KM option LOA_ERRORS
if rc == 2:
if nbRej > int(maxAllowedError):
raise strprt
break
waiting
Regards,
Edited by: AMSI on Nov 10, 2012 1:40 AMHi AMSI,
Did you try to run only the interface? It might not work.
Try executing your interface from within a package. A previous step should refresh / set the variable.
Regards,
Jerome Fr -
Error while loading the data from text file
Hi,
I got an error " Data Value Encountered before all Dimensions selected" while loading the data from the text file.
Can any one please suggest me the solution.Possible Solutions
Make sure that the data source is valid.
Is a member from each dimension specified correctly in the data source or rules file?
Is the numeric data field at the end of the record? If not, move the numeric data field in the data source or move the numeric data field in the rules file.
Are all members that might contain numbers (such as "100") enclosed in quotation marks in the data source?
If you are using a header, is the header set up correctly? Remember that you can add missing dimension names to the header.
Does the data source contain extra spaces or tabs?
Has the updated outline been saved? -
Hi,
We are trying to copy data from one cube to another(it's exact copy). There are more than 11 million records so we have used calendar month as filter and divided the data in to many parts.
While loading the first request to the target cube, it failed resulting in a short dump. I checked in ST22 and it showed "Runtime Errors DBIF_RSQL_SQL_ERROR , Exception CX_SY_OPEN_SQL_DB" and I also found a message "ORA-00060: deadlock detected while waiting for resource" in the description of the Short Dump.
I found many threads here relevant to this exact issue but the only solution that I could find is to include a delete index and create index process in the chain before and after the data load process to the target cube. In our case, the target cube has no data and this would be the first request to the cube so there is no need to delete index in the first place but still the data load is failing.
For each load there are 50 data packages and 50k records for each packages. Only one or two packages have failed. Is there any way to recover only these two separatly instead of deleting the whole request and repeating the process.
If you have encountered a similar issue or if you have any suggestions, Please do help.
Thanks..Hi,
Can you see which data packages have RED status? Click on the live of the RED data package, and you have to find an ICON with update manually, or go to MENU -> REQUEST -> POST MANUALLY.
if you are lucky, it helps. Do not forget that this runs in DIALOG process, so don't leave BREAK.POINT in your transformation.
If you need any help, please let me know.
(The DEADLOCK problem: change the DTP BATCH setting, because it has problem with paralel loading, and there os a database deadlock. I suggest you to load in one process so: open DTP. after it, go to GOTO menu -> SETTINGS FOR BATCH MANAGER -> NUMBER OF PROCESSES, overwrite with 1. With that, deadlock may not occur.)
Regards,
Laszlo
Maybe you are looking for
-
How do I transfer music from my ipod to my itunes?
I got a new computer and just downloaded itunes, now i need to get the music from my ipod transferd into my itunes. help?
-
Biometric device is not showing up in the control panel
hello, i'm using elitebook 8440p. earlier i was using win 8, my biometric device was runnig fine. But when i begant use win 7, it started showing unavailable in the control panel. So I reinstalled it, now it is not showing up in the control panel to
-
Uncleared items in BRS to be captured
Dear All, As per my client requirement have developed a BRS report with separate annexure and summary report, report shows the items which are reconcilled and updated in tables as per the logic which i applied thru ABAP, now the issue is whenever ban
-
Fuzzy photo, when viewed on iPad.
Dreamweaver novice working on a personal site; worked in Photoshop since the early 1990s. I created graphics in Photoshop that competent web designers would do in Dreamweaver. It worked well, until this page. [see: http://www.adrianhoff.com/Pages/Ta
-
Idocs are unable to transfer from R3 to PI system, IDOC status is 03
Hello Gurus, Idocs are unable to transfer from R3 to PI system, IDOC status is 03 in sm58 getting below error RFC are working fine "EDISDEF: Port SAPCEP segment defn Z2SH_DESCR000 in IDoc type MATMAS03 CIM" Regrds vamsi