Error while loading the portal content in Content administrator

hi all,
After successful login in to portal, by default portal loads the Content Administrator.
While loading PORTAL CONTENT its throwing an error message u201CERROR: OBJECT REQUIREDu201D.
Where as its the same error with the System administrator--> Portal content. 
     This is the first time I have seen this error. Please suggest me the solution. This is a high priority issue.
regards,
kishore

Issue resolved, check with the link        
Javascript error when loading Portal Content
regards,
kishore

Similar Messages

  • Error while loading the data from PSA to Data Target

    Hi to all,
         I'm spacing some error while loading the data to data target.
    Error :  Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
    Details:
    Requests (messages): Everything OK
    Extraction (messages): Everything OK
    Transfer (IDocs and TRFC): Errors occurred
          Request IDoc : Application document posted
          Info IDoc 2 : Application document posted
          Info IDoc 1 : Application document posted
          Info IDoc 4 : Application document posted
          Info IDoc 3 : Application document posted
          Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
    Processing (data packet): Errors occurred
          Update PSA ( 2462  Records posted ) : No errors
          Transfer Rules ( 2462  -> 2462  Records ) : No errors
          Update rules ( 2462  -> 2462  Records ) : No errors
          Update ( 0 new / 0 changed ) : Errors occurred
          Processing end : Errors occurred
    I'm totally new to this issue. please help to solve this error.
    Regards,
    Saran

    Hi,
    I think you are facing an invalid character issue.
    This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
    I will add the step by step procedure to edit PSA data and update into target (request based).
    In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
    Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
    Identifying incorrect records.
    System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
    1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
    2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
    3. Then you can go to PSA and filter using the incorrect records based on the particular field.
    4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
    If you want to confirm find the PSA table and search manually."
    Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
    Steps to resolve this
    1. Force the request to red in RSMO > Status tab.
    2. Delete the request from target.
    3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
    4.Edit the record
    5. Save PSA data.
    6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
    Refer how to Modify PSA Data
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
    This should solve your problem for now.
    As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
    RSKC --> type ALL_CAPITAL --> F8 (Execute)
    OR
    Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
    Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
    Refer
    /people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
    /people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
    /people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
    http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
    For adding Other characters
    OSS note #173241 – “Allowed characters in the BW System”
    Thanks,
    JituK
    Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

  • Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")

    I activated all 0* objects in BTMP  and checked that they are all activated, but I found errors when opening the BEx Web Analyzer
    Error messages :
    Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")
    ERROR: Command type SWITCH_AXES of object not recognized
    ERROR: Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
    So I ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version D report to check and choose validate.
    Error messages :
    Template Include Item HEADER_TEMPLATE unresolved or empty. Close and reopen template.     
    Template Include Item FOOTER_TEMPLATE unresolved or empty. Close and reopen template.          
    Width of object item:GROUP_ITEM:GROUP_ITEM_1 is very small (1amp;1)          
    Query  does not exist in the BI System (Object QU )
    Cannot instantiate data provider
    I also ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version A and got the following errors:
    Command type SWITCH_AXES of object  not recognized
    Command type SWITCH_AXES of object  not recognized
    Command type SWITCH_AXES of object  not recognized
    Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
    Parameter GENERAL_TEXT_ELEMENT of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
    Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
    Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
    Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
    Command SWITCH_AXES cannot be located in parameter ACTION
    Command SWITCH_AXES cannot be located in parameter ACTION
    Command SWITCH_AXES cannot be located in parameter ACTION
    Parameter GENERIC_TEXT_BINDING of object item:GROUP_ITEM:GROUP_ITEM_1 cannot be higher-level node of GENERAL_TEXT_ELEMENT
    Item item:GROUP_ITEM:GROUP_ITEM_1 of type DROPDOWN_ITEM cannot be a parent node of DATA_PROVIDER_REF
    Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of VISIBLE
    Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_POSITION
    Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_VISIBLE
    Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_ONLY
    Invalid parameter value  for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
    Invalid parameter value  for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
    Invalid parameter value  for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
    bi-Tag bi:item has unknown attribute key. Please check your spelling
    bi-Tag bi:item has unknown attribute key. Please check your spelling
    bi-Tag bi:item has unknown attribute key. Please check your spelling
    bi-Tag bi:item has unknown attribute key. Please check your spelling
    What could be the problem?

    hi,
      Please look into this note let me it helps...url=https://websmp202.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=917950&_NLANG=E]Note 917950 - SAP NetWeaver 2004s: Setting Up BEx Web[/url]
    check this link as well for [<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ca6de811-0c01-0010-43b2-c64584eef943">Bex Web Configuration</a>
    wht is the SP Level?
    Nagesh Ganisetti.

  • Error while loading SAP Portal

    Can anybody help me to resolve the issue of installation of SAP Portal. This is a fresh installation and I got the following error while installing the portal.
    I will appreciate any body who helps me to resolve the issue.
    Info: Begin of log messages of the target system:
    10/10/21 19:52:31 -  ***********************************************************
    10/10/21 19:52:32 -  Start updating EAR file...
    10/10/21 19:52:32 -  start-up mode is lazy
    10/10/21 19:52:32 -  EAR file updated successfully for 109ms.
    10/10/21 19:52:32 -  Start deploying ...
    10/10/21 19:52:32 -  EAR file uploaded to server for 79ms.
    10/10/21 19:52:32 -  ERROR: Not deployed. Deploy Service returned ERROR:
                         java.rmi.RemoteException: Cannot deploy application sap.com/com.sapportals.dqe.beans..
                         Reason: Exception during generation of components of application sap.com/com.sapportals.dqe.beans in container EJBContainer.; nested exception is:
                              com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception during generation of components of application sap.com/com.sapportals.dqe.beans in container EJBContainer.
                              at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:477)
                              at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
                              at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:291)
                              at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:183)
                              at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:119)
                              at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
                              at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
                              at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
                              at java.security.AccessController.doPrivileged(Native Method)
                              at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
                              at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
                         Caused by: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception during generation of components of application sap.com/com.sapportals.dqe.beans in container EJBContainer.
                              at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:609)
                              at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:365)
                              at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:296)
                              at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:290)
                              at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:321)
                              at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3028)
                              at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:462)
                              ... 10 more
                         Caused by: java.lang.NoClassDefFoundError: com/metamatrix/platform/service/api/exception/ServiceException
                              at java.lang.Class.getDeclaredConstructors0(Native Method)
                              at java.lang.Class.privateGetDeclaredConstructors(Class.java:1618)
                              at java.lang.Class.getConstructors(Class.java:865)
                              at com.sap.engine.services.ejb.deploy.verifier.BeanClassCheck.check(BeanClassCheck.java:33)
                              at com.sap.engine.services.ejb.deploy.verifier.session.SessionBeanCheck.check(SessionBeanCheck.java:51)
                              at com.sap.engine.services.ejb.deploy.verifier.Verifier.checkBean(Verifier.java:82)
                              at com.sap.engine.services.ejb.deploy.verifier.Verifier.check(Verifier.java:46)
                              at com.sap.engine.services.ejb.deploy.DeployAdmin.generate(DeployAdmin.java:258)
                              at com.sap.engine.services.ejb.EJBAdmin.deploy(EJBAdmin.java:2057)
                              at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:594)
                              ... 16 more
                         For detailed information see the log file of the Deploy Service.
    10/10/21 19:52:32 -  ***********************************************************
    Info: End of log messages of the target system.
    Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
    Error: Aborted: development component 'com.sapportals.dqe.beans'/'sap.com'/'SAP AG'/'609.20041012204607.0000':
    Caught exception during application deployment from SAP J2EE Engine's deploy service:
    java.rmi.RemoteException: Cannot deploy application sap.com/com.sapportals.dqe.beans..
    Reason: Exception during generation of components of application sap.com/com.sapportals.dqe.beans in container EJBContainer.; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception during generation of components of application sap.com/com.sapportals.dqe.beans in container EJBContainer.
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
    Info: SDM configuration: Do not automatically start/stop J2EE Engine. Do not restore state of J2EE Engine now.
    Error: -
    At least one of the Deployments failed -
    Info: Summarizing the deployment results:
    Error: Aborted: G:\SoftWare\netweaver\Identified\SAPNETWEAVER041DVD_ADDON\EP-KMC\DQE\SDA\J2EE\com.sapportals.dqe.beans.ear
    Processing error. Return code: 4
    Error: Processing error. Return code: 4
    ERROR 2010-10-21 19:52:33
    MUT-02041  SDM call of deploySdaList ends with returncode 4. See output of logfile C:\Program Files\sapinst_instdir\NW04SR1\EP\EP\callSdmViaSapinst.log.

    Hi,
    I believe VISTA is not a recomended OS for SAP Portal, I tried for a week to install and finally gave up
    check this
    Adventures with NetWeaver Portal 7 - Vista Installation
    jo
    Edited by: Ravi Joseph on Dec 12, 2008 11:51 AM

  • Error while loading the planning book

    Hi There,
    I am getitng the below error while loading the data in planning book
    "Error for COM routine using application program (return code 40,016)
    Error reading data - Planning book cannot be processed further"
    Ran  /SAPAPO/TS_LCM_CONS_CHECK and /SAPAPO/TS_LCM_REORG but its not working , still getting the same error.
    Could you please advise?
    Thanks,
    Krishna

    Hi Krishna,
    Looks like a key figure might be incorrectly created or there might be a problem in aggregation/disaggregation of key figures due to numerous number of CVCs.
    Regards
    JB

  • Error while Loading the WSDL

    Hi,
    Getting error while loading the WSDL in Browser.Mentioned below is the link which trying to load.
    http://10.162.32.113/DNBDAASEXCMDL4/AdapterProductService?wsdl
    The XML page cannot be displayed
    Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
    A string literal was not closed. Error processing resource 'http://10.162.32.113/DNBDAASEXCMDL4/AdapterProductService?wsdl'...
    <xs:element name="POST_CODE" type="a
    Please can any one help on this.

    That's no problem with the wsdl, it's the browser that's not able to show the xml, try on firefox or try using "show page source"...

  • Error while loading the WSLD file

    Hi all
    I am trying to consume a Webservice. When i try to create the Model out of the WSDL file, it says "Error while loading the WSDL file".
    Its an XI webservice, so i cannot view it from Webservice navigator.
    How could i find out that, the problem is with the Webservice or i am missing any thing
    Kindly help
    regards
    Deepu

    Hi
    I checked the log and i am getting the following exceptions
    1.DynamicProxy.TempDir=C:\DOCUME1\DEEPUM1\LOCALS~1\Temp\, DynamicProxy.INetProxy.Host=}'
         at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:413)
    Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.WebserviceClientException: GenericServiceFactory initialization problem. Could not load web service model.
    2. Caused by: com.sap.engine.lib.xml.util.NestedException: IO Exception occurred while parsing file:Invalid Response Code: (401) Unauthorized. The requested URL was:"http://Pinnacle:50000/XISOAPAdapter/MessageServlet?channel=:PowerEP_BusService:Out_SOAP_DocViewDownload" -> com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL
    3. java.lang.NullPointerException
         at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DOperationImpl.initParameters_DocumentStyle(DOperationImpl.java:59)
    Is this any authorization problem
    regards
    Deepu

  • Using FF to access my AOL emails I get "There was an error while loading the message. Please try again later." Access is OK via Chrome, IE & AOL's own desktop.

    "There was an error while loading the message. Please try again later." is a recent (3/4 days) error message I get when accessing my AOL emails. I can access the page and move them between states but cannot open them to read. Chrome, IE and AOL's own desktop open emails OK & can access them from the wife's PC using my AOL details. Have cleaned the history tab of everything in FF, have also removed it with add/rem progs and reinstalled - still I get the above message.
    PC - W7 Pro 64 bit, 16GB RAM etc.

    Hello,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!
    Thank you.
    <!-- VERY important to include-->
    <b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>

  • Getting Duplicate data Records error while loading the Master data.

    Hi All,
    We are getting Duplicate data Records error while loading the Profit centre Master data. Master data contains time dependent attributes.
    the load is direct update. So i made it red and tried to reloaded from PSA even though it is throwing same error.
    I checked in PSA. Showing red which records have same Profit centre.
    Could any one give us any suggestions to resolve the issues please.
    Thanks & Regards,
    Raju

    Hi Raju,
            I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since  time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
    Hope this helps you.
    Thanks & Regards,
    Nithin Reddy.

  • Error while loading the runtime repository via HTTP

    Hi Experts,
    I am trying to delete an enhancement and when I enter the component name and the enhancement set in BSP_WD_CMPWB. I get the following error when right click the enhanced view and select delete : Error while loading the runtime repository via HTTP. How do I delete this enhancement?
    Regards
    Abdullah Ismail.

    if for some reason the runtime repository is not coherent, you get an error each time you try to read it (and this is the case when you open a component using the transaction BSP_WD_CMPWB)
    this is because the XML file is interpreted by a CALL TRANSFORMATION statement, and any incorrect node will raise an uncaught exception
    solution:
    enhanced view is contained into BSP application you have created the first time you enhanced the component
    go to SE80 and enter the BSP application where your objects are stored (the name you provided the first time)
    there you can modify directly the objects, including the runtime repository which is stored under node "Pages with flow Logic"
    once the correction is done, you can access again your component through transaction BSP_WD_CMPWB (and delete it properly if this is what you want to do)

  • There was an error while loading the message. Please try again later. get this when trying to open emails

    from today only when i try to open my emails i get the following message
    There was an error while loading the message. Please try again later.
    I did a restore earlier and not worked since then i ues Aol but have never had a problem before someone please help

    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!

  • Error while loading the data from text file

    Hi,
    I got an error " Data Value Encountered before all Dimensions selected" while loading the data from the text file.
    Can any one please suggest me the solution.

    Possible Solutions
    Make sure that the data source is valid.
    Is a member from each dimension specified correctly in the data source or rules file?
    Is the numeric data field at the end of the record? If not, move the numeric data field in the data source or move the numeric data field in the rules file.
    Are all members that might contain numbers (such as "100") enclosed in quotation marks in the data source?
    If you are using a header, is the header set up correctly? Remember that you can add missing dimension names to the header.
    Does the data source contain extra spaces or tabs?
    Has the updated outline been saved?

  • Error while loading the data

    Hi,
    We are trying to copy data from one cube to another(it's exact copy). There are more than 11 million records so we have used calendar month as filter and divided the data in to many parts.
    While loading the first request to the target cube, it failed resulting in a short dump. I checked in ST22 and it showed "Runtime Errors DBIF_RSQL_SQL_ERROR , Exception CX_SY_OPEN_SQL_DB" and I also found a message "ORA-00060: deadlock detected while waiting for resource" in the description of the Short Dump.
    I found many threads here relevant to this exact issue but the only solution that I could find is to include a delete index and create index process in the chain before and after the data load process to the target cube. In our case, the target cube has no data and this would be the first request to the cube so there is no need to delete index in the first place but still the data load is failing.
    For each load there are 50 data packages and 50k records for each packages. Only one or two packages have failed. Is there any way to recover only these two separatly instead of deleting the whole request and repeating the process.
    If you have encountered a similar issue or if you have any suggestions, Please do help.
    Thanks..

    Hi,
    Can you see which data packages have RED status? Click on the live of the RED data package, and you have to find an ICON with update manually, or go to MENU -> REQUEST -> POST MANUALLY.
    if you are lucky, it helps. Do not forget that this runs in DIALOG process, so don't leave BREAK.POINT in your transformation.
    If you need any help, please let me know.
    (The DEADLOCK problem: change the DTP BATCH setting, because it has problem with paralel loading, and there os a database deadlock. I suggest you to load in one process so: open DTP. after it, go to GOTO menu -> SETTINGS FOR BATCH MANAGER -> NUMBER OF PROCESSES, overwrite with 1. With that, deadlock may not occur.)
    Regards,
    Laszlo

  • 'Overlapping Time Intervals' error while loading the Master Data

    Guys,
              Need you help with this. I am trying to load the Master Data (attribute) for InfoObject 0FMD_FRSITM using DTP from DataSource 0FMD_FRSITM_ATTR and am getting an error 'Overlapping Time Intervals'.
    This is happening due to overlapping Valid From/Valid To date's for the same Financial Statement Item (0FMD_FRSITM) with different Editions.
    If I select the option 'Ignore Duplicate Records' while loading the data, it is successful. But not all the records are loads and Editions are missing.
    Below is an example of how the data looks like.
    FRSITM         Valid To                  Valid From                 Edition
    1001             12/31/9999             04/01/2010                2010.1.1
    1001             01/31/2010             03/01/2010                2010.1.2
    1001             12/31/9999             02/01/2010                2010.1.3
    In the above scenario, the Valid To Data for record 1 and record 3 is the same (12/31/9999) and the record 3 is being ignore when I select the option 'Ignore Duplicate Records'.
    And also I see that the Edition is not the Key Field.
    Any suggestions or ideas? Appreciate your help.
    Thanks.

    FRSITM Valid To Valid From Edition
    1001 12/31/9999 04/01/2010 2010.1.1
    1001 01/31/2010 03/01/2010 2010.1.2
    1001 12/31/9999 02/01/2010 2010.1.3
    1. While selecting ignore duplicate, make sure to-date is not part of symantic key.
    2. if system comes across two same records it picks up the latest one.
    3. It shall merge the timelines is overlap is found.
    4. I hope Edition is time dependent attribute
    I believe infoobjet key is FRSITM Valid To.
    In your case because first record has more period and may be the latets record system ignore the earlier one with the same time interval.
    have a look at Q table and you shall be able to figure out for your self.
    Hope it helps
    Vikash

  • Records was deleted at R/3 sys - getting error while loading the data

    Hi All,
    we are extracting the data from 2LIS_12_VCITM, 2LIS_11_VASCL, 2LIS_11_V_ITM, 2LIS_13_VDITM and 2LIS_11_VAITM into Cube RSD_C03. But one record (Sales Order) was deleted at R/3 system so we getting the error message that Caller 09 contains an error message while loading the data from 2LIS_12_VCITM.
    we have replicate the DataSource and activate Trans rules but no use still getting the same error.
    when we execute the data source  2LIS_12_VCITM at RSA3 with update mode as D (Transfer of the deltas since the last request)getting error message that Errors occurred during the extraction
    and we are getting the zero records at RSA3 for the 2LIS_12_VCITM as update mode as F (Transfer of all requested data)
    And getting shot dump that TSV_TNEW_PAGE_ALLOC_FAILED at BW side.
    Could you kindly suggest me any one how to rectify this error.
    Thanks in Advance,
    Shaliny. M

    hai Lilly
    I activated myself source system  and replicate the my datasource .
    Then activate the update rules for ODS , InfoCube and InfoCube .
    Then i tried to load the data into InfoCube from ODs .
    Again im getting same problem .
    why it is like that
    pls tell me
    rizwan

Maybe you are looking for