Error while loading to active data table in DSO
Hi,
please help me in resolving the issue with active data table . when i am activating the new data table the job gets cancelled with message as 'Error when assigning SID: Action VAL_SID_CONVERT table OCALMONTH'.
Thanks and Regards,
Prasad.
Hi,
In the displaying error message tab of ODS activation, you will get error message and invalid value for the 0CALMONTH will be displayed. Search the NEW TABLE of ODS with the same value, identify the error records.
If you have PSA in the flow, delete (w/o making the status RED), correct data in PSA and reconstruct the data.
If you don't have PSA, you have to delete by making red, reload through PSA correcting the erroneous data in PSA.
Regards
Chandu
Similar Messages
-
Data is not Loading into Active data table on DSO in BI 7.0
Hi,
Iam loading data from a flat file to ODS in BI 7.0, the data is loading up to PSA and New data table , But the DSO is not activating, after all possible steps like, automatically setting/ manualy doing / through Process Chain....still unable to do it....Cud u pls tell the reason and solution.Hi Sri,
Did you get any solution for this issue. Your input is highly appreciated.
We are also running on the same boat, I am using the End-Routine to fill up the 2 fields (one is Key figure and Characteristics) from one DSO to the other. In my case along with all other fields this key figure is also populating before and after the Activation of DSO. But the new Characteristics is populating in the update table (/BIC/A***40) before activating the DSO, once I activated the DSO the new characteristics is not filling up in the (/BIC/A***00), rest are coming without issues.
I built the same logic for other current data DSO (write optimized) from other DSO to fill the same fields with the similar logic in the end routine, it is up and running without any issues.
Thanks,
Dileep -
Error while loading service SLD Data Supplier
HI All,
I am getting an error when i am trying to access the SLD Data Supplier via Visual Administrator.
Error while loading service SLD Data Supplier
java.lang.ClassNotFoundException: com.sap.sldserv.vaclient.ClientManagement
Can somebody tell me how to fix this?
Regards
PrakashHi Nigel,
thanks a lot - I can now access the SLD data supplier from my local visual admin- great!
unfortunately, the key storage service still throws the error:
java.lang.NoClassDefFoundError: iaik/x509/V3Extension
at com.sap.engine.services.keystore.admin.gui.KeystoreContentPanel.<init>(KeystoreContentPanel.java:34)
at com.sap.engine.services.keystore.admin.gui.SingleKeystoreViewPanel.<init>(SingleKeystoreViewPanel.java:31)....
Do you know if it's something different with the key storage?
Best regards
Cornelia -
Error while loading Reported Financial Data from Data Stream
Hi Guys,
I'm facing the following error while loading Reported Financial Data from Data Stream:
Message no. UCD1003: Item "Blank" is not defined in Cons Chart of Accts 01
The message appears in Target Data. Item is not filled in almost 50% of the target data records and the error message appears.
Upon deeper analysis I found that Some Items are defined with Dr./Cr. sign of + and with no breakdown. When these items appear as negative (Cr.) in the Source Data, they are not properly loaded to the target data. Item is not filled up, hence causing the error.
For Example: Item "114190 - Prepayments" is defined with + Debit/Credit Sign. When it is posted as negative / Credit in the source data, it is not properly written to the target.
Should I need to define any breakdown category for these items? I think there's something wrong with the Item definitions OR I'm missing something....
I would highly appreciate your quick assistance in this.
Kind regards,
AmirFound the answer with OSS Note: 642591.....
Thanks -
Getting Duplicate data Records error while loading the Master data.
Hi All,
We are getting Duplicate data Records error while loading the Profit centre Master data. Master data contains time dependent attributes.
the load is direct update. So i made it red and tried to reloaded from PSA even though it is throwing same error.
I checked in PSA. Showing red which records have same Profit centre.
Could any one give us any suggestions to resolve the issues please.
Thanks & Regards,
RajuHi Raju,
I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
Hope this helps you.
Thanks & Regards,
Nithin Reddy. -
'Overlapping Time Intervals' error while loading the Master Data
Guys,
Need you help with this. I am trying to load the Master Data (attribute) for InfoObject 0FMD_FRSITM using DTP from DataSource 0FMD_FRSITM_ATTR and am getting an error 'Overlapping Time Intervals'.
This is happening due to overlapping Valid From/Valid To date's for the same Financial Statement Item (0FMD_FRSITM) with different Editions.
If I select the option 'Ignore Duplicate Records' while loading the data, it is successful. But not all the records are loads and Editions are missing.
Below is an example of how the data looks like.
FRSITM Valid To Valid From Edition
1001 12/31/9999 04/01/2010 2010.1.1
1001 01/31/2010 03/01/2010 2010.1.2
1001 12/31/9999 02/01/2010 2010.1.3
In the above scenario, the Valid To Data for record 1 and record 3 is the same (12/31/9999) and the record 3 is being ignore when I select the option 'Ignore Duplicate Records'.
And also I see that the Edition is not the Key Field.
Any suggestions or ideas? Appreciate your help.
Thanks.FRSITM Valid To Valid From Edition
1001 12/31/9999 04/01/2010 2010.1.1
1001 01/31/2010 03/01/2010 2010.1.2
1001 12/31/9999 02/01/2010 2010.1.3
1. While selecting ignore duplicate, make sure to-date is not part of symantic key.
2. if system comes across two same records it picks up the latest one.
3. It shall merge the timelines is overlap is found.
4. I hope Edition is time dependent attribute
I believe infoobjet key is FRSITM Valid To.
In your case because first record has more period and may be the latets record system ignore the earlier one with the same time interval.
have a look at Q table and you shall be able to figure out for your self.
Hope it helps
Vikash -
Error while loading to Master data attribute 0product
Hi experts,
While loading the data from 0material to 0product master data attribute i am getting a error ' 0MATERIAL : Data record 2421 (''300000072 '):Version '300000072 ' is not valid. I request u all to help me to solve this error.
Diagnosis
Data record 2421 & with the key '300000072 &' is invalid in value
'300000072 &' of the attribute/characteristic 0MATERIAL &.
System Response
The system has recognized that the value mentioned above is invalid, and
has processed this general error message. A subsequent message may give
you more information on the error. This message refers to the same
value, even though it does not state this explicitly.
Procedure
If this message appears during a data load, maintain the attribute in
the PSA maintenance screens. If this message appears in the master data
maintenance screens, leave the transaction and call it again. This
allows you to maintain your master data.
Please let me know what could be the problem....
Regards,
Prashanth
Edited by: Prashanth Shetty on Jul 16, 2008 7:42 AMHi,
The issue is due to errorneous record.
Delete the request in Master data and Try the following.
1) Goto PSA --> filter the Status (Red or Green)
Select the Red records and correct the data in which error is throwm.
After correcting the data, save and Right click PSA and give Start update immediately.
2) Load via Infopackage only to PSA and later update from PSA and check.
Any one of the above 2 methods will solve the issue.
Regards,
Balaji V -
Hi All,
I have an issue while loading the data from psa to master data infoobject.
DTP Error:
When we had extracted the data from ECC to PSA, the values for field "IOBJNM" are not populated for 0RPM_PORT_ITEM_HIERARCHY
Thus it is throwing an error while populating this data to the target.
From where this field will fetch the values?
Why these values are not being populated from ECC?
Will there be any issue from BI side? can anyone help me on this.Hi Raman,
yes I had extracted data in RSA3
There are no values for the field "object".
Do you have any idea why these values are missing? -
Error while loading material master data
I am loading delta data for material master and its giving me the following error:
"Programs not generated for InfoSource 0MATERIAL_ATTR and source system".
How to resolve this error?
Need ur help urgently.
ThanksHi,
While loading attributes U have to select the transfer structure of the 0MATERIAL_ATTR then activate it..now proceed if it is already replicated in to BW system... other wise first do that..then go ahead....Similar to Text also...
Regards
Siddhu -
Error while loading the master data into hierarchy
Hi,
When i am trying to load the master data into a hierarchy, it is showing me the following error.
"Invalid Entry, hierarchy xxxxxx does not exist".
Can you please tell me what might be the possible cause for this error.
Thanks,
PrateekHello
Have you created a hierarchy, I mean go to Transfer structure->Hierarchy structure
->create hierarchy, put a check of whether it is sorted or time dependent etc. after that while loading data through infopackage just check that you have selected an appropriate hierarchy name in hierarchy selection tab.
Hope it will help!!
Regards,
Sandeep -
Error while loading customer master data through Idoc (DEBMAS) from BODS
Hi All,
I am trying to load customer master data from BODS to SAP ECC through IDOC(DEBMAS). The jobs run successfully but IDOC is not getting posted. Please find the error below.
I checked in TSKD table the entry 0 is present. Please help me to resolve this issue.
Thanks & Regards,
Balamurugan GHi, did you referred this link : Error during customer master mass update through XD99
-
Error while loading the transaction data ..
Hello Expert
I need your help in resolving this error, I have encountered this below error while uploading transaction data from the cube 0PP_C14 even though my transformation file is giving the accepted record
/CPMB/MODIFY completed in 0 seconds
/CPMB/INFOPROVIDER_CONVERT completed in 0 seconds
/CPMB/CLEAR completed in 0 seconds
[Selection]
InforProvide = 0PP_C14
SELECTION = <?xml version="1.0" encoding="utf-16"?><Selections xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><Selection Type="Selection"><Attribute><ID>0EXTMATLGRP</ID><Operator>1</Operator><LowValue>NAFS-DESIGNER
</LowValue><HighValue /></Attribute><Attribute><ID>0EXTMATLGRP</ID><Operator>1</Operator><LowValue>NAFS-PLANK
</LowValue><HighValue /></Attribute><Attribute><ID>0EXTMATLGRP</ID><Operator>1</Operator><LowValue>NAFS-HALF-WIDTH
</LowValue><HighValue /></Attribute><Attribute><ID>0EXTMATLGRP</ID><Operator>1</Operator><LowValue>NAFS-NON-STD-WIDTH
</LowValue><HighValue /></Attribute><Attribute><ID>0EXTMATLGRP</ID><Operator>1</Operator><LowValue>NAFS-RECESS
</LowValue><HighValue /></Attribute><Attribute><ID>0EXTMATLGRP</ID><Operator>1</Operator><LowValue>NAFS-STD-WIDTH
</LowValue><HighValue /></Attribute><Attribute><ID>0BASE_UOM</ID><Operator>1</Operator><LowValue>4FT</LowValue><HighValue /></Attribute><Attribute><ID>0PLANT__0SALESORG</ID><Operator>1</Operator><LowValue>SILD</LowValue><HighValue /></Attribute><Attribute><ID>0PLANT__0SALESORG</ID><Operator>1</Operator><LowValue>SILE</LowValue><HighValue /></Attribute></Selection><Selection Type="FieldList"><FieldID>0EXTMATLGRP</FieldID><FieldID>0FISCPER</FieldID><FieldID>0PLANT</FieldID><FieldID>0PLANT__0SALESORG</FieldID></Selection></Selections>
TRANSFORMATION = \ROOT\WEBFOLDERS\SIL\MIS\DATAMANAGER\TRANSFORMATIONFILES\COST SHEET\0PP_C14_FOR_DOMESTICS_EXPORT.xls
TARGETMODE = Yes
RUNLOGIC = No
CHECKLCK = No
[Message]
Task name CONVERT:
No 1 Round:
An exception with the type CX_ST_MATCH_TYPE occurred, but was neither handled locally, nor declared in a RAISING clause
System expected a value for the type g
model: MIS. Package status: ERROR
Any one has the solution of it ..?Hi,NEERAJ DEPURA
I think it is caused by incorrect character entries you made in the 'set selection'
screen when you filtering data.
Because I was able to reproduce the error in the way below:
1, I changed my input language to Chinese.
2,In the 'set selection'screen,I selected '0company_code’ as the attribute ,operater is ‘=’,
and enter the value ‘SGA01’.
3,Saved the selection and ran the package. it failed with the same error as you got.
In my cube the value ‘SGA01’ is in English so in the ‘set selection’ screen if it is
entered in Chinese ,a mismatch will occur and result in the error.
If I change my input language to English and enter the valune ‘SGA01’ again in the ‘set
selection’screen,the error won’t occur.
Please check your entered values in the ‘set selection’screen.
Hope it solves your issue -
Error while loading 0Plant master data in PSA
Hi,
i am trying to load attributes master data for 0PLANT, but in PSA i get the following error:
<i><b>'Record 1 :Plant CU : No sales organization found; Local currency cannot be checked'</b> .</i>
We are not using SD module and so no sales organization data is maintained have through a couple of posts posted here in SDN,and have applied the correction instructions manually as stated in OSS note : 750322.(As mentioned for case 3). But i still get the same error.Hi,
The issue is due to errorneous record.
Delete the request in Master data and Try the following.
1) Goto PSA --> filter the Status (Red or Green)
Select the Red records and correct the data in which error is throwm.
After correcting the data, save and Right click PSA and give Start update immediately.
2) Load via Infopackage only to PSA and later update from PSA and check.
Any one of the above 2 methods will solve the issue.
Regards,
Balaji V -
Getting the error while loading the master data
Hi
i have tried to delete the master data using right click and delete master data, but still there are data.
Now i am trying to load this master data again then i am getting the message "0 from 50033 records"
and data load got failed with error message "master data/text of 0vendor already deleted "
and due to this i could not able to load my other infoprovider (which have 0 vendor).
can any body help me, it very urgent...
thanks and regards
AnupamHi Raju,
I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
Hope this helps you.
Thanks & Regards,
Nithin Reddy. -
Error while loading the master data
Hi Masters,
When I tried to load the master data, data was not loaded. Monitor tells, in YELLOW color (0 records from 0). Status telling following things
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Could you please help me...
Thanks & Regards
Raja.SHi,
Check the TRFC log.
You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Removing errors:
If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.
Resolutions:
Reload the Master Data manually again from Info-package at RSA1.
Maybe you are looking for
-
Column Headers - Can't Change Text Orientation
In Excel I am able to change the column header row text orientation so that I can have long text headers for both my rows and columns. With pages, my text can only be horizontal, which make a spread sheet with long column names very wide, even though
-
When i am trying to install the libstdc++-devel-4.1.2-46.el5.i386.rpm on Oracle Enterprise Linux server 5.4 (64BIT) OS, i am getting the following error: # rpm -ivh libstdc++-devel-4.1.2-46.el5.i386.rpm error: Failed dependencies: libstdc++ = 4.1.2-4
-
GDM cannot login after logging out.
I have configured autologin for my account. It works when I restart/startup. But when I logout, and try re-login (with my account configured for autologin), it "hangs" for awhile then goes back to use selection, just like described in https://bbs.arc
-
I've re-installed to try putting all files back in place/overwrite the lingering file hoping that with another uninstall it would take all the files including whatever causes the error. In App Data Local/Roaming I've deleted the folders AMozilla afte
-
Moving to iCloud - stuck on "Moving Mail"
Hi everyone, I am moving from mobileme to iCloud tonight, and in the transition step online, it says "moving mail." It's been stuck on this stage for over an hour. Is this normal? I close the window and try again, and it always get's stuck on this