Error while loading to Master data attribute 0product

Hi experts,
While loading the data from 0material to 0product master data attribute i am getting a error ' 0MATERIAL : Data record 2421 (''300000072 '):Version '300000072 ' is not valid. I request u all to help me to solve this error.
Diagnosis
    Data record 2421 & with the key '300000072 &' is invalid in value
    '300000072 &' of the attribute/characteristic 0MATERIAL &.
System Response
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This
    allows you to maintain your master data.
Please let me know what could be the problem....
Regards,
Prashanth
Edited by: Prashanth Shetty on Jul 16, 2008 7:42 AM

Hi,
   The issue is due to errorneous record.
Delete the request in Master data and Try the following.
1) Goto PSA --> filter the Status (Red or Green)
Select the Red records and correct the data in which error is throwm.
After correcting the data, save and Right click PSA and give Start update immediately.
2) Load via Infopackage only to PSA and later update from PSA and check.
Any one of the above 2 methods will solve the issue.
Regards,
Balaji V

Similar Messages

  • 'Overlapping Time Intervals' error while loading the Master Data

    Guys,
              Need you help with this. I am trying to load the Master Data (attribute) for InfoObject 0FMD_FRSITM using DTP from DataSource 0FMD_FRSITM_ATTR and am getting an error 'Overlapping Time Intervals'.
    This is happening due to overlapping Valid From/Valid To date's for the same Financial Statement Item (0FMD_FRSITM) with different Editions.
    If I select the option 'Ignore Duplicate Records' while loading the data, it is successful. But not all the records are loads and Editions are missing.
    Below is an example of how the data looks like.
    FRSITM         Valid To                  Valid From                 Edition
    1001             12/31/9999             04/01/2010                2010.1.1
    1001             01/31/2010             03/01/2010                2010.1.2
    1001             12/31/9999             02/01/2010                2010.1.3
    In the above scenario, the Valid To Data for record 1 and record 3 is the same (12/31/9999) and the record 3 is being ignore when I select the option 'Ignore Duplicate Records'.
    And also I see that the Edition is not the Key Field.
    Any suggestions or ideas? Appreciate your help.
    Thanks.

    FRSITM Valid To Valid From Edition
    1001 12/31/9999 04/01/2010 2010.1.1
    1001 01/31/2010 03/01/2010 2010.1.2
    1001 12/31/9999 02/01/2010 2010.1.3
    1. While selecting ignore duplicate, make sure to-date is not part of symantic key.
    2. if system comes across two same records it picks up the latest one.
    3. It shall merge the timelines is overlap is found.
    4. I hope Edition is time dependent attribute
    I believe infoobjet key is FRSITM Valid To.
    In your case because first record has more period and may be the latets record system ignore the earlier one with the same time interval.
    have a look at Q table and you shall be able to figure out for your self.
    Hope it helps
    Vikash

  • Getting Duplicate data Records error while loading the Master data.

    Hi All,
    We are getting Duplicate data Records error while loading the Profit centre Master data. Master data contains time dependent attributes.
    the load is direct update. So i made it red and tried to reloaded from PSA even though it is throwing same error.
    I checked in PSA. Showing red which records have same Profit centre.
    Could any one give us any suggestions to resolve the issues please.
    Thanks & Regards,
    Raju

    Hi Raju,
            I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since  time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
    Hope this helps you.
    Thanks & Regards,
    Nithin Reddy.

  • Getting the error while loading the master data

    Hi
    i have tried to delete the master data using right click and delete master data, but still there are data.
    Now i am trying to load this master data again then i am getting the message "0 from 50033 records"
    and data load got failed with error message "master data/text of 0vendor already deleted "
    and due  to this i could not able to load my other infoprovider (which have 0 vendor).
    can any body help me, it very urgent...
    thanks and regards
    Anupam

    Hi Raju,
            I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since  time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
    Hope this helps you.
    Thanks & Regards,
    Nithin Reddy.

  • Error while loading the master data into hierarchy

    Hi,
    When i am trying to load the master data into a hierarchy, it is showing me the following error.
    "Invalid Entry, hierarchy xxxxxx does not exist".
    Can you please tell me what might be the possible cause for this error.
    Thanks,
    Prateek

    Hello
    Have you created a hierarchy, I mean go to Transfer structure->Hierarchy structure 
    ->create hierarchy, put a check of whether it is sorted or time dependent etc. after that while loading data through infopackage just check that you have selected an appropriate hierarchy name in hierarchy selection tab.
    Hope it will help!!
    Regards,
    Sandeep

  • Error while loading  the master data

    Hi Masters,
              When I tried to load the master data, data was not loaded. Monitor tells, in YELLOW color (0 records from 0). Status telling following things
    Diagnosis
    No errors could be found. The current process has probably not finished yet.
    System response
    The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
    and/or
    the maximum wait time for this request has not yet run out
    and/or
    the batch job in the source system has not yet ended.
    Current status
    No Idocs arrived from the source system.
    Could you please help me...
    Thanks & Regards
    Raja.S

    Hi,
    Check the TRFC log.
    You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
    Removing errors:
    If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.
    Resolutions:
    Reload the Master Data manually again from Info-package at RSA1.

  • Error while loading customer master data through Idoc (DEBMAS) from BODS

    Hi All,
    I am trying to load customer master data from BODS to SAP ECC through IDOC(DEBMAS). The jobs run successfully but IDOC is not getting posted. Please find the error below.
    I checked in TSKD table the entry 0 is present. Please help me to resolve this issue.
    Thanks & Regards,
    Balamurugan G

    Hi, did you referred this link : Error during customer master mass update through XD99

  • Error while loading material master data

    I am loading delta data for material master and its giving me the following error:
    "Programs not generated for InfoSource 0MATERIAL_ATTR and source system".
    How to resolve this error?
    Need ur help urgently.
    Thanks

    Hi,
    While loading attributes U have to select the transfer structure of the 0MATERIAL_ATTR then activate it..now proceed if it is already replicated in to BW system... other wise first do that..then go ahead....Similar to Text also...
    Regards
    Siddhu

  • Error while loading  0Plant master data in PSA

    Hi,
    i am trying to load attributes master data for 0PLANT, but in PSA i get the following error:
    <i><b>'Record 1 :Plant CU : No sales organization found; Local currency cannot be checked'</b> .</i>
    We are not using SD module and so no sales organization data is maintained have through a couple of posts  posted here in SDN,and have applied the correction instructions manually as stated in OSS note : 750322.(As mentioned for case 3). But i still get the same error.

    Hi,
       The issue is due to errorneous record.
    Delete the request in Master data and Try the following.
    1) Goto PSA --> filter the Status (Red or Green)
    Select the Red records and correct the data in which error is throwm.
    After correcting the data, save and Right click PSA and give Start update immediately.
    2) Load via Infopackage only to PSA and later update from PSA and check.
    Any one of the above 2 methods will solve the issue.
    Regards,
    Balaji V

  • Error while loading to master data infoobject hierarchy (0RPM_PORT_ITEM_HIERARCHY)

    Hi All,
    I have an issue while loading the data from psa to master data infoobject.
    DTP Error:
    When we had extracted the data from ECC to PSA, the values for field "IOBJNM" are not populated for 0RPM_PORT_ITEM_HIERARCHY
    Thus it is throwing an error while populating this data to the target.
    From where this field will fetch the values?
    Why these values are not being populated from ECC?
    Will there be any issue from BI side? can anyone help me on this.

    Hi Raman,
    yes I had extracted data in RSA3
    There are no values for the field "object".
    Do you have any idea why these values are missing?

  • Getting error while loading omaterial master data

    Hi all,
    I am loading data to omaterial_attr .i am getting an error material number version is invalid.but in source system itself it shows that perticular material number master data also.what's the problem? there are totally 3000 records.only for 100 records i am getting that error.but in sourcesystem(r/3) i have all these material number values also.
    0MATERIAL : Data record 12 ('A02 '): Version 'A02 ' is not valid

    Hi Rama,
    I dont think this error is due to space because if u have specified  ALL_CAPITALS in RSKC then space is included in it by default. Moreover, there wont be any space in ur data in PSA.
    Have you maintained the material number format???? If not, this error can come.
    Assign points if this helps.
    Regards,

  • Error While Loading the Master Data from R3

    Hi Gurus,
    I am loading the masterdata from R3.I have enhanced the Datasource .In that datasource there is a field DATUB ( Valid To Date).For this field I have wriiten the User Exit at the R3 side.Now I am loading the data in BW.But I am not getting the values for DATUB field in the BW, though they are there at the R3 side.
    I have done following to analyse the issue.
    1.Have checked the datasource at the R3 from RSA3.Its populating the field DATUB correctly.
    2.Have deleted the whole masterdata and tried to load again.But no success.
    3.Have tried to load the data for the perticular Bill of Material(BOM).Then it get loaded correctly along with the value of DATUB.But when i tried loading the entire data i am not getting the field DATUB populated.
    Please help me out.Its urgent.
    Thanks.
    Shalaka

    Hello,
    I finally got the solution to my problem.
    If you append a field to generic datsource then you should check the tick in datasource for "field only". Or else you would not get the values handed over to BW.
    Please check following link for more details about this "field only" setting for Generic datasources.
    http://help.sap.com/saphelp_tm70/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
    Regards,
    Anuj

  • Error While Uploading GL Master Data in LSMW

    Hello Experts,
    I am running into error while uploading GL master data in LSMW, I created recording through FS00, then I mapped the fields, it all went good till 13th step, but last step got stuck(Run Batch Input Session), when I am running batch input session, system is showing this message "Function Code cannot be selected"
    Your help would be highly appreciated.
    Regards
    Muhammad Yousuf Ali
    SAP FI Consultant

    Hi,
    first can you pls check your Hierarchy mode setting in FS00 -  before executing Batch input session -
    Open FS00 - go to settings - and Do not display navigation tree select radio button and save it
    then Now Run fresh LSMW - your issue will resolve
    Mahesh

  • Error while loading service SLD Data Supplier

    HI All,
    I am getting an error when i am trying to access the SLD Data Supplier via Visual Administrator.
    Error while loading service SLD Data Supplier
    java.lang.ClassNotFoundException: com.sap.sldserv.vaclient.ClientManagement
    Can somebody tell me how to fix this?
    Regards
    Prakash

    Hi Nigel,
    thanks a lot - I can now access the SLD data supplier from my local visual admin- great!
    unfortunately, the key storage service still throws the error:
    java.lang.NoClassDefFoundError: iaik/x509/V3Extension
            at com.sap.engine.services.keystore.admin.gui.KeystoreContentPanel.<init>(KeystoreContentPanel.java:34)
            at com.sap.engine.services.keystore.admin.gui.SingleKeystoreViewPanel.<init>(SingleKeystoreViewPanel.java:31)....
    Do you know if it's something different with the key storage?
    Best regards
    Cornelia

  • Error while loading Reported Financial Data from Data Stream

    Hi Guys,
    I'm facing the following error while loading Reported Financial Data from Data Stream:
    Message no. UCD1003: Item "Blank" is not defined in Cons Chart of Accts 01
    The message appears in Target Data.  Item is not filled in almost 50% of the target data records and the error message appears.
    Upon deeper analysis I found that Some Items are defined with Dr./Cr. sign of + and with no breakdown.  When these items appear as negative (Cr.) in the Source Data, they are not properly loaded to the target data.  Item is not filled up, hence causing the error.
    For Example: Item "114190 - Prepayments" is defined with + Debit/Credit Sign.  When it is posted as negative / Credit in the source data, it is not properly written to the target.
    Should I need to define any breakdown category for these items?  I think there's something wrong with the Item definitions OR I'm missing something....
    I would highly appreciate your quick assistance in this.
    Kind regards,
    Amir

    Found the answer with OSS Note: 642591..... 
    Thanks

Maybe you are looking for