Error while loading transauction data

Dear Masters
While loading Transauction data, Im notb getting following error. In RSA3 data is there for corresponding datasource Could u please help me
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Thanks in Advance
Raja.S

Hi Raja,
Check the job log in source system.
If it is still running. When it start sending the IDOCs into BW then the request in BW will change yellow again and proceed further.
If the extraction is huge volume of data. It may take long time for the source system job to extract.
Is it against standard extractor or custom build?
If possible split the load with selection in infopackage.
Regards,
Amu

Similar Messages

Error while loading the data from PSA to Data Target

Hi to all,
     I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
      Request IDoc : Application document posted
      Info IDoc 2 : Application document posted
      Info IDoc 1 : Application document posted
      Info IDoc 4 : Application document posted
      Info IDoc 3 : Application document posted
      Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
      Update PSA ( 2462 Records posted ) : No errors
      Transfer Rules ( 2462 -> 2462 Records ) : No errors
      Update rules ( 2462 -> 2462 Records ) : No errors
      Update ( 0 new / 0 changed ) : Errors occurred
      Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
Saran

Hi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

Error while loading master data.

I am facing error while loading master data in a infoobject.
The error comes when I run DTP fo rloading data from PSA to infoobject.
The error wordings are : "MCK_PRDT1 : Data record 1 ('Bleach '): Version 'Bleach ' is not valid"
Please help me in understanding this Version errror and suggest a solution for this.

SAP metodology integration MDM & BW you can look at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0f1f135-0015-2b10-5e83-acca118e17aa
You can turn matching strategy in MDM Data manager for delete dublicate of records
and then use MDM Syndicator for export data to file and then load that file to BW
If you use OHD you cannot load from BW to MDM repository 10 records and unload only 5 because
in BW every record has unique key.
also you can use MDM ABAP or Java API for delete dublicate of records
Edited by: Kanstantsin Chernichenka on May 8, 2009 1:02 PM

BI 7.0 - Duplicate Record Error while loading master data

I am working on BI 7.0 and I am trying to load master data to an info object.
I created an Infopackage and loaded into PSA.
I created transformation and DTP and I get an error after I execute the DTP about duplicate records.
I have read all previous threads about duplicate record error while loading master data and most of the them suggested to check 'Ignore duplicate records' option in the infopackage. But in 7.0, I can only load to PSA with infopackage and it doesn't have any option for me to ignore duplicate records.
My data is getting loaded to PSA fine and I get this error while loading to info object using DTP.
I would appreciate your help to resolve this issue.
Regards,
Ram.

Hi,
Refer:
http://help.sap.com/saphelp_nw2004s/helpdata/en/45/2a8430131e03c3e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/538f3b294a7f2de10000000a11402f/frameset.htm
With rgds,
Anil Kumar Sharma .P

36 duplicate record found. -- error while loading master data

Hello BW Experts,
Error while loading master data
( green light )Update PSA ( 50000 Records posted ) No errors
( green light )Transfer rules ( 50000 ³ 50000 Records ): No errors
( green light )Update rules ( 50000 ³ 50000 Records ): No errors
( green light ) Update ( 0 new / 50000 changed ): No errors
( red light )Processing end: errors occurred
     Processing 2 finished
Þ     36 duplicate record found. 15718 recordings used in table /BIC/PZMATNUM
Þ     36 duplicate record found. 15718 recordings used in table /BIC/XZMATNUM
This error repeats with all the data-packets.
what could be the reason of the error. how to correct the error.
Any suggestions appreciated.
Thanks,
BWer

BWer,
We have exactly the same issue when loading the infoobject 0PM_ORDER, the datasource is 0PM_ORDER_ATTR.
The workaround we have been using is 'Manual push' from the details tab of the monitor. Weirdly we don't have this issue in our test and dev systems, even in Production, this doesn't occur somedays. We have all the necessary settings enabled in the infopackage.
Did you figure out a solution for your issue, if so please let me know and likewise I will.
-Venkat

Strange error while loading master data

Hi,
Has anybody seen the following error while loading master data?
6 duplicate record found. 886 recordings used in table /BI0/XCOSTCENTER
6 duplicate record found. 886 recordings used in table /BI0/PCOSTCENTER
and repeat again once (so total 4 lines of error message)
The update mode is "PSA and then in the infoobject (Package by Package)"
Surprisingly the step by step error analysis shows all green except in step "Processing error in Warehouse reported?" which is red. The over all status i.e. Total and Technical are both red.
It all means something went wrong but with the step by step error analysis all green even in the parts like "Processing successfully finished" and "All reported data packet received" I am confused.
To make matter more confusing there are no error records in corresponding PSA data package.
any comments would be greatly appreciated.

Hi Novice,
In your InfoPackage > Processing tab, select the option Only PSA and Update subsequently into Data Target, and also add the check mark for Ignore double data records. Then try the load again...it should be okay.
Hope this helps...

Caller-70 Error while loading master data into infoobject

hi ,
I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings were PSA and then into data target.
Short dump in the Warehouse
Diagnosis
The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
System Response
"Caller 70" is missing.
ST22 dump analysis is as below:
Termination occurred in the ABAP program "GP476CZYBEF2WX53UZ8TXFG6XOS" - in
"VALUE_TO_SID_CONVERT_DB".
The main program was "RSMO1_RSM2 ".
Please help as soon as you can..Production problem....
Regards
Rakesh

Hi rakesh,
May be IDOCs not processed completely,
Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
Cheers
Raj

Language error while loading master data source for text

Hi,
We are getting the following error while loading the data in 0DISTR_CHAN_TEXT data source.
"Error during multibyte alignment for language D (position 2)".
Can we filter the data on the Language ( ='EN'). At the data source level LANGU field is marked for selection but still it is not available as filter at info package level.
Thanks
VV

Hey Vishal,
If the field is marked for Selection at data source level, then it must be available for selection in infopackage.
Try checking in RSA3 and see if it is available for selection over there. Let us know what was the output in R/3.
Regards,
Anjum.

Error while loading VBAK data

Hello Folks,
I got the following error while loading VBAK data. I know this is something to do with my user-id authorization but just wanted to make sure whether I can bypass this issue.
When checking your authorizations for object 'tEST5' (technical name: ZSS5) it was established that you do not have authorization in your user master record for this object (return code 12).
Please advise

Hi Kumar,
This is authorization issue you have to get the authorization to your User Role to run this activity. Contact your security team they will help you.
Regards,
Srikanth.

Error while loading master data attribute

Hi Guru's
I am getting below mention error while loading master data attribute.
0MANU_MATNR : Data record 1035 ('000000000000229058 '): Version 'BDM755s ' is not valid
Please sugggest how to resolve ?
Regards
Karan

Hi,
I think there is problem with "0MANU_MATNR" Data, check the records 1033 to 1036 and find the differnce between 1035 record and other records, some values is giving problem so by looking at other reocrds i.e 1033,1034,1036. Check in PSA in Monitor.
Note: If any problem with Upper/Lowe case then use TOUPPER in Transfer Rules
If need use Conversion exits in transfer rules.
ALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    INPUT         = 0MANU_MATNR
IMPORTING
   OUTPUT        =   Result .
or
ALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
    INPUT         = 0MANU_MATNR
IMPORTING
   OUTPUT        =   Result .
Thanks
Reddy
Edited by: Surendra Reddy on Mar 3, 2009 11:46 AM

Error while loading master data to attribute ZMAJORGU(Major organisational unit)

Hi Experts,
While loading master data to ZMAJORGU(MOU)(info object texts) from datasource (ZOS_HRP1000)datasource iam getting error in DTP.
below is the error...
Diagnosis
    Data record 349 & with the key 'Ship &' is invalid in value 'Ship &' of
    the attribute/characteristic ZMAJORGU &.
System Response
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This
    allows you to maintain your master data.
Please find the below screen shots
I have done the following regarding the issue ....Looking at the error i have gone trough the transformation and i didnt find any routines or formuales
I have checked the PSA and down loaded the data to spread sheet and put a filter on SHORT and STEXT assuming i will find the value
'Ship &' as mentioned in the Diagnosis description. However i was not able to find the relavent data(i went to se16 gave teh request ID from PSA and displayed the entire data)tarting with Ship .The closest value i could find in both the fileds was was AVP Shipment .
I have the following questions
1)In the screen short 2 it says record number 349 is it right to go to PSA table and check against the record number 349(i tried that but i was not able to find the error against that record)
2)why am i not finding the value 'Ship' in PSA ...but this is the value wich is creating a poblem in updating to the target ....does it mean the record value is Ship or it starts with Ship or is ir part of some word?
Please find the attached PSA data file (u have to convert it to Excel)
I request people to help me analyse the issue and fix the issue.
Regards
Kiran

Ram
I checked other records as well they were a lot of smallcharecters upper case charectres ,numeric special charecters .but nothing stopped ...when the system is even accpeting all other charectres like smallof caps or numeric... why on this record is creating an issue...
please have a look at error stack
and i have one more question when i look at PSA there are close to 300000 records
but when i do an SE16 with request id i see only close to one lakh records (i came to conclusion b dragging down and the last record number was (below screen shot)
Can you tell me what my mistake is numebr or records are not tallying in SE16 and PSA..

Error while loading Transactional data from NW BW Infoprovider

Hi,
I am trying to load the transactional data using the delivered "Transactional data from NW BW Infoprovider" package and getting error message Error occurs when loading transaction data from other cube .
Below is the transformation file content
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = TAB
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=NO
CREDITPOSITIVE=YES
MAXREJECTCOUNT= 9999999999999
ROUNDAMOUNT=
*MAPPING
ACCOUNT = 0ACCOUNT
BUSINESSTYPE = *NEWCOL(NOBTYPE)
BWSRC = *NEWCOL(R3)
COMPANYCODE = 0COMP_CODE
DATASRC = *NEWCOL(R3)
FUNCTIONALAREA = *IF(0FUNC_AREA = *STR() then *STR(NOFA);0FUNC_AREA)
GAME = *NEWCOL(NOGAME)
INPUTCURRENCY = *IF(0CURRENCY = *STR() then *STR(NOCURR) ; 0CURRENCY)
PROBABILITY = *NEWCOL(NOPROB)
PRODUCT = *NEWCOL(NOPROD)
PROFITCENTER = 0PROFIT_CTR
PROJECT = *NEWCOL(NOPROJECT)
TIME = 0FISCPER
VERSION = *NEWCOL(REV0)
WEEKS = *NEWCOL(NOWEEK)
SIGNEDDATA= 0AMOUNT
*CONVERSION
Below is the Error Log
/CPMB/MODIFY completed in 0 seconds
/CPMB/INFOPROVIDER_CONVERT completed in 0 seconds
/CPMB/CLEAR completed in 0 seconds
[Selection]
InforProvide=ZPCA_C01
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\R3_TD_P&L.xls
CLEARDATA= Yes
RUNLOGIC= No
CHECKLCK= Yes
[Messages]
Task name CONVERT:
No 1 Round:
Error occurs when loading transaction data from other cube
Application: ACTUALREPORTING Package status: ERROR
Does anyone had this issue before or is there something that needs to be looked in the BW delivered task ?
ANy Inpout will be appreciated.
Sanjay

Hello Guru,
Currently i am getting below error while loading costcenter master data from BW to BPC.
Task name MASTER DATA SOURCE:
Record count: 189
Task name TEXT SOURCE:
Record count: 189
Task name CONVERT:
No 1 Round:
Info provider is not available
Application: ZRB_SALES_CMB Package status: ERROR
Anybody can tell me, if i have missed anything ???
Regards,
BI NEW
Edited by: BI NEW on Feb 23, 2011 12:25 PM

Error while loading the data from text file

Hi,
I got an error " Data Value Encountered before all Dimensions selected" while loading the data from the text file.
Can any one please suggest me the solution.

Possible Solutions
Make sure that the data source is valid.
Is a member from each dimension specified correctly in the data source or rules file?
Is the numeric data field at the end of the record? If not, move the numeric data field in the data source or move the numeric data field in the rules file.
Are all members that might contain numbers (such as "100") enclosed in quotation marks in the data source?
If you are using a header, is the header set up correctly? Remember that you can add missing dimension names to the header.
Does the data source contain extra spaces or tabs?
Has the updated outline been saved?

BPC Error while loading master data from SAP BW

Hello Guru,
I have NW BPC 7.5 installed on BW server. Currently i have started to work on one application where i have to load master data first. I am loading master data for cost center.
I looked into the process chain "BPC: Import BW InfoObject master data" and i found that few processes are in GREEN color and few are in RED color (Display). is that correct or not ? then as per some of the thread i went to "BPC: Convert BW infoObject master data" --> SOURCE_TYPE = IP and added one parameter "FORMULA_FILE_NO". Then i saved this process chain and activated it.
I created transformation file in BPC and it got created successfully but while i try to load packages it throws me error.
Q. Do i need to have entire process chain with all processes in GREEN to have the master data in BPC ?
Q. Do i need to activate any BADI's for this or not ?
I appreciate your help in advance. I trie

Hello Guru,
Currently i am getting below error while loading costcenter master data from BW to BPC.
Task name MASTER DATA SOURCE:
Record count: 189
Task name TEXT SOURCE:
Record count: 189
Task name CONVERT:
No 1 Round:
Info provider is not available
Application: ZRB_SALES_CMB Package status: ERROR
Anybody can tell me, if i have missed anything ???
Regards,
BI NEW
Edited by: BI NEW on Feb 23, 2011 12:25 PM

Records was deleted at R/3 sys - getting error while loading the data

Hi All,
we are extracting the data from 2LIS_12_VCITM, 2LIS_11_VASCL, 2LIS_11_V_ITM, 2LIS_13_VDITM and 2LIS_11_VAITM into Cube RSD_C03. But one record (Sales Order) was deleted at R/3 system so we getting the error message that Caller 09 contains an error message while loading the data from 2LIS_12_VCITM.
we have replicate the DataSource and activate Trans rules but no use still getting the same error.
when we execute the data source 2LIS_12_VCITM at RSA3 with update mode as D (Transfer of the deltas since the last request)getting error message that Errors occurred during the extraction
and we are getting the zero records at RSA3 for the 2LIS_12_VCITM as update mode as F (Transfer of all requested data)
And getting shot dump that TSV_TNEW_PAGE_ALLOC_FAILED at BW side.
Could you kindly suggest me any one how to rectify this error.
Thanks in Advance,
Shaliny. M

hai Lilly
I activated myself source system and replicate the my datasource .
Then activate the update rules for ODS , InfoCube and InfoCube .
Then i tried to load the data into InfoCube from ODs .
Again im getting same problem .
why it is like that
pls tell me
rizwan

Error while loading transauction data

Similar Messages

Maybe you are looking for