Error while logging in the SAP Screen Persona

Hi Experts,
When I login into the persona, sometime I get error message shown below.
After clicking on 'OK' button, it is working fine.
Can you please let me know why this error message comes and how to resolve it?
Thanks..

Hi ,
Please review the following SAP Note:
1848339 - Installation and Upgrade Information for SAP Screen Personas Release 1.0/ Release 2.0
could you please check the Prerequisites as per the SAP note:1848339. Thanks
Regards,
Krishna

Similar Messages

  • Error while logging in the BPC

    Hi All
    We are using BPC MS version.
    We have encountered the following error, while Logging into the server :
    ' Cannot insert duplicate key row in object ' dbo.TBLDEFAULTS' with unique index ' IX_tbldefaults'. The statement has been terminated.
    I have also seen note no. 1326648 but we are alredy on SP005
    If anybody, has solution for this, please let us know.
    Thanks & Regards
    Rushabh Doshi
    Edited by: R201184 on Nov 19, 2009 3:38 AM

    Usually this happen when you have a bad restore of an appset.
    Or it can happen when you are doing a reimage of one computer into another computer.
    Into tbldefault from appset where you try to connect it seems you have some duplicate records and this is causing the issue.
    You have to find these duplicate records and to leave just a single record.
    Regards
    Sorin Radulescu

  • SAP Screen Personas error "A problem with network connectivity has been detected"

    Hi,
    We just installed Personas release 100 SP02 and performed the
    configuration steps necessary. But when we acces the url and logon to
    personas we get the following erre
    A problem with network connectivity has been detected.
    Please check you connection and refresh your browser.
    Any help to solve this issue would be appreciated.
    Best Regards.

    Please use this checklist to see if everything is correct:
    1. restgui service handler class has CL_HTTP_EXT_ITS_BASIC
    2. SPRO -> Sap screen Personas -> Maintain system has
           - 3 letter system id
           - "Server.Url" without typo and value in http(s)://<SERVER>:<PORT>/ format 
           - "Service.Uri" without typo and value as /restgui
    3, Note 2026487 is installed
    4. If target system is different from source system then you are able to access the following
             - http(s)://<TARGETSERVER>:<PORT>/clientaccesspolicy.xml
             - http(s)://<TARGETSERVER>:<PORT>/crossdomain.xml
    5. role is assigned to user under /n/persos/admin_ui -> User Maintenance -> Search -> Show user -> Role
    If you still get error, then if you are using SSO, please check if you have configured login/create_sso2_ticket parameter correctly.
    Thanks
    Chinthan

  • Error message when switching SAP screen personas flavors

    Hi,
    After we made some screen personas flavors, when we switch one flavor to another, we got an error message like "Error: Unexpected behavior has been detected, connection is shut down. Login again."
    According to a previous thread,
    Screen Personas: Error: Unexpected behavior has been detected :
    He said when he upgraded to Personals 2.0 SP01, the problem was solved.
    But we are already using the latest version Personals 2.0 SP01 and Silverlight 5.
    Does anybody got some solution?
    We appreciate your help!

    Hi Qiang,
    Please make sure that you have the updated version of personas by implementing the respective service pack note mentioned here.
    https://css.wdf.sap.corp/sap/support/notes/1964257
    Also make sure that you target system kernel patch is not very old.
    Lastly, there are some pre-requisite kernel notes which have to be implemented.
    Kindly go through the link below:
    http://scn.sap.com/community/gui/blog/2013/08/28/sap-screen-personas--how-to-configure-the-system-troubleshooting-faq
    Regards,
    Susahnt

  • Run time error while logging from a client

    hi all,
    My server is connected to 10 clients. out of that 2 clients are suddenly showing error while logging.
    Microsoft visual studio C++(error window)
    run tme error
    debug
    error c:/program files/sap/sap business one/sapbusiness one.exe
    This is the error window showing. I have uninstalled the client and again installed it but with no results. I found in the path mentioned above there should be the client run file "sap business one.exe", which is not present. I mean the .exe is missing. the file shows "sap business one" only.
    whenever we install the client then i the folder
    c:/program files/sap/sap business one
    there is a .exe file. which is not being installed in this client machine. what is being installed is a
    sap business one (not a .exe)
    when the client icon in the desktop is made to run, the log in screen appears, the list of company and db appears. I have recently upgraded the server to PL 42. so when a company is selected for log in then the client upgrade message also appears. when "ok" is clickd the run time error appears.
    where as all other clients are running well after the upgrade.
    please help with a solution.
    regards,
    Raj
    Edited by: debraj bhattacharyya on Dec 5, 2008 5:37 PM

    I have explored all the areas and I hope the problem is with the exe file only. Because I have tried an option. I copied the entire file SAP Business One (in the C:
    Program Files\sap) from one client which is working to the client where the error was showing. Then the it started working properly.
    But I donot think this will be a permanent solution. Because on reinstaling the client the SAPBusiness One.exe does not appear and to the best of my research i am quite sure that may be the problem.
    Any idea from any one for a perfect reason.
    Regards,
    Raj

  • Error while running  DTW in SAP Business One 9.0

    Dear All,
    Error while running  DTW the error shows that in SAP Business One 9.0 & PL 08 the 'Unable to access SBO-Common Database'  & attached the screen shot for the same.
    Kindly guide for the same
    Thanks&Regards
    Umesh Vaidya

    Hi Umesh...
    check with these links
    http://scn.sap.com/thread/3164843\
    -111 Cannot access sbo-common database
    Unable to access SBO-Common database
    865191- DTW Troubleshooting Guide
    Hope Helpful
    Regards
    Kennedy

  • Error while uploading images to SAP Mobile Documents from iPad application using ObjectiveCMIS.

    Hi,
    I am getting the error while uploading images to SAP Mobile Documents from custom iOS(iPad )application using ObjectiveCMIS library.
    My Custom method is as follows:
    - (void)createSalesOrderRouteMapImageInFolder:(NSString*)salesOrderRouteMapFolderId routeMapImageTitle:(NSString *)imageTitle routeMapContent:(NSData *)imageData
        NSInputStream *inputStream = [NSInputStream inputStreamWithData:imageData];
        NSMutableDictionary *properties = [NSMutableDictionary dictionary];
        [properties setObject:[NSString stringByAppendingFileExtension:imageTitle] forKey:@"cmis:name"];
        [properties setObject:@"cmis:document" forKey:@"cmis:objectTypeId"];
        [self.session createDocumentFromInputStream:inputStream
                                           mimeType:@"image/png"
                                         properties:properties
                                           inFolder:salesOrderRouteMapFolderId
                                      bytesExpected:[imageData length]
                                    completionBlock:^(NSString *objectId, NSError *error) {
                                        NSLog(@"Object id is %@",objectId);
                                        if(error == nil) {
                                            [inputStream close];
                                            NSLog(@"Uploading Sales order route map successfully.");
                                            [[NSNotificationCenter defaultCenter] postNotificationName:SaveOrderSuccessNotification object:nil];
                                        } else {
                                            [inputStream close];
                                            NSLog(@"Uploading sales order route map failed.");
                                            [[NSNotificationCenter defaultCenter] postNotificationName:SaveOrderFailedNotification object:error];
                                    } progressBlock:^(unsigned long long bytesUploaded, unsigned long long bytesTotal) {
                                        NSLog(@"uploading... (%llu/%llu)", bytesUploaded, bytesTotal);
    OBjectiveCMIS Method in which i am getting error during upload:
    - (void)sendAtomEntryXmlToLink:(NSString *)link
                 httpRequestMethod:(CMISHttpRequestMethod)httpRequestMethod
                        properties:(CMISProperties *)properties
                contentInputStream:(NSInputStream *)contentInputStream
                   contentMimeType:(NSString *)contentMimeType
                     bytesExpected:(unsigned long long)bytesExpected
                       cmisRequest:(CMISRequest*)request
                   completionBlock:(void (^)(CMISObjectData *objectData, NSError *error))completionBlock
                     progressBlock:(void (^)(unsigned long long bytesUploaded, unsigned long long bytesTotal))progressBlock
        // Validate param
        if (link == nil) {
            CMISLogError(@"Must provide link to send atom entry");
            if (completionBlock) {
                completionBlock(nil, [CMISErrors createCMISErrorWithCode:kCMISErrorCodeInvalidArgument detailedDescription:nil]);
            return;
        // generate start and end XML
        CMISAtomEntryWriter *writer = [[CMISAtomEntryWriter alloc] init];
        writer.cmisProperties = properties;
        writer.mimeType = contentMimeType;
        NSString *xmlStart = [writer xmlStartElement];
        NSString *xmlContentStart = [writer xmlContentStartElement];
        NSString *start = [NSString stringWithFormat:@"%@%@", xmlStart, xmlContentStart];
        NSData *startData = [NSMutableData dataWithData:[start dataUsingEncoding:NSUTF8StringEncoding]];
        NSString *xmlContentEnd = [writer xmlContentEndElement];
        NSString *xmlProperties = [writer xmlPropertiesElements];
        NSString *end = [NSString stringWithFormat:@"%@%@", xmlContentEnd, xmlProperties];
        NSData *endData = [end dataUsingEncoding:NSUTF8StringEncoding];
        // The underlying CMISHttpUploadRequest object generates the atom entry. The base64 encoded content is generated on
        // the fly to support very large files.
        [self.bindingSession.networkProvider invoke:[NSURL URLWithString:link]
                                         httpMethod:httpRequestMethod
                                            session:self.bindingSession
                                        inputStream:contentInputStream
                                            headers:[NSDictionary dictionaryWithObject:kCMISMediaTypeEntry forKey:@"Content-type"]
                                      bytesExpected:bytesExpected
                                        cmisRequest:request
                                          startData:startData
                                            endData:endData
                                  useBase64Encoding:YES
                                    completionBlock:^(CMISHttpResponse *response, NSError *error) {
                                        if (error) {
                                            CMISLogError(@"HTTP error when sending atom entry: %@", error.userInfo.description);
                                            if (completionBlock) {
                                                completionBlock(nil, error);
                                        } else if (response.statusCode == 200 || response.statusCode == 201 || response.statusCode == 204) {
                                            if (completionBlock) {
                                                NSError *parseError = nil;
                                                CMISAtomEntryParser *atomEntryParser = [[CMISAtomEntryParser alloc] initWithData:response.data];
                                                [atomEntryParser parseAndReturnError:&parseError];
                                                if (parseError == nil) {
                                                    completionBlock(atomEntryParser.objectData, nil);
                                                } else {
                                                    CMISLogError(@"Error while parsing response: %@", [parseError description]);
                                                    completionBlock(nil, [CMISErrors cmisError:parseError cmisErrorCode:kCMISErrorCodeRuntime]);
                                        } else {
                                            CMISLogError(@"Invalid http response status code when sending atom entry: %d", (int)response.statusCode);
                                            CMISLogError(@"Error content: %@", [[NSString alloc] initWithData:response.data encoding:NSUTF8StringEncoding]);
                                            if (completionBlock) {
                                                completionBlock(nil, [CMISErrors createCMISErrorWithCode:kCMISErrorCodeRuntime
                                                                                     detailedDescription:[NSString stringWithFormat:@"Failed to send atom entry: http status code %li", (long)response.statusCode]]);
                                      progressBlock:progressBlock];
    Attaching the logs:
    ERROR [CMISAtomPubBaseService sendAtomEntryXmlToLink:httpRequestMethod:properties:contentInputStream:contentMimeType:bytesExpected:cmisRequest:completionBlock:progressBlock:] HTTP error when sending atom entry: Error Domain=org.apache.chemistry.objectivecmis Code=260 "Runtime Error" UserInfo=0x156acfa0 {NSLocalizedDescription=Runtime Error, NSLocalizedFailureReason=ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public void com.sap.mcm.server.service.AbstractChangeLogService.updateChangeLog(java.lang.String,boolean) throws com.sap.mcm.server.api.exception.MCMException method on bean instance com.sap.mcm.server.nw.service.NwChangeLogService@4e7989f3 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|NwChangeLogService in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.ejb.EJBTransactionRolledbackException: ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public com.sap.mcm.server.model.ChangeLog com.sap.mcm.server.dao.impl.ChangeLogDaoImpl.findByUserId(java.lang.String) method on bean instance com.sap.mcm.server.dao.impl.ChangeLogDaoImpl@2852b733 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|ChangeLogDaoImpl in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.persistence.NonUniqueResultException: More than 1 objects of type ChangeLog found with userId=25f8928e-8ba0-4edd-b08e-43bf6fb78f1a; nested exception is: javax.ejb.EJBException: ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public com.sap.mcm.server.model.ChangeLog com.sap.mcm.server.dao.impl.ChangeLogDaoImpl.findByUserId(java.lang.String) method on bean instance com.sap.mcm.server.dao.impl.ChangeLogDaoImpl@2852b733 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|ChangeLogDaoImpl in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.persistence.NonUniqueResultException: More than 1 objects of type ChangeLog found with userId=25f8928e-8ba0-4edd-b08e-43bf6fb78f1a}
    2015-03-12 04:08:31.634 Saudi Ceramics[4867:351095] Uploading sales order route map failed.

    Hi Sukalyan,
    Have you checked the below links?
    These will give you step by step implementation procedure.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a099a3bd-17ef-2b10-e6ac-9c1ea42af0e9?quicklink=index&overridelayout=true
    http://wiki.sdn.sap.com/wiki/display/WDJava/KmuploadusingWebdynproapplication
    Regards,
    Sandip

  • Error while logging into server

    Hi all,
         We are getting the following error while logging into portal server.
    <b>Portal Runtime Error
    An exception occurred while processing a request for :
    iView : N/A
    Component Name : N/A
    com/sapportals/htmlb/AbstractCompositeComponent.
    Exception id: 05:24_21/03/06_0306_7632250
    See the details for the exception ID in the log file</b>
          The log file says:
    The error occurred while trying to load "com.sapportals.wcm.app.controller.ControllerComposite".
                at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:389)
                at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
                at com.sapportals.wcm.portal.component.base.ControllerComponent.getPage(ControllerComponent.java:90)
                at com.sapportals.portal.htmlb.page.PageProcessorComponent.getPage(PageProcessorComponent.java:193)
                at com.sapportals.wcm.portal.component.base.ControllerComponent.getPage(ControllerComponent.java:101)
                at com.sapportals.portal.htmlb.page.PageProcessorComponent.doOnNodeReady(PageProcessorComponent.java:62)
                at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
                at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
                at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:369)
                at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
                at com.sapportals.portal.pb.PageBuilder.createAndAddEmbeddediView(PageBuilder.java:178)
                at com.sapportals.portal.pb.PageBuilder.createiView(PageBuilder.java:391)
                at com.sapportals.portal.pb.PageBuilder.createAndAddiViews(PageBuilder.java:234)
                at com.sapportals.portal.pb.PageBuilder.doOnNodeReady(PageBuilder.java:576)
                at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
                at com.sapportals.portal.pb.PageBuilder.handleEvent(PageBuilder.java:725)
                at com.sapportals.portal.prt.component.CachablePortalComponent.handleEvent(CachablePortalComponent.java:685)
                at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
                at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:369)
                at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
                at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:642)
                ... 21 more
    #1.5#00096BDA49250056000000230000194C00040F7F0C37AE90#1142938246828#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#Administrator#36976##PCIIB03901.cts.com_J2E_7632250#Administrator#85981ec0b8c811daa57e00096bda4925#SAPEngine_Application_Thread[impl:3]_22##0#0#Error#1#/System/Server#Java###Exception ID:04:20_21/03/06_0302_7632250
    [EXCEPTION]
    #1#com.sapportals.portal.prt.runtime.PortalRuntimeException: PortalRuntimeException
                at com.sapportals.portal.prt.core.PortalRequestManager.handleRequestException(PortalRequestManager.java:921)
                at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:803)
                at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
                at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
                at java.security.AccessController.doPrivileged(Native Method)
                at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
                at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
                at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
                at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
                at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
                at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
                at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
                at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
                at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
                at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
                at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
                at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
                at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
                at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
                at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
                at java.security.AccessController.doPrivileged(Native Method)
                at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
                at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:160)
    Caused by: java.lang.NoClassDefFoundError: com/sapportals/htmlb/AbstractCompositeComponent
    Loader Info -
    ClassLoader name: [com.sapportals.portal.prt.util.ApplicationClassLoader@13cf82b]
    Parent loader name: [com.sapportals.portal.prt.util.AutoClassLoader@1052dc3]
    References:
       not registered!
    Resources:
       D:
    usr
    sap
    J2E
    JC00
    j2ee
    cluster
    server0
    apps
    sap.com
    irj
    servlet_jsp
    irj
    root
    WEB-INF
    portal
    portalapps
    com.sap.km.cm.main
    lib
    km.appl.controller.controller_api.jar
       D:
    usr
    sap
    J2E
    JC00
    j2ee
    cluster
    server0
    apps
    sap.com
    irj
    servlet_jsp
    irj
    root
    WEB-INF
    portal
    portalapps
    com.sap.km.cm.main
    lib
    km.appl.docapplet.docapplet_api.jar
       D:
    usr
    sap
    J2E
    JC00
    j2ee
    cluster
    server0
    apps
    sap.com
    irj
    servlet_jsp
    irj
    root
    WEB-INF
    portal
    portalapps
    com.sap.km.cm.main
    lib
    km.appl.servlet.base_api.jar
       D:
    usr
    sap
    J2E
    JC00
    j2ee
    cluster
    server0
    apps
    sap.com
    irj
    servlet_jsp
    irj
    root
    WEB-INF
    portal
    portalapps
    com.sap.km.cm.main
    lib
    km.appl.servlet.webdav_api.jar
    The error occurred while trying to load "com.sapportals.wdf.WdfCompositeController".
    Loader Info -
    ClassLoader name: [com.sapportals.portal.prt.util.ApplicationClassLoader@13cf82b]
    Parent loader name: [com.sapportals.portal.prt.util.AutoClassLoader@1052dc3]
    References:
       not registered!
    I checked the following thread:
    /thread/25951 [original link is broken]
    The htmlb jar file is available in the location where it has to be.
    We have been getting this error 2 or 3 times; each time we had to install the server again!!Couldn't find any other alternative.
    Can someone help me in resolving this issue?
    Thanks in advance.
    Any help towards solving the problem will be definitely rewarded.
    Regards,
    M.Subathra

    Hi James,
            Am not able to get u.
    The jar file is already there in the path.
    Now,should I rename com.sap.portal.htmlb.par.bak to com.sap.portal.htmlb.par? Please clarify.
    Thanks & Regards,
    M.Subathra

  • Message failing in SXMB_moni----Error while reading from the secure store

    Hi,
    The scenario is as below
    A file is picked up from a folder and processed to enrich it.This enriched file is then written back in a different folder.
    The message is failing in sxmb_moni while trying to write the file in the folder.
    The PI system is a system copy of another system and few of the configuration objects are transported through a tpz file to this PI system.The file receiver channel used to write this file is also transported through this tpz file.
    Below is the error seen in moni.:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?><!-- Call Adapter --> <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIServer</SAP:Category><SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code><SAP:P1/><SAP:P2/><SAP:P3/><SAP:P4/><SAP:AdditionalText>Error while reading from the secure store: ERROR_U: No service user password found for Adapter Engine</SAP:AdditionalText><SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine
    </SAP:Stack><SAP:Retry>M</SAP:Retry></SAP:Error>
    Below is Trace log:
    <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER"></Trace><!-- ************************************ -->
    <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV"></Trace><!-- ************************************ -->
    <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL"></Trace><!-- ************************************ -->
    <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
    <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP"></Trace><!-- ************************************ -->
    <Trace level="1" type="T">error reading secstore:Error while reading from the secure store: ERROR_UNKNOWN: System-dependent data for entry  changed:  / (SECSTORE,031) </Trace>
    <Trace level="1" type="System_Error">Error while reading access data (URL, user, password) for the Adapter Engine  </Trace>
    </Trace>
    </Trace>
    <Trace level="1" type="System_Error">Error exception return from pipeline processing! </Trace>
    <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST"></Trace><!-- ************************************ -->
    Is this because  PI system is a system copy of another system ?
    Regards,
    Sneha

    Error while reading access data (URL, user, password) for the Adapter Engine
    Check out Michal's reply:
    Re: URL for Central Adapter Engine
    As you said there was a system copy it may be the case that some things were not configured properly

  • SAP Screen Personas: Restgui not working _ URGENT

    Hi Expert,
    I am having trouble configuring SAP Screen Personas, I have done all the configuration provided in the Personas Config Guide. Please see blew:
    1. Activated all the following services in SICF
       /sap/persos_app
       /sap/bc/bsp/persos/mainapp
       /sap/bc/bsp/sap/system
       /sap/bc/bsp/sap/public/bc
       /sap/public/bsp/sap/public/bc
       /sap/public/bsp/sap/system
       /sap/public/bsp/sap/htmlb
       /sap/public/bc
       /sap/public/bc/ur
    2. Changed the restgui to CL_HTTP_EXT_ITS_BASIC
    3. Setup the system in the IMG
         Server.Url    url to your system
         Service.Uri    /restgui
    4. Under “Gui Configuration” button, you have the following parameters set:
    Parameter
    Value
    ~RESTGUI
    1
    ~XSRFCHECK
    0
    ~WEBGUI
    1
    But when testing the restgui service, it prompts for username & password but nothing happens.
    URL:  http://<system Id>:<port>/sap/restgui?sap-client=200
    I also tried testing the service from  default_host --> SAP --> BC --> BSP --> Persos --> mainapp, it gives me error:
    500 Business Server Page (BSP) error.
    I have checked the cache memory allocation; it is set to 512 mb.
    Please help me, why I m not able to test the restgui services from my browser. What i'm missing and how to fix the BSP error.
    Thanks in advance.
    Regards
    J S

    Please help regarding issue  attached image
    1 restgui :
    2 In Persuna home page not connect to server when already mentioned server but still same issue.
    Please give advice and share authentic ways.

  • SAP Screen Personas problem in a script for FS00(G/L Account Display) screen

    We are facing a problem when we are developing a simple script for FS00(G/L Account Display) in SAP Screen Personas. Let me give you a brief of the problem:
    We have taken two text fields in the dashboard from which the values will be copied and will be pasted in corresponding text fields of G/L Account and Company Code in FS00 TCode.
    When we are giving both the values, then script is working fine and it will navigate to the customized Personas screen where all the details are shown.
    But when we are leaving any one/both fields blank and execute the script option, then the pop to enter G/L Account/Company Code is coming:
    If we are setting the basic FS00 TCode view as default then after the pop-up we are able to enter the respective G/L account number or company code and everything is running fine.
    If we are setting our customized personas screen as default screen, then the pop-up keeps on appearing and therefore we are not able to give the inputs (G/L account or company code).
    And even if somehow manage to get rid of the error and enter the correct GL account and Company Code then also the details are not displayed. The F4 search help to pick the G/L account number and company code is not working, somehow the Personas screen seems to be locked here.
    Please let us know if someone has already encountered this type of situation before and what should be the solution of this.

    Hi,
    You could ensure that both of the text fields are not empty on your 'dashboard' before executing the FS00 tcode. This would negate the popup from ever appearing.
    To do this you can use the "IF <text field control ID> Is Empty" statement in your script and then output a custom error message to another text box if the condition is true. then use an "IF <text field control ID> Is NOT Empty" statement to copy the value/s execute the FS00 tcode if the condition is true.
    Now if you're going to check multiple fields for entries before executing the FS00 you'll have to get a little more creative and do something like I did in one my scripts (thanks again to Steve Rumsby for the tips) and create a 'check field' where you can enter values for items checked successfully and then use a little bit of javascript to count up the checks and check the result before executing the next part of the script.
    Another idea is to check for the existence of the popup and navigate past it in your script, to do this you can use the "IF <control ID> control exists" statement.
    Either one should work.

  • Send a instant message on the SAP screen

    Dear All,
    Plz explain the process of sending an instant messges on the SAP screen (A small window comes with messge on the screen, irrespective of the transaction we are in)
    Hope i am clear i want.
    Regards
    Madhu

    If u have authorisation of sm02 then fine , or else , u can use SBWP , for the same purpose
    Execute SBWP, and create  a new message and while giving the receipient name , also tick the box of of Send Express , it will immediately flash on the user terminal.
    AVS

  • Error while logging into BI Publisher

    Hello All,
    I get the below error while logging into BI Publisher with the Default credentials
    "oracle.apps.xdo.servlet.resourc eNotFoundException: %s_Reports_Path%/Admin/Security/principals.xml "
    Any inputs on this is highly appreciated.
    Thanks,
    Vasavi

    Hi ,
    Check the following thread
    BI Publisher login fails
    May be the same issue is sloved...
    Thanks,
    Ananth

  • Object failed to run due to an error while processing on the Job Server

    when i am scheduling a report ith email notification i am getting  below error
    error msg: Object failed to run due to an error while processing on the Job Server
    i have configured email notification in bo cmc and server also SMTP enabled. while scheduling report to ueser i am getting error and even mails are delivered to users as well.

    hi prithvi,
    i am able to schedule reports to other destinations and reports are delivered as per the requirement.
    i am able to telnet SMTP server from Adaptive job server machine on SMTP port.
    have to check errors on log file....
    @ COULD YOU  PLEASE LET ME KNOW USER CAN SEND A MAIL TO USER  IN SAME DOMAIN . WHILE SCHEDULING A REPORT AND AS OPTION AVAILABLE  IN 4.0 LAUNCH PAD CAN HE SEND A MAIL DIRECTLY  AFTER RUNNING REPORT.

  • Error while connecting to the database from a JSP Page

    Hi,
    I am using a simple JSP page which is based on the sample JSP pages from OTN.
    When I try to connect to my database using the following code:
    InitialContext ic = new InitialContext();
    OracleDataSource ds = (OracleDataSource)ic.lookup("jdbc/OTN9iDS");
    m_connection = ds.getConnection();
    I get the following error:
    Naming exception Error while connecting to the database : javax.naming.NameNotFoundException: jdbc/OTN9iDS not found in JDBCTest-JDBCTestProject-webapp
    Does anybody know wht this is happening?
    Any help would be appreciated
    FRank

    Hi Frank,
    Are you using standalone OC4J or 9iAS ? If you are using standalone OC4J then you need to add a proper data source entry in %OC4J_HOME%j2ee\home\config\data-sources.xml file.
    If you are using 9iAS the you can log in to the Enterprise Manager console and add the data source entry by using wizard provided by 9iAS.
    Ensure the case of the JNDI lookup string, since, it is case sensitive.
    Hope this helps.
    Abhijeet

Maybe you are looking for