Error while mainatining packing material in POP1 transaction
Hi,
We are mainatined the 'determination of packing instructions'. I have created a VERP material and a FERT material. When i try to create packing instructions using POP1 transaction for this material i get an error message ' Material is not a packing material (Loading equipment)'. I am sure that the material i am using is a Verp material.
I would like to know if i am missing any master data setting or customization settings. Any inputs in resolving this issue will be of great help.
Thanks,
Harish
Hi,
In the fisrt line item enter the packaging material and in the second line item enter the material that means
Item catergory "P" - Packaging material
Item catergory "M" - Material (Which is to be packed1)
If you give in reverse way you will get the error message what you have maintioned.
Regards,
K.Annadurai.
Similar Messages
-
Error while Installing Oracle Services for Microsoft Transaction Server
I downloaded "Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP" and installed the personal edition. It did not install successfully and gave this error message:
Error while Installing Oracle Services for Microsoft Transaction Server
The specified key was not found while trying to GetValue
- stop installation of all products.
- stop installation of this component only.
The installation of Oracle 9i Database was unsuccessful
The Integration tools and client installed just fine from the same download. Why didn't the database install successfully? All the other components seemed to install just fine and the database appeared to be created - but I could not open it and there was not start menu option for DBA Studio.
I am running Windows 2000 professional with Service Pack 3 on a 2 GHz Pentium4 machine with 512MB Rambus RAM, 32bit color graphics ATI All-in-Wonder card, about 40GB of disk space, a local peer-to-peer network via cat5 cable to another Win2k P3 machine, and Creative Soundblaster Audigy card. Do I need to adjust any network settings? Would it help or hinder if I installed MS IIS? WinNT has a Microsoft Transaction Server (MTS) but Win2k has COM+ instead; does that make a difference in terms of the installer looking for MTS? Do I need to configure COM+ in some special way / change settings?HI Salman,
I am doing the following.
1. I am installing Oracle 10.2.01 Database(Not Client) on my windows Xp laptop. While installation i Choose the custom option and Check the Oracle Windows Interface. In that i check the "Install Oracle Services for Microsoft Transaction server" checkbox. The installation goes on fine till 99% and when it tries to install the
Oracle Services for Microsoft Transaction server it gives an error saying that "Microsoft Transaction server" was not found on the system.
I had previously installed the same on my laptop and it was working fine. but after uninstallation when i try to re install i get this problem.
If i go to the services.msc option in windows i still see the OracleMTSRecoveryService option even when i have uninstalled oracle. But when i try to start the services i get the following error
Could Not start the OracleMTSRecoveryService on the local computer.
Error 3: The system cannot find the file specified.
Any help on how to resolve this issue will be highly appreciated -
Recieving ORA-01722 invalid number error while creating a materialized view
Hi,
I am receiving a ORA-01722 invalid number error while creating a materialized view. when run the select statement of the view i don't get any error, but when i use the same select statement to create a materialized view i receive this error. Could any please help in resolving this error. Here is the code i am using to create a materialized view.
CREATE MATERIALIZED VIEW MV_EBS_CH_CLOSED
REFRESH FORCE ON DEMAND
AS
SELECT DISTINCT kr.request_id, org.org_unit_name,
ebs_ch_ticket_type (kr.request_id) ticket_type,
DECODE
(kr.status_code,
'CLOSED_SUCCESS', kr.last_update_date,
'IN_PROGRESS', (SELECT MAX (start_time)
FROM ebs_ch_datastore ecd1
WHERE kr.request_id = ecd1.request_id
AND workflow_step_name =
'Final BA Review and Deployment Exit Criteria')
) closed_date,
substr(krhd.visible_parameter12,1,10) siebel_start_date,
kr.creation_date itg_start_date
FROM kcrt_requests kr,
kcrt_request_types krt,
kcrt_req_header_details krhd, kcrt_request_details krd1,
(SELECT koum.user_id user_id,
DECODE (koup.org_unit_name,
'IT Implementations', 'CHS - Service Management BA',
koup.org_unit_name
) org_unit_name
FROM krsc_org_unit_members koum, krsc_org_units koup
WHERE 1 = 1
AND 'Y' = koup.enabled_flag
AND koum.org_unit_id = koup.org_unit_id
AND EXISTS (
SELECT 'X'
FROM krsc_org_units kouc
WHERE koup.org_unit_id = kouc.org_unit_id
START WITH kouc.parent_org_unit_id =
ANY (SELECT org_unit_id
FROM krsc_org_units krsc_org_units1
WHERE 'Clearinghouse' =
org_unit_name)
CONNECT BY kouc.parent_org_unit_id =
PRIOR kouc.org_unit_id)
UNION
SELECT kou.manager_id user_id,
DECODE
(kou.org_unit_name,
'IT Implementations', 'CHS - Service Management BA',
kou.org_unit_name
) org_unit_name
FROM krsc_org_units kou
WHERE 'Y' = kou.enabled_flag
START WITH kou.parent_org_unit_id =
(SELECT org_unit_id
FROM krsc_org_units krsc_org_units2
WHERE 'Clearinghouse' = org_unit_name)
CONNECT BY kou.parent_org_unit_id = PRIOR kou.org_unit_id) org
WHERE krt.request_type_id = kr.request_type_id
AND krt.request_type_name IN ('Bug Fix', 'IT Enhancement')
and kr.REQUEST_ID = krd1.request_id
and krd1.batch_number = 1
AND kr.request_id = krhd.request_id
AND org.user_id in (krd1.parameter4, krd1.parameter5, krd1.parameter7)
AND ( 'CLOSED_SUCCESS' = kr.status_code
OR 'IN_PROGRESS' = kr.status_code
AND kr.request_id IN (
SELECT request_id
FROM (SELECT DISTINCT request_id,
MAX
(start_time)
closed_date
FROM ebs_ch_datastore
WHERE 'Final BA Review and Deployment Exit Criteria' =
workflow_step_name
GROUP BY request_id))
Thanks,
Shaik MohiuddinThis error occurs when you try to create a materialized view , but if you run the sql the results are perfectly fine. Well it happend to me also and to fix this I made sure all the coulmns have the same data type which are used in joins or in where clause.
use
where
to_number(col1)=to_number(col2) and to_number(col3)=to_number(col4)
hope this helps.. -
Error while executing the CKMLCP (Actual Costing) Transaction
Hi Expert,
I am getting the following Error while executing the CKMLCP (Actual Costing) Transaction through my User ID in system. If we execute the same transaction with other user id then there is no Error. same role is assign to both user. Try to check SU53 screen shot but it show no error
See the below error for referance:-
Internal error in program SAPLCKML_RUN_COCKPIT_ACT
Message no. CKMLRUN004
Diagnosis
An unexpected situation has appeared in program SAPLCKML_RUN_COCKPIT_ACT.
The problem has to do with a program error - the indirect result of a program error or an inconsistency in Customizing.
System Response
Processing had to be terminated.
Procedure
Inform your system administrator
Thanks
DineshHi Shyam,
Thanks Shyam,
I check this note this is not applicable for my system, In mention note Correction delivered in Support Package 600.
but support Package in my system SAP_APPL 603 SAPKH60303,
Is there any other note or solution for 603 SP
Thanks
Dinesh -
Error while cancelling the material document. MIGO
i am getting following error while cancelling material document
You cannot cancel GR, since inspection lot is already partly posted
Message no. QA046
Diagnosis
You are attempting to reverse a goods receipt although quantity postings have already been made from the inspection lot. This means that stock for the goods receipt has already been transferred and, for this reason, a cancelation of the document is no longer possible.
Procedure
Ensure that the postings in QM (within the usage decision transactions) are carried out.hi,
You can't do cancellation here just because you have given some lot/qty to QI:
2 ways:
1. Don't do cancellation, make returns for the rest of the qty...
2. Take back the qty in the Unrestrcited stock back and then try to do cancellations...
Regards
Priyanka.P -
Error while creating "RETURNS" as ERP Sales transaction type
Description: We are getting error while creating ERP SLO type "Returns-ZRE". Message prompts as "Creation of ERP Transaction failed". We do not get the message for other order types for example "Standard order".
Please suggest. Please note that this is an ERP sales order in CRM UI not a CR< sales order.
Thanks
ShreeIs this only for a particular order type?
As stated above this can be to do with user authorisations or the trusted RFC set up. Some things to check are:
- ST22 dumps in ECC
- ST01 authorisation trace for the user in ECC
- Trusted RFC connection set up -
Error while creating 2nd Material Receipt after reversal of 1st MR
Dear,
Facing an error while creating Material Receipt.
The gate entry of this material is 123456789.
The 1st MR was created on 10/02/2011 & no. was 12345 with Location ABC via Z T-code.
Under Quality this product was Rejected with Location XYZ.
Due to Material was Rejected in Quality this MR 12345 was reversed through MB01 which produced a Reversal number 67890.
Now the material is again on its original Location ABC.
Now when the user is again creating an MR on 17/03/2011 of this material present at ABC location via using Z T-code it is producing an error stating that M/R already processed against 123456789 gate entry.
We have done these several cases before also and there was no error shown when we created the 2nd MR for the same material after its reversal has been made.Dear,
Problem solved.
The problem was in PO.
The person had unchecked the GR-basediv which caused the real trouble. The MR number was not appearing in MB03 & material was rejected in the QA11 so it was reversed through MB01.
When again the MR was being punched then it was stating that the "MR already processed for the Gate Entry."
PO was changed, Bill No. was changed by adding "A" & later deleting this "A" from Table level. -
Error while running a BDC for the Transaction F-02
Hi,
I'm getting an error <b><i>"Parking not possible during Batch Input"</i></b> while running a BDC for the transaction F-02.
When i click on the error message it displays the message [b<i>]"In Customizing, you can control whether an error message is issued."</b></i>
How to solve this issue?.
Waiting for ur replies.........
Regards
N.SenthilHi,
When you are doing the recording in SHDB, and in the same screen where the TCODE to be recorded is given, there are options that you can choose called "Recording Parameters"...Select the checkbox which says "Not a Batch Input Session", this will set the sy-binpt variable to " "(in a recording by default it is "X")...and you will not get this error...
Also make sure while writing the BDC program to make use of the "bdc options" parameter which has this property to switch of sy-binpt...
Refer below theard for sample bdc code for f-02.
https://forums.sdn.sap.com/click.jspa?searchID=5126766&messageID=1538409
Regards -
Error while creating a material using Bapi_material_savedata
Hi,
there is an error encountered while creating a material using BAPI_MATERIAL_SAVEDATA..
The Error description is " Material description is not transfered " even after supplying the Material description and other mandatory field information like industrial sector, material type ,basic view indicator,Base UOM,Base UOM ISO code.
Please let me know the solution, if you know.Hi,
Please search the SCN for the answers
https://www.sdn.sap.com/irj/scn/advancedsearch?query=errorinBAPI_MATERIAL_SAVEDATA+&cat=sdn_all -
Invalid rowid error while running the snapshot agent in transactional replication
Hi All,
I am getting an Invalid rowid error while replicating an large tables i.e around 30 millions rows from oracle(publisher) to sql server(Subscriber) while running the snapshot agent in transactional replication.
Its taking around 18 hours and its then its throwing this error.
Is there any faster way that i can replicate the initial snapshot this large table as 18 hours is very high on time.
Kindly suggest.i am always got quick and accurate response always..hope the same in this case also.
Thanks,Hi,
Could you please create a replication with some small tables for a test?
You can disable the firewall on both sides and rerun snapshot. Enable verbose logging to level 4 for snapshot agent and check the results if it fails.
http://support.microsoft.com/kb/312292
Here is a document says for the error: ORA-10632: Invalid rowid Cause: Segment Highwatermark was overwritten due to shrink and space reused Action: Reissue this command.
I also suggest you contact the Oracle support team for further help.
Thanks.
Tracy Cai
TechNet Community Support -
Error while posting journal entry: -5012/unbalanced transaction
Hi everyone,
I got this error message when trying to add a FA Retirement. FA is dated 26.May.08, depreciated for the month of May 2008 and would like to be retired on 01.June.08 (sale with customer).
FA G/L Account Determination is completely defined.
Would appreciate any reply. Thanks in advance!
JacHi Jac,
1, There is a known issue in a lower version before 2005A SP01 PL30when you try to run a retirement operation for a fixed asset with Net Price equal to the Net Book Value, it failed and you got the following error message:
21141 error while posting journalentry: -5012 /Unbalanced Transaction.
If you are in this scenario, please upgrade your Fixed Assest to the latest patch.
2. If you are not in above scenario, this problem is possibly caused by the incorrect configuration of accounts in G/L
Account Determination.
There should not be 'Default VAT Group' related to these accounts except for account 'Default Revenue Acc. Retirement' in G/L Account Determination.
1) Go to Administration - Setup - Fixed Assets - Open G/L Account Determination;
2) Select an Account Determination Group;
3) Under the G/L Account Determination window, open the account linked to 'Balance Sheet of Asset Acc.' by clicking on the yellow arrow;
3) The Chart of Accounts window will open, click on the'Account Details' button beneath the window to open G/L Account Details;
4) Empty the field 'Default VAT Code';
5) Execute the Retirement functionality again.
You can also refer to SAP Note 1050423 for reference. https://service.sap.com/sap/support/notes/1050423
I hope it is helpful!
Regards,
Ivy Zhang
SAP Business One Forums Team -
Error while saving Excise Invoice in J1IIN Transaction.
Hi All,
While saving Excise Invoice in J1IIN Transaction, am getting the following errors.
1.Balance in Transaction Currency.
2.System failure during locking G/L account 7000 by 61110.
Pls provide me the solution.
Regards,
Sasi.Hi SASIKANTH,
Go thru the below issues, hope would be helpful.
1. Balance in Transaction Currency
Balance in transaction currency
Re: Balance in Transaction Currency
2.System failure during locking G/L account 7000 by 61110
System failure during locking GLaccount (the Company Code) by (GLaccount no
System failure during locking GL 401000
System failure during locking GLaccount 1000 by 43000130
Thanks,
Swamy H P -
Error while cancelling the material document.
HI,
while cancellation of material document thru MIGO screen getting error
Deficit of PU IR quantity 20.000 EA
Message no. M7021
Diagnosis
Shortfall below the specified stock level or quantity amounting to 20.000 EA.
Diagnosis
Shortfall below the specified stock level or quantity amounting to 20.000 EA.
The invoice of material document has been process thru ERS.....so no way we can cancel the invoice.
waht is the exact process to cancel this document which furher use ERS for invoice verification.
thanks.....Hi Ayaan,
You need to set the indicator against the movement type 102 under the following path :
SPRO>Materials Management>Inventory Management and Physical Inventory>Goods Receipt>For GR-Based IV, Reversal of GR Despite Invoice
Once set , try reversing the material document . This will work .
Regards
Ramesh Ch -
Tax code error while entering Expense Receipts in TRIP transaction
While entering Expense Receipts in the transaction TRIP (Travel Manager), I get an error saying..
"Entry TAXUSJ V0 does not exist in T007A (check entry)".
1) Please help me understand the cause for this error. As the Travel Expense system is connected to the FI (Finance) system, is any config in the FI table causing the error?
2) Please suggest how to resolve this error.
ThanksHi,
TAXUSJ--Sales Tax USA w. Jurisdictions and VO is a Tax code.
Please mainbtain above combinations in below tables and try
GOTO SM30
J_1BTAXCODEV
J_1BTXMMCV
V_T007A_DEF
Bhairavareddy
Edited by: Mudupu123 on Dec 14, 2010 8:04 AM -
Error while Change of material Type
Hi,
I have one material and the same material is present in our 3 company code and plant, the materila TYpe is HALB anf I want to change it to FG but while changing with MMAM first it was giving error that valuated stock is avalable then I have issue the material now my stock is zero but still it giving error that many PO exist and Porduction order exist, for the HALB valuation class is 2000 and for FG it is 3000,
How this probelm can be solve.
regards,
zafarHi,
While changing the Material Type, following points needs to be confirmed :-
1. There should be no stock against the materials. If there will be any stock against the materials, then u will have to nullify the stock for the materials.
2. There should be no open documents against the materials like PO, PR etc. In case if any open documents, same needs to be closed.
3. Also there should be no open reservation order against the materials.
Maybe you are looking for
-
Is there a way to use Itunes with a windows phone?
I just bought a windows phone and would like to bring in tracks from my Itunes library to use as ringtones. I have 5000+ tracks in my Itunes (for windows) library and refuse to purchase any more as ringtones. Is there a Itunes for windows phone app I
-
Help unable to install OS X as hard drive not visible in internet recovery mode
Hi I have a MacBook Pro During use my screen froze and I had to force quit. Since then I have tried the following: Turning on in safe mode Internet recovery - no mac hd or partition recovery drive are visible in disk utility only OS X base system Una
-
Keypress listener anywhere in a JFrame
Hello! I want to listen for a keypress (F12) from anywhere in my JFrame window, exactly like if I added a menubar with an accelerator. I can't just register a KeyListener on the JFrame because I have serveral panels on it. Any ideas? //John
-
Oracle 10g BI portlet to be integrated with IBM Webspehere portal
We have Oracle 10g BI as a solution for DWH, We intend to make the access available through one of the Standard JSR 168 portal. Is it possible to publish these reports on IBM Websphere Portal. If yes are there some resources available for the same Su
-
Multiple value selection in view criteria bug in 11.1.2
I've also encountered this problem in 11.1.2: Feature Obsolete in JDev. 11.1.2? Is there a bug number I can track for this? Thanks, Bob