Error while maintaing Current budget-funds Management

Hi ,
In Production system when go to create current budget using tcode-FR50 for Fund Center and commitment Item system is giving error of "budget exceed " with some amount and not allowing to maintain the budget.
In fund center hierarchy i have checked fund centers are properly maintained but what is the reason of this error im not understanding.If anybody came across the same kind of error then give solution.
Regards
Deepa

thats gt the solution

Similar Messages

  • Error while Activating Activate Global Funds Management Functions (PSM-FM)

    Hi,
    I am getting the below error while activating Activate Global Funds Management Functions (PSM-FM) in Funds Management.
    Aktivierung des Haushaltsmanagements ist nicht erlaubt
    Message no. ZZ003
    Kindly help me in fix this issue....
    Thanks
    Kishore

    Hi,
    Thanks for your reply. But can you clarify me why we need to delete the row Z_LEAVE in SE11 for FMISPS table. Because here ABAPER is objecting to do this as they feel there may be some impact if we delete this.
    Kindly clarify me
    Thanks
    Kishore

  • Error while settlement of WBS - Funds Management

    Hi,
    We have maintain derivation rule as - WBS to Fund Center. This Fund center is DUMMY because we need not want to control WBS through Funds Management.
    There is always one Cost center in each WBS. while settling this WBS we are getting error as -
    Asset ABC 000127000000 0000: no subnumber with FM assignment DUMMY / /
    Message no. AW851
    ABC - Company code
    000127000000 - asset number
    DUMMY - Fund center
    suggest.

    alex ice wrote:
    Hi, 1 change FC in AS02 to dummy if it applicable.
    > 2 Check note 618269 it applicable.
    > 3 remove FC from asset master data
    Hi Alex, how are u!?
    I've got the same issue than Harsh Vaidya in my system ...
    Ive already read this notes: [618269|https://service.sap.com/sap/support/notes/618269] (no apply to me, because Joint Venture Accounting isn't active), [844262|https://service.sap.com/sap/support/notes/844262], [1473357|https://service.sap.com/sap/support/notes/1473357], [446029|https://service.sap.com/sap/support/notes/446029] and [440396|https://service.sap.com/sap/support/notes/440396]
    All very interesting notes :P
    But... I couldn't find the solution
    I try to TRACE from FMDERIVE too, but when I go to KO88, FMDERIVE's trace doesn't track anything.
    Any help to throw some more light on this thread, would be very useful.
    Thanks a lot!
    Regards from Argentine.

  • Operation not found error while calling AM methods from managed bean

    Hi,
    operation not found error while calling AM methods from managed bean.
    written a method with two parameters in AM.
    exposed the method in AM client interface
    in the page bindings added the method in method action ..left empty in the value fields of the parameters.
    calling the method from managed bean like below
    String userNameVal = (String)userName.getValue();
    String passwordVal = (String)password.getValue();
    OperationBinding operationBinding =
    ADFUtils.findOperation("verifyLogin");
    operationBinding.getParamsMap().put("userName",userNameVal);
    operationBinding.getParamsMap().put("password",passwordVal);
    operationBinding.execute();
    i am getting operation verifyLogin not found error.Please suggest me something to do.
    Thanks
    Satya

    Hi vlsn,
    Can you try with the below code
    // in your backing bean
    OperationBinding operation = bindings.getOperationBinding("verifyLogin");
    //Put your both parameters here
    operation.getParamsMap().put("parameter_name1", parameterValue1);
    operation.getParamsMap().put("parameter_name2", parameterValue2);
    operation.execute();
    if (operation.getResult() != null) {
    Boolean result = (Boolean) operation.getResult();
    and share the result.
    regards,
    Rajan

  • Budget-fund management issue

    Fund Management is active for 1000 and 4000 company codes.
    Accordingly we have created budgets for year 2010 and raised number of
    PR/POs against this budget up to 31.03.2011.
    There are certain POs (Open POs) raised on or before 31.03.2011
    against which services/goods received on or after 01.04.2011.  At the
    movement system is checking 2011 budget for the POs raised against
    2010 budget, as we have not done the closing operation for FM module.

    Hi Alex,
    I have checked In EKPO table field BEDAT is not available but AEDAT is there date 28.03.2011. FM document was not posted for the PO, while posting MIRO document, we are getting error message * Annual budget exceeded for the year 2011 amount 10000*.
    Po's are posted in the previous fiscal year and invoice entering in the current year.
    Thanks,
    Ratnam

  • Error while maintaing a loan type for an employee

    Hi gurus
    This is in regard to the Loan while maintaing for an employee through PA30
    " Employee 002 is not eligible for the loan 7501 on 01.10.2008" though i tried to Maintain it for different dates still iam not able to maintain.
    Even i tried maintaing different loan type for the same employee its still pops with the same error message
    Even i cross chked the dates of the configuration every config start date from 1990/1995
    where as 7501 and 7401 are my loan types
    Pls advise
    Rgds
    M Bharath

    I have the same issue.
    How you solved it?

  • Error While posting the Budget Update(BPUP)

    We are getting an error message u201CError when saving the Budget Updateu201D while posting the Budget Update (BPUP). I have filed all mandatory requirements in the transaction.
    I couldnu2019t able to find out reason for this error message. Please help me on this.

    Hi,
    Where you able to resolve your issue, I would appreciate if you can share the solution.
    Thanks

  • ERROR WHILE STARTING SERVICE AT ENTERPRISE MANAGEMENT IN OBIEE11G

    Hi,
    I am facing error while uploading RPD in to Enterprise Management.
    When starting Services iam able to start all except "BISERVICES". It is showing 80% success and 20% failed.
    By seeing the error iam able to find it is problem with server.
    Can any help in this regard.
    Below is the error iam facing.
    Message ID     EM-02694
    Message Level     1
    dcid     63595f90fef1a08d:515de89f:1345a56bb43:-8000-00000000000014af
    Relationship ID     1:19282
    Argument 1     BI_INSTANCE:coreapplication;FAILED_TO_START;Error in starting one or more components of BI Instance; Please check the server log files for detailed message.
    Component     AdminServer
    Module     oracle.sysman.emai.view.bi.impl.ProgressDialogHelper
    Host     test.transsys.com
    Host IP Address     192.168.1.5
    User     weblogic
    Thread ID     Thread-1915
    ECID     0000JI2wDyvFg4WFLzuHOA1Ew3RC000104
    Message     Supplementary information regarding operation: BI_INSTANCE:coreapplication;FAILED_TO_START;Error in starting one or more components of BI Instance; Please check the server log files for detailed message.

    Hi ,
    THANKS FOR UR RESPONSE
    Iam not able to stat r stop the services( IAM NEW TO OBIEE11G)
    Iam getting following error
    RCV: Permission denied
    Communication error with the OPMN server local port.
    Check the OPMN log files
    /software/Middleware/Oracle_BI1/opmn/bin/opmn: unexpected exit: code 512
    opmnctl start: opmn failed to start.
    this is what my opmn log file shows
    [2011-12-28T11:56:16][opmn][NOTIFICATION:1][90][OPMN]ONS server initiated
    [2011-12-28T11:56:16][opmn][NOTIFICATION:1][522][OPMN][code:pm-internal]PM state directory exists: /software/Middleware/instances/instance1/config/OPMN/opmn/states
    [2011-12-28T11:56:16][opmn][NOTIFICATION:1][675][OPMN][code:pm-internal]OPMN server ready.  Request handling enabled.
    [2011-12-28T11:56:16][opmn][ERROR:1][17][OPMN][code:ons-listener]127.0.0.1,9502: BIND (Address already in use)                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Error while maintaing olap 11g cube

    Hi,
    Iam getting the below error while trying to maintain the cube
    An error has occurred on the server
    Error class: Express Failure
    Server error descriptions:
    INI: Error creating a definition manager, Generic at TxsOqConnection::generic<BuildProcess>
    INI: XOQ-01724: Can not specify a USING clause with a rewrite MV cube, Generic at TxsOqBuildProcessor::initializeForDimension
    at oracle.olapi.data.source.DataProvider.callGeneric(Unknown Source)
    at oracle.olapi.data.source.DataProvider.callGeneric(Unknown Source)
    at oracle.olapi.data.source.DataProvider.executeBuild(Unknown Source)
    at oracle.olap.awm.wizard.awbuild.UBuildWizardHelper$1.construct(Unknown Source)
    at oracle.olap.awm.ui.SwingWorker$2.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    ALso when I try to drop the cube/dimension , I get the following error
    An error has occurred on the server
    Error class: Express Failure
    Server error descriptions:
    DPR: Unable to create server cursor, Generic at TxsOqDefinitionManager::generic<CommitRoot>
    INI: XOQ-00703: Error executing OLAP DML command "(AW ATTACH CBU_UNIFIED.RECHARGES RW : ORA-34738: A severe problem has been detected. Analytic workspace operations have been disabled.
    )", Generic at TxsOqAWManager::executeCommand

    The two errors are, I suspect, unrelated.
    The XOQ-01724 error happens if you attempt to execute dbms_cube with a script that contains a USING clause. This is allowed for most cubes, but not for cubes associated with a materialized view. If this is what you tried to do, then the error is expected and the solution is to not specify a USING clause or to drop the MV.
    The second error is much more serious since it means your AW is probably corrupted. Did this happen after a failed parallel build? What version are you using.

  • Error while activating Queue XBTR* in Manage Queues in TCODE sxmb_adm

    Hello Experts,
    SAP PI is sending the data to ECC through inbound proxy in PI SXMB_MONI it is showing Black colur flag as it is through but in R3 SXMB_MONI messages  are in green colur flag showing it is in scheduled state.Data is in quues in SMQ2.
    While i try to activate queues in SXMB_ADM it throwing as Error while activating Queue XBTR*
    XBTR Queue is in SMQ2.
    Regards
    Naresh

    Hello Naresh,
    Check if the queue XBTR* is already registered in your SAP R3 server.
    You have to do it first, if not already done.
    Regards,
    Subhajit

  • Error while trying to start Enterprise manager(Data Base Control)

    We are getting error while trying to start the EM Database Control in database 11g (11.1.0.6).The error is given below.
    #emctl start dbconsole
    OC4J Configuration issue. /user1/oracledb/app/testdb/product/11.1.0/db_1/oc4j/j2ee/OC4J_DBConsole_appvserver.rssoftware.com_ORCL not found.
    How to resolve this issue?
    Regards,
    Rup

    Check here:
    OC4J Configuration issue.
    http://arjudba.blogspot.com/2008/04/troubleshooting-dbconsole-error-oc4j.html
    HTH
    -Anantha

  • Internal Server error while approving leave in absence management

    hi
    In my project absence mgt is applicable for Netherland employees. When an NL manager applies leave and his manager from puerto rico tries to approve it from UWL , the manager is getting the following ERROR on clicking on the leave request in his inbox task.
    500   Internal Server Error   Web Dynpro Container/SAP J2EE Engine/6.40 
    Failed to process request. Please contact your system administrator.
    Error Summary
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Root Cause
    The initial exception that caused the request to fail, was:
       java.lang.NullPointerException:
        at com.sap.xss.hr.lea.form.edit.VcFormEdit.setReadOnlyApprover(VcFormEdit.java:467)
        at com.sap.xss.hr.lea.form.edit.VcFormEdit.onInit(VcFormEdit.java:269)
        at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEdit.onInit(InternalVcFormEdit.java:700)
        at com.sap.xss.hr.lea.form.edit.VcFormEditInterface.onInit(VcFormEditInterface.java:165)
        at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEditInterface.onInit(InternalVcFormEditInterface.java:158)
        ... 37 more
    This UWL error in Leave approval workflow is coming ONLY when PR manager is trying to NL employee's leave .
    All other country managers ( US , CH , FR etc) are able to approve the leave without any issue.
    We are using the standard leave approval workflow.
    ANY SOLUTIONS Plzz???

    Hello
    The above issue can occur if the rule group , to which this employee belongs, the leave type is not configured correctly. Please check the view V_T556A_WEB. The leave type and the rule group need to be defined here .
    Also make sure that the counting rule for the leave type is also  define correctly in T556C. Once the leave type for the approver  which belongs to the rule group has been correctly configured, way it has been done for normal employees, there will not be any issue.
    Kindly complete the necessary customizing  and check your results.
    Thanks and kind Regards
    Ramana

  • Release Management Update 4-Errors while loading releases in Release Managment Client Interface.

    Hi Team,
    We are using Release Management from last 8 months and we upgraded to Release Management Update 4 and using it from last 4 months. Currently we are creating around 50-60 releases daily, but we are facing below issues from last few days with
    Releases tab and no issues with other tabs (Administration, Inventory, Configure Paths and Configure Apps)
    Release Management Client interface is taking long time when we are opening it.
    Throwing error when we are clicking on Releases link in Releases tab.
    Throwing error when we are creating new releases.
    Please find the error log below:
    Timestamp: 3/27/2015 6:49:44 PM
    Message: Error thrown while executing the stored procedure ReleaseV2_List with parameters , @FilterXml:<Filter StatusId="0" DateStatusId="1" ApplicationVersionId="0" StageId="0" IsDeferred="0" UserId="9002"
    />, @PartitionId:1.
    Timestamp: 3/27/2015 6:49:44 PM
    Message: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.: \r\n\r\n   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
       at System.Data.SqlClient.SqlDataReader.get_MetaData()
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
       at System.Data.SqlClient.SqlCommand.ExecuteXmlReader()
       at Microsoft.TeamFoundation.Release.Sql.OnPrem.OnPremDbAccessor.ExecuteXmlStoredProcedure(String storedProcedureName, Hashtable xmlParameters, String rootElementName, Boolean addRequestorParameter)
    Timestamp: 3/27/2015 6:49:44 PM
    Message: The wait operation timed out: \r\n\r\n
    Timestamp: 3/27/2015 6:49:44 PM
    Message: Exception has been thrown by the target of an invocation.: \r\n\r\n   at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean&
    bNeedSecurityCheck)
       at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
       at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
       at System.Activator.CreateInstance[T]()
       at Microsoft.VisualStudio.Release.ViewModel.ViewModels.WorkspaceTabViewModel`1.get_DefaultViewModel()
    Timestamp: 3/27/2015 6:49:44 PM
    Message: The remote server returned an error: (500) Internal Server Error.: \r\n\r\n   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at Microsoft.TeamFoundation.Release.Data.WebRequest.PlatformHttpClient.EndGetResponse(IAsyncResult asyncResult)
       at Microsoft.TeamFoundation.Release.Data.WebRequest.RestClientResponseRetriever.EndGetAsyncMemoryStreamFromResponse(IAsyncResult asyncResult, IPlatformHttpClient platformHttpClient)
       at Microsoft.TeamFoundation.Release.Data.WebRequest.RestClientResponseRetriever.EndDownloadString(IAsyncResult asyncResult, IPlatformHttpClient platformHttpClient)
       at Microsoft.TeamFoundation.Release.Data.WebRequest.RestClient.EndPost(IAsyncResult asyncResult)
       at Microsoft.TeamFoundation.Release.Data.Proxy.RestProxy.HttpRequestor.<>c__DisplayClass1.<GetPostCaller>b__0(String url, String body)
       at Microsoft.TeamFoundation.Release.Data.Proxy.RestProxy.BaseReleaseV2ServiceProxy.ListReleases(String filterXml)
       at Microsoft.TeamFoundation.Release.Data.Model.ReleaseV2.LoadListXml(String filterXml)
       at Microsoft.TeamFoundation.Release.Data.Model.ModelFactory.LoadListElements[T](String filterXml)
       at Microsoft.VisualStudio.Release.ViewModel.ViewModels.ReleasesViewModel.LoadElements(String filterXml)
       at Microsoft.VisualStudio.Release.ViewModel.DataAccess.ElementRepository.LoadElements(String filterXml)
       at Microsoft.VisualStudio.Release.ViewModel.ViewModels.ListWorkspaceViewModel.Initialize()
       at Microsoft.VisualStudio.Release.ViewModel.ViewModels.ReleasesViewModel..ctor()
    Timestamp: 3/27/2015 6:49:44 PM
    Message: The remote server returned an error: (500) Internal Server Error.: \r\n\r\n   at Microsoft.TeamFoundation.Release.Common.Presentation.Binding.OnDatabindingException(Object bindingExpression, Exception exception)
       at System.Windows.Data.Binding.DoFilterException(Object bindExpr, Exception exception)
       at System.Windows.Data.BindingExpression.CallDoFilterException(Exception ex)
       at System.Windows.Data.BindingExpression.ProcessException(Exception ex, Boolean validate)
       at System.Windows.Data.BindingExpression.UpdateSource(Object value)
       at System.Windows.Data.BindingExpressionBase.UpdateValue()
       at System.Windows.Data.BindingExpression.UpdateOverride()
       at System.Windows.Data.BindingExpressionBase.Update()
       at System.Windows.Data.BindingExpressionBase.ProcessDirty()
       at System.Windows.Data.BindingExpressionBase.Dirty()
       at System.Windows.Data.BindingExpressionBase.SetValue(DependencyObject d, DependencyProperty dp, Object value)
       at System.Windows.DependencyObject.SetValueCommon(DependencyProperty dp, Object value, PropertyMetadata metadata, Boolean coerceWithDeferredReference, Boolean coerceWithCurrentValue, OperationType operationType, Boolean isInternal)
       at System.Windows.DependencyObject.SetCurrentValueInternal(DependencyProperty dp, Object value)
       at System.Windows.Controls.Primitives.Selector.UpdatePublicSelectionProperties()
       at System.Windows.Controls.Primitives.Selector.SelectionChanger.End()
       at System.Windows.Controls.Primitives.Selector.SetSelectedHelper(Object item, FrameworkElement UI, Boolean selected)
       at System.Windows.Controls.Primitives.Selector.NotifyIsSelectedChanged(FrameworkElement container, Boolean selected, RoutedEventArgs e)
       at System.Windows.Controls.Primitives.Selector.OnSelected(Object sender, RoutedEventArgs e)
       at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
       at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
       at System.Windows.UIElement.RaiseEvent(RoutedEventArgs e)
       at System.Windows.Controls.TabItem.OnSelected(RoutedEventArgs e)
       at System.Windows.Controls.TabItem.OnIsSelectedChanged(DependencyObject d, DependencyPropertyChangedEventArgs e)
       at System.Windows.DependencyObject.OnPropertyChanged(DependencyPropertyChangedEventArgs e)
       at System.Windows.FrameworkElement.OnPropertyChanged(DependencyPropertyChangedEventArgs e)
       at System.Windows.DependencyObject.NotifyPropertyChange(DependencyPropertyChangedEventArgs args)
       at System.Windows.DependencyObject.UpdateEffectiveValue(EntryIndex entryIndex, DependencyProperty dp, PropertyMetadata metadata, EffectiveValueEntry oldEntry, EffectiveValueEntry& newEntry, Boolean coerceWithDeferredReference, Boolean coerceWithCurrentValue,
    OperationType operationType)
       at System.Windows.DependencyObject.SetValueCommon(DependencyProperty dp, Object value, PropertyMetadata metadata, Boolean coerceWithDeferredReference, Boolean coerceWithCurrentValue, OperationType operationType, Boolean isInternal)
       at System.Windows.DependencyObject.SetCurrentValueInternal(DependencyProperty dp, Object value)
       at System.Windows.Controls.TabItem.OnPreviewGotKeyboardFocus(KeyboardFocusChangedEventArgs e)
       at System.Windows.UIElement.OnPreviewGotKeyboardFocusThunk(Object sender, KeyboardFocusChangedEventArgs e)
       at System.Windows.Input.KeyboardFocusChangedEventArgs.InvokeEventHandler(Delegate genericHandler, Object genericTarget)
       at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
       at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
       at System.Windows.UIElement.RaiseTrustedEvent(RoutedEventArgs args)
       at System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
       at System.Windows.Input.InputManager.ProcessStagingArea()
       at System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
       at System.Windows.Input.KeyboardDevice.TryChangeFocus(DependencyObject newFocus, IKeyboardInputProvider keyboardInputProvider, Boolean askOld, Boolean askNew, Boolean forceToNullIfFailed)
       at System.Windows.Input.KeyboardDevice.Focus(DependencyObject focus, Boolean askOld, Boolean askNew, Boolean forceToNullIfFailed)
       at System.Windows.Input.KeyboardDevice.Focus(IInputElement element)
       at System.Windows.UIElement.Focus()
       at System.Windows.Controls.TabItem.SetFocus()
       at System.Windows.Controls.TabItem.OnMouseLeftButtonDown(MouseButtonEventArgs e)
       at System.Windows.UIElement.OnMouseLeftButtonDownThunk(Object sender, MouseButtonEventArgs e)
       at System.Windows.Input.MouseButtonEventArgs.InvokeEventHandler(Delegate genericHandler, Object genericTarget)
       at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
       at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       at System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
       at System.Windows.UIElement.OnMouseDownThunk(Object sender, MouseButtonEventArgs e)
       at System.Windows.Input.MouseButtonEventArgs.InvokeEventHandler(Delegate genericHandler, Object genericTarget)
       at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
       at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
       at System.Windows.UIElement.RaiseTrustedEvent(RoutedEventArgs args)
       at System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
       at System.Windows.Input.InputManager.ProcessStagingArea()
       at System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
       at System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
       at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
       at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, WindowMessage msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
       at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
       at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)
    Please help us.
    Thanks & Regards,
    Ramakrushna Parupalli

    Hi Ramakrushna,
    For the situation, you can connect to the database of Release Management, and check whether you can execute stored procedure ReleaseV2_List manually.
    You can also try to clean some of releases records if possible to check if the timeout issue can be resolved. Or you can set the timeout configuration of Release Management to a larger value. Refer to this
    thread for more information.
    Another option is check event logs to see if there any useful informaiton, and repair Release Management on your server machine if possible. If the problem still exist after taking the methods I mentioned above, please elaborate more details about your scenario.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • BB 8130 Error while Updating OS in Device Manager

    OK, Hi everyone say hey to the new guy, now help him out! I was just trying to update my BB 8130 with the Alltel 4.5 OS and Device Manager 4.7, But while the program was in the stage of "Reconnecting to JVM," it closed the updater and said Error: Could not reconnect to Blackberry. MY PHONE WON'T DO ANYTHING!!! It's stuck on a screen with a window with some shapes in it and a huge crossed-circle over it. It won't leave this page! When I try reconnecting to the computer, Device Manager doesn't recognize it as a phone. It does nothing. Has anyone else had this issue? I am using XP 32-bit. If anyone can help me out, please do so. Thanks!

    Hi and welcome to the forums!
    Try this procedure, you will have to join the other forum to get the utility.
    Thanks,
    Bifocals,
    http://blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Error while Releasing the budget

    Hi Gurus,
    We had activated AVAC at budget release (Overall & Release) with Error at 100% budget consumption. I am doing cost planning at activity level (Assigned Component, which will be effective after Activity release). When I try to release the budget, system gives an error message that Budget is exhausted. For eg. I had planned for 920/- and releasing the budget exactly for the same amount, system gives an error message ( Message no. : BP607),
    Item WBS element XXX budget exhausted
    Message no. BP607
    Diagnosis
    Budget  is exhausted in document item WBS element XXX.
    Whereas if I do the Cost planning at CJ40, I am  not facing this problem. But the requirement is to do Network planning for some cases. How to overcome this issue ?
    thanks in advance.

    Hi,
    Just check if the value you plan in Network is increasing the Assigned value for the Network. That Will consume the budget.
    Available Bud = Budget - Assigned Value.
    To avoid this Untick Assign Funds in plan indicator in OPSV T-code for Order category 20 and all Order types.
    Then Planned Values in Network will not increase assigned value and hope issue will get resolved
    Thanks
    Saikishore.Ganga

Maybe you are looking for