Error While manually updating xperia sola to android 4

hi
I did the following download and install the latest Fashtool software ( flashtool-0.9.10.1-windows ) and I had installed the drivers .exe in the drivers folders
and selected all the devices and I am not able to flash sola to the new version of android
the log file at the link
Please help guys :'(
Solved!
Go to Solution.

Haha
Glad to hear things worked out!
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

Error while schedulingg update stat in db13

Dear Experts,
Please look into my issue we are facing an error while scheduling update statistics in db13 and I tried to open detailed log
It is given
SXPG_COMMAND_EXECUTE failed for BRTOOLS - Reason: program_start_error: For More Information, See SYS
Please help me how to solve this my error
Regards

Hi,
Check the owner for BRBACKUP, BRARCHIVE, and BRCONNECT in kernel,
these files should be with SIDADM, if not change the owner to SIDADM and rerun the update stats.
and also Refer the note 446172
Regards,
Ram

Error while activating update rule in Inventory

I was working with migration of datasource 2LIS_03_BF from 3.x to 7.0 in MM module.
Recieved an error while activating update rule 0RT_C17 2LIS_03_BF in Inventory module.
When I checked the routine ,it shows the following error.
Errror:E:The Dictionary structure or table "/BI0/PMAT_SALES" is either not active or does not exist.
I am not usre how to resolve this.
Kindly reply asap.

1. Activate the master data infoobject for 0MAT_SALES at info object level of RSA1
2. Replicate and Activate the data source once again by using the program > SE38 : RS_TRANSTRU_ACTIVATE_ALL
3. Then try to migrate you datasource and activate you update rules.
it may help you
Regards.
Rambabu

Updating Xperia sola to ICS

Hi,
I am using Xperia sola for the past 1yr i am having gingerbird OS in SOLA
i want to know is that good to update Xperia sola to ICS or use the sola with GB is best.

There are a number of topics on this forum regarding this particular topic. It is very much a personal choice though I would advise reading through some of the other posts to gauge general opinion on the topic.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Error while downloading updates on ZTE Open

Hello, sorry guys for asking lot of questions. I have purchased ZTE Open from ebay store(UK) and i wanted to update my phone to FF OS(1.1) but when i click on Check Now button after sometime it says "Error While Downloading Updates"
Any Solution?

OTA 1.1 is still delayed to be pushed, hopefully soon. What you are seeing is a bug that ZTE are aware off & should be fixed with next round of updates. Ignore for now. It's not 1.1, or any update for that matter, just a false alarm.

How to "manually" update Xperia S LT26i 2.3.7 build number 6.0.A.3.67, 73, .75 & .76

Hi,
I would like to be able to update my phone's software from Android version 2.3.7 to the newest Jellybean update. However, when I go to the update centre on both my phone and laptop software it tells me that my phone already has the latest available application updates and system updates. I've read that Jellybean was released for this phone model (Xperia S, LT26i, 6.0.A.3.62) in 2013, so I'm curious as to why it won't find an update for my phone? I would really appreciate any help in this issue. Network is Vodafone Ireland, if relevant.

http://talk.sonymobile.com/t5/Xperia-S-SL-acro-S/How-to-manually-update-root-downgrade-2012-Xperias/...
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Reason for Error in Manual Update of Data Package

Hey,
Sometimes while loading huge amount of data, one of the data package doesnt get uploaded. For those data packages we do a manual update of the data package and it works well.
My question is why do we get this error,
Is it to do with the system contention or any IDOC issue?
Please help me out to find the root cause of this, so that we can avoid the manual update of the data packges.

We usually get this issue , when we are doing a lot of processing in the Update Rules. The Data package processing gets timed out.
If it is happening very often then you would need to sit with your Basis person and modify the Timeout settings for your system.

Error while Transporting Update Rules.

hi xperts,
   I am getting Error while Transporting the Update rules,i already transported the INFOCUBE,INFOPACKAGE EVERYTHING.
    Start of the after-import method for object type R3TR ROUT (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Is the error,I didn't change any thing in the Cube or changes to Update rules.
Can anybody Help me?.
   thanking you,
                               with regards,
                               Narendra.

Hi,
Are you still facuing the issue ?
No need to worry about the routines, once you save the update rules if there is any routines in it it will be saved in the same request. If you want to check the routines you can check in the transport connections. Transfer the update rule to the right hand side of the screen and you can see all the routines that belong to the UR.
If you know the technical names of the routines you can check in the TADIR table.
Have you transported the info-sources for this update rules ? why not you again capture the info-source and the update rule in a single request and transport again.
Hope it helps.
Thanks,
Soumya

Error while transporting update rule.

Hi experts
I am trying to transport one update rule to production..
But it is ending with error code 8 n it is giving me following error :
      Errors when activating update rule XXX
      IC=0PP_DS03 IS=0CO_OM_OPA_6 error when checking update rules
Kindly tell me what need to be done now.
Regards
Swati

Hi Swati,
Before transporting the update rule, in the present scenario, you have to transport the infosource which contains the corresponding "0recordmode".
Whenever you transport anything into the quality or production, the list should be as followed in the given manner :
Seq No     Objects in Request
1     Package(DEVC), InfoArea(AREA), Application Component(APCO)
2     Function Modules
3     Keyfigure Catalog(IOBC), Keyfigures(IOBJ), Units(IOBJ)
4     Characteristic Catalog(IOBC), Characteristic Infoobjects(IOBJ)
5     Infosources (ISCS, ISTD, ISMP, ISTS, ISFS, ROUT) and
                Generic Data Sources(DataSrce Active Version(OSOA), ISMP, ISTS,DataSourceReplica (ISFS)
                and Tables (TABL)
6     Infoproviders(ODS(ODSO), Cube(CUBE), Infoset(ISET))
7     Update Rules(UPDR, ROUT)
8     Infopackages(ISIP)
9     Queries(ELEM)
10     Webtemplates(TMPL, BLTM, BPTM)
Just transport all your things in the above sequence, and it will be done successfully.
Also, remember there should not be any data in the corresponding infoprovider while you transfer the update rule, else it will fail.
Hope it helps,
Regards,
Neha.

ARP_PROC_RECEIPTS1.update_cash_receipt throws error while manual execution

Hi All,
I am working on oracle apps AR implementation process in r12.
I have a requirement for updating the receipt information in my custom code, so i am using using ARP_PROC_RECEIPTS1.update_cash_receipt procedure for updating the receipt details.
But i am facing following errors while executing this procedure.
Error
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "APPS.ARP_PROC_RECEIPTS1", line 1775
ORA-06512: at line 235
I am passing following input parameters for this oracle procedure.
p_cash_receipt_id: 152443
p_status: CONFIRMED
p_currency_code: USD
p_amount: 55
p_pay_from_customer: 117738
p_receipt_number: 10723
p_receipt_date: 19-JAN-13
p_gl_date: 19-JAN-13
p_maturity_date: 19-JAN-13
p_comments:
p_exchange_rate_type:
p_exchange_rate:
p_exchange_date:
p_attribute_category:
p_attribute1:
p_attribute2:
p_attribute3:
p_attribute4:
p_attribute5:
p_attribute6:
p_attribute7:
p_attribute8:
p_attribute9:
p_attribute10:
p_attribute11:
p_attribute12:
p_attribute13:
p_attribute14:
p_attribute15:
p_override_remit_account_flag: Y
p_remittance_bank_account_id: 10010
p_customer_bank_account_id:
p_customer_site_use_id: 13878
p_customer_receipt_reference:
p_factor_discount_amount:
p_deposit_date: 19-JAN-13
p_receipt_method_id: 1121
p_doc_sequence_value: 10723
p_doc_sequence_id: 500
p_ussgl_transaction_code:
p_vat_tax_id:
p_confirm_date: 19-JAN-13
p_confirm_gl_date: 19-JAN-13
p_unconfirm_gl_date:
p_postmark_date:
p_rate_adjust_gl_date:
p_new_exchange_date:
p_new_exchange_rate:
p_new_exchange_rate_type:
p_gain_loss:
p_exchange_rate_attr_cat:
p_exchange_rate_attr1:
p_exchange_rate_attr2:
p_exchange_rate_attr3:
p_exchange_rate_attr4:
p_exchange_rate_attr5:
p_exchange_rate_attr6:
p_exchange_rate_attr7:
p_exchange_rate_attr8:
p_exchange_rate_attr9:
p_exchange_rate_attr10:
p_exchange_rate_attr11:
p_exchange_rate_attr12:
p_exchange_rate_attr13:
p_exchange_rate_attr14:
p_exchange_rate_attr15:
p_reversal_date:
p_reversal_gl_date:
p_reversal_category:
p_reversal_comments:
p_reversal_reason_code:
p_dm_reversal_flag: N
p_dm_cust_trx_type_id:
p_dm_cust_trx_type:
p_cc_id:
p_dm_number:
p_dm_doc_sequence_value:
p_dm_doc_sequence_id:
p_tw_status:
p_anticipated_clearing_date:
p_customer_bank_branch_id:
p_global_attribute1:
p_global_attribute2:
p_global_attribute3:
p_global_attribute4:
p_global_attribute5:
p_global_attribute6:
p_global_attribute7:
p_global_attribute8:
p_global_attribute9:
p_global_attribute10:
p_global_attribute11:
p_global_attribute12:
p_global_attribute13:
p_global_attribute14:
p_global_attribute15:
p_global_attribute16:
p_global_attribute17:
p_global_attribute18:
p_global_attribute19:
p_global_attribute20:
p_global_attribute_category:
p_issuer_name:
p_issue_date:
p_issuer_bank_branch_id:
p_application_notes:
p_new_state:
p_new_state_dsp:
p_new_status:
p_new_status_dsp:
p_form_name: ARXRWRCT
p_form_version: 70.1
p_payment_server_order_num:
p_approval_code: 1234567890
p_legal_entity_id: 204
p_payment_trxn_extension_id: 80539
p_automatch_set_id:
p_autoapply_flag:
Could you please help.
Thanks,

I have a requirement for updating the receipt information in my custom code, so i am using using ARP_PROC_RECEIPTS1.update_cash_receipt procedure for updating the receipt details. Do you have the latest patches applied?
After applying Patch 13694711 Unable To Update Anything After Saving As An Unidentified Receipt Or Unapplied Receipt [ID 1433035.1]
Comments on Receipts Window Cannot be Updated to NULL [ID 1470192.1]
But i am facing following errors while executing this procedure.
Error
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "APPS.ARP_PROC_RECEIPTS1", line 1775
ORA-06512: at line 235Please check line 235 in the package body code and make sure you are passing the correct value.
OERR: ORA 6502 PL/SQL: numeric or value error [ID 20063.1]
Master Note for Diagnosing ORA-06502 Error [ID 1137237.1]
Thanks,
Hussein

Getting Error while deploying ADF Mobile App in android Emulator

Hi All,
I am getting following error while deploying mobile app into android emulator........i have gone through google search and i hve done with all the steps...as follows
1. keytool -genkey -v -keystore debug.keystore -alias androiddebugkey -keyalg RSA -keysize 2048 -validity 10000
i gave password, last name ,organization, state and country
2. jarsigner -sigalg MD5withRSA -digestalg SHA1 -verbose -keystore /Users/Admin/.android/debug.keystore C:\JDeveloper\mywork\GeneralMobileApp\deploy\ANDROID_MOBILE_NATIVE_archive1/generalmobileapp.apk
3. /platform-tools/adb -e install -r C:\JDeveloper\mywork\GeneralMobileApp\deploy\ANDROID_MOBILE_NATIVE_archive1/generalmobileapp.apk
After the above step...i got SUCCESS message(while running the above step in command prompt ).........
Even after that.... I am getting same error while deploying my app using jdeveloper into android emulator.....
ERROR:
[09:40:02 AM] Failure [INSTALL_FAILED_INSUFFICIENT_STORAGE]
[09:40:02 AM]
[09:40:02 AM] Command-line execution failed (Return code: 0)
[09:40:02 AM] Command-line executed: "E:\android\adt-bundle-windows-x86_64\sdk\platform-tools\adb" -e install -r "C:\JDeveloper\mywork\GeneralMobileApp\deploy\ANDROID_MOBILE_NATIVE_archive1\generalmobileapp.apk"
[09:40:02 AM] Deployment cancelled.
[09:40:02 AM] ---- Deployment incomplete ----.
[09:40:02 AM] Deployment failed due to one or more errors returned by 'E:\android\adt-bundle-windows-x86_64\sdk\platform-tools\adb'. The following is a summary of the returned error(s):
Failure [INSTALL_FAILED_INSUFFICIENT_STORAGE]
Regards,
Nani
Edited by: 962874 on Jan 12, 2013 6:46 AM

The emulator can run out of space for applications - so if you have other applications deployed to the emulator remove them and then try again.
Other options here:
http://stackoverflow.com/questions/2239330/how-to-increase-storage-for-android-emulator-install-failed-insufficient-stora

ASSERTION FAILED error while migrating update rules

Hi all,
We are migrating the 3.x datasource for sd - lo cockpit.
Migration steps are as follows...
1. Make a copy of the infosouce. Activate it.
2. Migrate transfer rules. Activate it.
3. Migrate datasource.
4. Migrate Update rules for the respective info providers.
      But while migrating update rules ASSERTION_FAILED runtime error occurs.
       the assert condition was violated.
       CL_RSTRAN_TEMPLATE========CP or CL_RSTRAN_TEMPLATE======CM003
Please help i tried all the means to rectify but none succeds.
It is occuring for each datasource .
Thanks in advance.
aravind

Hello
Assertion statement is like a conditional break point in ABAP. When you are trying to migrate the update rules,it is failing with Assertion statement it means there is some error with your update rules. Either the mapping is wrong or the the target to which it is mapped is in inactive state. Please check these and retry your migration.
Regards,
Krishna Tangudu

DSO error while creating update rules

Hi All,
i am new to BI 7.0 , while creating update rules for datastore object , i have given the infosource name, and tried to activate it, then i got the error,
ERROR: infoobject 0recordmode is missing from the infosourse
Can any one help, points are assured for the suggestions
Thanks in advance
Peddinti

Hi,
Add 0recordmode info object to your info source and again try to create DTP, 0recordmode is requried in DSO to keep data with history.(like before image,after image,etc), by adding this you dont have any problem, at the time of creating info source itself system will prompt you that this info object is missing do you want to add here say yes.
Regards
Sankar

'L_CHAVL_IN' Error while Activating Update Rules.

Hi All,
 when i am tring to activate my update rules, it is giving error, field "L_CHAVL_IN' in unknown. I dont have that field in my objects.
 i found that field in 'Progarm' for the update rules. that field is used in the exit of one of the feild in the update rules.
 Please give me a solution how to solve this.
Regards,
Ramana.

Check the following SAP Note (# 782858)
Symptom
When you activate the update rules, the system issues a syntax error: 'Syntax error: Field "L_CHAVL_IN" is unknown'.
Other terms
Syntax error; generation; l_chavl_in; update rules
Reason and Prerequisites
This is a program error. The error only occurs under the following circumstances:
You generate an optimized update rule;
An alpha conversion is required.
Solution
BW 3.0B
 Import Support Package 25 for BW 3.0B (BW3.0B Support Package 25 or SAPKW30B25) into your BW system. The Support Package will be available once note 0723254 with the short text, "SAPBWNews BW3.0B Support Package 25", which describes the Support Package in more detail, is released for customers.
BW 3.10 Content
 Import Support Package 19 for BW 3.10 (BW3.10 Support Package 19 or SAPKW31019) into your BW system. The Support Package will be available once note 0723261 with the short text, "SAPBWNews BW 3.1 Content Support Package 19", which describes the Support Package in more detail, is released for customers.
BW 3.50
 Import Support Package 10 for BW 3.5 (BW3.50 Support Package 10 or SAPKW35010) into your BW system. The Support Package will be available oncenote 0763336 with the short text, "SAPBWNews BW Support Package 10 NetWeaver'04 stack 10", which describes the Support Package in more detail, is released for customers.
Assign pts if helpful.

Error while transfering update rules

Hi all,
I am trying to transfer business content for 0SRCT_DS1(Contract Management) from D to Q in BW3.5.
Everything went through except for the update rules.
I checked and rechecked if all the infoobjects are active.
But still am getting the following error:
Start of the after-import method for object type R3TR UPDR (Activation Mode)
Update rules CB1GEUI48SB210JQAYD68E74J read in version M
Error when activating update rule CB1GEUI48SB210JQAYD68E74J
Activation of the update rules for 0SRCT_DS1 2LIS_02_SCL
IC=0SRCT_DS1 IS=2LIS_02_SCL error when checking the update rules
any suggestions?

Hi ,
Just check whether update rules has any routines or fomula, or constant.
If so collect that in a request and transport it.
Assign points if it is helpful.
Thanks
Shanba

Error While manually updating xperia sola to android 4

Similar Messages

Maybe you are looking for