ERROR while MM17 for frecast period change

Hi,
While MM17 i am geting error mesage , we have 220 items for which i want to change the Forecsat period when i excecute MM17 for 115 items i am getting error message as below
Messages have been issued: number MASS000167000001
Message no. MK101
Diagnosis
During inbound processing for the IDoc, messages have arisen while checking material data.
System Response
The system has filed these messages in the form of an application log with the number MASS000167000001.
Procedure
View the application log.
Proceed
i am not able to understand it what error i s this and how to solve it, for 105 items it works properly.
regards,
zafar

Do what you are told to do:
View the application log.
you can either click the Hyperlink PROCEED in the message detail
or
select a message in red in the message overview and click the button Detail.
SAP jumps to the detailed messages and you can obtain the message that caused the update error.

Similar Messages

Error while registering for index relevant events: Invalid RID: No reposito

Hi,
I created an index and assigned a datasource to search the Windows network drive. I activated the index and now when I am monitoring the application log, I see the error Error while registering for index relevant events: Invalid RID: No repository manager found for prefix: and XIndexing documents failed. AbstractTrexIndex: indexing some of the resources failed Continue crawling and Indexing document failed. Access denied for the IndexmanagementService.
When I see the queue status, the queue status is always idle, even after I activate the queue.
In the indexing monitor, I see the error Trex: Preparation failed: index operation
could anyone tell me what could be wrong?
Thanks,

Hi Christian,
thanks for your reply.
we are using 7.2 SP02. Do you think it could be the version that has some issues with custom mapping functions?
regards
Yao

Error while scanning for Serial-ATA devices.

There was an error while scanning for Serial-ATA devices. I'm not sure how to trouble shoot this. I believe a secondary drive in bay 2 died.

I also have just began to hit this issue.
I have 4 2T enterprise class WD drives in a raid 1+0 (or was it 0+1) config.
Device Model: WDC WD2002FYPS-01U1B1
One disk (disk0 in bay 2) keeps disappearing. Completely. /dev/disk0 and /dev/rdisk0 vanish.
If I look at "about this mac" / "More Info" / "Serial-ATA" I get the "error while scanning ...".
If I reboot, the offending disc comes back and the raid volumes start rebuilding.
The SMART status is (reported to be) fine.
I use the 'smartmon' tools and look at the extended SMART status and the values of the counters all looks the same as the other drives. I can run an extended offline test, which takes forever to execute. disk 1 and 3 eventually finish with success (it writes this status into a SMART log area on the disc).
Disk 2 and 0 take longer. I image this is because 2 is being read to resilver 0. Currently, I am running with disk0 absent again, and disk 2s test did not complete. It claims it was aborted by the host, so I imagine the one on disk0 will claim the same after I reboot.
My system is under extended AppleCare until 16 Jan 2011, so if I can determine that this is a disc controller error, I can get it fixed. The drives have a 5 year warrantee, and are less than 1yr old, so they are covered. I just need to figure out what the issue is.
I will now reboot and recover disk0 and see if perhaps there is anything recorded in the SMART log.
There is nothing in kernel.log specific to disk0. I include the log extract here for posterity. The "speed" volume is not raid 0+1, just striped, which is why it gets aborted.
Dec 21 23:30:26 8way kernel[0]: AppleRAID::restartSet - restarting set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D).
Dec 21 23:30:26 8way kernel[0]: AppleRAIDMirrorSet::rebuild complete for set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D).
Dec 22 04:17:22 8way kernel[0]: AppleRAID::restartSet - restarting set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76).
Dec 22 04:17:22 8way kernel[0]: AppleRAIDMirrorSet::rebuild complete for set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76).
Dec 22 05:23:16 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:23:30 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:23:44: --- last message repeated 1 time ---
Dec 22 05:23:44 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:24:14: --- last message repeated 4 times ---
Dec 22 05:24:19 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:24:56: --- last message repeated 2 times ---
Dec 22 05:24:56 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:25:17: --- last message repeated 1 time ---
Dec 22 05:25:17 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:25:31: --- last message repeated 1 time ---
Dec 22 05:25:31 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on EB932B0E-8476-480C-BBD4-53A9A77D9FEF
Dec 22 05:25:45: --- last message repeated 1 time ---
Dec 22 05:25:45 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:26:15: --- last message repeated 2 times ---
Dec 22 05:26:21 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:26:51: --- last message repeated 4 times ---
Dec 22 05:27:12 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:27:33: --- last message repeated 1 time ---
Dec 22 05:27:26 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:27:40: --- last message repeated 1 time ---
Dec 22 05:27:40 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:28:24: --- last message repeated 1 time ---
Dec 22 05:28:24 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:28:39: --- last message repeated 1 time ---
Dec 22 05:28:39 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:29:14 8way kernel[0]: AppleRAID::completeRAIDRequest - error 0xe00002ca detected for set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76), member 3C6E9EA4-831A-4
57A-8CA5-6E7E9CBEED25, set byte offset = 222462894080.
Dec 22 05:29:14 8way kernel[0]: AppleRAID::recover() member 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25 from set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76) has been marked
offline.
Dec 22 05:29:14 8way kernel[0]: AppleRAID::restartSet - restarting set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76).
Dec 22 05:32:38 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:33:22: --- last message repeated 1 time ---
Dec 22 05:33:22 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:34:06: --- last message repeated 1 time ---
Dec 22 05:34:06 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:34:53: --- last message repeated 1 time ---
Dec 22 05:34:53 8way kernel[0]: AppleRAID::completeRAIDRequest - error 0xe00002ca detected for set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D), member 9722C38E-DFF9-4
68F-8DE5-809432493168, set byte offset = 35194773504.
Dec 22 05:34:53 8way kernel[0]: AppleRAID::recover() member 9722C38E-DFF9-468F-8DE5-809432493168 from set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D) has been marked
offline.
Dec 22 05:34:53 8way kernel[0]: AppleRAID::restartSet - restarting set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D).
Dec 22 05:37:24 8way kernel[0]: AppleAHCIDiskQueueManager::setPowerState(0x13d64500, 2 -> 1) timed out after 100113 ms
Dec 22 05:37:44 8way kernel[0]: Failed to issue COM RESET successfully after 3 attempts. Failing...
Dec 22 05:37:44 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002be on EB932B0E-8476-480C-BBD4-53A9A77D9FEF
Dec 22 05:37:44 8way kernel[0]: AppleRAID::recover() member EB932B0E-8476-480C-BBD4-53A9A77D9FEF from set "speed" (190EC75B-C702-4481-ABCF-8C5A0D54BBE0) has been marked
offline.
Dec 22 05:37:44 8way kernel[0]: AppleRAID::restartSet - restarting set "speed" (190EC75B-C702-4481-ABCF-8C5A0D54BBE0).
Dec 22 05:37:44 8way kernel[0]: disk4: media is not present.
Dec 22 05:37:59 8way kernel[0]: speed::terminate(kIOServiceSynchronous) timeout
Dec 22 05:37:59 8way kernel[0]: AppleRAID::completeRAIDRequest - underrun detected, expected = 0xa000, actual = 0x9e00, set = "speed" (190EC75B-C702-4481-ABCF-8C5A0D54BB
E0)
Dec 22 05:37:59 8way kernel[0]: disk4: data underrun.
Dec 22 05:37:59 8way kernel[0]: jnl: disk4: dojnlio: strategy err 0x5
Dec 22 05:37:59 8way kernel[0]: jnl: disk4: end_transaction: only wrote 0 of 40960 bytes to the journal!
Dec 22 05:37:59 8way kernel[0]: disk4: media is not present.
Dec 22 05:38:00 8way kernel[0]: jnl: disk4: close: journal 0x13f34e04, is invalid. aborting outstanding transactions

RMAN-10011: synchronization error while polling for rpc 8, action=startdefa

Could anybody explain what is this error message caused by?
TIA
The entire spool below:
051107064744: NetBackup RMAN Backup Started
ORACLE_SID=db02
backup_type=cold
number_of_channels=2
Started by: Oracle
051107064745: Checking database status
051107064745: Database status: OPEN
051107064745: Getting database password
051107064746: Checking database password
051107064746: Database password: Valid
051107064746: Checking Database mode
051107064746: Database mode: NOARCHIVELOG
051107064746: Shutdown no archive
051107064838: RMAN BACKUP STARTED
Recovery Manager: Release 10.1.0.4.0 - 64bit Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
connected to target database: db02 (DBID=3504436532)
RMAN> connect catalog *
2> run
3> {
4> sql 'alter session set sort_area_size=12582912';
5> sql 'alter session set sort_area_retained_size=1048576';
6> allocate channel t1 type 'SBT_TAPE' parms="ENV=(NB_ORA_POLICY=ORA_solcdi02, NB_ORA_SERV=sun4)"
7> format 'df_%d_%p_%u_%t';
8> set limit channel t1 maxopenfiles=1;
9> allocate channel t2 type 'SBT_TAPE' parms="ENV=(NB_ORA_POLICY=ORA_solcdi02, NB_ORA_SERV=sun4)"
10> format 'df_%d_%p_%u_%t';
11> set limit channel t2 maxopenfiles=1;
12> backup database filesperset=64
13> include current controlfile;
14> sql 'alter database open';
15> release channel t1;
16> release channel t2;
17> }
18>
connected to recovery catalog database
starting full resync of recovery catalog
full resync complete
sql statement: alter session set sort_area_size=12582912
sql statement: alter session set sort_area_retained_size=1048576
allocated channel: t1
channel t1: sid=160 devtype=SBT_TAPE
channel t1: VERITAS NetBackup for Oracle - Release 5.1 (2004122521)
allocated channel: t2
channel t2: sid=159 devtype=SBT_TAPE
channel t2: VERITAS NetBackup for Oracle - Release 5.1 (2004122521)
Starting backup at 11-MAY-07
channel t1: starting full datafile backupset
channel t1: specifying datafile(s) in backupset
input datafile fno=00005 name=/oradata/10gid/u01/grid102/grid102/mgmt.dbf
input datafile fno=00006 name=/oradata/10gid/u01/grid102/grid102/mgmt_ecm_depot1.dbf
input datafile fno=00007 name=/oradata/10gid/u01/grid102/grid102/system02.dbf
input datafile fno=00004 name=/oradata/10grid/u01/grid102/grid102/users01.dbf
channel t1: starting piece 1 at 11-MAY-07
channel t2: starting full datafile backupset
channel t2: specifying datafile(s) in backupset
input datafile fno=00008 name=/oradata/10ggrid/u01/grid102/grid102/mngmecm02.dbf
input datafile fno=00001 name=/oradata/10ggrid/u01/grid102/grid102/system01.dbf
input datafile fno=00002 name=/oradata/10ggrid/u01/grid102/grid102/undotbs01.dbf
input datafile fno=00003 name=/oradata/10ggrid/u01/grid102/grid102/sysaux01.dbf
channel t2: starting piece 1 at 11-MAY-07
channel t2: finished piece 1 at 11-MAY-07
piece handle=df_GRID102_1_19ihecmm_622277334 comment=API Version 2.0,MMS Version 5.0.0.0
channel t2: backup set complete, elapsed time: 00:06:05
channel t2: starting full datafile backupset
channel t2: specifying datafile(s) in backupset
including current controlfile in backupset
channel t2: starting piece 1 at 11-MAY-07
channel t2: finished piece 1 at 11-MAY-07
piece handle=df_GRID102_1_1aihed24_622277700 comment=API Version 2.0,MMS Version 5.0.0.0
channel t2: backup set complete, elapsed time: 00:00:35
channel t1: finished piece 1 at 11-MAY-07
piece handle=df_GRID102_1_18ihecmm_622277334 comment=API Version 2.0,MMS Version 5.0.0.0
channel t1: backup set complete, elapsed time: 00:06:48
Finished backup at 11-MAY-07
Starting Control File and SPFILE Autobackup at 11-MAY-07
piece handle=c-3404436532-20070511-00 comment=API Version 2.0,MMS Version 5.0.0.0
Finished Control File and SPFILE Autobackup at 11-MAY-07
sql statement: alter database open
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-10010: error while checking for RPC completion
RMAN-10011: synchronization error while polling for rpc 8, action=startdefault
Recovery Manager complete.
051107065708: RMAN BACKUP FAILED, RMAN exit status=1
051107065708: Cleaning log file (removing passwords)
051107065709: Error Log Check
051107065837: Rman Stat Generator
051107065956: Backup Html Generator
051107065956: NetBackup RMAN Backup Finished
######################################################

Check on metalink:
RMAN-10011: synchronization error while polling for rpc 3, action=startdefault
Note:429572.1
Werner

Officejet 6700 error while searching for updates: 'Printer could not connect to server'

I recently purchase the Officejet 6700 Premium. While setting the printer up, I received the error 'The printer could not connect to the server.' I first received this while the printer was searching for updates. I later received the same error while trying to set up ePrint from my computer.
The printer is connected through my wireless router. All other print services function normally. It is connected to the network, and I have printed several times over the wireless network.
Though I don't think it matters, since the on-board print set-up gave me the error, I run Windows 7 64-bit on my computer.
Thanks for any help!

What is the IP address of the printer? What is the make and model of the router that you use in the wireless set up? Is the router firmware up to date?
I would first try power cycling the router and the printer. Turn off/unplug the router and then power down the printer. Then plug the router back in and wait for it to be fully up and functioning before turning the printer back on. After you have both pieces of equipment back on and functioning attempt to connect to web services again.
If still having problems I would attempt to set a static DNS on the printer through the embedded web server (EWS) by entering the printer's IP address into the address bar of a browser on a computer.
Once that computer displays that page click on the Network tab.
Then look in the column to the left and find the Wireless section
Click on IPv4
Then on that page look at the 2nd section that is labeled DNS Address configuration
Change the radio button to the manual option
Then for the manual preferred fill it out and make sure it reads 8.8.8.8
Secondary should be set to 8.8.4.4
Then hit Apply
Read the next screen carefully. That message with the "OK" button below it is one that states to click that button to undo the changes you just made. Just navigate away from that page by clicking on another tab.
Then reattempt to connect to web services.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Enter Valid code,Tax Definition [Message 173-36] error while creating new posting period

Hi Experts,
We are not able to create posting period of 2014-15 as we are getting this error.
Enter Valid code,Tax Definition [Message 173-36] error .Please find the enclosed error screen shot for your reference.
Regards
KMJ

Hello KM Jayaprakash
I have the same problem, but i dont see (know) the screen which i can check "Advanced G/L account determination check box". I am in SAP B1 9.0 PL15. Please can you publish a screen shot.
it's urgent please.
Thanks

App Store error while checking for updates

I noticed recently that there hasn't been any updates for OS X Mavericks so I decided to manually check for one. When I did so, I got this error while attempting to check for an update:
There's not much else to explain. The only other thing that has been getting really weird on my computer recently is my keychain. It keeps forgeting the wifi password for my house saying "Keychain 'System' could not be found to store B7F3D". It also keeps forgeting my icloud email password. Other than that, there is nothing else wrong.
Thanks for any help!
-Mpconnel

It seems it fixed on its own. Everything is working properly now.

Error While connecting for ABAP Proxy

Hi All,
i am getting the connection error while creating the proxy connection from PI server to R3 System . I have checked the SLD configuration but did not find any wrong parameters there.
I am getting the below error.
"Error while reading ID of own business system from the SLD for system UDX and client 200", Also the software component of PI box is not getting reflected in SPROXY transaction of R3 system

Hi,
Do you see RFC created for /rep of desired PI system?This could be potential issue in your case:
Please check this:
In order to connect to an ESR, you have to maintain the RFC destination "SAP_PROXY_ESR". This RFC destination will then be used by proxy generation / Transaction SPROXY. It has to be set up using transaction SM59 and should look like this:
RFC Destination: SAP_PROXY_ESR
Connection Type: G (HTTP Connection to External Serv)
Description1: ESR for Proxy Generation
Target Host: esr_host
Service No: 1080
Path Prefix: /rep
Logon and Security:
Basic Authentication: active
User: esr_user
Password: esr_password
Regards,
Ashutosh

Error while searching for Business Partner in Web UI

Hi,
While searching for the Business Partner in Web UI either by First Name, last name or Account ID, we are getting following error:
Cannot display view BSPWD_BASICS/ErrorView2 of Component CRM_UI_Frame
An exception has occured
Exception class: CX_BOL_EXCEPTION - Access previously deleted Entity
Method: CL_CRM_BOL_ENTITY=>GET_ROOT
Source Text Row: 12
When the business partner blind search is given (i.e. by entering *), all the business partners get displayed without any problem.
Also, this problem occurs only for some business partners and NOT ALL.
This problem, has also been observed sometimes when an IBase entry is created in the background.
We are not quite sure whether notes, 135814 & 1515327 will help us in this regard, as the root cause is still unknown.
Could anyone suggest possible causes and solution for the same. We are on CRM 7, using the standard business role.
Thank you in advance.
Regards,
Chhaya

Hi Shiromani,
We have observed that this problem is peculiar with the data records attached to IBase ONLY. It means, if we process them further e.g. create a contract for the Business Partner after attaching the IBase, this problem doesnt occur. Then we are able to search the BP without any error.
In short, when an IBase is created for a BP, and if a search is given for such BP, the error given in the first thread occurs, But when an IBase is created and immediately after that a contract is attached to the BP, and if a search is given for such BP, then there is no error.
We are still further investigating the root cause. But any suggestion/inputs are welcome.
Thank you.
Regards,
Chhaya

'Data Access Error' while trying to delete period using Table Editor in FDM

Hi,
I'm trying to delete a period that has been entered wrongly using Tools->Table Editor option.
But when I try to 'Update Grid' after deleting the Period,I get 'Data Access Error'.
Could any one let me know how to solve the error.
Thanks in advance

Hi Kelly,
There is no data that is entered in that period.The data will be entered for that period next month.
POV is also not set to that period,but still the problem persists.
Thanks

Errors while trying for goods receipt of orders saved

Dear members,
While clicking the goods receipt of the material I got the following two errors while trying it for different materials in two different situations:
1. No SLED processing for material . Data entered is can cancelled. What does this mean?
2. I am getting Mat. is a miss. Part MRP controller INTERTHAL will be notified. how do I handle this error.
Regards,
Sandhya

1) you have to enter Self life expiraiton date or produciton date.
2) Go to CO24 and check the missing part for this material and resolved that than do GR.

Time Out Error while waiting for response from DB Procedure

Hi Gurus,
We are encountering a problem in our production environment. The system is implemented using AIA foundation pack 2.5 on SOA suite 10.1.3.4.
We have a BPEL process A which calls an ESB Service which inturn calls BPEL Process B. In process B, we have a DB procedure call which waits for a response from
a DB procedure. The procedure doesn't reply on time and Process B remains in waiting state to get the response from DB Procedure wherein Process A errors out by showing as "Timed Out Error".
This issue is intermittent and we have already increased transaction-time outs in transaction-manager.xml to 7200 and ejb-orion-jar.xml to 3600.
When we encountered this problem, we found out that there are too many connections open and when we bounced the server, everything was restored to nornal but as it is a production env. we can't do it over and over again.
We have 2 nodes each having max connections as 100 and min. as 0.
Is there a limit to max no. of connections or can we do something in DB side to ensure that it doesn't happen again ?
Please suggest.
Thanks,
Vikas Manchanda

Hi Anuj,
I don't think it is a problem with connection reaching to max numbers because this issue is coming on very intermittent basis.we don't have any other processes using
the same connection pool and this issue is coming even when there is no load on the server. This is recent trace from the production environment. Also i don't have any thing called "abandoned-connection-pool" in my data-sources.xml.
<2011-07-07 13:09:16,101> <ERROR> <default.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "delivery": Waiting for response has timed out. The conversation id is null. Please check the process instance for detail.
com.oracle.bpel.client.delivery.ReceiveTimeOutException: Waiting for response has timed out. The conversation id is null. Please check the process instance for detail.
at com.collaxa.cube.ejb.impl.DeliveryBean.request(DeliveryBean.java:109)
at sun.reflect.GeneratedMethodAccessor113.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:592)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:693)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at DeliveryBean_RemoteProxy_4bin6i8.request(Unknown Source)
at com.collaxa.cube.ws.soap.oc4j.SOAPRequestProvider.processNormalOperation(SOAPRequestProvider.java:451)
at com.collaxa.cube.ws.soap.oc4j.SOAPRequestProvider.processBPELMessage(SOAPRequestProvider.java:274)
at com.collaxa.cube.ws.soap.oc4j.SOAPRequestProvider.processMessage(SOAPRequestProvider.java:120)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:956)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:466)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:96)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:194)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Caused by: com.oracle.bpel.client.delivery.ReceiveTimeOutException: Waiting for response has timed out. The conversation id is null. Please check the process instance for detail.
at com.collaxa.cube.engine.delivery.DeliveryHandler.initialRequestAnyType(DeliveryHandler.java:576)
at com.collaxa.cube.engine.delivery.DeliveryHandler.initialRequest(DeliveryHandler.java:465)
at com.collaxa.cube.engine.delivery.DeliveryHandler.request(DeliveryHandler.java:134)
at com.collaxa.cube.ejb.impl.DeliveryBean.request(DeliveryBean.java)
Please suggest.
Thanks,
Vikas Manchanda

Getting error while trying for software update although ios 7.1.1 version is released

Getting error while I am trying to search the ios 7.1.1 update

Hey there YashasManju,
It sounds like you are unable to update to iOS 7.1.1 due to an error message. I would start with the troubleshooting from the following article to help resolve the issue:
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
If you are getting a specific error message, you may be able to find it in the following article and troubleshoot accordingly:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Thank you for using Apple Support Communities.
Cheers,
Sterling

Getting Error While Going For Print Preview in ALV Report

Hi,
We doveloped a new report based on client requirment while going for print preview all the fields are shufling.Can you please guide me I am unable to solve this problem.
Regards
Suresh

Do you use a field for coloring a column or cell?
If the coding is not too large it could be helpfull to post the coding as well.
Regards,
John.

Error while connecting for Java to SAP

Hi All,
I am encountering the following error while connecting from Java to SAP through JCO:
RFC_ERROR_LOGON_FAILURE: You are not authorized to logon to the target system
I have checked the connection string and everything appears to be fine.
Please let me know what the problem is.
Regards,
Rupesh.

Hi rupesh,
See this thread:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f3f93ee7-0c01-0010-2593-d7c28b5377c2
Regards, Suresh KB

ERROR while MM17 for frecast period change

Similar Messages

Maybe you are looking for