Error while modifying std. FM

Hi,
I want to do some modification in the std. FM but I am geting the error mesage,
Carry out modification comparison for FUNC ISM6_CREATE_SD_ORDER_AND_ITEM first. No changes possible
Message no. EU526
Diagnosis
You are trying to edit an SAP object that has already been changed or enhanced in the current system. This could be
A change (without Modification Assistant)
A modification (with Modification Assistant)
Through an upgrade or the import of a Support Package, an object version that was changed by SAP has been imported. The new SAP version, however, has not yet been compared with the changed version.
System Response
The system will deny access in change mode or enhancement mode until the objects have been compared.
Procedure
Run the modification comparison (SPAU) for the object.
If the object is supported by the Modification Assistant, you can compare/adjust it by clicking the stoplight.
If the object was not changed using the Modification Assistant, but by inclusion of notes using the Note Assistant, the respective notes must be compared/adjusted. If it is not absolutely clear which note caused the object to be changed, you can use the Modification Browser SE95 to perform a search: Expand the subtree "Note Corrections" and then use the search function to search for the object name.
Then i try thorugh SPAU and SE95 in SE95 when I click on modification adjusment it system open the transaction SPAU agin , but in SPAU how to adjust it or How system will allow to do the modifcation
regards,
zafar

Hi,
I guess the object that you are trying to edit is currently locked by an OSS note. You need to check the tcode se95. Press F8 and in the subsequent screen expand all nodes. Now search for the object, it should be under an OSS note, Right Click on the note number and choose 'reset to original ' . This should hopefully solve your issue.
Regards,
Kiran

Similar Messages

Update Termination Error while modifying PO in ME22n

Hi All,
I am facing one problem,while modifying the PO using ME22n.After modifying the PO when I save it ,Express Document "update was terminated" error comes.
Can anybody please guide me on this, why it is happening .It's very urgent.
Thanks in advance.

Hi
Check the following link:
http://www.sapfans.com/forums/viewtopic.php?p=822485&sid=253f8b02796c0b390a5180b3d1a86661
Though not relevant for PO......the basics are same.
Regards
Aravind
Assign points if useful

Error while copying Std determinatino rule in CRM

Hi,
I get the following error while trying to copy the existing determination rule. Could you analyse this please.
ERROR MSG:
Prefix number: entry missing for system CRD client XXX
Message no. 5W023
Diagnosis
Tasks, rules, and workflow definitions require an ID that is unique throughout all systems and clients. In this way, you can ensure that you can transport these objects from one system into another at any time (without restrictions). From a technical point of view, the uniqueness of the ID is ensured by what is known as a "prefix number". You can define a separate prefix number for every system and every client in table T78NR.
System Response
If a prefix number is not defined in the client in which you are currently working, it is not possible to maintain (maintenance terminates).
Procedure
Maintain table T78NR in Customizing, and create an entry for the system in question and the current client.
Many thanks
Guest01

Its been answered

Error while doing Std.cost estimation.

Hallo gurus,
I am facing one problem while doing Std.Cost estimation.
Let me explain in detailed..
I am doing costing estimation for a Product. This product contains both Bought out Material and Customer Supplied Products.But both are coming as Material class as Raw material.
But Overheads to be calculated differently for those means for Bought out product - 1.5% and for Customer supplied Products-5%.
So i have created one Overhead Key and the same is attached to Overhead
Group and this overhead group is attached to a respective material.
In Costing sheet for overhead i have selected Dependency D010 and maintained the same along with Overhead key..
But while executing CK11N, system is not calculating the same.
Pls through some light on this....
Advance Thanks..
Regds,
Janardhan.

Did you attached the costing sheet in costing variant?

Error while modifying logon page

Hi All,
I am trying to modify the text present on the log on page. For this I modifying the par file com.sap.portal.runtime.logon.par.bak. After deploying the par file and changing the authschemes.xml file, I get the following error when I open my portal:
<b>Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
The exception was logged. Inform your system administrator..
See the details for the exception ID in the log file</b>
When I go ahead and see the log file, I get the following error:
<b>An error occured during authscheme computation.
[EXCEPTION]
com.sapportals.portal.prt.component.PortalComponentException: Error in init method
Component : com.igt.logon.certlogon
            at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:251)
            at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:267)
            at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:312)
            at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:385)
            at com.sapportals.portal.prt.service.authenticationservice.AuthenticationService.getLogonIView(AuthenticationService.java:235)
            at com.sapportals.portal.prt.service.hook.SecurityHookService.doNodeHook(SecurityHookService.java:154)</b>
I looked at my authschemes file many times, but it looks good to me. Any idea where I am going wrong. Any help would be appreciated.
Thanks,
Tom

Hi Tom,
Try once again with following steps
- J2ee - cluster - server0 - apps - sap.com - irj - servlet_jsp - irj - root - web-inf - deployment - PCD -
Com.sap.portal.runtime.logon.par.bak
- copy, paste and rename par file at desktop
- Then extract preserving folder structure
- Portal-inf - lib - copy .jar files to your project
For Changing images :-
- Portal-inf
- Meta-inf - information
- CSS       - style sheets
- SRM
- Layout   - copy or replace your images here
- Umelogontoparea.txt and umelogonbotarea.txt will be same in every JSP pages.
   Look only these two files.
- Then portal - System admin - support - portal Runtime - admin console - upload that .par file from desktop. ( No need to ZIP again )
- .par   NOT   .par.bak
- Then shutdown servlet engine.
- User - SAP - APD - JC00 - J2ee - Configtool -
Configuration tool - Switch to configuration - Edit Mode
- Cluster-data - Server - Persistence -   Com.sap.security.core.umeservice - Then switch to edit mode - Authscheme.xml
Replace all occurances of string com.sap.portal.runtime.logon with your par file in the tag <frontendtarget> save and restart servlet engine.
I hope u will solve your problem
If helpful, don't forget to reward points
Reegards,
Nisarg

Error while modifying the data in Emergency Contact.

Hi All,
I have developed a new application for emergency contact by following the FPM.Its a Zcopy of standard US/family application. The application is working fine except modify details.If i am trying to modify the previous records i am getting an error Start date should not be earlier than todays date We are using Usecase B3
Can any one help me on this.
Thanks
Ravi Sunkara

Hi,
Check have you implement ny BADI..............
Any logic you have written in FPM for thiss.......

Error while modifying Control Tables in FDM with Essbase Adapters

Hi,
While trying to edit Control Tables for Period / Category, we are getting an Error 'Unable to retrieve Target System'. We have installed FDM with the Essbase Target Adapter from ES11x-G4-D_1002.zip
Any help will be greatly appreciated
Thanks,
Prasad

Hi,
Thanks for the quick response.
We are now able to edit the Control Tables by converting the Dimensions to Global mode
However, while trying to export, we are getting the following error:
Error(1012004) Invalid member name
Thanks & Regards,
Prasad

DI Server: -5002 error while modifying Order lines

When modifying orderlines via the DI Server, I suddenly start getting this error message:
-5002
There is a difference between the document total and its components. [ORDR.DocTotal][line: 0]
It occurs when trying to modify the price pr line, eg:
<Document_Lines>
<row>
<ItemCode>100017</ItemCode>
<Quantity>1.0</Quantity>
<Price>2200.0</Price>
</row>
</Document_Lines>
Anyone who has seen this error message before?
Message was edited by:
Trinidad Martinez
Please add your problem subject in the title and not URGENT!

I really really hope that someone can help me with this as soon as possible.
At least I have found a consistent way to produce the error-messages, and a consistent way not to get them, but that is really the strangest part!
If I have a order with eg item code 100017, Quantity 1, and default price 2250,
and I send this xml to the DI server:
<Document_Lines>
<row>
<ItemCode>100017</ItemCode>
<Quantity>3.0</Quantity>
<Price>2100.0</Price>
</row>
</Document_Lines>
I get the error.
However, if I send exactly the same, but with
<Quantity>2.0</Quantity>
I DON'T get the error, and the line is updated accordingly!
Incredible strange!

Error While Modifying the Display Profile

When I am trying to run the dpadmin modify command for adding the Custom JSP channel into JSPTableContainer , I get a error saying
" ERROR : Failed to find channel/container : parent =JSPTableContainer,Channel/container=JSPTableContainer. "

Raj,
What I mean with re-add is that we always add never modify.
Here is a snapshot of a piece of an ANT script which builds the installer. First we clean the portal then we add the providers/channels:
echo Make a clean starting portal. Deletes all channels and providers......
/opt/SUNWps/bin/dpadmin remove -u "uid=amadmin,ou=people,o=uu.nl,o=isp" -w adminadmin -g -t root
/opt/SUNWps/bin/dpadmin remove -u "uid=amadmin,ou=people,o=uu.nl,o=isp" -w adminadmin -d "o=uu.nl,o=isp" -t root
/opt/SUNWps/bin/dpadmin add -u "uid=amadmin,ou=people,o=uu.nl,o=isp" -w adminadmin -g ${xml.temp.dest}/Root/DPServletISPStandaard.xml
/opt/SUNWps/bin/dpadmin add -u "uid=amadmin,ou=people,o=uu.nl,o=isp" -w adminadmin -d "o=uu.nl,o=isp" ${xml.temp.dest}/Root/DPServletAlleenTabbladen.xml
echo Add the linkprovider to the portal......
/opt/SUNWps/bin/dpadmin add -u "uid=amadmin,ou=people,o=uu.nl,o=isp" -w adminadmin -g ${xml.temp.dest}/LinkProvider/LinkProvider.xml
Courtesy of Nathalie Btw
good luck,
Ronald

Getting error while printing std sapscript

Hello All,
Im taking an output of standard document through tcode f.62
this tcode generating one spool request , and m taking the printout through sp01 tcode.
While taking printout printer is printing the page with the below message.
PCL XL error
Subsystems : IMAGE
Error : Internalerror ox18
operator : beginimage
Position : 533
Pls let me knw how to rectify this error, is there any printer related setting which needs to be changes or something?
Regards,
Sunny

thnks

Error while modifying HR infotype PA0105 using HR_INFOTYPE_OPERATION

Hello All,
I am not able to modifying the infotype PA0105.
Currently I am using the FM HR_INFOTYPE_OPERATION.
But I am not able to modify the record.
Has anyone faced any such situation...
Please help..!!
Useful pointers will be appreciated...
Thanks & Regards,
Tarun Gambhir

Hope this helps you out...
      C_INS   LIKE PSPAR-ACTIO VALUE 'INS',
      W_000-PERNR = T_SAIDA-PERNR.
      W_000-INFTY = C_0000.
      W_000-ENDDA = C_DATA.
      W_000-BEGDA = T_PA0000-BEGDA.
      W_000-AEDTM = SY-DATUM.
      W_000-UNAME = SY-UNAME.
      W_000-MASSN = C_16.
      W_000-MASSG = S_MASSG-LOW.
      W_000-STAT1 = SPACE.
      W_000-STAT2 = C_3.
      W_000-STAT3 = C_1.
      W_PSPAR-PERNR = T_SAIDA-PERNR.
      W_PSPAR-INFTY = C_0000.
      W_PSPAR-PLANS = T_P0001-PLANS.
      W_PSPAR-WERKS = T_P0001-WERKS.
      W_PSPAR-PERSG = T_P0001-PERSG.
      W_PSPAR-PERSK = T_P0001-PERSK.
      CALL FUNCTION 'HR_INFOTYPE_OPERATION'
        EXPORTING
          INFTY            = C_0000
          NUMBER           = T_SAIDA-PERNR
          LOCKINDICATOR    = SPACE
          VALIDITYEND      = C_DATA
          VALIDITYBEGIN    = V_BASE
          RECORD           = W_000
          OPERATION        = C_INS
          SECONDARY_RECORD = W_PSPAR
        IMPORTING
          RETURN           = T_RET_FUNC                     "#EC *
          KEY              = T_KEY.                         "#EC *
Greetings,
Blag.

Error while modifying icon and name in the subpalette

Hi.... I have made three subVIs and want to distribute as LabVIEW library.
I made a llb file and added all three sbVIs in that. And put it in user.lib. In all three dll there are Call Library Function means I have one dll. I have put this DLL in the use.lib folder.
Problem:
The icon and name of my application in the LabVIEW "User Libraries" pallete are default. I want it to set automatically set to my desire icon for that subpallete and desire name as well. How can I do that?
I am using LabVIEW 6i. I tried to change the icon and name. And I tried according to following link and in the third step it says
"Right-click an icon in the custom view and remove the checkmark next to Synchronize with Directory in the shortcut menu."
But that option is greyed out, how can I remove checkmark against that.
http://digital.ni.com/public.nsf/3efedde43...enDocument#rank
I also tried to rename readonly.txt file in default folder in menu folder. I tried to add in default folder but it does not sucess. It is always giving error that please check the read only attribute.
One Dll is used in all three subVIs. When I set relative path ".\MY_DLL.dll" in the configuration of Call Library Function then it is chaging it to absolute path automatically.
I want it relative so that when user put my_llb.llb file and my_dll.dll file into user.lib folder then it will automatically take that dll instead of searching for that DLL in the nearest location. What should I do?
Do I require to buy Application Builder for that-specially for setting my own icon & name for "subPallete" of my library.
Thanks in advance......

Hi,
Here are step-by-step instructions on how
to insert a custom sub-palette in the Instrument Drivers or User
Libraries palettes in LabVIEW 6.0 and above.
Save one of the VIs required for the instrument driver as a library (*.llb):
Select File»Save or Save As to display the Name the VI dialog box.
Click the New VI Library button to display the New VI Library dialog box.
Enter the name of the new library and click the VI Library button.
LabVIEW automatically adds a .llb extension to the name of the library.
The Name the VI dialog box reappears. Enter the name of your VI to save it in the new library.
Close LabVIEW.
Browse to the directory where LabVIEW is installed and open the
"instr.lib" folder to insert a new menu into the Instrument Drivers
palette (or the user.lib for the User Libraries palette). Create a new
folder and name it appropriately. Copy the .llb file into that new
folder.
Open LabVIEW and open a new VI. Pin down the
palette by right clicking and clicking on the push-pin on the upper
left hand corner so that the palette is fixed on the screen. Then click
on the Options button on the toolbar at the top.
Select
the "Edit Palettes..." button. Navigate to the Instrument Drivers
palette and right click on the icon with the name of the folder that
you created. Select "Delete Submenu".
Right click on an open area on the palette and select Insert»Submenu.
When prompted, select "Create a new menu file (.mnu)". Save this in the
folder that you created in step __. (Remember to type the .mnu file
extension on your file name) Typically this mnu file is named dir.mnu.
When prompted, enter the name for the submenu, and select ok.
Open the new submenu. Now you can insert VIs (by right clicking in the empty space and going to Insert»VI
and selecting it from the .llb file) or additional submenus as you
desire. When creating new submenus, it is recommended to create a new
.mnu file for each submenu and save it in the folder you created.
Next you can edit the icons for the submenus by right clicking and selecting Edit Submenu Icon.
When you are finished, select "Save Changes" from the "Edit Controls and Palettes" dialog box.
To port the new menu in the Instrument Drivers palette onto another
computer with LabVIEW, just copy the folder (and its contents) that you
created and paste it into the instr.lib folder. When LabVIEW is loaded
it will see the new folder and load the menus.
Note:
If you save the changes and return to add more submenus you may receive
an error instructing you to check the read-only properties. To fix
this, begin the editing process. Then right click on the menu that you
created in the Instrument Drivers palette and select "Synchronize with
Directory" so that the check mark beside it disappears. This will allow
you to save your changes. For more information on this see the related
link below.
I hope this helps,
Regards,
Nadim
Applications Engineering
National Instruments

Error while raising modify request for AD resource

Hi,
Getting below error in log, while raising modify request for AD resource, UI shows error while retrieving resource entity details.
<Oct 19, 2011 2:15:45 AM CDT> <Error> <oracle.iam.requesttemplate.agentry.operations> <BEA-000000> <The "itresource-type" property is missing for attribute reference AD Remote Manager ITResource, which is of type itresource-lookup.>
I verified the datasets for AD Remote Manager ITResource, comparing with our other environments. It is proper and we are not using AD Remote Manager ITResource anywhere.
<AttributeReference name="AD Remote Manager ITResource" attr-ref="AD Remote Manager ITResource" type="Long" length="10" widget="itresource-lookup" required="false" available-in-bulk="true"/>
Please let me know how to resolve this issue.
Thanks in Advance.
Edited by: 856226 on Oct 19, 2011 4:55 AM

Hi,
I think you should post this in an other forum, somewher in the Fusion stack, maybe Identy Management. This forums is ment for the Oracle database. So please post in a forum underneath https://forums.oracle.com/forums/category.jspa?categoryID=13&start=0
Herald ten Dam
http://htendam.wordpress.com

Getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit

Hi,
I am getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit. I have already tried all option but fail to installation
an error during the installation of assembly micro soft.vc80.crt

Hi,
I am getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit. I have already tried all option but fail to installation
an error during the installation of assembly micro soft.vc80.crt
Can you please post summary.txt file here.Below link will help you in finding it.
http://technet.microsoft.com/en-us/library/ms143702(v=sql.105).aspx
Also with error you posted I guess it is a known issue .You need to install below package and then continue with fresh installation
http://www.microsoft.com/en-gb/download/details.aspx?id=15336
Please make sure before beginning fresh installation you make sure previous failed installation is removed completely.Use add remove program to remove failed SQL Server.If yu still face issue please post summary.txt file here
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Getting error while tring to Check in any document in Sharepoint 2007. Error - "Unable to validate data. System.Web.Configuration.MachineKey.GetDecodedData(Byte[] buf, Byte[] modifier, Int32 start, Int32 length, Int32& dataLength) ...

Hi Team,
I am getting error while tring to Check in any document in Sharepoint 2007. Error - "Unable to validate data. System.Web.Configuration.MachineKey.GetDecodedData(Byte[] buf, Byte[] modifier, Int32 start, Int32 length, Int32& dataLength).
Anybody please let me know how to resolve the issue. It has affected our 9 site collection with almost 2000+ sites. Please email me your your suggestion or you can share your ideas here also.
Tried to reset the IIS, checked the Internet connection speed (8MBps). Cleared the cache and all but no luck.
Thanks,
Pronob

Hello,
I have found this support window for you:
http://support.microsoft.com/kb/556031
http://technet.microsoft.com/en-in/library/cc298582%28v=office.12%29.aspx
This may help you
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Error while modifying std. FM

Similar Messages

Maybe you are looking for