Error while opening Adobe Form Builder

Hi all,
I am trying to open an existing form in Adobe Form builder (TA SFP).
When ever I display a standard form say FP_TEST_01 and go to the layout tab, I get an error saying Error occurred in communication with layout editor. I am using ECC 5.0 system.
Am I missing any configurations?
We have all the required configurations set as mentioned in Configuration guide. (Required for ABAP stack).
Please help me out.
Thanks in advance.
Regards,
Ravikiran.

Or go to http://service.sap.com/download > Download > SPs and Patches > Search for SPs and Patches > Enter 'Designer'. Install Designer 7.0 and the 7.0 patch (!).
Kind regards,
Markus Meisl
SAP NetWeaver Product Management

Similar Messages

"Access Denied" pop up error while opening adobe online form in IE8.

"Access Denied" pop up error while opening adobe online form in IE8. I use crosslink to connect to client network and then open IE with App Tunnel. Tried to re-install Acrobat reader multiple times but issue still persist. Even tried to change the PDF properties (Edit-> Preference- General/Internet/Security Enhanced)

Hello Adobe technical Team,
I am struggling to fix the issue. Tried a lot of combinations to manipulate PDF preference, browser setting but failed to fix the issue. Can someone please look into the details and advise? Thanks in advance for any help.input.

Facing Problem While Opening the Form Builder 10g

Hi Experts,
I am Facing below Error while opening one of the developed forms in the form builder 10g. Operating system of my laptop is Window 7.
Oracle Forms Designer Has stopped Working
Windows can check online for a solution to the problem.
---> Check online for a solution and close the program
----> close the program
Please provide any tips or solutions to resolve above Error.
Thanks in advance

Meher Irk wrote:
Hi Experts,
I am Facing below Error while opening one of the developed forms in the form builder 10g. Operating system of my laptop is Window 7.
Oracle Forms Designer Has stopped Working
Windows can check online for a solution to the problem.
---> Check online for a solution and close the program
----> close the program
Try this..
Open form builder.
Make connection with database.
Now open the form.
Hope this works..

Error while opening EBS Forms....

I am getting error while opening EBS 12.0.6 forms.The error we are getting is:
FRM-92150 Web client version too new
How to fix this issue??
Regards,
Rupdipt

Hi,
Did you try the suggested solution in the document referenced above and see if it helps?
Can you find any errors in the database log file?
If none of the above helps, please enable FRD and post the complete error message here (Note: 438652.1 - R12: Forms Runtime Diagnostics (FRD), Tracing And Logging For Forms In Oracle Applications).
Regards,
Hussein

IE error while submitting Adobe Form

Hi All,
I am facing an unusual problem while submitting Adobe form. When I try to submit Adobe form a dialog box will appear, which shows some missing dll information.
"sapadobecontrol.dll" and force me to close that dialog box which ultimately leads to closing the application.
Till now I have done several things like
1. Repair/upgrade the IE.
2. Modify/ repair Adobe Life Cycle Designer.
I am using Portal Sneak Preview 7.0
Please give your valuable views.
Regards,

I too am having the same issue. My process is also very simple, and I can't seem to find where I could have made a mistake.
I googled the error and found only one or two possible solutions that involved changing my data source. I don't think that is exactly the solution to either of our problems. It seems a bit complex for such simple workflows.

Error while opening Adobe Reader

Hi Everyone,
I'm currently encountering an error with adobe reader 8.1 and 9.0(I've tried both) while opening an interactive form in WDA and ISR. Input fields are also disabled. I have found the thread below
ADS Credential Rights Issue. All reports checks successful...
Adobe Interactive Form Not Editable
Re: "UsageRights issue"
Re: "UsageRights issue"
however, they do not explain how they fixed the problem.
Does anyone have an idea of the problem here? Is this an ADS credential issue? a reader rights issue?
I am running on ECC6 with the following patches:
SAP_ABA     700     0015     SAPKA70015     Cross-Application Component
SAP_BASIS     700     0015     SAPKB70015     SAP Basis Component
ST-PI     2005_1_700     0006     SAPKITLQI6     SAP Solution Tools Plug-In
PI_BASIS     2005_1_700     0015     SAPKIPYJ7F     PI_BASIS 2005_1_700
SAP_BW     700     0017     SAPKW70017     SAP NetWeaver BI 7.0
SAP_AP     700     0012     SAPKNA7012     SAP Application Platform
SAP_HR     600     0029     SAPKE60029     Human Resources
SAP_APPL     600     0013     SAPKH60013     Logistics and Accounting
I am also using Adobe LiveCycle 7.1.
Your help will be greatly appreciated.
Thanks!
Edited by: Alexander Benavidez on Jun 25, 2009 10:29 AM
Edited by: Alexander Benavidez on Jun 25, 2009 10:31 AM

Hi Alex,
You will add some piece of code in init method in WDA,
data: lr_zsample type ref to cl_wd_interactive_form,
      lr_method_handler type ref to if_wd_iactive_form_method_hndl.
      check first_time = abap_true.
      lr_zsample ?= view->get_element( 'FORM' ).
      lr_method_handler ?= lr_zsample->_method_handler.
      lr_method_handler->set_legacy_editing_enabled( abap_true ).
You will get the editable mode of Interactive form.
By
Parthi

TNS Listener error while opening a Form !

Hi all,
I have installed Form/Reports 11gr2 with Weblogic 10.3.6 64-bit & database 11gr2.
All installations and configures are successful.
But when I give URL address (servername:portno/forms/frmservlet?form=main) to open a form, it gives me following error;
ora-12514: TNS:listener does not currently know of service requested in connect descriptor.
I searched on google, but didn't clear my error. I also checked Oracle services, all are started.
So please guide me !
Thanks/Regards.
Dass

I never changed settings in tnsnames.ora, it is always as per default settings. If required now then let me know.
Please note that when I connect my form builder with databases, it is connected. But when I run my form it again show same error and open a dialog box for
username,password & databases connection string.
I copied this file into "E:\Oracle\Middleware\asinst_1\config" of form.
Below is my tnsnames.ora file;
# tnsnames.ora Network Configuration File: E:\app\admin\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
ORCL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = orcl)
Thanks.

TNS error while opening the form in IE 6

Friends,
DB OS: RHEL AS 3 (oracle 9iR2)
OAS OS: RHEL AS 4
Client OS: windows xp sp2
when i try to open the form from windows xp......
it ask me the username/password/database
when i enter....
username: system
password: oradba
database: orcl
its connecting no problem.....but the db connecting is Oracle application Server's 10g db.
but i want to connect the 9i DB
when i give the username/password/database for 9i db like....
username: scott
password: tiger
database: test
its giving me the below error.....
ORA-12514: TNS could not resolve the connect identifier specifiedIn the OAS /u01/app/oracle/product/10.1.2/infrahome/network/admin/tnsnames.ora contains...
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/10.1.2/infrahome/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = appsworld.ncc.com)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = orcl.ncc.com)
test =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.7.2)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = ncc)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = appsworld.ncc.com)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = PLSExtProc)
)Am i have to add any other entry in listener.ora?
please point me where im making mistake.
thanks

Actually....iam opening the form from windows xp.Means what? Are u opening in the browser or in the Forms Builder?
----in the browser
when i create a new form in windows xp using developer suite (i have installed developer suite) i am able to connect the database. i checked the tnsping in server its working.....
This means developer suite has been configured for database.---i configured the developer suite(172.16.7.123) to 9idb(172.16.7.2)
but i am not able to open the form.What error are u getting when u open the form?
---when i open the form in the browser (http://appsworld.ncc.com:7778/forms/frmservlet?config=test)
its asking me the username,password,database.
i gave username=ncc password=nccpwd database=test
In the db server's tnsnames.ora...i have given the db details under test.
if i do "tnsping test" the result is ok. but when i open the form in the browser im getting the ora-12514 error after giving the above said details of username.
But....when i give the username,password and database of infrastructure i.e.,
username=system password=oradba database=orcl then the form is opening in the browser.

Error while opening PO forms

Hi experts,
While opening forms in purchasing super user responsibility,
the following error is coming.
APP-PO-14142: get_po_parameters-10: ORA-01403: exact fetch returns more than requested no.of rows
Please give any suggestion to overcome this issue..
Thanks
Durga
Edited by: 805567 on Sep 24, 2012 6:15 PM

Hi
Now problem is solved.
One of my colleagues did this..
Just he delete the rows in po_document_types view..
Now forms are opening without any error..still I am not able to understand how the data is coming into this view.
How the error resolved by deleting rows in this view..
Thanks for your support
Durga
Edited by: 805567 on Sep 26, 2012 11:23 AM

Getting Error while generate Adobe form

Hi,
I am new to adobe smartforms, i am getting one error while activate smartform. we need to set anything in SICF setting for Adobe smartform??. i am get error like "this forms refers to external file which is not found in compters.please create connection to folder so thatt these should be found.

Hi
Are you talking about adobe forms or smartforms. These are 2 different types of forms. For Adobe forms you need an ADS which sits on the java stack and needs to be configured properly. Some services need to be activated in SICF for the configuration as well. A conplete guide on how to configure the ADS is found on the following link
[https://www.sdn.sap.com/irj/sdn/adobe?rid=/webcontent/uuid/90355269-4d89-2a10-0bb9-f388704f1dcd]
Regards
Thashin

Error while opening a form after R12 install

Hi,
I have installed EBS R12.0.4 on linux. The install is successful and i am able to login. But when I am trying to open a forms session I am getting an error "Unknown plugin (application/x-java-applet;jpi-version=1.5.0_13)". I am using Mozilla Firefox 3 beat 5. The browser is unable to find the java plugin required to open a forms based session.
Can anyone let me know the reason & provide the steps to install the required plugin?
Thanks,
Amit

Hi Amit,
You need to have a valid entry in the hosts file (under %Windows%\system32\drivers\etc directory) as follows:
<IP Address> <hostname.domainname>
IP Address: is the IP Address of the machine where Oracle Apps is installed
hostname.domainname: is the hostname and the domaninname where Oracle Apps is installed
From IE, add the application URL to the trusted sites list and access the login page from the following URL:
http://<hostname>.<domainname>:<port>/OA_HTML/AppsLogin
To access the application from Firefox, install the missing plugin from the following URL, then you should be able to access the application using the URL posted above.
http://<hostname>:<port>/OA_HTML/oaj2se.exe
If you have Metalink access, please refer to the note referenced in my previous reply for more details.
Regards,
Hussein

Error while executing adobe form

Hi All,
I am working on an adobe form in development system everything is working perfectly, But the form is giving an exception ()when executed in quality system .I did remote comparison of both layout and interface and there are no changes.
What i observed is when i execute the form in SFP in dev system it is creating an FM , But in quality system execution of form in SFP is giving me error saying "Error in include information for function module /1BCDW/0000000007" and when i try to check this FM in SE37 it says it does not exist.
Please let me know if anyone has faced similar issue before and if you have found the solution.
Regards,
Anjana Rao

Hi friend,
Its simple.
The same problem exists in Smart forms also.
What you need to do is you need to give the Adobe form name to the function module "FP_FUNCTION_MODULE_NAME".
It will return you a name just you need to substitute that in the form call.
Because for each and every system the function module number generated for the Adobe form differs.
Just see the link below its for smart form, just adapt the same for Adobe forms, see my post and use the above function module instead of the one in the link [Smartform error|http://forums.sdn.sap.com/thread.jspa?threadID=2127306&messageID=11037853#11037853]
Do this it will solve your problem.
If any queries please revert back to me i will help you.
Thanks,
Sri Hari
Edited by: srihari.kumar on Feb 13, 2012 3:52 PM

Error while opening Oracle Form

Dear All,
Presently I am using Oracle R12.1.1 on Windows XP SP2 - Operating System. Now when I am opening any form within any application within Oracle I am getting the below error.
FRM -92050: Failed to connect to the Server: /forms/lservlet:-1
Kindly help me in solving this issue.
Regards
Hitesh Parsawala

Hitesh,
I see this error in the log ..
=============================================
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
=============================================
Please verify that you have proper entry in the hosts file and that your listener is up and running. Also, please verify that the database is open and no errors can be found in the database log file.
TroubleShooting Guide For ORA-12514 TNS:listener could not resolve SERVICE_NAME given in connect descriptor [ID 444705.1]
Thanks,
Hussein

Error while executing Adobe forms

Hi all,
I need a small help regarding SAP Adobe Forms.
I have created one adobe form but when i activate it, i get the following error:
SOAP Framework Error: SOAP Runtime Exception: CSoapExceptionTransport: HTTP send failed with exception communication_failure(100.101).
I am running in SAP IDES system client 800.
Also i searches to fix this error by searching on Google and i found some of the posts related to this error on SDN but i could not understand that properly.
So its my request if you could please guide me in solving this error, it would be a great help for me.
Waiting for your answers.
Hoping to get positive feedback...
Best Regards,
Mayur.

Hi Liz,
Thanks for replying back to my problem soon. Actually i am running this form in IDES system client 800 and it is my university IDES system that i am practicing adobe forms. If i contact the basis person, he wont allow to download the patch for a single student like me.
Can you please provide me the link from where i can download this patch from.....
I do have a SAP service marketplace ID and password which is my university's login but i can login as a student there. So if you please provide me the link to download tht patch it will be very generous and helpful...
Waiting for your answer soon Liz.......
Best Regards,
Mayur.....

Error while accesing ADOBE Form in SFP over Citrix

Hi,
When I try to access the ADOBE Form from transaction code SFP over Citrix from home, I am getting the follwoing message and not allowing me to either display or change the ADOBE form.
"Could not start Layout Designer"
When I try to access the same ADOBE Form in my office, everything works fine.
I have installed Adobe LiveCycle Designer 8.1 on my home system. Still I am getting the message that the Layout Designer could not be started.
What could be the issue ?
Kindly suggest, how can I overcome this issue.
Thanks in advance.

Hi ,
Need to install Adobe Designer 8.1 in your Citrix server along with the SAP Logon Pad.
Thanks
Srikanth

Error while opening Adobe Form Builder

Similar Messages

Maybe you are looking for