Error while opening light room 5.4

Light room encountered an error when reading from its preview cache and needs to quit. in light room 5.4. i didn't fine catalog in light room folder

Did you mean, "Lightroom encountered and error when reading from its preview cache and needs to quit?"
https://forums.adobe.com/message/6333848
I've been using LR since 1.0 and never encountered this issue until today. The above procedure for creating a new Preview Cache folder and preview files should fix the issue.

Similar Messages

  • Error while Opening PDF attachment from Mail

    Hi,
    We two Output Types created ZNEU and ZAUF. Two Smartforms are created for the same Output Types. The Issue now is, When ZNEU triggers and send a mail the document is properly decoded and gets opened but for ZAUF it doesn't. It says File damaged.
    This is the code we have used for sending mail.
    CONSTANTS:
              co_pdf(3) TYPE c VALUE 'PDF',
              co_raw(3) TYPE c VALUE 'RAW'.
      DATA:
            it_objbin TYPE STANDARD TABLE OF solisti1,
            wa_objbin TYPE solisti1.
      DATA:
             lv_filesize TYPE i.
      DATA:
            it_lines TYPE STANDARD TABLE OF tline.
      DATA:
            wa_mail_body TYPE solisti1,
            wa_receipients TYPE somlreci1.
      DATA:
           document           TYPE REF TO cl_document_bcs,
           content            TYPE solix_tab,
           wa_content         TYPE solix,
           send_request       TYPE REF TO cl_bcs,
           sender             TYPE REF TO if_sender_bcs,
           recipient          TYPE REF TO if_recipient_bcs,
           requested_status   TYPE REF TO bcs_rqst,
           status_mail        TYPE bcs_stml,
           bcs_exception      TYPE REF TO cx_bcs,
           lv_rec             TYPE adr6-smtp_addr.
      DATA:
             wa_attachx TYPE solix,
             l_pdf_len TYPE i,
             l_con_len TYPE i,
             l_pdf_pos TYPE i,
             l_con_pos TYPE i.
      FIELD-SYMBOLS: <fs_con> TYPE x.
      CLASS cl_cam_address_bcs     DEFINITION LOAD.
      CLASS cl_abap_char_utilities DEFINITION LOAD.
    * Get the PDF version of the OTF
      CALL FUNCTION 'CONVERT_OTF'
       EXPORTING
         format                      = 'PDF'
       IMPORTING
         bin_filesize                = lv_filesize
        TABLES
          otf                         = job_output_info-otfdata
          lines                       = it_lines
       EXCEPTIONS
         err_max_linewidth           = 1
         err_format                  = 2
         err_conv_not_possible       = 3
         err_bad_otf                 = 4
         OTHERS                      = 5.
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    * Convert the PDF format to the table type required for the attachment.
      CALL FUNCTION 'QCE1_CONVERT'
        TABLES
          t_source_tab         = it_lines
          t_target_tab         = it_objbin
        EXCEPTIONS
          convert_not_possible = 1
          OTHERS               = 2.
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    * Convert the data which is in text to binary
      l_con_pos = 0.
      DESCRIBE FIELD wa_objbin LENGTH l_pdf_len IN BYTE MODE.
      DESCRIBE FIELD wa_attachx LENGTH l_con_len IN BYTE MODE.
      LOOP AT it_objbin INTO wa_objbin.
        ASSIGN wa_objbin TO <fs_con> CASTING.
        CHECK sy-subrc EQ 0.
        DO l_pdf_len TIMES.
          l_pdf_pos = sy-index - 1.
          IF l_con_pos = l_con_len.
            APPEND wa_attachx TO content.
            FREE wa_attachx.
            l_con_pos = 0.
          ENDIF.
          MOVE <fs_con>+l_pdf_pos(1) TO wa_attachx-line+l_con_pos(1).
          ADD 1 TO l_con_pos.
        ENDDO.
      ENDLOOP.
      IF l_con_pos > 0.
        APPEND wa_attachx TO content.
      ENDIF.
      TRY .
    *     -------- create persistent send request ------------------------
          send_request = cl_bcs=>create_persistent( ).
    *     -------- create and set document with attachment ---------------
    *     create document from internal table with text
          document = cl_document_bcs=>create_document(
                        i_type    = 'RAW'
                        i_text    = mail_body_tab
                        i_subject = email_subject ).
    *     add attachment to document
          CALL METHOD document->add_attachment
            EXPORTING
              i_attachment_type    = 'PDF'
              i_attachment_subject = attachment_name
              i_att_content_hex    = content.
    *     add document to send request
          CALL METHOD send_request->set_document( document ).
    *    Set sender
          sender = cl_cam_address_bcs=>create_internet_address( sender_id ).
          CALL METHOD send_request->set_sender
            EXPORTING
              i_sender = sender.
    *     Receipients
          LOOP AT receipients_tab INTO wa_receipients .
            lv_rec = wa_receipients-receiver.
            recipient = cl_cam_address_bcs=>create_internet_address( lv_rec ).
    *       Add recipient with its respective attributes to send request
            CALL METHOD send_request->add_recipient
              EXPORTING
                i_recipient = recipient.
          ENDLOOP.
    * Set that you don't need a Return Status E-mail
          status_mail = 'N'.
          CALL METHOD send_request->set_status_attributes
            EXPORTING
              i_requested_status = 'N'
              i_status_mail      = status_mail.
    * set send immediately flag
          send_request->set_send_immediately( 'X' ).
    * Send document
          CALL METHOD send_request->send( ).
    *      COMMIT WORK.
        CATCH cx_bcs INTO bcs_exception.
          RAISE EXCEPTION bcs_exception.
    ENDTRY.
    This is in a Class which is been used in the print program for both the Output Types.
    Can somebody throw light upon this.
    Note: I tried using
    but it is not working properly.
    Thanks,
    Prashanth
    Edited by: Prashanth KR on Jan 5, 2010 6:20 AM

    Hi,
    Please paste the part of code where you are getting error.
    And if you are not clear about where the error is, try searching sdn or google with the error message that you are getting as this issue has been discussed many times earlier.
    Check this link.
    Error while opening PDF in mail attachment
    Hope it helps.
    Regards,
    Raj

  • Error while opening a report in FRstudio client machine.

    Hi,I'm getting below error while opening a report in FRstudio client machine. please help me if any of you resolved this issue earlier.
    client laptop: 64bit windows7
    hyperion version: 11.1.2.2
    error msg:
    "HARSnapin Initialize() Error -2147467259 - ; nested exception is:
         java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
         java.io.InvalidClassException: com.hyperion.reporting.graphics.GridObject; local class incompatible: stream classdesc serialVersionUID = 5432192847655595077, local class serialVersionUID = -5245705824007679661"
    thanks

    I've seen umarshalling error when there is a difference between the client and server version. Is there a patch applied? I would recommend to uninstall the existing one and install if from Workspace. (this will ensure that you've the correct client version)
    Regards
    Celvin
    http://www.orahyplabs.com

  • Error while opening a Data base view

    Iam getting error while opening  a database view saying view is not maintained at the database level.
    what i should do

    If the object is not "Active" in SE11, then activate it.
    If the object is "Active" in SE11, then go to SE14, and enter the name of the view and click "Edit".  On the next screen, I would assume that it says something like,  "Does NOT exist in the database".  If that is the case, you could probably click the "Create Database View" button near the bottom of the screen.  This will then create the view at the DB level.  You should always have to do this, sometimes things have problems when creating the object in SE11, and you have to do the SE14. 
    Regards,
    Rich Heilman

  • Error while opening a datafile in dataprep editor

    Hi
    Error while opening a datafile in dataprep editor
    "opening the datafile failed see the message panel for details"
    "server.com.DEV.Perf     Read data file     September 17, 2009 8:31:51 AM EDT     Failed : 1030001"
    can anyone help me through this error..
    right i am trying to load data by creating a rules file..but could not open the file in dataprep editor..
    Thanks,
    Ram

    In some cases restarting the EAS service has fixed this error for me.

  • Error while opening the receipt entry form in AR module.

    Error while opening the receipt entry form in AR module. We have created one new responsibility of Receivables for new operating unit . When we open the corresponding
    forms , we are getting the error message as :
    NO_DATA_FOUND
    FRM-40735: PRE-FORM trigger raised unhandled exception ORA-20002.
    Kindly help in resolving.
    We have ERP version of 11.5.10.2

    Please also see the following docs.
    Transactions Workbench Error: Listing of ORA Errors [ID 1336495.1]
    FRM-40735 ERROR OPENING LIFE EVENT REASONS FORM BENLEVRS [ID 1517593.1]
    APP-AR-96996: The Defined Sales Representatives Have Incorrect Id'S [ID 437107.1]
    ARXSUDRC Receipt Classes Errors With APP-AR-96994: Please Define Sales Representatives [ID 357454.1]
    Thanks,
    Hussein

  • Error while opening .PDF files in document library sharepoint 2013

    Hi
    I am getting an error while opening a .pdf file,
    Please help me find the solution.
    Thanks
    Paru

    Launch IE -> Click on Gear (settings) -> Manage Add-ons -> Show: All Add-ons ->
    There are 2 Adobe Add-ons:
    Adobe PDF Reader  &  Adobe Acrobat Sharepoint Open Document
    Double-click both and be sure to click the button "ALLOW ON ALL SITES"
    (An * will appear in the field)
     http://crowdsupport.telstra.com.au/t5/T-Suite-Applications/There-was-an-error-opening-this-document-The-filename-directory/td-p/197425
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/ae2eea40-9fa6-46be-bca1-ac5eb5597d5e/sharepoint-2010-adobe-reader-error-opening-pdf-files?forum=sharepointgeneralprevious
    http://community.office365.com/en-us/f/154/t/46204.aspx?PageIndex=2
    disable the Mcafee Firewall Plug In.  This is after of course I ran superantispyware to remove some malware.  uninstalled and reinstalled the Adobe Reade
    https://forums.adobe.com/message/1776202?tstart=0

  • Request timed out.- Error while opening a item in Blog

    Hi,
       We have a blog in our share point portal which was running properly before few days.
    We get Request Timed out error while opening an item in the blog. The list contains about        
       3500 items
    [HttpException (0x80004005): Request timed out.]
    We were able to create a new item but not able to view the item.
    When we check the server SQLSERVR.EXE takes more than 90% of the CPU Usage.
    Please let me know how to resolve this issue.
    Thanks,
    Vanitha

    Hi,
    According to your description, Please check the RAM allocated to your SQL server. MOSS server needs 2GB RAM
    to preform well. SQL requires 2GB RAM for optimum performance.
    Messages like this are mainly due to lack of RAM Allocation.
    Best Regards
    David Hu

  • Error 500--Internal Server Error while opening a taskflow  in inline popup

    Hi,
    I am getting "Error 500--Internal Server Error" while opening a bounded taskflow as a popup from another bounded taskflow containing page fragments. The popup taskflow contains jspx pages. I even removed the jspx pages from the popup taskflow to check if the error is resulting from the bindings on the pages but still I get the same error. The entire stack trace of the error in the popup dialog is :
    Error 500--Internal Server Error
    oracle.adf.controller.ControllerException: ADFC-04008: The BindingContext on the session is null.
         at oracle.adfinternal.controller.util.Utils.createAndLogControllerException(Utils.java:208)
         at oracle.adfinternal.controller.util.model.AdfmUtil.getBindingContext(AdfmUtil.java:47)
         at oracle.adfinternal.controller.util.model.DCFrameImpl.makeCurrent(DCFrameImpl.java:125)
         at oracle.adfinternal.controller.state.ViewPortContextImpl.makeCurrent(ViewPortContextImpl.java:1006)
         at oracle.adfinternal.controller.state.RequestState.setCurrentViewPortContext(RequestState.java:159)
         at oracle.adfinternal.controller.state.ControllerState.setRequestState(ControllerState.java:900)
         at oracle.adfinternal.controller.state.ControllerState.synchronizeStatePart1(ControllerState.java:355)
         at oracle.adfinternal.controller.application.SyncNavigationStateListener.beforePhase(SyncNavigationStateListener.java:105)
         at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.beforePhase(ADFLifecycleImpl.java:551)
         at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchBeforeEvent(LifecycleImpl.java:100)
         at oracle.adfinternal.controller.lifecycle.LifecycleImpl.dispatchBeforePagePhaseEvent(LifecycleImpl.java:147)
         at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.dispatchBeforePagePhaseEvent(ADFPhaseListener.java:112)
         at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.beforePhase(ADFPhaseListener.java:59)
         at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.beforePhase(ADFLifecyclePhaseListener.java:44)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:258)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
         at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Any help is greatly appreciated.
    Thanks,
    KK

    Hi Frank,
    Thanks for the reply. I am using it as an inline popup. I am trying to create command links dynamically in an iterator. When a link is clicked a popup window opens. The text of the link is passed to the popup window by creating a variable in the session scope ( I even tried request scope) by an action listener in the backing bean.
    I tried to create another simple application with a static command button which passes its text to popup window through a session scope variable. It worked fine. I am not sure why the same procedure is not working in my original application. Can you give me a hint what could possibly go wrong according the exception stack trace ?
    Thanks,
    KK

  • APEX 4.0: error while opening a XLS file downloaded from interactive report

    Hi,
    I'm getting below error while opening a XLS file downloaded from an interactive report (APEX 4.0).
    "The file you trying to open, 'customer_2.xls', is in a different format than specified by the file extension.
    Verify that the is not corrupted and is from a trusted source before opening file. Do you want to open file."
    Yes No Help
    May be this one Apex 4.0 issue.
    please help me.
    Thanks
    Mukesh

    Hi,
    is the next part of the code correct.
    What i mean is packing of the attachment, finding out the size of pdf file and doc type as PDF.
    You can also try below link..
    Link: [http://wiki.sdn.sap.com/wiki/display/Snippets/SENDALVGRIDASPDFATTACHMENTTOSAPINBOXUSINGCLASSES]
    Hope this helps.
    Regards,
    -Sandeep

  • Getting error while opening Excel document from SharePoint site

    Hello All,
    I am getting following error while opening Excel document from SharePoint site.
    This issue appears when we open Excel document from Windows>> Run using below mentioned command:
    Excel.exe "{File Name}"
    If once I go to Excel back stage and browse for the SharePoint location, then this problem disappears.
    I have a work around for this issue but main problem is that i do not have any work around when i need to open Exel document using Excel COM interop in C#.
    Thanks,
    Amit Bansal
    Amit Bansal http://www.oops4you.blogspot.com/

    Hi Amit Bansal,
    Thanks for posting in MSDN forum.
    This forum is for developers discussing developing issues involve Excel application.
    According to the description, you got an error when you open the document form SharePoint site.
    Based on my understanding, this issue maybe relative to the SharePoint, I would like move it to
    SharePoint 2013 - General Discussions and Questions forum.
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
    Thanks for your understanding.
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Error while opening the document

    Hi,
    i av created the document.while i m trying to oopen the document in tcode :CV02N it s giving me a message as "40.960 bytes transmitted , Code page 0000"
    Could me pls tel me what is this message and how to solve this..
    Regards
    Bhanu

    Hi,
    Kindly elaborate is this error while opening original attached in DIR or?
    If yes!
    check in DC20-->whether data carrier is defined
    check in DC30-->whether workstation application file is defined propelry or not.
    Regards,
    Seema Pilankar

  • Error while opening office document

    Hello Gurus!
    I try to use word intergation in WebIC (CRM 5.0). In "Create lead" trunsaction (CL_CRM_IC_ABOXSAMPLE_CR_LEAD class) I have Attachment tab. When I click "Create document with template" buton I get "Error while opening office document" error. In IE settings ActiveX is on. What should I do to make it work?
    Best regards,
    Artur.

    Hello Artur,
    Try this Note:
    Note 606745 - CRM Content Management: Document does not open
    It's not exactly for that issue but it may help.
    Good Luck
    Eli Steklov
    Please Reward Points if it Helped

  • Getting below error while opening query in bex  3.5x

    Dear Guru's
    I am getting below error while opening query in bex  3.5x
    The following object were not found when accesing the server .
    Press repair to correct the problem (included parts of query deleted) press cancel to undo the last action.
    Regards
    Karan

    Hi,
    1) When a query administrator with the sufficient authorization (sap_all or the * authorization for the field in the authorization object) is creating the query in query designer including the 'attributes' which are not visible with the 'normal' authorizations, the query will not list the columns in the output when it is executed by the normal user.
    2) so create an authorization object for each of these attributes with * (full authorization)
    Regards,
    Marasa.

  • Error while opening JDBC connection

    Hi
    The JDBC connection works in the current page, but when I clicked a tab to go to another page using the same database, I received the error:
    Error while opening JDBC connection.
    ORA-01005: null password given; logon denied
    Unexpected exception caught: java.lang.NullPointerException, msg=null
    I used jdbc data source, I assume. In the application module configuration, there are two listed there. One is UserServiceLocal, the other one is UserServiceShare where datasource is specified. I also specify the dataSource in the Domain server admin console. I deleted cwallet.sso file. My development and deployment machine is Vista.
    I would appreciate your input!

    have you explicitly mentioned username password in your connection string?

Maybe you are looking for

  • Report to see in transit stock .

    Hi Gurus Is there in any standard report ,by which I can make out how much stock is in transit on the material group level-: 1. b/w the plants 2. b/w the vendors for which inbound delivery has been created ,but the GR has not been done. Thanks in adv

  • How to create right to left  tree  in  apex

    hi all i want to create RTL tree in oracle apex , Who can advise?

  • Everytime i delete my messages they always reappear

    Hi Hoping someone maybe able to help! I have an iphone 5c. Have loads of messages due to the fact that whenever i delete them and then i turn phone off and back on they always reappear. Its getting really frustrating. Ive synced my phone just now aft

  • Big Problems with Audigy 4 and Vista 64

    Hi there,?I got the Audigy 4 running under Vista 64 Bit. The onboard Soundmax, connected to the speakers in my?Monitor?is acti've, too. The Audigy is connected to a 5. System from Teufel. With XP64 all ist working fine: The systemsounds come out of t

  • /src/core/pkg is missing

    Im trying to install Arch Linux, In the installation process, during step one i am selecting the source. it says 'package directory /src/core/pkg is missing´. what does that mean? the installation then fails. what´s the problem?