Error while opening Oracle Database 11g Express Edition after installation.

After finishing the installation of Oracle database 11g Express Edition, when I tried to open it, it shows following error : windows cannot find `http://127.0.0.1:%HTTPPORT%/apex/f?p=4950`.Make sure you typed the name coorectly, and then try again.
What the above error means? I followed the installation steps as given in the link.

Hi,
Follow thread may help you.
<<Newbie on running Oracle 11g - Windows cannot find http:something
Regards,

Similar Messages

Problem in installing oracle database 11g express edition

while installing oracle database 11g express edition during product specific prerequisite check, checking for oracle XE service instance is failed, what to do ?

Hello, and welcome to the OTN forums,
the prerequisites are documented quite well. I'm not sure about the actual error message, but from what you write it sounds like you already have another Oracle XE install on your machine, possible the Oracle 10g XE. As mentioned in the Installation Guide, you may have only one instance per server, so the installer fails.
If that's not the reason, can you please post the exact error message you receive?
-Udo

How to install oracle database 11g express edition on Windows 7

Hi Guys,
i am trying to download and install Oracle database 11g express edition on windows7 and i can't seem to get it right. i did get the download but when i try to install, it keeps saying it appears to be an invalid archive.
Please help..

Action - Refer to the logs or contact OracleFinding the problem is the key. "Refer to the logs" is the only option, XE has no oracle support offerings.
Which plugin failed, and why did it fail will be important clues. There should be error messages in the log that will be helpful.
Otherwise, we don't have much help to offer. Fixing a problem means identifying the problem and performing steps to correct it, if there a fix is available.
A MOS lookup on the ins-20802 error has snippets from one installer session, this one is from an x64 install. Not x86. To paraphrase the details:
... Created a new file <drive>:<OH path>\cfgtoollogs\configToolAllCommands
SEVERE: java.io.IOException: Access is denied
...So from those symptoms, the user trying to run the installer does not have appropriate rights on that drive and/or folder. The fix for that particular problem is adding the user to the local administrators group. And rerunning the install. After running the deinstall steps to clean up the installation. As specified in the XE install guide for Windows.
http://docs.oracle.com/cd/E17781_01/install.112/e18803/toc.htm
Also note the System Requirements, it specifies a System architecture Intel x86, which is not X64. There is no X64 installer for XE on Windows. So it might work. Or it might not if your host is x64.
So if that is your particular error, verify that your user is in the local admins group. Either use the local users and groups applet (Start/Run/lusrmgr.msc) and open up the Administrators group. Click the Add button. Find your user. If your OS user is a windows domain user, be sure you have authenticated to the domain.
Try the `net ...` list of the adminis group, that should reveal whom is indeed in the local administrators group:
net localgroup administrators
Administrator
<domain>\Domain Admins ... # ??? is the host in windows domain ???
<domain>\Local Admins
<domain>\<user1>
<user2>
<user3>
echo %USERNAME%
# if relevant:
echo %USERDOMAIN%Like it also states in the Windows install guide, under Permission Required quote:
... must be a member of the Administrators group on Windows to install Oracle Database XE.

Oracle Database 11g Express Editionへの接続について

Oracle Database 11g Express Editionを自PCにインストールし、SQLPLUS等の接続
まで確認する事ができました。
その後、VB2008で開発を行っている事から、VB2008で接続しようと考えていますが、
どのような接続方法が最適なのでしょうか？？？
当然、最終的にはクライアント/サーバ型にしたいと考えている為、クライアントからの接続
も想定しています。
ODBCは避けたく、他に方法を探していたところ、ODP.NETで接続できると記載が
あった為、同自ＰＣにインストールし、接続を行おうと記述したところ下記のようなエラー
となってしまいます。
《記述内容》
　'Connectionオブジェクトの生成
　Dim cnn As New OracleConnection
　Dim Command As OracleCommand
'Oracleへのコネクションの確立
cnn.ConnectionString = _
"User Id=ABCD; Password=000000; Data Source=XE"
cnn.Open()
Command = cnn.CreateCommand
'SQL初期化
Command.CommandText = ""
'データリーダーにデータ取得
Command.CommandText = "SELECT COUNT(*) FROM T_東京"
《エラー内容》
　ORA-12154: TNS: 指定された接続識別子を解決できませんでした
”tnsping XE”は確認しており、問題なくとおります。
そもそも私の考え方が間違っていて、ODP.NETは使用できない？？？
記述の方法が間違っている？？？
初歩的な質問で申し訳ありませんが、教えて頂きたいと思います。
よろしくお願いします。

.netアプリを作成しているならばODP.netでの接続がベストだと思います。
ORA-12154が発生するのは参照しようとしているtnsnames.oraの中に"XE"という接続定義が見つからないためと思われます。
tnspingでは問題なく疎通できる＋ODP.netを追加インストールしたとのことから
odp.netをインストールしたORACLE_HOME配下のtnsnames.oraにXEという定義がないのだと思います。
(XEのORACLE_HOME配下のtnsnames.oraにのみXEの定義がされている)
ちなみに、tnsnames.oraは以下にあります。
%ORACLE_HOME%\NETWORK\admin\tnsnames.ora
そもそも私の考え方が間違っていて、ODP.NETは使用できない？？？
ORA-12154が発生するところまで進んでいるのでODP.net自体は使用できています。
ODP.net自体が使用できない状態だと OracleConnectionオブジェクトの生成の時点でエラーになるはずなので。
あと、tnsnames.oraを参照しないで接続できる簡易接続ネーミングという記載方法もあります。
例)
Data Source=localhost:1521/XE
参考
http://www.doppo1.net/oracle/beginner/network_connect_2.html

Oracle Database 11g Express Edition (11.2) Beta is now available!

[url http://forums.oracle.com/forums/forum.jspa?forumID=1378]Forum Home » Database » Oracle Database 11g Express Edition Beta ばかりじゃなんなので、
Forum Home » コミュニティ » OTNカフェに [url http://forums.oracle.com/forums/thread.jspa?threadID=2201589]Thread: Oracle Database 11g Express Edition (11.2) Beta is now available! を作ったのですが、この Japanese Discussion Forums にも、めでたくこの [url http://forums.oracle.com/forums/forum.jspa?forumID=1380]Forum Home » データベース » Oracle Database 11g Express Edition Beta ができましたので、OTNカフェの Thread をこの Threadへ引越しました。
既に OTN Japan の [url http://www.oracle.com/technetwork/jp/database/express-edition/overview/index.html]Oracle Technology Network > Database Database > Express Edition > Overview にも載っていますが、[url http://www.oracle.com/technetwork/database/express-edition/11gxe-beta-download-302519.html]http://www.oracle.com/technetwork/database/express-edition/11gxe-beta-download-302519.html から " Oracle Database 11g Express Edition Release 11.2.0.2.0 - Beta "がダウンロードできます。
[url http://forums.oracle.com/forums/forum.jspa?forumID=1378]Forum Home » Database » Oracle Database 11g Express Edition Beta を見てみたり、コメントしてフィードバックするのを楽しんでます。
【補足】
現行リリース Oracle Database 10g Express Edition ( 俗称 Oracle Database XE や Oracle XE や OracleXE )関連 Oracle Technology Network (OTN) Japan - 掲示板 » コミュニティ » OTNカフェのスレッドなど：
[url http://otn.oracle.co.jp/forum/thread.jspa?threadID=5001436]Oracle 10g Express Editionに興味深々
[url http://otn.oracle.co.jp/forum/thread.jspa?threadID=5001550]Oracle Database 10g Express Edition Beta 3
[url http://otn.oracle.co.jp/forum/thread.jspa?threadID=35004868]OracleXEに関する座談会
"Project XE" (Oracle Database XE in Japan) - S/N Ratio (by SATO Naoki) [url http://d.hatena.ne.jp/satonaoki/20081202/p1]http://d.hatena.ne.jp/satonaoki/20081202/p1
Edited by: wmo6hash on Apr 24, 2011 3:45 AM Blogosphere は別の Message へ

そうですね。Oracle Database 11g Express Edition BetaフォーラムなのでBetaのことだけ書いていました。

VSS for Oracle Database 11g Express Edition?

I use Veeam to backup our servers.
I have a Windows 2003 R2 Std edition. On it we have Oracle Database 11g Express Edition (upgraded from 10g).
I would like to enable application-aware image processing (VSS)
I do not have the Oracle VSS Writer Service installed, and the oravssw.exe is not in the oracle folder.
1. Does Oracle Database 11g Express Edition support/include Oracle VSS Writer?
2. If I get the oravssw.exe from another (not express) oracle database, can I copy it and use it on my 11g Express Edition to create the Oracle VSS Writer?
Thanks in advance

909351 wrote:
Thanks. So I guess I will have to use 10g XE on my 32 bit Linux
Its interesting 10g XE was for 64 bit and 11g XE is for 32 bit.The other way around. 10.2 is 32-bit and 11.2 is 64-bit. Seems like a logical or natural progression (haven't seen a 32-bit machine for some years now).

Oracle DB 11g Express Edition Find directory home path in Windows 7

Hello,
I am working through a PL/SQL Programming book and I am on PROGRAM UNIT DEPENDENCIES. As I work through the examples it asks me to use the Dependency Tree Utility by running this script in SQL*Plus: @<path to Oracle Home directory>\rdbms\utldtree
However, no matter where I look on my computer (Win7 Home) I cannot figure out the directory path. I looked elsewhere and it was suggested that Windows stores the directory in the registry. I went to regedit and followed Hkey_Local_Machine\Software\Oracle....and found 'c:\oraclexe\app\oracle\product\l11.2.0\server'
I tried that as the directory path, but no luck. Plus I cannot even find any file folders for the DB that contains 'rdbms'.
So my question is, is there a directory HOME or BASE path in windows 7 for Oracle database 11g Express Edition and or does the 11g Express Edition have the utldtree.sql file somewhere?
Thanks in advance for any help,
Warren

I have a lot of utl*.sql files, including the one you named, in C:\oracle\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin.
You should also be able to reach the location when running in sqlplus, via "?" shortcut, e.g.
SQL> @?/rdbms/admin/utldtree
There's also a way to print top dir of Oracle Home in sqlplus - e.g. path inside square brackets below:
SQL> @.[%oracle_home%].
SP2-0310: unable to open file ".[C:\oracle\oraclexe\app\oracle\product\11.2.0\server]..sql"

Installation error - Oracle Database 10g Express Edition

Hi - I've just tried to install Oracle Database 10g Express Edition from the Oracle website and I'm getting this error.
Error 1327 Invalid Drive: I:\ . I've googled the error but can't find much. It seems that the path is hardcoded into the msi installation package.
Anyone else seen this issue before as I'm at a loss at what to do ?
I'm wondering do I have to create an I:\ drive on my machine but that seems a little unusual
Hope someone can help
Cheers.

This problem may occur if you have used the Disk Administrator utility included in Microsoft Windows to change the drive letter of the hard disk that the operating system is installed on, for example, the C drive.
The problem occurs because the Oracle Universal Installer uses registry keys to determine the locations of certain folders that are required to install Oracle. If the drive letter of the hard disk that contains the operating system has been changed, the registry keys refer to nonexistent folders and Setup fails.
To correct this problem, use the Windows Disk Administrator program to restore the drive letter of the hard disk to its original value:
1. Click Start, point to Programs, point to Administrative Tools, and click Disk Administrator.
2. Right-click the drive whose letter you want to change. On the shortcut menu, click Assign Drive Letter.
3. Select the correct drive letter from the list and click OK.
If you are prompted to quit the Disk Administrator or to restart your computer, do so. Once the computer has restarted, attempt to install again.

Problem upgrading Apex 2.1 to 3.2.1 in Oracle Database 10g Express Edition

G'Day Apex gurus,
I installed Oracle Database 10g Express edition in my Windows XP PC which comes with Apex 2.1 with no problems. Then I wanted to upgrade Apex 2.1 to 3.2.1 (Currently Apex download in OTN) following the document below:
http://www.oracle.com/technology/products/database/application_express/html/3.1_and_xe.html
I went to the steps:
@apexins SYSAUX SYSAUX TEMP /i/
Then to change the password for the admin account run apxchpwd.sql and when prompted enter a password for the ADMIN account.
@apxchpwd
with not problems
Then I connected to SQL*Plus as SYS by:
sqlplus /nolog
CONNECT SYS as SYSDBA
Enter password: xxxxxxxxxxx
but when I tried to run:
@APEX_HOME/apex/apxldimg.sql APEX_HOME
where APEX_HOME is Apex3.2.1 in my case
SQL> @Apex3.2.1/apex/apxldimg.sql Apex3.2.1 (I get the messages below)
PL/SQL procedure successfully completed.
old 1: create directory APEX_IMAGES as '&1/apex/images'
new 1: create directory APEX_IMAGES as 'Apex3.2.1/apex/images'
Directory created.
declare
*+
ERROR at line 1:
ORA-22288: file or LOB operation FILEOPEN failed
The system cannot find the path specified.
ORA-06512: at "SYS.DBMS_LOB", line 523
ORA-06512: at "SYS.XMLTYPE", line 287
ORA-06512: at line 15
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
Commit complete.
timing for: Load Images
Elapsed: 00:00:00.17
Directory dropped.
Can anyone help me in how to trouble shout this?
I tried to continue by following the steps document
@APEX_HOME/apex/apxxepwd.sql password
(where password is the password of the Application Express internal ADMIN account)
but when I tried to login in:
http://localhost:8080/apex/f?p=4550:1
when I type the credentials
system
system
systempassword
nothing happens
or even If I try:
http://localhost:8080/apex/f?p=4550:10
admin
adminpassword
nothing happens here too.
I appreciate any help
Kind regards
Carlos

My database version is 10.2.0.1.0 Oracle express.
Operating system is Windows Vista.
I started installing using the following commands.
@ C:\temp\apex\apexins.sql
it prompts me for the values of sysaux sysaux temp and c:\temp\apex\images\
If I supply the value for images the sqlplus window closes after scrolling a lot of info.
Enroute it also prompts me for a value for 9:
I don't know what the input shall be.
Then it again stops at enter value for version:
I used 3.2.1.0
The window scrols a while and closes.
later I changed the password and ran the command.
@c:\temp\apex\apxldimg.sql c:\temp
but no success with installation.
the output is as following.
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Nov 27 18:13:43 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect system/sairam as sysdba;
Connected.
SQL> @ c:\temp\apex\apxchpwd
Enter a value below for the password for the Application Express ADMIN user.
Enter a password for the ADMIN user []
Session altered.
...changing password for ADMIN
wwv_flow_security.g_security_group_id := 10;
ERROR at line 3:
ORA-06550: line 3, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_SECURITY_GROUP_ID' must be declared
ORA-06550: line 3, column 5:
PL/SQL: Statement ignored
ORA-06550: line 4, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_USER' must be declared
ORA-06550: line 4, column 5:
PL/SQL: Statement ignored
ORA-06550: line 5, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_IMPORT_IN_PROGRESS' must be declared
ORA-06550: line 5, column 5:
PL/SQL: Statement ignored
ORA-06550: line 8, column 23:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 7, column 15:
PL/SQL: SQL Statement ignored
ORA-06550: line 13, column 32:
PLS-00364: loop index variable 'C1' use is invalid
ORA-06550: line 12, column 9:
PL/SQL: Statement ignored
ORA-06550: line 19, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_IMPORT_IN_PROGRESS' must be declared
ORA-06550: line 19, column 5:
PL/SQL: Statement ignored
Commit complete.
SQL> @c:\temp\apex\apxldimg.sql c:\temp
PL/SQL procedure successfully completed.
Directory created.
if wwv_flow_utilities.db_version_is_at_least('11') then
ERROR at line 32:
ORA-06550: line 32, column 25:
PLS-00302: component 'DB_VERSION_IS_AT_LEAST' must be declared
ORA-06550: line 32, column 3:
PL/SQL: Statement ignored
PL/SQL procedure successfully completed.
if wwv_flow_utilities.db_version_is_at_least('11') then --11g only
ERROR at line 16:
ORA-06550: line 16, column 25:
PLS-00302: component 'DB_VERSION_IS_AT_LEAST' must be declared
ORA-06550: line 16, column 3:
PL/SQL: Statement ignored
Commit complete.
timing for: Load Images
Elapsed: 00:00:00.32
Directory dropped.
SQL>
Does this require XE 11 or anything else.
This will happen even if I supply as following(closing of sqlplus in the begining).
@ C:\temp\apex\apexins.sql sysaux sysaux temp c:\temp\apex\images\
Any help.

Oracle Database 10g Express Edition & linux Fedora

Hi guys
How are you doing?
I want to ask about my problem which is I can't access to the home page of Oracle Database 10g Express Edition when I press on "Go To Database Home Page" it's open firefox but does not do any thing by the way I try to write the web page http://127.0.0.1:8080/apex on the address bar but firefox give me an error which is "Unable to connect"
So please when you know the solution post it here step by step "I'm beginner linux user" .
My distribution is Fedora 14
..Thanks a lot
Saleh

Was the configure step completed successfully?i.e., did you run
/etc/init.d/oracle-xe configure after you installed the rpm? This is similar in XE 10g and 11g beta. You can run this again to reenter your configuration parameters, especially concerning HTTP port, and make sure they have the expected values that way.
Despite that, you could try to (re)start the service, and see if it comes up without errors.
/etc/init.d/oracle-xe stop
/etc/init.d/oracle-xe startIf everything doesn't look too bad, you could have a port conflict with another service using port 8080. In that case, you could reconfigure XE to have its HTTP server listening to a different port.
-Udo

Errors while installind Oracle Database 11gR2

At the step "Oracle Database Configuration Assistant i got the following error: link
And i don't know why, and what to do. Can you help me?
Thanks!
Edited by: Roger22 on 14.07.2010 20:25

Wed Jul 14 20:38:54 2010
AUD: OS Error = 1502 encountered while writing audit record
AUD: OS Error = 1502 encountered while writing audit record
Starting ORACLE instance (normal)
Wed Jul 14 20:39:13 2010
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as D:\oracle\product\11.2.0\dbhome_1\RDBMS
Autotune of undo retention is turned on.
IMODE=BR
ILAT =27
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Using parameter settings in client-side pfile D:\ORACLE\PRODUCT\11.2.0\APP\SORIN\ADMIN\ORCL\PFILE\INIT.ORA on machine ROGER
System parameters with non-default values:
processes                = 150
nls_language             = "ROMANIAN"
nls_territory            = "ROMANIA"
memory_target            = 816M
control_files            = "D:\ORACLE\PRODUCT\11.2.0\APP\SORIN\ORADATA\ORCL\CONTROL01.CTL"
control_files            = "D:\ORACLE\PRODUCT\11.2.0\APP\SORIN\ORADATA\ORCL\CONTROL02.CTL"
db_block_size            = 8192
compatible               = "11.2.0.0.0"
undo_tablespace          = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain                = ""
dispatchers              = "(PROTOCOL=TCP) (SERVICE=orclXDB)"
audit_file_dest          = "D:\ORACLE\PRODUCT\11.2.0\APP\SORIN\ADMIN\ORCL\ADUMP"
audit_trail              = "DB"
db_name                  = "orcl"
open_cursors             = 300
diagnostic_dest          = "D:\ORACLE\PRODUCT\11.2.0\APP\SORIN"
Wed Jul 14 20:39:18 2010
PMON started with pid=2, OS id=5252
Wed Jul 14 20:39:18 2010
VKTM started with pid=3, OS id=4052 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Wed Jul 14 20:39:18 2010
GEN0 started with pid=4, OS id=4392
Wed Jul 14 20:39:18 2010
DIAG started with pid=5, OS id=4924
Wed Jul 14 20:39:18 2010
DBRM started with pid=6, OS id=5692
Wed Jul 14 20:39:18 2010
PSP0 started with pid=7, OS id=5120
Wed Jul 14 20:39:18 2010
DIA0 started with pid=8, OS id=3532
Wed Jul 14 20:39:19 2010
MMAN started with pid=9, OS id=4196
Wed Jul 14 20:39:19 2010
DBW0 started with pid=10, OS id=504
Wed Jul 14 20:39:19 2010
LGWR started with pid=11, OS id=1252
Wed Jul 14 20:39:19 2010
CKPT started with pid=12, OS id=3776
Wed Jul 14 20:39:19 2010
SMON started with pid=13, OS id=5408
Wed Jul 14 20:39:19 2010
RECO started with pid=14, OS id=4776
Wed Jul 14 20:39:19 2010
MMON started with pid=15, OS id=4980
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Wed Jul 14 20:39:19 2010
MMNL started with pid=16, OS id=752
starting up 1 shared server(s) ...
ORACLE_BASE from environment = D:\oracle\product\11.2.0\app\Sorin
Wed Jul 14 20:39:19 2010
AUD: OS Error = 1502 encountered while writing audit record
Wed Jul 14 20:43:13 2010
AUD: OS Error = 1502 encountered while writing audit record
AUD: OS Error = 1502 encountered while writing audit record
Wed Jul 14 20:48:34 2010
alter database open
ORA-1507 signalled during: alter database open...
alter database mount
Wed Jul 14 20:48:41 2010
ORA-00210: nu se poate deschide fisierul de control specificat
ORA-00202: fisier de control: 'D:\ORACLE\PRODUCT\11.2.0\APP\SORIN\ORADATA\ORCL\CONTROL02.CTL'
ORA-27041: fisierul nu a putut fi deschis
OSD-04002: fişierul nu a putut fi deschis
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-00210: nu se poate deschide fisierul de control specificat
ORA-00202: fisier de control: 'D:\ORACLE\PRODUCT\11.2.0\APP\SORIN\ORADATA\ORCL\CONTROL01.CTL'
ORA-27041: fisierul nu a putut fi deschis
OSD-04002: fişierul nu a putut fi deschis
O/S-Error: (OS 2) The system cannot find the file specified.
Wed Jul 14 20:48:43 2010
Checker run found 2 new persistent data failures
ORA-205 signalled during: alter database mount
...This is what that file contains
Roger..

How to Connect Oracle Database 10g Express Edition ?

From example
http://www.oracle.com/technology/obe/hol08/dotnet/getstarted-c/getstarted_c_otn.htm
using Oracle.DataAccess.Client; // ODP.NET Oracle managed provider
using Oracle.DataAccess.Types;
string oradb = "Data Source=ORCL;User Id=hr;Password=hr;";
OracleConnection conn = new OracleConnection(oradb); // C#
conn.Open(); <== Connect Error
Error Message "ORA-12154: TNS:could not resolve the connect identifier specified"
I used
Visual Studio 2005
Oracle Database 10g Express Edition
setup "Oracle Developer Tools for Visual Studio .NET with ODAC 10.2.0.2.21"
Best Regards,
Edited by: user1949694 on 8 ก.ย. 2552, 9:20 น.

I search "tnsnames.ora" in my computer. I found 3 file
1. C:\oraclexe\app\product\10.2.0\server\hs\admin\tnsnames.ora
2. C:\oraclexe\app\product\10.2.0\server\NETWORK\ADMIN\tnsnames
3. C"\oraclexe\app/product\10.2.0\server\NETWORK\ADMIN\SAMPLE\tnsnames
How to entry in your tnsnames.ora file File1, File2, File3
How to called "ORCL"?
Please Help Me Step by Step
Thank You.
: )

Oracle Database 10g Express Edition Beta 2 Installation

Oracle Database 10g Express Edition Beta 2 Release for Microsoft Windows installation successful, no problems.

Hi Rekha,
The format mask 999G999G999G999G990D0000 is the format mask that I selected from the software itself. I also use this format mask for a single record update. If' s ok, no error, but with tabular form with multiple record update, it shows error .I also changed the decimal point to two digits ,select from software pop-up window (this was tested in the workspace provide by Oracle). It still shows error. Last test I put the space like 1 111,111.00 in a single record update it shows error (but if I put 1 in front of 111,111 without space it's ok-no space before). My point is from user point of view.In the first time user input 100000 the software accept it. Opp! it has to be 1100000. The user comes back after submit and put 1 without comma.It shows error (in tabular form with multiple record update not in single row update). While in the first time the user do not to key any comma at all. This may makes some confuses both the users and the developers which had to check error by adding program to checking some where in Page Processing or Page Rendering.
Thanks
Tritep

Can't access Home Page - Oracle Database 10g Express Edition...

Hi,
I have been running the Oracle Database 10g Express Edition on my Windows XP machine for years from this location:
C:\Applications\OracleDatabaseExpress\app\oracle\product\10.2.0\server\Database_homepage.url
In Properties of the Database_homepage.url file, the URL is:
http://127.0.0.1:8080/apex
However, when I double-click on the Database_homepage.url file, I get the message "The Page cannot be displayed" in IE. I do run the "net start OracleXETNSListener" utility first.
I only ran it last week. After that, I did run a couple of virus checks that deleted a couple of trojan viruses.
What could have gone wrong suddenly? Any help would be greatly appreciated. Thanks a lot!
Edited by: markk2 on Mar 1, 2011 9:18 PM

Hi Mark;
Nice to hear issue solved ;) Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios

Error while opening the database.--urgent---pls help...

Hi,
Got the below error while opening the database.
Database version is :10.1.0.4.0
database is in noarchive log mode.
the database is coming in to no-mount state and mount state quite easily but not able to open the database.
Got the below error while opening the database.
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
Mon Sep 29 15:32:39 2008
Errors in file /xxx/udump/aaa_ora_18737.trc:
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
Mon Sep 29 15:32:41 2008
DEBUG: Replaying xcb 0xc0000000350c1c18, pmd 0xc0000000353b21f0 for failed op 8
Doing block recovery for file 2 block 9483
No block recovery was needed.
on Sep 29 15:34:01 2008
Errors in file /xxx/udump/aaa/bdump/aaa_pmon_18723.trc:
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
Mon Sep 29 15:34:04 2008
Errors in file /xxx/udump/aaa/bdump/aaa_pmon_18723.trc:
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
PMON: terminating instance due to error 472
Instance terminated by PMON, pid = 18723
Please help me....................

Hi..
This ORA-600 refers to a mismatch has been detected between Redo records and rollback (Undo) records.Is better to lock a call with oracle support.Secondly, apply latest patch on the DB.
I had expereiced the same error, but my DB was in open mode, so i created a new undo tablespace and changed the undo_tablespace parameter and it worked.
Anand

Error while opening Oracle Database 11g Express Edition after installation.

Similar Messages

Maybe you are looking for