Error while Oracle 10g Installation suse linux

Hi,
All i am facing issue while installing Oracle 10g release 2 on open suse.
All test are getting passed but getting a error reltated to ip address as follows.
INFO: Checking DetectIfDHCPAssignedIP
This is a prerequisite condition to test whether the primary IP address of the system is DHCP-assiged or static.
INFO: Detecting the IP.....:10.31.215.64
INFO: Checking the network interface display name.... :eth0
INFO: Checking the network reference name..... :eth0
INFO: Checking the platform .......46
INFO: Checking the LINUX vendor .... :SuSE
INFO: Check complete. The overall result of this check is: Not executed <<<<
Also while installing getting error as,
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public
IP addresses. However, the primary network interface on the system should be
configured with a static IP address in order for the Oracle Software to function
properly. See the Installation Guide for more details on installing the software
on systems configured with DHCP.
Please help me to resolve issue.
BR,
Rajesh
Edited by: Rajesh.Rathod on Dec 20, 2010 12:52 AM

Hi,
I tried to follow each step of oracle documentation but network configuration requirement is failing.
please find following log.
Checking operating system requirements ...
Expected result: One of redhat-3,redhat-4,SuSE-9
Actual Result: SuSE-9
Check complete. The overall result of this check is: Passed
=======================================================================
Checking operating system package requirements ...
Checking for make-3.79; found make-3.81-128.14.     Passed
Checking for binutils-2.14; found binutils-2.19.51-10.26.4.     Passed
Checking for gcc-3.2; found gcc-4.4-4.2.     Passed
Checking for libaio-0.3.96; found libaio-0.3.104-144.2.     Passed
Check complete. The overall result of this check is: Passed
=======================================================================
Checking kernel parameters
Checking for semmsl=250; found semmsl=1250.     Passed
Checking for semmns=32000; found semmns=32000.     Passed
Checking for semopm=100; found semopm=100.     Passed
Checking for semmni=128; found semmni=256.     Passed
Checking for shmmax=536870912; found shmmax=3294967296.     Passed
Checking for shmmni=4096; found shmmni=4096.     Passed
Checking for shmall=2097152; found shmall=2097152.     Passed
Checking for file-max=65536; found file-max=131072.     Passed
Checking for VERSION=2.6.5-7.201; found VERSION=2.6.31.5-0.1-desktop.     Passed
Checking for ip_local_port_range=1024 - 65000; found ip_local_port_range=1024 - 65000.     Passed
Checking for rmem_default=262144; found rmem_default=4194304.     Passed
Checking for rmem_max=262144; found rmem_max=4194304.     Passed
Checking for wmem_default=262144; found wmem_default=262144.     Passed
Checking for wmem_max=262144; found wmem_max=262144.     Passed
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Recommended glibc version
Expected result: ATLEAST=2.3.3-98.28
Actual Result: 2.10.1-10.4
Check complete. The overall result of this check is: Passed
=======================================================================
Checking physical memory requirements ...
Expected result: 922MB
Actual Result: 5460MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking available swap space requirements ...
Expected result: 5460MB
Actual Result: 10244MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Actual Result: :java.lang.NullPointerException:Exception/Error Occurred
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
=======================================================================
Validating ORACLE_BASE location (if set) ...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Oracle Home path for spaces...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for proper system clean-up....
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for Oracle Home incompatibilities ....
Actual Result: NEW_HOME
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Actual Result: :java.lang.NullPointerException:Exception/Error Occurred
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
=======================================================================
Please suggest how to resolve.

Similar Messages

Oracle 10g installation on linux using virtual box.

Hi,
Iam trying to install oracle 10g on enterprise linux using virtual box.I downloaded oracle 10g for linux and while running the installer,Iam getting this error
Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-04-16_07-29-46AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
Please help me to solve this

user9362721 wrote:
Hi,
Iam trying to install oracle 10g on enterprise linux using virtual box.I downloaded oracle 10g for linux and while running the installer,Iam getting this error
Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-04-16_07-29-46AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directoryHi.
This question was answered in this forum yesterday. And the day before. And the day before that. And ... (Or at least it feels like we get this every day, and sometimes several times a day.)
Search for 'xhost'

How to install oracle 10g on suse linux

Hi,
can anybody let me kbow how to install oracle 10.2 on suse linux.....
i have installed suse linux but couldn;t able to install oracle 10g on the same....
looking for gud suggestion.....

These two are good to start with
Installing Oracle Database 10g on SUSE Linux Enterprise Server 9 and on SUSE Linux Professional 9.1, 9.2, and 9.3
http://www.puschitz.com/InstallingOracle10gOnSUSE.shtml
Oracle Products on SUSE Linux Enterprise: Documents
http://www.novell.com/products/server/oracle/documents.html

Installation: Oracle 10g on SUSE Linux 10.1

Can this be? I sat for hours preparing my all new clean SUSE Linux 10.1 server for the installation of Oracle 10g (Standard Edition)... and when running the installer it simply tells me that SUSE 9 is needed...
I've found others here in the forum having experienced the same.
Maybe I just downloaded the wrong version of Oracle?
The main download page is at:
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
I selected entry "Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86" (the one directly below the Windows version):
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201linuxsoft.html
The size of the file^^ is 668,734,007 bytes.
Or should i have downloaded entry "Oracle Database 10g Release 2 (10.2.0.2) for z/Linux":
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10202zlinuxsoft.html
The size of the file^^ is 838,518,746 bytes.
By the way, all these versions on the main page should have some kind of description, something like "This is the Linux Version for most standard 32Bit single and multiprocessor Intel compatible servers."
Well, since I'm completely stuck now with SUSE 10.1, is there any way to make the Oracle installer go on that SUSE version? Maybe SUSE can pretend to be version 9... but how do I achieve something freaky as this?
Thanks for any help, comments, suggestions...
Karsten

BTW, I think it's bad practice by Oracle not supporting SUSE 10.1.Actually, I think it is good practise for Oracle not to certify the public beta versions of an operating system.
Please remember that Fedora and SuSE Linux are cycled every 6-8 months, making then truly unstable for commercial purposes. IN addition, they are often desupported by the comminuty within 2-3 years, forcing upgrades. And finally, Both Red Hat and SuSE/Novell publically state that these are 'proving grounds for new features' (meaning they are beta).
Certification means that Oracle will invest heavily and train people on the specific operating system and work with the operating system supplier, 24x7 if needed, to make sure that customers will continue in production. I am not aware that the SuSE Linux or Fedora supporters are willing to put in 24x7 support they way the Red Hat and SuSE Enterprise groups are.
This does not imply the public OSs are bad. It just means that Oracle (and I) believe they are unsuited for commercial, business mission critical, immediate support required, environments.
By the way, I have the combination of Oracle10g and SuSE Linux 10.1 working, and it works well. However, I did need to make sure that the libraries to which Oracle10g was compiled are available in the OS.
Or maybe Sybase does better.... ;-pNot if the [glibc] libraries are incompatible. Nor does PostgreSQL nor MySQL.

Oracle 10G Installation in Linux

Hi,
During the installation of Oracle 10G in Red Hat 5, we are facing the below issue.. Please give suggestion on this problem..
"Error in invoking target 'client_sharelib' of makefile /home/oracle/oracle/product/10.2.0/db_1/network/lib/ins_net_client.mk'. See '/home/oracle/oracleinventory/logs/installAction2010-08-31_06-41-10PM.log for details"
Thanks,
Suresh Bommalata.

install glibc-devel.rpm and also check required rpms.*
# From Enterprise Linux 5 Disk 1
cd /media/cdrom/Server
rpm -Uvh binutils-2.*
rpm -Uvh elfutils-libelf-0.*
rpm -Uvh glibc-2.*
rpm -Uvh glibc-common-2.*
rpm -Uvh libaio-0.*
rpm -Uvh libgcc-4.*
rpm -Uvh libstdc++-4.*
rpm -Uvh make-3.*
cd /
eject
# From Enterprise Linux 5 Disk 2
cd /media/cdrom/Server
rpm -Uvh compat-libstdc++-33*
rpm -Uvh elfutils-libelf-devel-*
rpm -Uvh glibc-headers*
rpm -Uvh glibc-devel-2.*
rpm -Uvh libgomp*
rpm -Uvh gcc-4.*
rpm -Uvh gcc-c++-4.*
rpm -Uvh libaio-devel-0.*
rpm -Uvh libstdc++-devel-4.*
rpm -Uvh unixODBC-2.*
rpm -Uvh unixODBC-devel-2.*
cd /
eject
# From Enterprise Linux 5 Disk 3
cd /media/cdrom/Server
rpm -Uvh sysstat-7.*
cd /
eject
also check and confirm,not installing Oracle 64-bit on 32-Bit OS ?
hope, this helps you,
Regards,
Rajesh

Problem with installing Oracle 10g on Suse Linux

Hi everybody!
I downloaded Oracle 10g Express from this url:
http://www.oracle.com/technology/software/products/database/xe/htdocs/102xelinsoft.html
it is free version for developers.
I copied it into computer where was installed Suse Linux Enterprise Edition.
But when I run it shows this kind of error:
error: rpmReadSignature failed: region failed: BAD, tag 15872 type 2047 offset 20480 count 4096
error: oracle-xe-univ-10.2.0.1-1.i386.rpm cannot be installed
It was downloaded without any problem. But checksum is different from that shown on website. I think this is the problem.
What is the problem? Does anybody know answer?
Regards,
Seti's fiction

Yes, you appear to have a bad copy.
I have not had a problem when the check sum matched. Therefore I encourage you to download again.

Error in Oracle 10g Installation windows 2000 advance server

Hi,
I am facing error message below when try 2 install oracle 10 in my work station . Already 8i and 9i with forms and reports was there in my machine. The follwing error display in log file.
Actual Result: 4
Check complete. The overall result of this check is: Passed
=======================================================================
Checking physical memory requirements ...
Expected result: 256MB
Actual Result: 503MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
After given an ip address and proceeded. This error message is displayed in trace file:
Shutting down instance: further logons disabled
Mon May 07 11:32:09 2007
Stopping background process CJQ0
Mon May 07 11:32:09 2007
Stopping background process MMNL
Mon May 07 11:32:10 2007
Stopping background process MMON
Mon May 07 11:32:11 2007
Shutting down instance (immediate)
License high water mark = 1
Mon May 07 11:32:11 2007
Stopping Job queue slave processes
Mon May 07 11:32:11 2007
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Mon May 07 11:32:16 2007
alter database close normal
ORA-1507 signalled during: alter database close normal...
The error message in udump trace file is as follows:
Dump file e:\or10g\product\10.2.0\admin\or10g\udump\or10g_ora_2340.trc
Mon May 07 11:26:03 2007
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Windows 2000 Version V5.0 Service Pack 4
CPU : 2 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:4M/503M, Ph+PgF:9M/1327M, VA:1740M/2047M
Instance name: or10g
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Windows thread id: 2340, image: ORACLE.EXE (SHAD)
opiino: Attach failed! error=-1 ifvp=00000000
There is no pfile or anything in admin directory. Kindly help me in installing 10G for testing please
efshafi

Solution : Install and Configure Microsoft LoopBack Adapter:
Installation of Microsoft LoopBack Adapter:
1. Click Start, and then click Control Panel.
2. Click on Add Hardware and then Click Next.
3. Click Install the hardware that I manually select from a list, and then click Next.
4. Click Network adapters, and then click Next.
5. In the Manufacturer box, click Microsoft.
6. In the Network Adapter box, click Microsoft Loopback Adapter, and then click Next.
7. Click Finish.
Configuration of Microsoft LoopBack Adapter:
1. Click Start, and then click Control Panel.
2. Click on Network and Sharing Center.
3. On the left side of the Window, Cick Manage Network Connections.
4. You will find a name like "Local Area Connection 4 Unidentified Network Microsoft Loopback Adapter".
5. Right Click on it and select Properties.
6. Then Click on Internet Protocol Version 4 (TCP/IPv4) and then again click Properties.
7. Click on Use the following IP address and enter 192.168.1.10 for the IP Address and 255.255.255.0 for the subnet mask.
8. Click OK.
After this you can continue with the installation of the Oracle 10g again.

Install Oracle 10g on Suse Linux Enterprise Server 10

Will 10g install on Suse Linux Enterprise Server 10? If so, what setting do I need to change to get it to install?

Yes, it will install. Oracle supports it.Apparently they forgot to tell support. Certify still holds at SLES 9.
http://www.oracle.com/technology/support/metalink/index.html
It's possible to make it work. However, I usually watch http://www.novell.com/products/server/oracle/matrix.html for info.

"dbstart" error in oracle 10g database in LINUX

Hi,
i have oracle 10g database in LINUXwhen i give "dbstart" command under oracle database bin folder, i get following error
"Failed to auto-start Oracle Net Listene using /ade/vikrkuma_new/oracle/bin/tnslsnr"
how can i fix this error.
i want to make oracle listener, database and EM db console as auto start during system start up.
i think if this dbstart command is not working, then i am not sure how else can i make them autostart
how can i acheive this.
Thanks in Advance,
Philip.

--- Posted: Oct 19, 2005 3:38 PM
lol, I believe he must have figured it out one way or another.

Oracle 10g Installation on Linux

Hi everybody !
myOS: Linux Mandrake 9.2/10 (the same error on both)
I was tried to install 10.1.0 but during installation was thrown this exception
something like this...
.../jlib/oemlt-10.1.0.jar too many parameters..
What is wrong ? How can I repair it ?
Next... I cannot run DBCA because of another exception...
[oracle@r2v21 bin]$ dbca
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/vbo/VboInsufficientInitException
at oracle.sysman.assistants.dbca.Dbca.getHost(Dbca.java:149)
at oracle.sysman.assistants.dbca.Dbca.execute(Dbca.java:91)
at oracle.sysman.assistants.dbca.Dbca.main(Dbca.java:169)
[oracle@r2v21 bin]$
Could you help me with these problems ??
thanks a lot !!

As a thumb of rule see this table:
====================================================================================
RAID Type of RAID Control Database Redo Log Archive Log
File File File File
====================================================================================
0 Striping Avoid* OK* Avoid* Avoid*
1 Shadowing OK OK Recommended Recommended
0+1 Striping + OK Recommended Avoid Avoid
Shadowing (1)
3 Striping with OK Avoid Avoid Avoid
Static Parity (2)
5 Striping with OK Avoid Avoid Avoid
Rotating Parity (2)
* RAID 0 does not provide any protection against failures. It requires a strong backup
strategy.
(1) RAID 0+1 is recommended for database files because this avoids hot spots and gives
the best possible performance during a disk failure. The disadvantage of RAID 0+1
is that it is a costly configuration.
(2) When heavy write operation involves this datafile
Not so easy to read, title is
control file,database file,redo log, archivelog
For RAID5:
control file ok
database file avoid (but see footnote 2)
redo log avoid
archive log avoid

Mount ocfs2 error in oracle 10g installation on vmware

Dear All this is very urgent.....kindly help me...
i m running this command for mount ocfs folder but not run gives error below.......
[root@rac1 ~]#mount -t ocfs2 -o datavolume,nointr /dev/sda1 /ocfs
ocfs2_hb_ctl: Bad magic number in superblock while reading uuid
mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted"
--------I have run this command for checking----------
$ mounted.ocfs2 -d
$ mounted.ocfs2 -f
$ cat /etc/ocfs2/cluster.conf
$ /etc/rc.d/init.d/ocfs2 status [ as root ]
---------the output is below--------------------------------
--------From node 1----------------------------------------------
[root@rac1 ~]# mounted.ocfs2 -d
Device FS UUID Label
[root@rac1 ~]# mounted.ocfs2 -f
Device FS Nodes
[root@rac1 ~]# cat /etc/ocfs2/cluster.conf
node:
ip_port = 7777
ip_address = 172.16.31.195
number = 0
name = rac1
cluster = ocfs2
node:
ip_port = 7777
ip_address = 172.16.31.197
number = 1
name = rac2
cluster = ocfs2
cluster:
node_count = 2
name = ocfs2
[root@rac1 ~]#
[root@rac1 ~]# /etc/rc.d/init.d/ocfs2 status
[root@rac1 ~]#
----------------------from node 2----------------------------------
output from node2
[root@rac2 ~]# su -
[root@rac2 ~]# mounted.ocfs2 -d
-bash: mounted.ocfs2: command not found
[root@rac2 ~]# mounted.ocfs2 -f
-bash: mounted.ocfs2: command not found
[root@rac2 ~]# cat /etc/ocfs2/cluster.conf
node:
ip_port = 7777
ip_address = 172.16.31.195
number = 0
name = rac1
cluster = ocfs2
node:
ip_port = 7777
ip_address = 172.16.31.197
number = 1
name = rac2
cluster = ocfs2
cluster:
node_count = 2
name = ocfs2
[root@rac2 ~]# /etc/rc.d/init.d/ocfs2 status
[root@rac2 ~]#
the both node is installed on VMWARE AND LINUX IS OEL4....THE CONFIGRATION OF vmx file below
------from first node vmx file configration----------------------
.encoding = "windows-1252"
config.version = "8"
virtualHW.version = "7"
scsi0.present = "TRUE"
scsi0.virtualDev = "lsilogic"
memsize = "1056"
ide0:0.present = "TRUE"
ide0:0.fileName = "D:\vmware\ractesting\rac1.vmdk"
ide1:0.present = "TRUE"
ide1:0.autodetect = "TRUE"
ide1:0.deviceType = "cdrom-image"
floppy0.startConnected = "FALSE"
floppy0.fileName = ""
floppy0.autodetect = "TRUE"
ethernet0.present = "TRUE"
ethernet0.wakeOnPcktRcv = "FALSE"
ethernet0.addressType = "generated"
usb.present = "TRUE"
ehci.present = "TRUE"
sound.present = "TRUE"
sound.fileName = "-1"
sound.autodetect = "TRUE"
serial0.present = "TRUE"
serial0.fileType = "thinprint"
pciBridge0.present = "TRUE"
pciBridge4.present = "TRUE"
pciBridge4.virtualDev = "pcieRootPort"
pciBridge4.functions = "8"
pciBridge5.present = "TRUE"
pciBridge5.virtualDev = "pcieRootPort"
pciBridge5.functions = "8"
pciBridge6.present = "TRUE"
pciBridge6.virtualDev = "pcieRootPort"
pciBridge6.functions = "8"
pciBridge7.present = "TRUE"
pciBridge7.virtualDev = "pcieRootPort"
pciBridge7.functions = "8"
vmci0.present = "TRUE"
roamingVM.exitBehavior = "go"
displayName = "rac1"
guestOS = "rhel4"
nvram = "rac1.nvram"
virtualHW.productCompatibility = "hosted"
printers.enabled = "TRUE"
extendedConfigFile = "rac1.vmxf"
disk.locking="FALSE"
disklib.dataCacheMaxSize="0"
scsi1.sharedBus="virtual"
scsi0:0.present = "TRUE"
scsi0:0.fileName = "D:\sharedstorage\ocfs2disk.vmdk"
scsi0:0.mode = "independent-persistent"
scsi0:0.deviceType="disk"
scsi0:1.present = "TRUE"
scsi0:1.fileName = "D:\sharedstorage\asmdisk1.vmdk"
scsi0:1.mode = "independent-persistent"
scsi0:1.deviceType="disk"
scsi0:2.present = "TRUE"
scsi0:2.fileName = "D:\sharedstorage\asmdisk2.vmdk"
scsi0:2.mode = "independent-persistent"
scsi0:2.deviceType="disk"
scsi0:3.present = "TRUE"
scsi0:3.fileName = "D:\sharedstorage\asmdisk3.vmdk"
scsi0:3.mode = "independent-persistent"
scsi0:3.deviceType="disk"
ethernet1.present = "TRUE"
ethernet1.connectionType = "hostonly"
ethernet1.wakeOnPcktRcv = "FALSE"
ethernet1.addressType = "generated"
ide1:0.fileName = "E:\OEL4\Enterprise-R4-U4-i386-disc4.iso"
ethernet0.generatedAddress = "00:0c:29:de:6c:7a"
ethernet1.generatedAddress = "00:0c:29:de:6c:84"
uuid.location = "56 4d a1 a0 2f 33 08 24-12 e5 7a 39 a7 de 6c 7a"
uuid.bios = "56 4d a1 a0 2f 33 08 24-12 e5 7a 39 a7 de 6c 7a"
cleanShutdown = "FALSE"
replay.supported = "FALSE"
replay.filename = ""
ide0:0.redo = ""
scsi0:0.redo = ""
scsi0:1.redo = ""
scsi0:2.redo = ""
scsi0:3.redo = ""
pciBridge0.pciSlotNumber = "17"
pciBridge4.pciSlotNumber = "21"
pciBridge5.pciSlotNumber = "22"
pciBridge6.pciSlotNumber = "23"
pciBridge7.pciSlotNumber = "24"
scsi0.pciSlotNumber = "16"
usb.pciSlotNumber = "32"
ethernet0.pciSlotNumber = "33"
ethernet1.pciSlotNumber = "34"
sound.pciSlotNumber = "35"
ehci.pciSlotNumber = "36"
vmci0.pciSlotNumber = "37"
vmotion.checkpointFBSize = "16777216"
ethernet0.generatedAddressOffset = "0"
ethernet1.generatedAddressOffset = "10"
vmci0.id = "-1478595462"
checkpoint.vmState = ""
tools.syncTime = "TRUE"
tools.remindInstall = "FALSE"
ide1:0.startConnected = "FALSE"
------and also paste vmx file configration from node2---------------------
.encoding = "windows-1252"
config.version = "8"
virtualHW.version = "7"
scsi0.present = "TRUE"
scsi0.virtualDev = "lsilogic"
memsize = "1056"
ide0:0.present = "TRUE"
ide0:0.fileName = "rac2.vmdk"
ide1:0.present = "TRUE"
ide1:0.autodetect = "TRUE"
ide1:0.deviceType = "cdrom-image"
floppy0.startConnected = "FALSE"
floppy0.fileName = ""
floppy0.autodetect = "TRUE"
ethernet0.present = "TRUE"
ethernet0.wakeOnPcktRcv = "FALSE"
ethernet0.addressType = "generated"
usb.present = "TRUE"
ehci.present = "TRUE"
sound.present = "TRUE"
sound.fileName = "-1"
sound.autodetect = "TRUE"
serial0.present = "TRUE"
serial0.fileType = "thinprint"
pciBridge0.present = "TRUE"
pciBridge4.present = "TRUE"
pciBridge4.virtualDev = "pcieRootPort"
pciBridge4.functions = "8"
pciBridge5.present = "TRUE"
pciBridge5.virtualDev = "pcieRootPort"
pciBridge5.functions = "8"
pciBridge6.present = "TRUE"
pciBridge6.virtualDev = "pcieRootPort"
pciBridge6.functions = "8"
pciBridge7.present = "TRUE"
pciBridge7.virtualDev = "pcieRootPort"
pciBridge7.functions = "8"
vmci0.present = "TRUE"
roamingVM.exitBehavior = "go"
displayName = "rac2"
guestOS = "rhel4"
nvram = "rac2.nvram"
virtualHW.productCompatibility = "hosted"
printers.enabled = "TRUE"
extendedConfigFile = "rac2.vmxf"
ethernet1.present = "TRUE"
ethernet1.connectionType = "hostonly"
ethernet1.wakeOnPcktRcv = "FALSE"
ethernet1.addressType = "generated"
disk.locking="FALSE"
disklib.dataCacheMaxSize="0"
scsi1.sharedBus="virtual"
scsi0:0.present = "TRUE"
scsi0:0.fileName = "D:\sharedstorage\ocfs2disk.vmdk"
scsi0:0.mode = "independent-persistent"
scsi0:0.deviceType="disk"
scsi0:1.present = "TRUE"
scsi0:1.fileName = "D:\sharedstorage\asmdisk1.vmdk"
scsi0:1.mode = "independent-persistent"
scsi0:1.deviceType="disk"
scsi0:2.present = "TRUE"
scsi0:2.fileName = "D:\sharedstorage\asmdisk2.vmdk"
scsi0:2.mode = "independent-persistent"
scsi0:2.deviceType="disk"
scsi0:3.present = "TRUE"
scsi0:3.fileName = "D:\sharedstorage\asmdisk3.vmdk"
scsi0:3.mode = "independent-persistent"
scsi0:3.deviceType="disk"
ide1:0.fileName = "E:\OEL4\Enterprise-R4-U4-i386-disc4.iso"
ide1:0.startConnected = "FALSE"
ethernet0.generatedAddress = "00:0c:29:dc:e1:c9"
ethernet1.generatedAddress = "00:0c:29:dc:e1:d3"
tools.syncTime = "TRUE"
uuid.location = "56 4d c6 2a 5b 77 ee e5-79 46 84 cd 2b dc e1 c9"
uuid.bios = "56 4d c6 2a 5b 77 ee e5-79 46 84 cd 2b dc e1 c9"
cleanShutdown = "FALSE"
replay.supported = "FALSE"
replay.filename = ""
ide0:0.redo = ""
scsi0:0.redo = ""
scsi0:1.redo = ""
scsi0:2.redo = ""
scsi0:3.redo = ""
pciBridge0.pciSlotNumber = "17"
pciBridge4.pciSlotNumber = "21"
pciBridge5.pciSlotNumber = "22"
pciBridge6.pciSlotNumber = "23"
pciBridge7.pciSlotNumber = "24"
scsi0.pciSlotNumber = "16"
usb.pciSlotNumber = "32"
ethernet0.pciSlotNumber = "33"
ethernet1.pciSlotNumber = "34"
sound.pciSlotNumber = "35"
ehci.pciSlotNumber = "36"
vmci0.pciSlotNumber = "37"
vmotion.checkpointFBSize = "16777216"
usb:1.present = "TRUE"
ethernet0.generatedAddressOffset = "0"
ethernet1.generatedAddressOffset = "10"
vmci0.id = "735896009"
usb:1.deviceType = "hub"

What's the output of "/etc/init.d/o2cb status"
Have you formatted the partition i.e. mkfs -t ocfs2 /dev/sdb1

Error during oracle 10g installation

HI
During oracle10g installlation on windows vista os
Enter prise manager configuration failed due to the error :starting starting database control refer to the log file at c:\product\10.2.0\db_1\cfgtoollogs\dbca\dbtest\emconfig.log
u can retry configuration this database with enterprise manager later by manually running c:\ora\product\10.2.0\db_1\bin\emca

Windows and Unix (in general) are different from the point of view that on windows platforms no relink operations are required, since the install media has the already compiled and linked executables and dll's required. On the unix like platforms, the story is different, relinking is required to create executables, since the install media has the object files. Makefiles are included to perform the relink operation and the relinking is nothing else but recreate executable images. If you were required to relink, probably it's because during install phase something went wrong and there were no relinked executables that made your working environment fail.
In this case, on the windows platform, this problem looks like a configuration issue.
~ Madrid

Oracle 10g Installation Problem on SUSE Linux 10

Hello Friends,
I want to install SAP Solution Manager 7.0 with Oracle 10g on SUSE Linux 10.0.
But, while starting the Installation i am getting following Errors.
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1,
asianux-2 or SuSE-10
                                      Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-04-22_03-59-38PM. Please wait ...
Error in writing to directory /tmp/OraInstall2009-04-22_03-59-38PM. Please ensure that this directory is
writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
I have checked the Permissions and the Size of /tmp Directory, which is as followed:
drwxr-xr-x 11 root root    0 2009-04-22 21:19 sys
drwxrwxrwt 52 root root 1824 2009-04-22 16:00 tmp
drwxr-xr-x 15 root root 408 2009-04-19 14:43 usr
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/sda10             2104376     73112   2031264   4% /tmp
I am starting the Oracle 10g Installation within orasm7 User which is a member of dba, users, disk groups.
The directories which are created upon starting the Oracle Installation in /tmp directory are having the situations as followed:
drwxr-xr-x 3 orasm7   dba          128 2009-04-21 18:41 OraInstall2009-04-21_06-41-14PM
drwxr-xr-x 3 orasm7   dba          128 2009-04-21 18:41 OraInstall2009-04-21_06-41-25PM
drwxr-xr-x 3 orasm7   dba          128 2009-04-22 15:59 OraInstall2009-04-22_03-59-38PM
The Oracle Installation log is as follwoed:
Using paramFile: /home/MyData/51031676/database/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
                                      Passed
All installer requirements met.
The commandline for unzip:
/home/MyData/51031676/database/install/unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.0.8
/1/DataFiles/\*.jar -d /tmp/OraInstall2009-04-22_03-59-38PM
I have set DISPLAY variable in this way before starting Installation:
DISPLAY=$HOSTNAME:0.0
export DISPLAY
I tried to search the solution over the internet for this kind of problem, but i am not able to find its solution. Even i tried to start the Orale installation using this parameter: ./runInstaller ignoreSysPrereqs, but still it is giving the same unexpected error.
I have a doubt on File/Directory permissions which are created for Installation in /tmp. The umask setiing of the system is 0022.
Please, help me for this issue.
Thanks & Regards,
Bhavik G. Shroff

Hi Markus,
How are you ?
Thank you very much for your reply.
I was executing wrong runInstaller file. RUNINSTALLER is right file for starting the execution. But still i am facing the same error, which is as followed.
Preparing response files. Please wait:
======================================
Working on /home/MyData/51031676/database/SAP/SVRCUSTOM.RSP
/home/MyData/51031676/database/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.27450: Done
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
                                      Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please wait ...
Error in writing to directory /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please ensure that
this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
SHROFF:~ # cd /home/orasm7/tmpora/
SHROFF:/home/orasm7/tmpora # ll
total 0
drwxr-xr-x 3 orasm7 dba 128 Apr 22 17:25 OraInstall2009-04-22_05-25-26PM
SHROFF:/home/orasm7/tmpora # cd OraInstall2009-04-22_05-25-26PM/
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM # ll
total 4
drwxr-xr-x 2 orasm7 dba 304 Apr 22 17:25 images
-rwxr-xr-x 1 orasm7 dba 504 Apr 22 17:25 installActions2009-04-22_05-25-26PM.log
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM #
I have a doubt on tmp_netca_file & tmp_dbca_file variable.
Please give your suggestion for the same.
Regards,
Bhavik G. Shroff
Edited by: Bhavik G. Shroff on Apr 22, 2009 2:10 PM

Following error occurs while oracle client 10g installation on Linux 5

Following error occurs while oracle client 10g installation on Linux 5
[oraclient@SVHJ0678 client]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-04-14_02-30-53AM. Please wait ...[oraclient@SVHJ0678 client]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-04-14_02-30-53AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)

user8862191 wrote:
Following error occurs while oracle client 10g installation on Linux 5
What is Linux 5? Do you mean Oracle Enterprise Linux (OEL) 5 ???
[oraclient@SVHJ0678 client]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-04-14_02-30-53AM. Please wait ...[oraclient@SVHJ0678 client]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-04-14_02-30-53AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)

Error While Installing ORACLE 10g in Redhat Linux 5.0

Hi all,
Anybody please guide me regarding the posted error.
I'm trying to install ORACLE 10g in Redhat Linux 5.0 and finding error as "Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-10-15_09-20-56PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
I tired a lot to sort it out but unable to resolve.So please tell me the possible ways.
I appreciate all types of clarifications...
Thanks in Advance
Sajeev George

Sajeevcmc wrote:
Hi,
Thanks for the reply.
Could you please tell me the rpm full name and where i can download the same?
Thanks in Advance
SAJEEV GEORGEYou need to have the following packages installed already before starting Oracle installation
http://download.oracle.com/docs/cd/B19306_01/install.102/b15669/pre_install.htm#sthref80
binutils-2.15.92.0.2-10.EL4
compat-db-4.1.25-9
control-center-2.8.0-12
gcc-3.4.3-9.EL4
gcc-c++-3.4.3-9.EL4
glibc-2.3.4-2
glibc-common-2.3.4-2
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.3-9.EL4
libstdc++-devel-3.4.3-9.EL4
make-3.80-5
pdksh-5.2.14-30
sysstat-5.0.5-1
xscreensaver-4.18-5.rhel4.2
And from the following link, you can get the same list:
http://www.puschitz.com/InstallingOracle10g.shtml (Go to Checking Software Packages (RPMs))
And from my installation guide you can easily install Oracle on Linux by following step by step instruction
[Step by Step Installing Oracle Database 10g Release 2 on Linux (CentOS) and AUTOMATE the installation using Linux Shell Script|http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

Error while Oracle 10g Installation suse linux

Similar Messages

Maybe you are looking for