'Error while parsing a Form, Type 3 Form, or Pattern'

This error message constantly appears when I'm reading a PDF, and turns pages of the PDF blank. Updates have not resolved the issue.
Does anyone know how to solve this problem? Urgent help is needed!!

Hi Mike,
I created the file in Pages '08. Is that what you mean? When I go with the document open, I go to file, print, and then change to color sync, and make file smaller and finally save as .pdf. I also tried exporting the file as a .pdf and the same problem occurred. I think perhaps I used a font that it did not like.???? Thanks for your help.
alex

Similar Messages

Error while opening the receipt entry form in AR module.

Error while opening the receipt entry form in AR module. We have created one new responsibility of Receivables for new operating unit . When we open the corresponding
forms , we are getting the error message as :
NO_DATA_FOUND
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-20002.
Kindly help in resolving.
We have ERP version of 11.5.10.2

Please also see the following docs.
Transactions Workbench Error: Listing of ORA Errors [ID 1336495.1]
FRM-40735 ERROR OPENING LIFE EVENT REASONS FORM BENLEVRS [ID 1517593.1]
APP-AR-96996: The Defined Sales Representatives Have Incorrect Id'S [ID 437107.1]
ARXSUDRC Receipt Classes Errors With APP-AR-96994: Please Define Sales Representatives [ID 357454.1]
Thanks,
Hussein

Error while parsing or executing XML-SQL document

friends,
my scenario is based on file to jdbc.i am facing an error in receiver CC in RWB.
The error states that '
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'MATMAS' (structure 'STATEMENT'): java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]String or binary data would be truncated.'
My SOAP xml message is
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
- <SOAP:Header>
- <sap:Main xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3" versionMinor="0" SOAP:mustUnderstand="1" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<sap:MessageClass>ApplicationMessage</sap:MessageClass>
<sap:ProcessingMode>asynchronous</sap:ProcessingMode>
<sap:MessageId>18f17dd0-d503-11dc-cb4d-001635b02bfd</sap:MessageId>
<sap:TimeSent>2008-02-06T22:30:21Z</sap:TimeSent>
- <sap:Sender>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty" />
<sap:Service>ECC</sap:Service>
</sap:Sender>
- <sap:Receiver>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty" />
<sap:Service>BS_JDBC</sap:Service>
</sap:Receiver>
<sap:Interface namespace="http://file_to_jdbc">MI_JDBC_RECEIVER</sap:Interface>
</sap:Main>
- <sap:ReliableMessaging xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
<sap:QualityOfService>ExactlyOnce</sap:QualityOfService>
</sap:ReliableMessaging>
- <sap:DynamicConfiguration xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="Directory">
sapecc50\sapmnt\trans</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="FileEncoding">UTF-8</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="FileType">txt</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">matmas1.txt</sap:Record>
</sap:DynamicConfiguration>
- <sap:HopList xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
- <sap:Hop timeStamp="2008-02-06T22:30:21Z" wasRead="false">
<sap:Engine type="AE">af.e6e.sapecc6eval</sap:Engine>
<sap:Adapter namespace="http://sap.com/xi/XI/System">XIRA</sap:Adapter>
<sap:MessageId>18f17dd0-d503-11dc-cb4d-001635b02bfd</sap:MessageId>
<sap:Info />
</sap:Hop>
- <sap:Hop timeStamp="2008-02-06T22:30:21Z" wasRead="false">
<sap:Engine type="IS">is.01.sapecc6eval</sap:Engine>
<sap:Adapter namespace="http://sap.com/xi/XI/System">XI</sap:Adapter>
<sap:MessageId>18f17dd0-d503-11dc-cb4d-001635b02bfd</sap:MessageId>
<sap:Info>3.0</sap:Info>
</sap:Hop>
- <sap:Hop timeStamp="2008-02-06T22:30:22Z" wasRead="false">
<sap:Engine type="AE">af.e6e.sapecc6eval</sap:Engine>
<sap:Adapter namespace="http://sap.com/xi/XI/System">XIRA</sap:Adapter>
<sap:MessageId>18f17dd0-d503-11dc-cb4d-001635b02bfd</sap:MessageId>
</sap:Hop>
</sap:HopList>
- <sap:Diagnostic xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
<sap:TraceLevel>Information</sap:TraceLevel>
<sap:Logging>Off</sap:Logging>
</sap:Diagnostic>
</SOAP:Header>
- <SOAP:Body>
- <sap:Manifest xmlns:sap="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7">
- <sap:Payload xlink:type="simple" xlink:href="cid:[email protected]">
<sap:Name>MainDocument</sap:Name>
<sap:Description />
<sap:Type>Application</sap:Type>
</sap:Payload>
</sap:Manifest>
</SOAP:Body>
</SOAP:Envelope>
and payload message is
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_JDBC_RECEIVER xmlns:ns0="http://file_to_jdbc">
- <STATEMENT>
- <ROW action="INSERT">
<TABLE>MATMAS</TABLE>
- <access>
<MATNR>38</MATNR>
<MTART>HALB</MTART>
<MATKL>00107</MATKL>
<MEINS>pc</MEINS>
<ERSDA>2008.04.05</ERSDA>
<BRGEW>10</BRGEW>
<NTGEW>12</NTGEW>
<GEWEI>KG</GEWEI>
</access>
- <access>
<MATNR>88</MATNR>
<MTART>FERT</MTART>
<MATKL>02004</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2008.04.05</ERSDA>
<BRGEW>12</BRGEW>
<NTGEW>13</NTGEW>
<GEWEI>KG</GEWEI>
</access>
- <access>
<MATNR>89</MATNR>
<MTART>FERT</MTART>
<MATKL>02004</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2008.03.02</ERSDA>
<BRGEW>12</BRGEW>
<NTGEW>14</NTGEW>
<GEWEI>KG</GEWEI>
</access>
- <access>
<MATNR>98</MATNR>
<MTART>HALB</MTART>
<MATKL>2</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2006.09.01</ERSDA>
<BRGEW>12</BRGEW>
<NTGEW>12</NTGEW>
<GEWEI>KG</GEWEI>
</access>
- <access>
<MATNR>170</MATNR>
<MTART>NLAG</MTART>
<MATKL>4</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2005.03.02</ERSDA>
<BRGEW>2</BRGEW>
<NTGEW>3</NTGEW>
<GEWEI>KG</GEWEI>
</access>
- <access>
<MATNR>178</MATNR>
<MTART>NLAG</MTART>
<MATKL>4</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2007.03.06</ERSDA>
<BRGEW>3</BRGEW>
<NTGEW>4</NTGEW>
<GEWEI>KG</GEWEI>
</access>
- <access>
<MATNR>188</MATNR>
<MTART>NLAG</MTART>
<MATKL>5</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2007.05.02</ERSDA>
<BRGEW>2</BRGEW>
<NTGEW>3</NTGEW>
<GEWEI>KG</GEWEI>
</access>
- <access>
<MATNR>288</MATNR>
<MTART>HALB</MTART>
<MATKL>101</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2006.02.11</ERSDA>
<BRGEW>5</BRGEW>
<NTGEW>4</NTGEW>
<GEWEI>KG</GEWEI>
</access>
- <access>
<MATNR>358</MATNR>
<MTART>HAWA</MTART>
<MATKL>2</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2007.09.09</ERSDA>
<BRGEW>500</BRGEW>
<NTGEW>500</NTGEW>
<GEWEI>G</GEWEI>
</access>
- <access>
<MATNR>359</MATNR>
<MTART>HAWA</MTART>
<MATKL>2</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2007.08.01</ERSDA>
<BRGEW>20</BRGEW>
<NTGEW>10</NTGEW>
<GEWEI>G</GEWEI>
</access>
</ROW>
</STATEMENT>
</ns0:MT_JDBC_RECEIVER>
Could anybody help me in sorting out this issue.My advance thanks

hi,
ypur structure is bad defined.
if you want to do an insert, the DT should be
<ns0:MT_JDBC_RECEIVER xmlns:ns0="http://file_to_jdbc">
___<StatementName>
______<dbTableName action=INSERT>
_____<table>MATMAS</table>
_______ <access>
___________<MATNR>38</MATNR>
___________<MTART>HALB</MTART>
___________<MATKL>00107</MATKL>
___________<MEINS>pc</MEINS>
___________<ERSDA>2008.04.05</ERSDA>
___________<BRGEW>10</BRGEW>
___________<NTGEW>12</NTGEW>
___________<GEWEI>KG</GEWEI>
______</access>
_____</dbTableName>
__ </StatementName>
</ns0:MT_JDBC_RECEIVER>
the ROW field is used when you wait receive data from DB for example you execute and SQL Query from Sender communication channel "SELECT name FROM TABLE Names"
so, the result of this query would be, for example:
<row>
____<name>joge</name>
</row>
<row>
____<name>pepe</name>
</row>
<row>
____<name>nicola</name>
</row>
See this link
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/frameset.htm
Thanks
Rodrigo
Edited by: Rodrigo Pertierra on Feb 8, 2008 8:40 AM
Edited by: Rodrigo Pertierra on Feb 8, 2008 8:42 AM

Error while parsing or executing XML-SQL document attribute "action" missin

Hi All,
I am doing a scenario for IDOC to JDBC, When I push IDOC from R/3 , IDOC sent to XI System successfully,
I have also checked in SXMB_MONI it is showing the successful staus without any errors, and I have also copied the xml structure from main document of payloads and tested the mapping in Integration Designer, and it is showing successfull message.
here is the xml structure from payloads of Request Message Mapping ........
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:RTACOGRP_RECEIVER_MT xmlns:ns0="http://prospecta.com/wsorta/cosmas/idoc2jdbc">
- <COGRP_TMP_PROC action="EXECUTE">
<IDOCNUMBER isInput="TRUE" type="CHAR">1000001</IDOCNUMBER>
<E1COGH_NUMBER isInput="TRUE" type="CHAR">1</E1COGH_NUMBER>
<E1COGH_HIGHERSEGMENT isInput="TRUE" type="CHAR">1</E1COGH_HIGHERSEGMENT>
<E1COGH_MSGFN isInput="TRUE" type="CHAR">1</E1COGH_MSGFN>
<E1COGH_GROUPTYPE isInput="TRUE" type="CHAR">1</E1COGH_GROUPTYPE>
<E1COGH_GROUPNAME isInput="TRUE" type="CHAR">1</E1COGH_GROUPNAME>
<E1COGH_KOKRS isInput="TRUE" type="CHAR">1</E1COGH_KOKRS>
<E1COGHT_NUMBER isInput="TRUE" type="CHAR">1</E1COGHT_NUMBER>
<E1COGHT_HIGHERSEGMENT isInput="TRUE" type="CHAR">2</E1COGHT_HIGHERSEGMENT>
<E1COGHT_LANGU isInput="TRUE" type="CHAR">2</E1COGHT_LANGU>
<E1COGHT_DESCRIPT isInput="TRUE" type="CHAR">2</E1COGHT_DESCRIPT>
<E1COGHT_LANGU_ISO isInput="TRUE" type="CHAR">2</E1COGHT_LANGU_ISO>
<E1COGV_NUMBER isInput="TRUE" type="CHAR">1</E1COGV_NUMBER>
<E1COGV_HIGHERSEGMENT isInput="TRUE" type="CHAR">3</E1COGV_HIGHERSEGMENT>
<E1COGV_FROMVALUE isInput="TRUE" type="CHAR">6</E1COGV_FROMVALUE>
<E1COGV_TOVALUE isInput="TRUE" type="CHAR">6</E1COGV_TOVALUE>
<E1COGS_NUMBER isInput="TRUE" type="CHAR">1</E1COGS_NUMBER>
<E1COGS_HIGHERSEGMENT isInput="TRUE" type="CHAR">5</E1COGS_HIGHERSEGMENT>
<E1COGS_SUBGROUP isInput="TRUE" type="CHAR">4</E1COGS_SUBGROUP>
<E1COGHR_NUMBER isInput="TRUE" type="CHAR">1</E1COGHR_NUMBER>
<E1COGHR_HIGHERSEGMENT isInput="TRUE" type="CHAR">6</E1COGHR_HIGHERSEGMENT>
<E1COGHR_SNAME isInput="TRUE" type="CHAR">3</E1COGHR_SNAME>
<E1COGHR_PRTCLASS isInput="TRUE" type="CHAR">3</E1COGHR_PRTCLASS>
<E1COGHR_AUTHGR isInput="TRUE" type="CHAR">3</E1COGHR_AUTHGR>
<E1COGSR_NUMBER isInput="TRUE" type="CHAR">1</E1COGSR_NUMBER>
<E1COGSR_HIGHERSEGMENT isInput="TRUE" type="CHAR">7</E1COGSR_HIGHERSEGMENT>
<E1COGSR_XSUPPRESS isInput="TRUE" type="CHAR">5</E1COGSR_XSUPPRESS>
<E1COGSR_PRTCLASS isInput="TRUE" type="CHAR">5</E1COGSR_PRTCLASS>
<E1COGSR_LNAME isInput="TRUE" type="CHAR">5</E1COGSR_LNAME>
<E1COGVT_NUMBER isInput="TRUE" type="CHAR">1</E1COGVT_NUMBER>
<E1COGVT_HIGHERSEGMENT isInput="TRUE" type="CHAR">9</E1COGVT_HIGHERSEGMENT>
<E1COGVT_LANGU isInput="TRUE" type="CHAR">7</E1COGVT_LANGU>
<E1COGVT_DESCRIPT isInput="TRUE" type="CHAR">7</E1COGVT_DESCRIPT>
<E1COGVT_LANGU_ISO isInput="TRUE" type="CHAR">7</E1COGVT_LANGU_ISO>
<E1COGVR_NUMBER isInput="TRUE" type="CHAR">1</E1COGVR_NUMBER>
<E1COGVR_HIGHERSEGMENT isInput="TRUE" type="CHAR">12</E1COGVR_HIGHERSEGMENT>
<E1COGVR_XSUPPRESS isInput="TRUE" type="CHAR">8</E1COGVR_XSUPPRESS>
<E1COGVR_PRTCLASS isInput="TRUE" type="CHAR">8</E1COGVR_PRTCLASS>
<E1COGVR_LNAME isInput="TRUE" type="CHAR">8</E1COGVR_LNAME>
</COGRP_TMP_PROC>
</ns0:RTACOGRP_RECEIVER_MT>
When I checked for component monitoring in runtime workbench....
these are the messages........
<i>Error while parsing or executing XML-SQL document: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)</i>
Here are the messages from message monitoring ......
2007-06-07 12:42:17 Success Receiver JDBC adapter: processing started; QoS required: ExactlyOnce
2007-06-07 12:42:17 Success JDBC adapter receiver channel RTACOGRP_COM_Chan: processing started; party , service WSORTABS
2007-06-07 12:42:17 Error No "action" attribute found in XML document ("action" attribute missing or wrong XML structure)
2007-06-07 12:42:17 Error MP: exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)
2007-06-07 12:42:17 Error Exception caught by adapter framework: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)
2007-06-07 12:42:17 Error Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure).
2007-06-07 12:42:17 Error The message status set to NDLV.
Can any body please resolve the problem.....
Thanks in Advance
Murthy

Bhavesh,
Now I have changed the data structure , and the resultant structure is like this...
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:RTACOGRP_RECEIVER_MT xmlns:ns0="http://prospecta.com/wsorta/cosmas/idoc2jdbc">
- <Statement>
- <COGRP_TMP_PROC action="EXECUTE">
<IDOCNUMBER isInput="TRUE" type="CHAR">100002223</IDOCNUMBER>
<E1COGH_NUMBER isInput="TRUE" type="CHAR">1</E1COGH_NUMBER>
<E1COGH_HIGHERSEGMENT isInput="TRUE" type="CHAR">1</E1COGH_HIGHERSEGMENT>
<E1COGH_MSGFN isInput="TRUE" type="CHAR">H</E1COGH_MSGFN>
<E1COGH_GROUPTYPE isInput="TRUE" type="CHAR">H</E1COGH_GROUPTYPE>
<E1COGH_GROUPNAME isInput="TRUE" type="CHAR">H</E1COGH_GROUPNAME>
<E1COGH_KOKRS isInput="TRUE" type="CHAR">H</E1COGH_KOKRS>
<E1COGHT_NUMBER isInput="TRUE" type="CHAR">1</E1COGHT_NUMBER>
<E1COGHT_HIGHERSEGMENT isInput="TRUE" type="CHAR">2</E1COGHT_HIGHERSEGMENT>
<E1COGHT_LANGU isInput="TRUE" type="CHAR">T</E1COGHT_LANGU>
<E1COGHT_DESCRIPT isInput="TRUE" type="CHAR">T</E1COGHT_DESCRIPT>
<E1COGHT_LANGU_ISO isInput="TRUE" type="CHAR">T</E1COGHT_LANGU_ISO>
<E1COGV_NUMBER isInput="TRUE" type="CHAR">1</E1COGV_NUMBER>
<E1COGV_HIGHERSEGMENT isInput="TRUE" type="CHAR">3</E1COGV_HIGHERSEGMENT>
<E1COGV_FROMVALUE isInput="TRUE" type="CHAR">V</E1COGV_FROMVALUE>
<E1COGV_TOVALUE isInput="TRUE" type="CHAR">V</E1COGV_TOVALUE>
<E1COGS_NUMBER isInput="TRUE" type="CHAR">1</E1COGS_NUMBER>
<E1COGS_HIGHERSEGMENT isInput="TRUE" type="CHAR">5</E1COGS_HIGHERSEGMENT>
<E1COGS_SUBGROUP isInput="TRUE" type="CHAR">S</E1COGS_SUBGROUP>
<E1COGHR_NUMBER isInput="TRUE" type="CHAR">1</E1COGHR_NUMBER>
<E1COGHR_HIGHERSEGMENT isInput="TRUE" type="CHAR">7</E1COGHR_HIGHERSEGMENT>
<E1COGHR_SNAME isInput="TRUE" type="CHAR">R</E1COGHR_SNAME>
<E1COGHR_PRTCLASS isInput="TRUE" type="CHAR">R</E1COGHR_PRTCLASS>
<E1COGHR_AUTHGR isInput="TRUE" type="CHAR">R</E1COGHR_AUTHGR>
<E1COGSR_NUMBER isInput="TRUE" type="CHAR">1</E1COGSR_NUMBER>
<E1COGSR_HIGHERSEGMENT isInput="TRUE" type="CHAR">8</E1COGSR_HIGHERSEGMENT>
<E1COGSR_XSUPPRESS isInput="TRUE" type="CHAR">S</E1COGSR_XSUPPRESS>
<E1COGSR_PRTCLASS isInput="TRUE" type="CHAR">S</E1COGSR_PRTCLASS>
<E1COGSR_LNAME isInput="TRUE" type="CHAR">S</E1COGSR_LNAME>
<E1COGVT_NUMBER isInput="TRUE" type="CHAR">1</E1COGVT_NUMBER>
<E1COGVT_HIGHERSEGMENT isInput="TRUE" type="CHAR">10</E1COGVT_HIGHERSEGMENT>
<E1COGVT_LANGU isInput="TRUE" type="CHAR">T</E1COGVT_LANGU>
<E1COGVT_DESCRIPT isInput="TRUE" type="CHAR">T</E1COGVT_DESCRIPT>
<E1COGVT_LANGU_ISO isInput="TRUE" type="CHAR">T</E1COGVT_LANGU_ISO>
<E1COGVR_NUMBER isInput="TRUE" type="CHAR">1</E1COGVR_NUMBER>
<E1COGVR_HIGHERSEGMENT isInput="TRUE" type="CHAR">11</E1COGVR_HIGHERSEGMENT>
<E1COGVR_XSUPPRESS isInput="TRUE" type="CHAR">E</E1COGVR_XSUPPRESS>
<E1COGVR_PRTCLASS isInput="TRUE" type="CHAR">E</E1COGVR_PRTCLASS>
<E1COGVR_LNAME isInput="TRUE" type="CHAR">E</E1COGVR_LNAME>
</COGRP_TMP_PROC>
</Statement>
</ns0:RTACOGRP_RECEIVER_MT>
Now in message monitoring error is showing like this...
<i>Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC' (structure 'Statement'): java.sql.SQLException: General error</i>
Now in Component Monitoring error is showing like this....
<i>Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC' (structure 'Statement'): java.sql.SQLException: General error</i>
I have tested the stored procedure in sql by giving the same values , it was successfully executed..
Can you please tell me where is the error still in structure ...
Thanks in Advance,
Murthy.

XML validation error while parsing MXI Manifest

Hi,
I have created an hybrid extension for Photoshop. I want to upload my extension on Adobe Exchange. during the upload process I get an error,
"XML validation error while parsing MXI Manifest: Declarations can only occur in the doctype declaration. Line: 19 Position: 791 Last 80 unconsumed characters".
The error description specifies that description in MXI file is not valid. Below are the contents of my MXI file.
<macromedia-extension
           name="yyy"
           id="com.yyy"
           version="1.0.0"
           type="object"
           requires-restart="true">
          <author name="abcd" />
          <products>
          <product familyname="Photoshop" maxversion="" primary="true" version="12.0"/>
          </products>
<description>
          <![CDATA[
<p><font size="14" color="black"><b>abcd</b> qwertyuioipafgjhkjljljklkjl
<br><br>
Open Extension via: Photoshop top menu > Window > Extensions > abcd.
<br><br>
Online support at: <a href="http://www.abcd.com/help.php">http://www.abcd.com/help.php</a></font></p>
<br>]]>
</description>
<ui-access>
          </ui-access>
<license-agreement>
</license-agreement>
<files>
            <file destination="$ExtensionSpecificEMStore/com.abcd/html/abcd.html" products="" source="zxp-support/Description/abcd.html"/>
            <file destination="$ExtensionSpecificEMStore/com.abcd/html/abcd.png" products="" source="zxp-support/Description/abcd.png"/>
            <file destination="" file-type="CSXS" products="" source="abcd.zxp"/>
            <file destination="$automate" file-type="plugin" platform="mac" products="Photoshop" source="mac/abcd.plugin"/>
            <file destination="$automate" file-type="plugin" platform="win" products="Photoshop32" source="win32/abcd.8li"/>
            <file destination="$automate" file-type="plugin" platform="win" products="Photoshop64" source="win64/abcd.8li"/>
</files>
</macromedia-extension>
Can anyone please point out why am I getting the error?
Thanks

Hi CarlSun,
Thanks for the reply. I have made the changes suggested by you.
I have few queries:
1. Can we use attribute "source" in the description tag?
     I have created a local html page and specified it in source attribute. but the Extension Manager CS6 did not render the local html page and displayed      the following:
     No description avaliable. Click the following link for more details.
     "http://www.abcd.html". Is it possible to display a local html page in Extension Manager CS6?
2. Can I display an image (png) in CDATA under description tag? If yes, then can you please guide me how can I do so?
3. As suggested in tech notes MXI file must include UTF-8 encoding as header (<?xml version="1.0" encoding="UTF-8"?>). The MXI I am using does      not have this header. Do I need to include the header?
Thanks

NetInstall : Error while processing a command type "WriteSettings" in plug-in "servermgr_netboot"

Hi guys,
I have this error : Error while processing a command type "WriteSettings" in plug-in "servermgr_netboot"
This happens when I select an image as default in NetInstall, OS X Server 2.1.1
It happened also in version 2.1
Otherwise, NetInstall is working fine when I connect from an other mac through my network.
Every other services work fine too.
Does someone else have this issue ?
Thanx for you help

Hi guys,
I have this error : Error while processing a command type "WriteSettings" in plug-in "servermgr_netboot"
This happens when I select an image as default in NetInstall, OS X Server 2.1.1
It happened also in version 2.1
Otherwise, NetInstall is working fine when I connect from an other mac through my network.
Every other services work fine too.
Does someone else have this issue ?
Thanx for you help

Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /

Guyz,
Firstly despite the plant+storage location + warehouse no. assignments are done , my replenishment delivery (delivery for stock transport order between plants under same company code) is not picking up storage location and warehouse no and thus stopping me from doing picking and PGI (post goods issue).
However in VL02N when i'm trying to change storage location for line item, i'm getting following weird error
*Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /*
I found a SAP Note(133223) regarding this error and VL02 transaction but that note was specific to older versions. I'm on ECC 6.0
Any suggestions please ?
Thanks

Warehouse managment has its own movement types, most identical to inventory management movement types.
These WM movement types are determined via reference movement types.
the error you have just looks like your customizing is not complete.
IMG > LE > WM > Interfaces > IM > define movement types.

Getting the following error while parsing the values usng xml parser

Hi
I am getting the following error while parsing the values using the code in r12 instance on linux
declare
XML_PARSER XMLPARSER.PARSER;
DOC XMLDOM.DOMDOCUMENT;
DOCELEMENT DBMS_XMLDOM.DOMELEMENT;
BEGIN
-- NEW PARSER
XML_PARSER := XMLPARSER.NEWPARSER;
-- SET SOME CHARACTERISTICS
XMLPARSER.SETVALIDATIONMODE(XML_PARSER, FALSE);
     IF P_DIR IS NOT NULL AND P_FILENAME IS NOT NULL
     THEN
     FND_FILE.PUT_LINE(FND_FILE.LOG,'DIRECTORY FOUND'||'-'||P_DIR);
     XMLPARSER.SETBASEDIR(XML_PARSER, P_DIR);
     -- PARSE INPUT FILE
     FND_FILE.PUT_LINE(FND_FILE.LOG,'FILE FOUND'||'-'||P_FILENAME);
     XMLPARSER.PARSE(XML_PARSER, P_DIR || '/' || P_FILENAME);
     -- GET DOCUMENT
     DOC := XMLPARSER.GETDOCUMENT(XML_PARSER);
     LOAD_SUPP(doc);
     ELSE
     DBMS_OUTPUT.PUT_LINE('DIRACTORY/FILENAME CANNOT BE NULL');
     END IF;
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('DATA NOTINSERTED'||sqlerrm);
     ROLLBACK;
END
I am getting the following error
DIRACTORYL-/home/appldevORA-0000: normal, successful completion
FILE NAME-suppliersample_data.xmlORA-0000: normal, successful completion
DATA NOTINSERTEDORA-31001: Invalid resource handle or path name "/home/appldev/suppliersample_data.xml"
ORA-06512: at "SYS.XDBURITYPE", line 11
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 142
ORA-29280: invalid directory path
ORA-29280: invalid directory path
ORA-29280: invalid directory path
It could be great if some one could give a suggestion/solution.
Thanks
Ajesh

Besides this is not the correct forum try to google the error message first before posting:
http://ora-29280.ora-code.com/
cheers

IMAP error messages "Error while parsing IMAP response"

I'm getting thousands of IMAP errors every hour, can I shut those off?
My console log is flooded with them and it keeps me from seeing anything else
in the system log. The IMAP errors happen continuously while Mail.app is running.
It looks like debug output from Mail.app !?!
IMAP server is Beehive Server -- it's my company email so I need to use it.
Windows Outlook (Windows 7) shows no errors, possibly they're silently ignored
on Windows. My disk is writing almost continuously when Mail.appo is running.
Sample error: (thousands are generated per hour)
Apr 8 10:29:18 Js-Coolio-iMac.local Mail[22903]: Error while parsing IMAP response (null): Incomplete response
          Remaining text: <    Gian Luigi<br>>
          Full text: <    Gian Luigi<br>>
Any idea how to shut these off? I reinstalled Mavericks, no improvement as expected
since this seems to be Mail complaining about IMAP protocol issues.
Thanks in advance for any suggestions. And yes I've rebooted, reinstalled the IMAP account,
reinstalled Mavericks, etc.
Entrecheck follows...
Hardware Information:
          iMac (27-inch, Late 2009)
          iMac - model: iMac11,1
          1 2.8 GHz Intel Core i7 CPU: 4 cores
          12 GB RAM
Video Information:
          ATI Radeon HD 4850 - VRAM: 512 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 9 days 20:39:45
Disk Information:
          ST31000528ASQ disk0 : (1 TB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 999.35 GB (801.18 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          OPTIARC DVD RW AD-5680H
USB Information:
          Seagate Backup+ Desk 3 TB
                    disk1s1 (disk1s1) <not mounted>: 209.7 MB
                    JOHN TM (disk1s2) /Volumes/JOHN TM: 2 TB (1.81 TB free)
                    LIU TM (disk1s3) /Volumes/LIU TM: 500 GB (203.45 GB free)
                    Untitled 3 (disk1s4) /Volumes/Untitled 3: 499.39 GB (498.94 GB free)
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Internal Memory Card Reader
          Griffin Technology, Inc iMic USB audio system
          Apple, Inc. Keyboard Hub
                    Logitech USB Trackball
                    Apple, Inc Apple Keyboard
          Apple Computer, Inc. IR Receiver
          Apple Inc. Built-in iSight
FireWire Information:
Thunderbolt Information:
Configuration files:
          /etc/hosts - Count: 4
Kernel Extensions:
          com.seagate.driver.PowSecDriverCore          (5.2.4 - SDK 10.4)
          com.seagate.driver.PowSecLeafDriver_10_5          (5.2.4 - SDK 10.5)
Launch Daemons:
          [System]          com.adobe.fpsaud.plist 3rd-Party support link
          [System]          com.barebones.textwrangler.plist 3rd-Party support link
          [System]          com.oracle.java.Helper-Tool.plist 3rd-Party support link
Launch Agents:
          [System]          com.oracle.java.Java-Updater.plist 3rd-Party support link
          [System]          net.culater.SIMBL.Agent.plist 3rd-Party support link
User Launch Agents:
          [not loaded]          com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded]          com.google.keystone.agent.plist 3rd-Party support link
          [not loaded]          com.leadertech.PowerRegister.SEA1.7c77b2ab072a21a06107fccae868ff4b.plist 3rd-Party support link
          [not loaded]          com.valvesoftware.steamclean.plist 3rd-Party support link
User Login Items:
          Flux
          smcFanControl
          SpeechSynthesisServer
          AdobeResourceSynchronizer
          Flux (13.0)
Internet Plug-ins:
          Default Browser: Version: 537 - SDK 10.9
          Flip4Mac WMV Plugin: Version: 3.1.0.24   - SDK 10.8 3rd-Party support link
          AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 3rd-Party support link
          RealPlayer Plugin: Version: (null) 3rd-Party support link
          AdobePDFViewerNPAPI: Version: 10.1.3 3rd-Party support link
          FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          MRJPlugin: Version: 1.0-JEP-0.9.0 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          iPhotoPhotocast: Version: 7.0
          AdobePDFViewer: Version: 10.1.3 3rd-Party support link
          JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Safari Extensions:
          Ghostery: Version: 5.1.0
          AdBlock: Version: 2.6.18
          Turn Off the Lights: Version: 2.3.0.5
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
          WebEx: Version: 1.0 3rd-Party support link
          WebEx64: Version: 1.0 - SDK 10.5 3rd-Party support link
          Google Earth Web Plug-in: Version: 7.1 3rd-Party support link
3rd Party Preference Panes:
          RCDefaultApp
          Flash Player 3rd-Party support link
          Flip4Mac WMV 3rd-Party support link
          Java 3rd-Party support link
          MenuMeters 3rd-Party support link
Old Applications:
          asannotation2:          Version: 10.21.26.0 - SDK 10.5 3rd-Party support link
                    /Users/[redacted]/Library/Application Support/WebEx Folder/924/asannotation2.app
          convertpdf:          Version: 1.2 - SDK 10.5 3rd-Party support link
                    /Users/[redacted]/Library/Application Support/WebEx Folder/1224/convertpdf/convertpdf.app
          Neverwinter Nights 2:          Version: 1.23.1765 - SDK 10.5 3rd-Party support link
          Amazon MP3 Downloader:          Version: INFO_PLIST_VERSION - SDK 10.4 3rd-Party support link
          TurboTax Deluxe 2011:          Version: 2011.r17.007 - SDK 10.4 3rd-Party support link
          Ventrilo:          Version: 3.0.13 - SDK 10.5 3rd-Party support link
          /Users/[redacted]/Library/Application Support/WebEx Folder/1224
                    Cisco WebEx Meeting Center:          Version: 1207.04.2732.10 - SDK 10.5 3rd-Party support link
                    asannotation2:          Version: 8.25.31.0 - SDK 10.5 3rd-Party support link
                    atmsupload:          Version: 4.14.29.0 - SDK 10.5 3rd-Party support link
                    convertpdf:          Version: 1.2 - SDK 10.5 3rd-Party support link
Time Machine:
          Skip System Files: NO
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 930.71 GB Disk used: 184.55 GB
          Destinations:
                    JOHN TM [Local] (Last used)
                    Total size: 2
                    Total number of backups: 51
                    Oldest backup: 2014-01-09 05:11:53 +0000
                    Last backup: 2014-04-04 08:40:29 +0000
                    Size of backup disk: Adequate
                              Backup size 2 > (Disk used 184.55 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               2%          WindowServer
               1%          EtreCheck
               0%          SystemUIServer
               0%          com.apple.WebKit.Networking
               0%          softwareupdated
Top Processes by Memory:
          344 MB          Safari
          258 MB          mds_stores
          258 MB          com.apple.IconServicesAgent
          172 MB          softwareupdated
          172 MB          soffice
Virtual Memory Information:
          3.05 GB          Free RAM
          5.12 GB          Active RAM
          2.71 GB          Inactive RAM
          1.05 GB          Wired RAM
          7.04 GB          Page-ins
          15 MB          Page-outs

try Mail is not syncing an imap account correctly
(https://discussions.apple.com/message/21904088#21904088) , it just worked for me.

Error while updating to target type INFOCUBE

Hi,
After BI SP16 Upgrade, we noticed that data load to a cube with DTP (7X DS) with partioning active, it would error out saying, "Error while updating to target " " type INFOCUBE....we applied note '1148007' and did reactivation of related structures and objects but still same error....As soon as we deactivate partioning, data load would go thru easily and successfully but we want to have partioning "Active"......I was wondering if anybody ran into this issue and get it resolved...Any help or helpful hints would be appreciated...
Thanks..

Hi,
take a look:
Error while updating to target ZXXX (type INFOCUBE)
Error while trying to make infoobject as data target
Regards
Andreas

"Error while parsing SOAP XML payload: no element found" received when invoking Web Service

Running PB 12.1 Build 7000. Using Easysoap. Error ""Error while parsing SOAP XML payload: no element found" received when invoking Web Service". This error does not appear to be coming from the application code. Noticed that there were some erroneous characters showing up within the header portion of the XML ("&Quot;"). Not sure where these are coming from. When I do a find within the PB code for """" it gets located within two objects, whereas they both reference a "temp_xml_letter". Not sure where or what temp_xml_letter resides???   The developer of this is no longer with us and my exposure to WSDL and Web Services is rather limited. Need to get this resolved...please.
This is the result of the search. Notice the extraneous characters ("""):
dar1main.pbl(d_as400_mq_xml)
darlettr.pbl(d_email_xml)
---------- Search: Searching Target darwin for 'temp_xml'    (9:52:41 AM)
---------- 2 Matches Found On "temp_xml":
dar1main.pbl(d_as400_mq_xml).d_as400_mq_xml: export.xml(usetemplate="temp_xml_letter" headgroups="1" includewhitespace="0" metadatatype=0 savemetadata=0 template=(comment="" encoding="UTF-8" name="temp_xml_letter" xml="<?xml version=~"1.0~" encoding=~"UTF-16LE~" standalone=~"yes~"?><EmailServiceTransaction xmlns=~"http://xml.xxnamespace.com/Utility/Email/EmailService" ~" xmlns:imc=~"http://xml.xxnamespace.com/IMC~" xmlns:xsi=~"http://www.w3.org/2001/XMLSchema-instance~" xmlns:root=~"http://xml.xxnamespace.com/RootTypes~" xmlns:email=~"http://xml.xxnamespace.com/Utility/Email~" xsi:schemaLocation=~"http://xml.xxnamespace.com/Utility/Email/EmailService http://dev.xxnamespace.com/Utility/Email/EmailService/V10-TRX-EmailService.xsd~"><EmailServiceInformation><EmailServiceDetail __pbband=~"detail~"><ApplicationIdentifier> applicationidentifier </ApplicationIdentifier><AddresseeInformation><AddresseeDetail><Number> number </Number></AddresseeDetail></AddresseeInformation><EmailMessageInformation><Ema
darlettr.pbl(d_email_xml).d_email_xml: export.xml(usetemplate="temp_xml_letter" headgroups="1" includewhitespace="0" metadatatype=0 savemetadata=0 template=(comment="" encoding="UTF-8" name="temp_xml_letter" xml="<?xml version=~"1.0~" encoding=~"UTF-16LE~" standalone=~"yes~"?><EmailServiceTransaction xmlns=~"http://xml.xxnamespace.com/Utility/Email/EmailService" ~" xmlns:imc=~"http://xml.xxnamespace.com/IMC~" xmlns:xsi=~"http://www.w3.org/2001/XMLSchema-instance~" xmlns:root=~"http://xml.xxnamespace.com/RootTypes~" xmlns:email=~"http://xml.xxnamespace.com/Utility/Email~" xsi:schemaLocation=~"http://xml.xxnamespace.com/Utility/Email/EmailService http://dev.xxnamespace.com/Utility/Email/EmailService/V10-TRX-EmailService.xsd~"><EmailServiceInformation><EmailServiceDetail __pbband=~"detail~"><ApplicationIdentifier> applicationidentifier </ApplicationIdentifier><AddresseeInformation><AddresseeDetail><Number> imcnumber </Number></AddresseeDetail></AddresseeInformation><EmailMessageInformation><Ema
---------- Done 2 Matches Found On "temp_xml":
---------- Finished Searching Target darwin for 'temp_xml'    (9:52:41 AM)

Maybe "extraneous" is an incorrect term. Apparantly, based upon the writeup within Wiki, the parser I am using does not interpret the """? How do I find which parser is being utilized and how to control it?
<<<
If the document is read by an XML parser that does not or cannot read external entities, then only the five built-in XML character entities (see above) can safely be used, although other entities may be used if they are declared in the internal DTD subset.
If the document is read by an XML parser that does read external entities, then the five built-in XML character entities can safely be used. The other 248 HTML character entities can be used as long as the XHTML DTD is accessible to the parser at the time the document is read. Other entities may also be used if they are declared in the internal DTD subset.
>>>

Error messag -'Error while determining ref.mov.type for WM via Table 156S:'

Hi Guys,
I am currently facing some issues with respect to the deliver creation.
The scenario is somthing like this.
I have assigned a FOC Item category to an Consignment Issue order type.
The system is able to determine the Item category successfully.
However when the delivery is created it throws an error message
'Error while determining ref.mov.type for WM via Table 156S: 903/X/X/W/L/X/'
Not sure why this occurs.
All the settings seem to be set.
If any one of you can help me out it would be great.
Thanks.
Regards,
Pandi

Dear Pandiraj
The standard process is that consignment issue order should be created with reference to Proforma invoice. Having said that I dont understand why you have assigned a FOC item category to issue order. Not sure, whether this will work. Also I feel that you should explain in detail the process for which you are configuring this.
thanks
G. Lakshmipathi

Error while determining ref.mov.type for WM via table 156S:601///

Hi SAP gurus
while doing delivery i am getting error like
Error while determining ref.mov.type for WM via table 156S:601///
please give me needful solution
regards
Sarvesh

Chk via
SPRO>LE>WM>Interfaces>IM>Define mvt>Assign MVt reference...and then LE-WM interface...
maintina the correspoding entries..
BR,
Krishna

SQL*Loader-925: Error while parsing a cursor (via ocisq)

Receiving the following error message when trying to use SQLLoader (on NT) >>>
SQL*Loader-925: Error while parsing a cursor
(via ocisq)
ORA-00942: table or view does not exist
Trying to use the application for the first time, logon using userid for which sqlplus operates, and the table does exist under the user schema, as owner.
ctl and dat file are correct. Log file gives me no further detail of the errors.
Are there any configuration settings or something required for this app?
Thanks

Thanks Warren. I was concentrating more on the first line of the error.
You are right. The issue was of insufficient privileges. The table did not have all the necessary grants provided.

AS2 Adapter Error: Error while parsing AS2 message: AUTHENTICATION_ERROR #

Hi,
Following Scenario: Inbound.
i have been receiving messages via Seeburger AS2 Adapter with the following Error message
Error while parsing AS2 message: AUTHENTICATION_ERROR #
I have done the following in the AS2 adapter as per findings in the forum
1. Unchecked the Authentication Required Flag.
2. AS2 Certificates are fine.
3. Use Authentication: Disabled (there is no authentication)
even though every thing seems to be fine i am not able to receive messages successfully. Please let me know what could have gone wrong here.

Hi Venkatesh,
>> Everything is provided in the Sender Agreement. Partners Certificate, Self Encryption & Signing certificate
How come you are using encryption when you are receiving the message. I think it might be decryption.
1. Anyway please cross check whether you provide the following correct details in Sender agreement.
Sender Configuration
Authentication Certificate : Partner's public certificate.
AS2 Receiver Configuration
Decryption Key : Own private key.
Signing Key : Own private key.
2. Can you please check and tell in the Seeburger Monitoring for the incoming message, whether they are sending the message with encryption and signing? This you can check in the Seeburger Monitoring.

Error while parsing AS2 message: DECRYPTION_ERROR in Seeburger Workbench

Dear all,
In our production SAP PI 7.1 server, we are getting the below error in the Seeburger Workbench screen.
Error:
State Error on receive, task will not be retried
"State Description Error while parsing AS2 message: DECRYPTION_ERROR # com.seeburger.ediint.edi.EDIMessageException: message decryption failed: failed to decrypt message: provider BC not found"
Imp points to note are:-
1. This error is not specific to one interface. 3-4 interface messages have this error.
2. And even for a particular interface that has this error, we could see that some messages are getting processed without any issues, and some error out, so we are not in a position to conclude anything.
Because of the above issue, many business critical messages are pending to be processed.
If any one has encountered this before error, pls share your inputs to resolve this or any workarounds to temporarily handle the issue will be appreciated.
Thanks,
Younus

Hello Younus,
We are facing exactly same problem in some of our scenarios.
It is strange that this error doesn't occur all the time ,only some messages fail with this error.
I know ,this is a worst approach,but as we couldn't find any solution,we have adopted a workaround to request partner to resend the message and this works well .
Thanks.
Regards,
Shweta

'Error while parsing a Form, Type 3 Form, or Pattern'

Similar Messages

Maybe you are looking for