Error while performing 'Receiving Transaction'

Dear contributors,
I am trying to perform a Inter Org transfer of an item from Inv A to Inv B and the shipping network is set as 'In-transit' with receipt routing as 'Inspection required'.
I was able to receive the item to my Receiving area, but while trying to Inspect the item using 'Receiving Transactions' it gives me an error - 'Quality results cannot be entered because no Collection Plans applied.
I tried setting up a collection plan in the 'Quality' responsibility for this inventory. But still it is throwing the same error.
Not sure if I am missing anything. Need your expertise to get this solved.
Thanks.
Srini

Please ignore this. I have fixed the issue.
I missed enabling the 'Receiving Transactions' and 'Inspection transactions' in the collection plan I created, which caused this error.

Similar Messages

Error while Running Receiving Transaction Manager

Hi.,
We have 11..5.10.2 on AIX 5.3 intermeditley we are getting the below error for Receiving Transaction Manager. for temporary sloution we will restart the Receiving Transaction Manager is there any permanent solution for this.....?
we have two Receiving Transaction Manager process.
Error
"APP 00204: Concurrent manager encountered an error while running the spawned
concurrent program Receiving Transaction Manager: rcvoltm TM:Timeout"

Hello.
Have a look on MOS Doc ID 1071727.1
Octavio

Getting error while running Receiving Transaction Processor

Hi all,i am getting an error in po_interface_errors after running Receiving Transaction Processor concurrent program
INTERFACE_TYPE COLUMN_NAME ERROR_MESSAGE
RCV-856 INTERFACE_TRANSACTION_ID RCV_TP_INVALID_TRX_TYPE
TABLE_NAME
RCV_TRANSACTIONS_INTERFACEI am trying to do an Inter Org transfer and i put the transaction_type as 'RECEIVE' .Can someone kindly suggest what should be the transaction_type for an Inter Org Transfer in rcv_transactions_interface table.Any help is appreciated
Thanks in advance!!

HI,
We are getting the transaction_type error eventhough the transaction_type is a valid.
Please advise.
Regards
MV

Error while comitting a transaction in oSB. The following is the error stack

Error while comitting a transaction in OSB. The following is the error stack
<Apr 20, 2015 12:00:15 AM MDT> <Error> <EJB> <BEA-010026> <Exception occurred during commit of transaction Xid=BEA1-1AE41F1CAE45F2B146FD(296700848),Status=Rolled back. [Reason=Unknown],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=2,seconds left=120,XAServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(ServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(state=new,assigned=none),xar=null,re-Registered = false),XAServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(ServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(state=rolledback,assigned=OSB_MS1),xar=WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_11603460297,re-Registered = false),XAServerResourceInfo[weblogic.jdbc.jta.DataSource]=(ServerResourceInfo[weblogic.jdbc.jta.DataSource]=(state=ended,assigned=none),xar=CMSDS,re-Registered = false),SCInfo[OSB_PRDKS_DOMAIN+OSB_MS1]=(state=rolledback),SCInfo[SOA_PRDKS_DOMAIN+SOA_MS2]=(state=pre-prepared),properties=({}),local properties=({weblogic.jdbc.jta.CMSDS=[ No XAConnection is attached to this TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=OSB_MS1+soaprd-vip-osb-ms1.cos.is.keysight.com:8001+OSB_PRDKS_DOMAIN+t3+, XAResources={eis/wls/Queue, WEDB_EVEREST_OSB_PRDKS_DOMAIN, XREFDS_OSB_PRDKS_DOMAIN, eis/activemq/Queue, CustomSchemaDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS1_OSB_PRDKS_DOMAIN, eis/tibjmsDirect/Queue, eis/jbossmq/Queue, eis/Apps/Apps, MobileApps_AOS_MDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_DRDS_OSB_PRDKS_DOMAIN, WSATGatewayRM_OSB_MS1_OSB_PRDKS_DOMAIN, eis/webspheremq/Queue, eis/AQ/aqSample, SBLPROD_OSB_PRDKS_DOMAIN, wlsbjmsrpDataSource_OSB_PRDKS_DOMAIN, eis/aqjms/Queue, CMSDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_WseeFileStore_auto_1, FAP_OSB_PRDKS_DOMAIN, eis/sunmq/Queue, eis/pramati/Queue, FMWAPPDS_OSB_PRDKS_DOMAIN, weblogic.jdbc.jta.DataSource, GSDC_OSB_PRDKS_DOMAIN, eis/tibjms/Topic, eis/fioranomq/Topic, WLStore_OSB_PRDKS_DOMAIN_FileStore_MS1, PresidioOracleAppsDS_OSB_PRDKS_DOMAIN, GSDCDS_OSB_PRDKS_DOMAIN, eis/aqjms/Topic, CustOutDS_OSB_PRDKS_DOMAIN, OFMW/Logging/BAM, MobileAppsDS_OSB_PRDKS_DOMAIN, FIDDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN__WLS_OSB_MS1, HRMSDS_OSB_PRDKS_DOMAIN, WEDB_OSB_PRDKS_DOMAIN, OracleAppsDS_OSB_PRDKS_DOMAIN, eis/wls/Topic, eis/tibjms/Queue, eis/tibjmsDirect/Topic, IntrastatDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_COSDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS2_OSB_PRDKS_DOMAIN, EVEREST_WEDB_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1, Everest_OSB_PRDKS_DOMAIN},NonXAResources={})],CoordinatorURL=SOA_MS2+soaprd-vip-soa-ms2.cos.is.keysight.com:8002+SOA_PRDKS_DOMAIN+t3+): javax.transaction.SystemException: Lost connection to server while commit was in progress, ignoring because initiating server is not coordinating server. Remote Exception received=weblogic.rjvm.PeerGoneException: ; nested exception is:
        java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
        java.io.InvalidClassException: oracle.jdbc.xa.OracleXAException; local class incompatible: stream classdesc serialVersionUID = -2542408691177300269, local class serialVersionUID = -4551795881821760665
        at weblogic.transaction.internal.TransactionImpl.commit(TransactionImpl.java:376)
        at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:237)
        at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:224)
        at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:552)
        at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:423)
        at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:325)
        at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
        at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
        at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
        at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
        at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
        at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

Hi,
Have you tried Cancelling the release before adding the version?
Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
Please let me know if it worked!
Vijay

Error while performing Risk Analysis at user level for a cross system user

Dear All,
I am getting the below error, while performing the risk analysis at user level for a cross system (Oracle) user.
The error is as follows:
"ResourceException in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.connector.exceptions.BaseResourceException: Cannot get connection for 120 seconds. Possible reasons: 1) Connections are cached within SystemThread(can be any server service or any code invoked within SystemThread in the SAP J2EE Engine), 2) The pool size of adapter "SAPJ2EDB" is not enough according to the current load of the system or 3) The specified time to wait for connection is not enough according to the pool size and current load of the system. In case 1) the solution is to check for cached connections using the Connector Service list-conns command, in case 2) to increase the size of the pool and in case 3) to increase the time to wait for connection property. In case of application thread, there is an automatic mechanism which detects unclosed connections and unfinished transactions.RC:1
Can anyone please help.
Regards,
Gurugobinda

Hi..
Check the note # SAP Note 1121978
SAP Note 1121978 - Recommended settings to improve peformance risk analysis.
Check for the following...
CONFIGTOOL>SERVER>MANAGERS>THREADMANAGER
ChangeThreadCountStep =50
InitialThreadCount= 100
MaxThreadCount =200
MinThreadCount =50
Regards
Gangadhar

Error while resubmit the transaction in Oracle 10g B2B

Hi All,
I am facing the below error while resubmitting the transactions
bash-3.00$ java oracle.tip.adapter.b2b.data.ReSubmit
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/tip/adapter/b2b/data/ReSubmit
bash-3.00$
Regards
sekhar

Hi Sekhar,
Make sure that you are setting the environment first by running Midtier_Home\ip\install\setenv.bat OR Midtier_Home\ip\install\setenv.sh (according to your OS). Run the resubmit command after executing this setenv file.
Regards,
Anuj

Error while posting FB50 transaction code

Hi I am getting the below error while doing FB50 transaction code. Please help me
My company code is using EUR & country is Greece
Company code not assigned to country or country to calculation procedure
Message no. FF703
Diagnosis
An error occurred when checking the tax code. Either the assignment of company code and country or of country and calculation procedure is not correct.
Procedure
Check the system settings.
To do this, choose Maintain entries (F5).
If the program error occurred
In a standard SAP program, then create an OSS message
In a program you wrote yourself, then correct the program.
Thanks
Kishore

Hi
Go to OBBG -->Assign Country to Calculation Procedure and assign the Tax procedure( ie like TAXIN) to the GREECE Country.
This helps you resolve your issue.
Regards
Venkat

Error while posting tresury transaction

hi gurus,
i got the error , while excuting treasury transaction:
Inconsistent currency information
Message no. F5725
Diagnosis
Company code '1000' has currency type '10'. This currency type has the currency key 'SAR' in the financial accounting application.
The same currency type is conveyed to financial accounting across the accounting interface with currency key 'EUR'
System Response
Currency data conveyed with this key cannot be processed in the financial accounting module.
Procedure
This is a system error in the calling application.
Currency type '10' in company code '1000' must have currency key 'EUR' when the data is transmitted.)
Kinldy help to resolve this issue.

Hi All,
I am facing the same issue..Can U pls help me in resolving the error.
ERROR:
Inconsistent currency information
Message no. F5725
Diagnosis
Company code '6242' has currency type '10'. This currency type has the currency key 'SGD' in the financial accounting application.
The same currency type is conveyed to financial accounting across the accounting interface with currency key 'INR'
System Response
Currency data conveyed with this key cannot be processed in the financial accounting module.
Procedure
This is a system error in the calling application.
Currency type '10' in company code '6242' must have currency key 'INR' when the data is transmitted.
Regards,
Venkat

DPM encountered an error while performing an operation for \\?\Volume{fc1f0549-9865-4349-b4df-8596a19ad7fe}\FolderPath\Work\ on FileServer (ID 2033 Details: The system cannot find the path specified (0x80070003))

DPM encountered an error while performing an operation for \\?\Volume{fc1f0549-9865-4349-b4df-8596a19ad7fe}\FolderPath\Work\ on FileServer (ID 2033 Details: The system cannot find the path specified (0x80070003))
Can I know what this mean? It completely fail all entire job.
Backup was on half way go, it already took about 3TB data and it fail.

Hi Oneoa,
Please verify the antivirus exeptions. Look at this two links for more information:
http://technet.microsoft.com/en-us/library/ff399439.aspx
http://support.microsoft.com/kb/928840
I hope this solves your problem, please post your progress so I may assist you further.
Best Regards
Robert Hedblom
MVP DPM
Check out my DPM blog @ http://robertanddpm.blogspot.com

System is giving ABAP run time error while perform LT06 or create TO with r

Hi SAP WM Gurus,
System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
Short dump has not been completely stored. It is too big.
P_MENGA = P_MENGE.
007940 P_UMREZ = 1.
007950 P_UMREN = 1.
Can you give any idea on this issue.
Thanks and Regards,
SHARAN.

Hi,
Go to Tcode ST22 and mentione the dump code there and check.
Also take help[ of Abapers to fix it.
Thanks
Utsav

ABAP run time error while perform LT06 or create TO with respect to posting

Hi SAP WM Gurus,
System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
>> Short dump has not been completely stored. It is too big.
>       P_MENGA = P_MENGE.
007940       P_UMREZ = 1.
007950       P_UMREN = 1.
Can you give any idea on this issue.
Thanks and Regards,
SHARAN.

This part is just the place in the program where the error occured, but why the error occured is mentioned earlier in the dump.
Maybe you have a too big number in the field and hence a field overflow, maybe you have a character instead of a number in the field.
Read the dump from the beginning. if you dont know how to read a dump,then try to get help from any local Abaper.

Error while performing Oracle 11g upgrade

Hi,
I am facing error while performing an Oracle upgrade from 10.2.0.4 to 11.2.0.2.
DBUA was disconnected with error Ora 1092 Oracle instance terminated.
When tried to run manual upgrade it is showing the below error,
SQL> @catupgrd.sql
DOC>#######################################################################
DOC>#######################################################################
DOC>
DOC> The first time this script is run, there should be no error messages
DOC> generated; all normal upgrade error messages are suppressed.
DOC>
DOC> If this script is being re-run after correcting some problem, then
DOC> expect the following error which is not automatically suppressed:
DOC>
DOC> ORA-00001: unique constraint (<constraint_name>) violated
DOC> possibly in conjunction with
DOC> ORA-06512: at "<procedure/function name>", line NN
DOC>
DOC> These errors will automatically be suppressed by the Database Upgrade
DOC> Assistant (DBUA) when it re-runs an upgrade.
DOC>
DOC>#######################################################################
DOC>#######################################################################
DOC>#
DOC>######################################################################
DOC>######################################################################
DOC> The following statement will cause an "ORA-01722: invalid number"
DOC> error if the user running this script is not SYS. Disconnect
DOC> and reconnect with AS SYSDBA.
DOC>######################################################################
DOC>######################################################################
DOC>#
no rows selected
DOC>######################################################################
DOC>######################################################################
DOC> The following statement will cause an "ORA-01722: invalid number"
DOC> error if the database server version is not correct for this script.
DOC> Perform "ALTER SYSTEM CHECKPOINT" prior to "SHUTDOWN ABORT", and use
DOC> a different script or a different server.
DOC>######################################################################
DOC>######################################################################
DOC>#
SELECT TO_NUMBER('MUST_BE_11_2') FROM v$instance
ERROR at line 1:
ORA-01722: invalid number
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Please help ASAP as this is a production system.
Thanks,
Prabhakar
Edited by: prabhakaryc on Jun 19, 2011 2:47 PM

prabhakaryc wrote:
Hi Orkun Gedik,
>
> Thank you for your quick reply.
>
> Yes i am running this on windows and i have set with correct ORACLE_HOME (11202 directory)
>
> Do you think any other reason ?
>
> I have seen this error log inside of catupgrd.sql and it seems to be very known error but i am not finding the solution anywhere ?
>
> Your quick reply helps me a lot.
>
> Thanks,
> Prabhakar
Hi Prabhakar,
>> DBUA was disconnected with error Ora 1092 Oracle instance terminated.
But, as far as I understand that you didn't completed DB upgrade succesfully. Under this circumstance, you shouldn't change ORACLE_HOME variable to 11.2.0.2. I suggest you that complete Oracle upgrade (restart DBUA) and do not execute upgrade procedures, manually.
Best regards,
Orkun Gedik

Getting Error Invalid Cost Group while performing MTL Transaction.

Hi All,
I am performing mtl transactions for wip issue. I am able to insert the data into the MTL_TRANSACTIONS_INTERFACE table but when i call the seeded concurrent program "Process transaction interface (Process transaction interface)" then i am getting the following error:
"Invalid Cost Group-Cost Group is either not entered or not valid for the given organization".
I am using the the table "CST_COST_GROUPS" to validate the cost group while inserting into the MTL_TRANSACTIONS_INTERFACE .
Please suggest me how to overcome the error.
Thanks,
Nisheeth

Were you able to do the same tranasction manually (i.e. without the interface)?
Try that and see if you get an error.
I have a feeling that you may have Key flexfield security rules that prohibit using that a/c.
The other way to verify this is to find a cost group (the default one) that works ; modify the a/c to be the new accounts and then perform an interface transaction.
See if you get an error. If you do, then certainly the problem lies with one of the accounts. After that, you can start changing one a/c at a time to identify the culprit.
Sandeep Gandhi

Connection error while performing basic settings SOLMAN 4.0 SP12

Hi All,
We are currently facing a problem while performing Solution Manager 4.0 (SP12) basic configurations through the IMG Wizard. Within the "Initial Configuration Part I" section, an error while connecting to SAP is obtained (This is the full error message "Error creating communication to SAP Service and Support"). After checking at TX SM59, it was noticed that the RFC connections SAP-OSS y SAP-OSS-LIST-O01 (what are supposed to be created in previous steps by copying SAPOSS connection) were no created. We created them both manually (also tested) and everything was ok. We started the Wizard again, and the same error was obtained. However, it was noticed that the SAP-OSS RFC connection had been deleted. The system log shows the following:
00789 - Dialog work process No. 000 - XXXXXX - EQUIPO - 1 - SM_CONFIG_WZ - M_CONFIG_WZ_START - T - Transaction Problem - STSK
The same scenario occurs every time the above wizard is used.
It worth to mention that the SAPOSS connection works fine and also, just to perform a test, I was able to download a note correction through the SNOTE transaction.
Where should I check to see what is causing this connection error? Do I missing a previous configuration step?
Also, would be very helpful for us to get an step by step reference guide for SM configuration. We want to be sure we are no missing or mixed up anything.
Thanks so much for your help.
Regards

>
diego77 wrote:
> We are currently facing a problem while performing Solution Manager 4.0 (SP12) basic configurations through the IMG Wizard.
Why do you start configuration for SP12, although most current version is SolMan 7.0 EhP1 SPS19?
What scenarios / functions are you planning to use?
Best regards,
Ruediger

Error While doing ABT1N transaction

Hi,
I am facing the below error while doing ABT1N in Asset Accounting.Please help me in fixing this Issue.
Error Message -No depreciation area for receiving the revenue
Message no.AAPO149
Diagnosis
You tried to post a retirement on asset 1000 100007-0.You entered transaction type 300,in which the retirement with revenue indicator is not set
You tried to transfer asset 1000 100007-0.According to transfer variant 0001,none of the areas on the asset uses a transaction type for retirement with revenue
In both of these cases, you are not allowed to enter revenue or make specifications for the determination of revenue.
Proceedure
Check the transfer variant and check your entry
please do the needful
Thanks
Supriya

Hello,
You will have a check box for the same.
Double click on transaction type, you will see the check box for revenue.
Otherwise, tomorrow I will get back to you once I am in front of the system.
Regards,
Ravi
Edited by: Ravi Sankar Venna on May 5, 2009 7:53 PM

Error while performing 'Receiving Transaction'

Similar Messages

Maybe you are looking for