Error while performing tranfer posting

Hi All,
The system is giving me the following error message while I am trying to do a transfer between storage location to storage location (with in plant mb1b mvt type 311). Please suggest the config that I am missing
Error message: "storage bin 015 922 U-Zone does not exist please check your entry"
FYI: 015 is the whs number
Thank you

Hi,
User LX20, and enter the Warehouse No.
Thanks
Aktar

Similar Messages

ABAP run time error while perform LT06 or create TO with respect to posting

Hi SAP WM Gurus,
System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
>> Short dump has not been completely stored. It is too big.
>       P_MENGA = P_MENGE.
007940       P_UMREZ = 1.
007950       P_UMREN = 1.
Can you give any idea on this issue.
Thanks and Regards,
SHARAN.

This part is just the place in the program where the error occured, but why the error occured is mentioned earlier in the dump.
Maybe you have a too big number in the field and hence a field overflow, maybe you have a character instead of a number in the field.
Read the dump from the beginning. if you dont know how to read a dump,then try to get help from any local Abaper.

DPM encountered an error while performing an operation for \\?\Volume{fc1f0549-9865-4349-b4df-8596a19ad7fe}\FolderPath\Work\ on FileServer (ID 2033 Details: The system cannot find the path specified (0x80070003))

DPM encountered an error while performing an operation for \\?\Volume{fc1f0549-9865-4349-b4df-8596a19ad7fe}\FolderPath\Work\ on FileServer (ID 2033 Details: The system cannot find the path specified (0x80070003))
Can I know what this mean? It completely fail all entire job.
Backup was on half way go, it already took about 3TB data and it fail.

Hi Oneoa,
Please verify the antivirus exeptions. Look at this two links for more information:
http://technet.microsoft.com/en-us/library/ff399439.aspx
http://support.microsoft.com/kb/928840
I hope this solves your problem, please post your progress so I may assist you further.
Best Regards
Robert Hedblom
MVP DPM
Check out my DPM blog @ http://robertanddpm.blogspot.com

System is giving ABAP run time error while perform LT06 or create TO with r

Hi SAP WM Gurus,
System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
Short dump has not been completely stored. It is too big.
P_MENGA = P_MENGE.
007940 P_UMREZ = 1.
007950 P_UMREN = 1.
Can you give any idea on this issue.
Thanks and Regards,
SHARAN.

Hi,
Go to Tcode ST22 and mentione the dump code there and check.
Also take help[ of Abapers to fix it.
Thanks
Utsav

Error while trying to post inbound idoc of message type COND_A

Hi,
I am getting error while trying to post inbound idoc of message type COND_A.
If I left Usage & Condition field of segment E1KOMG then 'Table not available' idoc message is coming
and if providing value in above fields then dump is coming.
How to solve ?
Plz do reply
Thanks
Mohit

I do not see any reason why you would need to use COND_A04 if COND_A01 is working.
What if you could get COND_A04 to post and you would face the same result as in COND_A01?
If SAP does not check wrong values, then you have to do it yourself, or you report an incident at SAP (after you have searched for OSS notes that may have fixed this error already)
For example OSS Note 1169998 - IDoc: KONP-LIFNR values not checked
fixed a situation where the vendor number was not validated.

Error while performing Risk Analysis at user level for a cross system user

Dear All,
I am getting the below error, while performing the risk analysis at user level for a cross system (Oracle) user.
The error is as follows:
"ResourceException in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.connector.exceptions.BaseResourceException: Cannot get connection for 120 seconds. Possible reasons: 1) Connections are cached within SystemThread(can be any server service or any code invoked within SystemThread in the SAP J2EE Engine), 2) The pool size of adapter "SAPJ2EDB" is not enough according to the current load of the system or 3) The specified time to wait for connection is not enough according to the pool size and current load of the system. In case 1) the solution is to check for cached connections using the Connector Service list-conns command, in case 2) to increase the size of the pool and in case 3) to increase the time to wait for connection property. In case of application thread, there is an automatic mechanism which detects unclosed connections and unfinished transactions.RC:1
Can anyone please help.
Regards,
Gurugobinda

Hi..
Check the note # SAP Note 1121978
SAP Note 1121978 - Recommended settings to improve peformance risk analysis.
Check for the following...
CONFIGTOOL>SERVER>MANAGERS>THREADMANAGER
ChangeThreadCountStep =50
InitialThreadCount= 100
MaxThreadCount =200
MinThreadCount =50
Regards
Gangadhar

I am getting some errors while distilling the post script file.

I am getting some errors while distilling the post script file. please check and suggest me, how to control this?
<PDFX ISO="15930-1:2001" COMPLIANT="true">
PDF/X Compliance Report
1. Summary
   Warnings: The total found in this document was 0.
   Violations: The total found in this document was 0.
   No problems were found in the document.
   This document passes PDF/X-1a:2001 compliance checks.
</PDFX>
Regards,
Jack

@Jack – you were using a joboptions file by Distiller to convert a PostScript file to a PDF/X-1a.
What you get is no error message, just a report, that everything went ok. And in this case I cannot see any advantage using PDF Export for printing to PostScript/distilling to PDF. Ok, maybe one, CS5 and above would export in a background process.
To prevent InDesign flattening transparency, you could use PDF/X-4 as your export setting. You cannot use writing to PostScript for that task.
Check including tags for tagged export to prevent misalignment of text because of a strange bug with PDF Export when you are using 9pt text on 12pt leading or text with a ratio of 9/12 for point size and leading in multicolumn text frames.
Uwe

Error while performing Oracle 11g upgrade

Hi,
I am facing error while performing an Oracle upgrade from 10.2.0.4 to 11.2.0.2.
DBUA was disconnected with error Ora 1092 Oracle instance terminated.
When tried to run manual upgrade it is showing the below error,
SQL> @catupgrd.sql
DOC>#######################################################################
DOC>#######################################################################
DOC>
DOC> The first time this script is run, there should be no error messages
DOC> generated; all normal upgrade error messages are suppressed.
DOC>
DOC> If this script is being re-run after correcting some problem, then
DOC> expect the following error which is not automatically suppressed:
DOC>
DOC> ORA-00001: unique constraint (<constraint_name>) violated
DOC> possibly in conjunction with
DOC> ORA-06512: at "<procedure/function name>", line NN
DOC>
DOC> These errors will automatically be suppressed by the Database Upgrade
DOC> Assistant (DBUA) when it re-runs an upgrade.
DOC>
DOC>#######################################################################
DOC>#######################################################################
DOC>#
DOC>######################################################################
DOC>######################################################################
DOC> The following statement will cause an "ORA-01722: invalid number"
DOC> error if the user running this script is not SYS. Disconnect
DOC> and reconnect with AS SYSDBA.
DOC>######################################################################
DOC>######################################################################
DOC>#
no rows selected
DOC>######################################################################
DOC>######################################################################
DOC> The following statement will cause an "ORA-01722: invalid number"
DOC> error if the database server version is not correct for this script.
DOC> Perform "ALTER SYSTEM CHECKPOINT" prior to "SHUTDOWN ABORT", and use
DOC> a different script or a different server.
DOC>######################################################################
DOC>######################################################################
DOC>#
SELECT TO_NUMBER('MUST_BE_11_2') FROM v$instance
ERROR at line 1:
ORA-01722: invalid number
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Please help ASAP as this is a production system.
Thanks,
Prabhakar
Edited by: prabhakaryc on Jun 19, 2011 2:47 PM

prabhakaryc wrote:
Hi Orkun Gedik,
>
> Thank you for your quick reply.
>
> Yes i am running this on windows and i have set with correct ORACLE_HOME (11202 directory)
>
> Do you think any other reason ?
>
> I have seen this error log inside of catupgrd.sql and it seems to be very known error but i am not finding the solution anywhere ?
>
> Your quick reply helps me a lot.
>
> Thanks,
> Prabhakar
Hi Prabhakar,
>> DBUA was disconnected with error Ora 1092 Oracle instance terminated.
But, as far as I understand that you didn't completed DB upgrade succesfully. Under this circumstance, you shouldn't change ORACLE_HOME variable to 11.2.0.2. I suggest you that complete Oracle upgrade (restart DBUA) and do not execute upgrade procedures, manually.
Best regards,
Orkun Gedik

Connection error while performing basic settings SOLMAN 4.0 SP12

Hi All,
We are currently facing a problem while performing Solution Manager 4.0 (SP12) basic configurations through the IMG Wizard. Within the "Initial Configuration Part I" section, an error while connecting to SAP is obtained (This is the full error message "Error creating communication to SAP Service and Support"). After checking at TX SM59, it was noticed that the RFC connections SAP-OSS y SAP-OSS-LIST-O01 (what are supposed to be created in previous steps by copying SAPOSS connection) were no created. We created them both manually (also tested) and everything was ok. We started the Wizard again, and the same error was obtained. However, it was noticed that the SAP-OSS RFC connection had been deleted. The system log shows the following:
00789 - Dialog work process No. 000 - XXXXXX - EQUIPO - 1 - SM_CONFIG_WZ - M_CONFIG_WZ_START - T - Transaction Problem - STSK
The same scenario occurs every time the above wizard is used.
It worth to mention that the SAPOSS connection works fine and also, just to perform a test, I was able to download a note correction through the SNOTE transaction.
Where should I check to see what is causing this connection error? Do I missing a previous configuration step?
Also, would be very helpful for us to get an step by step reference guide for SM configuration. We want to be sure we are no missing or mixed up anything.
Thanks so much for your help.
Regards

>
diego77 wrote:
> We are currently facing a problem while performing Solution Manager 4.0 (SP12) basic configurations through the IMG Wizard.
Why do you start configuration for SP12, although most current version is SolMan 7.0 EhP1 SPS19?
What scenarios / functions are you planning to use?
Best regards,
Ruediger

JCAActivationAgent::load - Error while performing endpoint activation:java.

Hi,
I am getting following error while deploying a BPEL process. This is very surprising because the process used to run fine until yesterday. Also for some time I was getting a funny error - the JDev was not able to "read" a wsdl file on local machine. I restarted the server, machine many times but it did not help. I do not have any proxies set and the file resides on my local harddrive.
<2006-04-11 11:30:20,090> <ERROR> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::load - Er
ror while performing endpoint activation:java.lang.NullPointerException
<2006-04-11 11:30:20,090> <ERROR> <default.collaxa.cube.activation> <AdapterFramework::Inbound>
java.lang.NullPointerException
at oracle.tip.adapter.fw.agent.jca.JCAActivationAgent.load(JCAActivationAgent.java:208)
at com.collaxa.cube.engine.core.BaseCubeProcess.loadActivationAgents(BaseCubeProcess.java:931)
at com.collaxa.cube.engine.core.BaseCubeProcess.load(BaseCubeProcess.java:302)
at com.collaxa.cube.engine.deployment.CubeProcessFactory.create(CubeProcessFactory.java:66)
at com.collaxa.cube.engine.deployment.CubeProcessLoader.create(CubeProcessLoader.java:391)
at com.collaxa.cube.engine.deployment.CubeProcessLoader.load(CubeProcessLoader.java:302)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.loadAndBind(CubeProcessHolder.java:881)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.getProcess(CubeProcessHolder.java:789)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.loadAll(CubeProcessHolder.java:361)
at com.collaxa.cube.engine.CubeEngine.loadAllProcesses(CubeEngine.java:960)
at com.collaxa.cube.admin.ServerManager.loadProcesses(ServerManager.java:284)
at com.collaxa.cube.admin.ServerManager.loadProcesses(ServerManager.java:250)
at com.collaxa.cube.ejb.impl.ServerBean.loadProcesses(ServerBean.java:219)
at IServerBean_StatelessSessionBeanWrapper14.loadProcesses(IServerBean_StatelessSessionBeanWrapper14.java:2399)
at com.collaxa.cube.admin.agents.ProcessLoaderAgent$ProcessJob.execute(ProcessLoaderAgent.java:395)
at org.quartz.core.JobRunShell.run(JobRunShell.java:141)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:281)
<2006-04-11 11:30:20,152> <ERROR> <default.collaxa.cube.engine.deployment> <CubeProcessLoader::create>
<2006-04-11 11:30:20,152> <ERROR> <default.collaxa.cube.engine.deployment> Process "CallHomeBPEL" (revision "1.0") load FAILE
D!!
<2006-04-11 11:30:20,230> <ERROR> <default.collaxa.cube.engine.deployment> <CubeProcessHolder::loadAll> Error while loading p
rocess 'CallHomeBPEL', rev '1.0': Error while loading process.
The process domain encountered the following errors while loading the process "CallHomeBPEL" (revision "1.0"): null.
If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.
Please help.

Finally , I was able to redeploy the process. After comparing new files with old files I observed an activationAgents entry in bpel.xml, which was not present previously.
<activationAgents>
<activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="CallHomeFileUtility">
<property name="portType">Read_ptt</property>
</activationAgent>
</activationAgents>
when I removed this from bpel.xml the process deployed successfully. Not sure when the <activationAgents> is added to bpel.xml
Thanks for your inputs.

Error while doing transfer posting

Hi,
While doing transfer posting I am getting an error given below:
"Deficit of SL Bl.stock returns 10 SU : (material) (plant) (stor loc)"
Please help me in this regard.
Thanks in advance.
Sonal

Hi,
Please check once again. There is a deficit of stock in the storage location in the plant. I guess you are mentioning the incorrect s.loc in mb1b.
Also check if there is any return material in the storage loc.
Regards,
satyajit
Edited by: Satyajit Kumar on Dec 23, 2008 11:24 AM
Edited by: Satyajit Kumar on Dec 23, 2008 11:25 AM

Error while performing Organisational Assignment

Hi ,
Administrators - Rec, Pay, Tim have been created in the group Spb.
While performing the action - organisational assignments rec(personnel admin), Tim (time), pay(payr admin) of the group spb have been assigned to subarea - 225, Business area-224 and payroll area-46
The error is found to be 225rec does not exist in T526 entry.
Thanks
Gracy

hi Gracy,
Maintain the adminstror 225 in the table T526 through sm30-maintain.
If any let us know.
Regards,
sai.

Error while performing Exit Action

Hi All,
Getting error message "Organization Reassignment not permitted" while performing the exit action. I have checked the personnel area attributes and everything seems to be same. But in the infotype view indicator it is showing the value as 10.
Can we change IVWID value in se16 - > pa0003 table to 40 instead of 10. If yes can anyone tell me how to do it.. By doing this will the error message "Organization reassignment not permitted" will be resolved?
I have read the documentation of the error and i feel it seems to be the issue of "IVWID"..
Can this be dealt with????
Regards,
Srikanth

Hi Mohan,
The information provided by you was very helpful. Thanks a lot for your quick responses..
Tthe entries in IVWID feauture for country grouping india is 40 . The value defaulted is correct. Is there any other way where we can change the infotype view indicator to 40 instead of 10..
Can you suggest me a solution which would not impact other application's...
Regards,
Srikanth

POP UP needed for an ERROR while performing an action

Hello Experts,
I need your help in creating a pop up for an error that occurs while performing an action and the value for a certain field in an infotype is incorrect. Right now the error just gets displayed in the bottom of the screen. Immediate responses would be highly appreciated!

check here http://scn.sap.com/community/erp/hcm/employee-self-service/blog/2013/12/02/how-to-show-pop-up-s-in-wda-hcmpf http://scn.sap.com/thread/3497688

Error while running forge post Endeca integration with ATG

Hi All,
We have integrated Endeca application with ATG and then tried running the Endeca baseline update script. However the script failed with the below error message
Parsing XML dimensions data with validation turned on
Parsing project file "C:\apps\ATGSample\data\forge_output\ATGSample.xml" (project="ATGSample")
XMLParser: Reading dimensions, dvals, and synonyms from file "C:\apps\ATGSample\data\forge_output\\ATGSample.dimensions.xml"
ERROR 06/07/13 05:15:57.022 UTC (1370582157018) DGIDX {dgidx,baseline} Internal error while decompressing input stream: null
FATAL 06/07/13 05:15:57.022 UTC (1370582157018) DGIDX {dgidx,baseline} Fatal error at file , line 0, char 0; Message: An exception occurred! Type:RuntimeException, Message:The primary document entity could not be opened. Id=C:\apps\ATGSample\data\forge_output\\ATGSample.dimensions.xml
WARN 06/07/13 05:15:57.022 UTC (1370582157019) DGIDX {dgidx,baseline} Lexer/OLT log: level=-1: 2013/06/07 10:45:57 | INFO | Disabling log callback
We checked the physical location of forge output and found that there is no file called 'ATGSample.dimensions.xml '
However, when we manually placed this file in the forge output folder and ran dgidx alone, the baseline update failed with the below error
Parsing XML dimensions data with validation turned on
Parsing project file "C:\apps\ATGSample\data\forge_output\ATGSample.xml" (project="ATGSample")
XMLParser: Reading dimensions, dvals, and synonyms from file "C:\apps\ATGSample\data\forge_output\\ATGSample.dimensions.xml"
ERROR 06/07/13 05:15:57.022 UTC (1370582157018) DGIDX {dgidx,baseline} Internal error while decompressing input stream: null
FATAL 06/07/13 05:15:57.022 UTC (1370582157018) DGIDX {dgidx,baseline} Fatal error at file , line 0, char 0; Message: An exception occurred! Type:RuntimeException, Message:The primary document entity could not be opened. Id=C:\apps\ATGSample\data\forge_output\\ATGSample.dimensions.xml
WARN 06/07/13 05:15:57.022 UTC (1370582157019) DGIDX {dgidx,baseline} Lexer/OLT log: level=-1: 2013/06/07 10:45:57 | INFO | Disabling log callback
============================================================================
=== DGIDX: Version = "6.4.0.692722"
=== Start Time : Fri Jun 07 11:04:15 2013
=== Arguments : "C:\Endeca\MDEX\6.4.0\bin\dgidx.exe -v --compoundDimSearch --lang en --out C:\apps\ATGSample\logs\dgidxs\Dgidx\Dgidx.log --dtddir C:\Endeca\MDEX\6.4.0\conf\dtd --tmpdir C:\apps\ATGSample\data\temp C:\apps\ATGSample\data\forge_output\ATGSample C:\apps\ATGSample\data\dgidx_output\ATGSample"
=== Current Directory : C:\apps\ATGSample
=== Exec Path : C:\Endeca\MDEX\6.4.0\bin\dgidx.exe
============================================================================
Language/collation in use is English (collation=endeca)
WARN 06/07/13 05:34:15.054 UTC (1370583255046) DGIDX {dgidx,baseline} Lexer/OLT log: level=-1: 2013/06/07 11:04:15 | INFO | Enabling log callback
No application configuration specified. Using "C:\apps\ATGSample\data\forge_output\ATGSample" as the application configuration prefix.
============================================================================
=== DGIDX: Starting phase "Read raw dimensions, properties, and records"
=== Current Time : Fri Jun 07 11:04:15 2013
=== Total Elapsed : 0.1131 seconds
=== User CPU Time : 0.0625 seconds
=== System CPU Time : 0.1250 seconds
=== Memory Usage : 18.44 MB
============================================================================
Parsing XML dimensions data with validation turned on
Parsing project file "C:\apps\ATGSample\data\forge_output\ATGSample.xml" (project="ATGSample")
XMLParser: Reading dimensions, dvals, and synonyms from file "C:\apps\ATGSample\data\forge_output\\ATGSample.dimensions.xml"
In Dval [id=10001] named "clothing-sku.color", the name is non-searchable.
In Dval [id=10002] named "clothing-sku.size", the name is non-searchable.
In Dval [id=10003] named "furniture-sku.woodFinish", the name is non-searchable.
In Dval [id=10093] named "product.brand", the name is non-searchable.
In Dval [id=10094] named "product.catalogId", the name is non-searchable.
In Dval [id=10006] named "product.disallowAsRecommendation", the name is non-searchable.
In Dval [id=10007] named "product.features.displayName", the name is non-searchable.
In Dval [id=10095] named "product.language", the name is non-searchable.
In Dval [id=10008] named "product.nonreturnable", the name is non-searchable.
In Dval [id=10096] named "product.priceListPair", the name is non-searchable.
In Dval [id=10009] named "product.siteId", the name is non-searchable.
In Dval [id=10010] named "sku.siteId", the name is non-searchable.
In Dval [id=10011] named "product.category", the name is non-searchable.
In Dval [id=10079] named "item.type", the name is non-searchable.
XMLParser: Done reading dimensions, dvals, and synonyms from "C:\apps\ATGSample\data\forge_output\\ATGSample.dimensions.xml"
XMLParser: Reading auto propmap file "C:\apps\ATGSample\data\forge_output\\ATGSample.auto_propmap.xml"
XMLParser: Done reading auto propmap file "C:\apps\ATGSample\data\forge_output\\ATGSample.auto_propmap.xml"
XMLParser: Reading properties from file "C:\apps\ATGSample\data\forge_output\ATGSample.prop_refs.xml"
XMLParser: Done reading properties from file "C:\apps\ATGSample\data\forge_output\ATGSample.prop_refs.xml"
XMLParser: Reading rollup properties and dimensions from file "C:\apps\ATGSample\data\forge_output\ATGSample.rollups.xml"
XMLParser: Done reading rollup properties and dimensions from file "C:\apps\ATGSample\data\forge_output\ATGSample.rollups.xml"
XMLParser: Reading record spec property from file "C:\apps\ATGSample\data\forge_output\ATGSample.record_spec.xml"
XMLParser: Property "common.id" is a record spec property.
XMLParser: Done reading record specs from "C:\apps\ATGSample\data\forge_output\ATGSample.record_spec.xml"
XMLParser: Reading record filter properties from file "C:\apps\ATGSample\data\forge_output\ATGSample.record_filter.xml"
XMLParser: Done reading record filter properties from file "C:\apps\ATGSample\data\forge_output\ATGSample.record_filter.xml"
XMLParser: Creating dimensions from dvals.
XMLParser: Reading rollup properties and dimensions from file "C:\apps\ATGSample\data\forge_output\ATGSample.rollups.xml"
XMLParser: Done reading rollup properties and dimensions from file "C:\apps\ATGSample\data\forge_output\ATGSample.rollups.xml"
XMLParser: Reading dimensions from file "C:\apps\ATGSample\data\forge_output\ATGSample.dimension_refs.xml"
XMLParser: Done reading dimensions from file "C:\apps\ATGSample\data\forge_output\ATGSample.dimension_refs.xml"
XMLParser: Reading dimension groups from file "C:\apps\ATGSample\data\forge_output\ATGSample.dimension_groups.xml"
XMLParser: Done reading dimension groups from file "C:\apps\ATGSample\data\forge_output\ATGSample.dimension_groups.xml"
XMLParser: Reading precedence rules from file "C:\apps\ATGSample\data\forge_output\ATGSample.precedence_rules.xml"
XMLParser: Done reading precedence rules from file "C:\apps\ATGSample\data\forge_output\ATGSample.precedence_rules.xml"
XMLParser: Reading dval refs from file "C:\apps\ATGSample\data\forge_output\ATGSample.dval_refs.xml"
XMLParser: Done reading dval refs from file "C:\apps\ATGSample\data\forge_output\ATGSample.dval_refs.xml"
XMLParser: Reading dval ranks from file "C:\apps\ATGSample\data\forge_output\ATGSample.dval_ranks.xml"
XMLParser: Done reading dval ranks from file "C:\apps\ATGSample\data\forge_output\ATGSample.dval_ranks.xml"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10079] "item.type"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10094] "product.catalogId"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10095] "product.language"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10009] "product.siteId"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10001] "clothing-sku.color"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10007] "product.features.displayName"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10006] "product.disallowAsRecommendation"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10002] "clothing-sku.size"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10003] "furniture-sku.woodFinish"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10008] "product.nonreturnable"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10093] "product.brand"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10096] "product.priceListPair"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10010] "sku.siteId"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10011] "product.category"
XMLParser: Reading refinement config from file "C:\apps\ATGSample\data\forge_output\ATGSample.refinement_config.xml"
XMLParser: Done reading refinement config from file "C:\apps\ATGSample\data\forge_output\ATGSample.refinement_config.xml"
XMLParser: Reading dimension search index configuration from file "C:\apps\ATGSample\data\forge_output\ATGSample.dimsearch_index.xml"
XMLParser: Done reading dimension search index configuration from file "C:\apps\ATGSample\data\forge_output\ATGSample.dimsearch_index.xml"
XMLParser: Reading record search index configuration from file "C:\apps\ATGSample\data\forge_output\ATGSample.recsearch_indexes.xml"
XMLParser: Done reading record search index configuration from file "C:\apps\ATGSample\data\forge_output\ATGSample.recsearch_indexes.xml"
XMLParser: Reading record search interface configuration from file "C:\apps\ATGSample\data\forge_output\ATGSample.recsearch_config.xml"
XMLParser: Done reading record search interface configuration from file "C:\apps\ATGSample\data\forge_output\ATGSample.recsearch_config.xml"
WARN 06/07/13 05:34:15.288 UTC (1370583255283) DGIDX {dgidx,baseline} Errors while parsing record search interface configuration from file "C:\apps\ATGSample\data\forge_output\ATGSample.recsearch_config.xml": RETURN_RELRANK_SCORE no longer supported. Search interface member "allAncestors.displayName" in interface "All" is not a property or dimension Search interface member "product.displayName" in interface "All" is not a property or dimension Search interface member "sku.displayName" in interface "All" is not a property or dimension Cannot put search interface member "product.features.displayName" into the search interface "All" because it has not been enabled for full-text search Cannot put search interface member "product.brand" into the search interface "All" because it has not been enabled for full-text search Search interface member "product.repositoryId" in interface "All" is not a property or dimension Search interface member "sku.repositoryId" in interface "All" is not a property or dimension Search interface member "product.briefDescription" in interface "All" is not a property or dimension Search interface member "product.description" in interface "All" is not a property or dimension Search interface member "product.longDescription" in interface "All" is not a property or dimension Search interface member "product.keywords" in interface "All" is not a property or dimension Cannot put search interface member "clothing-sku.color" into the search interface "All" because it has not been enabled for full-text search Cannot put search interface member "clothing-sku.size" into the search interface "All" because it has not been enabled for full-text search Cannot put search interface member "furniture-sku.woodFinish" into the search interface "All" because it has not been enabled for full-text search Search interface member "sku.manufacturer_part_number" in interface "All" is not a property or dimension
XMLParser: Reading search chars from file "C:\apps\ATGSample\data\forge_output\ATGSample.search_chars.xml"
XMLParser: Done reading search chars from file "C:\apps\ATGSample\data\forge_output\ATGSample.search_chars.xml"
XMLParser: Reading language stemming settings from file "C:\apps\ATGSample\data\forge_output\ATGSample.stemming.xml"
XMLParser: Done reading per-language stemming settings from file "C:\apps\ATGSample\data\forge_output\ATGSample.stemming.xml"
Default language English manually configured to use static word forms.
XMLParser: Reading word forms from file "C:\Endeca\MDEX\6.4.0\conf\stemming\en_word_forms_collection.xml"
XMLParser: Done reading word forms from file "C:\Endeca\MDEX\6.4.0\conf\stemming\en_word_forms_collection.xml". There are 50374 word forms.
XMLParser: Reading language config from file "C:\apps\ATGSample\data\forge_output\ATGSample.languages.xml"
XMLParser: Done reading language config from file "C:\apps\ATGSample\data\forge_output\ATGSample.languages.xml"
XMLParser: Reading stop words from file "C:\apps\ATGSample\data\forge_output\ATGSample.stop_words.xml"
XMLParser: Done reading stop words from file "C:\apps\ATGSample\data\forge_output\ATGSample.stop_words.xml", finished in 0.0039 seconds.
FATAL 06/07/13 05:34:17.616 UTC (1370583257616) DGIDX {dgidx,baseline} ENE Indexer: Error processing records file.
WARN 06/07/13 05:34:17.616 UTC (1370583257616) DGIDX {dgidx,baseline} Lexer/OLT log: level=-1: 2013/06/07 11:04:17 | INFO | Disabling log callback

I've seen this type of error before when Forge is configured to read multiple files with spec *.xml. Is that how you've configured your record adapter? This configuration then collides with Forge XML config files merged into the same data/processing directory.
From memory there's a couple of solutions for this - one might be to give the files a common name prefix if that's feasible, e.g. _data*.xml. You could use a sub-directory to separate the files, but you'd need to modify your copy scripts.

Error while performing tranfer posting

Similar Messages

Maybe you are looking for